Development and performance evaluation of an algal biofilm reactor for treatment of multiple wastewaters and characterization of biomass for diverse applications

A comparative study on the treatment of kitchen grey water using microalgae consortia and microalgae-synthesized silver nanoparticles

Comparative study on the potential of microalgae consortia and green-synthesized silver nanoparticles using microalgae (M-AgNP) consortia for the treatment of kitchen grey water was investigated in this study. The microalgae consortia consisting of four species, viz., Chlorella sp., Scenedesmus sp., Coelastrum sp., and Pediastrum sp. were isolated from a local fish pond and the silver nanoparticles were synthesized with the same. Thus, synthesized silver nanoparticles exhibited a distinctive yellowish-brown colour and spherical morphology. Extensive qualitative and quantitative characterization techniques were employed to determine their size and morphology. Both microalgae consortia and M-AgNP were used separately for the treatment of kitchen grey water under experimental conditions. The synthesized silver nanoparticles demonstrated promising potential for domestic wastewater treatment, leading to substantial reductions in various parameters: total dissolved solids (29.6%), conductivity (49.4%), chemical oxygen demand (64.6%), and heavy metals (arsenic-63.5%, zinc-45.6%, cadmium-88%, copper-60.52%, and lead-80.82%). Notably, microalgae exhibited superior removal efficiency for nitrate (83.1%), sulphate (70.3%), and phosphate (96.5%) compared to microalgae-synthesized silver nanoparticles. This study underscores the effective utilization of both microalgae and microalgae-synthesized silver nanoparticles for wastewater treatment applications.

A Holistic Approach to Circular Bioeconomy Through the Sustainable Utilization of Microalgal Biomass for Biofuel and Other Value-Added Products

Emissions from transportation and industry primarily cause global warming, leading to floods, glacier melt, and rising seas. Widespread greenhouse gas emissions and resulting global warming pose significant risks to the environment, economy, and society. The need for alternative fuels drives the development of third-generation feedstocks: microalgae, seaweed, and cyanobacteria. These microalgae offer traits like rapid growth, high lipid content, non-competition with human food, and growth on non-arable land using brackish or waste water, making them promising for biofuel. These unique phototrophic organisms use sunlight, water, and carbon dioxide (CO2) to produce biofuels, biochemicals, and more. This review delves into the realm of microalgal biofuels, exploring contemporary methodologies employed for lipid extraction, significant value-added products, and the challenges inherent in their commercial-scale production. While the cost of microalgae bioproducts remains high, utilizing wastewater nutrients for cultivation could substantially cut production costs. Furthermore, this review summarizes the significance of biocircular economy approaches, which encompass the utilization of microalgal biomass as a feed supplement and biofertilizer, and biosorption of heavy metals and dyes. Besides, the discussion extends to the in-depth analysis and future prospects on the commercial potential of biofuel within the context of sustainable development. An economically efficient microalgae biorefinery should prioritize affordable nutrient inputs, efficient harvesting techniques, and the generation of valuable by-products.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Treatment of mixed wastewater by vertical rotating microalgae-bacteria symbiotic biofilm reactor

A novel vertical rotating microalgae-bacteria symbiotic biofilm reactor was built to treat the mixed wastewater containing municipal and soybean soaking wastewater. The reactor was operated in both sequential batch and semi-continuous modes. Under the sequential batch operation mode, the maximum removal rates for Chemical Oxygen Demand (COD), Total Nitrogen (TN), Total Phosphorus (TP), and Ammonia Nitrogen (NH4+-N) of the mixed wastewater were 95.6 %, 96.1 %, 97.6 %, and 100 %, respectively. During the semi-continuous operation, the water discharge indices decreased gradually and eventually stabilized. At stabilization, the removal rates of COD, TN, and NH4+-N achieved 98 %, 95 %, and 99.9 %, respectively. The maximum biomass productivity of the biofilm was 2.69 g·m-2·d-1. Additionally, the carbohydrate, protein and lipid comprised approximately 22 %, 51 % and 10 % of the dry weight of Chlorella. This study demonstrates the great potential of the microalgae-bacteria symbiotic biofilm system to treat food and domestic wastewater while harvesting microalgal biomass.

Enhancing sustainability through microalgae cultivation in urban wastewater for biostimulant production and nutrient recovery

Microalgae can produce biostimulants in form of phytohormones, which are compounds that, even if applied in low concentrations, can have stimulant effects on plants growth and can enhance their quality and their resistance to stress. Considering that microalgal biomass can grow recovering nutrients from wastewater, this circular approach allows to use residues for the production of high added value compounds (such as phytohormones) at low cost. The interest on biostimulants production from microalgae have recently raised. Scientists are focused on the direct application of these cellular extracts on plants, while the number of studies on the identification of bioactive molecules, such as phytohormones, is very scarce. Two cyanobacteria strains (Synechocystis sp. (SY) and Phormidium sp. (PH)) and a chlorophyte (Scenedesmus sp. (SC)) were cultured in laboratory-scale PBRs with a working volume of 2.5 L in secondary urban wastewater varying N:P ratio in the cultures to obtain the highest productivity. The variation of N:P ratio affects microalgae growth, and SY and PH presented higher productivities (73 and 48 mg L-1 d, respectively) under higher N:P ratio (> 22:1). Microalgal biomass was freeze-dried and phytohormones content was measured with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The three microalgae showed similar phytohormones profiles, being the auxin (indole-3-acetic acid, IAA) the most abundant (72 ng g-1DW in SY). Proteins were major macronutrient for all strains, reaching 48 %DW in PH culture. To optimize the biostimulants production, a balance between the production of such compounds, biomass productivity and nutrients removal should be taken into consideration. In this sense, SC was the most promising strain, showing the highest N and P removal rates (73 % and 59 %, respectively) while producing phytohormones.

Comparative evaluation of low-cost ceramic membrane and polymeric micro membrane in algal membrane photobioreactor for wastewater treatment

Algal-bacterial membrane photobioreactor (AMPBR) is proven as a highly energy-efficient process for treating domestic wastewater. This study compared the application of polymeric micro-membrane (PMM) and a low-cost ceramic membrane (LCM) to the AMPBR process for treating domestic wastewater with low and high organic pollution levels. Experiments were conducted over 57 days using two PMM-AMPBRs and two LCM-AMPBRs, operating on a 12-h dark/light cycle in a continuous mode. Simulated wastewater containing varying levels of chemical oxygen demand (COD) was fed to reactors for a consistent hydraulic residence time (HRT) of 7 d and a flux rate of 100 L/m2/d. PMM and LCM-AMPBRs demonstrated efficient wastewater treatment capabilities, achieving COD removal rates exceeding 94% and 95% for high and low COD loadings, respectively. PMM-AMPBR achieved 54.1% TN removal at low COD loading, while LCM-AMPBR achieved 57.2%. These removal efficiencies decreased to 45.6% and 47.0% under high COD loading. Total Phosphorus (TP) removal reached 29-33% for PMM-AMPBRs and 21-24% for LCM-AMPBRs, irrespective of COD loading. LCM-AMPBRs showed significantly lower fouling frequency than PMM-AMPBRs. The biomass production rate decreased with increasing COD loading and achieved 40 mg/L/d at low COD loading for both AMPBRs. Net energy return (NER) values for both AMPBRs were close to 0.87, indicating them as energy-efficient processes. Considering the cost-effectiveness and comparable performance, LCM-AMPBR could be a viable alternative to PMM-AMPBR for wastewater treatment, particularly under low COD loading conditions.

Microalgae-based domestic wastewater treatment: a review of biological aspects, bioremediation potential, and biomass production with biotechnological high-value

This review aims to perform an updated bibliographical survey on the cultivation of microalgae in domestic wastewater with a focus on biotechnological aspects. It was verified that the largest number of researches developed was about cultures in microalgae-bacteria consortium and mixed cultures of microalgae, followed by researches referring to the species Chlorella vulgaris and to the family Scenedesmaceae. According to published studies, these microorganisms are efficient in the biological treatment of domestic wastewater, as well as in the production of high value-added biomass, as they are capable of biosorbing the organic and inorganic compounds present in the culture medium, thus generating cells with high levels of lipids, proteins, and carbohydrates. These compounds are of great importance for different industry sectors, such as pharmaceuticals, food, and also for agriculture and aquaculture. In addition, biomolecules produced by microalgae can be extracted for several biotechnological applications; however, most studies focus on the production of biofuels, with biodiesel being the main one. There are also other emerging applications that still require more in-depth research, such as the use of biomass as a biofertilizer and biostimulant in the production of bioplastic. Therefore, it is concluded that the cultivation of microalgae in domestic wastewater is a sustainable way to promote effluent bioremediation and produce valuable biomass for the biobased industry, contributing to the development of technology for the green economy.

Wastewater treatment by using microalgae: Insights into fate, transport, and associated challenges

The remediation of wastewater with microalgae is a new topic that concentrates on devising a cost-effective and environmentally beneficial method. Multiple microalgae and bacterial consortiums have recently been evaluated to determine if they can purify effluent from various sources. Critical to a system's efficacy is its ability to remove nutrients such as nitrogen (N) and phosphorus (P) and heavy metals such as arsenic (As), lead (Pb), and copper (Cu). This study compared traditional wastewater treatment systems to microalgae-based systems for treating different types of wastewater. The research investigates the potential for microalgae to cleanse wastewater. The research also evaluates wastewater parameters, methods, and scientific techniques for extracting nutrients and heavy metals from polluted water. According to the literature, Microalgae can remove between 98.7% and 100% of nitrogen (N), phosphorous (P), and heavy metals from various effluents. The paper concludes by discussing the difficulties of using microalgae to remediate wastewater. The elimination of nutrients from the effluent is influenced by biomass production, osmotic capacity, temperature, pH, and O2 concentration. Therefore, a "pilot" study is recommended to investigate contaminants.

Effect of different size microplastic particles on the construction of algal-bacterial biofilms and microbial communities

Algal-bacterial symbiotic system is a biological purification system that combines sewage treatment with resource utilization and has the dual effects of carbon sequestration and pollution reduction. In this study, an immobilized algal-bacterial biofilm system was constructed for the treatment of natural sewage. Effects of exposure to microplastics (MPs) with different particle diameters (0.065 μm, 0.5 μm and 5 μm) were determined in terms of algal biomass recovery efficiency, the composition of extracellular polymeric substances (EPS) and morphologic characteristics. The impacts of MPs on the bacterial diversity and community structure of biofilms were also examined. The metagenomic analysis of key microorganisms and related metabolism pathways involved in system was further investigated. Results showed that following exposure to 5 μm MP, a maximum algal recovery efficiency of 80% was achieved, with a minimum PSII primary light energy conversion efficiency (Fv/Fm ratio) of 0.513. Furthermore, 5 μm MP caused the highest level of damage to the algal-bacterial biofilm, enhancing the secretion of protein-rich EPS. The biofilm morphology became rough and loose following exposure to 0.5 μm and 5 μm MP. Community diversity and richness were significantly high in biofilms exposed to 5 μm MP. Proteobacteria (15.3-24.1%), Firmicutes (5.0-7.8%) and Actinobacteria (4.2-4.9%) were dominant in all groups, with exposure to 5 μm MP resulting in the highest relative abundance for these species. The addition of MPs promoted the related metabolic functions while inhibited the degradation of harmful substances by algal-bacterial biofilms. The findings have environmental significance for the practical application of algal-bacterial biofilms for sewage treatment, providing novel insights into the potential effects of MPs on immobilized algal-bacterial biofilm systems.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

A state of the art review on the co-cultivation of microalgae-fungi in wastewater for biofuel production

The microalgae have a great potential as the fourth generation biofuel feedstock to deal with energy crisis, but the cost of production and biomass harvest are the major hurdles in terms of large scale production and applications. Using filamentous fungi to culture targeted alga for biomass accumulation and eventually harvesting is a sustainable way to mitigate environmental impacts. Microalgal co-culture method could be an alternative to overcome limitations and increase biomass yield and lipid accumulation. It was found to be the high feasibility for the production of biofuels from fungi and microalgae using wastewater. This article aimed to state the synergistic approaches, their culture protocols, harvesting procedure and their potential biotechnological applications. Additionally, algal-fungal consortia could digest cellulosic biomass, potentially reducing operating costs as part of industrial need. As a result of co-cultivation, biofuel production could be economically feasible owing to its excellent ability to treat wastewater and be eco-friendly. The implications of the innovative co-cultivation technology have demonstrated the potential for further development based on the policies that have been supported and implemented.

Characterization and evaluation of substratum material selection for microalgal biofilm cultivation

Biofilm cultivation is considered a promising method to achieve higher microalgae biomass productivity with less water consumption and easier harvest compared to conventional suspended cultivation. However, studies focusing on the selection of substratum material and optimization of the growth of certain microalgae species on specific substratum are limited. This study investigated the selection of membranous and fabric fiber substrata for the attachment of unicellular microalgae Scenedesmus dimorphus and filamentous microalgae Tribonema minus in biofilm cultivation. The results indicated that both algal species preferred hydrophilic membranous substrata and nitrate cellulose/cellulose acetate membrane (CN-CA) was selected as a suitable candidate on which the obtained biomass yields were up to 10.24 and 7.81 g m^-2 day^-1 for S. dimorphus and T. minus, respectively. Furthermore, high-thread cotton fiber (HCF) and low-thread polyester fiber (LPEF) were verified as the potential fabric fiber substrata for S. dimorphus (5.42 g m^-2 day^-1) and T. minus (5.49 g m^-2 day^-1) attachment, respectively. The regrowth of microalgae biofilm cultivation strategy was applied to optimize the algae growth on the fabric fiber substrata, with higher biomass density and shear resistibility achieved for both algal species. The present data highlight the importance to establish the standards for selection the suitable substratum materials in ensuring the high efficiency and sustainability of the attached microalgal biomass production. KEY POINTS: • CN-CA was suitable membranous substratum candidate for algal biofilm cultivation. • HCF and LPEF were potential fabric fiber substrata for S. dimorphus and T. minus. • Regrowth biofilm cultivation was effective in improving algal biomass and attachment.

Process Technologies of Cyanobacteria

Although the handling and exploitation of cyanobacteria is associated with some challenges, these phototrophic bacteria offer great opportunities for innovative biotechnological processes. This chapter covers versatile aspects of working with cyanobacteria, starting with up-to-date in silico and in vitro screening methods for bioactive substances. Subsequently, common conservation techniques and vitality/viability estimation methods are compared and supplemented by own data regarding the non-invasive vitality evaluation via pulse amplitude modulated fluorometry. Moreover, novel findings about the influence the state of the pre-cultures have on main cultures are presented. The following sub-chapters deal with different photobioreactor-designs, with special regard to biofilm photobioreactors, as well as with heterotrophic and mixotrophic cultivation modes. The latter topic provides information from literature on successfully enhanced cyanobacterial production processes, augmented by own data.

Mixotrophic microalgal-biofilm reactor augmenting biomass and biofuel productivity

The present work aimed to evaluate the mixotrophic growth of Chlorella pyrenoidosa in a microalgal-biofilm reactor (MBR) using waste glycerol as an organic carbon source. The biomass productivity of C. pyrenoidosa (10.14 g m^-2 d^-1) under the mixotrophic mode was remarkably higher than that observed during the phototrophic mode (4.16 g m^-2 d^-1), under similar incubation conditions. The hydraulic retention time (HRT) of 6 d was found optimal for the higher productivity of microalgae in the MBR. Notably, based on biofuel quality, mixotrophically grown microalgal biomass was noted to have better suitability for biomethane production compared to biodiesel. Besides, up to 98.09, 75.74, and 55.86% removal of phosphate, nitrate, and COD, respectively, was recorded within 6 d under mixotrophic growth. Overall, the present findings magnificently demonstrate the efficient recycling of waste glycerol for higher biomass production coupled with phycoremediation using mixotrophic MBR.

Sustainability and carbon neutrality trends for microalgae-based wastewater treatment: A review

As the global economy develops and the population increases, greenhouse gas emissions and wastewater discharge have become inevitable global problems. Conventional wastewater treatment processes produce direct or indirect greenhouse gas, which can intensify global warming. Microalgae-based wastewater treatment technology can not only purify wastewater and use the nutrients in wastewater to produce microalgae biomass, but it can also absorb CO₂ in the atmosphere or flue gas through photosynthesis, which demonstrates great potential as a sustainable and economical wastewater treatment technology. This review highlights the multifaceted roles of microalgae in different types of wastewater treatment processes in terms of the extent of their bioremediation function and microalgae biomass production. In addition, various newly developed microalgae cultivation systems, especially biofilm cultivation systems, were further characterized systematically. The performance of different microalgae cultivation systems was studied and summarized. Current research on the technical approaches for the modification of the CO₂ capture by microalgae and the maximization of CO₂ transfer and conversion efficiency were also reviewed. This review serves as a useful and informative reference for the application of wastewater treatment and CO₂ capture by microalgae, aiming to provide a reference for the realization of carbon neutrality in wastewater treatment systems.

Understanding photosynthetic biofilm productivity and structure through 2D simulation

We present a spatial model describing the growth of a photosynthetic microalgae biofilm. In this 2D-model we consider photosynthesis, cell carbon accumulation, extracellular matrix excretion, and mortality. The rate of each of these mechanisms is given by kinetic laws regulated by light, nitrate, oxygen and inorganic carbon. The model is based on mixture theory and the behaviour of each component is defined on one hand by mass conservation, which takes into account biological features of the system, and on the other hand by conservation of momentum, which expresses the physical properties of the components. The model simulates the biofilm structural dynamics following an initial colonization phase. It shows that a 75 μm thick active region drives the biofilm development. We then determine the optimal harvesting period and biofilm height which maximize productivity. Finally, different harvesting patterns are tested and their effect on biofilm structure are discussed. The optimal strategy differs whether the objective is to recover the total biofilm or just the algal biomass.

Microalgae have many industrial applications, ranging from aquaculture, pharmaceutics, food industry to green energy. Planktonic cultivation of microalgae is energy-consuming. Growing them under a biofilm form is a new trend with attracting promises. Biofilms are complex heterogeneous ecosystems composed of microorganisms embedded within a self-produced extracellular matrix and stuck to a surface. Most of the studies have focused on bacterial biofilms and knowledge about microalgae biofilms is still very limited. In this paper, we propose a mathematical model describing microalgae biofilm development. We simulate in 1D and 2D the impact of harvesting conditions on biofilm productivity. In agreement with available experimental observations, we find that there exist optimal frequencies and patterns that optimize the productivity. We also show that the optimal conditions differ whether for maximizing the productivity of microalgae or of the whole biofilm.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Microalgae as a solution of third world energy crisis for biofuels production from wastewater toward carbon neutrality: An updated review

The boost of the greenhouse gases (GHGs, largely carbon dioxide - CO₂) emissions owing to anthropogenic activity is one of the biggest global threats. Bio-CO₂ emission reduction has received more and more attention as an environmentally sustainable approach. Microalgae are very popular in this regard because of excellent speed of growth, low costs of production, and resistance to extreme environments. Besides, most microalgae can undergo photosynthesis, where the CO₂ and solar energy can be converted into sugar, and subsequently become biomass, providing a renewable and promising biofuel strategy with a few outstanding benefits. This review focuses on presenting CO₂ sequestration by microalgae towards wastewater treatment and biodiesel production. First, the CO₂ fixation mechanism by microalgae viz., sequestration and assimilation of CO₂ in green microalgae as well as cyanobacteria were introduced. Besides, factors affecting CO₂ sequestration in microalgae, containing microalgae species and cultivation conditions, such as light condition, photobioreactor, configuration, pH, CO₂ concentration, temperature, and medium composition, were then comprehensively discussed. Special attention was given to the production of biodiesel as third-generation biofuel from various wastewater (CO₂ biofixation), including processing steps of biodiesel production by microalgae, biodiesel production from wastewater, and improved methods. Furthermore, current life cycle assessment (LCA) and techno-economic analysis (TEA) used in biodiesel production were discussed. Finally, the research challenges and specific prospects were considered. Taken together, this review provides useful and updated information to facilitate the development of microalgal "green chemistry" and "environmental sustainability".

Progress and challenges of contaminate removal from wastewater using microalgae biomass

The utilization of microalgae in treating wastewater has been an emerging topic focussed on finding an economically sustainable and environmentally friendly approach to treating wastewater. Over the last several years, different types of con microalgae and bacteria consortia have been experimented with to explore their potential in effectively treating wastewater from different sources. The basic features considered while determining efficiency is their capacity to remove nutrients including nitrogen (N) and phosphorus (P) and heavy metals like arsenic (As), lead (Pb), and copper (Cu). This paper reviews the efficiency of microalgae as an approach to treating wastewater from different sources and compares conventional and microalgae-based treatment systems. The paper also discusses the characteristics of wastewater, conventional methods of wastewater treatment that have been used so far, and the technological mechanisms for removing nutrients and heavy metals from contaminated water. Microalgae can successfully eliminate the suspended nutrients and have been reported to successfully remove N, P, and heavy metals by up to 99.6 %, 100 %, and 13%-100 % from different types of wastewater. However, although a microalgae-based wastewater treatment system offers some benefits, it also presents some challenges as outlined in the last section of this paper. Performance in eliminating nutrients from wastewater is affected by different parameters such as temperature, biomass productivity, osmotic ability, pH, O₂ concentration. Therefore, the conducting of pilot-scale studies and exploration of the complexities of contaminants under complex environmental conditions is recommended.

Research advancement and commercialization of microalgae edible oil: a review

The global food crisis has led to a great deal of attention being given to microalgal oil as a sustainable natural food source. This article provides an overview of the progress and future directions in promoting the commercialization of microalgal edible oils, including microalgal triglyceride accumulation, suitable edible oil culture strategies for high nutritional value, metabolic engineering, production, and downstream technologies. The integration of the production process, biosafety, and the economic sustainability of microalgal oil production are analyzed for their critical roles in the commercialization of microalgal edible oil to provide a theoretical and scientific basis for the comprehensive development and utilization of microalgal edible oil. © 2021 Society of Chemical Industry.

Assuaging Microalgal Harvesting Woes via Attached Growth: A Critical Review to Produce Sustainable Microalgal Feedstock

Third-generation biofuels that are derived from microalgal biomass have gained momentum as a way forward in the sustainable production of biodiesel. Such efforts are propelled by the intention to reduce our dependence on fossil fuels as the primary source of energy. Accordingly, growing microalgal biomass in the form of suspended cultivation has been a conventional technique for the past few decades. To overcome the inevitable harvesting shortcomings arising from the excessive energy and time needed to separate the planktonic microalgal cells from water medium, researchers have started to explore attached microalgal cultivation systems. This cultivation mode permits the ease of harvesting mature microalgal biomass, circumventing the need to employ complex harvesting techniques to single out the cells, and is economically attractive. However, the main bottleneck associated with attached microalgal growth is low biomass production due to the difficulties the microalgal cells have in forming attachment and populating thereafter. In this regard, the current review encompasses the novel techniques adopted to promote attached microalgal growth. The physicochemical effects such as the pH of the culture medium, hydrophobicity, as well as the substratum surface properties and abiotic factors that can determine the fate of exponential growth of attached microalgal cells, are critically reviewed. This review aims to unveil the benefits of an attached microalgal cultivation system as a promising harvesting technique to produce sustainable biodiesel for lasting applications.

Valorization of swine wastewater in a circular economy approach: Effects of hydraulic retention time on microalgae cultivation

To optimize the swine wastewater (SWW) treatment, this study investigated different hydraulic retention times (HRTs) for microalgae cultivation. For this purpose, five pilot-scale reactors operated in semi-continuous flow, with HRTs equal to 9, 12, 15, 18, 21 days were evaluated in terms of SWW polishing and biomass production. The effluent treatment was discussed accompanied by principal component analysis, which allowed identification of causes of variance in the data set, ideal for studies with real effluent and influenced by environmental conditions. All reactors show satisfactory removals of N-NH₄⁺ (91.6-95.3%), COD (15.8-39.9%), DO increment (in average 7.5 mg O₂/L) and, only the longest HRT (21 days) was able to remove Ps (21%). The results obtained indicated that a consortium of microalgae and bacteria was developed for all the tested HRTs. On the other hand, HRT = 12 days provided a healthier culture of photosynthesizing organisms (chl-a/VSS = 3.04%). Carbohydrates (20.8-31.3%) and proteins (2.7-16.2%) were the compounds of commercial interest in the highest proportion in the biomass of all reactors, with contents comparable to that of terrestrial crops. Thus, it was suggested a valorization route of these compounds of high added value to return to pig farming, where the nutrients were intended to supplement the swine feed and clarified water for cleaning the pig stalls. Thus, in the circular economy context, this research contributes to water footprint reduction and the sustainability of the pig farming production chain. The economic and environmental analysis of the route is suggested to enable its implementation on a large scale, as well as further technical feasibility research (reactor types, exposure to external environment, evaluation of pathogen removal and animal feed supplementation from SWW microalgae biomass).

Recent advancements in the biological treatment of high strength ammonia wastewater

The estimated global population growth of 81 million people per year, combined with increased rates of urbanization and associated industrial processes, result in volumes of high strength ammonia wastewater that cannot be treated in a cost-effective or sustainable manner using the floc-based conventional activated sludge approach of nitrification and denitrification. Biofilm and aerobic granular sludge technologies have shown promise to significantly improve the performance of biological nitrogen removal systems treating high strength wastewater. This is partly due to enhanced biomass retention and their ability to sustain diverse microbial populations with juxtaposing growth requirements. Recent research has also demonstrated the value of hybrid systems with heterogeneous bioaggregates to mitigate biofilm and granule instability during long-term operation. In the context of high strength ammonia wastewater treatment, conventional nitrification-denitrification is hampered by high energy costs and greenhouse gas emissions. Anammox-based processes such as partial nitritation-anammox and partial denitrification-anammox represent more cost-effective and sustainable methods of removing reactive nitrogen from wastewater. There is also growing interest in the use of photosynthetic bacteria for ammonia recovery from high strength waste streams, such that nitrogen can be captured and concentrated in its reactive form and recycled into high value products. The purpose of this review is to explore recent advancements and emerging approaches related to high strength ammonia wastewater treatment.

Empowering blue economy: From underrated ecosystem to sustainable industry

With increasing demand for resources to achieve global food-water-energy nexus and rapid decline in land-based sources, oceans represent both solution and boost to sustainable environment and economy. In addition to fundamental part of earth's ecosystem for uncatalogued diversity of life, oceans are undervalued economy powerhouse with gross marine product value. With sustainable management of existing assets including shipping, transportation, manufacturing, fisheries, tourism and exploration of new business like marine biotechnology and renewable energy, the ocean or blue economy has potential to fulfill sustainable development goals (SDG). In spite of recognition of blue economy as a new economic frontier, investments by existing industries and emergence of new ones are limited and less known, hence require more in depth attention and scientific understanding. In the present study, authors present a systematic comparative assessment of blue economy sectors with distinct challenges and strategies to be further explored and implemented for industrial deployment. The conceptualization of integrated routes of bio(economy) by the current study can act as gateway for key stakeholders, i.e. governance, bluepreneurs (scientists and industries) to prioritize technologies for sustainable applications of marine resources.

Integrating micro-algae into wastewater treatment: A review

Improving the ecological status of water sources is a growing focus for many developed and developing nations, in particular with reducing nitrogen and phosphorus in wastewater effluent. In recent years, mixotrophic micro-algae have received increased interest in implementing them as part of wastewater treatment. This is based on their ability to utilise organic and inorganic carbon, as well as inorganic nitrogen (N) and phosphorous (P) in wastewater for their growth, with the desired results of a reduction in the concentration of these substances in the water. The aim of this review is to provide a critical account of micro-algae as an important step in wastewater treatment for enhancing the reduction of N, P and the chemical oxygen demand (COD) in wastewater, whilst utilising a fraction of the energy demand of conventional biological treatment systems. Here, we begin with an overview of the various steps in the treatment process, followed by a review of the cellular and metabolic mechanisms that micro-algae use to reduce N, P and COD of wastewater with identification of when the process may potentially be most effective. We also describe the various abiotic and biotic factors influencing micro-algae wastewater treatment, together with a review of bioreactor configuration and design. Furthermore, a detailed overview is provided of the current state-of-the-art in the use of micro-algae in wastewater treatment.

Innovative microalgae biomass harvesting methods: Technical feasibility and life cycle analysis

In order to ease one of the main challenges of biomass production in wastewater, the harvest stage, this study proposes as main innovations: the comparison of technical and environmental performance of different methods of harvesting biomass which have not been addressed in the literature and the projection of an optimal environmental scenario for biomass harvesting. For this, three harvesting methods were evaluated and compared, namely the gravitational sedimentation (GS) via settling tank, coagulation with tannin followed by gravitational sedimentation (TC/GS), and a biofilm reactor operated in parallel with a settling tank (BR/GS). TC/GS required less time to concentrate the biomass (121.13 g/day); however, the biomass had a higher moisture content (99.02%), which may compromise its direct application for production of most bioproducts and bioenergy, only a dewatering step is recommended. The harvesting methods interfered in biomass characterisation, mainly in carbohydrate content, which was higher in biomass concentrated over time (28-37%) than biomass concentrated in a single day by coagulation (13.8%). The results of the life cycle assessment revealed that in scenarios which included TC/GS methods and the BR/GS presented less environmental impact in relation to only GS. Additionally, the combination of these two methods comprises the best scenario and promises to optimise the harvest of biomass grown in wastewater.

Innovative hybrid system for wastewater treatment: High-rate algal ponds for effluent treatment and biofilm reactor for biomass production and harvesting

The use of algal biomass still faces challenges associated with the harvesting stages. To address this issue, we propose an innovative hybrid system, in which a biofilm reactor (BR) operates as an algal biomass production and harvesting unit connected to a high-rate algal pond (HRAP), a wastewater treatment unit. BR did not interfered with the biomass chemical composition (protein = 32%, carbohydrates = 11% and total lipids = 18%), with the wastewater treatment (removals efficiency: chemical oxygen demand = 59%, ammonia nitrogen = 78%, total phosphorus = 16% and Escherichia coli = 1 log unit), and did not alter the sedimentation characteristics of the biomass (sludge volume index = 29 mg/L and humidity content = 92%) in the secondary settling tank of the hybrid system. On the other hand, the results showed that this technology achieved a biomass production about 2.6x greater than the conventional system without a BR, and the efficiency of harvesting of the hybrid system was 61%, against 22% obtained with the conventional system. In addition, the BR promoted an increase in the density (~1011 org/m²) and diversity of microalgae in the hybrid system. Chlorella vulgaris was the most abundant species (>60%) from the 4th week of operation until the end of the experiment. Hence, results confirm that the integration of BR into a wastewater treatment plant optimised the production and harvesting of biomass of the hybrid system, making it a promising technology. The importance of economic and environmental analysis studies of BR is highlighted in order to enable its implementation on a large scale.

A Novel System for Real-Time, In Situ Monitoring of CO2 Sequestration in Photoautotrophic Biofilms

Climate change brought about by anthropogenic CO₂ emissions has created a critical need for effective CO₂ management solutions. Microalgae are well suited to contribute to efforts aimed at addressing this challenge, given their ability to rapidly sequester CO₂ coupled with the commercial value of their biomass. Recently, microalgal biofilms have garnered significant attention over the more conventional suspended algal growth systems, since they allow for easier and cheaper biomass harvesting, among other key benefits. However, the path to cost-effectiveness and scaling up is hindered by a need for new tools and methodologies which can help evaluate, and in turn optimize, algal biofilm growth. Presented here is a novel system which facilitates the real-time in situ monitoring of algal biofilm CO₂ sequestration. Utilizing a CO₂-permeable membrane and a tube-within-a-tube design, the CO₂ sequestration monitoring system (CSMS) was able to reliably detect slight changes in algal biofilm CO₂ uptake brought about by light–dark cycling, light intensity shifts, and varying amounts of phototrophic biomass. This work presents an approach to advance our understanding of carbon flux in algal biofilms, and a base for potentially useful innovations to optimize, and eventually realize, algae biofilm-based CO₂ sequestration.

A review of biochemical and thermochemical energy conversion routes of wastewater grown algal biomass

Microalgae are recognized as a potential source of biomass for obtaining bioenergy. However, the lack of studies towards economic viability and environmental sustainability of the entire production chain limits its large-scale application. The use of wastewaters economizes natural resources used for algal biomass cultivation. However, desirable biomass characteristics for a good fuel may be impaired when wastewaters are used, namely low lipid content and high ash and protein contents. Thus, the choice of wastewaters with more favorable characteristics may be one way of obtaining a more balanced macromolecular composition of the algal biomass and therefore, a more suitable feedstock for the desired energetic route. The exploration of biorefinery concept and the use of wastewaters as culture medium are considered as the main strategic tools in the search of this viability. Considering the economics of overall process, direct utilization of wet biomass using hydrothermal liquefaction or hydrothermal carbonization and anaerobic digestion is recommended. Among the explored routes, anaerobic digestion is the most studied process. However, some main challenges remain as little explored, such as a low energy pretreatment and suitable and large-scale reactors for algal biomass digestion. On the other hand, thermochemical conversion routes offer better valorization of the algal biomass but have higher costs. A biorefinery combining anaerobic digestion, hydrothermal carbonization and hydrothermal liquefaction processes would provide the maximum possible output from the biomass depending on its characteristics. Therefore, the choice must be made in an integrated way, aiming at optimizing the quality of the final product to be obtained. Life cycle assessment studies are critical for scaling up of any algal biomass valorization technique for sustainability. Although there are limitations, suitable integrations of these processes would enable to make an economically feasible process which require further study.

Effects of bacterial inoculation and nitrogen loading on bacterial-algal consortium composition and functions in an integrated photobioelectrochemical system

An integrated photo-bioelectrochemical system (IPB) for wastewater treatment combines a microbial fuel cell with an algal bioreactor, eliminating requirements for aeration, promoting electricity generation, remediating nutrients and producing algal biomass for conversion into biofuel or other bioproducts. To examine strategies for improving IPB functions of electrochemical output and nutrient removal efficiency, this study tested effects of cathode bacterial inoculation and nitrogen loading on cathode microbial community and IPB performance. IPB cathodes were inoculated with the green alga Chlorella vulgaris, in combination with nitrite-oxidizing bacteria (NOB) Nitrobacter winogradskyi, and/or ammonium-oxidizing bacteria (AOB) Nitrosomonas europaea. IPB performance was examined before and after nitrifying bacteria inoculations and under three ammonium loading concentrations in the wastewater medium. Bacterial communities in the cathode suspension and biofilm were examined by 16S rRNA gene sequence analysis. Relative to the algae only control, cathode inoculation with NOB and/or AOB improved net nutrient removal, but resulted in reduced dissolved oxygen availability, which impaired electricity generation. Higher ammonium loading increased electricity production and nutrient removal, possibly by overcoming algal-bacterial competition. Inoculation with nitrifying bacteria resulted in minor changes to total bacterial composition and AOB or NOB comprised <3% of total sequences after 1 month. Community composition changed more dramatically following increase in ammonium-N concentration from 40 to 80 mg L^-1. Manipulation of N loading could be a useful strategy to improve IPB performance, while inoculation of AOB or NOB may be beneficial for treatment of water with high ammonium loading when N removal is the primary system goal.

Removal of total dissolved solids from wastewater using a revolving algal biofilm reactor

Total dissolved solids (TDS) comprising inorganic salts and organic matters are pollutants of concern to aquatic systems and water for human use. This work aimed to investigate the use of revolving algal biofilm (RAB) reactors as a sustainable and environmental friendly method to remove TDS from industrial effluents and municipal wastewaters. The wastewaters contained chloride, sodium, potassium, calcium, magnesium, and sulfate as the major components. The RAB reactors fed with synthetic industrial effluent with high TDS level demonstrated the best algal growth, with the highest TDS removal efficiency (27%) and removal rate (2,783 mg/L-day and 19,530 mg/m² -day). A suspended algal culture system only removed 3% TDS from the same wastewater. The TDS removal by the RAB reactors was considered due to several mechanisms such as absorption by the algae cells, adsorption by extracellular polymeric substance of the biofilm, and/or precipitation. Collectively, this research shows that the RAB reactors can serve as an efficient system in wastewater remediation for TDS removal. PRACTITIONER POINTS: Total dissolved solids (TDS) in wastewater are pollutants of concern. The RAB reactors can remove TDS from various types of wastewater. The RAB reactors removed TDS by adsorbing ions elements such as Cl, Na, K, Ca, Mg, and S. The algal biomass absorbs ions through extracellular polymeric substance.

Comparative study on attached-growth photobioreactors under blue and red lights for treatment of septic tank effluent

Attached-growth photobioreactors (AG-PBRs) employing low-cost attached-growth media were applied to treat septic tank effluent which contained abundant organic and nutrient matters as well as pathogenic microorganisms. This study investigated effects of blue and red LED lights on organic, nutrient and pathogenic removals, biomass productivity and compositions of microbial community in the AG-PBR system. The experimental results showed the blue AG-PBR to be more effective in removing chemical oxygen demand (COD), total nitrogen (TN) and ammonia nitrogen (NH₃-N) and generating biomass productivity than those of the red AG-PBR (P < 0.05). Mass balance analysis indicated that the TN and total phosphorus (TP) were removed mainly by assimilation into the biomass. The TN removal rates via nitrification and denitrification processes in the blue AG-PBR were found to be higher than that of the red AG-PBR, corresponding to the observed results of bacterial biomass and abundances of nitrifying and denitrifying bacterial species in the treatment systems. The maximal areal algal biomass productivity of 47 gDW/(m². d) in the blue AG-PBRs was found to be higher than those of other algal attached-growth systems. Although, the red and blue AG-PBR systems could effectively treat the septic tank effluent to meet the national and international discharge standards, based on treatment efficiencies and biomass productivity, the blue AG-PBR is recommended for treatment of septic tank effluent.

Cultivation of Oily Microalgae for the Production of Third-Generation Biofuels

Biofuel production by oleaginous microalgae is a promising alternative to the conventional fossil fuels. Many microalgae species have been investigated and deemed as potential renewable sources for the production of biofuel, biogas, food supplements and other products. Oleaginous microalgae, named for their ability to produce oil, are reported to store 30–70% of lipid content due to its metabolic properties under nutrient starvation conditions. This review presents the assortment of the research studies focused on biofuel production from oleaginous microalgae. The new methods and technologies developed for oleaginous microalgae cultivation to improve their biomass content and lipid accumulation capacity were reviewed. The production of renewable, carbon neutral, bio-based or microalgae-based transport fuels are necessary for environmental protection and economic sustainability. Microalgae are a significant source of renewable biodiesel because of their ability to produce oils in the presence of sunlight more efficiently than that of crop oils. This review will provide the background to understanding the bottlenecks and the need for improvement in the cultivation or harvesting process for oleaginous microalgae.

Effect of light conditions on mixotrophic cultivation of green microalgae

Current research aimed to increase mixotrophic biomass from various organic carbon sources by exploring best light conditions. Three substrates glucose, acetic acid and glycerol were studied for their effects on mixotrophic microalgae cultivation under four light conditions. Light irradiance exhibited variability in growth response and photosynthetic efficiency based on type of substrates used in mixotrophic growth. Each substrate showed variability in light requirements for their effective assimilations. From growth responses, glucose and acetic acid respectively exhibited heterotrophic and mixotrophic (better growth in light) natures. Continuous light-deficient condition was adequate for effective mixotrophic growth as well as energy saving for glucose. However, light-sufficient condition required for effective acetic acid supported mixotrophic growth. Mixotrophic benefits from glycerol and its uptake by Chlorella protothecoides was negligible in all light conditions. Investigation of heterotrophic biomass contribution by various substrates in overall mixotrophic yield, glucose offered maximum approx. 43% contribution.

Mixotrophic Microalgae Biofilm: A Novel Algae Cultivation Strategy for Improved Productivity and Cost-efficiency of Biofuel Feedstock Production

In this work, we studied a novel algae cultivation strategy, mixotrophic microalgae biofilm, to improve the productivity and cost-efficiency of algal biofuel production. In contrast to previous methods, this improved approach can achieve high productivity at low cost by harnessing the benefits of mixotrophic growth’s high efficiency, i.e., capable of subsisting on inorganic and organic carbons thus unaffected by limited light, and microalgae biofilm’s low harvesting cost. Our results, as one of the first studies of this type, proved that microalgae biofilms under mixotrophic condition exhibited significantly higher productivity and quality of biofuel feedstock: 2–3 times higher of biomass yield, 2–10 times higher of lipid accumulation, and 40–60% lower of ash content when compared to microalgae biofilms under autotrophic condition. In addition, we investigated the impact of cell-surface properties (hydrophobicity and roughness) on the growth activities of microalgae biofilms and found that the productivity of mixotrophic biofilms was significantly correlated with the surface hydrophobicity. Finally, our work demonstrated the applicability of integrating this novel cultivation method with wastewater for maximum efficiency. This study opens a new possibility to solve the long-lasting challenges of algal biofuel feedstock production, i.e., low productivity and high cost of algal cultivation.

Operation of a vertical algal biofilm enhanced raceway pond for nutrient removal and microalgae-based byproducts production under different wastewater loadings

In this study, a vertical-algal-biofilm-enhanced raceway pond (VAB-enhanced raceway pond) was designed and assessed for wastewater treatment and algal biomass production under different nutrient loading rates. Results indicated that the maximum removal capacity of the system was accordingly 7.52, 6.76 and 0.11 g·m^-2·day^-1 for COD, TN and TP, under which the wastewater effluent concentration could be respectively reduced from 106.00, 92.71 and 1.48 mg/L to 43.5, 11.03 and 0.46 mg/L in continuous mode. Meanwhile, about 7.47-10.10 t·ha^-1·year^-1 of lipid, 14.85-23.01 t·ha^-1·year^-1 of protein and 10.69-14.20 t·ha^-1·year^-1 of carbohydrate could be produced from the algae by the system in large scale. The corresponding estimated stoichiometric-methane-potential and biodiesel production of the harvested biomass was 21,471-29,136 m³·ha^-1·year^-1 and 0.57-1.15 t·ha^-1·year^-1, respectively. The findings of this study demonstrate the feasibility of using VAB-enhanced raceway pond for economically and cost-effectively recovery of nutrients from the wastewater via algal-based byproducts production.