Organic content influences sediment microbial fuel cell performance and community structure

Organic carbon compounds removal and phosphate immobilization for internal pollution control: Sediment microbial fuel cells, a prospect technology

As a current technology that can effectively remove organic carbon compounds and immobilize phosphorus in sediment, sediment microbial fuel cells (SMFCs) can combine sediment remediation with power generation. This review discusses the removal efficiency of SMFCs on organic carbon compounds, including sediment organic matter, antibiotics, oil-contaminated sediments, methane, persistent organic pollutants, and other organic pollutants in sediment, with more comprehensive and targeted summaries, and it also emphasizes the mitigation of phosphorus pollution in water from the perspective of controlling endogenous phosphorus. In this review, the microbial community is used as a starting point to explore more about its roles on phosphorus and organic carbon compounds under SMFCs. Electrode modification, addition of exogenous substances and combinations with other technologies to improve the performance of SMFCs are also reviewed. It is further demonstrated that SMFCs have the prospect of long-term sustainability, but more attention needs to be paid to the study of the mechanism of SMFCs and the continuous improvement of devices for further application in practice.

Significant Factors for Modelling Survival of Escherichia coli in Lake Sediments

Currently available numerical models that describe the fecal contamination of aquatic environments using Escherichia coli as an indicator bacterium did not consider its survival in sediments. We conducted a series of comparative experiments to reveal the independent and interactive effects of sediment factors, including temperature, pH, water-extractable total dissolved solids (TDSs), coexisting microbes, and sampling sites, in lake environments on E. coli survival. In experiments, E. coli survival was observed by controlling any two factors at a time. Consequently, the decrease in pH and presence of coexisting microbes enhanced E. coli die-off, whereas the addition of water-extractable TDSs promoted its growth. To select factors to be considered for modelling E. coli survival in sediments, the independent effects of each factor and the interaction effect of the two factors were statistically compared based on their effect sizes (η2). As a result, pH (η2 = 59.5-89.0%) affected E. coli survival most significantly, followed by coexisting microbes (1.7-48.4%). Among the interactions affecting E. coli survival, including pH or coexisting microbes-which had larger independent effects-relatively larger statistically significant interactions were observed between pH and coexisting microbes (31.1%), coexisting microbes and water-extractable TDSs (85.4%), and coexisting microbes and temperature (26.4%).

Sediment microbial fuel cell coupled floating treatment wetland for enhancing non-reactive phosphorus removal

The presence of non-reactive phosphorus (NRP) in environmental waters presents a potential risk of eutrophication and poses challenges for the removal of all phosphorus (P) fractions. This study presents the first investigation on the removal performance and mechanism of three model NRP compounds, sodium tripolyphosphate (STPP), adenosine 5'-monophosphate (AMP) and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC), in the sediment microbial fuel cell-floating treatment wetland (SMFC-FTW). Coupling SMFC with plants proved to be effective at removing NRP via electrochemical oxidation and plant uptake, particularly the challenging-to-degrade phosphonates that contain C-P bonds. Compared with the control group, the removal efficiencies of the model NRP in SMFC were observed to increase by 11.9%-20.8%. SMFC promoted the conversion of NRP to soluble reactive phosphorus (sRP) and the transfer of P to sediment. Furthermore, the electrochemical process enhanced both plant growth and P uptake, and increased P assimilation by 72.6%. The presence of plants in the bioelectrochemical system influenced the occurrence and fate of P by efficiently assimilating sRP and supporting microbial transformation of NRP. Consequently, plants enhanced the removal efficiencies of all P fractions in the overlying water. This study demonstrated that SMFC-FTW is a promising technology to remove various NRP species in environmental waters.

The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

In this work, the ferrous (Fe2+) and graphitic N modified graphene-based composite cathode materials (N-rGO/Fe3O4) were developed through an in-situ reduction method, aiming to facilitate the two-electron pathway in the oxidation-reduction process. This approach generated a specific concentration of H2O2, enabling the construction of a sediment bio-electro-Fenton system using Fe2+ released from the cathode materials. Notably, this system operates without the need for proton exchange membranes. During the cathode material preparation, the utilization of Fe2+ as a reduction agent for graphene oxide (GO), triggered ammonia water to form graphitic N in graphene sheets. This addition enhanced the two-electron pathway, resulting in increased H2O2 production. Specifically, when the Fe2+ concentration was maintained at 0.1 mol/L, precise preparation of N-rGO/Fe3O4 occurred, leading to a maximum output voltage of 0.528 V and a maximum power density of 178.17 mW/m2. The degradation of methyl orange (MO) reached 68.91% within a 25-h period, a phenomenon contributed to the presence of graphitic N in the graphene sheets. H2O2, a byproduct of the two-electron pathway in cathode oxidation reduction reaction, played a crucial role in constructing the bio-electro-Fenton system. This system, in conjunction with Fe2+ released from N-rGO/Fe3O4, facilitated the complete degradation process of MO.

Methane emission reduction oriented extracellular electron transfer and bioremediation of sediment microbial fuel cell: A review

Sediment is the internal and external source of water environment pollution, so sediment remediation is the premise of water body purification. Sediment microbial fuel cell (SMFC) can remove the organic pollutants in sediment by electroactive microorganisms, compete with methanogens for electrons, and realize resource recycling, methane emission inhibiting and energy recovering. Due to these characteristics, SMFC have attracted wide attention for sediment remediation. In this paper, we comprehensively summarized the recent advances of SMFC in the following areas: (1) The advantages and disadvantages of current applied sediment remediation technologies; (2) The basic principles and influencing factors of SMFC; (3) The application of SMFC for pollutant removal, phosphorus transformation and remote monitoring and power supply; (4) Enhancement strategies for SMFC in sediments remediation such as SMFC coupled with constructed wetland, aquatic plant and iron-based reaction. Finally, we have summarized the drawback of SMFC and discuss the future development directions of applying SMFC for sediment bioremediation.

Effects of carbon source on electricity generation and PAH removal in aquaculture sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) have been used for treating pollutants in sediment or overlying water. This study investigated the feasibility of constructing SMFCs under aquaculture conditions by employing indigenous carbohydrates as substrates to enhance the removal efficiency of polycyclic aromatic hydrocarbons (PAHs) in sediment, as well as the correlation between PAHs removal and electricity generation in SMFCs. The results showed that adding glucose could allow SMFCs to generate more electrical power and increase the removal efficiency of PAHs (by 57.2% for naphthalene, 41.3% for acenaphthene, and 36.5% for pyrene). In addition, starch enhanced PAHs removal by 49.9%, 35.8%, and 31.2%, respectively, whereas cellulose enhanced removal by 44.3%, 29.3%, and 26.9%, respectively. Pearson correlation coefficients between the level of electrical power generated and the removal masses of the three PAHs were 0.485, 0.830**, and 0.851**. Thus, the use of SMFCs could be an effective approach for PAH treatment in aquaculture, and the electrical power generated could be used as an in-situ indicator for the biodegradation rate of SMFCs.

Quantification of Internal Resistance Contributions of Sediment Microbial Fuel Cells Using Petroleum-Contaminated Sediment Enriched with Kerosene

Anaerobic biodegradation of petroleum-contaminated sediments can be accomplished by a sediment microbial fuel cell (SMFC), but the recovered energy is very low (~4 mW m−2). This is due to a high internal resistance (Ri) that develops in the SMFC. The evaluation of the main experimental parameters that contribute to Ri is essential for developing a feasible SMFC design and this task is normally performed by electrochemical impedance spectroscopy (EIS). A faster and easier alternative procedure to EIS is to fit the SMFC polarization curve to an electrochemical model. From there, the main resistance contributions to Ri are partitioned. This enables the development of a useful procedure for attaining a low SMFC Ri while improving its power output. In this study, the carbon-anode surface was increased, the biodegradation activity of the indigenous populations was improved (by the biostimulation method, i.e., the addition of kerosene), the oxygen reduction reaction was catalyzed, and a 0.8 M Na2SO4 solution was used as a catholyte at pH 2. As a result, the initial SMFC Ri was minimized 20 times, and its power output was boosted 47 times. For a given microbial fuel cell (MFC), the main resistance contributions to Ri, evaluated by the electrochemical model, were compared with their corresponding experimental results obtained by the EIS technique. Such a validation is also discussed herein.

Effect of starch-derived organic acids on the removal of polycyclic aromatic hydrocarbons in an aquaculture-sediment microbial fuel cell

This study constructed sediment microbial fuel cells (SMFCs) for polycyclic aromatic hydrocarbons (PAHs) removal in contaminated aquaculture sediment. Starch, a waste deposited in aquaculture sediment, was employed as the co-substrate for electricity generation and PAHs removal, and the effect of starch-derived organic acids on SMFC performance was assessed. The results indicated that sufficient starch promoted PAHs removal (69.9% for naphthalene, 55.6% for acenaphthene, and 46.8% for pyrene) in dual-chamber SMFC, whereas excessive starch attenuated SMFC performance because the organic acids accumulation reduced anode pH, decreased species diversity, and changed the microbial communities. The electricity generation and PAHs removal were positively correlated (R > 0.96), and both of them were related to Macellibacteroides belonging to Bacteroidetes. However, a larger single-chamber SMFC device did not obtain enhanced PAHs removal owing to the restricted "effective range" of the anode. Hence, more challenges need to be addressed to realize the practical application of SMFC.

Bio-energy generation and treatment of tannery effluent using microbial fuel cell

In this study, Graphite Particle (GP) and Carbon Cloth (CC) are employed as anode electrodes to study both bio-energy generation, and decrease of Chemical Oxygen Demand (COD) simultaneously using tannery effluent. The influence of electrodes distance (10 cm and 20 cm) on electricity production was evaluated. COD removal level of GP (75%) and CC (60%), maximum power outputs for 10 cm distance (600 ± 5 mW m^-2) & (500 ± 10 mW m^-2) and for 20 cm distance (520 ± 5 mW m^-2) and also (430 ± 20 mW m^-2) GP and CC were noted correspondingly. The outcomes of different parameters of MFC namely pH, conductivity, COD concentration, membrane thickness and size of bio-energy generation from tannery effluent in the MFC were investigated. The experimental results reveal that electrode provides highest power output with 10 cm distance between anode and cathode chamber. As a result, GP electrode is gradually viable, biocompatible, effective and adaptable for field application in MFC. The GP electrode has high potential for more power output, when compared to the CC electrode. The MFC system performance was improved with increasing effluent COD concentration (2340-4720 ppm), anolyte conductivity (1.6-8.1 mS cm^-1) and membrane area (9-20 cm²). The system working with conductivity of 8.1 mS cm^-1 and its effluent COD concentration of 4720 ppm generated the maximum peak power density of 44.69 mW m^-2 with respective current density of 109 mA m^-2. The findings thus show that considerable power production and effluent treatment can be achieved by MFC.

Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector

Microbial fuel cell (MFC) is lauded for its potentials to solve both energy crisis and environmental pollution. Technologically, it offers the capability to harness electricity from the chemical energy stored in the organic substrate with no intermediate steps, thereby minimizes the entropic loss due to the inter-conversion of energy. The sciences underneath such MFCs include the electron and proton generation from the metabolic decomposition of the substrate by microbes at the anode, followed by the shuttling of these charges to cathode for electricity generation. While its promising prospects were mutually evinced in the past investigations, the upscaling of MFC in sustaining global energy demands and waste treatments is yet to be put into practice. In this context, the current review summarizes the important knowledge and applications of MFCs, concurrently identifies the technological bottlenecks that restricted its vast implementation. In addition, economic analysis was also performed to provide multiangle perspectives to readers. Succinctly, MFCs are mainly hindered by the slow metabolic kinetics, sluggish transfer of charged particles, and low economic competitiveness when compared to conventional technologies. From these hindering factors, insightful strategies for improved practicality of MFCs were formulated, with potential future research direction being identified too. With proper planning, we are delighted to see the industrialization of MFCs in the near future, which would benefit the entire human race with cleaner energy and the environment.

Effects of water flow on performance of soil microbial fuel cells: Electricity generation, benzo[a]pyrene removal, microbial community and molecular ecological networks

Soil microbial fuel cells with water flow (W-SMFCs) as a driven force of substrate transport were constructed. Electricity generation, benzo[a]pyrene (BaP) removal, microbial communities and microbial molecular ecological networks were compared between W-SMFCs and their control reactors (without water flow, C-SMFCs) in 240 days of operation. The W-SMFCs started up faster than C-SMFCs (37 days vs. 50 days) and output higher startup voltage (148.45 mV vs. 111.90 mV). The water flow caused higher removal efficiency of BaP at sites >1 cm from the anode (S _{> 1 cm}) than at sites <1 cm from the anode (S _{< 1 cm}) in W-SMFCs, whereas in C-SMFCs, the removal efficiency of BaP at S_{< 1 cm} was higher than that at S_{> 1 cm}. The removal efficiency of BaP at S_{> 1 cm} in W-SMFCs was up to 1.7 times higher than that at S_{> 1 cm} in C-SMFCs on the 91^st day. After 240 days of operation, the biodegradation efficiency of absolute BaP amount was 45.95% in W-SMFCs, being 20% higher than that in C-SMFCs (38.17%). Moreover, the water flow caused highly tight interaction among the microbial species, which could be beneficial to BaP biodegradation. Conclusively, the water flow in soil was very beneficial for startup and biodegradation of BaP in SMFCs.

Response of bacterial communities to mining activity in the alpine area of the Tianshan Mountain region, China

Anthropogenic activities, such as mining, influence soil bacterial community composition and microbial distributions. In the current study, the patterns in microbial distribution and the environmental drivers shaping the soil bacterial community composition in the alpine mining area of the Tianshan Mountain region, China, were investigated, and the bacterial communities were analyzed using 16S rDNA pyrosequencing. The environmental factors and their relationships with the microbial community composition, structure, and diversity were also assessed. The soil organic carbon (SOC) concentration increased along the elevation gradient, with the highest concentration in the mining area, which increased microbial abundance and species richness. Some metals, like Ca, Cu, Pb, and Zn, accumulated significantly in the tailing area and were negatively correlated with the microbial community structure. Proteobacteria, Acidobacteria, Actinobacteria, and Verrucomicrobia were the dominant phyla; these dominant phyla were more abundant in the areas without mining than in the areas with mining at the same altitude. The relative abundance of Proteobacteria and Verrucomicrobia significantly increased along the elevation gradient, while that of Actinobacteria in the mining camp area was more than twice those in the other areas due to higher soil pH. Soil biomass was the highest in the valley. Collectively, these results elucidate the influence of anthropogenic mining activities on soil microbial communities in alpine mining soils and provide a basis for the future management of heavy metal-contaminated areas using the indigenous dominant bacterial phyla.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

Combined bioaugmentation with electro-biostimulation for improved bioremediation of antimicrobial triclocarban and PAHs complexly contaminated sediments

Haloaromatic antimicrobial triclocarban (TCC) is an emerging refractory contaminant that commonly coexisted with conventional contaminants such as polycyclic aromatic hydrocarbons (PAHs). TCC may negatively affect the metabolic activity of sediment microorganisms and persist in environment; however, remediation methods that relieve the TCC inhibitory effect in sediments remain unknown. Here, a novel electro-biostimulation and bioaugmentation combined remediation system was proposed by the simultaneous introduction of a TCC-degrading Ochrobactrum sp. TCC-2 and electrode into the TCC and PAHs co-contaminated sediments. Results indicated the PAHs and TCC degradation efficiencies of the combined system were 2.9-3.0 and 4.6 times respectively higher than those of the control group (no electro-biostimulation and no bioaugmentation treatments). The introduced strain TCC-2 and the enriched electroactive bacteria and PAHs degraders (e.g. Desulfobulbus, Clostridium, and Paenarthrobacter) synergistically contributed to the accelerated degradation of PAHs and TCC. The preferential elimination of the TCC inhibitory effect through bioaugmentation treatment could restore microbial functions by increasing the functional gene abundances related to various metabolic processes. This study offers new insights into the response of sediment functional communities to TCC stress, electro-biostimulation and bioaugmentation operations and provides a promising system for the enhanced bioremediation of the PAHs and TCC co-contaminated sediments.

Ecological Effects of Heavy Metal Pollution on Soil Microbial Community Structure and Diversity on Both Sides of a River around a Mining Area

The objectives of this study were to understand the characteristics of heavy metal pollution caused by mining activities on the two sides of the Shun'an river and the response of soil microorganisms to the habitats by different contamination levels and vegetation. This paper selected soil samples from the banks of the Shun'an River near the Shizishan mining area, which is at the left of the river, in Tongling, Anhui Province, China. Using Illumina MiSeq 2500 technology, we analyzed the relationship between environmental factors and microbial communities. As the distance from the mining area increased, the heavy metal comprehensive pollution and potential risk value decreased. Additionally, the pollution severity and risk value of the left bank, where the mining area lies, were generally higher than those of the right bank. Because the symmetric sampling points on both banks of the river had similar planting types, their environmental factors and microbial community structure were similar and clustered. However, under different vegetation, the paddy soils tended to have a higher nutrient content and community richness and diversity than the vegetable fields or the abandoned land. It was found that soil microbial communities in this area were mostly affected by pH and Nemerow pollution index (P_N). The pH significantly affected the abundance and structure of most microorganisms. In addition, Proteobacteria, Acidobacteria, and Bacteroidetes had significant tolerance to Zn, Pb, and Cd. By exploring the potential use of these tolerant microorganisms, we seek to provide strains and the theoretical basis for the bioremediation of areas contaminated by heavy metal.

Impact of sediment parameters in the prediction of benthic microbial fuel cell performance

The benthic microbial fuel cell (BMFC) is a promising technology for harvesting renewable energy from marine littoral environments. The scientific community has researched BMFC technology for well over a decade, but the in situ performance remains challenging. To address this challenge, BMFC power experiments were performed on sediment collected from San Diego Bay (CA, USA), La Spezia (Italy) and Honolulu (HI, USA) in the ever-changing littoral environment. Analysis of BMFC laboratory data found the power density varied substantially across 11 sites in San Diego Bay. In addition, data from experiments repeated at four locations in San Diego Bay showed significant differences between experiments performed in 2014, 2016 and 2019. Multivariable linear analysis showed BMFC 90 day cumulative power density was positively correlated with the total organic carbon (p < 0.05) and negatively correlated with the black carbon in the sediment (p < 0.05). Regression coefficients trained on the San Diego Bay data from 2014 facilitated accurate predictions of BMFC performance in 2016 and 2019. The modeling paradigm accurately explained variations in BMFC power performance in La Spezia and showed sediment parameters can impact BMFC performance differently across geographic regions. The results demonstrate a great potential to use sediment parameters and statistical modeling to predict BMFC power performance prior to deployment in oceanographic environments, thereby reducing cost, work force and resources.

Carbon nanomaterial-modified graphite felt as an anode enhanced the power production and polycyclic aromatic hydrocarbon removal in sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) can be used to generate electricity and remove organic contaminants. For electricity generation and contaminant removal, the anode material is one of important factors influencing the performance of SMFCs. In this study, graphene (GR), graphene oxide (GO) and carbon nanotubes (CNTs) were applied to modify the graphite felt (GF) anode in SMFCs during 110 d operation. An economical and easy modification method with the carbon nanomaterials was applied. The carbon nanomaterials increased the electrochemically active surface areas and biomass content of the anodes and correspondingly effectively enhanced the generation of electricity and the removal rates of loss on ignition (LOI) and polycyclic aromatic hydrocarbons (phenanthrene and pyrene). During the steady period from 50 d to 110 d, the GO-SMFCs favored the enrichment of EAB and thus output the highest voltages of 30.60-48.61 mV. The GR-SMFCs and GO-SMFCs generated high electric power of approximate 0.98 ± 0.14 kJ and 0.87 ± 0.04 kJ, followed by CNT-SMFCs (0.57 ± 0.06 kJ) and GF-SMFCs (0.49 ± 0.07 kJ) during the 110 d operation. The PAH degradation was not directly related to the electric current in the SMFCs. Near the anodes, the order of the phenanthrene removal rates was CNT-SMFCs (78.1%) > GR-SMFCs (73.0%) ≈ GO-SMFCs (71.2%) > GF-SMFCs (45.6%), and the order of the pyrene removal rates was GO-SMFCs (69.6%) ≈ GR-SMFCs (68.2%) ≈ CNT-SMFCs (66.7%) > GF-SMFCs (42.3%). The three carbon nanomaterials increased the microbial community diversity and slightly changed the microbial community distribution of biofilms on the anodes. Correlation analysis indicated that the degradation of phenanthrene was positively correlated with the abundances of Pseudomonas, Thauera, Diaphorobacter, Tumebacillus and Lysobacter. Pyrene degradation was strongly correlated with LOI degradation.

Increased power production and removal efficiency of polycyclic aromatic hydrocarbons by plant pumps in sediment microbial electrochemical systems: A preliminary study

The low mass transfer of sediment substrates has limited the efficiency and application of a sediment microbial electrochemical system (SMES) as a power generator and as a practical bioremediation technology. In this study, we designed a new plant-driven SMES (New-PSMES) with a separated sand-filled anode column in order to improve the mass transfer and thereby enhance the microorganism activity, power generation and bioremediation range and efficiency for polycyclic aromatic hydrocarbons (PAHs). Because of the mass flow driven by the plants, the New-PSMESs started up approximately 7 d earlier and produced voltages 30-70 mV higher than the planted SMESs, and had greater enzyme activities and residual organic carbon than the unplanted and planted SMESs. In the New-PSMES, the total mass removal rates of phenanthrene and pyrene were 62.98% and 57.02% after 82 d, and these values were 1.5-2 times higher than those of the unplanted and planted SMESs. The removal of PAHs in the sediment was primarily attributed to nonelectrochemical biodegradation at sites far from the anode and to electrochemical reactions on the anode. The top three most abundant phyla in all samples were Proteobacteria, Chloroflexi, and Bacteroidetes. Aerobic bacteria, such as Nautella, were enriched in the biofilms of the New-PSMESs.

Development of a sediment microbial fuel cell-based biosensor for simultaneous online monitoring of dissolved oxygen concentrations along various depths in lake water

A novel multi-cathode, single-anode system integrating a sediment microbial fuel cell -based biosensor was developed for in-situ, continuous, and online monitoring of dissolved oxygen (DO) concentrations along various depths of lake water. The signal feedback mechanism was evaluated based on a relationship between voltage and DO concentration at corresponding depths. With an external resistance of 1000 Ω, a linear relationship was found (regression coefficient, R² = 0.9576) between voltage and DO in the range of 0-9 mg L^-1. The sensor performance was further optimized under various influence factors. The results of indoor experiments indicated that the optimal anode to single cathode area ratio was 11:1. The sensor signal could also be significantly influenced by organic matter content in sediment; thus, the addition of 5% organic matter could obtain a stable anode potential and a high voltage output. Furthermore, the sensor was operated in-situ for 67 days in a lake environment, which also led to a good correlation between the voltage and DO (R² = 0.8897). Thus, this integrated system has great potential as an early-warning program to help identify environmental risks in aquatic environments.

A three chamber bioelectrochemical system appropriate for in-situ remediation of nitrate-contaminated groundwater and its reaction mechanisms

A novel laboratory experiment of three chamber bioelectrochemical (surface water-sediment-groundwater, SSG) system was established in this study, which combined a sediment microbial fuel cell (SMFC) reactor and biofilm electrode reactor (BER) and was self-driven. Simulated groundwater was firstly used to explore the reaction mechanisms of this system. The simulated groundwater conditions were static and the surface water and the groundwater systems were isolated. The results showed that the SMFC continuously supplied a stable voltage of 622 mV ± 20 mV, driving the BER and the related nitrate removal process. Compared to the control systems, the SSG system had higher nitrate removal with a denitrification rate of 3.87 mg N/(L·h). In addition, the sediment organic matter in the SMFC reactor decreased by 66.2%. Based on the electrochemical analysis and microbial community analysis, the SMFC reactor and BER worked synergistically to enhance the performance of both reactors in this system. The presence of microorganisms accelerated the electron transfer efficiency throughout the system, and the microcurrent helped a more fixed community structure to develop and stimulated the growth of denitrifying bacteria. The dominant genera detected in the mature biofilm samples were all microorganisms common in soil and groundwater, indicating that this system may be environmentally friendly. The nitrate removal efficiency for actual groundwater was higher than that for the simulated groundwater, indicating that the elements in the actual groundwater promote the nitrate removal efficiency. These results indicate that the SSG system has the potential for in-situ nitrate bioremediation, with minimal maintenance and health risk.

Study on the influence of soil microbial community on the long-term heavy metal pollution of different land use types and depth layers in mine

To understand the importance of the response of soil microbial communities to the stress of heavy metals around mining areas by assessing the feedback of soil ecosystems in different soil habitats, this article selected different land use types (Mining area, Dressing area, Heap mine area, Tailings area and Vegetable field) and surface soil samples of different depths (0-10 cm, 10-20 cm, 20-30 cm) as the variables related to the mining activities in the Shizishan mining area in Tongling, Anhui Province, China. Soil physicochemical properties and heavy metal concentrations of the different land use types and soil depths were compared. Illumina MiSeq. 2500 Sequencing Technology was used to analyze the abundance and structural diversity of the microbial community in soil samples. The relationship between mine soil pollution characteristics and microbial community were investigated. The results showed that soil physicochemical properties and heavy metals significantly affected the microbial community. The microbial community structure was significantly variable in vertical soil depth-layer habitats. The relative abundance (1%) of the soil microbial community at the phylum level was represented by a total of 14 phyla, where the two most dominant phyla were Proteobacteria (41.71%) and Firmicutes (20.44%). The two bacteria were positively related with Cu, Zn, Pb, and pH but negatively associated with soil organic matter (SOM), available potassium (AK), and moisture content (MC). Therefore, Proteobacteria and Firmicutes were highly resistant to heavy metals. These results increased our understanding of microbial variation and assembly pattern under different land use types in heavy metals contaminated mining soils.

Long-term effect of biochar amendment on the biodegradation of petroleum hydrocarbons in soil microbial fuel cells

Biochar is extensively applied in amendment of contaminated soils. However, the effect of biochar on the biodegradation of petroleum hydrocarbons and electricity generation in soil microbial fuel cells (MFCs) remains unclear. Here, three biochars respectively derived from poultry (chicken manure, CB), agriculture (wheat straw, SB) and forestry industries (wood sawdust, WB) were investigated after 223 days of amendment. Consequently, high removal for alkanes was in CB with the mineral nutrition and phosphorus while aromatics were in SB with the most N content and the highest molecular polarity. The lowest removal efficiency of total petroleum hydrocarbons was observed in WB with the highest surface area, whereas the most charge was obtained. The different performance of soil MFCs was due to physicochemical properties of biochar and colonized microbial communities of bacteria and archaea. The abundance of Actinotalea increased by 144-263% in SB and CB while that of Desulfatitalea distinctly increased in WB. Meanwhile, species from Methanosarcina, Methanoculleus, Halovivax and Natronorubrum exerted probably a methanogenic degrading role. This study revealed that the degrader, azotobacter and electricigens exhibited a close relationship in order to degrade hydrocarbons and generate electricity in soil bioelectrochemical remediation systems.

Effects of Cd, Cu, Zn and their combined action on microbial biomass and bacterial community structure

Heavy metal pollution can decrease the soil microbial biomass and significantly alter microbial community structure. In this study, a long-term field experiment (5 years) and short-term laboratory experiment (40 d) were employed to evaluate the effects of heavy metals (Cd, Cu, Zn), and their combinations at different concentrations, on the soil microbial biomass and the bacterial community. The ranges of heavy metal concentration in the long-term and short-term experiments were similar, with concentration ranges of Cd, Cu and Zn of about 0.3-1.5, 100-500, and 150-300 mg kg^-1, respectively. Microbial biomass decreased with increasing soil heavy metal concentrations in both the long-term and short-term experiments. The interaction between soil physicochemical factors (pH, TN, TC) and heavy metals (Cd, Cu, Zn) played a major role in change in the bacterial community in long-term polluted soil. In the laboratory experiment, although each heavy metal had an adverse effect on the microbial biomass and community structure, Cu appeared to have a greater role in the changes compared to Cd and Zn. However, the synergistic effects of the heavy metals were greater than those of the single metals and the synergistic effect between Cu and Cd was greater than that of Cu and Zn.

Anodic potentials, electricity generation and bacterial community as affected by plant roots in sediment microbial fuel cell: Effects of anode locations

A planted sediment microbial fuel cell (PSMFC) is a promising new technology for harvesting energy and remediating a contaminated geo-environment. In this study, the effects of roots (of Acorus tatarinowii) on oxygen profiles in sediment, power generation, and anodic bacterial community were investigated in PSMFCs and unplanted SMFCs with different anode locations to roots. The presence of plant did not improve the electricity generation when roots were placed on the surface of an anode because a high amount of oxygen loss from roots increased the redox potential at anode and made aerobic bacteria co-exit and compete with electrochemically active bacteria in substance utilization. It was suggested to place the anode under the roots with a proper distance, where the PSMFCs made use of root-derived organics, avoiding the negative effects of oxygen loss. Oxygen loss could control the diurnal rhythm of power generation in the PSMFCs.

Construction of a Self-Powered System for Simultaneous In Situ Remediation of Nitrate and Cr(VI) Contaminated Synthetic Groundwater and River Sediment

A novel self-powered system was constructed to in situ remove nitrate and Cr(VI) from synthetic groundwater and achieve river sediment remediation simultaneously. The sediment organic matter in an anodic chamber was used as a carbon source to provide self-powered energy to reduce the cathode’s contaminants. With the acceptance of protons and electrons, nitrate and Cr(VI) were transformed into nitrite and Cr(III), respectively. In a 72 h test with both nitrate and Cr(VI) present, nitrate was removed at a rate of 70.96 mg/m3·h and Cr(VI) at a rate of 8.95 mg/m3·h. When a phosphate buffer was used in the test, their removal rates were changed to 140.83 mg/m3·h and 8.33 mg/m3·h, respectively. The results showed that the self-powered system could achieve the simultaneous reduction of nitrate and Cr(VI), although the presence of Cr(VI) hindered nitrate reduction. This system could realize simultaneous in situ groundwater and sediment remediation, with no need for additional energy or materials.

Arsenic mitigation in paddy soils by using microbial fuel cells

Arsenic (As) behavior in paddy soils couples with the redox process of iron (Fe) minerals. When soil is flooded, Fe oxides are transformed to soluble ferrous ions by accepting the electrons from Fe reducers. This process can significantly affect the fate of As in paddy fields. In this study, we show a novel technique to manipulate the Fe redox processes in paddy soils by deploying soil microbial fuel cells (sMFC). The results showed that the sMFC bioanode can significantly decrease the release of Fe and As into soil porewater. Iron and As contents around sMFC anode were 65.0% and 47.0% of the control respectively at day 50. The observed phenomenon would be explained by a competition for organic substrate between sMFC bioanode and the iron- and arsenic-reducing bacteria in the soils. In the vicinity of bioanode, organic matter removal efficiencies were 10.3% and 14.0% higher than the control for lost on ignition carbon and total organic carbon respectively. Sequencing of the 16S rRNA genes suggested that the influence of bioanodes on bulk soil bacterial community structure was minimal. Moreover, during the experiment a maximum current and power density of 0.31 mA and 12.0 mWm^-2 were obtained, respectively. This study shows a novel way to limit the release of Fe and As in soils porewater and simultaneously generate electricity.

Enhanced bioelectroremediation of a complexly contaminated river sediment through stimulating electroactive degraders with methanol supply

Bioelectroremediation is an efficient, sustainable, and environment-friendly remediation technology for the complexly contaminated sediments. Although various recalcitrant pollutants could be degraded in the electrode district, the degradation efficiency was generally confined by the low total organic carbon (TOC) content in the sediment. How to enhance the electroactive degraders' activity and efficiency remain poorly understood. Here we investigated the bioeletroremediation of a complexly contaminated river sediment with low TOC in a cylindric sediment microbial fuel cell stimulated by methanol. After 200 days treatment, the degradation efficiencies of total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAH), and cycloalkenes (CYE) in the electrode district with methanol stimulation were 1.45-4.38 times higher compared with those in the non-electrode district without methanol stimulation. The overall electrode district communities were significantly positively correlated with the variables of the enhanced TPH, PAH, CYE and TOC degradation efficiencies (p < .01). The joint electrical and exogenous methanol stimulation selectively enriched electroactive degraders (Geobacter and Desulfobulbus) in the anode biofilms, and their proportion was markedly positively correlated with the characteristic and total pollutants degradation efficiencies (p < .001). This study offers a new insight into the response of key electroactive degraders to the joint stimulation process.

Bioenergy generation and rhizodegradation as affected by microbial community distribution in a coupled constructed wetland-microbial fuel cell system associated with three macrophytes

Rhizodeposits excreted by various macrophytes might lead to the potential discrepancy of microbial community distribution in constructed wetland coupled with microbial fuel cell (CW-MFC), which has been considered as main factors for the variations of bioelectricity generation during wastewater treatment. In this study, CW-MFC has been associated with three macrophytes (J. effuses, T. orientalis and S. validus) for domestic sewage treatment, also unplanted CW-MFC was performed as a control system. Macrophyte T. orientalis and S. validus can significantly strengthen the bioenergy output in CW-MFC. Highest current (94.27mAm^-2) and power densities (21.53mWm^-2) were obtained in CW-MFC planted with T. orientalis. Removal efficiencies of COD, NO₃-N and NH₃-N in CW-MFC planted with S. validus was respectively 5.8%, 7.2%, and 23.9% higher than that of unplanted system. Notably, the oxygen depletion in S. validus CW-MFC reactor during the dark cycle was higher that of other reactors. Results of high-throughput sequencing analysis showed that higher biodiversity was observed in rhizosphere than that of anode material, and the relative abundance of Desulfobulbus sp. and Geobacter sp. has been apparently promoted in the samples of rhizosphere. However, a higher relative abundance of electrochemically active bacteria (Proteobacteria) was observed on the surface of anode electrode material. In addition, microbes (Cytophagales, Clostridium sp., and Dechloromonas sp., and so forth) found in rhizosphere show a capability to decompose refractory contaminants. These contaminants and death roots in the upper part of wetland could be oxidized to fat acids, which may be used as the electrons acceptors for promoting the bioelectricity generation during wastewater treatment.

Ecological effects of soil properties and metal concentrations on the composition and diversity of microbial communities associated with land use patterns in an electronic waste recycling region

Soil microbes play vital roles in ecosystem functions, and soil microbial communities may be strongly structured by land use patterns associated with electronic waste (e-waste) recycling activities, which can increase the heavy metal concentration in soils. In this study, a suite of soils from five land use types (paddy field, vegetable field, dry field, forest field, and e-waste recycling site) were collected in Longtang Town, Guangdong Province, South China. Soil physicochemical properties and heavy metal concentrations were measured, and the indigenous microbial assemblages were profiled using 16S rRNA high-throughput sequencing and clone library analyses. The results showed that mercury concentration was positively correlated with both Faith's PD and Chao1 estimates, suggesting that the soil microbial alpha diversity was predominantly regulated by mercury. In addition, redundancy analysis indicated that available phosphorus, soil moisture, and mercury were the three major drivers affecting the microbial assemblages. Overall, the microbial composition was determined primarily by land use patterns, and this study provides a novel insight on the composition and diversity of microbial communities in soils associated with e-waste recycling activities.

Long-term performance of sediment microbial fuel cells with multiple anodes

This study constructed multiple-anode SMFCs with different anode spacing and investigated their long-term performance. Results show that multiple anodes extended electricity generation from SMFCs due to increased anode surface area, but the distance between the anodes showed limited effects on power output. Power generation was seriously inhibited when temperature was below 20°C, but system recovered once temperature rose based to ambient condition. The degradation of readily oxidizable organic matter (ROOM) and decomposition of refractory organics occurred simultaneously. Worms' growth in the sediment destabilized power output, caused the increase of COD and decrease of pH and DO in water layer, and affected the microbial communities in sediments. ANME-2D related to anaerobic oxidation of methane was enriched around anodes and might benefit electron transfer in SMFCs.