Microbial community structure of different electrode materials in constructed wetland incorporating microbial fuel cell

Prevalence of Escherichia coli in electrogenic biofilm on activated carbon in microbial fuel cell

For a better understanding of the distribution of depth-dependent electrochemically active bacteria at in the anode zone, a customized system in a microbial fuel cell (MFC) packed with granular activated carbon (GAC) was developed and subsequently optimized via electrochemical tests. The constructed MFC system was sequentially operated using two types of matrice solutions: artificially controlled compositions (i.e., artificial wastewater, AW) and solutions obtained directly from actual sewage-treating municipal plants (i.e., municipal wastewater, MW). Notably, significant difference(s) of system efficiencies between AW or MW matrices were observed via performance tests, in that the electricity production capacity under MW matrices is < 25% that of the AW matrices. Interestingly, species of Escherichia coli (E. coli) sampled from the GAC bed (P1: deeper region in GAC bed, P2: shallow region of GAC near electrolytes) exhibited an average relative abundance of 75 to 90% in AW and a relative abundance of approximately 10% in MW, while a lower relative abundance of E. coli was found in both the AW and MW anolyte samples (L). Moreover, similar bacterial communities were identified in samples P1 and P2 for both the AW and MW solutions, indicating a comparable distribution of bacterial communities over the anode area. These results provide new insights into E. coli contribution in power production for the GAC-packed MFC systems (i.e., despite the low contents of Geobacter (> 8%) and Shewanella (> 1%)) for future applications in sustainable energy research. KEY POINTS: • A microbial community analysis for depth-dependence in biofilm was developed. • The system was operated with two matrices; electrochemical performance was assessed. • E. coli spp. was distinctly found in anode zone layers composed of activated carbon.

Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system

Cr (VI) is extremely harmful to both the environment and human health, and it can linger in the environment for a very long period. In this research, the Leersia hexandra Swartz constructed wetland-microbial fuel cell (CW-MFC) system was constructed to purify Cr (VI) wastewater. By comparing with the constructed wetland (CW) system, the system electricity generation, pollutants removal, Cr enrichment, and morphological transformation of the system were discussed. The results demonstrated that the L. hexandra CW-MFC system promoted removal of pollutants and production of electricity of the system. The maximum voltage of the system was 499 mV, the COD and Cr (VI) removal efficiency was 93.73% and 97.00%. At the same time, it enhanced the substrate and L. hexandra ability to absorb Cr and change it morphologically transformation. Additionally, the results of XPS and XANES showed that the majority of the Cr in the L. hexandra and substrate was present as Cr (III). In the L. hexandra CW-MFC system, Geobacter also functioned as the primary metal catabolic reducing and electrogenic bacteria. As a result, L. hexandra CW-MFC system possesses the added benefit of removing Cr (VI) while producing energy compared to the traditional CW system.

Key issues to consider toward an efficient constructed wetland-microbial fuel cell: the idea and the reality

The research on constructed wetland (CW) and microbial fuel cell (MFC) has been separate studies worldwide with crucial achievements being made in both fields. Due to environmentally friendly feature (of CW) and rich microbial population and excellent electrode catalytic activity (of MFC), CW and MFC have their own anticipated application prospect in wastewater purification and biological electricity generation. More significantly, the idea of embedding MFC into CW to form CW-MFC expands the scope for both of them and this has received much interest in recent years due to its striking features of sewage treatment efficiency, electricity generation, sustainability, and environmental friendliness. The increasing interest and the lack of soul of CW-MFC emerging to the new researchers reflect the need to recall the idea and summarize its development with regard to achieving its reality via some key issues This forms the basis of the paper. The paper also includes how to enhance the efficiency of electricity generation and supplement energy consumption, the degradation of emerging pollutants, and the degradation mechanism as well as the potential joint application of CW-MFC with other treatment technique. A mass of CW-MFC design parameters has been synthesized from the literature. Challenges and potential directions of CW-MFC in the future are prospected. It is expected that the paper can serve as a linkage for bridging knowledge gaps for further studies of CW-MFC.

Saturated constructed wetland-microbial fuel cell system and effect on dissolved oxygen gradient, electricity generation and ammonium removal

The aim of this work was to assess effect of saturated constructed wetland-Microbial fuel cell system on dissolved oxygen gradient, electricity generation and ammonium removal. Two laboratory-scale systems, one planted with Schoenoplectus californicus (SCW1-MFC) and other without plant (SCW2-MFC), were fed discontinuously with synthetic wastewater over 90 days. Both systems were operated at different organic loading rate (12 and 28 g COD/m2d) and ammonium loading rate (1.6 and 3.0 g NH4+- N/m2 d) under open circuit and close circuit mode. The results indicate that between lower and upper zones of wetlands the average values were in the range of 1.22 ± 0.32 to 1.39 ± 0.27 mg O2/L in SCW1-MFC and 1.28 ± 0.24 to 1.56 ± 0.31 mg O2/L in SCW2-MFC. The effect of operating mode (closed and open circuit) and vegetation on DO was not significant (p > 0.05). Chemical oxygen demand (COD) removal efficiencies, fluctuated between 90 and 95% in the SCW1-MFC and 82 and 94% in the SCW2-MFC system. Regarding NH4+- N, removal efficiencies were above 85% in both systems reaching values maximus 98%. The maximum power density generated was 4 and 10 mW/m2 in SCW1-MFC, while SCW2-MFC recorded the highest values (12 and 22 mW/m2).

Effect of anode material and dispersal limitation on the performance and biofilm community in microbial electrolysis cells

In a microbial electrolysis cell (MEC), the oxidization of organic compounds is facilitated by an electrogenic biofilm on the anode surface. The biofilm community composition determines the function of the system. Both deterministic and stochastic factors affect the community, but the relative importance of different factors is poorly understood. Anode material is a deterministic factor as materials with different properties may select for different microorganisms. Ecological drift is a stochastic factor, which is amplified by dispersal limitation between communities. Here, we compared the effects of three anode materials (graphene, carbon cloth, and nickel) with the effect of dispersal limitation on the function and biofilm community assembly. Twelve MECs were operated for 56 days in four hydraulically connected loops and shotgun metagenomic sequencing was used to analyse the microbial community composition on the anode surfaces at the end of the experiment. The anode material was the most important factor affecting the performance of the MECs, explaining 54-80 % of the variance observed in peak current density, total electric charge generation, and start-up lag time, while dispersal limitation explained 10-16 % of the variance. Carbon cloth anodes had the highest current generation and shortest lag time. However, dispersal limitation was the most important factor affecting microbial community structure, explaining 61-98 % of the variance in community diversity, evenness, and the relative abundance of the most abundant taxa, while anode material explained 0-20 % of the variance. The biofilms contained nine Desulfobacterota metagenome-assembled genomes (MAGs), which made up 64-89 % of the communities and were likely responsible for electricity generation in the MECs. Different MAGs dominated in different MECs. Particularly two different genotypes related to Geobacter benzoatilyticus competed for dominance on the anodes and reached relative abundances up to 83 %. The winning genotype was the same in all MECs that were hydraulically connected irrespective of anode material used.

Recovery of electron and carbon source from agricultural waste corncob by microbial electrochemical system to enhance wastewater denitrification

The denitrification process in wastewater treatment plants (WWTPs) is limited by insufficient carbon sources. Agricultural waste corncob was investigated for its feasibility as a low-cost carbon source for efficient denitrification. The results showed that the corncob as the carbon source exhibited a similar denitrification rate (19.01 ± 0.03 gNO₃^--N/m³d) to that of the traditional carbon source sodium acetate (19.13 ± 0.37 gNO₃^--N/m³d). When filling corncob into a microbial electrochemical system (MES) three-dimensional anode, the release of corncob carbon sources was well controlled with an improved denitrification rate (20.73 ± 0.20 gNO₃^--N/m³d). Carbon source and electron recovered from corncob led to autotrophic denitrification and heterotrophic denitrification occurred in the MES cathode, which synergistically improved the denitrification performance of the system. The proposed strategy for enhanced nitrogen removal by autotrophic coupled with heterotrophic denitrification using agricultural waste corncob as the sole carbon source opened up an attractive route for low-cost and safe deep nitrogen removal in WWTPs and resource utilization for agricultural waste corncob.

Performance of vertical up-flow-constructed wetlands integrating with microbial fuel cell (VFCW-MFC) treating ammonium in domestic wastewater

Vertical up-flow-constructed wetlands integrating with microbial fuel cell (VFCW-MFC) were evaluated for NH4+-N removal and bioelectricity recovery. The experiments were carried out in lab-scale VFCW-MFC microcosms treating synthetic domestic wastewater under different operational conditions of pH, hydraulic retention time, and mass loading rate. Effects of wild ornamental grass (Cenchrus setaceus) on treatment performance and voltage output were investigated simultaneously. Experiments demonstrated that the neutral pH of influents favoured NH4+-N removal and power generation. Extended retention time improved treatment capacity and power output but likely depended on the substrate availability. COD removal and power output increased, while NH4+-N removal decreased with increasing mass loading rates. At the loading rate of 88.31 mg COD/L.day, planted VFCW-MFCs exhibited better NH4+-N treatment performance (36.9%) and higher voltage output (132%-143%) than unplanted systems. Plants did not affect the COD removal efficiency of VFCW-MFCs (>95%). Power density was in the range of 1.26-1.59 mW/m² in planted microcosms with a maximum CE of 13.6%. The anode layer accounted for a major proportion of NH4+-N removal in VFCW-MFCs. This study implies that NH4+-N in domestic wastewaters with relatively high COD:N ratios can be treated effectively in up-flow CW-MFCs via anaerobic processes, including anammox and heterotrophic denitrifying processes. The mass loading rate could be a critical parameter to balance different microbial processes, thus, coincidently determining the potential of power recovery from wastewaters.

Effects of the bioelectrochemical technique on methane emission and energy recovery in constructed wetlands (CWs) and related biological mechanisms

In this study, effects of bioelectrochemical technique on methane emission and energy recovery, and related mechanism underlying microbial competition were investigated. The results showed that running MFC was beneficial in reducing CH₄ emissions and promoting COD removal rates, regardless of whether the plant roots were located at the anode or the cathode. CH₄ emission was significantly higher in open-circuit reactors (6.2 mg m^-2 h^-1) than in closed-circuit reactors (3.1 mg m^-2 h^-1). Plant roots at the cathode had the highest electricity generation and the lowest CH4 emissions. The highest power generation (0.49 V, 0.33 w m^-3) and the lowest CH₄ emissions (2.3 mg m^-2 h^-1) were observed in the reactors where Typha orientalis was planted with plant roots at the cathode. The role of plants in strengthening electron acceptor was greater than that of plant rhizodeposits in strengthening electron donors. Real-time quantitative PCR (q-PCR) and correlation analysis indicated that the mcrA genes and CH₄ emissions were positively correlated (r = 0.98, p < 0.01), while no significant relationship between CH₄ emissions and pmoA genes was observed. Illumina sequencing revealed that more abundant exoelectrogens and denitrifying bacteria were observed when plant roots were located in cathodes. Strictly acetotrophic archae (Methanosaetaceae) were likely the main electron donor competitors with exoelectrogens. The results showed that the location of both plant species and plant roots at the electrode played an important role in CH₄ control and electricity generation. Therefore, it is necessary to strengthen plant configuration to reduce CH₄ emissions, to promote sustainable development of wastewater treatment.

Replacing starch with resistant starch (Laminaria japonica) improves water quality, nitrogen and phosphorus budget and microbial community in hybrid snakehead (Channa maculata ♀ × Channa argus ♂)

It is essential to increase the use of carbohydrates as an energy source and improve protein synthesis and utilization to reduce ammonia nitrogen emissions. A 60-day cultural experiment was conducted to assess the impact of resistant starch (kelp meal, Laminaria japonica) replacing starch on water quality, nitrogen and phosphorus budget and microbial community of hybrid snakehead. Approximately 1350 experimental fish (11.4 ± 0.15 g) were randomly divided into control group (C, 20% starch) and four resistant starch groups: low replacement group (LR, 15% starch), medium replacement group (MR, 10% starch), high replacement group (HR, 5% starch) and full replacement group (FR, 0% starch). The crude protein and crude fat content of hybrid snakehead fish fed with the FR diet had the most significant improvement (P < 0.05). However, resistant starch also increased the effectiveness of nitrogen and phosphorus utilization in hybrid snakeheads, which decreased the proportion of total nitrogen and total phosphorus in tail water. The minimum nitrogen and phosphorus emission rate was when the starch level was 6.1%. Denitrifying microbes including Gemmobacter, Rhodobacter, Emticicia and Bosea have become much more prevalent in group FR (P < 0.05). In general, replacing starch with resistant starch can enhance the rate at which nitrogen and phosphorus are used in feeding, lessening water pollution and altering environmental microbial composition. PRACTITIONER POINTS: Resistant starch (RS) improves whole fish nutritional content. Resistant starch improves dietary nitrogen and phosphorus utilization. Resistant starch acts as a carbon source and encourages the colonization of denitrifying bacteria in water.

Evidence of competition between electrogens shaping electroactive microbial communities in microbial electrolysis cells

In single-chamber microbial electrolysis cells (MECs), organic compounds are oxidized at the anode, liberating electrons that are used for hydrogen evolution at the cathode. Microbial communities on the anode and cathode surfaces and in the bulk liquid determine the function of the MEC. The communities are complex, and their assembly processes are poorly understood. We investigated MEC performance and community composition in nine MECs with a carbon cloth anode and a cathode of carbon nanoparticles, titanium, or stainless steel. Differences in lag time during the startup of replicate MECs suggested that the initial colonization by electrogenic bacteria was stochastic. A network analysis revealed negative correlations between different putatively electrogenic Deltaproteobacteria on the anode. Proximity to the conductive anode surface is important for electrogens, so the competition for space could explain the observed negative correlations. The cathode communities were dominated by hydrogen-utilizing taxa such as Methanobacterium and had a much lower proportion of negative correlations than the anodes. This could be explained by the diffusion of hydrogen throughout the cathode biofilms, reducing the need to compete for space.

Effects of electroconductive materials on treatment performance and microbial community structure in biofilter systems with silicone tubings

Biofilter systems coupling with microbial electrochemical technology can enhance the removal performance of pollutants. In this study, two types of coke (PK-A and PK-LSN) were used as electroconductive substrates in biofilter systems with silicone tubings. The results showed that the silicone tubings were beneficial for removing NH₄⁺-N. The PK-A systems reached removal efficiencies up to 83.5-85.3% for NH₄⁺-N without aeration. Compared to gravel systems, significantly higher removal efficiencies of NO₃^--N (84.8-95.4%) were obtained in coke systems, and better removal of PO₄^3--P (91.9-95.7%) was also simultaneously achieved in PK-A systems. Redundancy analysis (RDA) indicated that the better performances of coke systems rely on the functions of both electroactive (Trichococcus and Sulfurovum) and non-electroactive bacteria (Clostridium_sensu_stricto_1, Propionicicella, and Acinetobacter). These findings highlight the important contribution of silicone tubings to oxygen supply and provide useful guidance for the application of coke in composite matrix systems.

Recycled utilization of ryegrass litter in constructed wetland coupled microbial fuel cell for carbon-limited wastewater treatment

To solve wetland plant litter disposal and improve the nitrogen removal of carbon-limited wastewater, the integration of microbial fuel cell (MFC) and recycled utilization of ryegrass litter planted in constructed wetland (CW) may be effective. CW and MFC-CW with periodical ryegrass litter addition (10 days one cycle) were constructed to study the effects of ryegrass litter on nitrogen removal, electricity production and microorganism community. The results showed that total nitrogen removal of CW and MFC-CW after ryegrass litter addition reached 80.54 ± 10.99% and 81.94 ± 7.30%, increased by 22.19% and 17.50%, respectively. Three-dimensional excitation emission matrix fluorescence spectroscopy results revealed that the soluble organic matters produced by the hydrolyzed ryegrass litter were mainly tryptophan, tyrosine and fulvic acid, which promoted the growth of microorganisms and denitrification. The dosage of 200 g m^-2 did not cause the rise of refractory organic matter in the effluent. The ryegrass litter addition promoted the average voltage and power density slightly in MFC-CW, but the internal resistance also increased temporarily. Compared to the sole CW, current stimulation caused by MFC not only helped to increase the denitrification, but also accelerated the biomass hydrolysis. MFC could contribute to the enrichment and growth of functional microorganisms related to denitrification and organic degradation, such as Vogesella, Devosia, Thermomonas and Brevibacterium. The bacterial genera involved in the ryegrass litter degradation were mainly Thermomonas, Propionicimonas, TM7a, Clostridium_sensu_stricto_1 and so on. This study provided a promising way for practical applications of MFC-CW in the treatment of carbon-limited wastewater, especially in small ecological facilities.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Insight into the performance discrepancy of GAC and CAC as air-cathode materials in constructed wetland-microbial fuel cell system

Constructed wetland-microbial fuel cell (CW-MFC) has exhibited the performance discrepancy between using granular activated carbon (GAC) and columnar activated carbon (CAC) as air-cathode materials. No doubt, this is linked with electrochemical performance and decontaminants characteristics in the CW-MFC system. To provide insight into this performance discrepancy, three CW-MFCs were designed with different carbon-material to construct varied shapes of air-cathodes. The results showed that the ring-shaped cathode filled with GAC yielded a highest voltage of 458 mV with maximum power density of 13.71 mW m^-2 and >90% COD removal in the CW-MFC system. The electrochemical characteristics and the electron transport system activity (ETSA) are the driven force to bring the GAC a better electron transportation and oxygen reduction reaction (ORR). This will help elucidating underlying mechanisms of different activated carbon for air-cathode and thus promote its large application.

A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes

Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.

The role and related microbial processes of Mn-dependent anaerobic methane oxidation in reducing methane emissions from constructed wetland-microbial fuel cell

Anaerobic oxidation of methane (AOM) plays an important role in global carbon cycle and greenhouse gas emission reduction. In this study, an effective green technology to reduce methane emissions was proposed by introducing Mn-dependent anaerobic oxidation of methane (Mn-AOM) and microbial fuel cell (MFC) technology into constructed wetland (CW). The results indicate that the combination of biological methods and bioelectrochemical methods can more effectively control the methane emission from CW than the reported methods. The role of dissimilated metal reduction in methane control in CW and the biochemical process associated with Mn-AOM were also investigated. The results demonstrated that using Mn ore as the matrix and operating MFC effectively reduced methane emissions from CW, and higher COD removal rate was obtained in CW-MFC (Mn) during the 200 days of operation. Methane emission from CW-MFC (Mn) (53.76 mg/m²/h) was 55.61% lower than that of CW (121.12 mg/m²/h). The highest COD removal rate (99.85%) in CW-MFC (Mn) was obtained. As the dissimilative metal-reducing microorganisms, Geobacter (5.10%) was found enriched in CW-MFC (Mn). The results also showed that the presence of Mn ore was beneficial to the biodiversity of CW-MFCs and the growth of electrochemically active bacteria (EAB) including Proteobacteria (35.32%), Actinobacteria (2.38%) and Acidobacteria (2.06%), while the growth of hydrogenotrophic methanogens Methanobacterium was effectively inhibited. This study proposed an effective way to reduce methane from CW. It also provided reference for low carbon technology of wastewater treatment.

The application of steel slag in a multistage pond constructed wetland to purify low-phosphorus polluted river water

To investigate the effect of a constructed wetland (CW) with steel slag as the filler on water contaminated by low phosphorus levels, a multistage pond CW system was designed in this study. Low-phosphorus polluted river water was used as the research object. This study explored the effects of using steel slag as a CW filler on phosphorus removal and the total phosphorus (TP) purification effect of the wetland system. The results showed that the TP removal rates in the ecological pond, oxidation pond, surface flow wetlands and submerged plant pond were 5.17%, 8.02%, 21.56%, and 16.31%, respectively. Intermittent increases in phosphorus concentration were observed in the reactors and were caused by the decay of plant tissues, which released pollutants. Because steel slag was added to the filler, the TP concentrations in the effluent of the first- and second-level horizontal subsurface CWs increased by 151.13% and 16.29%, respectively, compared to the influent concentration. The 20th to 40th days of the test run was a period of rapid phosphorus release of the system. The use of steel slag has a potential risk of phosphorus release when applied in CWs used to purify low-phosphorus contaminated water bodies.

Performance and bacterial community dynamics of hydroponically grown Iris pseudacorus L. during the treatment of antibiotic-enriched wastewater at low/normal temperature

Antibiotics are widely detected in the water environment, posing a serious threat to the health of humans and animals. The effect of levofloxacin (LOFL) on pollutant removal and the difference in the influence mechanisms at normal and low temperatures in constructed wetlands are worth discussing. A hydroponic culture experiment was designed with Iris pseudacorus L. at low and normal temperatures. LOFL (0-100 µg/L) was added to the systems. The results indicated that the removal of pollutants was affected most by temperature, followed by LOFL concentration. At the same concentration of LOFL, the pollutant removal rate was significantly higher at normal temperature than at low temperature. Low concentrations of LOFL promoted the degradation of pollutants except TN under normal-temperature conditions. Compared with the results at low temperature, the bacterial community richness was higher and the diversity of bacterial communities was lower under normal-temperature conditions. The genera and the function of bacteria were greatly affected by antibiotic concentration, temperature and test time. A series of microorganisms resistant to antibiotics and low temperature were identified in this study. The results will provide valuable information and a reference for our understanding of the ecological effects of LOFL.

Nitrogen removal performance and bacterial communities in zeolite trickling filter under different influent C/N ratios

In this study, the degradation performance of nutrients in zeolite trickling filter (ZTF) with different influent C/N ratios and aeration conditions was investigated. Microaeration was beneficial for enhancing NH₄⁺-N removal performance. Due to the sufficient carbon source supply under a C/N ratio of 8, a high removal efficiency of NH₄⁺-N and TN was simultaneously observed in ZTF. In addition, TN removal mainly occurred at the bottom, which might be explained by the sufficient nutrients available for bacteria to multiply in this zone. The abundant genera were Acinetobacter, Gemmobacter, Flavobacterium, and Pseudomonas, all of which are heterotrophic nitrification-aerobic denitrification (HNAD) bacteria. In addition, biofilm only slowed down the adsorption rate but did not significantly reduce the adsorption capacity of zeolite. Bio-zeolite had NH₄⁺-N well adsorption capacity and bio-desorption capacity. Biological nitrogen removal performance was superior to physicochemical absorption of zeolite. The results suggested that the physicochemical of zeolite and biochemical reactions of microorganism coupling actions may be the main nitrogen transformation pathway in ZTF. Our research provides a reference for further understanding the nitrogen removal mechanism of zeolite bioreactors.

Organic matter removal and nitrogen transformation by a constructed wetland-microbial fuel cell system with simultaneous bioelectricity generation

Microbial fuel cells integrated into constructed wetlands have been previously studied. Nevertheless, their application as a suitable treatment for wastewater is still in the developmental stage. In this context, the aim of this study was to evaluate organic matter removal and nitrogen transformation by a microbial fuel cell integrated into a constructed wetland (CWMFC). To accomplish this, three experimental systems were operated under batch-mode conditions over 170 days: i) one was planted with Schoenoplectus californicus (P-CWMFC); ii) another was unplanted (NP-CWMFC); and iii) the third system did not have any electrodes (CW) and was used as a control. Chemical oxygen demand (COD) removal efficiency ranged between 74-87%, 69-81% and 62-72% for the P-CWMFC, NP-CWMFC and CW systems, respectively, with organic loading rates (OLR) ranging from 4.8 to 7.9 g COD/m² d. NH₄⁺-N removal efficiency exceeded 98%, 90% and 83% for P-CWMFC, NP-CWMFC and CW, respectively. Wastewater treatment performance was improved due to anaerobic oxidation that occurred on the anodes. Organic matter removal was 18% higher in closed-circuit mode than in open-circuit mode in both integrated systems (P-CWMFC and NP-CWMFC), and these differences were significant (p < 0.05). With respect to the performance of microbial fuel cells, the maximum power density (8.6 mW/m²) was achieved at an organic loading rate of 7.9 g COD/m² d with an internal resistance and coulombic efficiency of 251 Ω and 2.4%, respectively. The results obtained in this work can provide positive impacts on CW development by enhancing anaerobic degradation without forced aeration.

Effects of anode materials on the performance and anode microbial community of soil microbial fuel cell

Five soil microbial fuel cells (SMFCs) with graphite felt, aluminium sheet, activated carbon fibre felt, graphite paper and carbon cloth as anodes were constructed using the petroleum hydrocarbon polluted soils as substrates. After 115 days of operation, the SMFC with graphite felt anode performed the best in both bioelectricity output and removal of target pollutants, with the bioelectricity output parameters of 345 mV for stable voltage, 24.0 mW/m² for power density and 774 Ω for internal resistance, and the removal rates of 59.14 % for total petroleum hydrocarbon, 61.65 % for anthracene, and 55.92 % for pyrene, respectively. The conductivity of the material was the key factor affecting the electron transfer rate of the anode, which determined the electric acclimation and screening intensity of SMFC to soil microbes, leading to the growth and succession of the electricigens-dominanted anode microbial community with various abundances of phyla and genera. The surface structure of the anode material played a critical role in the internal resistance of SMFC through affecting the mass transfer of substrate and metabolites, and it might also change the abundance of microbes especially those non-electricigens on the community through different adhesion.

Mapping the field of constructed wetland-microbial fuel cell: A review and bibliometric analysis

The embedding microbial fuel cell (MFC) into constructed wetlands (CW) to form CW-MFC bears the potential to obtain bioelectricity and a clean environment. In this study, a bibliometric analysis using VOSviewer based on Web of Science data was conducted to provide an overview by tracing the development footprint of this technology. The countries, institutions, authors, key terms, and keywords were tracked and corresponding mapping was generated. From 2012 to September 2020, 442 authors from 129 organizations in 26 countries published 135 publications in 42 journals with total citation of 3139 times were found. The key terms analysis showed four clusters: bioelectricity generation performance, mechanism study, refractory pollutants removal, and enhanced conventional contaminants removal. Further research themes include exploring the biochemical properties of electrochemically active bacteria, emerging contaminants removal, effective bioelectricity harvest and the use, and biosensor development as well as scaling-up for real field application. The bibliometric results provide valuable references and information on potential research directions for future studies.

A comprehensive review on emerging constructed wetland coupled microbial fuel cell technology: Potential applications and challenges

Constructed wetlands (CWs) integrated with bioelectrochemical systems (BESs) are being intensively researched with the names like constructed wetland-microbial fuel cell (CW-MFC), electro-wetlands, electroactive wetlands, and microbial electrochemical technologies-based constructed wetland since the last decade. The implantation of BES in CW facilitates the tuning of redox activities and electron flow balance in aerobic and anaerobic zones in the CW bed matrix, thereby alleviating the limitation associated with electron acceptor availability and increasing its operational controllability. The benefits of CW-MFC include high treatment efficiency, electricity generation, and recalcitrant pollutant abatement. This article presents CW-MFC technology's journey since its emergence to date, encompassing the research done so far, including the basic principle and functioning, bio-electrocatalysts as its machinery, influential factors for microbial interactions, and operational parameters controlling different processes. A few key challenges and potential applications are also discussed for the CW-MFC systems.

The sequential dewatering and drying treatment enhanced the potential favorable effect of microbial communities in drinking water treatment residue for environmental recycling

The beneficial recycling of drinking water treatment residue (DWTR) for environmental remediation has received increasingly interests; whereas, the reported potential effect of microbial communities in different DWTR was ambiguous, which was unfavorable for the beneficial recycling. This study hypothesized that the varied treatment to DWTR in different waterworks induced the ambiguous effect; accordingly, responses of microbial communities in DWTR to the sequential dewatering and drying treatment were determined based on samples from three waterworks, in combination with 180-d incubation tests. The results showed that the microbial communities varied remarkably in different DWTR before being dewatered (DWTS). However, after dewatering, the increased microbial diversities were observed, and the microbial communities exhibited higher similarities among the dewatered DWTR from different waterworks; furthermore, the dewatered DWTR with subsequent drying treatment enriched more bacteria genus with potential environmental functions after incubation tests. The variations of microbial communities were closely related to DWTR properties, such as pH, organic matter, metals, P, and water extractable nutrients. Further analysis indicated that with maintaining high adsorption capability of DWTR, the dewatering treatment tended to retain specific microbial communities that may be induced by the applied similar techniques in different waterworks; the accumulated nutriments due to drying treatment and the stable DWTR pH enhanced the potential functional bacteria enrichment. Overall, the dewatering and drying treatment led to microbial communities with generality in different DWTR and increased the potential favorable microbial effect, promoting DWTR recycling in environmental remediation.

Scale-up and control the voltage of sediment microbial fuel cell for charging a cell phone

In this research, a power management system (PMS) has been developed to charge a cell phone battery based on sediment microbial fuel cells (SMFCs). The single SMFC produces a voltage of 1.16 V, which is too low for practical application. The voltage is increased by connecting several SMFCs in series or parallel, but the voltage reversal occurs when it is directly connected to the load. To prevent the voltage reversal, the super capacitor is first charged by the five different stack SMFCs and the charged super capacitor is used to provide the input power to a PMS. This PMS increases and regulates the input voltage of stack SMFCs up to 5.02 V for charging a cell phone battery. The charging and discharging times of the super capacitors have been investigated with five different stack SMFCs. In all five stack SMFCs, only module-5 provides power to PMS for long periods (13 min). Further, the cell phone battery is continuously charged using the two parallel-connected stack SMFCs similar to the module-5. The battery has been fully charged in 26 h using 72 SMFCs. The charged battery is used to perform for three purposes; voice calling, music playing and LED strip lighting. This study is informative for the application of SMFC in an off-grid location.

Operation mechanism of constructed wetland-microbial fuel cells for wastewater treatment and electricity generation: A review

Constructed wetland-microbial fuel cells (CWL-MFCs) are eco-friendly and sustainable technology, simultaneously implementing contaminant removal and electricity production. According to intensive research over the last five years, this review on the operation mechanism was conducted for in-depth understanding and application guidance of CWL-MFCs. The electrochemical mechanism based on anodic oxidation and cathodic reduction is the core for improved treatment in CWL-MFCs compared to CWLs. As the dominant bacterial community, the abundance and gene-expression patterns of electro-active bacteria responds to electrode potentials and contaminant loadings, further affecting operational efficiency of CWL-MFCs. Plants benefit COD and N removal by supplying oxygen for aerobic degradation and rhizosphere secretions for microorganisms. Multi-electrode configuration, carbon-based electrodes and rich porous substrates affect transfer resistance and bacterial communities. The possibilities of CWL-MFCs targeting at recalcitrant contaminants like flame retardants and interchain interactions among effect components need systematic research.

A review on the contribution of electron flow in electroactive wetlands: Electricity generation and enhanced wastewater treatment

In less than a decade, bioelectrochemical systems/microbial fuel cell integrated constructed wetlands (electroactive wetlands) have gained a considerable amount of attention due to enhanced wastewater treatment and electricity generation. The enhancement in treatment has majorly emanated from the electron transfer or flow, particularly in anaerobic regions. However, the chemistry associated with electron transfer is complex to understand in electroactive wetlands. The electroactive wetlands accommodate diverse microbial community in which each microbe set their own potential to further participate in electron transfer. The conductive materials/electrodes in electroactive wetlands also contain some potential, due to which, several conflicts occur between microbes and electrode, and results in inadequate electron transfer or involvement of some other reaction mechanisms. Still, there is a considerable research gap in understanding of electron transfer between electrode-anode and cathode in electroactive wetlands. Additionally, the interaction of microbes with the electrodes and understanding of mass transfer is also essential to further understand the electron recovery. This review mainly deals with the electron transfer mechanism and its role in pollutant removal and electricity generation in electroactive wetlands.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts

The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.

Improved Simultaneous Decolorization and Power Generation in a Microbial Fuel Cell with the Sponge Anode Modified by Polyaniline and Chitosan

In recent years, microbial fuel cell (MFC) has been regarded as a promising technology for dye wastewater treatment. Compared with traditional anaerobic reactors, MFC has better decolorization effect while producing electricity simultaneously. In this paper, a double-chamber MFC with the sponge anode modified by polyaniline and chitosan-NCNTs was employed for simultaneous azo dye decolorization and bioelectricity generation. The influence of dye concentration, co-substrate concentration, and operating temperature on the performance of MFC with the modified anodes were studied. The results showed that a high decolorization efficiency (98.41%) and maximum power density (2816.67 mW m^-3) of MFC equipped with modified bioanodes were achieved due to the biocompatibility and bioelectrocatalysis of modified material. And the biomass on the modified anode's surface was increased by 1.47 times. Additionally, microbial community analysis revealed that the modification of polyaniline and chitosan-NCNTs improved the selective enrichment of specific communities and the main microorganism was the electroactive and decolorizing bacteria Enterobacter (62.84%). Therefore, the composite anode is capable of fully utilizing the synergistic role of various materials, leading to superior performance of dye decolorization in MFCs. This work provided a strategy for the research on the recovery of biomass energy and decolorization in wastewater treatment. Graphical Abstract.

CH4 control and associated microbial process from constructed wetland (CW) by microbial fuel cells (MFC)

Global warming is becoming more severe. We here proposed an innovative green technique aimed at reducing the CH₄ emissions from constructed wetlands (CWs) in which CH₄ is controlled by microbial fuel cells (MFCs). The results of our work indicated that CH₄ emissions from CWs could be controlled by operating MFC. The CH₄ fluxes significantly decreased in the MFC-CW (close circuit CC) compared with the control MFC-CW (open circuit OC). The bioelectricity generation and COD removal rates also differed in the two systems. The highest power density (0.27 W m^-3) and the lowest CH₄ emissions (4.7 mg m^-2 h^-1) were observed in the CC system. The plants' effects on the performance of the MFC-CWs were also investigated. The plant species had a profound impact on the CH₄ emissions and electricity production in MFC-CWs. The greatest CH₄ flux (9.5 mg m^-2 h^-1) was observed from the MFC-CW planted with Typha orientalis, while the CH₄ emissions from the MFC-CW planted with Cyperus alternifolius were reduced by 45%. Additional microbial processes were investigated. Quantitative real-time PCR (q-PCR) analysis indicated that the gene abundance of eubacterial 16 S rRNA, particulate methane monooxygenase (pmoA), and methyl coenzyme M reductase (mcrA) significantly differed for the control CW and MFC-CWs planted with different plants. In the CC systems, the mcrA genes in the anode were low, while the pmoA genes in the cathode were high. The operation of MFCs in CWs changed the exoelectrogenic and methanogenic community structures. Sequencing analysis indicated that phylotypes related to Geobacter, Bacteroides, and Desulfovibrio were specifically enriched in the CC systems. The results demonstrated that the operation of MFCs in the CWs resulted in the competition between the electrogenes and methanogenes, which resulted in distinctive microbial populations and biochemical processes that suppressed the CH₄ emissions from the CWs.

Intensified nitrogen removal by heterotrophic nitrification aerobic denitrification bacteria in two pilot-scale tidal flow constructed wetlands: Influence of influent C/N ratios and tidal strategies

This study investigated the influence of C/N ratios and tidal strategies on nitrogen removal and bacterial communities in two pilot-scale tidal flow constructed wetlands (TFCWs) with simultaneous nitrification-denitrification process. Heterotrophic nitrification aerobic denitrification (HNAD) was the main nitrogen transformation pathway in both TFCWs. High C/N ratios and effluent circulation at low temperature promoted HNAD in TFCWs with high nitrogen removal efficiencies (72.6%-95.5% for NH₄⁺-N and 70.9%~91.8% for TN). Effluent circulation had more influence on bacterial community structure and diversity than C/N ratios. Among 16 detected genera related to nitrogen removal, HNAD bacteria (HNADB) were abundant. Especially, some dominant HNADB (e.g. Aeromonas, Hydrogenophage and Gemmobacter) were core genera, showing positive interactions with other genera related to nitrogen removal. Tidal strategies had more contribution to the shifts in these genera than C/N ratios. This study highlights the importance of HNADB in pilot-scale TFCWs and their responses to C/N ratios and tidal strategies.

Effects of graphite and Mn ore media on electro-active bacteria enrichment and fate of antibiotic and corresponding resistance gene in up flow microbial fuel cell constructed wetland

This study assessed the influence of substrate type on pollutants removal, antibiotic resistance gene (ARG) fate and bacterial community evolution in up-flow microbial fuel cell constructed wetlands (UCW-MFC) with graphite and Mn ore electrode substrates. Better COD removal and higher bacterial community diversity and electricity generation performance were achieved in Mn ore constructed UCW-MFC (Mn). However, the lower concentration of sulfadiazine (SDZ) and the total abundances of ARGs were obtained in the effluent in the graphite constructed UCW-MFC (s), which may be related to higher graphite adsorption and filter capacity. Notably, both reactors can remove more than 97.8% of ciprofloxacin. In addition, significant negative correlations were observed between SDZ, COD concentration, ARG abundances and bacterial a-diversity indices. The LEfse analysis revealed significantly different bacterial communities due to the substrate differences in the two reactors, and Geobacter, a typical model electro-active bacteria (EAB), was greatly enriched on the anode of UCW-MFC (Mn). In contrast, the relative abundance of methanogens (Methanosaeta) was inhibited. PICRUSt analysis results further demonstrated that the abundance of extracellular electron transfer related functional genes was increased, but the methanogen function genes and multiple antibiotic resistance genes in UCW-MFC (Mn) anode were reduced. Redundancy analyses indicated that substrate type, antibiotic accumulation and bacterial community were the main factors affecting ARGs. Moreover, the potential ARG hosts and the co-occurrence of ARGs and intI1 were revealed by network analysis.

Zero valent iron supported biological denitrification for farmland drainage treatments with low organic carbon: Performance and potential mechanisms

In this work, the feasibility and performance of zero valent iron (ZVI) coupled anaerobic microorganisms in nitrogen removal under low organic carbon condition were investigated, through the comparison of mono-ZVI system and mono-cell system. Coupled system showed the highest total nitrogen (TN) removal efficiency of 67.85% with the addition of 15 g L^-1 iron shavings at pH 7.0, which was higher than 29.62% in the mono-ZVI system and 43.86% in the mono-cell system. Besides, the activities of nitrate reductase (NAR), nitrite reductase (NIR), nitric oxide reductase (NOR) and nitrous oxide reductase (N₂OR) were significantly improved at ZVI dosage of 15 g L^-1 and pH 7.0, which contributed to the higher TN removal efficiency in coupled system. The extent of sludge granulation was greater in the coupled system than mono-cell system, which benefited to the high operational performance and stability of coupled system. The promoted generation of extracellular polymeric substances (EPS) and formation of iron oxides in the coupled system also took advantages on nitrogen removal through adsorption. In addition, ZVI could largely enrich the functional species related to nitrogen removal in the system at phyla and genera level, which could be reasoned for the enhanced nitrogen removal efficiency. In conclusion, this study will improve the understandings of nitrogen removal in the coupled system and be useful to ensure the application of ZVI-supported biological process in the remediation of farmland drainage.

Endogenous inorganic carbon buffers accumulation and self-buffering capacity enhancement of air-cathode microbial fuel cells through anolyte recycling

Anolyte acidification is inevitable in the operation of buffer-free microbial fuel cells (MFCs), which restricts the proliferation and metabolism of electroactive bacteria, and results in electric-power deterioration. The anodic metabolic end-products, inorganic carbons (IC), which are composed of H₂CO₃ (dissolved CO₂), HCO₃^-, and CO₃^2-, are ideal endogenous buffers, whereas the naturally accumulated IC are far from enough to prevent anolyte acidification. In this work, different volume ratios of the anolytes (10%, 30%, and 50%) were recycled to increase the IC concentrations of the single-chamber air-cathode buffer-free MFCs. Under anolyte recycling running mode, IC accumulation agreed with the SGompertz model and the fitting IC-asymptotic concentrations (IC_AC) grew exponentially to 18.5 mM, 24.4 mM, and 32.8 mM as the anolyte recycling ratio increased from 10% to 30% and 50%. Self-buffering running can be realized when the anolyte recycling ratio exceeds 50% for the MFC feeding on 1 g·L^-1 of acetate. The electric power for the 50% recycling scenario increased from the baseline control of 272.4 mW·m^-2 to 628.5 mW·m^-2. The coulombic efficiency (CE) was also apparently improved. This paper for the first time clarifies the accumulation law of endogenous IC buffers under anolyte partially recycling mode and their self-buffering effects.

Significance of water level in affecting cathode potential in electro-wetland

Bioelectricity production is always restricted by the limited cathode performance in integrated constructed wetland-microbial fuel cells (termed as electro-wetlands). Generally, the cathodes are located at the air-water interface for an oxygen-rich environment. However, its performance may still be unsatisfactory, resulting in a low bioelectricity production. After a long term trial in previous study, we recognised that the position of the electron collector in the cathode significantly affected the bioelectricity production in electro-wetlands. In this study, two cathode configurations of electron collector at the air-water interface and above water level for 1.5 cm, respectively, were evaluated for cell voltage and power density in a vertical up-flow electro-wetland. Results showed that maximum total power density was increased from 31 mW/m² to 165 mW/m² when the cathode electron collector was changed from the air-water interface to 1.5 cm above water level, proving that cathode configuration is the key factor in bioelectricity production.

Effect of HRT and external resistances on power generation of sidestream microbial fuel cell with CNT-coated SSM anode treating actual fermentation filtrate of municipal sludge

A microbial fuel cell (MFC) with multiwall carbon nanotube (CNT) coated stainless steel mesh (SSM) coated anode (S-MFC) was operated with a filtrate generated by the fermentation of municipal primary sludge. The S-MFC's maximum power density (MPD: 69.8-164.9 W/m³) and energy recovery (ER: 0.15-0.60 kWh/kgCOD) were 7-21 times higher than those (3.8-27.3 W/m³ and 0.01-0.11 kWh/kgCOD) of MFC with a graphite felt as an anode (G-MFC). The microbial communities of S- and G-MFCs varied slightly depending on the electrode material. Chloroflexi (23.5%) was dominant in S-MFC, and Proteobacteria (25.3%) in G-MFC. Fermenting bacteria such as Rhodanobacter lindaniclasticus and Anaerolineaceae bacterium were dominated by continuous non-electrochemically active bacteria invasion because the actual fermentation filtrate was directly utilized as the substrate. Nevertheless, the CNT-coated SSM anode and the fermentation filtrate of primary sludge improved the power generation in MFC, which demonstrates the significant potential of this sidestream process for sludge treatment.

Contaminants removal and bacterial activity enhancement along the flow path of constructed wetland microbial fuel cells

Microbial fuel cells implemented in constructed wetlands (CW-MFCs), albeit a relatively new technology still under study, have shown to improve treatment efficiency of urban wastewater. So far the vast majority of CW-MFC systems investigated were designed as lab-scale systems working under rather unrealistic hydraulic conditions using synthetic wastewater. The main objective of this work was to quantify CW-MFCs performance operated under different conditions in a more realistic setup using meso-scale systems with horizontal flow fed with real urban wastewater. Operational conditions tested were organic loading rate (4.9 ± 1.6, 6.7 ± 1.4 and 13.6 ± 3.2 g COD/m²·day) and hydraulic regime (continuous vs. intermittent feeding) as well as different electrical connections: CW control (conventional CW without electrodes), open-circuit CW-MFC (external circuit between anode and cathode not connected) and closed-circuit CW-MFC (external circuit connected). Eight horizontal subsurface flow CWs were operated for about four months. Each wetland consisted of a PVC reservoir of 0.193 m² filled with 4/8 mm granitic riverine gravel (wetted depth 25 cm). All wetlands had intermediate sampling points for gravel and interstitial liquid sampling. The CW-MFCs were designed as three MFCs incorporated one after the other along the flow path of the CWs. Anodes consisted of gravel with an incorporated current collector (stainless steel mesh) and the cathode consisted of a graphite felt layer. Electrodes of closed-circuit CW-MFC systems were connected externally over a 220 Ω resistance. Results showed no significant differences between tested organic loading rates, hydraulic regimes or electrical connections, however, on average, systems operated in closed-circuit CW-MFC mode under continuous flow outperformed the other experimental conditions. Closed-circuit CW-MFC compared to conventional CW control systems showed around 5% and 22% higher COD and ammonium removal, respectively. Correspondingly, overall bacteria activity, as measured by the fluorescein diacetate technique, was higher (4% to 34%) in closed-circuit systems when compared to CW control systems.

Electricity production and the analysis of the anode microbial community in a constructed wetland-microbial fuel cell

The objective of this study is to assess bioelectricity generation, pollutant removal (COD, ammonium, nitrate) and the bacterial communities on anodes in constructed wetlands coupled with microbial fuel cells (CW-MFCs), through feeding the systems with three different types of synthetic wastewater (system 1: normal wastewater; system 2: ammonium-free wastewater; system 3: nitrate-free wastewater). Three CW-MFCs were operated with different wastewater concentrations and hydraulic retention times (HRTs) over a long time period (6 months). The results indicate that the maximum open circuit voltage (775.63 mV) and maximum power density (0.628 W m⁻³) were observed in system 3 (period 3), and that bioenergy production was inhibited in system 2, when feeding with ammonium-free wastewater continuously. COD removal rates in the three systems were similar during each period and ranged from 82.2 ± 6.8% to 98.3 ± 2.2%. Ammonium removal occurred at the air cathode of the CW-MFCs through nitrification, and a higher level of ammonium removal was found in system 1 (period 3) compared with the others. Meanwhile, denitrification occurred at the anaerobic anode of the CW-MFCs, and a large amount of nitrate was removed effectively. The highest nitrate removal rate was 98.8 ± 0.5% in system 2 (period 3). Additionally, four genera related to electricity generation were detected at the anode: Geothrix; Desulfovibrio; Desulfobulbus; and Geobacter. The relative abundances of Desulfovibrio, Desulfobulbus and Geothrix gradually increased during the three periods in system 3, which might be beneficial for bioelectricity generation. Further investigations are needed to optimize the CW-MFC performance and explain the mechanism behind the pollutant degradation and electron motion in the CW-MFCs.

The objective of this study is to assess bioelectricity generation, pollutant removal and the bacterial communities on anodes in constructed wetlands coupled with microbial fuel cells, through feeding the systems with three different types of synthetic wastewater.

Application of microbial fuel cell technology for wastewater treatment and electricity generation under Nordic countries climate conditions: Study of performance and microbial communities

Two microbial fuel cells were inoculated with activated sludge from Finland and operated under moderate (25 °C) and low (8 °C) temperatures. Operation under real urban wastewater showed similarities in chemical oxygen demand removal and voltage generated, although moderate temperature supported higher ammonium oxidation. Fungi disappeared in the microbial fuel cell operated at temperature of 25 °C. Archaea domain was dominated by methanogenic archaea at both temperature scenarios. Important differences were observed in bacterial communities between both temperatures, however generating similar voltage. The results supported that the implementation of microbial fuel cells in Nordic countries operating under real conditions could be successful, as well as suggested the flexibility of cold-adapted inoculum for starting-up microbial fuel cells, regardless of the operating temperature of the system, obtaining higher COD removal and voltage generation performances at low temperature than at moderate temperature.

Intensified heterotrophic denitrification in constructed wetlands using four solid carbon sources: Denitrification efficiency and bacterial community structure

Biodenitrification using solid carbon sources is a cost-effective way for nitrate removal. In the study, wheat straw, cotton, poly(butylene succinate), and newspaper was chosen as the carbon source to compare the denitrification efficiency and bacterial communities in constructed wetlands. Parameters including COD, NO₃^--N, NO₂^--N and total nitrogen (TN) were analyzed. Results indicated that newspaper provided significantly higher NO₃^--N and TN removal efficiency than the other three solid carbon sources in low-temperature condition. Moreover, both newspaper and wheat straw allowed high NO₃^--N and TN removal efficiency in high-temperature condition. According to pyrosequencing analysis, denitrifying bacteria Dechloromonas and Thauera were the predominant genus in the anaerobic zone of CO- (3.92 and 2.35%, respectively), WS- (1.97 and 1.02%, respectively) and NP-CWs (1.71 and 1.31%, respectively). Genus of Levilinea was enriched in NP- (1.02%) and WS-CWs (0.91%). Furthermore, genus Paludibacter (2.69%) and Saccharofermentans (3.14%) showed high relative abundance in WS-CWs.

Montmorillonite supported nanoscale zero-valent iron immobilized in sodium alginate (SA/Mt-NZVI) enhanced the nitrogen removal in vertical flow constructed wetlands (VFCWs)

Lacking of electron donor generally causes the low denitrification performance of constructed wetlands (CWs). Montmorillonite supported nanoscale zero-valent iron immobilized in sodium alginate (SA/Mt-NZVI) as novel electron donor-acceptor compounds were added in the denitrification zone of vertical flow constructed wetlands (VFCWs) to enhance the nitrogen removal. The key factors of the SA/Mt-NZVI dosage, the hydraulic retention time (HRT) of VFCWs, and the C/N ratios of influent were explored. SA/Mt-NZVI significantly improved the nitrogen (NO₃^--N) removal efficiency in VFCWs. When the optimal dosage of SA/Mt-NZVI was set as 2 g and the C/N was set as 6, the highest NO₃^--N removal efficiency was improved by 32.5 ± 1.0%. The microbial community analysis of by 16S rRNA had revealed that Proteobacteria and Bacteroidetes at phylum level and Betaproteobacteria, Gammaproteobacteria, and Alphaproteobacteria at class level played an important role in nitrogen removal.

Improving mechanisms of biohydrogen production from grass using zero-valent iron nanoparticles

This paper investigated the improving mechanisms and microbial community dynamics of using zero-valent iron nanoparticles (Fe⁰ NPs) in hydrogen fermentation of grass. Results showed that Fe⁰ NPs supplement improved microbial activity and changed dominant microbial communities from Enterobacter sp. to Clostridium sp., which induced a more efficient metabolic pathway towards higher hydrogen production. Meanwhile, it is also proposed that Fe⁰ NPs could accelerate electron transfer between ferredoxin and hydrogenase, and promote the activity of key enzymes by the released Fe²⁺. The maximal hydrogen yield and hydrogen production rate were 64.7 mL/g-dry grass and 12.1 mL/h, respectively at Fe⁰ NPs dosage of 400 mg/L, which were 73.1% and 128.3% higher compared with the control group. Fe⁰ NPs also shorten the lag time and facilitated the hydrolysis and utilization of grass. This study demonstrated that Fe⁰ NPs could effectively improve hydrogen production and accelerate the fermentation process of grass.

Effect of magnesium oxide nanoparticles on microbial diversity and removal performance of sequencing batch reactor

The performance, microbial enzymatic activity and microbial community of a sequencing batch reactor (SBR) have been explored under magnesium oxide nanoparticles (MgO NPs) stress. The NH₄⁺-N removal efficiency kept relatively stable during the whole operational process. The MgO NPs at 30-60 mg/L slightly restrained the removal of chemical oxygen demand (COD), and the presence of MgO NPs also affected the denitrification and phosphorus removal. The specific oxygen uptake rate, nitrifying and denitrifying rates, phosphorus removal rate, and microbial enzymatic activities distinctly varied with the increase of MgO NPs concentration. The appearance of MgO NPs promoted more reactive oxygen species generation and lactate dehydrogenase leakage from activated sludge, suggesting that MgO NPs had obvious toxicity to activated sludge in the SBR. The protein and polysaccharide contents of extracellular polymeric substances from activated sludge increased with the increase of MgO NPs concentration. The microbial richness and diversity at different MgO NPs concentrations obviously varied at the phylum, class and genus levels due to the biological toxicity of MgO NPs.

Relationship between electrogenic performance and physiological change of four wetland plants in constructed wetland-microbial fuel cells during non-growing seasons

To find suitable wetland plants for constructed wetland-microbial fuel cells (CW-MFCs), four commonly used wetland plants, including Canna indica, Cyperus alternifolius L., Acorus calamus, and Arundo donax, were investigated for their electrogenic performance and physiological changes during non-growing seasons. The maximum power output of 12.82mW/m² was achieved in the A. donax CW-MFC only when root exudates were being released. The results also showed that use of an additional carbon source could remarkably improve the performance of electricity generation in the C. indica and A. donax CW-MFCs at relatively low temperatures (2-15°C). However, A. calamus withered before the end of the experiment, whereas the other three plants survived the winter safely, although their relative growth rate values and the maximum quantum yield of PSII (Fv/Fm) significantly declined, and free proline and malondialdehyde significantly accumulated in their leaves. On the basis of correlation analysis, temperature had a greater effect on plant physiology than voltage. The results offer a valuable reference for plant selection for CW-MFCs.

Constructed Wetland-Microbial Fuel Cells for Sustainable Greywater Treatment

Greywater reuse through decentralized and low-cost treatment systems emerges as an opportunity to tackle the existing demand for water. In recent years, constructed wetlands (CW) systems and microbial fuel cells (MFCs) have emerged as attractive technologies for sustainable wastewater treatment. In this study, constructed wetland microbial fuel cells (CW-MFCs) planted with Phragmites australis were tested to evaluate the potential of combining these two systems for synthetic greywater treatment and energy recovery. Open (CW) and closed circuit (CW-MFCs) reactors were operated for 152 days to evaluate the effect of energy recovery on the removal of soluble chemical oxygen demand (sCOD), nutrients and total suspended solids (TSS). Results indicate no significant differences for sCOD and phosphate removal efficiencies. CW-MFCs and CW reactors presented sCOD removal efficiency of 91.7 ± 5.1% and 90 ± 10% and phosphate removal efficiencies of 56.3 ± 4.4% and 61.5 ± 3.5%, respectively. Nitrate removal efficiencies were higher in CW: 99.5 ± 1% versus 86.5 ± 7.1% in CW-MFCs, respectively. Energy generation reached a maximum power density of 33.52 ± 7.87 mW m−3 and 719.57 ± 67.67 mW m−3 at a poised anode potential of −150 mV vs. Ag/AgCl. Thus, our results suggest that the incorporation of MFC systems into constructed wetlands does allow energy recovery while providing effective greywater treatment.