Temperature shapes the microbiota in anaerobic digestion and drives efficiency to a maximum at 45 °C

Insight into physico-chemical properties and microbial community structure of biogas slurry from household biogas plants of sub-Himalaya for its implications in improved biogas production

Numerous metagenomics studies, conducted in both full-scale anaerobic digesters and household biogas plants, have shed light on the composition and activity of microbial flora essential for optimizing the performance of biogas reactors, underscoring the significance of microbial community composition in biogas plant efficiency. Although the efficiency of household biogas plants in the sub-Himalayan region has been reported, there is no literature evidence on the microbial community structure of such household biogas plants in the sub-Himalayan region. The current study evaluated the physico-chemical properties and bacterial community structure from the slurry samples of household biogas plants prevalent in the sub-Himalayan region. The slurry samples were observed to be rich in nutrients; however, their carbon and nitrogen contents were higher than the recommended standard values of liquid-fermented organic manure. The species richness and diversity indices (Chao1, Shannon, and Simpson) of household biogas plants were quite similar to the advanced biogas reactors operating at mesophilic conditions. 16S rRNA gene amplicon sequencing reveals microbial diversity, showing a higher abundance of Firmicutes (70.9%) and Euryarchaeota (9.52%) in advanced biogas reactors compared to household biogas plants. Microbial analysis shows a lack of beneficial microbes for anaerobic digestion, which might be the reason for inefficient biogas production in household biogas plants of the sub-Himalayan region. The lack of efficient bacterial biomass may also be attributed to the digester design, feedstock, and ambient temperatures. This study emphasized the establishment of efficient microbial consortia for enhanced degradation rates that may increase the methane yield in biogas plants.

Improved biological methanation using tubular foam-bed reactor

BACKGROUND

Power-to-gas is the pivotal link between electricity and gas infrastructure, enabling the broader integration of renewable energy. Yet, enhancements are necessary for its full potential. In the biomethanation process, transferring H2 into the liquid phase is a rate-limiting step. To address this, we developed a novel tubular foam-bed reactor (TFBR) and investigated its performance at laboratory scale.

RESULTS

A non-ionic polymeric surfactant (Pluronic® F-68) at 1.5% w/v was added to the TFBR's culture medium to generate a stabilized liquid foam structure. This increased both the gas-liquid surface area and the bubble retention time. Within the tubing, cells predominantly traveled evenly suspended in the liquid phase or were entrapped in the thin liquid film of bubbles flowing inside the tube. Phase (I) of the experiment focused primarily on mesophilic (40 °C) operation of the tubular reactor, followed by phase (II), when Pluronic® F-68 was added. In phase (II), the TFBR exhibited 6.5-fold increase in biomethane production rate (MPR) to 15.1 ( L CH 4 /L R /d) , with a CH4 concentration exceeding 90% (grid quality), suggesting improved H2 transfer. Transitioning to phase (III) with continuous operation at 55 °C, the MPR reached 29.7L CH 4 /L R /d while maintaining the grid quality CH4. Despite, reduced gas-liquid solubility and gas-liquid mass transfer at higher temperatures, the twofold increase in MPR compared to phase (II) might be attributed to other factors, i.e., higher metabolic activity of the methanogenic archaea. To assess process robustness for phase (II) conditions, a partial H2 feeding regime (12 h 100% and 12 h 10% of the nominal feeding rate) was implemented. Results demonstrated a resilient MPR of approximately 14.8L CH 4 /L R /d even with intermittent, low H2 concentration.

CONCLUSIONS

Overall, the TFBR's performance plant sets the course for an accelerated introduction of biomethanation technology for the storage of volatile renewable energy. Robust process performance, even under H2 starvation, underscores its reliability. Further steps towards an optimum operation regime and scale-up should be initiated. Additionally, the use of TFBR systems should be considered for biotechnological processes in which gas-liquid mass transfer is a limiting factor for achieving higher reaction rates.

Temperature drives microbial communities in anaerobic digestion during biogas production from food waste

Resource depletion and climate changes due to human activities and excessive burning of fossil fuels are the driving forces to explore alternatives clean energy resources. The objective of this study was to investigate the potential of potato peel waste (PPW) at various temperatures T15 (15 °C), T25 (25 °C), and T35 (35 °C) in anaerobic digestion (AD) for biogas generation. The highest biogas and CH4 production (117 mL VS-g and 74 mL VS-g) was observed by applying 35 °C (T35) as compared with T25 (65 mL VS-g and 22 mL VS-g) on day 6. Changes in microbial diversity associated with different temperatures were also explored. The Shannon index of bacterial community was not significantly affected, while there was a positive correlation of archaeal community with the applied temperatures. The bacterial phyla Firmicutes were strongly affected by T35 (39%), whereas Lactobacillus was the dominant genera at T15 (27%). Methanobacterium and Methanosarcina, as archaeal genera, dominated in T35 temperature reactors. In brief, at T35, Proteiniphilum and Methanosarcina were positively correlated with volatile fatty acids (VFAs) concentration. Spearman correlation revealed dynamic interspecies interactions among bacterial and archaeal genera; facilitating the AD system. This study revealed that temperature variations can enhance the microbial community of the AD system, leading to increased biogas production. It is recommended for optimizing the AD of food wastes.

Meso- and thermophilic posttreatment of press water coming from a thermophilic municipal solid waste digester

An efficient biogas production out of organic (waste) materials is important to contribute to a carbon-neutral future. In this study, thermophilic press water (PW) coming from an organic fraction of the municipal solid waste digester was further digested in a thermo- and mesophilic posttreatment approach using two semicontinuous 14 L digesters. The results showed that the PW can still have considerable high biogas potential-at least during the touristic high season in central Europe. The change in temperature led to an increase in volatile fatty acid concentrations and a decrease in biogas production in the mesophilic approach in the first days. However, the losses in biogas production at the beginning could be compensated thus there were no considerable differences in biogas production between thermo- and mesophilic posttreatment at the end of incubation. This can most probably be contributed to a change in the microbial community, and potentially problematic intermediates like valerate could be better degraded in the mesophilic reactor. Especially the abundance of representatives of the phylum Bacteroidota, like Fermentimonas spp., increased during mesophilic anaerobic digestion.

Co-enhancing effects of zero valent iron and magnetite on anaerobic methanogenesis of food waste at transition temperature (45 °C) and various organic loading rates

Deoiling of food waste (FW) after hydrothermal pretreatment occurs at high temperatures, and more energy is required for substrate cooling before the anaerobic digestion (AD) process. AD at the transition temperature (for example 45 °C) is good for energy saving and carbon emission reducing when treating deoiling FW. However, the metabolic activity of methanogens must increase at the transition temperatures. This study proposes the use of zero-valent iron (Fe0) and magnetite (Fe3O4) to boost CH4 yield from deoiling FW. The results showed a co-enhancing effect on CH4 yield upgradation when using Fe0 and Fe3O4 simultaneously, and the highest CH4 yield reached 536.23 mLCH4/gVS, which was 67.5 % higher than that of Fe0 alone (320.14 mLCH4/gVS). In addition, a high organic loading was favorable for increasing the CH4 yield from deoiling FW. Microbial diversity analysis suggested that the dominant methanogenic pathway at 45 °C was hydrogenotrophic methanogenesis. Herein, a potential metabolic pathway analysis revealed that the co-enhancing effects of Fe0 and Fe3O4 enhanced syntrophic methanogenesis and possibly boosted electron transfer efficiency.

High body temperature increases gut microbiota-dependent host resistance to influenza A virus and SARS-CoV-2 infection

Fever is a common symptom of influenza and coronavirus disease 2019 (COVID-19), yet its physiological role in host resistance to viral infection remains less clear. Here, we demonstrate that exposure of mice to the high ambient temperature of 36 °C increases host resistance to viral pathogens including influenza virus and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). High heat-exposed mice increase basal body temperature over 38 °C to enable more bile acids production in a gut microbiota-dependent manner. The gut microbiota-derived deoxycholic acid (DCA) and its plasma membrane-bound receptor Takeda G-protein-coupled receptor 5 (TGR5) signaling increase host resistance to influenza virus infection by suppressing virus replication and neutrophil-dependent tissue damage. Furthermore, the DCA and its nuclear farnesoid X receptor (FXR) agonist protect Syrian hamsters from lethal SARS-CoV-2 infection. Moreover, we demonstrate that certain bile acids are reduced in the plasma of COVID-19 patients who develop moderate I/II disease compared with the minor severity of illness group. These findings implicate a mechanism by which virus-induced high fever increases host resistance to influenza virus and SARS-CoV-2 in a gut microbiota-dependent manner.

Performance of the UASB reactor during wastewater treatment and the effect of the biogas bubbles on its hydrodynamics

A lab-scale Upflow Anaerobic Sludge Blanket (UASB) reactor was used as a model for evaluating synthetic and complex industrial wastewater treatment, using a solar heater to control temperature. Also, hydrodynamics was assessed using the Computational Fluid Dynamics (CFD) method. Initially, the UASB reactor was operated with synthetic wastewater at Hydraulic Retention Time (HRT) of 24 h in 20 ± 2 °C and 30 ± 2 °C to measure the biogas bubbles production for CFD study. COD removal efficiencies of 85 ± 3% and 95 ± 3%, respectively, with production of 27 and 39 ml CH₄/h, correspondingly, were observed. After that, the reactor was fed with complex industrial wastewater. It was evaluated at 24 h in both temperatures. At 30 °C, low COD removal efficiency was observed, being 48 ± 13%, with methane production of 20 ± 3 ml CH₄/h. The plug flow pattern was observed in the CFD modelling at HRT of 24 h and 20 °C without considering biogas bubbles interaction. Similar hydrodynamic behaviour was observed at HRT of 24 h and 30 °C. Nonetheless, when biogas bubbles were considered in the CFD modelling, hydrodynamics significantly changed, passing from a plug flow to a complete mix flow pattern.

Decentralised system for demand-oriented collection of food waste - Assessment of biomethane potential, pathogen development and microbial community structure

Enormous amounts of food waste (FW) are produced worldwide, requiring efficient disposal strategies, both economically and ecologically. Anaerobic digestion to produce biomethane is among the most promising strategies, but requires proper solutions for storage and delivery of the waste material. Here, a decentralized system for demand-oriented FW storage and its practical usability was assessed. FW was stored under batch and fed-batch strategies at 5 °C, 20 °C and 30 °C for 28 days. The results showed that FW can be stored without cooling since bacterially produced lactic acid rapidly stabilized the material and inactivated pathogens. While FW storage worked well under all storage conditions and strategies, 16S analysis revealed a distinct microbiota, which was highly characteristic for each storage temperature. Moreover, FW storage had no negative impact on methane yield and stored FW contained readily degradable substances for demand-oriented biogas production.

Two problems in one shot: Vinasse and glycerol co-digestion in a thermophilic high-rate reactor to improve process stability even at high sulfate concentrations

Anaerobic co-digestion (AcoD) of sugarcane vinasse and glycerol can be profitable because of the destination of two biofuel wastes produced in large quantities in Brazil (ethanol and biodiesel, respectively) and the complementary properties of these substrates. Thus, the objective of this study was to assess the effect of increasing the organic loading rate (OLR) from 2 to 20 kg COD m^-3 d^-1 on the AcoD of vinasse and glycerol (50 %:50 % on a COD basis) in a thermophilic (55 °C) anaerobic fluidized bed reactor (AFBR). The highest methane production rate was observed at 20 kg COD m^-3 d^-1 (8.83 L CH₄ d^-1 L^-1), while the methane yield remained stable at around 265 NmL CH₄ g^-1 COD_rem in all conditions, even when influent vinasse reached 1811 mg SO₄^2- L^-1 (10 kg COD m^-3 d^-1). Sulfate was not detected in the effluent. Bacterial genera related to sulfate removal, such as Desulfovibrio and Desulfomicrobium, were observed by means of shotgun metagenomic sequencing at 10 kg COD m^-3 d^-1, as well as the acetoclastic archaea Methanosaeta and prevalence of genes encoding enzymes related to acetoclastic methanogenesis. It was concluded that process efficiency and methane production occurred even in higher sulfate concentrations due to glycerol addition.

Monthly dynamics of microbial communities and variation of nitrogen-cycling genes in an industrial-scale expanded granular sludge bed reactor

Introduction

The expanded granular sludge bed (EGSB) is a major form of anaerobic digestion system during wastewater treatment. Yet, the dynamics of microbial and viral communities and members functioning in nitrogen cycling along with monthly changing physicochemical properties have not been well elucidated.

Methods

Here, by collecting the anaerobic activated sludge samples from a continuously operating industrial-scale EGSB reactor, we conducted 16S rRNA gene amplicon sequencing and metagenome sequencing to reveal the microbial community structure and variation with the ever-changing physicochemical properties along within a year.

Results

We observed a clear monthly variation of microbial community structures, while COD, the ratio of volatile suspended solids (VSS) to total suspended solids (TSS) (VSS/TSS ratio), and temperature were predominant factors in shaping community dissimilarities examined by generalized boosted regression modeling (GBM) analysis. Meanwhile, a significant correlation was found between the changing physicochemical properties and microbial communities (p <0.05). The alpha diversity (Chao1 and Shannon) was significantly higher (p <0.05) in both winter (December, January, and February) and autumn (September, October, and November) with higher organic loading rate (OLR), higher VSS/TSS ratio, and lower temperature, resulting higher biogas production and nutrition removal efficiency. Further, 18 key genes covering nitrate reduction, denitrification, nitrification, and nitrogen fixation pathways were discovered, the total abundance of which was significantly associated with the changing environmental factors (p <0.05). Among these pathways, the dissimilatory nitrate reduction to ammonia (DNRA) and denitrification had the higher abundance contributed by the top highly abundant genes narGH, nrfABCDH, and hcp. The COD, OLR, and temperature were primary factors in affecting DNRA and denitrification by GBM evaluation. Moreover, by metagenome binning, we found the DNRA populations mainly belonged to Proteobacteria, Planctomycetota, and Nitrospirae, while the denitrifying bacteria with complete denitrification performance were all Proteobacteria. Besides, we detected 3,360 non-redundant viral sequences with great novelty, in which Siphoviridae, Podoviridae, and Myoviridae were dominant viral families. Interestingly, viral communities likewise depicted clear monthly variation and had significant associations with the recovered populations (p <0.05).

Discussion

Our work highlights the monthly variation of microbial and viral communities during the continuous operation of EGSB affected by the predominant changing COD, OLR, and temperature, while DNRA and denitrification pathways dominated in this anaerobic system. The results also provide a theoretical basis for the optimization of the engineered system.

Coupled mechanism of enhanced and inhibitory effects of nanoscale zero-valent iron on methane production and antibiotic resistance genes in anaerobic digestion of swine manure

In this study, the turning point for nanoscale zero-valent iron's (NZVI) promotion and inhibition effects of methane production coupled with the reduction of antibiotic resistance genes (ARGs) was investigated. Adding 150 mmol/L NZVI increased methane production by maximum of 23.8 %, which was due to the chemical reaction producing H₂ and enhancement of direct interspecies electron transfer (DIET) by NZVI. NZVI350 dramatically repressed methane generation by 48.0 %, which might be associated with the large quantity of reactive oxygen species (ROS) and excessive H₂ inhibiting the functioning of microorganisms. The fate of ARGs was significantly related to daily methane production, indicating that the more methane production finally generated, the less the abundance of ARGs at last left. The reduction of ARGs was enhanced by maximum of 61.0 %, which was attributed to the inhibition of vertical gene transfer (VGT) and horizontal gene transfer (HGT) caused by steric hindrance associated with NZVI corrosion.

Current development and perspectives of anaerobic bioconversion of crop stalks to Biogas: A review

As one of the most abundant biomass resources, crop stalks are great potential feedstock available for anaerobic digestion (AD) to produce biogas. However, the specific physical properties and complex chemical structures of crop stalks form strong barriers to efficient AD bioconversion. To overcome these problems, many efforts have been made over the past few years. This paper reviewed recent research in the evolving field of anaerobic bioconversion of crop stalks and was focused on three critical aspects affecting AD performance: various pretreatment methods and their effects on the improvement of crop stalk biodegradability, determination of specific AD operation parameters for crop stalks, and development of AD technologies. Finally, recommendations on the future development of crop stalk AD were proposed.

Residual municipal solid waste as co-substrate at wastewater treatment plants: An assessment of methane yield, dewatering potential and microbial diversity

Separately collected organic fraction of municipal solid waste, also known as biowaste, is typically used to fill the available capacity of digesters at wastewater treatment plants. However, this approach might impair the use of the ensuing digestate for fertilizer production due to the presence of sewage sludge, a contaminated substrate. Worldwide, unsorted municipal solid household waste, i.e. residual waste, is still typically disposed of in landfills or incinerated, despite its high content of biodegradables and recyclables. Once efficiently separated from residual waste by mechanical processes, the biodegradables might be appropriate to substitute biowaste at wastewater treatment plants. Thus, the biowaste would be available for fertilizer production and contribute to a reduction in the demand on non-renewable fertilizers. This study aimed at determining the technical feasibility of co-digesting the mechanically separated organic fraction of residual waste with sewage sludge. Further, key parameters for the implementation of co-digestion at wastewater treatment plants were determined, namely, degradation of the solids and organics, specific methane production, flocculant demand, and dewatered sludge production. The microbial community and diversity in both mono- and co-digestion was also investigated. Semi-continuous laboratory scale experiments showed that the co-substrate derived from the residual waste provided a stable anaerobic co-digestion process, producing 206 to 245 L of methane per kg of volatiles solids added to the digester. The dewaterability of the digestate increased by 4.8 percentage points when the co-substrate was added; however, there was also an increase in the flocculant demand. The specific dewatered sludge production was 955 kg per ton of total solids of co-substrate added to the digester. Amplicon sequencing analysis provided a detailed insight into the microbial communities, which were primarily affected by the addition of co-substrate. The microbiota was fully functional and no inhibition or problems in the anaerobic digestion process were observed after co-substrate addition.

Zero valent iron improved methane production and specifically reduced aminoglycoside and tetracycline resistance genes in anaerobic digestion

It is unadvisable to discuss the antibiotic resistance genes (ARGs) reduction in anaerobic digestion (AD) system neglecting its main purpose-methane production. The methane production improvement coupling with antibiotic resistance genes (ARGs) reduction in anaerobic digestion (AD) by zero valent iron (ZVI) were simultaneously investigated. Whether the role of ZVI on the ARGs fate was random or specific was clarified through the high-throughput qPCR (HT-qPCR). Results indicated that ZVI improved methane production and ARGs reduction by 23.9% and 25.0%, respectively. The improved methane production was associated with chemical reaction and variances of microbial community caused by ZVI, where DIET between Petrimonas, Clostridium and Syntrophomonas, Methanosarcina was established along with ACAS being enriched. ZVI specifically, not randomly, facilitated the reduction of aminoglycoside resistance genes of antibiotic inactivation and tetracycline resistance genes of ribosomal protection proteins. The specifical reduction could be attributed to enzyme activity inhibition and intracellular ionic disturbance caused by higher amounts of ZVI, although most of ARGs fate could be well explained by microbial community which contributed the most to ARGs dynamics as a whole. ZVI-based AD was a promising way for the improvement of methane production coupling ARGs reduction.

Effect of temperature on the persistence of fecal bacteria in ambient anaerobic digestion systems treating swine manure

This study aimed to explore the effect of temperature on the persistence of fecal bacteria by multiple approaches in ambient anaerobic digestion systems treating swine manure. Both lab-scale (15 °C, 20 °C, and 25 °C) and field (26 °C on average) studies were conducted by high-throughput sequencing and culture-based methods. A community-wide Bayesian SourceTracker method was used to identify and estimate the fecal bacterial proportion in anaerobic effluent. High proportional contributions of fecal bacteria were observed in effluent at 15 °C (73%) and 20 °C (75%), while less was found at 25 °C (19%). This was further verified by a field study (23%) and an anaerobic reactor study at 37 °C (0.01%). To explore the potential reasons for differences in fecal bacterial proportions, bacterial taxa were divided into "lost" and "survivor" taxa in manure waste by LEfSe. The "survivor" taxa abundance was positively correlated with SourceTracker proportion (r = 0.913, P = 0.001), but negatively correlated with temperature (r = -0.826, P = 0.006). In addition, biomarkers in effluent were divided into "enriched" and "de novo" taxa. "Enriched" taxa, including acidogenic and acetogenic bacteria, were found at all temperatures, whereas taxa related to organic degradation were multiplied "de novo" at 25 °C. Variation partition analysis showed that temperature could explain 30% of variations in effluent bacterial community. Moreover, coliforms isolated from the manure and effluents at 15 °C and 20 °C were also phylogenetically related. This study provided comprehensive insight into the impact of temperature on the persistence of fecal bacteria in anaerobic effluent, with temperatures over 25 °C recommended to reduce fecal pollution.

The role of waste management in reducing bioplastics' leakage into the environment: A review

Bioplastics are becoming more and more widespread as substitutes for petroleum-derived plastics due to their biodegradability. Bioplastics degradation under different environments has been described and reported to depend mainly on bioplastics' compositions and the environmental conditions. Incomplete degradation during waste management processes and leakage of bioplastics into the environment are becoming major concerns that need to be further investigated. In this context, the present paper aimed to review recent literature dealing with biodegradation of bioplastics under industrial (e.g. anaerobic digestion and composting) and natural (e.g. soil and water) environments, and to link it to the potential bioplastics' leakage into the environment. Reviewed data were used to estimate the potential role of waste management processes in decreasing the potential leakage of bioplastics. Depending on bioplastics' type and processing conditions, waste management can effectively reduce bioplastics' potential leakage, decreasing the concentration of these materials that can reach the natural environments.

Indicative Marker Microbiome Structures Deduced from the Taxonomic Inventory of 67 Full-Scale Anaerobic Digesters of 49 Agricultural Biogas Plants

There are almost 9500 biogas plants in Germany, which are predominantly operated with energy crops and residues from livestock husbandry over the last two decades. In the future, biogas plants must be enabled to use a much broader range of input materials in a flexible and demand-oriented manner. Hence, the microbial communities will be exposed to frequently varying process conditions, while an overall stable process must be ensured. To accompany this transition, there is the need to better understand how biogas microbiomes respond to management measures and how these responses affect the process efficiency. Therefore, 67 microbiomes originating from 49 agricultural, full-scale biogas plants were taxonomically investigated by 16S rRNA gene amplicon sequencing. These microbiomes were separated into three distinct clusters and one group of outliers, which are characterized by a specific distribution of 253 indicative taxa and their relative abundances. These indicative taxa seem to be adapted to specific process conditions which result from a different biogas plant operation. Based on these results, it seems to be possible to deduce/assess the general process condition of a biogas digester based solely on the microbiome structure, in particular on the distribution of specific indicative taxa, and without knowing the corresponding operational and chemical process parameters. Perspectively, this could allow the development of detection systems and advanced process models considering the microbial diversity.

Relative Weight of Organic Waste Origin on Compost and Digestate 16S rRNA Gene Bacterial Profilings and Related Functional Inferences

Even though organic waste (OW) recycling via anaerobic digestion (AD) and composting are increasingly used, little is known about the impact of OW origin (fecal matters and food and vegetable wastes) on the end products' bacterial contents. The hypothesis of a predictable bacterial community structure in the end products according to the OW origin was tested. Nine OW treatment plants were selected to assess the genetic structure of bacterial communities found in raw OW according to their content in agricultural and urban wastes and to estimate their modifications through AD and composting. Two main bacterial community structures among raw OWs were observed and matched a differentiation according to the occurrences of urban chemical pollutants. Composting led to similar 16S rRNA gene OTU profiles whatever the OW origin. With a significant shift of about 140 genera (representing 50% of the bacteria), composting was confirmed to largely shape bacterial communities toward similar structures. The enriched taxa were found to be involved in detoxification and bioremediation activities. This process was found to be highly selective and favorable for bacterial specialists. Digestates showed that OTU profiles differentiated into two groups according to their relative content in agricultural (manure) and urban wastes (mainly activated sludge). About one third of the bacterial taxa was significantly affected by AD. In digestates of urban OW, this sorting led to an enrichment of 32 out of the 50 impacted genera, while for those produced from agricultural or mixed urban/agricultural OW (called central OW), a decay of 54 genera over 60 was observed. Bacteria from activated sludge appeared more fit for AD than those of other origins. Functional inferences showed AD enriched genera from all origins to share similar functional traits, e.g., chemoheterotrophy and fermentation, while being often taxonomically distinct. The main functional traits among the dominant genera in activated sludge supported a role in AD. Raw OW content in activated sludge was found to be a critical factor for predicting digestate bacterial contents. Composting generated highly predictable and specialized community patterns whatever the OW origin. AD and composting bacterial changes were driven by functional traits selected by physicochemical factors such as temperature and chemical pollutants.

The transition temperature (42 °C) from mesophilic to thermophilic micro-organisms enhances biomethane potential of corn stover

Mesophilic and thermophilic digestion has long been considered as preferred temperature ranges for anaerobic digestion. However, in this study, the effects of temperatures (37, 42, 47, and 55 °C) on the biomethane potential of corn stover were conducted with batch experiments, and the highest biomethane potential was at 42 °C. It was inferred that the change of feed materials, e.g., pretreatment caused by acidification (pH 6.0) during the lag time (4 days), was the main driver for higher biomethane potential. The natural pretreatment stimulated by a slight digestive temperature increase to 42 °C can enhance the biomethane potential of corn stover without adding extra acid. Meanwhile, metabolic pathways of methanogens changed from acetoclastic to mixotrophic and hydrogenotrophic methanogenesis. Based on these results, the transition temperature (42 °C) from mesophilic to thermophilic micro-organisms could be a promising option for corn stover anaerobic digestion.

A specious relevance between theory and practice: Insights into temperature parameter and multi-phase strategy of anaerobic digestion of straw

Anaerobic digestion (AD) of straw is a highly complex and dynamic process. The temperature range of mesophilic (30-40 °C) and thermophilic (50-65 °C) are usually recommended in textbook notion. The two-phase strategy is usually applied based on the classical theory, including acidification-phase and methanation-phase. However, both the optimized temperature parameter and the enhanced multi-phase strategy solely focus on the local AD process. A specious relevance between theory and practice during AD process of straw has always been argued. Classical AD theory was not necessarily the sufficient approach to guide the anaerobic biological transformation of straw. More profound investigations of optimum temperature are still needed, uniquely synergistic mechanisms of functional microorganisms, as well as process stability, should be taken into account. Besides, additional research should focus on the matching between the physicochemical properties and process parameters/strategies choosing. A multi-stage operation strategy based on straw material composition is a potential operation approach to improve its efficiency. Furthermore, more comprehensive attention should be paid to the collaborative response mechanism by coupling substrate, temperature, and microbial in complex AD systems for straws.

CoMA - an intuitive and user-friendly pipeline for amplicon-sequencing data analysis

In recent years, there has been a veritable boost in next-generation sequencing (NGS) of gene amplicons in biological and medical studies. Huge amounts of data are produced and need to be analyzed adequately. Various online and offline analysis tools are available; however, most of them require extensive expertise in computer science or bioinformatics, and often a Linux-based operating system. Here, we introduce "CoMA-Comparative Microbiome Analysis" as a free and intuitive analysis pipeline for amplicon-sequencing data, compatible with any common operating system. Moreover, the tool offers various useful services including data pre-processing, quality checking, clustering to operational taxonomic units (OTUs), taxonomic assignment, data post-processing, data visualization, and statistical appraisal. The workflow results in highly esthetic and publication-ready graphics, as well as output files in standardized formats (e.g. tab-delimited OTU-table, BIOM, NEWICK tree) that can be used for more sophisticated analyses. The CoMA output was validated by a benchmark test, using three mock communities with different sample characteristics (primer set, amplicon length, diversity). The performance was compared with that of Mothur, QIIME and QIIME2-DADA2, popular packages for NGS data analysis. Furthermore, the functionality of CoMA is demonstrated on a practical example, investigating microbial communities from three different soils (grassland, forest, swamp). All tools performed well in the benchmark test and were able to reveal the majority of all genera in the mock communities. Also for the soil samples, the results of CoMA were congruent to those of the other pipelines, in particular when looking at the key microbial players.

Optimizing dry anaerobic digestion at pilot scale for start-up strategy and long-term operation: Organic loading rate, temperature and co-digestion

Dry anaerobic digestion (AD) with high total solid content might upgrade conventional wet AD by enhancing digestion and reducing liquid digestate generation, which was not so popular due to lack of adequate knowledge and perceived operational complexity. In this study long term (447 days) pilot scale investigation was performed for various feedstocks including pig manure, corn straw and sludge. It was found dry method was more suitable for reactor start-up than wet method with relieved inhibition. Volatile fatty acid (VFA)/alkalinity (0.1 ~ 0.4) was effective as dry AD system stability indicator. Organic loading rate of 4.8 kg/(m³·d) and temperature of 48 °C was optimized. Co-digestion achieved better volatile solid removal and system stability. Both hydrogenotrophic and acetoclastic methanogens stably existed in rector while hydrogenotrophic obtained higher abundance. This research contributed to understanding of reactor start-up, system stability indicator and optimized operational conditions (organic loading rate and temperature) during dry AD process.

Biomethanation at 45 °C offers high process efficiency and supports hygienisation

The aim of this work was to prove a process temperature of 45 °C as a practical alternative to commonly applied mesophilic (37 °C) and thermophilic (55 °C) anaerobic digestion (AD). Regarding methane production, no differences were found between the three temperature regimes. However, the maximum possible loading rate at 45 °C exceeded that at 37 °C and 55 °C. Pathogen inactivation at 45 °C was higher than at 37 °C and similarly efficient as at 55 °C. At each process temperature, a unique microbial community established. In addition, the archaeome at 55 °C was dominated by hydrogenotrophs, while at 37 °C and 45 °C it was dominated by acetotrophs. For the investigated substrate mixture, liquid cattle manure with wheat straw as co-substrate, 45 °C turned out to be preferable for AD. For other substrates, these findings still need to be confirmed.

Anaerobic digestion

Worldwide waste generation has become a topic of interest since the accumulation of this waste has prompted environmental hazards. Among which, anaerobic digestion provides green and efficient alternate solution for removal of toxic waste and energy production. Therefore, this review emphasizes on the recent data published in 2018 on topics related to anaerobic process, enhancement of biogas production, and fermentation efficiency. Furthermore, more focus was made on the factors influencing anaerobic digestion and the effect of trace elements as ionic salts as well as nanoparticles on overall biogas production, respectively. PRACTITIONER POINTS: Anaerobic digestion provide green and efficient alternate solution to deal with. This review focused on the conditions related to anaerobic process to improve biogas production and fermentation efficiency. The trace elements were focused on how to influence biogas production during anaerobic digestion.

Effects of thermal hydrolytic pre-treatment on biogas process efficiency and microbial community structure in industrial- and laboratory-scale digesters

This study examined the impact of thermal hydrolysis process (THP) pre-treatment on anaerobic co-digestion of wastewater sludge and household waste and assessed whether THP was vital to achieve higher process capacity. Performance data were collected for both industrial- and laboratory-scale digesters and response in microbial community structure was evaluated by Illumina sequencing. Implementation of THP at the industrial-scale plant increased methane yield by 15% and enhanced substrate degradability. Possibility to extend the sludge retention time due to a higher solid content of the substrate, sanitisation of the digestate and improved fertiliser quality of the digestate were other industrial-scale benefits of THP installation. Continuously-fed laboratory-scale digesters were fed THP-treated or untreated substrate at an organic loading rate (OLR) of 5 g volatile solid (VS)/L/day, a feeding rate necessary at the corresponding industrial-scale plant to meet the estimated population increase within the municipality. The results indicated that the plant could have increased the capacity with unimpaired stability independently of THP installation, even though the retention time was significantly shortened during operation with untreated substrate. Microbial community analyses revealed increased contribution of the Clostridia class after THP installation in industrial-scale digesters and positive correlation between Firmicutes:Bacteriodetes and methane yield in all digesters. Differentiated profiles in laboratory-scale digesters indicated that a temperature increase from 37 to 42 °C in association with THP installation and altered substrate composition were strong determining factors shaping the microbial community. Overall, these findings can assist industrial-scale plants in choosing management strategies aimed at improving the efficiency of anaerobic digestion processes.

Effect of applied voltage and temperature on methane production and microbial community in microbial electrochemical anaerobic digestion systems treating swine manure

Microbial electrochemical technology (MET) that can harvest electricity/valuable materials and enhance the efficiency of conventional biological processes through the redox reaction of organic/inorganic compounds has attracted considerable attention. MET-based anaerobic digestion (AD) systems treating swine manure were operated at different applied voltages (0.1, 0.3, 0.5, 0.7, and 0.9 V) and temperatures (25, 35, and 45 °C). Among the MET-based AD systems with different applied voltages at 35 °C, M4 at 0.7 V showed the highest methane production (2.96 m3-CH4/m3) and methane yield (0.64 m3-CH4/kg-VS). The methane production and yield increased with increasing temperature at an applied voltage of 0.7 V. Nevertheless, the MET-based AD systems (LM at 25 °C and 0.7V) showed competitive AD performance (2.33 m3-CH4/m3 and 0.53 m3-CH4/VS) compared with the conventional AD system (35 °C). The microbial community was affected by the applied voltage and temperature, and hydrogenotrophic methanogens such as M. flavescens, M. hungatei, and M. thermautotrophicus were mainly responsible for methane production in MET-based AD systems. Therefore, the methane production can be enhanced by an applied voltage or by direct interspecies electron transfer because M. flavescens and M. thermautotrophicus were especially predominant in cathode of MET-based AD systems. The MET-based AD systems can help enhance biogas production from swine manure with no significant change in methane content. Furthermore, MET-based AD systems will be a promising AD system through low material development and the optimal operation.

Anaerobic Digestion Technology for Methane Production Using Deer Manure Under Different Experimental Conditions

Anaerobic digestion (AD) is an important technology for the treatment of livestock and poultry manure. The optimal experimental conditions were studied, with deer manure as a fermentation material and mushroom residue as an inoculum. At the same time, methane production was increased by adding zeolite and changing the magnetic field conditions. The results showed that a 6% solid content was the best condition for producing methane. The optimal conditions for methane production were obtained by adding 35 g of mushroom residue to 80 g of deer manure at 35 °C. The addition of organic wastewater (OW) improved methane production. The result of improving the methane production factor showed that adding zeolite during the reaction process could increase the methane production rate. When the amount of zeolite was over 8% total solids (TSes), methane production could improve, but the rate decreased. Setting a different magnetic field strength in the AD environment showed that when the distance between the magnetic field and the reactor was 50 mm and the magnetic field strength was 10–50 mT, the methane production increment and the content of methane in the mixed gases increased.