Biomass hydrolysis inhibition at high hydrogen partial pressure in solid-state anaerobic digestion

An overview of biomethanation and the use of membrane technologies as a candidate to overcome H2 mass transfer limitations

Energy produced from renewable sources such as sun or wind are intermittent, depending on circumstantial factors. This fact explains why energy supply and demand do not match. In this context, the interest in biomethanation has increased as an interesting contribution to the Power-to-gas concept (P2G), transforming the extra amount of produced electricity into methane (CH4). The reaction between green hydrogen (H2) (produced by electrolysis) and CO2 (pollutant present in biogas) can be catalysed by different microorganisms to produce biomethane, that can be injected into existing natural gas grid if reaching the standards. Thus, energy storage for both hydrogen and electricity, as well as transportation problems would be solved. However, H2 diffusion to the liquid phase for its further biological conversion is the main bottleneck due to the low solubility of H2. This review includes the state-of-the-art in biological hydrogenotrophic methanation (BHM) and membrane-based technologies. Specifically, the use of hollow-fiber membrane bioreactors as a technology to overcome H2 diffusion limitations is reviewed. Furthermore, the influence of operating conditions, microbiology, H2 diffusion and H2 injection methods are critically discussed before setting the main recommendations about BHM.

Exploring industrial lignocellulosic waste: Sources, types, and potential as high-value molecules

Lignocellulosic biomass has a promising role in a circular bioeconomy and may be used to produce valuable molecules for green chemistry. Lignocellulosic biomass, such as food waste, agricultural waste, wood, paper or cardboard, corresponded to 15.7% of all waste produced in Europe in 2020, and has a high potential as a secondary raw material for industrial processes. This review first presents industrial lignocellulosic waste sources, in terms of their composition, quantities and types of lignocellulosic residues. Secondly, the possible high added-value chemicals obtained from transformation of lignocellulosic waste are detailed, as well as their potential for applications in the food industry, biomedical, energy or chemistry sectors, including as sources of polyphenols, enzymes, bioplastic precursors or biofuels. In a third part, various available transformation treatments, such as physical treatments with ultrasound or heat, chemical treatments with acids or bases, and biological treatments with enzymes or microorganisms, are presented. The last part discusses the perspectives of the use of lignocellulosic waste and the fact that decreasing the cost of transformation is one of the major issues for improving the use of lignocellulosic biomass in a circular economy and green chemistry approach, since it is currently often more expensive than petroleum-based counterparts.

Artificial subsurface lithoautotrophic microbial ecosystems and gas storage in deep subsurface

Over the next few years, it is planned to convert all or part of the underground gas storage (UGS) facilities used for natural gas (salt caverns, depleted hydrocarbon reservoirs, and deep aquifers) into underground dihydrogen (H2) storage reservoirs. These deep environments host microbial communities, some of which are hydrogenotrophic (sulfate reducers, acetogens, and methanogens). The current state of microbiological knowledge is thus presented for the three types of UGS facilities. In the mid-1990s, the concept of anaerobic subsurface lithoautotrophic microbial ecosystems, or SLiMEs, emerged. It is expected that the large-scale injection of H2 into subsurface environments will generate new microbial ecosystems called artificial SLiMEs, which could persist over time. These artificial SLiMEs could lead to H2 loss, an intense methanogenic activity, a degradation of gas quality and a risk to installations through sulfide production. However, recent studies on salt caverns and deep aquifers suggest that hydrogenotrophic microbial activity also leads to alkalinization (up to pH 10), which can constrain hydrogenotrophy. Therefore, studying and understanding these artificial SLiMEs is both a necessity for the development of the H2 industry and presents an opportunity for ecologists to monitor the evolution of deep environments in real time.

Effects of pressure on the biogeochemical and geotechnical behavior of treated oil sands tailings in a pit lake scenario

Reclamation options for oil sands fluid fine tailings (FFT) are limited due to its challenging geotechnical properties, which include high water and clay contents and low shear strength. A feasible reclamation option for tailings with these properties is water capped FFT deposits (pit lakes). A relatively new proposal is to deposit FFT that has been treated with alum and polyacrylamide in pit lakes. Though over 65 Mm3 of alum/polyacrylamide treated FFT has been deposited to date, there is limited publicly available information on the biogeochemical and geotechnical behavior of this treated FFT. Further, the effects of pressure from overlying tailings on microbial activity and biogeochemical cycling in oil sands tailings has not been previously investigated. Twelve 5.5 L columns were designed to mimic alum/polyacrylamide treated FFT deposited beneath a water cap. A 2x2 factorial design was used to apply pressure and hydrocarbon amendments to the tailings. Pressure (0.3-5.1 kPa) was applied incrementally and columns were monitored for 360 d. Pressure significantly enhanced consolidation and microbial activity in treated FFT. Columns with pressure generated significantly more CH4(g) and CO2(g) and had significant increases in dissolved organic carbon and chemical oxygen demand in the FFT and water caps. The enhanced microbial activity in columns with pressure indicates that pressure increased the solubility of microbial substrates and metabolites in the tailings, thereby increasing the bioavailability of these compounds. Ammonium generation was significantly higher in columns with pressure, suggesting that microorganisms utilized polyacrylamide and/or N2 fixation as a nitrogen source to meet enhanced nutrient demands. Pressure also impacted microbial community structure, shifting methanogenic communities from hydrogenotrophic methanogens to predominately acetoclastic methanogens. This study also revealed the importance of sulfur cycling in treated FFT. Extensive sulfate reduction occurred in all columns, generating dissolved sulfides and H2S(g), and this was accelerated by hydrocarbon amendments.

Bioaugmentation protocols involving Methanobrevibacter thaueri and Pecoramyces ruminantium for investigating lignocellulose degradation and methane production from alfalfa stalks

Two protocols involving batch cultures were used to investigate the bioaugmentation of methane production by Pecoramyces ruminantium, and Methanobrevibacter thaueri. Protocol I examined the effect of altering the proportion of the microbial constituents in inoculum on alfalfa stalk fermentations and showed a 25 % improvement in dry matter loss in cultures where the inoculum contained just 30 % of co-culture and 70 % of fungal monoculture. Protocol II involved consecutive cultures and alternating inoculations. This protocol resulted in 17-22 mL/g DM methane production with co-cultures a 30 % increase in methane relative to the fungal monoculture. Both protocols indicate that the co-culture rapidly dominated and was more resilient than the monoculture. Synergistic interaction between fungus and methanogen, promoted more efficient lignocellulose degradation and higher methane yield. This study highlighted the potential of microbial co-cultures for enhancing methane production from lignocellulosic biomass, offering a promising bioaugmentation strategy for improving biogas yields and waste valorization.

Current status and future developments of assessing microbiome composition and dynamics in anaerobic digestion systems using metagenomic approaches

The metagenomic approach stands as a powerful technique for examining the composition of microbial communities and their involvement in various anaerobic digestion (AD) systems. Understanding the structure, function, and dynamics of microbial communities becomes pivotal for optimizing the biogas process, enhancing its stability and improving overall performance. Currently, taxonomic profiling of biogas-producing communities relies mainly on high-throughput 16S rRNA sequencing, offering insights into the bacterial and archaeal structures of AD assemblages and their correlations with fed substrates and process parameters. To delve even deeper, shotgun and genome-centric metagenomic approaches are employed to recover individual genomes from the metagenome. This provides a nuanced understanding of collective functionalities, interspecies interactions, and microbial associations with abiotic factors. The application of OMICs in AD systems holds the potential to revolutionize the field, leading to more efficient and sustainable waste management practices particularly through the implementation of precision anaerobic digestion systems. As ongoing research in this area progresses, anticipations are high for further exciting developments in the future. This review serves to explore the current landscape of metagenomic analyses, with focus on advancing our comprehension and critically evaluating biases and recommendations in the analysis of microbial communities in anaerobic digesters. Its objective is to explore how contemporary metagenomic approaches can be effectively applied to enhance our understanding and contribute to the refinement of the AD process. This marks a substantial stride towards achieving a more comprehensive understanding of anaerobic digestion systems.

Comparison of anaerobic digestion of starch- and petro-based bioplastic under hydrogen-rich conditions

To identify an economically viable waste management system for bioplastics, thermoplastic starch (TPS) and poly(butylene adipate-co-terephthalate) (PBAT) were anaerobically digested under hydrogen (H2)/carbon dioxide (CO2) and nitrogen (N2) gas-purged conditions to compare methane (CH4) production and biodegradation. Regardless of the type of bioplastics, CH4 production was consistently higher with H2/CO2 than with N2. The highest amount of CH4 was produced at 307.74 mL CH4/g volatile solids when TPS digested with H2/CO2. A stepwise increased in CH4 yield was observed, with a nominal initial increment followed by accelerated methanogenesis conversion as H2 was depleted. This may be attributed to a substantial shift in the microbial structure from hydrogenotrophic methanogen (Methanobacteriales and Methanomicrobiales) to heterotrophs (Spirochaetia). In contrast, no significant change was observed with PBAT, regardless of the type of purged gas. TPS was broken down into numerous derivatives, including volatile fatty acids. TPS produced more byproducts with H2/CO2 (i.e., 430) than with N2 (i.e., 320). In contrast, differential scanning calorimetry analysis on PBAT revealed an increase in crystallinity from 10.20 % to 12.31 % and 11.36 % in the H2/CO2- and N2-purged conditions, respectively, after 65 days of testing. PBAT surface modifications were characterized via Fourier transform infrared spectroscopy and scanning electron microscopy. The results suggest that the addition of H2/CO2 can enhance the CH4 yield and increase the breakdown rate of TPS more than that of PBAT. This study provides novel insights into the CH4 production potential of two bioplastics with different biodegradabilities in H2/CO2-mediated anaerobic digestion systems.

Anaerobic Co-digestion of sewage sludge and organic fraction of municipal solid waste: Focus on mix ratio optimization and synergistic effects

The utilization of municipal solid waste (MSW) and sewage sludge (SS) as a source of renewable energy is crucial in achieving sustainable and integrated MSW management. SS and organic fraction of municipal solid waste (OFMSW) can be anaerobically digested to produce methane for energy. However, anaerobic digestion of specific substrates is challenging with respect to substrate characteristics. The problem of mono-digestion can be mitigated by co-digestion of these two major organic wastes because of their complementary characteristics. Moreover, there is a lack of studies on optimization of different mix ratios of organic fraction of municipal solid waste (OFMSW) and sewage sludge (SS) based on total solids (TS). The study aims to optimize the mix ratio for anaerobic co-digestion of OFMSW and SS. The study further elucidates synergistic effects associated with the co-digestion process. Different mix ratios of SS and OFMSW (0:100, 20:80, 40:60, 60:40, 80:20, 100:0) at 5, 7.5 and 10% TS were assessed for biomethane potential assessment. The results showed that with an increase in SS in the mix ratio feed the methane yield increased by 91% and 50% as compared to mono digestion of sewage sludge and OFMSW respectively at TS 7.5%. Based on the kinetic analysis, it was observed that the lag phase reduced for 60:40 mix ratio leading to higher rate of biodegradation. Positive synergistic effects were observed for 40:60, 60:40 and 80:20 mix ratio of SS:OFMSW based on co-digestion impact factor value. Response surface modelling was used to get the optimized mix ratio and TS %. The optimum mix ratio with the highest methane yield (388 ml/gVS added) was 70:30 (SS: OFMSW) at TS 7.5% with a desirability value of 0.98. These findings demonstrate that co-digesting SS and OFMSW is a preferable alternative for harnessing renewable energy and managing organic waste in a sustainable manner.

Emerging Strategies for Enhancing Propionate Conversion in Anaerobic Digestion: A Review

Anaerobic digestion (AD) is a triple-benefit biotechnology for organic waste treatment, renewable production, and carbon emission reduction. In the process of anaerobic digestion, pH, temperature, organic load, ammonia nitrogen, VFAs, and other factors affect fermentation efficiency and stability. The balance between the generation and consumption of volatile fatty acids (VFAs) in the anaerobic digestion process is the key to stable AD operation. However, the accumulation of VFAs frequently occurs, especially propionate, because its oxidation has the highest Gibbs free energy when compared to other VFAs. In order to solve this problem, some strategies, including buffering addition, suspension of feeding, decreased organic loading rate, and so on, have been proposed. Emerging methods, such as bioaugmentation, supplementary trace elements, the addition of electronic receptors, conductive materials, and the degasification of dissolved hydrogen, have been recently researched, presenting promising results. But the efficacy of these methods still requires further studies and tests regarding full-scale application. The main objective of this paper is to provide a comprehensive review of the mechanisms of propionate generation, the metabolic pathways and the influencing factors during the AD process, and the recent literature regarding the experimental research related to the efficacy of various strategies for enhancing propionate biodegradation. In addition, the issues that must be addressed in the future and the focus of future research are identified, and the potential directions for future development are predicted.

Inhibitory mechanisms on dry anaerobic digestion: Ammonia, hydrogen and propionic acid relationship

Inhibitory pathways in dry anaerobic digestion are still understudied and current knowledge on wet processes cannot be easily transferred. This study forced instability in pilot-scale digesters by operating at short retention times (40 and 33 days) in order to understand inhibition pathways over long term operation (145 days). The first sign of inhibition at elevated total ammonia concentrations (8 g/l) was a headspace hydrogen level over the thermodynamic limit for propionic degradation, causing propionic accumulation. The combined inhibitory effect of propionic and ammonia accumulation resulted in further increased hydrogen partial pressures and n-butyric accumulation. The relative abundance of Methanosarcina increased while that of Methanoculleus decreased as digestion deteriorated. It was hypothesized that high ammonia, total solids and organic loading rate inhibited syntrophic acetate oxidisers, increasing their doubling time and resulting in its wash out, which in turn inhibited hydrogenotrophic methanogenesis and shifted the predominant methanogenic pathway towards acetoclastic methanogenesis at free ammonia over 1.5 g/l. C/N increases to 25 and 29 reduced inhibitors accumulation but did not avoid inhibition or the washout of syntrophic acetate oxidising bacteria.

Impact of innovative nanoadditives on biodigesters microbiome

Nanoparticles (NPs) supplementation to biodigesters improves the digestibility of biowaste and the generation of biogas. This study investigates the impact of innovative nanoadditives on the microbiome of biodigesters. Fresh cow manure was anaerobically incubated in a water bath under mesophilic conditions for 30 days. Three different NPs (zinc ferrite, zinc ferrite with 10% carbon nanotubes and zinc ferrite with 10% C76 fullerene) were separately supplemented to the biodigesters at the beginning of the incubation period. Methane and hydrogen production were monitored daily. Manure samples were collected from the digesters at different time points and the microbial communities inside the biodigesters were investigated via real-time PCR and 16 S rRNA gene amplicon-sequencing. The results indicate that zinc ferrite NPs enhanced biogas production the most. The microbial community was significantly affected by NPs addition in terms of archaeal and bacterial 16 S rRNAgene copy numbers. The three ZF formulations NPs augmented the abundance of members within the hydrogenotrophic methanogenic phyla Methanobacteriaceae. While Methanomassiliicoccacaea were enriched in ZF/C76 supplemented biodigester due to a significant increase in hydrogen partial pressure, probably caused by the enrichment of Spirochaetaceae (genus Treponema). Overall, NPs supplementation significantly enriched acetate-producing members within Hungateiclostridiaceae in ZF/CNTs, Dysgonomonadaceae in ZF and Spirochaetaceae ZF/C76 biodigesters.

Role of interspecies electron transfer stimulation in enhancing anaerobic digestion under ammonia stress: Mechanisms, advances, and perspectives

Ammonia stress is a commonly encountered issue in anaerobic digestion (AD) process when treating proteinaceous substrates. The enhanced relationship between syntrophic bacteria and methanogens triggered by interspecies electron transfer (IET) stimulation is one of the potential mechanisms for an improved methane yield from the AD plant under ammonia-stressed condition. There is, however, lack of synthesized information on the mechanistic understanding of IET facilitation in the ammonia-stressed AD processes. This review critically discusses recovery of AD system from ammonia-stressed condition, focusing on H₂ transfer, redox compound-mediated IET, and conductive material-induced direct IET. The effects and the associated mechanisms of IET stimulation on mitigating ammonia stress and promoting methanogenesis were elucidated. Finally, prospects and challenges of IET stimulation were critically discussed. This review highlights, for the first time, the critical role of IET stimulation in enhancing AD process under ammonia-stressed condition.

Banana Waste-to-Energy Valorization by Microbial Fuel Cell Coupled with Anaerobic Digestion

Banana is the most cultivated fruit plant in the world. It is produced in Latin America, Asia and Africa. India and China are the world’s largest banana producers, with almost 41% of the world’s production. This fruit reaches a total world production of 158.3 million tons per year. However, during their production cycle, the banana agroindustry produces large volumes of solid waste derived from overripe fruit. It contributes between 8–20 percent of the waste (around 100 kg of banana waste for every ton of banana produced). Therefore, the use of overripe banana waste represents a huge opportunity for bioenergy production. This work demonstrates that banana waste can be further used for power generation using a microbial fuel cell (MFC) coupled with anaerobic digestion (AD). First, the maximum methane production (MMP), methane production rate (MPR) and biochemical methane potential (BMP) were measured using an anaerobic batch bioreactor for 64 days of monitoring. Finally, the digestate generated from AD was used in the MFC to determine the polarization curve, maximum voltage, maximum power density (MPD), resistance and current. As a result, the AD generated an MMP of 320.3 mL, BMP of 373.3 mLCH4/gVS and MPR of 18.6 mLCH4/Lb⋅day. The MFC generated 286 mV (maximum voltage), 41.3 mW/m2 (MPD), 580.99 Ω (resistance) and 0.0002867 A (current). Both processes together produced a total bioenergy of 13.38 kJ/gVS. This coupled system showed a suitable and promising use of banana waste for ecofriendly bioenergy generation. Therefore, this feedstock could be taken advantage of for generating sustainable processes and developing a circular economy in the banana agroindustry.

Effectiveness of layered inoculation in solid-state anaerobic co-digestion of pig manure and corn straw: Focus on macro-, micro-, and genetic-levels

Layered inoculation can achieve rapid start-up and promote methanation performance of anaerobic digesters. Daily specific methane yield (SMY) rapidly increased to 2.93 mL/g VS/d during 0-13 days, and cumulative SMY reached 212 mL/g VS in the solid-state anaerobic co-digestion (SS-AcoD) of pig manure and corn straw. Data were collected at macro-, micro-, and genetic-levels of each substrate layer. The results showed that layered inoculation could improve volatile fatty acids utilization and prevent adverse effects of high total ammonium nitrogen concentrations. Layered inoculation accelerated hydrolysis, acidification, and methanogenesis of substrates, as evidenced by the efficient inoculation of Bacteroidetes, Anaerolineales, Methanosphaerula, and Methanothrix, which were primarily from inocula. The various stages of SS-AcoD were synergistically initiated during the first 13 days, and acetoclastic pathway was boosted. These results further explain why layered inoculation is an efficient method for improving methanation performance of SS-AcoD and achieving efficient utilization of organic solid waste.

Novel strategies towards efficient molecular biohydrogen production by dark fermentative mechanism: present progress and future perspective

In the scenario of alarming increase in greenhouse and toxic gas emissions from the burning of conventional fuels, it is high time that the population drifts towards alternative fuel usage to obviate pollution. Hydrogen is an environment-friendly biofuel with high energy content. Several production methods exist to produce hydrogen, but the least energy intensive processes are the fermentative biohydrogen techniques. Dark fermentative biohydrogen production (DFBHP) is a value-added, less energy-consuming process to generate biohydrogen. In this process, biohydrogen can be produced from sugars as well as complex substrates that are generally considered as organic waste. Yet, the process is constrained by many factors such as low hydrogen yield, incomplete conversion of substrates, accumulation of volatile fatty acids which lead to the drop of the system pH resulting in hindered growth and hydrogen production by the bacteria. To circumvent these drawbacks, researchers have come up with several strategies that improve the yield of DFBHP process. These strategies can be classified as preliminary methodologies concerned with the process optimization and the latter that deals with pretreatment of substrate and seed sludge, bioaugmentation, co-culture of bacteria, supplementation of additives, bioreactor design considerations, metabolic engineering, nanotechnology, immobilization of bacteria, etc. This review sums up some of the improvement techniques that profoundly enhance the biohydrogen productivity in a DFBHP process.

Functional and phylogenetic analyses of camel rumen microbiota associated with different lignocellulosic substrates

Rumen microbiota facilitates nutrition through digestion of recalcitrant lignocellulosic substrates into energy-accessible nutrients and essential metabolites. Despite the high similarity in rumen microbiome structure, there might be distinct functional capabilities that enable different ruminant species to thrive on various lignocellulosic substrates as feed. Here, we applied genome-centric metagenomics to explore phylogenetic diversity, lignocellulose-degrading potential and fermentation metabolism of biofilm-forming microbiota colonizing 11 different plant substrates in the camel rumen. Diversity analysis revealed significant variations in the community of rumen microbiota colonizing different substrates in accordance with their varied physicochemical properties. Metagenome reconstruction recovered genome sequences of 590 bacterial isolates and one archaeal lineage belonging to 20 microbial phyla. A comparison to publicly available reference genomes and rumen metagenome-assembled genomes revealed that most isolates belonged to new species with no well-characterized representatives. We found that certain low abundant taxa, including members of Verrucomicrobiota, Planctomycetota and Fibrobacterota, possessed a disproportionately large number of carbohydrate active enzymes per Mb of genome, implying their high metabolic potential to contribute to the rumen function. In conclusion, we provided a detailed picture of the diversity and functional significance of rumen microbiota colonizing feeds of varying lignocellulose composition in the camel rumen. A detailed analysis of 591 metagenome-assembled genomes revealed a network of interconnected microbiota and highlighted the key roles of certain taxonomic clades in rumen function, including those with minimal genomes (e.g., Patescibacteria). The existence of a diverse array of gene clusters encoding for secondary metabolites unveiled the specific functions of these biomolecules in shaping community structure of rumen microbiota.

Effect of pH on the performance of hydrogen production by dark fermentation coupled denitrification

High concentration nitrogen-containing organic wastewater is a potential substrate for hydrogen production by dark fermentation. In this study, the effect of initial pH on the performance of hydrogen production by dark fermentation coupled denitrification was investigated. The hydrogen production, liquid metabolites, nitrate, nitrite and microbial community were monitored under the condition of pH varying from 4 to 11. Results showed that the highest hydrogen production (70.94 ± 4.750 mL/g VSS), chemical oxygen demand (COD) removal rate (37.13 ± 1.86%) and nitrate reduction rate (1.57 ± 0.27 mg/L/h) were obtained at pH of 5. Under this condition, the nitrate was mainly reduced to N₂ with hydrogen as the electron donor. When the initial pH was 6-11, nitrate mainly reduced to N₂ through co-action with acetate. Microbial community analysis revealed that as the initial pH increased from 4 to 11, the main hydrogen-producing microorganisms were gradually converted from Clostridium sensu stricto 12 sp. into Clostridium sensu stricto 1 sp, which leaded to changes in the hydrogen production process.

Breakthrough in hydrolysis of waste biomass by physico-chemical pretreatment processes for efficient anaerobic digestion

Anaerobic digestion (AD) is the most comprehended process to stabilise the waste biomass efficiently and to obtain bioenergy. The AD starts with the hydrolysis process, where the major liability is the action of inhibitors during the hydrolysis process. The biomass pretreatment preceding anaerobic digestion is obligatory to improve feedstock biodegradability for enhanced biogas generation. It can be prevailed by the application of various pretreatment processes. This review explains the major inhibiting compounds and their formation during hydrolysis that affect the efficiency of anaerobic digestion and the benefits of the physico-chemical pretreatment (PCP) method for enhancing hydrolysis in the digestion of waste biomass. The synergistic effect of PCP on macromolecular release, liquefaction and biodegradability were presented. The feasibility of the pretreatment process was evaluated in terms of energy and cost assessment for pilot scale implementation. The outcome of this review reveals that the physico-chemical process is one of the best pretreatment methods to enhance anaerobic digestion by optimising various parameters and increasing the solubilization by about 90%. The thermochemical pretreatment at lower temperature (<100) increases the net energy yield. The solubilization of waste biomass in terms of macromolecular release and liquefaction cannot describe the pretreatment potential. The effectiveness of pretreatment was evaluated by the substrate pre-treatment followed by anaerobic digestibility of pretreated substrate.

Overview of pretreatment technologies on vegetable, fruit and flower market wastes disintegration and bioenergy potential: Indian scenario

Disposal of segregated organic fractions of centralized wholesale market wastes (i.e. vegetable, fruit and flower markets waste) in dumpsites/landfills are not only a serious issue but also underutilizes the huge potency of these organic wastes. Anaerobic digestion (AD) is a promising technology for converting organic wastes into methane, as a carbon-neutral alternative to conventional fuels. The major challenges related to the AD process are poor biodegradation of wastes and buffering capacity within the anaerobic digester that lowers the biogas yield. To accelerate biodegradation and to enhance the process efficacy of anaerobic digestion, several pretreatment technologies (mechanical, thermal, biological, chemical and combined pre-treatments) for organic wastes prior to the AD process were developed. This review article presents a comprehensive analysis of research updates in pretreatment techniques for vegetable, fruit and flower markets wastes for enhancing biogas yields during the AD process. The technological aspects of the pretreatment process are described and their efficiency comparison with the resultant process yields and environmental benefits are also discussed. The challenges and technical issues associated with each pretreatment and future research directions for overcoming the field implementation issues are also proposed.

Microbial community redundance in biomethanation systems lead to faster recovery of methane production rates after starvation

The Power-to-Gas concept corresponds to the use of the electric energy surplus to produce H₂ by water electrolysis, that can be further converted to methane by biomethanation. However, the fluctuant production of renewable energy sources can lead to discontinuous H₂ injections into the reactors, that may interfere with the adaptation of the microbial community to high H₂ partial pressures. In this study, the response of the microbial community to H₂ and organic feed starvation was evaluated in in-situ and ex-situ biomethanation. The fed-batch reactors were fed with acetate or glucose and H₂, and one or four weeks of starvation periods were investigated. Methane productivity was mostly affected by the four-week starvation period. However, both in-situ and ex-situ biomethanation reactors recovered their methane production rate after starvation within approximately one-week of normal operation, while the anaerobic digestion (AD) reactors did not recover their performances even after 3 weeks of normal operation. The recovery failure of the AD reactors was probably related to a slow growth of the syntrophic and methanogen microorganisms, that led to a VFA accumulation. On the contrary, the faster recovery of both biomethanation reactors was related to the replacement of Methanoculleus sp. by Methanobacterium sp., restoring the methane production in the in-situ and ex-situ biomethanation reactors. This study has shown that biomethanation processes can respond favourably to the intermittent H₂ addition without compromising their CH₄ production performance.

Promotion of direct interspecies electron transfer and potential impact of conductive materials in anaerobic digestion and its downstream processing - a critical review

Addition of conductive materials (CMs) has been reported to facilitate direct interspecies electron transfer (DIET) and improved anaerobic digestion (AD) performance. This review summarises the benefits and outlines remaining research challenges of the addition of CMs with a focus on the downstream processing of AD. CM addition may alter biogas quality, digestate dewaterability, biosolids volume, and centrate quality. Better biogas quality has been observed due to the adsorption of H₂S to metallic CMs. The addition of CMs results in an increase in solid content of the digestate and thus an additional requirement for sludge dewatering and handling and the final biosolids volume for disposal. This review highlights the need for more research at pilot scale to validate the benefits of CM addition and to evaluate CM selection, doses, material costs, and the impact on downstream processes. The lack of research on the impact of CMs on the downstream process of AD is highlighted.

In-situ biogas upgrading by bio-methanation with an innovative membrane bioreactor combining sludge filtration and H2 injection

A bioreactor using membrane technologies was used to demonstrate the feasibility of in-situ bio-methanation coupled to industrial wastewater treatment for biogas upgrading. High biogas productivity (1.7 Nm³_Biogas/m³_Bioreactor/day) with high CH₄ content (97.9%) was reached. In-situ bio-methanation did not affect the COD removal efficiency of anerobic digestion (>94%). Process resilience has been tested for both substrate overload and H₂ intermittence injection. Recovery of high CH₄ content after 7 days without H₂ injection occurred within few hours. Influence of microbial community has been studied showing that both hydrogenotrophic and homoacetogenic-acetoclastic pathways were involved.

The rumen microbiome: balancing food security and environmental impacts

Ruminants produce edible products and contribute to food security. They house a complex rumen microbial community that enables the host to digest their plant feed through microbial-mediated fermentation. However, the rumen microbiome is also responsible for the production of one of the most potent greenhouse gases, methane, and contributes about 18% of its total anthropogenic emissions. Conventional methods to lower methane production by ruminants have proved successful, but to a limited and often temporary extent. An increased understanding of the host-microbiome interactions has led to the development of new mitigation strategies. In this Review we describe the composition, ecology and metabolism of the rumen microbiome, and the impact on host physiology and the environment. We also discuss the most pertinent methane mitigation strategies that emerged to balance food security and environmental impacts.

Biological methanation of injected hydrogen in a two-stage anaerobic digestion process

In the field of biological hydrogen methanation, ideal process parameters are underexplored for continuous two-stage systems with anaerobic filters. The present study aims at filling this gap for continuous in-situ reactors while applying different hydrogen injection rates. The results of the study demonstrate an almost complete acid degradation on the output side of the anaerobic filter fed by hydrolysate from maize silage and silage effluent. Most of the oxidizable substances were transferred to methane, but hydrogen could not be completely converted. With fully stoichiometric hydrogen addition, a methane production rate of 0.88 ± 0.06 m³d^-1 per m³ reactor volume was reached. With half stoichiometric hydrogen addition, a hydrogen conversion rate of 75.53 ± 3.77% was obtained. The present approach proved to be a promising contribution to power-to-gas technology, as a considerable amount of hydrogen had to be converted into methane while carbon dioxide was fixed.

On-site CO2 bio-sequestration in anaerobic digestion: Current status and prospects

The advantages of anaerobic digestion (AD) technology in organic solid waste treatment for bioenergy recovery are evidenced in worldwide. Recently, more attention has been paid to on-site biogas research, as well as biogenic CO₂ sequestration from AD plant, to promote "carbon neutral". Single-phase and two-phase AD system can be incorporated with various CO₂ bioconversion technologies through H₂ mediated CO₂ bioconversion (in-situ and ex-situ biogas upgrading), or other emerging strategies for CO₂ fixation without exogenous H₂ injection; these include in-situ direct interspecies electron transfer reinforcement, electromethanogenesis, and off-gas reutilization. The existing and potential scenarios for on-site CO₂ bio-sequestration within the AD framework are reviewed from the perspectives of metabolic pathways, functional microorganisms, the limitations on reaction kinetics. This review concluded that on-site CO₂ bio-sequestration is a promising solution to reduce greenhouse gas emissions and increase renewable energy recovery.

Solid-state anaerobic co-digestion of organic fraction of municipal waste and sawdust: impact of co-digestion ratio, inoculum-to-substrate ratio, and total solids

Municipal solid waste contains mainly organic wastes that can be a good source for anaerobic digestion. Solid-state anaerobic digestion is an affordable and suitable technique to mitigate the organic fraction of municipal solid waste (OFMSW). However, as the organic loading of OFMSW is high, co-digestion with other materials can improve the system's performance. This study aimed to investigate the performance of the co-digestion of OFMSW and sawdust and study the parameters affecting its performance. Based on the experiments, the optimum sawdust/OFMSW ratio was achieved 1:2 with the methane production of 0.3 L/g VS. In addition, the inoculum-to-substrate ration (I/S) was investigated at 1:4, 1:2, 1:1, 2:1 ratios. The best result was obtained at 2:1 ratio with a total methane yield of 0.28 L/g VS. The results also indicated that I/S ratios less than 1:1 led to fatty acid accumulation and acidic pH condition. The effect of total solids content on the co-digestion process was also examined in this study. According to the results, as the total solids increased, the biomethane yield decreased while the biogas content increased.

The Anaerobic Fungi: Challenges and Opportunities for Industrial Lignocellulosic Biofuel Production

Lignocellulose is a promising feedstock for biofuel production as a renewable, carbohydrate-rich and globally abundant source of biomass. However, challenges faced include environmental and/or financial costs associated with typical lignocellulose pretreatments needed to overcome the natural recalcitrance of the material before conversion to biofuel. Anaerobic fungi are a group of underexplored microorganisms belonging to the early diverging phylum Neocallimastigomycota and are native to the intricately evolved digestive system of mammalian herbivores. Anaerobic fungi have promising potential for application in biofuel production processes due to the combination of their highly effective ability to hydrolyse lignocellulose and capability to convert this substrate to H2 and ethanol. Furthermore, they can produce volatile fatty acid precursors for subsequent biological conversion to H2 or CH4 by other microorganisms. The complex biological characteristics of their natural habitat are described, and these features are contextualised towards the development of suitable industrial systems for in vitro growth. Moreover, progress towards achieving that goal is reviewed in terms of process and genetic engineering. In addition, emerging opportunities are presented for the use of anaerobic fungi for lignocellulose pretreatment; dark fermentation; bioethanol production; and the potential for integration with methanogenesis, microbial electrolysis cells and photofermentation.

Coupling granular activated carbon and exogenous hydrogen to enhance anaerobic digestion of phenol via predominant syntrophic acetate oxidation and hydrogenotrophic methanogenesis pathway

Anaerobic digestion is a promising biological method for treating phenol-containing wastewater. However, the low methane yield of phenol due to the biological toxicity limits its potential application. This study presents a novel method to enhance the conversion rate of phenol to methane by coupling of granular activated carbon and exogenous hydrogen (GAC/H₂). The cumulative methane production in the GAC/H₂, H₂, GAC, and control groups were 408.2 ± 16.2, 336.5 ± 5.7, 287.2 ± 26. 2, and 258.1 ± 8.6 mL‬ CH₄/g COD, respectively. Compared with the control group, the hydrogenotrophic methanogenic activity and electron transfer activity of GAC/H₂ group were increased by 403.9 and 367.4%, respectively. The results of the 16SrRNA analysis indicated GAC enhanced the relative abundances of Syntrophus and Syntrophorhabdus, and hydrogen promoted the relative abundances of Cryptanaerobacter, Aminicenantes, and Methanobacterium. Therefore, the coupling of GAC and exogenous hydrogen promoted a dominate SAO-HM pathway to convert phenol to methane.

Integration of Artificial Intelligence into Biogas Plant Operation

In the biogas plants, organic material is converted to biogas under anaerobic conditions through physical and biochemical processes. From supply of the raw material to the arrival of the products to customers, there are serial processes which should be sufficiently monitored for optimizing the efficiency of the whole process. In particular, the anaerobic digestion process, which consists of sequential complex biological reactions, requires improved monitoring to prevent inhibition. Conventional implemented methods at the biogas plants are not adequate for monitoring the operational parameters and finding the correlation between them. As Artificial Intelligence has been integrated in different areas of life, the integration of it into the biogas production process will be inevitable for the future of the biogas plant operation. This review paper first examines the need for monitoring at the biogas plants with giving details about the process and process monitoring as well. In the following sections, the current situation of implementations of Artificial Intelligence in the biogas plant operation and in the similar industries will be represented. Moreover, considering that all the information gathered from literature and operational needs, an implementation model will be presented.

Influence of electrostatic field and conductive material on the direct interspecies electron transfer for methane production

The influence of electrostatic field on the direct interspecies electron transfer (DIET) pathways for methane production was investigated in a batch bioelectrochemical anaerobic digester (BEAD). The ultimate methane production and methane yield in the BEAD reactor saturated to 925 ± 29 mL/L and 309.9 ± 9.6 mL CH₄/g COD, respectively, which were much higher than 616 ± 3 mL/L and 205.4 ± 205.4 mL CH₄/g COD in the anaerobic digester (AD). In the cyclic voltammogram (CV) for bulk solution, the oxidation peak current was 0.52 mA in the BEAD reactor, which was higher than 0.24 mA of AD reactor. This shows that the oxidizing ability of microorganisms was greatly improved in the BEAD reactor. Anaerolineaceae, a well-known electroactive bacterial family, was well enriched in the BEAD reactor. It indicates that the electrostatic field can enrich the electroactive bacteria and activate the DIET pathways for methane production. Moreover, the conductive material (activated carbon) further improved the performance of BEAD reactor, implies that the conductivities of bulk solution is one of the important parameters for the DIET pathways.

Biomethanation processes: new insights on the effect of a high H2 partial pressure on microbial communities

BACKGROUND

Biomethanation is a promising solution to upgrade the CH₄ content in biogas. This process consists in the injection of H₂ into an anaerobic digester, using the capacity of indigenous hydrogenotrophic methanogens for converting the injected H₂ and the CO₂ generated from the anaerobic digestion process into CH₄. However, the injection of H₂ could cause process disturbances by impacting the microbial communities of the anaerobic digester. Better understanding on how the indigenous microbial community can adapt to high H₂ partial pressures is therefore required.

RESULTS

Seven microbial inocula issued from industrial bioprocesses treating different types of waste were exposed to a high H₂ partial pressure in semi-continuous reactors. After 12 days of operation, even though both CH₄ and volatile fatty acids (VFA) were produced as end products, one of them was the main product. Acetate was the most abundant VFA, representing up to 94% of the total VFA production. VFA accumulation strongly anti-correlated with CH₄ production according to the source of inoculum. Three clusters of inocula were distinguished: (1) inocula leading to CH₄ production, (2) inocula leading to the production of methane and VFA in a low proportion, and (3) inocula leading to the accumulation of mostly VFA, mainly acetate. Interestingly, VFA accumulation was highly correlated to a low proportion of archaea in the inocula, a higher amount of homoacetogens than hydrogenotrophic methanogens and, the absence or the very low abundance in members from the Methanosarcinales order. The best methanogenic performances were obtained when hydrogenotrophic methanogens and Methanosarcina sp. co-dominated all along the operation.

CONCLUSIONS

New insights on the microbial community response to high H₂ partial pressure are provided in this work. H₂ injection in semi-continuous reactors showed a significant impact on microbial communities and their associated metabolic patterns. Hydrogenotrophic methanogens, Methanobacterium sp. or Methanoculleus sp. were highly selected in the reactors, but the presence of co-dominant Methanosarcinales related species were required to produce higher amounts of CH₄ than VFA.

Eco-compatible biochar mitigates volatile fatty acids stress in high load thermophilic solid-state anaerobic reactors treating agricultural waste

A high concentration of accumulated volatile fatty acids (VFAs) is one of the most important factors resulting in reactor failure during solid-state anaerobic digestion. In this study, the feedstock-to-inoculum (F/I) ratio (0.5, 2, 3, 4 and 6) and the recovery method after failure (biochar addition or inoculum addition) were investigated in batch solid-state anaerobic digestion fed with rice straw and pig urine. An F/I ratio of 3 was the threshold for stable operation, while the reactors failed at F/I ratios of 4 and 6 because of high accumulated VFAs concentrations (above 30 g HAc/kg). Biochar addition (10% or 20% (wet weight) of the mixture) was as effective as inoculum addition (by adjusting the F/I ratio to 2 or 3) in promoting VFAs degradation in failed reactors within a short period (<1 day). The buffering capacity of biochar was important in promoting VFAs degradation.

Enhanced Anaerobic Digestion by Stimulating DIET Reaction

Since the observation of direct interspecies electron transfer (DIET) in anaerobic mixed cultures in 2010s, the topic “DIET-stimulation” has been the main route to enhance the performance of anaerobic digestion (AD) under harsh conditions, such as high organic loading rate (OLR) and the toxicants’ presence. In this review article, we tried to answer three main questions: (i) What are the merits and strategies for DIET stimulation? (ii) What are the consequences of stimulation? (iii) What is the mechanism of action behind the impact of this stimulation? Therefore, we introduced DIET history and recent relevant findings with a focus on the theoretical advantages. Then, we reviewed the most recent articles by categorizing how DIET reaction was stimulated by adding conductive material (CM) and/or applying external voltage (EV). The emphasis was made on the enhanced performance (yield and/or production rate), CM type, applied EV, and mechanism of action for each stimulation strategy. In addition, we explained DIET-caused changes in microbial community structure. Finally, future perspectives and practical limitations/chances were explored in detail. We expect this review article will provide a better understanding for DIET pathway in AD and encourage further research development in a right direction.

Influences of Temperature and Substrate Particle Content on Granular Sludge Bed Anaerobic Digestion

Influences of temperature (25–35 °C) and substrate particulate content (3.0–9.4 g total suspended solids (TSS)/L) on granular sludge bed anaerobic digestion (AD) were analyzed in lab-scale reactors using manure as a substrate and through modeling. Two particle levels were tested using raw (RF) and centrifuged (CF) swine manure slurries, fed into a 1.3-L lab-scale up-flow anaerobic sludge bed reactor (UASB) at temperatures of 25 °C and 35 °C. Biogas production increased with temperature in both high- and low-particle-content substrates; however, the temperature effect was stronger on high-particle-content substrate. RF and CF produced a comparable amount of biogas at 25 °C, suggesting that biogas at this temperature came mainly from the digestion of small particles and soluble components present in similar quantities in both substrates. At 35 °C, RF showed significantly higher biogas production than CF, which was attributed to increased (temperature-dependent) disintegration of larger solid particulates. Anaerobic Digestion Model No.1 (ADM1) based modeling was carried out by separating particulates into fast and slow disintegrating fractions and introducing temperature-dependent disintegration constants. Simulations gave a better fit for the experimental data than the conventional ADM1 model.

Islands in the stream: from individual to communal fiber degradation in the rumen ecosystem

The herbivore rumen ecosystem constitutes an extremely efficient degradation machinery for the intricate chemical structure of fiber biomass, thus, enabling the hosting animal to digest its feed. The challenging task of deconstructing and metabolizing fiber is performed by microorganisms inhabiting the rumen. Since most of the ingested feed is comprised of plant fiber, these fiber-degrading microorganisms are of cardinal importance to the ecology of the rumen microbial community and to the hosting animal, and have a great impact on our environment and food sustainability. We summarize herein the enzymological fundamentals of fiber degradation, how the genes encoding these enzymes are spread across fiber-degrading microbes, and these microbes' interactions with other members of the rumen microbial community and potential effect on community structure. An understanding of these concepts has applied value for agriculture and our environment, and will also contribute to a better understanding of microbial ecology and evolution in anaerobic ecosystems.

Efficient resource valorization by co-digestion of food and vegetable waste using three stage integrated bioprocess

During two-stage (Acidogenesis-Methanogenesis) process, solid organics and gaseous by-products are usually left unused. To increase resource recovery efficiency, a three stage process (Hydrolysis/Acidogenesis-Methanogenesis-Composting) was designed. Initially, co-digestion of food waste (FW) and vegetable waste (VW) was carried out in Leach Bed Reactor (LBR) for hydrolysis and acidogenesis, followed by airlift reactor (ALR) for methanogenesis for 21 days using two different feed stocks [2:3 FW:VW~FVW; FW alone]. Off gas from LBR was diverted to ALR to enhance methane recovery. Results depicted that volatile fatty acids (VFA) and biohydrogen production was more for FW fed system, while methane production was higher in FVW fed system. Three different functional zones in three separate chambers significantly accelerated organic removal rate while gas diversion increased overall methane recovery. In third stage, residual solid organic matter from LBR was subjected to aerobic composting and compost with N (%): 2.90 & 2.76; C/N ratio: 18.2 & 20.8 for FVW and FW was recovered. The three-stage process has advantages of zero waste generation and overall process stability, accounting for resource efficient circular loop.

Solid-State Anaerobic Digestion for Waste Management and Biogas Production

Solid-state anaerobic digestion (SS-AD) is commonly used to treat feedstocks with high solid content such as municipal solid waste and lignocellulosic biomass. Compared to liquid state anaerobic digestion (LS-AD), SS-AD has multiple advantages including high organic loading, minimal digestate generated, and low energy requirement for heating. However, the main disadvantages limiting the efficiency of SS-AD are long solid retention time, incomplete mixing, and an accumulation of inhibitors. For a successful and efficient SS-AD, it is important to control operation parameters such as nutrient levels, C/N ratio, feedstock-to-inoculum ratio, pH, temperature, and mixing. Biogas production in SS-AD performance can be enhanced by feedstock pretreatment, co-digestion, and supplement of additives such as biochar. The aim of this chapter is to provide a comprehensive summary of the current development in SS-AD as an effective way for treating solid waste materials. Graphical Abstract.

Reversibility of hydrolysis inhibition at high hydrogen partial pressure in dry anaerobic digestion processes fed with wheat straw and inoculated with anaerobic granular sludge

In dry anaerobic digestion (AD), methanogenic performances are lowered by high solid contents. Low performances are often caused by a decrease of the gas-liquid transfer kinetics leading to local accumulation of inhibitory by-products. Hydrogen was previously identified as an inhibitor of hydrolytic and acetogenic microbial activities in dry AD. CO₂ is also generated but its impact on the microbial activity remains unknown. In this study, the reversibility of dry AD inhibition at high H₂ partial pressure (P_H2 of 1 bar) was investigated by adding CO₂ (400 mbars) after 11 and 18 days of methanogenesis inhibition, in an AD process operated at 25% TS, using wheat straw as substrate and inoculated with anaerobic granular sludge. As soon as CO₂ was added, the methanogenic activity rapidly recovered within 3 days, from 0.41 ± 0.1 to 3.77 ± 0.8 and then 2.25 ± 0.3, likely through the hydrogenotrophic pathway followed by the acetoclastic pathway, respectively. This result was confirmed by the high abundance of Methanomicrobiales (83%) and the emergence of Methanosarcinales sp (up to 17%) within the methanogenic community. Furthermore, the recovery kinetics were impacted by the duration of the inhibition period suggesting a different impact of the high P_H2 on hydrogenotrophic and acetoclastic methanogens.

Modeling the anaerobic co-digestion of solid waste: From batch to semi-continuous simulation

The main purpose of this study was to validate the use of a simple model for forecasting methane production in co-digestion reactors run semi-continuously using substrate data acquired in batch mode. Firstly, seven solid substrates were characterized individually in successive batches to assess their Biochemical Methane Potential (BMP) and kinetic parameters. Afterwards, eight mixtures of two, three or five substrates were processed in semi-continuous mode at an organic loading rate of 1 g VS L^-1 d^-1. The experimental methane production was always greater than that calculated from the BMP of each substrate. This result suggested that, endogenous activity needs to be taken into consideration in order to predict total methane production accurately. Near equivalence between experimental and modeled methane production was found after integration in the model of the endogenous activity. The results confirmed the possibility for use of substrate batch data (BMP and kinetics) to predict methane production in semi-continuous operations.

Process Disturbances in Agricultural Biogas Production—Causes, Mechanisms and Effects on the Biogas Microbiome: A Review

Disturbances of the anaerobic digestion process reduce the economic and environmental performance of biogas systems. A better understanding of the highly complex process is of crucial importance in order to avoid disturbances. This review defines process disturbances as significant changes in the functionality within the microbial community leading to unacceptable and severe decreases in biogas production and requiring an active counteraction to be overcome. The main types of process disturbances in agricultural biogas production are classified as unfavorable process temperatures, fluctuations in the availability of macro- and micronutrients (feedstock variability), overload of the microbial degradation potential, process-related accumulation of inhibiting metabolites such as hydrogen (H2), ammonium/ammonia (NH4+/NH3) or hydrogen sulphide (H2S) and inhibition by other organic and inorganic toxicants. Causes, mechanisms and effects on the biogas microbiome are discussed. The need for a knowledge-based microbiome management to ensure a stable and efficient production of biogas with low susceptibility to disturbances is derived and an outlook on potential future process monitoring and control by means of microbial indicators is provided.

The auto fluorescence characteristics, specific activity, and microbial community structure in batch tests of mono-chicken manure digestion

Batch tests inoculated with granular and suspended sludge of mono chicken manure (CM) digestion were conducted. Kinetic analysis showed a maximum bio-CH₄ generation (6 mL/gVS/d) at an optimal TS of 10-12%. At a TS of 25%, serious inhibition was found for granular sludge and even greater inhibition for the suspended sludge caused by free ammonia. The auto fluorescence of Excitation-mission matrix with parallel factor analysis (PARAFAC) showed that the dissolved organic matter (DOM) varied between the form C1, C2, C3 and C4. The split component of the SMP-like C2 and protein-like C4 significantly related to the bio-methane production in time series. The canonical correlation analysis (CCA) indicated that ammonia, pH, and TS influenced the PARAFAC component significantly. The aceticlastic methanogens of the genus Methanosaeta and acetogens of the genus Syntrophobacter predominated in the CM sludge. The methanogens and acetogens formed a metabolic cooperation, making the process a stable methane produced activity.

An overview of microbial biogas enrichment

Biogas upgrading technologies have received widespread attention recently and are researched extensively. Microbial biogas upgrading (biomethanation) relies on the microbial performance in enriched H₂ and CO₂ environments. In this review, recent developments and applications of CH₄ enrichment in microbial methanation processes are systematically reviewed. During biological methanation, either H₂ can be injected directly inside the anaerobic digester to enrich CH₄ by a consortium of mixed microbial species or H₂ can be injected into a separate bioreactor, where CO₂ contained in biogas is coupled with H₂ and converted to CH₄, or a combination hereof. The available microbial technologies based on hydrogen-mediated CH₄ enrichment, in particular ex-situ, in-situ and bioelectrochemical, are compared and discussed. Moreover, gas-liquid mass transfer limitations, and dynamics of bacteria-archaea interactions shift after H₂ injection are thoroughly discussed. Finally, the summary of existing demonstration, pilot plants and commercial CH₄ enrichment plants based on microbial biomethanation are critically reviewed.

Lime Pretreatment of Miscanthus: Impact on BMP and Batch Dry Co-Digestion with Cattle Manure

In Europe, the agricultural biogas sector is currently undergoing fast developments, and cattle manure constitutes an important feedstock. Batch dry digester processes with leachate recirculation prove to be particularly interesting for small-scale plants. However, their startup being relatively slow, the process could be facilitated by co-digestion with energy crops. In this study, Miscanthus xgiganteus was chosen for its high biomass yields and low input requirements. The carbohydrate accessibility of this lignocellulosic biomass is limited but may be improved with alkali pretreatment. The efficiency of lime (CaO) pretreatment with low water addition on the biochemical methane potential (BMP) of miscanthus was investigated through two experimental designs (CaO concentrations ranged between 2.5 and 17.5% and pretreatment lasted 1, 3, or 5 days). The pretreated miscanthus was then co-digested with cattle manure in dry leach bed reactors. CaO pretreatments led to a 14–37% improvement of miscanthus BMP, and a 67–227% increase in the first-order kinetics constant; a high contact time was shown to favor methane production. According to these results and to industrial requirements, miscanthus was pretreated with 5 and 10% CaO for 5 days, then co-digested with manure in dry leach bed reactors. Nevertheless, the promising results of the BMP tests were not validated. This could be related to the high water absorption capacity of miscanthus.

The hydrolytic stage in high solids temperature phased anaerobic digestion improves the downstream methane production rate

The role of the hydrolytic stage in high solids temperature phased anaerobic digestion was investigated with a mixture of cattle slurry and maize silage with variable ratios (100, 70 and 30% volatile solids coming from cattle slurry). It was incubated for 48 h at 37, 55, 65 and 72 °C. Soluble chemical oxygen demand and biochemical methane potential were measured at 0, 24 and 48 h. Higher temperatures improved the amount of solubilized COD, which confirmed previously reported results. Nevertheless, solubilization mostly took place during the first 24 h. The rate of methane production in post-hydrolysis BMPs increased after 48 h hydrolysis time, but not after 24 h. The first order kinetic constant rose by 40% on average. No correlation was observed between soluble COD and downstream methane production rate, indicating a possible modification of the physical structure of the particulate solids during the hydrolytic stage.

Methanosarcina plays a main role during methanogenesis of high-solids food waste and cardboard

Anaerobic digestion of food waste is a complex process often hindered by high concentrations of volatile fatty acids and ammonia. Methanogenic archaea are more sensitive to these inhibitors than bacteria and thus the structure of their community is critical to avoid reactor acidification. In this study, the performances of three different inocula were compared using batch digestion tests of food waste and cardboard mixtures. Particular attention was paid to the archaeal communities in the inocula and after digestion. While the tests started with inocula rich in Methanosarcina led to efficient methane production, VFAs accumulated in the reactors where inocula initially were poor in this archaea and no methane was produced. In addition, higher substrate loads were tolerated when greater proportions of Methanosarcina were initially present in the inoculum. Independently of the inoculum origin, Methanosarcina were the dominant methanogens in the digestates from the experiments that efficiently produced methane. These results suggest that the initial archaeal composition of the inoculum is crucial during reactor start-up to achieve stable anaerobic digestion at high concentrations of ammonia and organic acids.

Co-digestion of solid waste: Towards a simple model to predict methane production

Modeling methane production is a key issue for solid waste co-digestion. Here, the effect of a step-wise increase in the organic loading rate (OLR) on reactor performance was investigated, and four new models were evaluated to predict methane yields using data acquired in batch mode. Four co-digestion experiments of mixtures of 2 solid substrates were conducted in semi-continuous mode. Experimental methane yields were always higher than the BMP values of mixtures calculated from the BMP of each substrate, highlighting the importance of endogenous production (methane produced from auto-degradation of microbial community and generated solids). The experimental methane productions under increasing OLRs corresponded well to the modeled data using the model with constant endogenous production and kinetics identified at 80% from total batch time. This model provides a simple and useful tool for technical design consultancies and plant operators to optimize the co-digestion and the choice of the OLRs.

Effect of total solids content on biohydrogen production and lactic acid accumulation during dark fermentation of organic waste biomass

Production of biohydrogen and related metabolic by-products was investigated in Solid State Dark Fermentation (SSDF) of food waste (FW) and wheat straw (WS). The effect of the total solids (TS) content and H₂ partial pressure (pp_H2), two of the main operating factors of SSDF, were investigated. Batch tests with FW at 10, 15, 20, 25 and 30% TS showed considerable effects of the TS on metabolites distribution. H₂ production was strongly inhibited for TS contents higher than 15% with a concomitant accumulation of lactic acid and a decrease in substrate conversion. Varying the pp_H2 had no significant effect on the conversion products and overall degradation of FW and WS, suggesting that pp_H2 was not the main limiting factor in SSDF. This study showed that the conversion of complex substrates by SSDF depends on the substrate type and is limited by the TS content.

Inhibition of anaerobic digestion processes: Applications of molecular tools

Inhibition of anaerobic digestion (AD) due to perturbation caused by substrate composition and/or operating conditions can significantly reduce performance. Such perturbations could be limited by elucidating microbial community response to inhibitors and devising strategies to increase community resilience. To this end, advanced molecular methods are increasingly being applied to study the AD microbiome, a diverse community of microbial populations with complex interactions. This literature review of AD inhibition studies indicates that inhibitory concentrations are highly variable, likely stemming from differences in community structure or activity profile and previous exposure to inhibitors. More recent molecular methods such as 'omics' tools, substrate mapping, and real-time sequencing are helping to unravel the complexity of AD inhibition by elucidating physiological and ecological significance of key microbial populations. The AD community must strive towards developing predictive abilities to avoid system failure (e.g., real-time tracking of an indicator species) to improve resilience of AD systems.

Solid anaerobic digestion: State-of-art, scientific and technological hurdles

In this paper, a state-of-art about solid anaerobic digestion (AD), focused on recent progress and trends of research is proposed. Solid anaerobic digestion should be the most appropriate process for degradation of by-products with high total solid (TS) content, especially lignocellulosic materials like agricultural waste (straw, manure), household waste and food waste. Solid AD is already widely used in waste water treatment plant for treating plant for sewage sludge but could be more developed for lignocellulosic materials with high TS content. Many research works were carried out in Europe on solid AD, focused on current hurdles (BMP, codigestion, inhibition, microbial population, rheology, water transfers, inoculum, etc.) in order to optimize the solid AD process. In conclusion, hurdles of solid AD process should and must be solved in order to propose better productivity and profitability of such system operating with high TS content (>15%), favouring reliable industrial processes.