Efficient removal of Cr(VI) from water by quaternized chitin/branched polyethylenimine biosorbent with hierarchical pore structure

Bifunctional chitosan-modified urea-formaldehyde fertilizer for soil restoration and slow, sustained nitrogen release

Nutrient supply and heavy metals (HMs) remediation are key for agricultural development. However, achieving both goals with a single agent is challenging. In this study, bifunctional chitosan-modified urea-formaldehyde (CSUF) gel beads having a three-dimensional structure were developed to serve as a slow-release nitrogen fertilizer and a HM fixative for soil treatment. The adsorption capacities for Cd(II), Cu(II), and Cr(VI) reached 49.8, 6.63, and 40 mg/g, respectively. Further, over 10 d, CSUF removed 86 %, 93.28 %, and 91.32 % of Cd(II), Cu(II), and Cr(VI), respectively, from the soil while releasing 40 % of the nitrogen. Crucially, the adsorbed HM ions were not re-released, although the nitrogen continued to be released for 15 d. Plant growth experiments indicated that CSUF promoted mung bean sprout growth, increasing the dry and fresh weights by 33.33 % and 47.83 %, respectively, and significantly mitigating HM stress effects by reducing the Cd(II), Cu(II) and Cr(VI) content in the plant tissue by 89.28 %, 92.08 %, and 94.97 %, respectively. Overall, the bifunctional fertilizer shows potential for promoting sustainable agriculture.

Chitin extraction from crab shells and synthesis of chitin @metakaolin composite for efficient amputation of Cr (VI) ions

The present research study combines chitin from shrimp waste with the oxide-rich metakaolin. Metakaolin is a blend of mixed oxides rich in silica and alumina with good adsorbent properties. The chitin@metakaolin (CHt@M.K.) composite was synthesized and characterized using FTIR, SEM, TGA, XRD and XPS techniques. Cr(VI) removal studies were compared for chitin and CHt@M.K. through adsorption. It was found that the adsorption capacity of CHt@M.K. is 278.88 mg/g, almost double that of chitin, at pH 5.0 in just 120 min of adsorption. Isotherm models like Langmuir, Freundlich, Temkin and Dubinin-Radushkevich were investigated to comprehend the adsorption process. It was revealed that Langmuir adsorption isotherm is most suitable to elucidate Cr(VI) adsorption on CHt@M.K. The adsorption kinetics indicate that pseudo first order was followed, indicating that the physisorption was the process that limited the sorption process rate. The positive enthalpy change (20.23 kJ/mol) and positive entropy change (0.083 kJ/mol K) showed that the adsorption process was endothermic and more random at the solid-liquid interface. The negative free energy change over entire temperature range was an indicator of spontaneity of the process. Apart from all these, the non-covalent interactions between Cr(VI) and composite were explained by quantum calculations based models.

Polymerized PEI-modified lignin polyphenolic materials by acid hydrolysis-phase separation for removal of Cr (VI) from industrial wastewater

Cr (VI) accumulates in an aqueous environment and exhibits huge harm to human health and the ecological system. Developed lignin biomass materials are complicated to prepare and have limited properties, and advances in lignin phenolic modification are lacking. Herein, an aminated poplar lignin-pyrogallol (PLP-PEI) with a simple design and adjustable phenolic hydroxyl content was developed using the acid hydrolysis-phase separation (AH-PS) method, and modified by the atom transfer radical polymerization (ATRP) strategy. Through diverse characterization analysis, the structural changes of PLP-PEI in the step-by-step synthesis process were monitored. An effective biomass capture system (Bio-Cap) was shown via systematically investigating the adsorption behaviors of Cr (VI) on PLP-PEI under various environmental conditions. Benefiting from introducing phenolic hydroxyl and amino groups, PLP-PEI demonstrated efficient adsorption capacity (598.80 mg/g for Cr (VI)). Additionally, the material also exhibited advantages, including monomeric chemisorption properties, strong reduction capability, and stable regeneration properties. Multiple driving forces were involved in the capture and removal process of Cr (VI), including complexation and electrostatic interaction. The low-cost natural biomass resources supported the industrial-scale synthesis and practical application of advanced aminated lignin polyphenol material, which showed outstanding advantages and enormous potential in the field of water environmental restoration.

Development of recoverable adsorbents for Cr(VI) ions by grafting of a dimethylamino group-containing monomer on polyethylene substrate and subsequent quaternization

A polymeric adsorbent for removal of hexavalent chromium (Cr(VI)) ions was developed by the photografting of 2-(dimethylamino)ethyl methacrylate (DMAEMA) to a polyethylene (PE) mesh and subsequent quaternization with iodoalkanes of different alkyl chain lengths. The grafting of DMAEMA and subsequent quaternization were verified by the FT-IR and XPS measurements. The Cr(VI) ion adsorption capacity of the DMAEMA-grafted PE meshes had the maximum value at the grafted amount of 2.6 mmol/g in a 0.20 mM K₂Cr₂O₇ solution at pH 3.0 and 30°C. The adsorption behaviour obeyed the pseudo-second order kinetic model and well expressed by Langmuir isotherm. These results suggest that the Cr(VI) ion adsorption occurs through the electrostatic interaction mainly between protonated dimethylamino groups and hydrochromate (HCrO₄^-) ions. The adsorption capacity of the quaternized PE-g-PDMAEMA meshes increased with an increase in the degree of quaternization and/or the alkyl chain length of the iodoalkanes used and the maximum adsorption ratio was obtained at the degree of quaternization of 54.2% for the iodoheptane-quaternized PE-g-PDMAEMA (PE-g-QC₇PDMAEMA) mesh. This value was about 1.86 times higher than that of the PE-g-PDAMEMA mesh. Cr(VI) ions were successfully desorbed from the PE-g-PDMAEMA and PE-g-QC₇PDMAEMA meshes in eluents such as NaOH, NaCl, and NH₄Cl. In 0.50 M NaCl, 0.10 M NH₄Cl, and 0.50 mM NaOH, the adsorption and desorption process was repeatedly performed without any considerable decrease and the desorption behaviour obeyed the pseudo-second order kinetic model. These results emphasise that the PE-g-PDMAEMA meshes and their quaternized products can be applied as an adsorbent for Cr(VI) ions.

Applications and perspectives of quaternized cellulose, chitin and chitosan: A review

Recently, increasing attention has been paid to natural polysaccharides for their low cost, biocompatibility and biodegradability. Quaternization is a modification method to improve the solubility and antibacterial ability of natural polysaccharides. Water-soluble derivatives of cellulose, chitin and chitosan offer the prospect of diverse applications in a wide range of fields, such as antibacterial products, drug delivery, wound healing, sewage treatment and ion exchange membranes. By combining the inherent properties of cellulose, chitin and chitosan with the inherent properties of the quaternary ammonium groups, new products with multiple functions and properties can be obtained. In this review, we summarized the research progress in the applications of quaternized cellulose, chitin and chitosan in recent five years. Moreover, ubiquitous challenges and personal perspectives on the further development of this promising field are also discussed.

Highly compressible and macro-porous hydrogels via the synergy of cryogelation and double-network for efficient removal of Cr(VI)

Mechanically robust and macro-porous hydrogels are urgently required for the dynamic removal of heavy metals in wastewater purification field. Herein, a novel microfibrillated cellulose/polyethyleneimine hydrogel (MFC/PEI-CD) with high compressibility and macro-porous structures was fabricated via the synergy of cryogelation and double-network for Cr(VI) adsorption from wastewater. MFCs were pre-cross-linked by bis(vinyl sulfonyl)methane (BVSM) and then formed double-network hydrogels with PEIs and glutaraldehyde below freezing. The SEM showed that the MFC/PEI-CD possessed interconnected macropores with an average pore diameter of 52 μm. Mechanical tests indicated a high compressive stress of 116.4 kPa at 80 % strain, which was 4 times higher than the corresponding MFC/PEI with a single-network. The Cr(VI) adsorption performance of MFC/PEI-CDs was systematically investigated under different parameters. Kinetic studies indicated that the adsorption process was well described by the pseudo-second-order model. Isothermal adsorption behaviors accorded well with Langmuir model with the maximum adsorption capacity of 545.1 mg/g, which was superior to most adsorption materials. More importantly, the MFC/PEI-CD was applied to dynamically adsorb Cr(VI) with the treatment volume of 2070 mL/g. Therefore, this work demonstrates that the synergy of cryogelation and double-network is a novel method for preparing macro-porous and robust materials with promising heavy metal removal from wastewater.

Mechanochemical modified nitrogen-rich biochar derived from shrimp shell: Dominant mechanism in pyridinic-N for aquatic methylene blue removal

N-doping for the preparation of functional carbon materials is a trending research topic. In this study, N-rich biochar (BC) was prepared by calcining naturally N rich shrimp shells under oxygen-limiting environment, and the calcining temperatures were controlled. BC were activated with 5% hydrochloric acid solutions and then post-modified with ball-milling to obtain a series of novel adsorbents (MBCs). All samples were characterized by SEM, BET, FT-IR, XRD, XPS, TG, and element analysis. Surface area, pore volume, and other surface functional groups were significantly improved after acidizing and ball-milling. The adsorption capacities for MB were MBC350 > MBC500 > MBC650 >BC350 > BC650 > BC500, and the equilibrium adsorption capacities were 575.01 mg/g, 506.52 mg/g, 424.59 mg/g, 113.31 mg/g, 93.53 mg/g and 86.25 mg/g, respectively. The excellent adsorption performance of MBCs for MB was ascribed to Lewis acid-base interaction, π-π interaction, electrostatic interaction and van der Waals, and the quinone group and pyridinic-N on the surface of the MBCs are identified as the major active sites. Taken together, ball-milled shrimp shell biochar is a promising material for cation dye adsorption.

Chitin-Based Magnesium Oxide Biocomposite for the Removal of Methyl Orange from Water

In this work, a cost-effective chitin-based magnesium oxide (CHt@MgO) biocomposite with excellent anionic methyl orange (MO) dye removal efficiency from water was developed. The CHt@MgO biocomposite was characterized by FT-IR, XRD, SEM-EDX, and TGA/DTG. Results proved the successful synthesis of CHt@MgO biocomposite. Adsorption of MO on the CHt@MgO biocomposite was optimized by varying experimental conditions such as pH, amount of adsorbent (m), contact time (t), temperature (T), and initial MO concentration (C_o). The optimized parameters for MO removal by CHt@MgO biocomposite were as follows: pH, 6; m, 2 g/L; t, 120 min. Two common isotherm models (Langmuir and Freundlich) and three kinetic models (pseudo-first-order (PFO), pseudo-second-order (PSO), and intraparticle diffusion (IPD)) were tested for experimental data fitting. Results showed that Langmuir and PFO were the most suitable to respectively describe equilibrium and kinetic results on the adsorption of MO adsorption on CHt@MgO biocomposite. The maximum Langmuir monolayer adsorption capacity (q_m) on CHt@MgO biocomposite toward MO dye was 252 mg/g at 60 °C. The reusability tests revealed that CHt@MgO biocomposite possessed high (90.7%) removal efficiency after the fifth regeneration cycle.

Selective Removal of Hexavalent Chromium by Novel Nitrogen and Sulfur Containing Cellulose Composite: Role of Counter Anions

Exploiting an adsorbent with superb selectivity is of utmost importance for the remediation of Cr (VI)-laden wastewater. In this work, a novel nitrogen and sulfur functionalized 3D macroporous cellulose material (MPS) was prepared by homogeneous cross-link cellulose and polyvinylimidazole, followed by ion exchange with MoS₄^2-. MPS exhibited high removal efficiency at a broad pH range (1.0-8.0) and large adsorption capacity (379.78 mg/g) toward Cr (VI). Particularly, outstanding selectivity with an enormous partition coefficient (1.01 × 10⁷ mL/g) was achieved on MPS. Replacing MoS₄^2- with Cl^- and MoO₄^2- led to a sharp decline in adsorption selectivity, demonstrating that MoS₄^2- contributed substantially to the selectivity. Results of FTIR, XPS, and apparent kinetic analysis revealed that Cr (VI) was first pre-enriched on the MPS surface via electrostatic and dispersion forces, and then reacted with MoS₄^2- to generate Cr (III), which deposited on MPS by forming Cr(OH)₃ and chromium(III) sulfide. This study provides a new idea for designing adsorbents with a superior selectivity for removing Cr (VI) from sewage.

Structure and Adsorption Performance of Cationic Entermorpha prolifera Polysaccharide-Based Hydrogel for Typical Pollutants: Methylene Blue, Cefuroxime, and Cr (VI)

Hydrogels with polysaccharides as high polymer substrates have surprising advantages in wastewater treatment with complex components. Therefore, in this study, polysaccharides named EPS were extracted from Enteromorpha prolifera, a coastal pollutant with a wide range of sources, and cationic modification was performed to obtain CAEPS, the hydrogel with a double network structure was prepared based on EPS and CAEPS. Meanwhile, the structural characteristic of EPS and CAEPS-based hydrogel were identified by HPLC, AFM, FT-IR, TGA, SEM-EDS, Pore size distribution, and WCA, which showed that the porosity, apparent (skeletal) density, and hydrophilicity of CAEPS-hydrogels. We used nonlinear isotherms to uncover the adsorption mechanism of hydrogel applied to the water environment containing three typical pollutants (Methylene blue, Cefuroxime, and Cr (VI)). The results showed that the adsorption isotherm of the two hydrogels fit the Langmuir isotherm model, which indicated the monolayer adsorption of the pollution factor onto EPS- and CAEPS-hydrogels. The maximum adsorption capacities of CAEPS-hydrogels were higher than EPS-hydrogels, which indicated the microstructure and adsorption performance of the CAEPS-hydrogel are strengthened.

Fixed-Bed Modification of Zeolitic Tuffs and Their Application for Cr(VI) Removal

Natural clinoptilolite tuff (CL) and chabazite-clinoptilolite tuff (CH) were modified in fixed-bed column by immobilization of hexadecyltrimethylammonium bromide (HDTMA-Br), then investigated as a sorbent for inorganic anions of Cr(VI). The proposed modification technique combined with surfactant solution batching allows minimizing the surfactant loses through foaming and crystallization and creation of stable organic coverage. The HDTMA loading depended on the mineral composition of the zeolitic tuff, the topology of its external surface, and process conditions. The maximum surface coverage was obtained by gradually dosing surfactant solution in the smallest volume of batches and corresponded up to 100% and 182% of external cation exchange capacity (ECEC) for mono and double layer coverage, respectively. In case of mono layer coverage, modification proceeds until the exhaustion of surfactant in supply solution, while in the double layer one, until equilibrium of HDTMA concentration in both zeolitic and liquid phases was established. The efficiency of Cr(VI) uptake by prepared surface modified zeolites (SMZs) increased with increasing of HDTMA loading. In the case of mono layer SMZs, the capacities of CH-HDTMA and CL-HDTMA were 10.3 and 5.4 mg/g, respectively, while in the case of double layer SMZs, the amount of Cr uptake on CH-HDTMA and CL-HDTMA were 16.8 and 15 mg/g, respectively. Ion exchange is the predominant mechanism of Cr(VI) sorption but it takes place only if modification resulted in at least partial double layer coverage. The XPS analysis reveals Cr(VI) reduction to a less-toxic Cr(III) by the electron donating N-containing groups and by reaction with Fe⁺² ions on the zeolite external surface.

Enhanced sequestration of Cr(VI) onto plant extract anchored on carbon-coated aluminium oxide composite

Aluminium oxide (ALU) and carbon-coated aluminium oxide modified with Kigelia africana leaf extract (KECA) were employed for the removal of toxic hexavalent chromium (Cr(VI)) from the aqueous phase. The adsorbents (ALU and KECA) were characterized by TGA, BET, FESEM, FTIR, Raman and XRD spectroscopic techniques. The potential of KECA and ALU to remove Cr(VI) from simulated wastewater was optimum at pH 2, sorbent dose of 0.025 g and a contact time of 200 min. Meanwhile, the uptake capacity of KECA and ALU was enhanced with an increase in sorbent dose, contact time and initial Cr(VI) concentration. The uptake of Cr(VI) onto the adsorbents ALU and KECA was kinetically best described by the pseudo-second-order and Elovich models, respectively. Besides, the equilibrium data acquired for ALU and KECA obeyed Freundlich and Langmuir isotherm models, respectively. ALU and KECA were observed to have optimum adsorption capacity of 56.45 mg g^-1 and 258.2 mg g^-1, respectively. The adsorption of Cr(VI) onto the adsorbents was thermodynamically feasible, endothermic in nature and entropy-driven. A decrease in efficiency was observed on regeneration of the absorbents, thus limiting their reusability. However, the presence of functional groups with reducing property in the extract of Kigelia africana leaves was noticed to enhance the capacity of the adsorbent to abstract Cr(VI) from the solution. Hence, this study demonstrates the potential of KECA to sequestrate Cr(VI) from an aqueous solution and provides a reference for its application to the treatment of Cr(VI)-laden industrial wastewater.

Effective removal of levofloxacin drug and Cr(VI) from water by a composed nanobiosorbent of vanadium pentoxide@chitosan@MOFs

Wastewaters is generally polluted with various inorganic and organic contaminants which require effective multipurpose purification technology. In this respect, a novel V₂O₅@Ch/Cu-TMA nanobiosorbent was constructed via encapsulation of nanoscale metal organic frameworks (Cu-TMA) into vanadium pentoxide-imbedded-chitosan matrix to comprehensively investigate its efficiency in removal of levofloxacin drug (LEVO) (e.g., organic pollutant) and chromium (VI) (e.g., inorganic pollutant) from water. Both LEVO drug and Cr(VI) adsorptions were correlated to pseudo-second order (R² = 1) and Langmuir isotherm (R² = 0.9924 for LEVO and R² = 0.9815 for Cr(VI)). Adsorption of Cr(VI) was confirmed to be spontaneous and endothermic reactions, while LEVO was found to proceed via spontaneous and exothermic reactions based on the thermodynamic parameters. The emerged V₂O₅@Ch/Cu-TMA is regarded as an excellent nanobiosorbent for removal of inorganic contaminant as Cr(VI) from all natural water samples (tap, sea and wastewater) with percentages range 92.43%-96.95% and organic contaminant as LEVO drug from tap and wastewater (91.99%-97.20%).

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Adsorption of Cr(VI) from aqueous solution by a litchi shell-based adsorbent

Cr(VI) is a toxic metal pollutant existing in industrial effluents. In this study, Fe₃O₄ and layered double hydroxide (LDH) were inserted into the litchi shell (LS) successively by the co-precipitation method to synthesize the modified magnetic litchi shell adsorbent (MMLS) for removing Cr(VI). The advantageous structure characteristics of MMLS were confirmed by XRD, FT-IR, SEM and the hysteresis loop characterization. The batch experiments of optimizing the conditions (pH, adsorbent dosage, initial concentration, coexisting ions) for removing Cr(VI) were accomplished to in simulated wastewater at room temperature. And the optimal pH of 3 and initial concentration of 100 mg/L in simulated wastewater were similar to that in the actual chrome-plated rinse water with the stable MMLS. The effect of coexisting ions indicated anions and Cr(VI) competed with each other for the adsorption site, but the interactions were negligible in actual chrome-plated rinse water. Chemisorption as a rate-limiting step was confirmed with a good fit of pseudo-second-order kinetics. And the adsorption behavior of MMLS can not be explained by a single theory according to Sips model. The desorption and recycle experiments demonstrated MMLS was reusable in actual chrome-plated rinse water.

Nanoparticles of Quaternary Ammonium Polyethylenimine Derivatives for Application in Dental Materials

Various quaternary ammonium polyethylenimine (QA-PEI) derivatives have been synthesized in order to obtain nanoparticles. Due to their antibacterial activity and non-toxicity towards mammalian cells, the QA-PEI nanoparticles have been tested extensively regarding potential applications as biocidal additives in various dental composite materials. Their impact has been examined mostly for dimethacrylate-based restorative materials; however, dental cements, root canal pastes, and orthodontic adhesives have also been tested. Results of those studies showed that the addition of small quantities of QA-PEI nanoparticles, from 0.5 to 2 wt.%, led to efficient and long-lasting antibacterial effects. However, it was also discovered that the intensity of the biocidal activity strongly depended on several chemical factors, including the degree of crosslinking, length of alkyl telomeric chains, degree of N-alkylation, degree of N-methylation, counterion type, and pH. Importantly, the presence of QA-PEI nanoparticles in the studied dental composites did not negatively impact the degree of conversion in the composite matrix, nor its mechanical properties. In this review, we summarized these features and functions in order to present QA-PEI nanoparticles as modern and promising additives for dental materials that can impart unique antibacterial characteristics without deteriorating the products' structures or mechanical properties.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract

Key role of pore size in Cr(VI) removal by the composites of 3-dimentional mesoporous silica nanospheres wrapped with polyaniline

A series of three-dimensional silica nanospheres with different pore sizes was synthesized in a biphasic oil-water system and their pore dimensions were adjusted by controlling the composition of the oil phase. The silica nanospheres were then wrapped with polyaniline, characterized, and the obtained silica nanosphere-polyaniline composites were used for the removal of Cr(VI). Polyaniline was generated by the polymerization of aniline. The mesoporous silica has sufficient dendritic pore channels and offers a large contact surface for the polymerization of aniline. Furthermore, the mesoporous silica nanospheres are beneficial for dispersing polyaniline and transferring aqueous Cr(VI). The silica nanosphere-polyaniline composite with the largest pore size (~15.4 nm) showed the best Cr(VI) removal performance. We also investigated the kinetic characteristics and the result could be fitted to the pseudo-second-order kinetic model. Moreover, we demonstrate that the composites maintain a high Cr(VI) removal efficiency compared to other anions (H₂PO₄^-, SO₄^2-, etc.), indicating their good prospect in practical wastewater treatment. Remarkably, the silica-polyaniline composites showed enhanced Cr(VI) removal efficiency under UV-irradiation. The effects of electrons and H⁺ on Cr(VI) reduction are also discussed based on the results of UV-vis and X-ray photoelectron spectroscopic studies and bath experiments (influence of pH on adsorption capacity). Mechanistic studies indicate that the Cr(VI) removal occurs in two stages-adsorption and reduction. The negatively charged aqueous Cr(VI) species first interact with the positively charged protonated amine groups via electrostatic attraction, and are then further reduced to less-toxic Cr(III) by the electrons and H⁺ donated by the amine groups on polyaniline.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

Removal performance and mechanisms of Cr(VI) by an in-situ self-improvement of mesoporous biochar derived from chicken bone

A high-performance mesoporous biochar (MBCX) was fabricated from chicken bone via a facile and low-energy consumption pyrolysis process without any additional activators and templates. The physicochemical properties of biochar were carried out by elemental compositions, N₂ adsorption-desorption isotherms, FTIR, and TG. The results illustrated that lower carbonization temperature leaded to a lower specific surface area and more polar functional groups. And the meso-structure of biochar was obtained at 350 °C. Combined with the result of batch experiment, Cr(VI) adsorption capacity was decreased with the increasing in pyrolysis temperature, which suggested that the removal performance was depended on the functional groups of mesoporous biochar rather than the surface area. Kinetic analysis showed that the Cr(VI) adsorption process on MBCX was suitable for Elovich kinetic. The experimental data was well explained by Langmuir isotherm models. And the maximum adsorption capacity was 58.195 mg/g, which was higher than that of most report pristine biochars. This work not only paved a way for subsequent mesoporous biochar preparation but also demonstrated the application potentials of MBCX as an environment benign Cr(VI) adsorbent.

Synthesized bioadsorbent from fish scale for chromium (III) removal

Presence of heavy metal in industrial wastewater is hazardous to the surrounding environment. Biosorption of heavy metal is an effective technology for the treatment of industrial wastewater. This research work has been carried out on removal of chromium (III) metal ions by employing waste fish scales as bioadsorbent. A batch adsorption process was carried out with different adsorbent dosage, solution pH and contact time. The results show the highest 99.7518 % chromium (III) metal ions at bioadsorbent dosage 0.8 g, pH of the solution 5 and contact time 90 min, initial concentration 150 mg/l chromium ion. The adsorption isotherms data fitted well with the Langmuir isotherm model with R² = 0.9998, q_max = 18.3486 mg/g, and R_L = 0.00007325. As well as pseudo-first and second kinetics model was also analyzed for the description of adsorption and found to be well fitted (R² = 1) for adsorption kinetics. The surface properties activated fish scales and chromium loaded fish scale were investigated by scanning electron microscopy, X-ray spectroscopy, Fourier-transform infrared spectroscopy, and thermal analysis and agree with outcomes.

Waste shrimp shell-derived hydrochar as an emergent material for methyl orange removal in aqueous solutions

Shrimp processing and consumption generate large amounts of waste shrimp shell (WSS) rich in chitin and protein. Herein, we successfully synthesized WSS-based hydrochar (WSH) adsorbent through deproteinization and deacetylation followed by hydrothermal carbonization (HTC) and acid washing. For comparison, another hydrochar (CCH) adsorbent was synthesized from HTC of commercial chitosan under identical conditions. Specifically, WSH contained rich nitrogen-containing functional groups with a long aliphatic chains structure. Acid etching of calcium carbonate in WSS led to a higher specific surface area of WSH (12.65 m²/g) which was nearly 6 times higher than that of CCH (2.13 m²/g). The lower deacetylation degree of WSH was responsible for higher amide I and amino groups retained therein. Under an optimal initial solution pH of 4.0, WSH could rapidly achieve a superb adsorption capacity of 755.08 mg/g for methyl orange molecule. Moreover, the adsorption process followed a pseudo-second-order kinetics model and was well described by a monolayer adsorption pattern based on the Langmuir isotherm model with correlation coefficients higher than 0.9989. Prominent adsorption performance of WSH for methyl orange was mainly attributed to electrostatic interactions, while steric hindrance effect had a detrimental impact on the adsorption capacity of CCH. Superb adsorption capacity and excellent regeneration performance suggest WSH could be a promising and affordable adsorbent candidate for anionic dye removal.

Hexavalent chromium removal from aqueous solution by adsorption on modified zeolites coated with Mg-layered double hydroxides

In this study, MgAl-LDHs and MgFe-LDHs were synthesized via co-precipitation method and in situ coated on pre-washed zeolites through dipping process in beaker. The obtained modified zeolites and original zeolites were utilized as substrates of constructed rapid infiltration systems (CRIS) to remove hexavalent chromium (Cr(VI)) in wastewater. Micro-morphology features and chemical composition of zeolites before and after modification were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray fluorescence spectrometer (XRF). The SEM, XRD, and XRF results demonstrated the feasibility of LDHs coated on the surface of the original zeolites. Purification experiments in simulated CRIS showed that the Cr(VI) removal rates of zeolites/MgAl-LDHs increased by 110.03% on average every concentration (0.5-16 mg L^-1) compared with the original zeolites under 24-h HRT. The adsorption capacity of zeolites/MgAl-LDHs reached 66.98 mg kg^-1 at 32 mg L^-1 initial Cr(VI) concentration, which is nearly twice that of the original zeolites (33.24 mg kg^-1) and 1.5 times higher than that of zeolites/MgFe-LDHs (42.01 mg kg^-1). Isothermal adsorption tests showed that the Freundlich isotherm equations gave better fitting to the adsorption process. And zeolites/MgAl-LDHs showed a best fit with pseudo-second-order model which meant that the adsorption of Cr(VI) by zeolites/MgAl-LDHs was dominated by chemisorption. Thermodynamic parameters showed that the process of adsorption for the three substrates was spontaneous and endothermic intrinsically. Zeolites/MgAl-LDHs also displayed nearly 60% desorption rate with low concentration eluent (0.01 mol L^-1 NaCl). Therefore, zeolites/MgAl-LDHs were chosen out as an optimal substrate for removing Cr(VI) from wastewater in CRIS. Graphical Abstract.

Cr(VI) removal from soils and groundwater using an integrated adsorption and microbial fuel cell (A-MFC) technology

Remediation of hexavalent chromium [Cr(VI)] has been widely studied for its high mobility and toxicity. As Cr(VI) migrates in natural environment, both soils and groundwater are contaminated simultaneously. In the present study, a novel reactor combining adsorption and microbial fuel cell (A-MFC) using Platanus acerifolia leaves was developed for removing Cr(VI) from groundwater and soils. When initial Cr(VI) concentration was 50 mg/L, the adsorption efficiency of A-MFC achieved 98% after 16 h. Afterwards, the leaves were used for fabricating an MFC-integrated leaching reactor. The A-MFC significantly improved the overall Cr(VI) removal efficiency through leaching and 40% of Cr(VI) in the soil column was removed. The electrical voltage and current of A-MFC reactor achieved averagely 343 mV and 141 μA to maintain the system operation without extra energy supply. This novel A-MFC reactor is an environmentally friendly technology which achieved efficient Cr(VI) removal from groundwater and soils using natural materials, proving the concept that integrated self-remediation of Cr(VI) in contaminated soil and groundwater with natural material and energy.

Single-step pyrolysis of phosphoric acid-activated chitin for efficient adsorption of cephalexin antibiotic

Cephalexin (CFX) antibiotic, a potent pharmaceutical water pollutant, was efficiently removed by activated carbon (AC) derived from a single-step pyrolysis of phosphoric acid-activated chitin. Experimental conditions such as temperature, CFX initial concentration, and solution pH were screened in batch adsorption. Phosphoric acid activation of chitin and subsequent pyrolysis tailored the Brunauer-Emmett-Teller surface area, total pore volume, and average pore diameter to 1199.02 m²/g, 0.641 cm³/g, and 21.37 Å, respectively. The Langmuir isotherm adequately described the equilibrium data for CFX adsorption on chitin-AC, with an R² of 0.99 and a monolayer capacity of 245.19 mg/g at 50 °C. Chitin-AC showed higher adsorption capacity compared with other ACs derived from industrial and agricultural precursors. When activated by phosphoric acid, chitin-AC featured functional multi-sites for vast antibiotic adsorption treatment. Overall, chitin-AC could be a promising adsorbent for removal of CFX.

Adsorption for copper(II) ion with chitosan-SP/PET composite adsorbent enhanced by electric field

A method combining adsorption with electric field-driven ion enrichment to remove the trace metal ions in wastewater was investigated. Composite adsorbent prepared from chitosan (CS) and sodium phytate (SP) supported into polyethylene glycol terephthalate (PET) nonwoven fabric by nonsolvent induced phase separation was employed and located near the cathode in a pair of titanium plate electrodes. Results showed the removal rate of copper ions (Cu(II)) adsorbed onto CS-SP/PET adsorbent was increased from 56% to 88% for 10 mg L−1 Cu(II) solution when the applied voltage was from 0 to 1.2 V. The adsorption behavior was well correlated with the Langmuir isotherm model. And adsorption process fitted well for pseudo-second-order kinetic equation, suggesting that chemical adsorption was rate-limiting step. And the energy consumption was economical, about 4.35 × 10−3 kW·h for 1 m3 of water with 10 mg L−1 Cu(II). It was suggested that the adsorption performance for Cu(II) with CS-SP/PET adsorbent was enhanced due to the enrichment of Cu(II) under electric field. This work provides a new way to remove trace heavy metal ions from wastewater.

Enhanced hexavalent chromium removal by activated carbon modified with micro-sized goethite using a facile impregnation method

In this study, activated carbon (AC) was modified with micro-sized geothite (mFeOOH) using a facile and cost-effective impregnation method for enhanced Cr(VI) removal from aqueous solutions. X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis showed that FeOOH particles with a diameter of 0.1-1 μm were dispersed homogeneously on the surfaces and pores of the AC. Fourier transform infrared spectrum (FTIR) and X-ray photoelectron spectra (XPS) analysis indicated that Cr(VI) was easily adsorbed onto the mFeOOH and reduced to Cr(III) by the AC, eventually deposited as Cr(III)-Fe(III) hydroxides (e.g., (Cr_xFe_1-x)(OH)₃). Hence, the mFeOOH@AC achieved a significantly higher Cr(VI) removal efficiency of 90.4%, 4.5 times of that the AC. The adsorption of Cr(VI) onto the mFeOOH@AC agreed well with the Langmuir adsorption model, demonstrating that the adsorption process was controlled by monolayer adsorption. This adsorption process also followed the pseudo second-order kinetics and the adsorption rate constant K₂ was determined to be 0.013 g/mg·min. The Cr(VI) removal efficiency decreased with pH values as the adsorption process was highly pH-dependent. After the desorption-adsorption process by 0.1 M HCl solution for 4 cycles, the removal efficiency of Cr(VI) was still kept up to 75.1%, indicating that the mFeOOH@AC has a good stability and can be easily regenerated. In addition, the mFeOOH@AC also exhibited a promising potential for reutilization since a Cr(VI) removal efficiency of 85.4% was achieved after stripping all the mFeOOH and Cr(III)-Fe(III) hydroxides by 1 M HCl solution and regeneration with mFeOOH. We demonstrate that the modified AC with micro-sized goethite can remarkably enhance its ability for Cr(VI) removal in water treatment.