Enhanced algal CO(2) sequestration through calcite deposition by Chlorella sp. and Spirulina platensis in a mini-raceway pond

Unraveling the Potential of Electrochemical pH-Swing Processes for Carbon Dioxide Capture and Utilization

Global warming, driven by the accumulation of anthropogenic greenhouse gases, particularly CO2, in the atmosphere, has garnered significant attention due to its detrimental environmental impacts. To combat this critical issue, the deployment of CO2 capture and utilization (CCU) strategies has been considered as one of the technology-based solutions, leading to extensive scientific and engineering research. Electrochemical pH-swing (EPS) processes offer a promising approach to diverse CCU pathways, such as the delivery of pure CO2 gas, the delivery of bicarbonate (e.g., for microalgae cultivation), and the formation of carbonate minerals. In this study, we discuss several CCU pathways using EPS and provide an in-depth analysis of its mechanisms and potential applications, outlining its limitations from both thermodynamic and kinetic standpoints. The EPS process has demonstrated remarkable capabilities, achieving a CO2 capture efficiency of over 90% and unlocking valuable opportunities for CCU applications. We also develop an initial techno-economic assessment and provide the perspectives and challenges for future development and deployment of EPS. This study sheds light on the integration of EPS with CCU, closing the carbon cycle by effectively utilizing the products generated through the process, such as carbonate minerals and bicarbonate solution. For instance, the bicarbonate product can serve as a viable feedstock for bicarbonate-based microalgae production systems, with the added benefit of reducing costs by 40-80% compared to traditional gaseous CO2 delivery approaches. By integration of electrochemical technologies with CCU methods, this study underscores the immense potential for mitigating CO2 emissions and advancing sustainable practices to combat global warming. This study not only addresses the urgent need for effective solutions but also paves the way for a greener and more sustainable future.

Biophotovoltaic living hydrogel of an ion-crosslinked carboxymethylated cellulose nanofiber/alginate

Due to the low electrical power generation in liquid cultures of photosynthetic microalgae, a solid medium culture is demanded for the efficient design of biophotovoltaic (BPV) cells. In particular, the conductivity of the culture medium and the contact of microalgae with an electrode are crucial in harvesting electrons in BPV cells. Here, an ion-crosslinked carboxymethylated cellulose nanofiber (CM-CNF)/alginate is proposed as a living hydrogel for the green power generation of Chlorella vulgaris embedded in the hydrogel. The hydrogel crosslinked with Ca2+ and Fe3+ ions showed more efficient BPV properties than the hydrogel crosslinked with only Ca2+ due to the increase of conductivity. The efficient transport of electrons generated by C. vulgaris improves the power generation of BPV cells. Moreover, the fluid channels imprinted in the living hydrogel maintain the viability of C. vulgaris even under the ambient environment by preventing the solid medium from being dried out.

Exploring a high-urease activity Bacillus cereus for self-healing concrete via induced CaCO3 precipitation

The structural integrity and esthetic appeal of concrete can be compromised by concrete cracks. Promise has been shown by microbe-induced calcium carbonate precipitation (MICP) as a solution for concrete cracking, with a focus on urease-producing microorganisms in research. Bacillus cereus was isolated from soil and employed for this purpose in this study due to its high urease activity. The strain exhibited strong tolerance for alkaline media and high salt levels, which grew at a pH of 13 and 4% salt concentration. The repair of concrete cracks with this strain was evaluated by assessing the effects of four different thickeners at varying concentrations. The most effective results were achieved with 10 g/L of sodium carboxymethyl cellulose (CMC-Na). The data showed that over 90% repair of cracks was achieved by this system with an initial water penetration time of 30 s. The study also assessed the quantity and sizes of crystals generated during the bacterial mineralization process over time to improve our understanding of the process. KEY POINTS: • MICP using Bacillus cereus shows potential for repairing concrete cracks. • Strain tolerates alkaline media and high salt levels, growing at pH 13 and 4% salt concentration. • Sodium carboxymethyl cellulose (CMC-Na) at 10 g/L achieved over 90% repair of cracks.

Unlocking the potential of microbes: biocementation technology for mine tailings restoration - a comprehensive review

Mine tailings contain finer particles, crushed rocks, dugout-soil, water, and organic and inorganic metals or metalloids, including heavy metals and radionuclides, which are dumped as waste or non-economic by-products generated during mining and mineral processing. These abundant and untreated materials seriously threaten the environment, human health, and biodiversity because of the presence of heavy metals, radionuclides, and associated primary and secondary toxic components, including the risk of tailings dam failures. Biocementation technology, which involves the use of mining microbes to secrete cement-like materials that bind soil particles together, is a promising approach to restore mine tailing sites and reduce their mobility and toxicity. However, there is a lack of literature on the combined interactions among mining microbes, tailings residues, biocementation, and low-carbon cement (LCC) prospects. This comprehensive review article explores the prospects of mining microbes for mine tailings restoration using biocementation technology, the key influencing factors and their impact, mechanisms and metabolic pathways, and the effectiveness of biocementation technology in restoring mine tailings sites. In addition, it reviews the utilization of mine tailings materials as an alternative source of cement or construction materials for LCC technology. Furthermore, this review highlights the important issues, challenges, limitations, and applications of biocementation technology for mine tailings rehabilitation. Finally, it provides insights for future research and implementation of biocementation for mine tailings restoration and utilization of tailing materials in the industrial sector to reduce carbon emissions/footprints and achieve net-zero goals.

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO₂)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO₂), cement production (8-15% CO₂), coke production (18-23% CO₂), and ore smelting (6-7% CO₂). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NO_X) and sulfur dioxide (SO₂)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

Application of multi-gene genetic programming technique for modeling and optimization of phycoremediation of Cr(VI) from wastewater

Background

Removal of Cr(VI) from wastewater is essential as it is potentially toxic and carcinogenic in nature. Bioremediation of heavy metals using microalgae is a novel technique and has several advantages such as microalgae remove metals in an environmentally friendly and economic manner. The present study deals with modeling and optimization of the phycoremediation of Cr(VI) from synthetic wastewater. The initial concentration of Cr(VI), initial pH, and inoculum size were considered as input factors, and the percentage removal of Cr(VI) was chosen as a response.

Results

An accurate data-driven genetic programming model was developed with the experimental data of other scientists to find a relation between the percentage removal of Cr(VI) and all input parameters. To maximize the removal of Cr(VI), the grey wolf optimization technique was applied to determine the optimal values of input parameters.

Conclusion

These optimum input parameters are difficult to get through experimentation using the trial-and-error method. The established modelling and optimization technique is generic and can be applied to any other experimental study.

Graphical Abstract

Novel effective bioprocess for optimal CO2 fixation via microalgae-based biomineralization under semi-continuous culture

In this study, the effects of microalgae-based biomineralization in a semi-continuous process (M-BSP) on biomass productivity and CO2 fixation rate were investigated. M-BSP significantly improved biomass production and CO2 fixation rate at the second stage of induction by sustaining relatively high photosynthetic rate without exposure to toxic substances (e.g., chlorellin) from aging cells using the microalgae Chlorella HS2. In conventional systems, cells do not receive irradiated light evenly, and many cells age and burst because of the long culture period. In contrast, in the M-BSP, the photosynthesis efficiency increases and biomass production is not inhibited because most of the cells can be harvested during shorter culture period. The accumulated biomass production and CO2 fixation rate of the HS2 cells cultured under M-BSP increased by 4.67- (25 ± 1.09 g/L) and 10.9-fold (30.29 ± 1.79 g/L day-1), respectively, compared to those cultured without the CaCl2 treatment.

Widespread bacterial responses and their mechanism of bacterial metallogenic detoxification under high concentrations of heavy metals

Microbial mineralization is increasingly used in bioremediation of heavy metal pollution, but better mechanistic understanding of the processes involved and how they are regulated are required to improve the practical application of microorganisms in bioremediation. We used a combination of morphological (TEM) and analytical (XRD, XPS, FTIR) methods, together with novel proteomic analyses, to investigate the detoxification mechanisms, used by a range of bacteria, including the strains Bacillus velezensis LB002, Escherichia coli DH5α, B. subtilis 168, Pseudomonas putida KT2440, and B. licheniformis MT-1, exposed to elevated concentrations of Cd²⁺ and combinations of Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺, in the presence and absence of added CaCl₂. Common features of detoxification included biomineralization, including the production of biological vaterite, up-regulation of proteins involved in flagellar movement and chemotaxis, biofilm synthesis, transmembrane transport of small molecules and organic matter decomposition. The putative roles of differentially expressed proteins in detoxification are discussed in relation to chemical and morphological data and together provide important tools to improve screening, selection, and practical application of bacterial isolates in bioremediation of polluted environments.

Protection of the DNA from Selected Species of Five Kingdoms in Nature by Ba(II), Sr(II), and Ca(II) Silica-Carbonates: Implications about Biogenicity and Evolving from Prebiotic Chemistry to Biological Chemistry

The origin of life on Earth is associated with the Precambrian era, in which the existence of a large diversity of microbial fossils has been demonstrated. Notwithstanding, despite existing evidence of the emergence of life many unsolved questions remain. The first question could be as follows: Which was the inorganic structure that allowed isolation and conservation of the first biomolecules in the existing reduced conditions of the primigenial era? Minerals have been postulated as the ones in charge of protecting theses biomolecules against the external environment. There are calcium, barium, or strontium silica-carbonates, called biomorphs, which we propose as being one of the first inorganic structures in which biomolecules were protected from the external medium. Biomorphs are structures with different biological morphologies that are not formed by cells, but by nanocrystals; some of their morphologies resemble the microfossils found in Precambrian cherts. Even though biomorphs are unknown structures in the geological registry, their similarity with some biological forms, including some Apex fossils, could suggest them as the first "inorganic scaffold" where the first biomolecules became concentrated, conserved, aligned, and duplicated to give rise to the pioneering cell. However, it has not been documented whether biomorphs could have been the primary structures that conserved biomolecules in the Precambrian era. To attain a better understanding on whether biomorphs could have been the inorganic scaffold that existed in the primigenial Earth, the aim of this contribution is to synthesize calcium, barium, and strontium biomorphs in the presence of genomic DNA from organisms of the five kingdoms in conditions emulating the atmosphere of the Precambrian era and that CO₂ concentration in conditions emulating current atmospheric conditions. Our results showed, for the first time, the formation of the kerogen signal, which is a marker of biogenicity in fossils, in the biomorphs grown in the presence of DNA. We also found the DNA to be internalized into the structure of biomorphs.

Emerging trends in environmental and industrial applications of marine carbonic anhydrase: a review

Biocatalytic conversion of greenhouse gases such as carbon dioxide into commercial products is one of the promising key approaches to solve the problem of climate change. Microbial enzymes, including carbonic anhydrase, NAD-dependent formate dehydrogenase, ribulose bisphosphate carboxylase, and methane monooxygenase, have been exploited to convert atmospheric gases into industrial products. Carbonic anhydrases are Zn²⁺-dependent metalloenzymes that catalyze the reversible conversion of CO₂ into bicarbonate. They are widespread in bacteria, algae, plants, and higher organisms. In higher organisms, they regulate the physiological pH and contribute to CO₂ transport in the blood. In plants, algae, and photosynthetic bacteria carbonic anhydrases are involved in photosynthesis. Converting CO₂ into bicarbonate by carbonic anhydrases can solidify gaseous CO2, thereby reducing global warming due to the burning of fossil fuels. This review discusses the three-dimensional structures of carbonic anhydrases, their physiological role in marine life, their catalytic mechanism, the types of inhibitors, and their medicine and industry applications.

Integrated Approach for Carbon Sequestration and Wastewater Treatment Using Algal–Bacterial Consortia: Opportunities and Challenges

Increasing concentrations of carbon dioxide (CO2), one of the important greenhouse gases, due to combustion of fossil fuels, particularly burning coal, have become the major cause for global warming. As a consequence, many research programs on CO2 management (capture, storage, and sequestration) are being highlighted. Biological sequestration of CO2 by algae is gaining importance, as it makes use of the photosynthetic capability of these aquatic species to efficiently capture CO2 emitted from various industries and converting it into algal biomass as well as a wide range of metabolites such as polysaccharides, amino acids, fatty acids, pigments, and vitamins. In addition, their ability to thrive in rugged conditions such as seawater, contaminated lakes, and even in certain industrial wastewaters containing high organic and inorganic nutrients loads, has attracted the attention of researchers to integrate carbon capture and wastewater treatment. Algae offer a simple solution to tertiary treatments due to their nutrient removal efficiency, particularly inorganic nitrogen and phosphorus uptake. The algal–bacterial energy nexus is an important strategy capable of removing pollutants from wastewater in a synergistic manner. This review article highlights the mechanism involved in biological fixation of CO2 by microalgae, their cultivation systems, factors influencing algal cultivation in wastewater and CO2 uptake, the effect of co-cultivation of algae and bacteria in wastewater treatment systems, and challenges and opportunities.

Biocomposites Using Whole or Valuable Component-Extracted Microalgae Blended with Polymers: A Review

Global demand for plastics has increased steadily alongside industrial development. Despite their versatility and convenience, environmental pollution caused by plastics are a major issue. With a reduction in the market size of plastics being seemingly impossible, bioplastics may become key to tackle this issue. Among a wide range of sources of bioplastics, microalgae have come into the limelight. While abundant and valuable components in microalgae have the potential to replace preexisting plastics, complex processes and low cost performances have prevented them from entering the market. In this study, we examined techniques for biocomposites in which polymers are blended with microalgae. We focused on microalgae-based biocomposite blending processed from the perspective of functionality and cost performance.

Role of Microalgae in Global CO2 Sequestration: Physiological Mechanism, Recent Development, Challenges, and Future Prospective

The rising concentration of global atmospheric carbon dioxide (CO2) has severely affected our planet’s homeostasis. Efforts are being made worldwide to curb carbon dioxide emissions, but there is still no strategy or technology available to date that is widely accepted. Two basic strategies are employed for reducing CO2 emissions, viz. (i) a decrease in fossil fuel use, and increased use of renewable energy sources; and (ii) carbon sequestration by various biological, chemical, or physical methods. This review has explored microalgae’s role in carbon sequestration, the physiological apparatus, with special emphasis on the carbon concentration mechanism (CCM). A CCM is a specialized mechanism of microalgae. In this process, a sub-cellular organelle known as pyrenoid, containing a high concentration of Ribulose-1,5-bisphosphate carboxylase-oxygenase (Rubisco), helps in the fixation of CO2. One type of carbon concentration mechanism in Chlamydomonas reinhardtii and the association of pyrenoid tubules with thylakoids membrane is represented through a typical graphical model. Various environmental factors influencing carbon sequestration in microalgae and associated techno-economic challenges are analyzed critically.

Study on Spirulina platensis growth employing non-linear analysis of biomass kinetic models

Spirulina platensis has been considered a promising source of food supplement to combat malnutrition worldwide. Numerous investigations have stated its immune activity, ability to absorb CO2 during the growth period, and antioxidant potential. Well-known theoretical biomass kinetic model sheds are capable of qualitative analysis of the fast microalgae growth. In this regard, we considered eight popular biomass models: Monod, Haldane, Andrews & Noack, Teissier, Hinshelwood, Yano & Koga, Webb and, Aiba model comprising analytical investigation within the numerical simulation. Besides, in this study, we establish a new mathematical biomass growth model by merging the well-known Hinshelwood and Yano & Koga models. We explored the most suitable Spirulina growth model to minimize the overstated and understated growth trends in the assorted eight biomass kinetic models. Our findings show microalgae biomass growth and substrate diminishes along with time, and these results were compared with available experimental data. Results present a high value of R2(0.9862), a low value of RSS (0.0813), AIC (-9.7277), and BIC (-8.2148) implied significantly fitted with the investigated data for the growth of Spirulina platensis compared with popular eight studied models.

Marine Microalgae Contribution to Sustainable Development

The burning of fossil fuels is an unsustainable activity, which is leading to an increase in greenhouse gases (GHGs) emissions and related global warming. Among sustainable energy sources, microalgae represent a promising alternative to fossil fuel and contribute to the achievement of important Sustainable Development Goals (SDGs). In particular, the potential contribution of marine microalgae to sustainable development is large as, among other benefits, they represent a carbon negative energy source and may be applied in many coastal areas around the world. Despite this, significant economic and technological improvements are needed in order to make microalgae biofuels viable on a large scale. This review aims to explore how and to what extent third-generation biofuels (marine microalgae, but also the latest advances in freshwater microalgae) can benefit the realization of these SDGs. From this study we concluded that the production of large-scale marine microalgae biofuels is not yet feasible from the economic perspective at a large scale. However, the cultivation of microalgae in seawater holds great potential for increasing the small to medium viability of this biofuel source. The possibilities for improvement along with the contributions to sustainable development lay the groundwork for continuing to study and apply the potential of sustainable production of microalgae bioenergy.

Bio-mineralisation, characterization, and stability of calcium carbonate containing organic matter

The composition of organic matter in biogenic calcium carbonate has long been a mystery, and its role has not received sufficient attention. This study is aimed at elucidating the bio-mineralisation and stability of amorphous calcium carbonate (ACC) and vaterite containing organic matter, as induced by Bacillus subtilis. The results showed that the bacteria could induce various structural forms of CaCO3, such as biogenic ACC (BACC) or biogenic vaterite (BV), using the bacterial cells as their template, and the carbonic anhydrase secreted by the bacteria plays an important role in the mineralisation of CaCO3. The effects of Ca2+ concentration on the crystal structure of CaCO3 were ascertained; when the amount of CaCl2 increased from 0.1% (m/v) to 0.8% (m/v), the ACC was transformed to polycrystalline vaterite. The XRD results demonstrated that the ACC and vaterite have good stability in air or deionised water for one year, or even when heated to 200 °C or 300 °C for 2 h. Moreover, the FTIR results indicated that the BACC or BV is rich in organic matter, and the contents of organic matter in biogenic ACC and vaterite are 39.67 wt% and 28.47 wt%, respectively. The results of bio-mimetic mineralisation experiments suggest that the protein secreted by bacterial metabolism may be inclined to inhibit the formation of calcite, while polysaccharide may be inclined to promote the formation of vaterite. Our findings advance our knowledge of the CaCO3 family and are valuable for future research into organic-CaCO3 complexes.

Algae utilization and its role in the development of green cities

With the rapid urbanisation happening around the world followed by the massive demand for clean energy resources, green cities play a pivotal role in building a sustainable future for the people. The continuing depletion of natural resources has led to the development of renewable energy with algae as the promising source. The high growth rate of microalgae and their strong bio-fixation ability to convert CO₂ into O₂ have been gaining attention globally and intensive research has been conducted regarding the microalgae benefits. The focus on potential of microalgae in contributing to the development of green cities is rising. The advantage of microalgae is their ability to gather energy from sunlight and carbon dioxide, followed by transforming the nutrients into biomass and oxygen. This leads to the creation of green cities through algae cultivation as waste and renewable materials can be put to good use. The challenges that arise when using algae and the future prospect in terms of SDGs and economy will also be covered in this review. The future of green cities can be enhanced with the adaptation of algae as the source of renewable plants to create a better outlook of an algae green city.

Controlling of two destructive zooplanktonic predators in Chlorella mass culture with surfactants

BACKGROUND

Predatory flagellates and ciliates are two common bio-contaminants which frequently cause biomass losses in Chlorella mass culture. Efficient and targeted ways are required to control these contaminations in Chlorella mass cultivation aiming for biofuel production especially.

RESULTS

Five surfactants were tested for its ability to control bio-contaminations in Chlorella culture. All five surfactants were able to eliminate the contaminants at a proper concentration. Particularly the minimal effective concentrations of sodium dodecyl benzene sulfonate (SDBS) to completely eliminate Poterioochromonas sp. and Hemiurosomoida sp. were 8 and 10 mg L^-1, respectively, yet the photosynthesis and viability of Chlorella was not significantly affected. These results were further validated in Chlorella mass cultures in 5, 20, and 200 m² raceway ponds.

CONCLUSIONS

A chemical method using 10 mg L^-1 SDBS as pesticide to control predatory flagellate or ciliate contamination in Chlorella mass culture was proposed. The method helps for a sustained microalgae biomass production and utilization, especially for biofuel production.

Carbonate biomineralization differentially induced by two psychrophilic Pseudomonas psychrophila strains isolated from an alpine travertine landform

Besides geography and climate, biological factors play an important role in shaping travertine landforms, but the biochemical mechanisms of microbial processes in travertine formation have been rarely studied. Two psychrophilic bacterial strains, A20-18 and B21-3 of Pseudomonas psychrophila, isolated from travertine pools of Huanglong, a typical alpine travertine landform, were investigated for their roles in calcium carbonate mineralization, including the deposition process and products. X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy were used to characterize the crystal phase and morphology of CaCO₃ precipitation. The results showed that there were no significant differences between the two strains in CaCO₃ deposition rate. Extracellular polymeric substances (EPS)-free cells significantly inhibited calcification, compared with a control. Irregular crystals and polyhedral structures are common to all treatments using the two strains. These complex polycrystals were the result of the synergistic effect of homogeneous nucleation and heterogeneous nucleation. EPS and cells of strain B21-3 formed ring-like structures of calcium carbonate, which was possibly from the amphiphilic polymer forming a circular arrangement in water. These results are significant for understanding the microbial factor in Huanglong travertine deposition and providing new insights into the morphological control of the biomineralization mechanism at low temperatures.

Calcium carbonate crystals induced by two Pseudomonas psychrophila strains and their organic compounds were studied.

The effects of cardiac drugs on human erythrocyte carbonic anhydrase I and II isozymes

Cardiovascular diseases are the leading cause of mortality worldwide. In recent years, the relationship between carbonic anhydrase inhibitors and atherosclerosis has attracted attention. In this study, we aimed to determine the in vitro effects of 35 frequently used cardiac drugs on human carbonic anhydrase I (hCA I) and II (hCA II). The inhibitory effects of the drugs on hCA I and hCA II were determined with both the hydratase and esterase methods. The most potent inhibitors observed were propafenone (hCA I: 2.8 µM and hCA II: 3.02 µM) and captopril (hCA I: 1.58 µM and hCA II: 6.25 µM). Isosorbide mononitrate, propranolol, furosemide, and atorvastatin were also potent inhibitors. The inhibitor constant, Ki, value from the Lineweaver-Burk plot for propafenone was 2.38 µM for hCA I and 2.97 µM for hCA II. The tested cardiac drugs showed potent in vitro inhibition of the hCA I and II isozymes. Especially, in patients with atherosclerotic heart disease, these drugs may be preferred primarily due to the beneficial effects of carbonic anhydrase inhibition on atherosclerosis.

Enhancement of Biomass and Calcium Carbonate Biomineralization of Chlorella vulgaris through Plackett-Burman Screening and Box-Behnken Optimization Approach

The biosynthesis of calcium carbonate (CaCO₃) minerals through a metabolic process known as microbially induced calcium carbonate precipitation (MICP) between diverse microorganisms, and organic/inorganic compounds within their immediate microenvironment, gives rise to a cementitious biomaterial that may emerge as a promissory alternative to conventional cement. Among photosynthetic microalgae, Chlorella vulgaris has been identified as one of the species capable of undergoing such activity in nature. In this study, response surface technique was employed to ascertain the optimum condition for the enhancement of biomass and CaCO₃ precipitation of C. vulgaris when cultured in Blue-Green (BG)-11 aquaculture medium. Preliminary screening via Plackett–Burman Design showed that sodium nitrate (NaNO₃), sodium acetate, and urea have a significant effect on both target responses (p < 0.05). Further refinement was conducted using Box–Behnken Design based on these three factors. The highest production of 1.517 g/L C. vulgaris biomass and 1.143 g/L of CaCO₃ precipitates was achieved with a final recipe comprising of 8.74 mM of NaNO₃, 61.40 mM of sodium acetate and 0.143 g/L of urea, respectively. Moreover, polymorphism analyses on the collected minerals through morphological examination via scanning electron microscopy and crystallographic elucidation by X-ray diffraction indicated to predominantly calcite crystalline structure.

Pelagic Sargassum spp. capture CO2 and produce calcite

Pelagic Sargassum is considered an ecological plague that is causing adverse economic impacts to the tourist and fishing industries in the Caribbean. However, its proliferation might be playing an important role to reduce global warming, as it removes a high content of CO2 from the atmosphere and transforms it into calcium carbonate, in its calcite phase, producing sediment after it dies. We quantified the amount of calcite in Sargassum samples collected from the Mexican Caribbean coast in 2019. Samples were divided into three parts: vesicles, thallus, and leaves. In each part, the amount of carbon, oxygen, and calcium was determined by means of X-ray energy dispersion to confirm the existence of a calcite crystalline phase. Imaging methodologies and IR spectroscopy complemented the structural studies. The thermogravimetric analysis determined that approximately 5% of the CO2 captured by the Sargassum was converted into calcite. Thus, by extrapolation, the Atlantic Sargasso Belt retained approximately 19.3 million tons of CO2 from 2011 to 2019.

Enhancement of biofuel production by microalgae using cement flue gas as substrate

The cement industry generates a substantial amount of gaseous pollutants that cannot be treated efficiently and economically using standard techniques. Microalgae, a promising bioremediation and biodegradation agent used as feedstock for biofuel production, can be used for the biotreatment of cement flue gas. In specific, components of cement flue gas such as carbon dioxide, nitrogen, and sulfur oxides are shown to serve as nutrients for microalgae. Microalgae also have the capacity to sequestrate heavy metals present in cement kiln dust, adding further benefits. This work provides an extensive overview of multiple approaches taken in the inclusion of microalgae biofuel production in the cement sector. In addition, factors influencing the production of microalgal biomass are also described in such an integrated plant. In addition, process limitations such as the adverse impact of flue gas on medium pH, exhaust gas toxicity, and efficient delivery of carbon dioxide to media are also discussed. Finally, the article concludes by proposing the future potential for incorporating the microalgae biofuel plant into the cement sector.

Biomarkers of vascular calcification in serum

Over the last decades, the association between vascular calcification (VC) and all-cause/cardiovascular mortality, especially in patients with high atherogenic status, such as those with diabetes and/or chronic kidney disease, has been repeatedly highlighted. For over a century, VC has been noted as a passive, degenerative, aging process without any treatment options. However, during the past decades, studies confirmed that mineralization of the arteries is an active, complex process, similar to bone genesis and formation. The main purpose of this review is to provide an update of the existing biomarkers of VC in serum and develop the various pathogenetic mechanisms underlying the calcification process, including the pivotal roles of matrix Gla protein, osteoprotegerin, bone morphogenetic proteins, fetuin-a, fibroblast growth-factor-23, osteocalcin, osteopontin, osteonectin, sclerostin, pyrophosphate, Smads, fibrillin-1 and carbonic anhydrase II.

Carbon biofixation and lipid composition of an acidophilic microalga cultivated on treated wastewater supplied with different CO2 levels

This study evaluated productivity, CO₂ biofixation, and lipid content in biomass of the acidophilic microalga Chlamydomonas acidophila LAFIC-004 cultivated with five different carbon dioxide concentrations. The influence of carbon dioxide concentration on nutrient removal and pH was also investigated. Treated wastewater (secondary effluent) was used as culture medium. Five experimental setups were tested: T-0% - injection of atmospheric air (0.038% CO₂), T-5% (5% CO₂), T-10% (10% CO₂), T-15% (15% CO₂) and T-20% (20% CO₂). The T-5% and T-10% experiments showed the highest values of productivity and CO₂ biofixation, and maximum biomass dry weight was 0.48 ± 0.02 and 0.51 ± 0.03 g L^-1, respectively. This acidophilic microalga proved to be suitable for carbon biofixation and removal of nutrients from secondary effluent of wastewater treatment plants with high CO₂ concentration. All assays were performed without pH control. This microalga species presented high lipid content. However, fatty acid methyl esters (FAME) are not suitable for biodiesel use.

Modification and improvement of microalgae strains for strengthening CO2 fixation from coal-fired flue gas in power plants

Biological CO₂ capture using microalgae is a promising new method for reducing CO₂ emission of coal-fired flue gas. The strain of microalgae used in this process plays a vital role in determining the rate of CO₂ fixation and characteristics of biomass production. High requirements are put forward for algae strains due to high CO₂ concentration and diverse pollutants in flue gas. CO₂ can directly diffuse into the cytoplasm of cells by extra- and intracellular CO₂ osmotic pressure under high CO₂ concentrations. The flue gas pollutants, such as SO_x, NO_x and fly ashes, have negative effects on the growth of microalgae. This work reviewed the state-of-the-art advances on microalgae strains used for CO₂ fixation, focusing on the modification and improvement of strains that are used for coal-fired flue gas. Methods such as genetic engineering, random mutagenesis, and adaptive evolution have the potential to facilitate photosynthesis, improve growth rate and reduce CO₂ emission.

Enhanced biomass and lipid production of Neochloris oleoabundans under high light conditions by anisotropic nature of light-splitting CaCO3 crystal

The aim of this work was to study the anisotropic effect of crystalline CaCO₃ nanoparticles (CN)-driven multiple refraction/scattering from the CN-coated agglomerated cells on the rate of photosynthesis and the product yield under high light conditions in the freshwater microalgae Neochloris oleoabundans. The CN-coating via biomineralization significantly improved the biomass and lipid production of N. oleoabundans during second stage of autotrophic induction by sustaining relatively high rate of photosynthesis at high irradiance using the multiple-splitting effect of the anisotropic polymorphism. The CN were successfully produced, adsorbed and grown on the external cells under conditions of mild alkalinity (pH 7.5-8.0), mild CaCl₂ concentration (0.05 M) and under nitrogen starvation with strong light (400 µE m^-2 s^-1). Consequently, lipid content and productivity of N. oleoabundans cells cultured with 0.05 M CaCl₂ increased by 18.4% and 31.5%, respectively, compared to the cells cultured with 0.05 M CaCl₂ and acetazolamide to inhibit calcification.

Microbially induced calcium carbonate precipitation: a widespread phenomenon in the biological world

Biodeposition of minerals is a widespread phenomenon in the biological world and is mediated by bacteria, fungi, protists, and plants. Calcium carbonate is one of those minerals that naturally precipitate as a by-product of microbial metabolic activities. Over recent years, microbially induced calcium carbonate precipitation (MICP) has been proposed as a potent solution to address many environmental and engineering issues. However, for being a viable alternative to conventional techniques as well as being financially and industrially competitive, various challenges need to be overcome. In this review, the detailed metabolic pathways, including ammonification of amino acids, dissimilatory reduction of nitrate, and urea degradation (ureolysis), along with the potent bacteria and the favorable conditions for precipitation of calcium carbonate, are explained. Moreover, this review highlights the potential environmental and engineering applications of MICP, including restoration of stones and concrete, improvement of soil properties, sand consolidation, bioremediation of contaminants, and carbon dioxide sequestration. The key research and development questions necessary for near future large-scale applications of this innovative technology are also discussed.

Carbon Sequestration in Biogenic Magnesite and Other Magnesium Carbonate Minerals

The stability and longevity of carbonate minerals make them an ideal sink for surplus atmospheric carbon dioxide. Biogenic magnesium carbonate mineral precipitation from the magnesium-rich tailings generated by many mining operations could offset net mining greenhouse gas emissions, while simultaneously giving value to mine waste products. In this investigation, cyanobacteria in a wetland bioreactor enabled the precipitation of magnesite (MgCO₃), hydromagnesite [Mg₅(CO₃)₄(OH)₂·4H₂O], and dypingite [Mg₅(CO₃)₄(OH)₂·5H₂O] from a synthetic wastewater comparable in chemistry to what is produced by acid leaching of ultramafic mine tailings. These precipitates occurred as micrometer-scale mineral grains and microcrystalline carbonate coatings that entombed filamentous cyanobacteria. This provides the first laboratory demonstration of low temperature, biogenic magnesite precipitation for carbon sequestration purposes. These findings demonstrate the importance of extracellular polymeric substances in microbially enabled carbonate mineral nucleation. Fluid composition was monitored to determine carbon sequestration rates. The results demonstrate that up to 238 t of CO₂ could be stored per hectare of wetland/year if this method of carbon dioxide sequestration was implemented at an ultramafic mine tailing storage facility. The abundance of tailings available for carbonation and the anticipated global implementation of carbon pricing make this method of mineral carbonation worth further investigation.

Sequential phototrophic-mixotrophic cultivation of oleaginous microalga Graesiella sp. WBG-1 in a 1000 m2 open raceway pond

BACKGROUND

Microalgae are an important feedstock in industries. Currently, efforts are being made in the non-phototrophic cultivation of microalgae for biomass production. Studies have shown that mixotrophy is a more efficient process for producing algal biomass in comparison to phototrophic and heterotrophic cultures. However, cultivation of microalgae in pilot-scale open ponds in the presence of organic carbon substrates has not yet been developed. The problems are heterotrophic bacterial contamination and inefficient conversion of organic carbon.

RESULTS

Laboratory investigation was combined with outdoor cultivation to find a culture condition that favors the growth of alga, but inhibits bacteria. A window period for mixotrophic cultivation of the alga Graesiella sp. WBG-1 was identified. Using this period, a new sequential phototrophic-mixotrophic cultivation (SPMC) method that enhances algal biomass productivity and limits bacteria contamination at the same time was established for microalgae cultivation in open raceway ponds. Graesiella sp. WBG-1 maximally produced 12.5 g biomass and 4.1 g lipids m^-2 day^-1 in SPMC in a 1000 m² raceway pond, which was an over 50% increase compared to phototrophic cultivation. The bacterial number in SPMC (2.97 × 10⁵ CFU ml^-1) is comparable to that of the phototrophic cultivations.

CONCLUSIONS

SPMC is an effective and feasible method to cultivate lipid-rich microalgae in open raceway ponds. Successful scale-up of SPMC in a commercial raceway pond (1000 m² culture area) was demonstrated for the first time. This method is attractive for global producers of not only lipid-rich microalgae biomass, but also astaxanthin and β-carotene.

Microalgae cultivation for phenolic compounds removal

Microalgae are promising sustainable and renewable sources of oils that can be used for biodiesel production. In addition, they contain important compounds, such as proteins and pigments, which have large applications in the food and pharmaceutical industries. Combining the production of these valuable products with wastewater treatment renders the cultivation of microalgae very attractive and economically feasible. This review paper presents and discusses the current applications of microalgae cultivation for wastewater treatment, particularly for the removal of phenolic compounds. The effects of cultivation conditions on the rate of contaminants removal and biomass productivity, as well as the chemical composition of microalgae cells are also discussed.

Sequestration of carbon dioxide and production of biomolecules using cyanobacteria

A cyanobacterial strain, Synechococcus sp. NIT18, has been applied to sequester CO₂ using sodium carbonate as inorganic carbon source due to its efficiency of CO₂ bioconversion and high biomass production. The biomass obtained is used for the extraction of biomolecules - protein, carbohydrate and lipid. The main objective of the study is to maximize the biomass and biomolecules production with CO₂ sequestration using cyanobacterial strain cultivated under different concentrations of CO₂ (5-20%), pH (7-11) and inoculum size (5-12.5%) within a statistical framework. Maximum sequestration of CO₂ and maximum productivities of protein, carbohydrate and lipid are 71.02%, 4.9 mg/L/day, 6.7 mg/L/day and 1.6 mg/L/day respectively, at initial CO₂ concentration: 10%, pH: 9 and inoculum size: 12.5%. Since flue gas contains 10-15% CO₂ and the present strain is able to sequester CO₂ in this range, the strain could be considered as a useful tool for CO₂ mitigation for greener world.

Impact of Flue Gas Compounds on Microalgae and Mechanisms for Carbon Assimilation and Utilization

To shift the world to a more sustainable future, it is necessary to phase out the use of fossil fuels and focus on the development of low-carbon alternatives. However, this transition has been slow, so there is still a large dependence on fossil-derived power, and therefore, carbon dioxide is released continuously. Owing to the potential for assimilating and utilizing carbon dioxide to generate carbon-neutral products, such as biodiesel, the application of microalgae technology to capture CO₂ from flue gases has gained significant attention over the past decade. Microalgae offer a more sustainable source of biomass, which can be converted into energy, over conventional fuel crops because they grow more quickly and do not adversely affect the food supply. This review focuses on the technical feasibility of combined carbon fixation and microalgae cultivation for carbon reuse. A range of different carbon metabolisms and the impact of flue gas compounds on microalgae are appraised. Fixation of flue gas carbon dioxide is dependent on the selected microalgae strain and on flue gas compounds/concentrations. Additionally, current pilot-scale demonstrations of microalgae technology for carbon dioxide capture are assessed and its future prospects are discussed. Practical implementation of this technology at an industrial scale still requires significant research, which necessitates multidisciplinary research and development to demonstrate its viability for carbon dioxide capture from flue gases at the commercial level.

Microalgal bacterial flocs treating paper mill effluent: A sunlight-based approach for removing carbon, nitrogen, phosphorus, and calcium

Treatment of upflow anaerobic sludge blanket (UASB) effluent from a paper mill in aerated activated sludge reactors involves high aeration costs. Moreover, this calcium-rich effluent leads to problematic scale formation. Therefore, a novel strategy for the aerobic treatment of paper mill UASB effluent in microalgal bacterial floc sequencing batch reactors (MaB-floc SBRs) is proposed, in which oxygen is provided via photosynthesis, and calcium is removed via bio-mineralization. Based on the results of batch experiments in the course of this study, a MaB-floc SBR was operated at an initial neutral pH. This SBR removed 58±21% organic carbon, 27±8% inorganic carbon, 77±5% nitrogen, 73±2% phosphorus, and 27±11% calcium. MaB-flocs contained 10±3% calcium, including biologically-influenced calcite crystals. The removal of calcium and inorganic carbon by MaB-flocs significantly decreased when inhibiting extracellular carbonic anhydrase (CA), an enzyme that catalyses the hydration and dehydration of CO₂. This study demonstrates the potential of MaB-floc SBRs for the alternative treatment of calcium-rich paper mill effluent, and highlights the importance of extracellular CA in this treatment process.

Mutation of Spirulina sp. by nuclear irradiation to improve growth rate under 15% carbon dioxide in flue gas

Spirulina sp. was mutated by γ-rays from ⁶⁰Co nuclear irradiation to improve growth and CO₂ fixation rate under 15vol.% CO₂ (in flue gas from a power plant). Mutants with enhanced growth phenotype were obtained, with the best strain exhibiting 310% increment in biomass yield on day 4. The mutant was then domesticated with elevated CO₂ concentration, and the biomass yield increased by 500% after domestication under 15vol.% CO₂, with stable inheritance. Ultrastructure of Spirulina sp. shows that the fractal dimension of Spirulina cells decreased by 23% after mutation. Pore size in the cell wall of Spirulina mutant increased by 33% after 15vol.% CO₂ domestication. This characteristic facilitated the direct penetration of CO₂ into cells, thus improving CO₂ biofixation rate.

Biological CO2 mitigation from coal power plant by Chlorella fusca and Spirulina sp

CO₂ biofixation by microalgae and cyanobacteria is an environmentally sustainable way to mitigate coal burn gas emissions. In this work the microalga Chlorella fusca LEB 111 and the cyanobacteria Spirulina sp. LEB 18 were cultivated using CO₂ from coal flue gas as a carbon source. The intermittent flue gas injection in the cultures enable the cells growth and CO₂ biofixation by these microorganisms. The Chlorella fusca isolated from a coal power plant could fix 2.6 times more CO₂ than Spirulina sp. The maximum daily CO₂ from coal flue gas biofixation was obtained with Chlorella fusca (360.12±0.27mgL^-1d^-1), showing a specific growth rate of 0.17±<0.01d^-1. The results demonstrated the Chlorella fusca LEB 111 and Spirulina sp. LEB 18 potential to fix CO₂ from coal flue gas, and sequential biomass production with different biotechnological destinations.

An overview of biological processes and their potential for CO2 capture

The extensive amount of available information on global warming suggests that this issue has become prevalent worldwide. Majority of countries have issued laws and policies in response to this concern by requiring their industrial sectors to reduce greenhouse gas emissions, such as CO2. Thus, introducing new and more effective treatment methods, such as biological techniques, is crucial to control the emission of greenhouse gases. Many studies have demonstrated CO2 fixation using photo-bioreactors and raceway ponds, but a comprehensive review is yet to be published on biological CO2 fixation. A comprehensive review of CO2 fixation through biological process is presented in this paper as biological processes are ideal to control both organic and inorganic pollutants. This process can also cover the classification of methods, functional mechanisms, designs, and their operational parameters, which are crucial for efficient CO2 fixation. This review also suggests the bio-trickling filter process as an appropriate approach in CO2 fixation to assist in creating a pollution-free environment. Finally, this paper introduces optimum designs, growth rate models, and CO2 fixation of microalgae, functions, and operations in biological CO2 fixation.