A cost-effective strategy for the bio-prospecting of mixed microalgae with high carbohydrate content: diversity fluctuations in different growth media

Emerging microalgae-based biofuels: Technology, life-cycle and scale-up

Microalgae biomass is a versatile feedstock with a variable composition that can be submitted to several conversion routes. Considering the increasing energy demand and the context of third-generation biofuels, algae can fulfill the increasing global demand for energy with the additional benefit of environmental impact mitigation. While biodiesel and biogas are widely consolidated and reviewed, emerging algal-based biofuels such as biohydrogen, biokerosene, and biomethane are cutting-edge technologies in earlier stages of development. In this context, the present study covers their theoretical and practical conversion technologies, environmental hotspots, and cost-effectiveness. Scaling-up considerations are also addressed, mainly through Life Cycle Assessment results and interpretation. Discussions on the current literature for each biofuel directs researchers towards challenges such as optimized pretreatment methods for biohydrogen and optimized catalyst for biokerosene, besides encouraging pilot and industrial scale studies for all biofuels. While presenting studies for larger scales, biomethane still needs continuous operation results to consolidate the technology further. Additionally, environmental improvements on all three routes are discussed in light of life-cycle models, highlighting the ample research opportunities on wastewater-grown microalgae biomass.

Microalgae cultivation strategies using cost-effective nutrient sources: Recent updates and progress towards biofuel production

Scientists are grabbing huge attention as well as consciousness on non-renewable energy sources for the global energy crises because of gradual increase in oil price, fast depletion or low availability of resources, and the release of more toxic-gases (CO₂, SO_x, N_xO) during exhaustion, etc. Due to such hitches, the key need is to find alternative biofuels or feedstocks to replace fossil fuel energy demands worldwide. Currently, microalgae have become intrigued feedstock candidates (3rd generation source of biofuel) to replace nearly 50-60 % of fossil fuels due to high production of biomass and oil, mitigating CO₂ and wastewater remediation. The present work demonstrated the current developments and future perspectives on large-scale algal cultivation strategies for the biorefinery economy. In addition, various advanced cultivation techniques adopted for enhanced biomass production and cost-effective methods for bioenergy production were detailly discussed.

Insightful Advancement and Opportunities for Microbial Bioplastic Production

Impetuous urbanization and population growth are driving increased demand for plastics to formulate impeccable industrial and biomedical commodities. The everlasting nature and excruciating waste management of petroleum-based plastics have catered to numerous challenges for the environment. However, just implementing various end-of-life management techniques for assimilation and recycling plastics is not a comprehensive remedy; instead, the extensive reliance on finite resources needs to be reduced for sustainable production and plastic product utilization. Microorganisms, such as bacteria and algae, are explored substantially for their bioplastic production repertoire, thus replacing fossil-based plastics sooner or later. Nevertheless, the utilization of pure microbial cultures has led to various operational and economical complications, opening the ventures for the usage of mixed microbial cultures (MMCs) consisting of bacteria and algae for sustainable production of bioplastic. The current review is primarily focuses on elaborating the bioplastic production capabilities of different bacterial and algal strains, followed by discussing the quintessence of MMCs. The present state-of-the-art of bioplastic, different types of bacterial bioplastic, microalgal biocomposites, operational factors influencing the quality and quantity of bioplastic precursors, embracing the potential of bacteria-algae consortia, and the current global status quo of bioplastic production has been summarized extensively.

Enhancement of Biogas Production from Macroalgae Ulva latuca via Ozonation Pretreatment

One of the dominant species of green algae growing along the Mediterranean coast of Egypt is Ulva lactuca. Pretreatment can have a major effect on biogas production because hydrolysis of the algae cell wall structure is a rate-limiting stage in the anaerobic digestion (AD) process. The use of ozone, a new pretreatment, to boost biogas production from the green algae Ulva lactuca was investigated in this study. Ozonation at various dosages was used in contrast to untreated biomass, and the effect on the performance of subsequent mesophilic AD using two separate inoculums (cow manure and activated sludge) was examined. The findings indicated that, in different studies, ozonation pretreatment showed a substantial increase in biogas yield relative to untreated algae. With an ozone dose of 249 mg O3 g–1 VS algal for Ulva lactuca, the highest biogas output (498.75 mL/g VS) was achieved using cow manure inoculum. The evaluation of FTIR, TGA, SEM, and XRD revealed the impact of O3 on the structure of the algal cell wall and integrity breakage, which was thus established as the main contributor to improving the biogas production.

Biological contamination and its chemical control in microalgal mass cultures

Microalgae are versatile sources of bioproducts, a solution for many environmental problems. However, and despite its importance, one of the main problems in large-scale cultures-the presence of contaminants-is rarely systematically approached. Contamination, or the presence of undesirable organisms in a culture, is deleterious for the culture and frequently leads to culture crashes. To avoid contamination, closed systems can be used; however, for very large-scale open systems, contamination is unavoidable and remediation procedures are necessary-ranging from physicochemical treatment to addition of biocidal substances. In all cases, early detection and culture monitoring are paramount. This article describes the biological contaminants, contamination mechanisms, and control systems used in open and closed cultures, discussing the latest advances and techniques in the area. It also discusses the complex interactions of algae with other microorganisms that can be expected in cultivation systems.

Comparison of monoculture and mixed culture (Scenedesmus obliquus and wild algae) for C, N, and P removal and lipid production

This study compared the efficiency of nutrient removal and lipid accumulation by a monoculture of Scenedesmus obliquus and mixed cultures of microalgae. The highest removal efficiencies of ammonium (99.2%), phosphate (91.2%), and total organic carbon (83.6%) occurred in the monoculture. All the mixed cultures were dominated by S. quadricauda; in some mixed cultures, the proportions of Chlamydomonas reinhardtii and C. microsphaera reached > 20%. The lipid content and lipid production in the monoculture were 15.9% and 52.3 mg kg^-1, respectively, significantly higher than those in all the mixed cultures of microalgae. In all the mixed cultures, the proportion of palmitic acid was > 50%. The results suggest that the monoculture had advantages over the mixed culture of microalgae in terms of nutrient removal and lipid production.

Microalgae Brewery Wastewater Treatment: Potentials, Benefits and the Challenges

Concerns about environmental safety have led to strict regulations on the discharge of final brewery effluents into water bodies. Brewery wastewater contains huge amounts of organic compounds that can cause environmental pollution. The microalgae wastewater treatment method is an emerging environmentally friendly biotechnological process. Microalgae grow well in nutrient-rich wastewater by absorbing organic nutrients and converting them into useful biomass. The harvested biomass can be used as animal feed, as an alternative energy source for biodiesel production and as biofertilizer. This review discusses conventional and current brewery wastewater treatment methods, and the application and potential of microalgae in brewery wastewater treatment. This study also discusses the benefits as well as challenges associated with microalgae brewery and other industrial wastewater treatments.

Production stability and biomass quality in microalgal cultivation - Contribution of community dynamics

The prospect of using constructed communities of microalgae in algal cultivation was confirmed in this study. Three different algal communities, constructed of diatoms (Diatom), green algae (Green), and cyanobacteria (Cyano), each mixed with a natural community of microalgae were cultivated in batch and semi-continuous mode and fed CO2 or cement flue gas (12-15% CO2). Diatom had the highest growth rate but Green had the highest yield. Changes in the community composition occurred throughout the experiment. Green algae were the most competitive group, while filamentous cyanobacteria were outcompeted. Euglenoids, recruited from scarce species in the natural community became a large part of the biomass in semi-steady state in all communities. High temporal and yield stability were demonstrated in all communities during semi-steady state. Valuable products (lipids, proteins, and carbohydrates) comprised 61.5 ± 5% of ash-free biomass and were similar for the three communities with lipids ranging 14-26% of dry mass (DM), proteins (15-28% DM) and carbohydrates (9-23% DM). Our results indicate that culture functions (stability, biomass quality) were maintained while dynamic changes occurred in community composition. We propose that a multispecies community approach can aid sustainability in microalgal cultivation, through complementary use of resources and higher culture stability.

Mexican Microalgae Biodiversity and State-Of-The-Art Extraction Strategies to Meet Sustainable Circular Economy Challenges: High-Value Compounds and Their Applied Perspectives

In recent years, the demand for naturally derived products has hiked with enormous pressure to propose or develop state-of-the-art strategies to meet sustainable circular economy challenges. Microalgae possess the flexibility to produce a variety of high-value products of industrial interests. From pigments such as phycobilins or lutein to phycotoxins and several polyunsaturated fatty acids (PUFAs), microalgae have the potential to become the primary producers for the pharmaceutical, food, and agronomical industries. Also, microalgae require minimal resources to grow due to their autotrophic nature or by consuming waste matter, while allowing for the extraction of several valuable side products such as hydrogen gas and biodiesel in a single process, following a biorefinery agenda. From a Mexican microalgae biodiversity perspective, more than 70 different local species have been characterized and isolated, whereas, only a minimal amount has been explored to produce commercially valuable products, thus ignoring their potential as a locally available resource. In this paper, we discuss the microalgae diversity present in Mexico with their current applications and potential, while expanding on their future applications in bioengineering along with other industrial sectors. In conclusion, the use of available microalgae to produce biochemically revenuable products currently represents an untapped potential that could lead to the solution of several problems through green technologies. As such, if the social, industrial and research communities collaborate to strive towards a greener economy by preserving the existing biodiversity and optimizing the use of the currently available resources, the enrichment of our society and the solution to several environmental problems could be attained.

Effects of light intensity on biomass, carbohydrate and fatty acid compositions of three different mixed consortia from natural ecological water bodies

This study investigated the effect of light intensity on three various microalga consortia collected from natural ecological water bodies (named A, B and C) towards their fatty acid profiling and fractions, carbohydrate and protein production at different light intensities of 100, 200 and 300 μmol m^-2 s^-1. The results indicating that increasing light intensity positively correlated with the lipid production than carbohydrate and protein. Irrespective to the solids (Total and Volatile Solid) content, lipids and carbohydrate has varied significantly. Consortia C showed higher productivity toward lipids, whereas consortia A and B accumulated more carbohydrate and protein, respectively. The microscopic images revealed the breakdown of cells during the increase in light intensity, in spite, the similar algal species were observed in all consortia experimented. Principal component analysis (PCA) revealed that low light intensity aid relatively in high protein, Total Nitrogen and Total Phosphorus, meanwhile high intensity attributed carbohydrates and unsaturated fatty acids (USFA) contents.

Evaluation of gradual adaptation of mixed microalgae consortia cultivation using textile wastewater via fed batch operation

This study investigated mixed microalgae consortia cultivation in a fed batch reactor using textile wastewater. The results showed 95% of total phosphorus (TP) and 70% of total nitrogen (TN) depletion during the operational period. Algal biomass growth, pollutant removal, and biomass constituents were examined for five cycles of the fed batch operation. The length of the cycles decreased from 30 days to 10 days as the cycle repeated, which implied gradual adaptation of microalgae to textile wastewater. Color of textile wastewater was removed in the range of 68-72% in all the cycles experimented. Microbial algal cultivation with textile wastewater would be a feasible approach for remediation and resource recovery purpose.

Cultivation of microalgal biomass using swine manure for biohydrogen production: Impact of dilution ratio and pretreatment

This study assessed the impact of swine manure (SM) dilution ratio on the microalgal biomass cultivation and further tested for biohydrogen production efficiency from the mixed microalgal biomass. At first, various solid/liquid (S/L) ratio of the SM ranged from 2.5 to 10 g/L was prepared as a nutrient medium for the algal biomass cultivation without addition of the external nutrient sources over a period of 18 d. The peak biomass concentration of 2.57 ± 0.03 g/L was obtained under the initial S/L loading rates of 5 g/L. Further, the cultivated biomass was subjected to two-step (ultrasonication + enzymatic) pretreatment and evaluated for biohydrogen production potential. Results showed that the variable amount of hydrogen production was observed with different S/L ratio of the SM. The peak hydrogen yield of 116 ± 6 mL/g TS_added was observed at the 5 g/L grown SM mixed algal biomass.

Photoautotrophic cultivation of mixed microalgae consortia using various organic waste streams towards remediation and resource recovery

In this study, mixed microalgae consortia was cultivated using digestate (D), animal manure (AM) and textile wastewater (TW) as growth medium providing mainly N (nitrogen) and P (phosphorous) sources without any extra nutrient addition. The corresponding total nitrogen (TN) and total phosphorous (TP, PO3-P) concentrations were noted as 323 and 21 for AM, 481 and 31 for TW and 747 and 55mg/L for D, respectively. After a cultivation period of 13days, P were completely removed (100%), however, N was still remain and attained the removal rate of 70.1, 72.3 and 16.7% for TW, AM and D, respectively. The peak growth rate and biomass production of 0.419d^-1 and 0.4g/L (in terms of volatile solids, VS) was achieved using TW as growth medium.

Combined pretreatment of electrolysis and ultra-sonication towards enhancing solubilization and methane production from mixed microalgae biomass

This study investigated the effect of combination of pretreatment methods such as ultra-sonication and electrolysis for the minimum energy input to recover the maximal carbohydrate and solubilization (in terms of sCOD) from mixed microalgae biomass. The composition of the soluble chemical oxygen demand (COD), protein, carbohydrate revealed that the hydrolysis method had showed positive impact on the increasing quantity and thus enhanced methane yields. As a result, the combination of these 2 pretreatments showed the greatest yield of soluble protein and carbohydrate as 279 and 309mg/L, which is the recovery of nearly 85 and 90% in terms of total content of them. BMP tests showed peak methane production yield of 257mL/gVS_added, for the hydrolysate of combined pretreatment as compared to the control experiment of 138mL/gVS added.

Hydrolysis of microalgal biomass using ruminal microorganisms as a pretreatment to increase methane recovery

The use of ruminal fluid as a source of hydrolytic microorganisms for the pretreatment of a native consortium of microalgae (essentially Senedesmus) was investigated. The hydrolytic enzyme activity of the ruminal culture was first enriched in a bioreactor. Then, using the enriched culture, the effect of the microalgae to the ruminal fluid ratio (S/X) on the hydrolysis and subsequent production of methane was investigated. An S/X ratio of 0.5 showed the best hydrolysis efficiency (29%) reaching in a second stage process a methane yield of 193mL CH₄g COD^-1. The processing time (pretreatment plus methanization) was only 7days. The predominant ruminal hydrolytic bacteria selected in the enrichment were principally Clostridium, Proteocatella and Pseudomonas.

Biohydrogen and methane production via a two-step process using an acid pretreated native microalgae consortium

A native microalgae consortium treated under thermal-acidic hydrolysis was used to produce hydrogen and methane in a two-step sequential process. Different acid concentrations were tested, generating hydrogen and methane yields of up to 45mLH₂gVS^-1 and 432mLCH₄gVS^-1, respectively. The hydrogen production step solubilized the particulate COD (chemical oxygen demand) up to 30%, creating considerable amounts of volatile fatty acids (up to 10gCODL^-1). It was observed that lower acid concentration presented higher hydrogen and methane production potential. The results revealed that thermal acid hydrolysis of a native microalgae consortium is a simple but effective strategy for producing hydrogen and methane in the sequential process. In addition to COD removal (50-70%), this method resulted in an energy recovery of up to 15.9kJ per g of volatile solids of microalgae biomass, one of the highest reported.

Effect of microalgae inoculation on the start-up of microalgae-bacteria systems treating municipal, piggery and digestate wastewaters

The effect of the inoculation of a microalgae-bacteria system on the removal of nutrients and organic matter using municipal, piggery and digestate wastewaters was evaluated. Three conditions for each substrate were evaluated: (1) inoculation with activated sludge and illumination, (2) inoculation with activated sludge without illumination, and (3) inoculation with activated sludge plus a native microalgae consortium under illumination. The illuminated reactors that were inoculated only with activated sludge developed microalgae after 12 operation days. In these reactors, the formation of flocs was observed affecting the sedimentation of the biomass positively. The removal of chemical oxygen demand, ammonium and phosphorous reached 84%, 65% and 77%, respectively.

Anaerobic digestion of mixed microalgae cultivated in secondary effluent under mesophilic and thermophilic conditions

The anaerobic digestion of mixed indigenous microalgae, grown in a secondary effluent, was evaluated in batch tests at mesophilic (35°C) and thermophilic (50°C) conditions. Under mesophilic conditions, specific methane production varied from 178 to 207 mL CH4/g volatile solids (VS) and the maximum production rate varied from 8.8 to 26.1 mL CH4/(gVS day), depending on the type of microalgae culture. Lower methane parameters were observed in those cultures where Scenedesmus represents more than 95% of the microalge. The culture with the lowest digestion performances under mesophilic conditions was studied under thermophilic conditions. The increase in the incubation temperature significantly increased the specific methane production (390 mL CH4/g VS) and rate (26.0 mL CH4/(gVS day)). However, under thermophilic conditions a lag period of 30 days was observed.