Biotransformation of sweet lime pulp waste into high-quality nanocellulose with an excellent productivity using Komagataeibacter europaeus SGP37 under static intermittent fed-batch cultivation

Recent progress in nanocellulose-based biocomposites for bone tissue engineering and wound healing applications

Nanocellulose (NC) is considered as promising biomaterial owing to its stiffness, renewability, high strength, and biodegradability. NC is classified into three types such as cellulose nanocrystals (CNCs), bacterial nanocellulose (BNC), and cellulose nanofibers (CNFs), and they differ with each other in terms of size, mechanical behaviour, morphology, and crystallinity. The development of biocomposites with nanocellulose as reinforcing agent has gained much attention among researchers owing to their promising applications in various sectors. The thermal, mechanical, and biodegradable properties of both synthetic and natural polymers can be enhanced by reinforcing them with nanocellulose. The fabrication of NC-based biocomposites can be achieved by employing different techniques such as solution casting, resin impregnation and melt compounding methods. The porosity, tensile modulus, tensile strength, MVTR (moisture-vapour transmission rate), biocompatibility, hydrophilic, water retention ability, bio-adhesiveness and hemocompatibility are the essential properties of tissue engineering scaffolds and wound dressing materials, and these properties can be optimized by reinforcing them with NC. This review intends to focus on the reinforcing effect of NC on the physicochemical and thermo-mechanical characteristics of NC-based biocomposites. This review also aims to summarize the utilization of NC-based biocomposites in tissue engineering scaffolds and wound dressing applications.

High-yield bacterial cellulose production from rice bran using a genetically characterized Komagataeibacter europaeus strain

A high-yielding Komagataeibacter europaeus strain, KFET1, was evaluated for its capacity to utilize rice bran as a cost-effective substrate for bacterial cellulose (BC) production. By employing an optimized enzymatic hydrolysis approach, the yield of rice bran-derived BC (RB-BC) reached 15.67 g/L, a 389.06 % improvement over Hestrin-Schramm-derived BC (HS-BC). RB-BC demonstrated superior nanofiber uniformity, rehydration capacity, and thermal stability, confirmed by FTIR, SEM, DSC, X-ray diffraction, and solid-state NMR analyses. Scale-up fermentation in a 15 L bioreactor achieved a BC yield of 20.69 g/L and a sugar conversion rate of 87.85 %. The high BC yield (20.69 g/L) stems from synergistic interactions between the KFET1 strain's enhanced carbohydrate metabolism (264 genes) and enzymatic hydrolysis-driven nutrient release from rice bran. Economic analysis demonstrated a profit of 1166.42 USD/ton for rice bran medium, significantly exceeding values for Hestrin-Schramm (-153.06 USD/ton) and coconut water (906.33 USD/ton), highlighting rice bran's cost-effectiveness. This study provides an efficient and sustainable strategy for converting agricultural by-products into high-value biomaterials, paving the way for industrial-scale BC production.

Improved bacterial cellulose production by Acetobacter oryzoeni MGC-N8819 in tobacco waste extract coupled with nicotine removal by Pseudomonas sp. JY-Q/5∆

As the substrate, tobacco waste extract (TWE) can produce bacterial cellulose (BC), a biobased material. However, nicotine inhibits BC production (adding 0.8 g/L nicotine to the HS medium had a negative effect on BC synthesis) and needs to be removed. In this study, BC production by Acetobacter oryzoeni MGC-N8819 was carried out in four dilutions (5 %, 10 %, 15 %, and 20 %) of TWE. 15 % TWE without nicotine removal resulting in a 3.27 g/L BC production. Considering the inhibitor effect of nicotine on BC synthesis. Pseudomonas sp. JY-Q/5∆, an efficient nicotine-degrading mutant strain without the ability of glucose consumption, was statically co-cultured with MGCN8819, and the BC production was increased to 4.61 g/L after 7 days of cultivation. To eliminate the limitation of insufficient oxygen supply, BC films were harvested on day 7 and cultured for an additional 5 days resulting in a 6.00 g/L final BC production. Remarkably, the co-culture of MGC-N8819 and JY-Q/5∆ improved BC properties in terms of fiber diameter (28 nm), mechanical properties (tensile strength to 67 MPa and elongation at break to 23 %), and thermal stability (the maximum decomposition temperature was 600 °C). This study suggests a valuable strategy for improving BC production using agricultural waste.

Valorization of papaya fruit peel waste for the production of nanocellulose by Novacetimonas hansenii BMK-3

Nanocellulose is the renewable biopolymer produced in nature by different bacteria. The widespread use of nanocellulose in industrial processes increases the demand for this valuable biomaterial. To overcome the high cost of producing nanocellulose using the Hestrin-Schramm medium, alternative agricultural waste has been studied as a potential low-cost supply. This study investigated the optimization and physicochemical characterization of cellulose membrane obtained, utilizing a low-cost substrate--papaya peel-based medium, with Novacetimonas hansenii BMK-3.The maximum yield of nanocellulose was found at an inoculum age 24 h, inoculum size 10% (v/v), incubation time 15 days, pH 3.5, media:flask volume ratio 1:2.5, and temperature 30°C. Cellulose yield produced using the papaya peel-based medium was nearly four times more than using the Hestrin-Schramm medium. The structural and physical properties of cellulose were characterized using field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and derivative of thermogravimetric analysis. Cellulose produced using papaya peel-based medium had similar properties to cellulose produced in the Hestrin-Schramm medium. The results suggested papaya peels as a cost-effective substrate for cellulose production with enhanced yield. This study reports an eco-friendly approach for the management of papaya peels waste disposal and production of value-added product. This is the first report mentioning the valorization of papaya fruit peel waste for the production of cellulose.

Efficient pectin recovery from sugar beet pulp as effective bio-based coating for Pacific white shrimp preservation

This study demonstrates the valorization of sugar beet pulp (SBP)-derived pectin to produce bio-based coatings for shrimp preservation. Pectin extraction was assessed at varying temperatures and extraction times to achieve tailored properties (high methoxyl-pectins, degree of esterification-DE >79.0 %) leading to 11.5 % extraction yield, 78.1 % galactouronic acid content and 80 % DE at optimal conditions (pH 1.5, 80 °C, 2 h). Pectin-based coatings supplemented with ascorbic acid (AA) (0.5-2.0 %) led to organoleptically acceptable shrimps with significantly lower total color differences during 28-days of storage, compared to uncoated and pectin-coated counterparts. AA-based coatings delayed shrimp melanosis, expressed as reduced polyphenoloxidase activity (48-86 %). Rich-in-holocellulose solids derived after pectin extraction were used for bacterial cellulose (BC) production, pinpointing the SBP potential as a multi-purpose feedstock. Fed-batch fermentation enhanced BC concentration (by 110 %) and productivity (1.6-fold higher) compared to batch-cultures. Pectin produced within a SBP-based biorefinery could be applied as bio-based coating with food packaging potential.

Bacterial nanocellulose by static, static intermittent fed-batch and rotary disc bioreactor-based fermentation routes using economical black tea broth medium: A comparative account

Bacterial nanocellulose was produced here using static, static intermittent-fed batch (SIFB) and rotary disc bioreactor (RDB) mode. Economical black tea broth media with symbiotic consortia of bacteria and yeast (SCOBY) was used towards feasible BNC production (instead of commercial NCIM 2526 strain and conventional HS media). The physicochemical characterization of BNC produced in all three modes via FE-SEM, ATR-FTIR, XRD and TGA results showed a highly porous morphology, mostly Iα form, good crystallinity and thermal stability, respectively. BNC crystallinity lies in the range of 68 % (RDB) to 79.4 % (static and SIFB). Water retention value (86 to 93 %) and moisture content (85 to 93 %) are high for BNC produced in all three modes. Commendable difference in the BNC yield, sugar consumption, conversion yield and residual sugar was observed using different methods. Highest BNC yield 29.4 ± 0.66 gL-1 was obtained under SIFB method as compared to static mode (13.6 ± 0.32 g L-1). Under RDB, a negligible amount of BNC i.e., 1.0 ± 0.2 g L-1 was produced. SCOBY with BTB medium was found unsuitable for BNC production under RDB and needs further investigation. Thus, this comparative study offers a way to produce a commendable amount of low-priced BNC for various techno-industrial usage.

Bacterial valorization of agricultural-waste into a nano-sized cellulosic matrix for mitigating emerging pharmaceutical pollutants: An eco-benign approach

For Bacterial Nanocellulose (BNC) production, standard methods are well-established, but there is a pressing need to explore cost-effective alternatives for BNC commercialization. This study investigates the feasibility of using syrup prepared from maize stalk as a valuable nutrient and sustainable carbon source for BNC production. Our study achieved a remarkable BNC production yield of 19.457 g L-1 by utilizing Komagataeibacter saccharivorans NUWB1 in combination with components from the Hestrin-Schramm (HS) medium. Physicochemical properties revealed that the obtained BNC exhibited a crystallinity index of 60.5 %, tensile strength of 43.5 MPa along with enhanced thermostability reaching up to 360 °C. N2 adsorption-desorption isotherm of the BNC displayed characteristics of type IV, indicating the presence of a mesoporous structure. The produced BNC underwent thorough investigation, focusing on its efficacy in addressing environmental concerns, particularly in removing emerging pharmaceutical pollutants like Metformin and Paracetamol. Remarkably, the BNC exhibited strong adsorption capabilities, aligning with the Langmuir isotherm and pseudo-second-order model. Thermodynamic analysis confirmed a spontaneous and endothermic adsorption process. Furthermore, the BNC showed potential for regeneration, enabling up to five recycling cycles. Cytotoxicity and oxidative stress assays validated the biocompatibility of BNC. Lastly, the BNC films displayed an impressive 88.73 % biodegradation within 21 days.

Production of natural cellulose-based microfibres, from oil palm mesocarp fibres and pineapple leaf wastes, as porous supports for further applications

Natural cellulose-based microfibers were obtained through an economical and environmentally sustainable process called alkaline-peroxide purification, from the waste products of oil palm mesocarp fibres (OPMF) and pineapple leaves (PL), with the intention of creating porous, biodegradable, biocompatible, and non-toxic solid supports for use in future processes. The extracted microfibres were then taken through microscopic, spectroscopic and thermal characterisation to establish their cellulosic nature. The scanning electron microscopic (SEM) images of the bleached microfibres (B-OPMF and B-PLF) were cleaner, smoother and porous as compared with that of the unrefined fibres (Ur-OPMF and Ur-PLF). The bleached fibres (B-OPMF and B-PLF) exhibited peaks of C and O, which are indicative of pure cellulose, in the energy-dispersive X-ray spectroscopy (EDS) analysis. The FTIR spectral analysis of the extracted cellulose-based fibres (B-OPMF and B-PLF) exhibited peaks that were similar in composition to the reference cellulose (P-GB). For the thermogravimetric analysis (TGA) analysis, the maximum weight degradation in the reference cellulose (P-GB), occurred at 363.11 °C, in the bleached palm fibres (B-OPMF) at 334.55 °C and in the bleached pineapple leaf fibres (B-PLF) at 375.68 °C which, corresponds to cellulose decomposition. The differential scanning calorimetry (DSC) test verified the microfibers' thermally induced transitions. Therefore, these cellulose-based microfibres could be applied as functionalised microfibre supports for future applications.

A Review on the Interaction of Acetic Acid Bacteria and Microbes in Food Fermentation: A Microbial Ecology Perspective

In fermented foods, acetic acid bacteria (AAB), kinds of bacteria with a long history of utilization, contribute to safety, nutritional, and sensory properties primarily through acetic acid fermentation. AAB are commonly found in various fermented foods such as vinegar, sour beer, fermented cocoa and coffee beans, kefir beverages, kombucha, and sourdough. They interact and cooperate with a variety of microorganisms, resulting in the formation of diverse metabolites and the production of fermented foods with distinct flavors. Understanding the interactions between AAB and other microbes is crucial for effectively controlling and utilizing AAB in fermentation processes. However, these microbial interactions are influenced by factors such as strain type, nutritional conditions, ecological niches, and fermentation duration. In this review, we examine the relationships and research methodologies of microbial interactions and interaction studies between AAB and yeasts, lactic acid bacteria (LAB), and bacilli in different food fermentation processes involving these microorganisms. The objective of this review is to identify key interaction models involving AAB and other microorganisms. The insights gained will provide scientific guidance for the effective utilization of AAB as functional microorganisms in food fermentation processes.

Co-production of pigment and high value-added bacterial nanocellulose from Suaeda salsa biomass with improved efficiency of enzymatic saccharification and fermentation

This study evaluated the co-production of pigment and bacterial nanocellulose (BNC) from S. salsa biomass. The extraction of the beet red pigment reduced the salts and flavonoids contents by 82.7%-100%, promoting the efficiencies of enzymatic saccharification of the biomass and the fermentation of BNC from the hydrolysate. SEM analysis revealed that the extraction process disrupted the lignocellulosic fiber structure, and the chemical analysis revealed the lessened cellulase inhibitors, consequently facilitating enzymatic saccharification for 10.4 times. BNC producing strains were found to be hyper-sensitive to NaCl stress, produced up to 400.4% more BNC from the hydrolysate after the extraction. The fermentation results of BNC indicated that the LDU-A strain yielded 2.116 g/L and 0.539 g/L in ES-M and NES-M, respectively. In comparison to the control, the yield in ES-M increased by approximately 20.0%, while the enhancement in NES-M was more significant, reaching 292.6%. After conducting a comprehensive characterization of BNC derived from S. salsa through Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Thermogravimetric Analysis (TGA), the average fiber diameter distribution of these four BNC materials ranges from 22.23 to 33.03 nanometers, with a crystallinity range of 77%-90%. Additionally, they exhibit a consistent trend during the thermal degradation process, further emphasizing their stability in high-temperature environments and similar thermal properties. Our study found an efficient co-production approach of pigment and BNC from S. salsa biomass. Pigment extraction made biomass more physically and chemically digestible to cellulase, and significantly improved BNC productivity and quality.

Bacterial cellulose: Nature's greener tool for industries

Bacteria are considered mini chemical factories that help us in providing a wide range of products for various purposes. These days, bacterial cellulose (BC) is getting attention by researchers due to its quality, eco-friendly nature, and excellent physical-mechanical qualities. It is being used in the fabrication of nanocomposites. Its nanocomposites can be used in various industries, including medicine, food, leather, textiles, environment, electronics, and cosmetics. This area of research is emerging and still in its infancy stage, as new applications are still coming up. Most of the work on BC has been done during the last two decades and serious inputs are required in this direction in order to make the production process commercially viable and ultimately the application part. Biowastes, such as fruits and vegetables wastes, can be used as a cost-effective medium to minimize the cost for large-scale production of BC-based nanocomposites thus will valorize the biowaste material into a valuable product. Using biowaste as media will also aid in better waste management along with reduction in detrimental environmental effects. This review will help the readers to understand the potential applications of BC and its nanocomposites as well as their vital role in our daily lives.

Production of Bacterial Exopolysaccharides: Xanthan and Bacterial Cellulose

Recently, degradable biopolymers have become increasingly important as potential environmentally friendly biomaterials, providing a wide range of applications in various fields. Bacterial exopolysaccharides (EPSs) are biomacromolecules, which due to their unique properties have found applications in biomedicine, foodstuff, textiles, cosmetics, petroleum, pharmaceuticals, nanoelectronics, and environmental remediation. One of the important commercial polysaccharides produced on an industrial scale is xanthan. In recent years, the range of its application has expanded significantly. Bacterial cellulose (BC) is another unique EPS with a rapidly increasing range of applications. Due to the great prospects for their practical application, the development of their highly efficient production remains an important task. The present review summarizes the strategies for the cost-effective production of such important biomacromolecules as xanthan and BC and demonstrates for the first time common approaches to their efficient production and to obtaining new functional materials for a wide range of applications, including wound healing, drug delivery, tissue engineering, environmental remediation, nanoelectronics, and 3D bioprinting. In the end, we discuss present limitations of xanthan and BC production and the line of future research.

Insight into the Latest Medical Applications of Nanocellulose

Nanocelluloses (NCs) are appealing nanomaterials that have experienced rapid development in recent years, with great potential in the biomedical field. This trend aligns with the increasing demand for sustainable materials, which will contribute both to an improvement in wellbeing and an extension of human life, and with the demand to keep up with advances in medical technology. In recent years, due to the diversity of their physical and biological properties and the possibility of tuning them according to the desired goal, these nanomaterials represent a point of maximum interest in the medical field. Applications such as tissue engineering, drug delivery, wound dressing, medical implants or those in cardiovascular health are some of the applications in which NCs have been successfully used. This review presents insight into the latest medical applications of NCs, in the forms of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs) and bacterial nanocellulose (BNC), with an emphasis on the domains that have recently experienced remarkable growth, namely wound dressing, tissue engineering and drug delivery. In order to highlight only the most recent achievements, the presented information is focused on studies from the last 3 years. Approaches to the preparation of NCs are discussed either by top-down (chemical or mechanical degradation) or by bottom-up (biosynthesis) techniques, along with their morphological characterization and unique properties, such as mechanical and biological properties. Finally, the main challenges, limitations and future research directions of NCs are identified in a sustained effort to identify their effective use in biomedical fields.

Reprocessing of side-streams towards obtaining valuable bacterial metabolites

Every year, all over the world, the industry generates huge amounts of residues. Side-streams are most often used as feed, landfilled, incinerated, or discharged into sewage. These disposal methods are far from perfect. Taking into account the composition of the side-streams, it seems that they should be used as raw materials for further processing, in accordance with the zero-waste policy and sustainable development. The article describes the latest achievements in biotechnology in the context of bacterial reprocessing of residues with the simultaneous acquisition of their metabolites. The article focuses on four metabolites - bacterial cellulose, propionic acid, vitamin B12 and PHAs. Taking into account global trends (e.g. food, packaging, medicine), it seems that in the near future there will be a sharp increase in demand for this type of compounds. In order for their production to be profitable and commercialised, cheap methods of its obtaining must be developed. The article, in addition to obtaining these bacterial metabolites from side-streams, also discusses e.g. factors affecting their production, metabolic pathways and potential and current applications. The presented chapters provide a complete overview of the current knowledge on above metabolites, which can be helpful for the academic and scientific communities and the several industries. KEY POINTS: • The industry generates millions of tons of organic side-streams each year. • Generated residues burden the natural environment. • A good and cost-effective method of side-streams management seems to be biotechnology - reprocessing with the use of bacteria. • Biotechnological disposal of side-streams gives the opportunity to obtain valuable compounds in cheaper ways: BC, PA, vitmain B12, PHAs.

Nanocellulose: An amazing nanomaterial with diverse applications in food science

Recently, nanocellulose has gained growing interests in food science due to its many advantages including its broad resource of raw materials, renewability, interface stability, high surface area, mechanical strength, prebiotic characteristics, surface chemistry versatility and easy modification. Since then, this review summarized the sources, morphology, and structure characteristics of nanocellulose. Meanwhile, the mechanical, chemical, and combined treatment methods for the preparation of nanocellulose with desired properties were elaborated. Furthermore, the application of nanocellulose in Pickering emulsions, reinforced food packaging, functional food ingredient, food-grade hydrogels, and biosensors were emphasized. Finally, the safety, challenges, and future perspectives of nanocellulose were discussed. This work provided key developments and effective benefits of nanocellulose for future research opportunities in food.

Improved production of bacterial cellulose by Komagataeibacter europaeus employing fruit extract as carbon source

Bacterial cellulose (BC) has attracted worldwide attention owing to its tremendous properties and versatile applications. BC has huge market demand, however; its production is still limited hence important to explore the economically and technically feasible bioprocess for its improved production. The current study is based on improving the bioprocess for BC production employing Komagataeibacter europeaus 14148. Physico-chemical parameters have been optimized e.g., initial pH, incubation temperature, incubation period, inoculum size, and carbon source for maximum BC production. The study employed crude and/or a defined carbon source in the production medium. Hestrin and Schramm (HS) medium was used for BC production with initial pH 5.5 at 30 °C after 7 days of incubation under static conditions. The yield of BC obtained from fruit juice extracted from orange, papaya, mango and banana were higher than other sugars employed. The maximum BC yield of 3.48 ± 0.16 g/L was obtained with papaya extract having 40 g/L reducing sugar concentration and 3.47 ± 0.05 g/L BC was obtained with orange extract having 40 g/L reducing sugar equivalent in the medium. BC yield was about three-fold higher than standard HS medium. Fruit extracts can be employed as sustainable and economic substrates for BC production to replace glucose and fructose.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05451-y.

Removal of heavy metal vanadium from aqueous solution by nanocellulose produced from Komagataeibacter europaeus employing pineapple waste as carbon source

Environmental concerns have taken a center stage in our lives driving the society towards biorefinery. Bioprocess development to produce valuable products utilizing waste has its own significance in circular bioeconomy and environmental sustainability. In the present study, production of bacterial cellulose using pineapple waste as carbon source by Komagataeibacter europaeus was undertaken and it was applied for removal of vanadium, a heavy metal which is generated as waste by semiconductors industry in Taiwan. Highest yield of bacterial cellulose (BC) e.i. 5.04 g/L was obtained with pineapple core hydrolysate (HS-PC) replacing glucose in HS medium. The vanadium adsorption capacity by BC produced by HS medium was 5.24 mg/g BC at pH 4 and 2.85 mg/g BC was observed on PCH medium. BC was characterised via SEM, FTIR and XRD.

Critical challenges and technological breakthroughs in food waste hydrolysis and detoxification for fuels and chemicals production

Organic waste has increased as the global population and economy have grown exponentially. Food waste (FW) is posing a severe environmental issue because of mismanaged disposal techniques, which frequently result in the squandering of carbohydrate-rich feedstocks. In an advanced valorization strategy, organic material in FW can be used as a viable carbon source for microbial digestion and hence for the generation of value-added compounds. In comparison to traditional feedstocks, a modest pretreatment of the FW stream utilizing chemical, biochemical, or thermochemical techniques can extract bulk of sugars for microbial digestion. Pretreatment produces a large number of toxins and inhibitors that affect bacterial fuel and chemical conversion processes. Thus, the current review scrutinizes the FW structure, pretreatment methods (e.g., physical, chemical, physicochemical, and biological), and various strategies for detoxification before microbial fermentation into renewable chemical production. Technological and commercial challenges and future perspectives for FW integrated biorefineries have also been outlined.

Bacterial Cellulose Production from agricultural Residues by two Komagataeibacter sp. Strains

Agricultural residues are constantly increasing with increased farming processes, and improper disposal is detrimental to the environment. Majority of these waste residues are rich in lignocellulose, which makes them suitable substrate for bacterial fermentation in the production of value-added products. In this study, bacterial cellulose (BC), a purer and better form of cellulose, was produced by two Komagataeibacter sp. isolated from rotten banana and kombucha drink using corncob (CC) and sugarcane bagasse (SCB) enzymatic hydrolyzate, under different fermentation conditions, that is, static, continuous, and intermittent agitation. The physicochemical and mechanical properties of the BC films were then investigated by Fourier Transformed Infrared Spectroscopy (FTIR), Thermogravimetry analysis, Field Emission Scanning Electron Microscopy (FE-SEM), and Dynamic mechanical analysis. Agitation gave a higher BC yield, with Komagataeibacter sp. CCUG73629 producing BC from CC with a dry weight of 1.6 g/L and 1.4 g/L under continuous and intermittent agitation, respectively, compared with that of 0.9 g/L in HS medium. While BC yield of dry weight up to 1.2 g/L was obtained from SCB by Komagataeibacter sp. CCUG73630 under continuous agitation compared to that of 0.3 g/L in HS medium. FTIR analysis showed BC bands associated with cellulose I, with high thermal stability. The FE-SEM analysis showed that BC fibers were highly ordered and densely packed. Although the BC produced by both strains showed similar physicochemical and morphological properties, the BC produced by the Komagataeibacter sp. CCUG73630 in CC under intermittent agitation had the best modulus of elasticity, 10.8 GPa and tensile strength, 70.9 MPa.

Lytic polysaccharide monooxygenases as powerful tools in enzymatically assisted preparation of nano-scaled cellulose from lignocellulose: A review

Nanocellulose, either in the form of fibers or crystals, constitutes a renewable, biobased, biocompatible material with advantageous mechanical properties that can be isolated from lignocellulosic biomass. Enzyme-assisted isolation of nanocellulose is an attractive, environmentally friendly approach that leads to products of higher quality compared to their chemically prepared counterparts. Lytic polysaccharide monooxygenases (LPMOs) are enzymes that oxidatively cleave the β-1,4-glycosidic bond of polysaccharides upon activation of O₂ or H₂O₂ and presence of an electron donor. Their use for treatment of cellulose fibers towards the preparation of nano-scaled cellulose is related to the ability of LPMOs to create nicking points on the fiber surface, thus facilitating fiber disruption and separation. The aim of this review is to describe the mode of action of LPMOs on cellulose fibers towards the isolation of nanostructures, thus highlighting their great potential for the production of nanocellulose as a novel value added product from lignocellulose.

Evaluation of detoxified sugarcane bagasse hydrolysate by atmospheric cold plasma for bacterial cellulose production

Cellulosic waste as a major type of agricultural waste can be acid deconstructed as a carbon source for fermentation application. However, various fermented inhibitors, such as formic acid, furfural, and 5-hydroxymethylfurfural, are also produced during processing. In this study, sugarcane bagasse (SB) was hydrolyzed with sulfuric acid, and atmospheric cold plasma (ACP) was used to remove the toxic inhibitors. The detoxified SB hydrolysate was used as alternative nutrients for bacterial cellulose (BC) production. Results showed that degradation rates of formic acid, 5-hydroxymethylfurfural, and furfural respectively reached 25.2%, 78.6%, and 100% with optimized ACP conditions (argon ACP at 200 W for 25 min). In BC production, the ACP-treated SB hydrolysate group (PT) exhibited high BC production (1.68 g/L) but was lower than that from the ACP-untreated SB hydrolysate group (PUT) (1.88 g/L), which suggests that ACP detoxification might also cause some crucial nutrients loss of the SB hydrolysate, leading to a decrease in BC production. The material properties of BC produced from detoxified based medium are also evaluated. These findings have important implications for the broader domain of ACP detoxification for cellulosic acid hydrolysates applied to BC production.

Influence of cellulose nanocrystal addition on the production and characterization of bacterial nanocellulose

Bacterial nanocellulose (BNC) is characterized by high purity and excellent mechanical properties; however, its production is constrained by low yield. Therefore, efforts aimed at improving its yield and material properties are imperative. This study investigated the effect of adding different concentrations (0%, 0.5%, and 1.0%) of cellulose nanocrystal (CNC) in Hestrin-Schramm modified medium on the yield and properties of BNC produced by Komagataeibacter sp. SFCB22-18. The BNC yield increased as following an increase in added CNC concentration. Also, the morphology, structure, crystallinity, thermal stability, and mechanical properties of BNC improved after CNC incorporation. A low CNC concentration (0.1%) favored mechanical strength, whereas 0.5% gave the optimum morphology, structural, and thermal stability. These results showed that modifying BNC with CNC could help increase yield and improve its properties, and thus; the potentiality of BNC in various applications would be much enhanced.

Bacterial nanocellulose: engineering, production, and applications

Bacterial nanocellulose (BNC) has been emerging as a biomaterial of considerable significance in a number of industrial sectors because of its remarkable physico-chemical and biological characteristics. High capital expenses, manufacturing costs, and a paucity of some well-scalable methods, all of which lead to low BNC output in commercial scale, are major barriers that must be addressed. Advances in production methods, including bioreactor technologies, static intermittent, and semi-continuous fed batch technologies, and innovative outlay substrates, may be able to overcome the challenges to BNC production at the industrial scale. The novelty of this review is that it highlights genetic modification possibilities in BNC production to overcome existing impediments and open up viable routes for large-scale production, suitable for real-world applications. This review focuses on various production routes of BNC, its properties, and applications, especially the major advancement in food, personal care, biomedical and electronic industries.

Ultrasound-assisted dilute acid hydrolysis for production of essential oils, pectin and bacterial cellulose via a citrus processing waste biorefinery

An orange peel waste biorefinery was developed employing a design of experiments approach to optimize the ultrasound-assisted dilute acid hydrolysis process applied for production of useful commodities. Central composite design-based response surface methodology was used to approximate the combined effects of process parameters in simultaneous production of essential oils, pectin and a sugar-rich hydrolyzate. Application of a desirability function determined the optimal conditions required for maximal production efficiency of essential oils, pectin and sugars as 5.75% solid loading, 1.21% acid concentration and 34.2 min duration. Maximum production yields of 0.12% w/w essential oils, 45% w/w pectin and 40% w/w sugars were achieved under optimized conditions in lab- and pilot-scale facilities. The hydrolyzate formed was applied in bacterial cellulose fermentations producing 5.82 g biopolymer per 100 g waste. Design of experiments was efficient for process analysis and optimization providing a systems platform for the study of biomass-based biorefineries.

Characterisation of bacterial nanocellulose and nanostructured carbon produced from crude glycerol by Komagataeibacter sucrofermentans

Bacterial nanocellulose (BNC), which has tunable properties, is a precursor of nanostructured energy storage materials; however, the cost of BNC production is challenging. This study uses crude glycerol from the biodiesel industry as a carbon nutrient and first-time carbonised BNC from K. sucrofermentans that is applied in energy storage. From crude glycerol in static cultivation, 6.4 g L^-1 BNC was produced with a high crystallinity index (85%) and tensile properties in comparison to conventionally used pure carbon substrates. Carbon materials were derived from the BNC retained fibrous and crystalline features with disordered porous structures. The electrochemical properties of the carbon materials have a specific capacitance of 140 F g^-1. This study highlights the valorisation of waste glycerol from the biodiesel industry as a substrate for efficient BNC production and the energy storage potential of carbon derived from BNC as renewable energy materials.

Micro- and nanocelluloses from non-wood waste sources; processes and use in industrial applications

In addition to renewability and abundance, nanocellulose materials have tremendous (and variable) properties for different applications, ranging from bulk applications, such as paper and packaging reinforcement, to emerging high added-value applications, such as substrates for optoelectronics. Lignocellulosic biomass from agricultural and industrial waste sources is readily available and shows great promise as an inexpensive and sustainable raw material for nanocellulose production. However, the understanding of the potential of using non-wood based biowaste sources is not established and systematic comparisons of versatile agricultural and industrial waste sources can elucidate this complex topic. Here we present an overview of the most studied and most promising sources from agro-industrial waste, the processes to convert them into nanocellulose, some of the established and emerging applications, and discuss the advancements that are still needed for large-scale production. Sugarcane bagasse and oil palm empty fruit bunch have been the most researched waste-based sources for nanocellulose production and demonstrate the most promise due to availability and access. Industrial sources seem to have advantages over agricultural sources in collectability and ease of access. This work gives insight on the potential and the challenges of nanocellulose production from waste sources and discusses how the criteria set for nanocellulose materials in different applications can be met, thus opening new routes for circular economy.

Physicochemical Properties of Nanocellulose Isolated from Cotton Stalk Waste

In recent years, nanocellulose has become an attractive and high-value-added product. The cotton stalk is a waste product with a high cellulose content. Therefore, nanocellulose can be isolated from the cotton stalk. Properties of nanocellulose are affected by its nanoscale. In this study, the characteristics of cellulose in nanoscale were investigated. A series of cotton stalk nanocelluloses were prepared by sulfuric acid hydrolysis to study their physicochemical properties and the differences of nanocelluloses on different nanoscales. The obtained nanocelluloses were analyzed by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TA), and X-ray diffractometry (XRD). From the morphology analysis, the mean length and width of nanocelluloses were decreased to 90.5 and 7.0 nm, respectively. From the FTIR analysis, with the particle size decreasing, hydrogen bonds were broken and recombined. Acid hydrolysis mainly acted on intramolecular hydrogen bonds of cellulose macromolecules, especially on O(3)H···O(5) bonds. The crystal arrangement model of nanocellulose was investigated. From the TA analysis, the thermal property was decreased with a reduction of nanocellulose particle size. The CrI of the cotton stalk nanocellulose was the highest at up to 87.10%. The differences of cotton stalk nanocelluloses give significant changes to physicochemical behaviors at the nanoscale. The research would provide a theoretical basis for the future application of nanocelluloses.

Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives

A novel nanomaterial, bacterial cellulose (BC), has become noteworthy recently due to its better physicochemical properties and biodegradability, which are desirable for various applications. Since cost is a significant limitation in the production of cellulose, current efforts are focused on the use of industrial waste as a cost-effective substrate for the synthesis of BC or microbial cellulose. The utilization of industrial wastes and byproduct streams as fermentation media could improve the cost-competitiveness of BC production. This paper examines the feasibility of using typical wastes generated by industry sectors as sources of nutrients (carbon and nitrogen) for the commercial-scale production of BC. Numerous preliminary findings in the literature data have revealed the potential to yield a high concentration of BC from various industrial wastes. These findings indicated the need to optimize culture conditions, aiming for improved large-scale production of BC from waste streams.

Efficacy of Bacterial Nanocellulose in Hard Tissue Regeneration: A Review

Bacterial nanocellulose (BNC, as exopolysaccharide) synthesized by some specific bacteria strains is a fascinating biopolymer composed of the three-dimensional pure cellulosic nanofibrous matrix without containing lignin, hemicellulose, pectin, and other impurities as in plant-based cellulose. Due to its excellent biocompatibility (in vitro and in vivo), high water-holding capacity, flexibility, high mechanical properties, and a large number of hydroxyl groups that are most similar characteristics of native tissues, BNC has shown great potential in tissue engineering applications. This review focuses on and discusses the efficacy of BNC- or BNC-based biomaterials for hard tissue regeneration. In this review, we provide brief information on the key aspects of synthesis and properties of BNC, including solubility, biodegradability, thermal stability, antimicrobial ability, toxicity, and cellular response. Further, modification approaches are discussed briefly to improve the properties of BNC or BNC-based structures. In addition, various biomaterials by using BNC (as sacrificial template or matrix) or BNC in conjugation with polymers and/or fillers are reviewed and discussed for dental and bone tissue engineering applications. Moreover, the conclusion with perspective for future research directions of using BNC for hard tissue regeneration is briefly discussed.

Biosynthesis of Bacterial Cellulose by Extended Cultivation with Multiple Removal of BC Pellicles

Extended cultivation with multiple removal of BC pellicles is proposed herein as a new biosynthetic process for bacterial cellulose (BC). This method enhances the BC surface area by 5-11 times per unit volume of the growth medium, improving the economic efficiency of biosynthesis. The resultant BC gel-films were thin, transparent, and congruent. The degree of polymerization (DP) and elastic modulus (EM) depended on the number of BC pellicle removals, vessel shape, and volume. The quality of BC from removals II-III to VII was better than from removal I. The process scale-up of 1:40 by volume increased DP by 1.5 times and EM by 5 times. A fact was established that the symbiotic Medusomyces gisevii Sa-12 was adaptable to exhausted growth medium: the medium was able to biosynthesize BC for 60 days, while glucose ran low at 24 days. On extended cultivation, DP and EM were found to decline by 39-64% and 57-65%, respectively. The BC gel-films obtained upon removals I-VI were successfully trialed in experimental tension-free hernioplasty.

Nanocelluloses: Sources, Pretreatment, Isolations, Modification, and Its Application as the Drug Carriers

The 'Back-to-nature' concept has currently been adopted intensively in various industries, especially the pharmaceutical industry. In the past few decades, the overuse of synthetic chemicals has caused severe damage to the environment and ecosystem. One class of natural materials developed to substitute artificial chemicals in the pharmaceutical industries is the natural polymers, including cellulose and its derivatives. The development of nanocelluloses as nanocarriers in drug delivery systems has reached an advanced stage. Cellulose nanofiber (CNF), nanocrystal cellulose (NCC), and bacterial nanocellulose (BC) are the most common nanocellulose used as nanocarriers in drug delivery systems. Modification and functionalization using various processes and chemicals have been carried out to increase the adsorption and drug delivery performance of nanocellulose. Nanocellulose may be attached to the drug by physical interaction or chemical functionalization for covalent drug binding. Current development of nanocarrier formulations such as surfactant nanocellulose, ultra-lightweight porous materials, hydrogel, polyelectrolytes, and inorganic hybridizations has advanced to enable the construction of stimuli-responsive and specific recognition characteristics. Thus, an opportunity has emerged to develop a new generation of nanocellulose-based carriers that can modulate the drug conveyance for diverse drug characteristics. This review provides insights into selecting appropriate nanocellulose-based hybrid materials and the available modification routes to achieve satisfactory carrier performance and briefly discusses the essential criteria to achieve high-quality nanocellulose.

Production of Bacterial Cellulose from Acetobacter Species and Its Applications – A Review

Bacterial cellulose (BC) is a natural polymer secreted as a protective cell covering of certain bacterial species. In contrary to plant cellulose, BC possesses some unique features like high moisture-holding capacity, high durability, high liquid absorbing capabilities, biostability, and biodegradability, makes BC an excellent raw material in wide-ranging areas like biomedical, food, agriculture, paper, textile industries and electronics. The main objective of this review is to discuss various aspects of BC production (different sources for bacterial strain isolation, culture media and, its alternatives also major culture techniques). In addition, various applications of BC are also reviewed.

Valorization of fruit processing waste to produce high value-added bacterial nanocellulose by a novel strain Komagataeibacter xylinus IITR DKH20

To date, the production of bacterial nanocellulose (BNC) by standard methods has been well known, while the use of low-cost feedstock as an alternative medium still needs to be explored for BNC commercialization. This study explores the prospect for the use of the different aqueous extract of fruit peel wastes (aE-FPW) as a nutrient and carbon source for the production of BNC. Herein, this objective was accomplished by the use of a novel, high- yielding strain, isolated from rotten apple and further identified as Komagataeibacter xylinus IITR DKH20 using 16 s rRNA sequencing analysis. The physicochemical properties of BNC matrix collected from the various aE-FPW mediums were similar or advanced to those collected with the HS medium. Statistical optimization of BNC based on Central Composite Design was performed to study the effect of significant parameters and the results demonstrated that the BNC yield (11.44 g L^-1) was increased by 4.5 fold after optimization.

Bacterial nanocellulose production and biomedical applications

Bacterial nanocellulose (BNC) is a homopolymer of β-1,4 linked glycose, which is synthesized by Acetobacter using simple culturing methods to allow inexpensive and environmentally friendly small- and large-scale production. Depending on the growth media and types of fermentation methods, ultra-pure cellulose can be obtained with different physio-chemical characteristics. Upon biosynthesis, bacterial cellulose is assembled in the medium into a nanostructured network of glucan polymers that are semitransparent, mechanically highly resistant, but soft and elastic, and with a high capacity to store water and exchange gasses. BNC, generally recognized as safe as well as one of the most biocompatible materials, has been found numerous medical applications in wound dressing, drug delivery systems, and implants of heart valves, blood vessels, tympanic membranes, bones, teeth, cartilages, cornea, and urinary tracts.

The role of genetic manipulation and in situ modifications on production of bacterial nanocellulose: A review

Natural polysaccharides are well-known biomaterials because of their availability and low-cost, with applications in diverse fields. Cellulose, a renowned polysaccharide, can be obtained from different sources including plants, algae, and bacteria, but recently much attention has been paid to the microorganisms due to their potential of producing renewable compounds. In this regard, bacterial nanocellulose (BNC) is a novel type of nanocellulose material that is commercially synthesized mainly by Komagataeibacter spp. Characteristics such as purity, porosity, and remarkable mechanical properties made BNC a superior green biopolymer with applications in pharmacology, biomedicine, bioprocessing, and food. Genetic manipulation of BNC-producing strains and in situ modifications of the culturing conditions can lead to BNC with enhanced yield/productivity and properties. This review mainly highlights the role of genetic engineering of Komagataeibacter strains and co-culturing of bacterial strains with additives such as microorganisms and nanomaterials to synthesize BNC with improved functionality and productivity rate.

Waste biorefinery towards a sustainable circular bioeconomy: a solution to global issues

Global issues such as environmental problems and food security are currently of concern to all of us. Circular bioeconomy is a promising approach towards resolving these global issues. The production of bioenergy and biomaterials can sustain the energy-environment nexus as well as substitute the devoid of petroleum as the production feedstock, thereby contributing to a cleaner and low carbon environment. In addition, assimilation of waste into bioprocesses for the production of useful products and metabolites lead towards a sustainable circular bioeconomy. This review aims to highlight the waste biorefinery as a sustainable bio-based circular economy, and, therefore, promoting a greener environment. Several case studies on the bioprocesses utilising waste for biopolymers and bio-lipids production as well as bioprocesses incorporated with wastewater treatment are well discussed. The strategy of waste biorefinery integrated with circular bioeconomy in the perspectives of unravelling the global issues can help to tackle carbon management and greenhouse gas emissions. A waste biorefinery-circular bioeconomy strategy represents a low carbon economy by reducing greenhouse gases footprint, and holds great prospects for a sustainable and greener world.

Atmospheric cold plasma-assisted pineapple peel waste hydrolysate detoxification for the production of bacterial cellulose

Toxic compounds in pineapple peel waste hydrolysate (PPWH), namely formic acid, 5-hydroxymethylfurfural (HMF), and furfural, are the major predicament in its utilization as a carbon source for bacterial cellulose (BC) fermentation. A rapid detoxification procedures using atmospheric cold plasma (ACP) technique were employed to reduce the toxic compounds. ACP treatment allows the breakdown of toxic compounds without causing excessive breakdown of sugars. Herein, the performance of two available laboratory ACP reactors for PPWH detoxification was being demonstrated. ACP-reactor-1 (R1) runs on plasma power of 80-200 W with argon (Ar) plasma source, while ACP-reactor-2 (R2) runs at 500-600 W with air plasma source. Treatment in R1, at 200 W for 15 min, results in 74.06%, 51.38%, and 21.81% reduction of furfural, HMF, and formic acid. Treatment in R2 at 600 W gives 45.05%, 32.59%, and 60.41% reductions of furfural, HMF, and formic acid. The BC yield from the fermentation of Komagateibacter xylinus in the R1-treated PPWH, R2-treated PPWH, and untreated-PPWH is 2.82, 3.82, and 2.97 g/L, respectively. The results show that ACP treatment provides a novel detoxified strategy in achieving agricultural waste hydrolysate reuse in fermentation. Furthermore, the results also imply that untreated PPWH can be an inexpensive and sustainable resource for fermentation media supplementation.

Nanocellulose from various biomass wastes: Its preparation and potential usages towards the high value-added products

Biomass waste comes from a wide range of sources, such as forest, agricultural, algae wastes, as well as other relevant industrial by-products. It is an important alternative energy source as well as a unique source for various bioproducts applied in many fields. For the past two decades, how to reuse, recycle and best recover various biomass wastes for high value-added bioproducts has received significant attention, which has not only come from various academia communities but also from many civil and medical industries. To summarize one of the cutting-edge technologies applied with nanocellulose biomaterials, this review focused on various preparation methods and strategies to make nanocellulose from diverse biomass wastes and their potential applications in biomedical areas and other promising new fields.

Lignocellulosic Biomass for the Synthesis of Nanocellulose and Its Eco-Friendly Advanced Applications

Nanocellulose is a unique and natural compound extracted from native cellulose using different extraction techniques. Nanocellulose is currently attracting attention due to its excellent properties such as special surface chemistry, exceptional physical and chemical strength, and rich hydroxyl groups for modification. In addition, its significant biological properties, like biodegradability, biocompatibility, and non-toxicity, accompanied by being environmentally friendly, are added advantages. The current review is focused on the lignocellulosic biomass processing methods for nanocellulose production and their usage for eco-friendly and environmental sustainability. We have also described insights into different techniques by which cellulosic materials can be changed into cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs). Lastly, we further discussed how nano-cellulosic materials are being used in a variety of industries such as the food sector, biomedical hygiene products, health care, water purification, and sensors. In the review, the unique uses of nanocelluloses in the production of nanocomposite materials, like flexible supercapacitor and polymer matrix, toward minimizing the utilization of global fossil energy and environmental pollution are envisaged. Finally, the significant application of nanomaterials in the areas of packaging industries, health and hygienic sector, cosmetics, and other important sectors are discussed. In the aspect of techno-economically feasibility, nano-cellulose-based materials may prove to be outstanding, environment friendly, and mitigate effluent load.

Improving confirmed nanometric sulfur bioproduction using engineered Thioalkalivibrio versutus

Complicated production procedures and superior characteristics of nano-sized sulfur elevate its price to 25-40 fold higher than micrograde kind. Also, natural gas hydrogen sulfide levels are restricted because of its toxic environmental consequences. Thioalkalivibrio versutus is a polyextremophilic industrial autotroph with high natural gas desulfurization capability. Here, nanometric (>50 nm) sulfur bioproduction using T. versutus while desulfurizing natural gas was validated. Also, this production was enhanced by 166.7% via lowering sulfate production by 55.1%. A specially-developed CRISPR system, with 42% editing efficiency, simplified the genome editing workflow scheme for this challenging bacterium. In parallel, sulfur metabolism was uncovered using proteins mining and transcriptome studies for defining sulfate-producing key genes (heterodisulfide reductase-like complex, sulfur dioxygenase, sulfite dehydrogenase and sulfite oxidase). This study provided cost-effective nanometric sulfur production and improved this production using a novel CRISPR strategy, which could be suitable for industrial polyextremophiles, after uncovering sulfur pathways in T. versutus.

3-D macro/microporous-nanofibrous bacterial cellulose scaffolds seeded with BMP-2 preconditioned mesenchymal stem cells exhibit remarkable potential for bone tissue engineering

Bone repair using BMP-2 is a promising therapeutic approach in clinical practices, however, high dosages required to be effective pose issues of cost and safety. The present study explores the potential of low dose BMP-2 treatment via tissue engineering approach, which amalgamates 3-D macro/microporous-nanofibrous bacterial cellulose (mNBC) scaffolds and low dose BMP-2 primed murine mesenchymal stem cells (C3H10T1/2 cells). Initial studies on cell-scaffold interaction using unprimed C3H10T1/2 cells confirmed that scaffolds provided a propitious environment for cell adhesion, growth, and infiltration, owing to its ECM-mimicking nano-micro-macro architecture. Osteogenic studies were conducted by preconditioning the cells with 50 ng/mL BMP-2 for 15 min, followed by culturing on mNBC scaffolds for up to three weeks. The results showed an early onset and significantly enhanced bone matrix secretion and maturation in the scaffolds seeded with BMP-2 primed cells compared to the unprimed ones. Moreover, mNBC scaffolds alone were able to facilitate the mineralization of cells to some extent. These findings suggest that, with the aid of 'osteoinduction' from low dose BMP-2 priming of stem cells and 'osteoconduction' from nano-macro/micro topography of mNBC scaffolds, a cost-effective bone tissue engineering strategy can be designed for quick and excellent in vivo osseointegration.

Ternary nano-biocomposite films using synergistic combination of bacterial cellulose with chitosan and gelatin for tissue engineering applications

Ternary nano-biocomposite films of bacterial cellulose-chitosan-gelatin (BC-C-G) were fabricated by immersing the BC pellicles into chitosan and gelatin mixture and subsequently freeze-drying. Scanning electron microscopy (SEM) images of the nano-biocomposite films revealed the presence of interconnected pores, with fibre diameter 20-150 nm. The composite films have a porosity of 95.3%, and showed good hydrophilicity with swelling ratio of 19 ± 1.8 and in vitro degradability. X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy, and thermogravimetric (TG) analysis results showed some interactions among the molecules of BC, gelatin, and chitosan within the film. The composite film offered good matrix for adhesion and proliferation of L929 fibroblasts cells as indicated by the cell attachment study, FE-SEM of cell-film constructs and cytocompatibility assay. Thus, the nano-biocomposite films of BC-C-G could be of paramount importance as tissue engineering scaffold. The "all-natural" ternary polymer composite films of BC-C-G have not been evaluated before for biomedical applications.

Bacterial cellulose: From production optimization to new applications

Bacterial cellulose (BC) is a biopolymer of great significance to the medical, pharmaceutical, and food industries. However, a high concentration of carbon sources (mainly glucose) and other culture media components is usually required to promote a significant yield of BC, which increases the bioprocess cost. Thus, optimization strategies (conventional or statistical) have become relevant for the cost-effective production of bacterial cellulose. Additionally, this biopolymer may present new properties through modifications with exogenous compounds. The present review, explores and discusses recent studies (last five years) that report the optimization of BC production and its yield as well as in situ and ex situ modifications, resulting in improved mechanical, antioxidant, and antimicrobial properties of BC for new applications.

Current progress on the production, modification, and applications of bacterial cellulose

Adoption of biomass for the development of biobased products has become a routine agenda in evolutionary metabolic engineering. Cellulose produced by bacteria is a "rising star" for this sustainable development. Unlike plant cellulose, bacterial cellulose (BC) shows several unique properties like a high degree of crystallinity, high purity, high water retention, high mechanical strength, and enhanced biocompatibility. Favored with those extraordinary properties, BC could serve as ideal biomass for the development of various industrial products. However, a low yield and the requirement for large growth media have been a persistent challenge in mass production of BC. A significant number of techniques has been developed in achieving efficient BC production. This includes the modification of bioreactors, fermentation parameters, and growth media. In this article, we summarize progress in metabolic engineering in order to solve BC growth limitation. This article emphasizes current engineered BC production by using various bioreactors, as well as highlighting the structure of BC fermented by different types of engineered-bioreactors. The comprehensive overview of the future applications of BC, aims to provide readers with insight into new economic opportunities of BC and their modifiable properties for various industrial applications. Modifications in chemical composition, structure, and genetic regulation, which preceded the advancement of BC applications, were also emphasized.

Bacterial cellulose: Biosynthesis, production, and applications

Bacterial cellulose (BC) is a natural polymer produced by the acetic acid producing bacterium and has gathered much interest over the last decade for its biomedical and biotechnological applications. Unlike the plant derived cellulose nanofibres, which require pretreatment to deconstruct the recalcitrant lignocellulosic network, BC are 100% pure, and are extruded by cells as nanofibrils. Moreover, these nanofibrils can be converted to macrofibers that possess excellent material properties, surpassing even the strength of steel, and can be used as substitutes for fossil fuel derived synthetic fibers. The focus of the review is to present the fundamental long-term research on the influence of environmental factors on the organism's BC production capabilities, the production methods that are available for scaling up/scaled-up processes, and its use as a bulk commodity or for biomedical applications.