Substrate independent silver nanoparticle based antibacterial coatings

An effective antibiofilm strategy based on bacteriophages armed with silver nanoparticles

The emerging antibiotic resistance in pathogenic bacteria is a key problem in modern medicine that has led to a search for novel therapeutic strategies. A potential approach for managing such bacteria involves the use of their natural killers, namely lytic bacteriophages. Another effective method involves the use of metal nanoparticles with antimicrobial properties. However, the use of lytic phages armed with nanoparticles as an effective antimicrobial strategy, particularly with respect to biofilms, remains unexplored. Here, we show that T7 phages armed with silver nanoparticles exhibit greater efficacy in terms of controlling bacterial biofilm, compared with phages or nanoparticles alone. We initially identified a novel silver nanoparticle-binding peptide, then constructed T7 phages that successfully displayed the peptide on the outer surface of the viral head. These recombinant, AgNP-binding phages could effectively eradicate bacterial biofilm, even when used at low concentrations. Additionally, when used at concentrations that could eradicate bacterial biofilm, T7 phages armed with silver nanoparticles were not toxic to eukaryotic cells. Our results show that the novel combination of lytic phages with phage-bound silver nanoparticles is an effective, synergistic and safe strategy for the treatment of bacterial biofilms.

Nanotechnology's frontier in combatting infectious and inflammatory diseases: prevention and treatment

Inflammation-associated diseases encompass a range of infectious diseases and non-infectious inflammatory diseases, which continuously pose one of the most serious threats to human health, attributed to factors such as the emergence of new pathogens, increasing drug resistance, changes in living environments and lifestyles, and the aging population. Despite rapid advancements in mechanistic research and drug development for these diseases, current treatments often have limited efficacy and notable side effects, necessitating the development of more effective and targeted anti-inflammatory therapies. In recent years, the rapid development of nanotechnology has provided crucial technological support for the prevention, treatment, and detection of inflammation-associated diseases. Various types of nanoparticles (NPs) play significant roles, serving as vaccine vehicles to enhance immunogenicity and as drug carriers to improve targeting and bioavailability. NPs can also directly combat pathogens and inflammation. In addition, nanotechnology has facilitated the development of biosensors for pathogen detection and imaging techniques for inflammatory diseases. This review categorizes and characterizes different types of NPs, summarizes their applications in the prevention, treatment, and detection of infectious and inflammatory diseases. It also discusses the challenges associated with clinical translation in this field and explores the latest developments and prospects. In conclusion, nanotechnology opens up new possibilities for the comprehensive management of infectious and inflammatory diseases.

Novel Antibacterial Materials and Coatings-A Perspective by the Editors

The fight between humans and bacteria has escalated to a new level.

Transforming Spirulina maxima Biomass into Ultrathin Bioactive Coatings Using an Atmospheric Plasma Jet: A New Approach to Healing of Infected Wounds

The challenge of wound healing, particularly in patients with comorbidities such as diabetes, is intensified by wound infection and the accelerating problem of bacterial resistance to current remedies such as antibiotics and silver. One promising approach harnesses the bioactive and antibacterial compound C-phycocyanin from the microalga Spirulina maxima. However, the current processes of extracting this compound and developing coatings are unsustainable and difficult to achieve. To circumvent these obstacles, a novel, sustainable argon atmospheric plasma jet (Ar-APJ) technology that transforms S. maxima biomass into bioactive coatings is presented. This Ar-APJ can selectively disrupt the cell walls of S. maxima, converting them into bioactive ultrathin coatings, which are found to be durable under aqueous conditions. The findings demonstrate that Ar-APJ-transformed bioactive coatings show better antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. Moreover, these coatings exhibit compatibility with macrophages, induce an anti-inflammatory response by reducing interleukin 6 production, and promote cell migration in keratinocytes. This study offers an innovative, single-step, sustainable technology for transforming microalgae into bioactive coatings. The approach reported here has immense potential for the generation of bioactive coatings for combating wound infections and may offer a significant advance in wound care research and application.

Dual mode antibacterial surfaces based on Prussian blue and silver nanoparticles

Prussian Blue (PB) is an inexpensive, biocompatible, photothermally active material. In this paper, self-assembled monolayers of PB nanoparticles were grafted on a glass surface, protected with a thin layer of silica and decorated with spherical silver nanoparticles. This combination of a photothermally active nanomaterial, PB, and an intrinsically antibacterial one, silver, leads to a versatile coating that can be used for medical devices and implants. The intrinsic antibacterial action of nanosilver, always active over time, can be enhanced on demand by switching on the photothermal effect of PB using near infrared (NIR) radiation, which has a good penetration depth through tissues and low side effects. Glass surfaces functionalized by this layer-by-layer approach have been characterized for their morphology and composition, and their intrinsic and photothermal antibacterial effect was studied against Gram+ and Gram- planktonic bacteria.

Substrate-independent and widely applicable deposition of antibacterial coatings

Antibacterial coatings are regarded as a necessary tool to prevent implant-related infections. Substrate-independent and widely applicable coating techniques are gaining significant interest to synthesize different types of antibacterial films, which can be relevant from a fundamental and application-oriented perspective. Plasma polymer- and polydopamine-based antibacterial coatings represent the most widely studied and versatile approaches among these coating techniques. Both single- and dual-functional antibacterial coatings can be fabricated with these approaches and a variety of dual-functional antibacterial coating strategies can still be explored in future work. These coatings can potentially be used for a wide range of different implants (material, shape, and size). However, for most implants, significantly more fundamental knowledge needs to be gained before these coatings can find real-life use.

Cytotoxicity of nanomixture: Combined action of silver and plastic nanoparticles on immortalized human lymphocytes

BACKGROUND

Silver nanoparticles (AgNP) are one of the most commercialized types of nanomaterials, with a wide range of applications owing to their antimicrobial activity. They are particularly important in hospitals and other healthcare settings, where they are used to maintain sterility of surfaces, textiles, catheters, medical implants, and more. However, AgNP can not only harm bacteria, but also damage mammalian cells and tissue. While the potential toxicity of AgNP is an understood risk, there is a lack of data on their toxicity in combination with polymeric materials, especially plastic nanoparticles such as polystyrene nanoparticles (PSNP) that can be released from surfaces of polystyrene devices during their medical use.

AIM

This study aimed to investigate combined effect of AgNP and nanoplastics on human immune response.

METHODS

Cells were treated with a range of PSNP and AgNP concentrations, either applied alone or in combination. Cytotoxicity, induction of apoptosis, generation of oxidative stress, uptake efficiency, intracellular localization and nanomechanical cell properties were selected as exposure biomarkers.

RESULTS

Collected experimental data showed that nanomixture induced oxidative stress, apoptosis and mortality of Jurkat cells stronger than its individual components. Cell treatment with AgNP/PSNP mixture also significantly changed cell mechanical properties, evidenced by reduction of cells' Young Modulus.

CONCLUSION

AgNP and PSNP showed additive toxic effects on immortalized human lymphocytes, evidenced by increase in cellular oxidative stress, induction of apoptosis, and reduction of cell stiffness. These results have important implications for using AgNP and PSNP in medical contexts, particularly for long-term medical implants.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Novel Carboxylic Acid-Capped Silver Nanoparticles as Antimicrobial and Colorimetric Sensing Agents

The present work reports the synthesis, characterization, and antimicrobial activities of adipic acid-capped silver nanoparticles (AgNPs@AA) and their utilization for selective detection of Hg²⁺ ions in an aqueous solution. The AgNPs were synthesized by the reduction of Ag⁺ ions with NaBH₄ followed by capping with adipic acid. Characterization of as-synthesized AgNPs@AA was carried out by different techniques, including UV–Visible spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Dynamic Light Scattering (DLS), and zeta potential (ZP). In the UV–Vis absorption spectrum, the characteristic absorption band for AgNPs was observed at 404 nm. The hydrodynamic size of as-synthesized AgNPs was found to be 30 ± 5.0 nm. ZP values (−35.5 ± 2.4 mV) showed that NPs possessed a negative charge due to carboxylate ions and were electrostatically stabilized. The AgNPs show potential antimicrobial activity against clinically isolated pathogens. These AgNPs were found to be selectively interacting with Hg²⁺ in an aqueous solution at various concentrations. A calibration curve was constructed by plotting concentration as abscissa and absorbance ratio (A_Control − A_Hg/A_Control) as ordinate. The linear range and limit of detection (LOD) of Hg²⁺ were 0.6–1.6 μM and 0.12 μM, respectively. A rapid response time of 4 min was found for the detection of Hg²⁺ by the nano-probe. The effect of pH and temperature on the detection of Hg²⁺ was also investigated. The nano-probe was successfully applied for the detection of Hg²⁺ from tap and river water

Polycationic Silver Nanoclusters Comprising Nanoreservoirs of Ag+ Ions with High Antimicrobial and Antibiofilm Activity

Silver-based nano-antibiotics are rapidly developing as promising alternatives to conventional antibiotics. Ideally, to remain potent against a wide range of drug-resistant and anaerobic bacteria, silver-based nano-antibiotics should easily penetrate through the bacterial cell walls and actively release silver ions. In this study, highly monodispersed, ultrasmall (<3 nm), polycationic silver nanoclusters (pAgNCs) are designed and synthesized for the elimination of a range of common Gram-negative and Gram-positive pathogens and their corresponding established and matured biofilms, including those composed of multiple species. The pAgNCs also show greatly enhanced antibacterial efficacy against anaerobic bacteria such as Fusobacterium nucleatum and Streptococcus sanguinis. These results demonstrate that the cationic nature facilitates better penetration to the bacterial cell membrane while the presence of a high percentage (>50%) of silver ions (i.e., Ag⁺ nanoreservoirs) on the cluster surface maintains their efficiency in both aerobic and anaerobic conditions. Significantly, the pAgNCs showed a strong capacity to significantly delay the development of bacterial resistance when compared to similar-sized negatively charged silver nanoparticles or conventional antibiotics. This study demonstrates a novel design strategy that can lay the foundation for the development of future highly potent nano-antibiotics effective against a broad spectrum of pathogens and biofilms needed in many everyday life applications and industries.

A novel self-healing triple physical cross-linked hydrogel for antibacterial dressing

The poor mechanical properties of wound dressings have always been a challenge in their application as wound protective barriers. In particular, when the hydrogel dressing absorbs the tissue fluid, the mechanical properties of the hydrogel will decrease greatly due to the swelling effect. In this study, an original antibacterial hydrogel dressing was prepared by a one-step process with acrylic acid, 1-vinyl-3-butylimidazolium, COOH-modified gum arabic, and aluminium chloride. The mechanical properties of this hydrogel were improved after water absorption due to hydrophobic interactions, so the hydrogel dressing could maintain good mechanical properties after absorption of the tissue fluid. Furthermore, 1-vinyl-3-butylimidazolium as an ionic liquid was introduced into the polymer backbone of hydrogels via covalent bonds and could promote the self-healing of hydrogels by facilitating the migration of aluminum ions with charge. The obtained hydrogels showed good self-healing properties, with a strain self-healing rate of 98.2% and a stress self-healing rate of 92.3%. In addition, this hydrogel exhibited excellent antibacterial activity against E. coli, S. aureus, and C. albicans. The results of the study on rat wound closure indicated that this hydrogel effectively accelerated the healing of a full-thickness skin defect. Therefore, this novel hydrogel has a broad application prospect in the field of wound dressing.

Eradication of Mature Bacterial Biofilms with Concurrent Improvement in Chronic Wound Healing Using Silver Nanoparticle Hydrogel Treatment

Biofilm-associated infections are a major cause of impaired wound healing. Despite the broad spectrum of anti-bacterial benefits provided by silver nanoparticles (AgNPs), these materials still cause controversy due to cytotoxicity and a lack of efficacy against mature biofilms. Herein, highly potent ultrasmall AgNPs were combined with a biocompatible hydrogel with integrated synergistic functionalities to facilitate elimination of clinically relevant mature biofilms in-vivo combined with improved wound healing capacity. The delivery platform showed a superior release mechanism, reflected by high biocompatibility, hemocompatibility, and extended antibacterial efficacy. In vivo studies using the S. aureus wound biofilm model showed that the AgNP hydrogel (200 µg/g) was highly effective in eliminating biofilm infection and promoting wound repair compared to the controls, including silver sulfadiazine (Ag SD). Treatment of infected wounds with the AgNP hydrogel resulted in faster wound closure (46% closure compared to 20% for Ag SD) and accelerated wound re-epithelization (60% for AgNP), as well as improved early collagen deposition. The AgNP hydrogel did not show any toxicity to tissue and/or organs. These findings suggest that the developed AgNP hydrogel has the potential to be a safe wound treatment capable of eliminating infection and providing a safe yet effective strategy for the treatment of infected wounds.

Multifunctional ultrasmall AgNP hydrogel accelerates healing of S. aureus infected wounds

The increasing emergence of antibiotic resistance coupled with the limited effectiveness of current treatments highlights the need for the development of new treatment modalities. Silver nanoparticles (AgNPs) are a promising alternative with broad-spectrum antibacterial activity. However, the clinical translation of AgNPs have been hampered primarily due to the delivery of unsafe levels of silver ions (Ag⁺) resulting in cellular toxicity and their susceptibility to aggregation resulting in loss of efficacy. Here, we describe a safe and effective, thermo-responsive AgNP hydrogel that provides antibacterial effects in conjunction with wound promoting properties. Using a murine model of wound infection, we demonstrate that the applied AgNP hydrogel to the wound (12 µg silver) not only provides superior bactericidal activity but also reduces inflammation leading to accelerated wound closure when compared to industry-standard silver sulfadiazine (302 µg silver). The AgNP hydrogel-treatment significantly accelerated wound closure at day 4 post-infection (56 closure) compared to both blank hydrogel or Ag SD (74% and 91% closure respectively) with a concurrent increase in PCNA-positive proliferating cells corresponding with a significant 32% improvement in wound re-epithelization compared to the blank hydrogel. Treatment of infected wounds with AgNP hydrogel also decreased neutrophil infiltration, increased anti-inflammatory Ym-1 positive M2 macrophages, and reduced the number of caspase-1 positive apoptotic cells. Therefore, this novel multifunctional AgNP thermo-responsive hydrogel is potentially a safe and effective treatment at much lower concentration for the treatment of wound infections. STATEMENT OF SIGNIFICANCE: In this study, we describe the development of a multifunctional thermo-responsive hydrogel of ultrasmall silver nanoparticles (AgNPs) for controlled and optimized delivery of silver to infected wounds. The in vivo biological effects of the developed hydrogel showed significant S. aureus elimination from infected mouse wounds compared to a commercial antibacterial formulation. The developed AgNP hydrogel optimally regulates inflammatory responses to promote wound healing as indicated by increased cell proliferation and wound re-epithelization. Additionally, AgNP hydrogel shows significant potential in regulating neutrophil infiltration while increasing levels of anti-inflammatory M2 macrophages and reduces the number of apoptotic cells. Therefore, the multifunctional properties of the developed AgNP thermo-responsive hydrogel offers great clinical potential to control bacterial infections and promote wound healing.

Improved hemocompatibility and reduced bacterial adhesion on superhydrophobic titania nanoflower surfaces

Thrombosis formation and bacterial infection are key challenges for blood-contacting medical devices. When blood components encounter a device's surface, proteins are adsorbed, followed by the adhesion and activation of platelets as well as an immune response. This culminates in clot formation via the trapping of red blood cells in a fibrin matrix, which can block the device's function and cause severe complications for the patient. In addition, bacteria may adhere to a device's surface. This can lead to the formation of a biofilm, a protective layer for bacteria that significantly increases resistance to antibiotics. Despite years of research, no long-term solutions have been discovered to combat these issues. To impede thrombosis, patients often take antiplatelet drugs for the life of their device, which can cause excess bleeding and other complications. Patients can take antibiotics to fight bacterial infection, but these are often ineffective if biofilms are formed. Superhydrophobic surfaces show promise in reducing both thrombosis and bacterial infection on devices by impeding contact between biological components and the biomaterial. In this study, superhydrophobic titania nanoflower surfaces were successfully fabricated on a titanium alloy Ti-6Al-4V substrate with hydrothermal synthesis and vapor-phase silanization. The surface topography, surface wettability, surface chemistry, and surface crystallography of the surfaces was subsequently characterized. Surface hemocompatibility was investigated through lactate dehydrogenase (LDH) cytotoxicity analysis, blood-plasma protein adsorption, platelet and leukocyte adhesion and activation, and whole blood clotting analysis. Surface bacterial infection was characterized through Gram-positive and Gram-negative bacterial adhesion and biofilm morphology. The results indicated a reduction of protein adsorption, platelet and leukocyte adhesion and activation, bacterial adhesion, and biofilm formation as well as improved contact angle stability compared to control surfaces.

Metal Accumulation Using a Bacterium (K-142) Identified from Environmental Microorganisms by the Screening of Au Nanoparticles Synthesis

The use of technology that uses organisms to synthesize metal nanoparticles is necessary to maintain a sustainable society. In this study, we investigated and screened the microorganisms isolated from environmental water by quantifying the reproducibility of synthetic Au nanoparticles and the ability of large amount synthesis. The microorganism (K-142) of the Bacillus genus showed the best activity in the investigation. K-142 can also synthesize Ag, CdS and PbS nanoparticles, and the deposition efficiency of Ag, Al, Cd, Cu, and Pb was about 64.8–99.2%. According to the observation results under the microscope after fluorescent staining, K-142 could survive after being treated with 0.5 mM metal solution for 24 h. Therefore, it is expected that K-142, which is easy to cultivate, would also have a high ability to reduce and deposit metal substances. K-142 can be applied to the concentration and recovery of heavy metals in environmental water, thereby opening up channels for biological water purification.

Ultrasmall AgNP-Impregnated Biocompatible Hydrogel with Highly Effective Biofilm Elimination Properties

Ultrasmall silver nanoparticles (AgNPs; size < 3 nm) have attracted a great deal of interest as an alternative to commercially available antibiotics due to their ability to eliminate a wide range of microbial pathogens. However, most of these ultrasmall AgNPs are highly reactive and unstable, as well as susceptible to fast oxidation. Therefore, both the stability and toxicity remain major shortcomings for their clinical application and uptake. To circumvent these problems, we present a novel strategy to impregnate ultrasmall AgNPs into a biocompatible thermosensitive hydrogel that enables controlled release of silver alongside long-term storage stability and highly potent antibacterial activity. The advantage of this strategy lies in the combination of a homogenous dispersion of AgNPs in a hydrogel network, which serves as a sustained-release reservoir, and the unique feature of ultrasmall AgNP size, which provides an improved biofilm eradication capacity. The superior biofilm dispersion properties of the AgNP hydrogel is demonstrated in both single-species and multispecies biofilms, eradicating ∼80% of established biofilms compared to untreated controls. Notably, the effective antibacterial concentration of the formulation shows minimal toxicity to human fibroblasts and keratinocytes. These findings present a promising novel strategy for the development of AgNP hydrogels as an efficient antibacterial platform to combat resistant bacterial biofilms associated with wound infections.

Effect of Silver Antibacterial Agents on Bond Strength of Fiber Posts to Root Dentin

This study was conducted to evaluate whether antibacterial pretreatment irrigation with silver nanoparticles (SNPs) and silver diamine fluoride (SDF) has any effect on bond strength of fiber posts cemented with three types of resin cements in root canal space. Fifty-four endodontically treated maxillary central incisor roots were prepared for fiber post (FRC Postec Plus NO.3, Ivoclar Vivadent) cementation and divided into nine groups in terms of three cement types and two pretreatments with silver antibacterial agents. The cements were as follows: an etch-and-rinse cement (ER, Excite DSC/Variolink N), a self-etch cement (SE, ED Primer/Panavia F2.0), and a self-adhesive cement (SA, Panavia SA Luting Plus). For each cement, the control group was with no treatment and two experimental groups were with SNPs and SDF treatments that were used after acid-etching for ER cement and after EDTA treatment for SE and SA cements. After fiber post cementation, each bonded root was horizontally sectioned into 1-mm thickness microslices to create two slices for each root region (apical, middle and coronal) and underwent push-out bond strength (PBS) test. Data in MPa were analyzed with two-way ANOVA and Tukey test (p=0.05). The interaction of the pretreatment type and cement type was significant (p<0.001). SNPs and SDF significantly increased PBS with ER cement (p≤0.04). This positive effect was also marginally significant for SDF with SE cement (p=0.049). For SA cement, SNPs showed a significant positive effect, but SDF had a significant adverse effect on PBS (p<0.001). The effect of pretreatment with silver antibacterial agents prior to adhesive cementation of fiber posts depends on the resin cement used. Contrary to SNPs with beneficial or no significant effect on bonding for all cements, SDF exhibited a deleterious effect with self-adhesive cement.

Surface modification strategies for hemodialysis catheters to prevent catheter-related infections: A review

Insertion of a central venous catheter is one of the most common invasive procedures applied in hemodialysis therapy for end-stage renal disease. The most important complication of a central venous catheter is catheter-related infections that increase hospitalization and duration of intensive care unit stay, cost of treatment, mortality, and morbidity rates. Pathogenic microorganisms, such as, bacteria and fungi, enter the body from the catheter insertion site and the surface of the catheter can become colonized. The exopolysaccharide-based biofilms from bacterial colonies on the surface are the main challenge in the treatment of infections. Catheter lock solutions and systemic antibiotic treatment, which are commonly used in the treatment of hemodialysis catheter-related infections, are insufficient to prevent and terminate the infections and eventually the catheter needs to be replaced. The inadequacy of these approaches in termination and prevention of infection revealed the necessity of coating of hemodialysis catheters with bactericidal and/or antiadhesive agents. Silver compounds and nanoparticles, anticoagulants (e.g., heparin), antibiotics (e.g., gentamicin and chlorhexidine) are some of the agents used for this purpose. The effectiveness of few commercial hemodialysis catheters that were coated with antibacterial agents has been tested in clinical trials against catheter-related infections of pathogenic bacteria, such as Staphylococcus aureus and Staphylococcus epidermidis with promising results. Novel biomedical materials and engineering techniques, such as, surface micro/nano patterning and the conjugation of antimicrobial peptides, enzymes, metallic cations, and hydrophilic polymers (e.g., poly [ethylene glycol]) on the surface, has been suggested recently.

The Impact of Engineered Silver Nanomaterials on the Immune System

Over the last decades there has been a tremendous volume of research efforts focused on engineering silver-based (nano)materials. The interest in silver has been mostly driven by the element capacity to kill pathogenic bacteria. In this context, the main area of application has been medical devices that are at significant risk of becoming colonized by bacteria and subsequently infected. However, silver nanomaterials have been incorporated in a number of other commercial products which may or may not benefit from antibacterial protection. The rapid expansion of such products raises important questions about a possible adverse influence on human health. This review focuses on examining currently available literature and summarizing the current state of knowledge of the impact of silver (nano)materials on the immune system. The review also looks at various surface modification strategies used to generate silver-based nanomaterials and the immunomodulatory potential of these materials. It also highlights the immune response triggered by various silver-coated implantable devices and provides guidance and perspective towards engineering silver nanomaterials for modulating immunological consequences.

Field Deployable Method for Gold Detection Using Gold Pre-Concentration on Functionalized Surfaces

Keywords: surface chemistry, plasma polymerization, salinization, gold sensing.

Multifunctional Graphene-Oxide-Reinforced Dissolvable Polymeric Microneedles for Transdermal Drug Delivery

Dissolvable polymeric microneedles (DPMNs) are promising transdermal drug delivery systems with minimal invasiveness and improved patient compliance. Incorporation of a small amount of graphene oxide (GO) in the biocompatible polymers for microneedle fabrication results in important new DPMN properties, that is, dramatically enhanced mechanic strength (10-17 times at 500 mg/mL GO), improved moisture resistance, self-sterilization, antibacterial and anti-inflammatory properties (demonstrated in vitro), and near-infrared light-activated controlled drug release (demonstrated in vitro and in vivo), which were exploited for the transdermal delivery of the chemotherapeutic, HA15, to melanoma-bearing mouse models. These new properties improve their efficacy of transdermal drug delivery and ease of use, enhance their capability of controlled drug release, enlarge the scope of the polymers that can be used for DPMN fabrication, prevent microbial contamination during storage and transportation, and reduce infection risk in clinical applications.

Nanoengineered Antibacterial Coatings and Materials: A Perspective

This feature article begins by outlining the problem of infection and its implication on healthcare. The initial introductory section is followed by a description of the four distinct classes of antibacterial coatings and materials, i.e., bacteria repealing, contact killing, releasing and responsive, that were developed over the years by our team and others. Specific examples of each individual class of antibacterial materials and a discussion on the pros and cons of each strategy are provided. The article contains a dedicated section focused on silver nanoparticle based coatings and materials, which have attracted tremendous interest from the scientific and medical communities. The article concludes with the author’s view regarding the future of the field.

Porous Titanium Surfaces to Control Bacteria Growth: Mechanical Properties and Sulfonated Polyetheretherketone Coatings as Antibiofouling Approaches

Here, titanium porous substrates were fabricated by a space holder technique. The relationship between microstructural characteristics (pore equivalent diameter, mean free-path between pores, roughness and contact surface), mechanical properties (Young’s modulus, yield strength and dynamic micro-hardness) and bacterial behavior are discussed. The bacterial strains evaluated are often found on dental implants: Methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa. The colony-forming units increased with the size of the spacer for both types of studied strains. An antibiofouling synthetic coating based on a sulfonated polyetheretherketone polymer revealed an effective chemical surface modification for inhibiting MRSA adhesion and growth. These findings collectively suggest that porous titanium implants designed with a pore size of 100–200 µm can be considered most suitable, assuring the best biomechanical and bifunctional anti-bacterial properties.

Biomaterial Surface Hydrophobicity-Mediated Serum Protein Adsorption and Immune Responses

The nature of the protein corona forming on biomaterial surfaces can affect the performance of implanted devices. This study investigated the role of surface chemistry and wettability on human serum-derived protein corona formation on biomaterial surfaces and the subsequent effects on the cellular innate immune response. Plasma polymerization, a substrate-independent technique, was employed to create nanothin coatings with four specific chemical functionalities and a spectrum of surface charges and wettability. The amount and type of protein adsorbed was strongly influenced by surface chemistry and wettability but did not show any dependence on surface charge. An enhanced adsorption of the dysopsonin albumin was observed on hydrophilic carboxyl surfaces while high opsonin IgG2 adsorption was seen on hydrophobic hydrocarbon surfaces. This in turn led to a distinct immune response from macrophages; hydrophilic surfaces drove greater expression of anti-inflammatory cytokines by macrophages, whilst surface hydrophobicity caused increased production of proinflammatory signaling molecules. These findings map out a unique relationship between surface chemistry, hydrophobicity, protein corona formation, and subsequent cellular innate immune responses; the potential outcomes of these studies may be employed to tailor biomaterial surface modifications, to modulate serum protein adsorption and to achieve the desirable innate immune response to implanted biomaterials and devices.

In Vitro Antimicrobial Efficacy of Silver Lens Cases Used With a Multipurpose Disinfecting Solution

Purpose

We evaluate the in vitro antibacterial activity of silver-copolymerized barrel cases compared to nonsilver barrel cases in combination with a multipurpose disinfecting solution (MPDS).

Methods

The ability of silver and nonsilver cases to reduce the number of adherent Gram-positive and Gram-negative bacteria was assessed. Additionally, the efficacy of silver cases along with MPDS was investigated in the presence of organic soil and contact lenses. Contact lens cases were challenged with 10⁶ colony-forming units (CFU)/mL of five bacterial species. Adherent bacteria were dislodged from lens cases and surviving organisms enumerated.

Results

Significantly lower numbers of microbes were recovered from silver cases compared to controls, for all bacterial strains (P < 0.005). The combination of silver case along with MPDS showed added efficacy against Gram-positive and -negative bacteria with a maximum reduction of 3.00 ± 0.5 Log₁₀ CFU/mL, compared to the efficacy of silver cases alone (1.97 ± 0.4 Log₁₀ CFU/mL). The addition of organic soil and a contact lens resulted in a significant (P < 0.005) decrease (a maximum of 1.68 ± 0.2 log₁₀ CFU/mL) in disinfection efficacy when MPDS and either silver or control cases were used.

Conclusions

Silver-copolymerized barrel cases work on conjunction with a hypochlorite producing MPDS in the presence of contact lenses and organic soil to reduce microbial contamination of lens cases.

Transitional Relevance

Silver-copolymerized barrel contact lens cases show promising in vitro antibacterial activity against bacterial types commonly implicated in contact lens-related corneal infections. This intervention may limit storage case contamination during use and reduce the frequency of contact lens-related microbial disease.

The interplay between size and valence state on the antibacterial activity of sub-10 nm silver nanoparticles

Silver nanoparticles (AgNPs) have attracted enormous interest because of their excellent antibacterial properties, low cytotoxicity and limited evidence for resistance. As a general trend, smaller nanoparticles are considered to have stronger antibacterial activity. In this work we investigate whether this trend is valid for the sub-10 nm region by designing and synthesising three types of sub-10 nm AgNPs (∼1.87, ∼2.93 and ∼6.53 nm) to reveal the influence of size, valence state and structure on the antibacterial potency of AgNPs. We found that NPs with a size of ∼2.93 nm having a high concentration of silver in the first valence state presented the highest bacterial killing potency as well as low cytotoxicity to mammalian cells. The new insights presented in this study open future avenues for the engineering of highly potent silver nanoantibiotics that can be incorporated into future advanced medical devices and therapies capable of protecting patients from infections.

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Printed electronics on flexible substrates has attracted tremendous research interest research thanks its low cost, large area production capability and environmentally friendly advantages. Optimal characteristics of silver nanoparticles (Ag NPs) based inks are crucial for ink rheology, printing, post-print treatment, and performance of the printed electronics devices. In this review, the methods and mechanisms for obtaining Ag NPs based inks that are highly conductive under moderate sintering conditions are summarized. These characteristics are particularly important when printed on temperature sensitive substrates that cannot withstand sintering of high temperature. Strategies to tailor the protective agents capping on the surface of Ag NPs, in order to optimize the sizes and shapes of Ag NPs as well as to modify the substrate surface, are presented. Different (emerging) sintering technologies are also discussed, including photonic sintering, electrical sintering, plasma sintering, microwave sintering, etc. Finally, applications of the Ag NPs based ink in transparent conductive film (TCF), thin film transistor (TFT), biosensor, radio frequency identification (RFID) antenna, stretchable electronics and their perspectives on flexible and printed electronics are presented.

Biomass-Templated Fabrication of Metallic Materials for Photocatalytic and Bactericidal Applications

In this paper, we report a simple, feasible and low-cost method to fabricate self-standing metallic materials using cellulose-based biomass as sacrificial templates. This process involves the impregnation of metallic precursors to the cellulose fibers of biomass templates and the transformation of the precursors to corresponding metals or metal oxides (as well as the removal of the cellulose framework) at an elevated temperature. The structures of the metallic materials as fabricated take the form of architectures of biomass templates (e.g., chromatography paper, medical absorbent cotton, catkins of reed, seed balls of oriental plane, and petals of peach blossom), and the various kinds of metals and metal oxides fabricated with these templates include silver, gold, anatase, cupric oxide, zinc oxide, etc. We have demonstrated photocatalytic and bactericidal applications of such metallic materials, and they should find more applications in electronics, catalysis, energy storage, biomedicine and so on.

Novel coating containing molybdenum oxide nanoparticles to reduce Staphylococcus aureus contamination on inanimate surfaces

We previously synthetized molybdenum oxide (MoO₃) nanoparticles (NP) and showed their antibacterial activity against a representative collection of the most relevant bacterial species responsible for hospital-acquired infections, including Staphylococcus aureus. The aim of the present study was to prepare and characterize a novel coating with these MoO₃ NP, confirm its mechanical stability, and investigate its biocidal effect to reduce S. aureus contamination on inanimate surfaces. In addition, the novel MoO₃ NP coating was compared to a silver (Ag) NP coating synthetized by the same procedure. The MoO₃ and Ag NP coatings were characterized in terms of their chemical structure by FT-IR, surface morphology by scanning electron microscopy, and mechanical properties by tensile and adhesion tests. The antimicrobial activity of the coatings was tested by following the loss of viability of S. aureus after 6h, 24h, 48h, and 72h exposure. MoO₃ and Ag coatings exhibited surfaces of comparable morphologies and both presented elastomeric properties (tensile strength of ~420 kPa, Young’s modulus of ~48 kPa, and maximum elongation of ~12%), and excellent (classification of 5B) adhesion to glass, steel and polystyrene surfaces. The two coatings exhibited a good antibacterial activity (R) against S. aureus over time (R_MoO3 = 0.2–0.81; R_Ag = 0.61–2.37), although the effect of the Ag NP coating was more pronounced, especially at 72h (R_MoO3 = 0.81 vs R_Ag = 2.37). Noteworthy, contrary to the Ag NP coating, the MoO₃ NP coating was colourless and transparent, avoiding undesired unaesthetic effects. The synthetized coating with NP of MoO₃, which has low toxicity to humans, capability of biodegradation, and rapid excretion, can be applied onto most standard materials and therefore is a promising tool to reduce S. aureus contamination on usual inanimate surfaces found in healthcare and community environments.

The antibacterial effect of non-thermal atmospheric pressure plasma treatment of titanium surfaces according to the bacterial wall structure

Titanium is commonly used as a biomaterial for dental implants. In this study, we investigated the antibacterial properties of titanium samples following treatment with a non-thermal atmospheric pressure plasma jet (NTAPPJ) on bacteria with two different cell wall structures, including gram-positive and gram-negative bacteria. The hydrophilicity and surface energy of titanium surfaces were significantly increased after NTAPPJ treatment without altering topographical features. Changes in the chemical composition and reductive potential were observed on the NTAPPJ-treated titanium surfaces. The adhesion and biofilm formation rate of bacteria were significantly reduced on the NTAPPJ-treated titanium surfaces compared with the untreated samples, which was confirmed by fluorescent imaging. Regarding the comparison between gram-positive and gram-negative bacteria, both adhesion and the biofilm formation rate were significantly lower for gram-negative bacteria than gram-positive bacteria on samples treated for longer durations with the NTAPPJ. Transmission electron microscopy imaging showed a comparably more disruptive membrane structure of gram-negative bacteria than gram-positive bacteria on the NTAPPJ-treated surfaces. Our results indicated that the NTAPPJ treatment could be useful for preventing bacterial adhesion and biofilm formation on titanium dental implant surfaces, while the reductive potential on surfaces treated by the NTAPPJ could cause oxidation of bacteria, which could be more sensitive to gram-negative bacteria due to differences in the cell wall structure.

Potential ecotoxicological effects of antimicrobial surface coatings: a literature survey backed up by analysis of market reports

This review was initiated by the COST action CA15114 AMICI "Anti-Microbial Coating Innovations to prevent infectious diseases," where one important aspect is to analyze ecotoxicological impacts of antimicrobial coatings (AMCs) to ensure their sustainable use. Scopus database was used to collect scientific literature on the types and uses of AMCs, while market reports were used to collect data on production volumes. Special attention was paid on data obtained for the release of the most prevalent ingredients of AMCs into the aqueous phase that was used as the proxy for their possible ecotoxicological effects. Based on the critical analysis of 2,720 papers, it can be concluded that silver-based AMCs are by far the most studied and used coatings followed by those based on titanium, copper, zinc, chitosan and quaternary ammonium compounds. The literature analysis pointed to biomedicine, followed by marine industry, construction industry (paints), food industry and textiles as the main fields of application of AMCs. The published data on ecotoxicological effects of AMCs was scarce, and also only a small number of the papers provided information on release of antimicrobial ingredients from AMCs. The available release data allowed to conclude that silver, copper and zinc are often released in substantial amounts (up to 100%) from the coatings to the aqueous environment. Chitosan and titanium were mostly not used as active released ingredients in AMCs, but rather as carriers for other release-based antimicrobial ingredients (e.g., conventional antibiotics). While minimizing the prevalence of healthcare-associated infections appeared to be the most prosperous field of AMCs application, the release of environmentally hazardous ingredients of AMCs into hospital wastewaters and thus, also the environmental risks associated with AMCs, comprise currently only a fraction of the release and risks of traditional disinfectants. However, being proactive, while the use of antimicrobial/antifouling coatings could currently pose ecotoxicological effects mainly in marine applications, the broad use of AMCs in other applications like medicine, food packaging and textiles should be postponed until reaching evidences on the (i) profound efficiency of these materials in controlling the spread of pathogenic microbes and (ii) safety of AMCs for the human and ecosystems.

Perspective on Plasma Polymers for Applied Biomaterials Nanoengineering and the Recent Rise of Oxazolines

Plasma polymers are unconventional organic thin films which only partially share the properties traditionally attributed to polymeric materials. For instance, they do not consist of repeating monomer units but rather present a highly crosslinked structure resembling the chemistry of the precursor used for deposition. Due to the complex nature of the deposition process, plasma polymers have historically been produced with little control over the chemistry of the plasma phase which is still poorly understood. Yet, plasma polymer research is thriving, in par with the commercialisation of innumerable products using this technology, in fields ranging from biomedical to green energy industries. Here, we briefly summarise the principles at the basis of plasma deposition and highlight recent progress made in understanding the unique chemistry and reactivity of these films. We then demonstrate how carefully designed plasma polymer films can serve the purpose of fundamental research and biomedical applications. We finish the review with a focus on a relatively new class of plasma polymers which are derived from oxazoline-based precursors. This type of coating has attracted significant attention recently due to its unique properties.

Self-sterilizing antibacterial silver-loaded microneedles

Here we report the development of slef-sterilizing dissolving microneedles, a promising vehicle for vaccine and drug delivery.

Remodeling of inherent antimicrobial nanofiber dressings with melamine-modified fibroin into neoskin

A melamine-modified fibroin was synthesized and fabricated into electrospun nanofiber films with broad-spectrum antimicrobial activity, sustained water retention, and fast reepithelialization and revascularization.

Antimicrobial strategies for urinary catheters

Over 75% of hospital-acquired or nosocomial urinary tract infections are initiated by urinary catheters, which are used during the treatment of 16% of hospitalized patients. Taking the United States as an example, the costs of catheter-associated urinary tract infections (CAUTI) are in excess of $451 million dollars/year. The biofilm formation by pathogenic microbes that protects pathogens from host immune defense and antimicrobial agents is the leading cause for CAUTI. Thus, tremendous efforts have been devoted to antimicrobial coating for urinary catheters in the past few decades, and it has been demonstrated to be one of the most direct and efficient strategies to reduce infections. In this article, we briefly summarize the current methods for preparation of antimicrobial coatings based on different stages in the biofilm formation, highlight recent progress in the urinary catheter coating material design and selection, discuss approaches to improving their long-term antimicrobial efficacy, biocompatibility, multidrug resistance and recurrent infections, and finally outline future requirements and prospects in antimicrobial coating material design. The scope of the works surveyed is confined to antimicrobial urinary catheters. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 445-467, 2019.

Direct covalent attachment of silver nanoparticles on radical-rich plasma polymer films for antibacterial applications

Prevention and treatment of biomaterial-associated infections (BAI) are imperative requirements for the effective and long-lasting function of orthopedic implants. Surface-functionalization of these materials with antibacterial agents, such as antibiotics, nanoparticles and peptides, is a promising approach to combat BAI. The well-known silver nanoparticles (AgNPs) in particular, although benefiting from strong and broad-range antibacterial efficiency, have been frequently associated with mammalian cell toxicity when physically adsorbed on biomaterials. The majority of irreversible immobilization techniques employed to fabricate AgNP-functionalized surfaces are based on wet-chemistry methods. However, these methods are typically substrate-dependent, complex, and time-consuming. Here we present a simple and dry strategy for the development of polymeric coatings used as platforms for the direct, linker-free covalent attachment of AgNPs onto solid surfaces using ion-assisted plasma polymerization. The resulting coating not only exhibits long-term antibiofilm efficiency against adherent Staphylococcus aureus (S. aureus), but also enhances osteoblast adhesion and proliferation. High resolution X-ray photoelectron spectroscopy (XPS), before and after sodium dodecyl sulfate (SDS) washing, confirms covalent bonding. The development of such silver-functionalized surfaces through a simple, plasma-based process holds great promise for the fabrication of implantable devices with improved tissue-implant integration and reduced biomaterial associated infections.

Fabrication and in vitro behavior of dual-function chitosan/silver nanocomposites for potential wound dressing applications

We report the synthesis and in vitro evaluation of dual-function chitosan-silver nanoparticles (CTS-AgNPs) films with potential applications as wound dressings. We attempted to formulate nanocomposite films with appropriate AgNPs concentrations to simultaneously display antibacterial activity and suitability for cell culture. Nanocomposites were obtained by CTS-mediated in situ chemical reduction of AgNO₃. Circular-shape AgNPs (sizes ca. 7-50 nm) well distributed within the CTS matrices were obtained in concentrations from 0.018 to 0.573 wt%. Efficacy (bacteriostatic and bactericidal properties) of CTS-AgNPs films to decrease planktonic and biofilm bacterial growth was AgNPs concentration- and bacteria strain-dependent. Films showed significant antibacterial activity against Gram-negative E. coli and P. aeruginosa and Gram-positive S. aureus. Antibacterial activity against S. epidermidis was moderated. Films suitability for cell culture was characterized using primary human fibroblasts (HF). HF displayed cell viability higher than 90% and the characteristic fusiform morphology of adhered fibroblast upon culture on films with AgNPs concentration ≤ 0.036 wt%. HF cultured on these films also showed positive expression of tropoelastin, procollagen type I and Ki-67, characteristic proteins of extracellular matrix and proliferative cells, respectively. In vitro assays demonstrated that cytocompatibility/antibacterial properties decreased/increased as silver concentration increased, suggesting that CTS-AgNPS nanocomposite films with ≈0.04-0.20 wt% might be considered as potential temporary dual-function wound dressings.

Bactericidal efficacy of molybdenum oxide nanoparticles against antimicrobial-resistant pathogens

Multidrug-resistant bacteria pose a major threat to effective antibiotics and alternatives to fight multidrug-resistant pathogens are needed. We synthetized molybdenum oxide (MoO3) nanoparticles (NP) and determined their antibacterial activity against 39 isolates: (i) eight Staphylococcus aureus, including representatives of methicillin-resistant S. aureus epidemic clones; (ii) six enterococci, including vancomycin-resistant isolates; and (iii) 25 Gram-negative isolates (Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Acinetobacter baumannii, Enterobacter cloacae), including extended spectrum beta-lactamases and carbapenemases producers. All isolates showed a MoO3 NP MIC of 700-800 mg l^-1. MoO3 NP produced a clear inhibition zone for S. aureus and all Gram-negative isolates at concentrations ≥25 mg ml^-1 and ≥50 mg ml^-1 for enterococci. When the NP solutions were adjusted to pH ~7, the biocidal activity was completely abolished. MoO3 NP create an acidic pH and show a universal antimicrobial activity against susceptible and resistant isolates belonging to the most relevant bacterial species responsible for hospital-acquired infections.

Biomodification Strategies for the Development of Antimicrobial Urinary Catheters: Overview and Advances

Microbial burden associated with medical devices poses serious health challenges and is accountable for an increased number of deaths leading to enormous medical costs. Catheter-associated urinary tract infections are the most common hospital-acquired infections with enhanced patient morbidity. Quite often, catheter-associated bacteriuria produces apparent adverse outcomes such as urosepsis and even death. Taking this into account, the methods to modify urinary catheters to control microbial infections with relevance to clinical drug resistance are systematically evaluated in this review. Technologies to restrict biofilm formation at initial stages by using functional nanomaterials are elucidated. The conventional methodology of using single therapeutic intervention for developing an antimicrobial catheter lacks clinically meaningful benefit. Therefore, catheter modification using naturally derived antimicrobials such as essential oils, curcumin, enzymes, and antimicrobial peptides in combination with synthetic antibiotics/nanoantibiotics is likely to exert sufficient inhibitory effect on uropathogens and is extensively discussed. Futuristic efforts in this area are projected here that demand clinical studies to address areas of uncertainty to avoid development of bacterial resistance to the new generation therapy with minimum discomfort to the patients.

Silver-pig skin nanocomposites and mesenchymal stem cells: suitable antibiofilm cellular dressings for wound healing

Background

Treatment of severe or chronic skin wounds is an important challenge facing medicine and a significant health care burden. Proper wound healing is often affected by bacterial infection; where biofilm formation is one of the main risks and particularly problematic because it confers protection to microorganisms against antibiotics. One avenue to prevent bacterial colonization of wounds is the use of silver nanoparticles (AgNPs); which have proved to be effective against non-multidrug-resistant and multidrug-resistant bacteria. In addition, the use of mesenchymal stem cells (MSC) is an excellent option to improve wound healing due to their capability for differentiation and release of relevant growth factors. Finally, radiosterilized pig skin (RPS) is a biomatrix successfully used as wound dressing to avoid massive water loss, which represents an excellent carrier to deliver MSC into wound beds. Together, AgNPs, RPS and MSC represent a potential dressing to control massive water loss, prevent bacterial infection and enhance skin regeneration; three essential processes for appropriate wound healing with minimum scaring.

Results

We synthesized stable 10 nm-diameter spherical AgNPs that showed 21- and 16-fold increase in bacteria growth inhibition (in comparison to antibiotics) against clinical strains Staphylococcus aureus and Stenotrophomonas maltophilia, respectively. RPS samples were impregnated with different AgNPs suspensions to develop RPS-AgNPs nanocomposites with different AgNPs concentrations. Nanocomposites showed inhibition zones, in Kirby–Bauer assay, against both clinical bacteria tested. Nanocomposites also displayed antibiofilm properties against S. aureus and S. maltophilia from RPS samples impregnated with 250 and 1000 ppm AgNPs suspensions, respectively. MSC were isolated from adipose tissue and seeded on nanocomposites; cells survived on nanocomposites impregnated with up to 250 ppm AgNPs suspensions, showing 35% reduction in cell viability, in comparison to cells on RPS. Cells on nanocomposites proliferated with culture days, although the number of MSC on nanocomposites at 24 h of culture was lower than that on RPS.

Conclusions

AgNPs with better bactericide activity than antibiotics were synthesized. RPS-AgNPs nanocomposites impregnated with 125 and 250 ppm AgNPs suspensions decreased bacterial growth, decreased biofilm formation and were permissive for survival and proliferation of MSC; constituting promising multi-functional dressings for successful treatment of skin wounds.

Electronic supplementary material

The online version of this article (10.1186/s12951-017-0331-0) contains supplementary material, which is available to authorized users.