A novel magnetic biochar prepared by K2FeO4-promoted oxidative pyrolysis of pomelo peel for adsorption of hexavalent chromium

Review in application of blast furnace dust in wastewater treatment: material preparation, integrated process, and mechanism

Blast furnace dust (BFD) is the solid powder and particulate matter produced by dust removal process in ironmaking industry. The element composition of BFD is complex, and a direct return to sintering will lead to heavy metal enrichment and blast furnace lining corrosion. In recent years, the application of BFD in wastewater treatment has attracted widespread attention. Based on the mechanisms of action of BFD in wastewater, this paper discusses in detail the application of BFD in iron-carbon micro-electrolysis, biological enhancement, adsorption, flocculation, and Fenton/Fenton-like reactions. Iron oxides and carbon in BFD are key substances. Thus, BFD has great potential as a raw material in wastewater treatment, and the waste utilization of BFD can be realized. However, the difference in elements and composition of BFD limits its large-scale application. We can classify BFD according to different proportions of elements. In the future, it is necessary to focus on the service life of BFD in water and whether it shall bring secondary pollution to water.

Orientation Growth of N-Doped and Iron-Based Metal-Organic Framework and Its Application for Removal of Cr(VI) in Wastewater

A series of NH2-functionalized nano-sized magnetic metal-organic frameworks (MOFs) were prepared in this study for Cr(VI) removal from wastewater. It was observed that not only the morphological, i.e., orientation growth of N-doped and iron-based metal-organic frameworks, but also the adsorption of magnetic MOFs is largely related to the used amount of ammonium hydroxide in preparation. For example, with increasing amounts of ammonium hydroxide used in preparation, the morphology of magnetic MOFs changed from spherical to cube and triangular cone. Moreover, the maximum adsorption capacity of spherical-magnetic MOFs, cubic-magnetic MOFs and triangular cone-magnetic MOFs could be up to 204.08 mg/g, 232.56 mg/g and 270.27 mg/g, respectively. Under optimal conditions, the adsorption process of magnetic MOFs for Cr(VI) was consistent with the pseudo-second-order rate equation (R2 = 1) and Langmuir isotherm model (R2 > 0.99). Therefore, magnetic MOFs developed in this work offered a viable option for the removal of Cr(VI) from wastewater.

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI)

Solid waste and heavy metal pollution are long-term and challenging subjects in the field of environmental engineering. In this study, we propose a sustainable approach to "treating waste with waste" by utilizing the ultramicropore biochar derived from solid waste distiller's grains as a means to remove Cr(VI) from simulated wastewater and wet phosphoric acid. The biochar prepared in this research exhibit extremely high specific surface areas (up to 2973 m2/g) and a well-developed pore structure, resulting in a maximum Cr(VI) adsorption capacity of 426.0 mg/g and over 99% removal efficiency of Cr(VI). Furthermore, the adsorbent can be reused for up to eight cycles without significant reduction in its Cr(VI) adsorption performance. Mechanistic investigations suggest that the exceptional Cr(VI) adsorption capacity can be attributed to the synergistic effect of electrostatic interaction and reduction adsorption. This study offers an alternative approach for the resource utilization of solid waste distiller's grains, and the prepared biochar holds promise for the removal of Cr(VI) from wastewater and wet-process phosphoric acid.

Fe/N co-doped magnetic porous hydrochar for chromium(VI) removal in water: Adsorption performance and mechanism investigation

Four kinds of Fe/N co-doped porous hydrochar were prepared by one/two-step N-doping schemes using microwave/traditional pyrolysis methods for removing Cr(VI) from aqueous phase. Heterocyclic-N was introduced through CO(NH2)2-based hydrothermal carbonization process, which could adjust the electronic structure of the hydrochar framework. Furthermore, Fe0 and Fe3O4 were embedded into hydrochar via carbothermal reduction reaction using FeCl3 as the precursor, which improved the reducibility and magnetism of the material. The modified hydrochar exhibited pH-dependency and rapid kinetic equilibrium, and the maximal adsorption amount of magnetic porous hydrochar obtained by microwave-assisted one-step N-doping (MP1HCMW) reached 274.34 mg/g. Meanwhile, the modified hydrochar had a high tolerance to multiple co-existing ions and the removal efficiency maintained above 73.91 % during five regeneration cycles. Additionally, MP1HCMW efficiently removed Cr(VI) via pore filling, electrostatic attraction, ion exchange, reduction, complexation, and precipitation. Summarily, Fe/N co-doped porous hydrochar was a feasible adsorbent with outstanding remediation potential for Cr(VI)-contaminated water.

Study on improvement of copper sulfide acid soil properties and mechanism of metal ion fixation based on Fe-biochar composite

In this study, Fe modification of bamboo biochar (BC) with ferrate was used to construct a composite soil amendment based on K2FeO4-biochar (Fe-BC) system. Based on soil culture experiments, Fe-BC combined with organic-inorganic materials at the application levels of 3%, 5% and 10% to copper sulfide contaminated acid soil was studied. Adsorption kinetics experiment was used to investigate the adsorption capacity of Fe-modified biochar to heavy metal Cu. The results showed that the pH value of bamboo biochar could be increased by 1.12 units after K2FeO4 modification. Compared with the BC, the adsorption capacity of Cu2+ increased from 190.48 to 276.12 mg/g, which was mainly reflected in single-layer surface adsorption and chemisorption. Pore diffusion, electrostatic interaction and surface interaction are the possible mechanisms of Fe-BC interaction with Cu2+ ions. And the contents of Pb, Cu and Zn in soil leaching state decreased by 59.20%, 65.88% and 57.88%, respectively, at the 10% application level of Fe-BC. In general, the composite modifier based on ferrate and biochar has a positive effect on improving the characteristics of acidic soil in copper mining area.

Recent advances in the synthesis and application of magnetic biochar for wastewater treatment

Magnetic biochar (MBC) is a novel bio-carbon material with both desired properties as adsorbent and magnetic characteristics. This review provides an up-to-date summary and discussion on the latest development of MBC, which covers the progress on its synthesis, application, and techno-economic analysis. The review indicates that the direct hydrothermal synthesis has been catching more research attention to produce MBC due to its mild reaction conditions. Instead of the Fe-loaded MBC, there is a trend of using Mn for the magnetization. For the MBC application, how to improve its adsorption performance for water decontamination, ideally to match that of the biochar (BC) or activated carbon, is important. In addition, more studies on the environmental impacts of MBC and life-cycle assessment decoding the process optimization options are necessary. This review will provide valuable references for the development of MBC and MBC-based materials for wastewater treatment.

Efficient removal of purine compounds from solutions via biomass carbons derived from pomelo peel

The high purine diet could result in the increase of the level of blood uric acid, causing serious health problems such as hyperuricemia, gout, nephropathy and cardiovascular diseases. To find out a safe, cheap and super adsorption material for removing purines in stomach or pretreating high-purine beverages, we used different tissues of pomelo peel to prepare biomass carbon by drying, chemical modification and carbonization and then applied it to remove purine compounds in strong acidic solution, beer and soybean milk. The characteristic analysis of pomelo-peel-derived carbons (PPCs) indicated that the preparation methods significantly affected the structures and adsorption capacities of PPCs. Compared with the biomass carbon derived from bamboo, PPCs exhibited higher adsorption capabilities for purine compounds in strong acidic solution (adsorption rates > 99% in 15 min) and soybean milk (adsorption rates > 56% in 30 min) but slightly lower adsorption capabilities in beer (adsorption rates > 52% in 30 min). In addition, the adsorption capabilities of PPCs for purine compounds in beer and soybean milk were not obviously affected by temperatures. Therefore, PPCs are promising absorbents for applications in removing purine compounds from beverages to produce low-purine, healthier products for treating hyperuricemia. The strong adsorption capabilities of PPCs on purine compounds in strong acidic environment also provides a possibility of using the PPCs as food additives for removing purines in stomach for healthcare applications such as gout prevention after confirming their biosafety.

Oxidative magnetization of biochar at relatively low pyrolysis temperature for efficient removal of different types of pollutants

A novel oxidative magnetization, involving phosphomolybdic acid and Fe(NO3)3 co-promoted pyrolysis, was established to manufacture highly adsorptive magnetic biochars for adsorbing aqueous tetracycline, methylene blue, and Cr6+. The modification of phosphomolybdic acid greatly boosted the formation of γ-Fe2O3 and oxygen containing groups with enhancement of specific surface area and pore volume at 400 °C. Importantly, γ-Fe2O3 was stably fixed on surface in quasi-nanoscale. The oxidized magnetic biochar displayed 631.53, 158.45, 155.13 mg/g adsorption capabilities for tetracycline, methylene blue, and Cr6+ with 22.79 emu/g saturation magnetization, respectively. Oxygen containing groups and quasi-nanoscale γ-Fe2O3 served as key adsorption sites for these pollutants. A general oxidative magnetization was established for manufacturing high-performance magnetic biochar through phosphomolybdic acid/Fe(NO3)3 co-promoted pyrolysis at relatively low temperature.

The Removal of Pollutants from Wastewater Using Magnetic Biochar: A Scientometric and Visualization Analysis

In recent years, the use of magnetic biochar in wastewater treatment has shown significant effects and attracted scholars' attention. However, due to the relatively short research time and the lack of systematic summaries, it is difficult to provide a more in-depth analysis. This study utilizes RStudio and CiteSpace software to comprehensively analyze the research trends and progress of magnetic biochar in wastewater treatment. The analysis of bibliometrics is performed on 551 relevant papers retrieved from the Web of Science, spanning the period between 2011 and 2022. The most influential countries, institutions, journals, disciplinary distribution, and top 10 authors and papers in this field have been identified. The latest dataset has been used for keyword clustering and burst analysis. The results indicated that: (1) Bin Gao is the most influential author in this field, and high-level journals such as Bioresource Technology are more inclined to publish articles in the field of magnetic biochar. (2) Research in this field has predominantly focused on the removal of heavy metals and organic compounds. Keyword burst analysis shows a shift in research direction towards the removal of complex organic pollutants recently. (3) For the future development of magnetic biochar, an environment-friendly approach, economic viability, and joint technology are the directions that need more exploration. Finally, this paper provides a summary of the various adsorption mechanisms of magnetic biochar and several common modification methods, aiming to assist scholars in their research endeavors.

Remediation of cadmium contaminated soil using K2FeO4 modified vinasse biochar

The remediation of cadmium (Cd) contaminated soil is challenging for agricultural practices. In this study, a novel vinasse biochar modified by potassium ferrate (K₂FeO₄) was synthesized to immobilize Cd in agricultural soil. Three biochars [i.e., vinasse biochar (BC), KMnO₄ modified vinasse biochar (MnBC), and K₂FeO₄ modified vinasse biochar (FeBC)] were applied to compare their efficiencies of Cd immobilization. The results showed that the orders of pH, ash content, and functional groups in different biochar were the same following BC < MnBC < FeBC. Scanning electron microscope images showed that the FeBC has more micropores than MnBC and BC. X-ray diffraction identified manganese oxides and iron oxides within MnBC and FeBC, indicating that Mn and Fe were well loaded on the biochar. In the soil-based pot experiment, both MnBC and FeBC significantly reduced soil available Cd by 23-38% and 36-45% compared with the control, respectively (p < 0.05). In addition, the application of BC, MnBC, and FeBC significantly increased the yield, chlorophyll, and vitamin C of Chinese cabbage (p < 0.05), and decreased its Cd uptake compared with the control. Notably, shoot Cd significantly reduced when 2% FeBC was applied (p < 0.05). Overall, using K₂FeO₄ to modify vinasse biochar enriched the surface functional groups and minerals as well as reduced Cd availability in soil and its uptake by the plant. Our study showed that K₂FeO₄ modified vinasse biochar could be used as an ideal amendment for the remediation of Cd-contaminated soil.

Bamboo-derived nitrogen-doping magnetic porous hydrochar coactivated by K2FeO4 and CaCO3 for phenol removal: Governing factors and mechanisms

In this study, a novel nitrogen-doped magnetic Fe-Ca codoped biochar for phenol removal was successfully fabricated via a hydrothermal and coactivation pyrolysis method. A series of adsorption process parameters (K₂FeO₄ to CaCO₃ ratio, initial phenol concentration, pH value, adsorption time, adsorbent dosage and ion strength) and adsorption models (kinetic models, isotherms and thermodynamic models) were determined using batch experiments and various analysis techniques (XRD, BET, SEM-EDX, Raman spectroscopy, VSM, FTIR and XPS) to investigate the adsorption mechanism and metal-nitrogen-carbon interaction. The biochar with a ratio of Biochar: K₂FeO₄: CaCO₃ = 3:1:1 exhibited superior properties for adsorption of phenol and had a maximum adsorption capacity of 211.73 mg/g at 298 K, C₀ = 200 mg/L, pH = 6.0 and t = 480 min. These excellent adsorption properties were due to superior physicomechanical properties (a large specific surface area (610.53 m²/g) and pore volume (0.3950 cm³/g), a well-developed pore structure (hierarchical), a high graphitization degree (I_D/I_G = 2.02), the presence of O/N-rich functional groups and Fe-Ox,Ca-Ox, N-doping, as well as synergistic activation by K₂FeO₄ and CaCO₃). The Freundlich and pseudo-second-order models effectively fit the adsorption data, indicating multilayer physicochemical adsorption. Pore filling and π-π interactions were the predominant mechanisms for phenol removal, and H-bonding interactions, Lewis-acid-base interactions, and metal complexation played an important role in enhancing phenol removal. A simple, feasible approach with application potential to organic contaminant/pollutant removal was developed in this study.

Enhanced Chromium (VI) Adsorption onto Waste Pomegranate-Peel-Derived Biochar for Wastewater Treatment: Performance and Mechanism

Surface chemical modification allows for the rational construction of biochar with desirable structures and functionalities for environment purification. Fruit-peel-derived adsorbing material has been well studied in the adsorption of heavy-metal removal due to its abundance and non-toxicity, but its precise mechanism in removing chromium-containing pollutants remains unclear. Herein, we explored the potential application of engineered biochar prepared from fruit waste via chemical modification to remove chromium (Cr) from an aqueous solution. By synthesizing two types of agricultural residue-derived adsorbents, including pomegranate peel adsorbent (PG) and its modified product, pomegranate-peel-derived biochar (PG-B), via chemical and thermal decomposition methods, we elucidated the adsorption property of Cr(VI) on the studied materials and identified the cation retention mechanism of the adsorption process. Batch experiments and varied characterizations demonstrated that superior activity was exhibited in PG-B, which can contribute to the porous surfaces caused by pyrolysis and effective active sites resulting from alkalization. The highest Cr(VI) adsorption capacity is obtained at pH 4, a dosage of 6.25 g L^-1, and a contact time of 30 min. The maximum adsorption efficiency of 90.50% in a short period (30 min) was obtained on PG-B, while PG reached a removal performance of 78.01% at 60 min. The results from kinetic and isotherm models suggested that monolayer chemisorption dominated the adsorption process. The Langmuir maximum adsorption capacity is 16.23 mg g^-1. This study shortened the adsorption equilibrium time of pomegranate-based biosorbents and presents positive significance in designing and optimizing waste fruit-peel-derived adsorption materials for water purification.

Activated Carbon with Ultrahigh Specific Surface Derived from Bamboo Shoot Shell through K2FeO4 Oxidative Pyrolysis for Adsorption of Methylene Blue

To effectively remove methylene blue (MB) from dye wastewater, a novel activated carbon (BAC) was manufactured through co-pyrolysis of bamboo shoot shell and K₂FeO₄. The activation process was optimized to a temperature of 750 °C and an activation time of 90 min based on its excellent adsorption capacity of 560.94 mg/g with a yield of 10.03%. The physicochemical and adsorption properties of BACs were investigated. The BAC had an ultrahigh specific surface area of 2327.7 cm²/g and abundant active functional groups. The adsorption mechanisms included chemisorption and physisorption. The Freundlich model could be used to describe the isothermal adsorption of MB. The kinetics confirmed that the adsorption of MB belonged to the pseudo-second-order model. Intra-particle diffusion was the main rate-limiting step. The thermodynamic study showed that the adsorption process was endothermic and temperature was beneficial for the improvement of adsorption property. Furthermore, the removal rate of MB was 63.5% after three cycles. The BAC will have great potential for commercial development for purifying dye wastewater.

Adsorption Performance of Methylene Blue by KOH/FeCl3 Modified Biochar/Alginate Composite Beads Derived from Agricultural Waste

In this study, high-performance modified biochar/alginate composite bead (MCB/ALG) adsorbents were prepared from recycled agricultural waste corncobs by a high-temperature pyrolysis and KOH/FeCl3 activation process. The prepared MCB/ALG beads were tested for the adsorption of methylene blue (MB) dye from wastewater. A variety of analytical methods, such as SEM, BET, FTIR and XRD, were used to investigate the structure and properties of the as-prepared adsorbents. The effects of solution pH, time, initial MB concentration and adsorption temperature on the adsorption performance of MCB/ALG beads were discussed in detail. The results showed that the adsorption equilibrium of MB dye was consistent with the Langmuir isothermal model and the pseudo-second-order kinetic model. The maximum adsorption capacity of MCB/ALG−1 could reach 1373.49 mg/g at 303 K. The thermodynamic studies implied endothermic and spontaneous properties of the adsorption system. This high adsorption performance of MCB/ALG was mainly attributed to pore filling, hydrogen bonding and electrostatic interactions. The regeneration experiments showed that the removal rate of MB could still reach 85% even after five cycles of experiments, indicating that MCB/ALG had good reusability and stability. These results suggested that a win-win strategy of applying agricultural waste to water remediation was feasible.

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5-100 mg·L^-1 Cr (VI) with a high flux of 300 L h^-1 m^-2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L^-1, the effluent concentration could still reach drinking water grade (<0.05 mg·L^-1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Highly efficient removal of hexavalent chromium by magnetic Fe-C composite from reed straw and electric furnace dust waste

Reed straw and electric furnace dust (EFD) waste were used to prepare magnetic Fe-C composite (EFD&C) by co-precipitation and high-temperature activation method to remove Cr(VI) from water. The magnetic EFD&C owned a large specific surface (536.61 m²/g) and a porous structure (micropores and mesopores), and had an efficient removal capacity for Cr(VI). Under conditions of pH (2), the addition amount of EFD&C (1 g/L), the adsorption time (760 min), and the temperature (45 °C), the maximum adsorption capacity reached 111.94 mg/g. The adsorption mechanism mainly attributed to chemical adsorption (redox), Cr(VI) reduced to Cr(III) by Fe(II) and Fe(0) (from Fe₃O₄ and Fe components in EFD) and surface functional groups of -OH, C = C, C-C and O-C = O (from biochar), and secondary attributed to physical adsorption, Cr(VI) and Cr(III) (from reduced Cr(VI)) adsorbed into the porous structure of EFD&C. This study provided a feasible solution for the preparation of adsorbents for adsorbing heavy metals from iron-containing metallurgical solid waste and biomass waste, which contributed to reducing the environmental pollution and lowering the cost of adsorbent preparation.

Effective Usage of Biochar and Microorganisms for the Removal of Heavy Metal Ions and Pesticides

The bioremediation of heavy metal ions and pesticides is both cost-effective and environmentally friendly. Microbial remediation is considered superior to conventional abiotic remediation processes, due to its cost-effectiveness, decrement of biological and chemical sludge, selectivity toward specific metal ions, and high removal efficiency in dilute effluents. Immobilization technology using biochar as a carrier is one important approach for advancing microbial remediation. This article provides an overview of biochar-based materials, including their design and production strategies, physicochemical properties, and applications as adsorbents and support for microorganisms. Microorganisms that can cope with the various heavy metal ions and/or pesticides that enter the environment are also outlined in this review. Pesticide and heavy metal bioremediation can be influenced by microbial activity, pollutant bioavailability, and environmental factors, such as pH and temperature. Furthermore, by elucidating the interaction mechanisms, this paper summarizes the microbe-mediated remediation of heavy metals and pesticides. In this review, we also compile and discuss those works focusing on the study of various bioremediation strategies utilizing biochar and microorganisms and how the immobilized bacteria on biochar contribute to the improvement of bioremediation strategies. There is also a summary of the sources and harmful effects of pesticides and heavy metals. Finally, based on the research described above, this study outlines the future scope of this field.

Recycling Pomelo Peel Waste in the Form of Hydrochar Obtained by Microwave-Assisted Hydrothermal Carbonization

Pomelo peel (PP) is a kind of solid waste that is produced in the processing industry of honey pomelo. This study deeply explored the feasibility of recycling PP in the form of hydrochar (HC) by microwave-assisted hydrothermal carbonization (HTC) technology. Under the non-catalytic reaction conditions, the yield of hydrochar initially increased with the rise of reaction temperature (150-210 °C) until it remained relatively stable after 210 °C. Under the CaO-catalytical reaction condition, the yield of hydrochar did not change much at first (150-190 °C) but decreased significantly when the reaction temperature exceeded 190 °C. After the microwave-assisted HTC treatment, the PP-derived HC presented higher aromaticity, carbonization degree, porosity, and caloric value. Compared with raw PP, the nutrients in HC were more stable (conducive to being used as slow-release fertilizer). The application of CaO increased the pH value of HC and effectively promoted the accumulation of phosphorus in HC. The HC produced at 210 °C without any catalyst possessing a high devolatilization ability. Additionally, the HC obtained at 190 °C with CaO as the catalyst presented a high combustion property. In general, PP-derived HC showed great application potential in the field of soil remediation/improvement and solid fuels. This preliminary study would undoubtedly provide some important fundamental understanding of the microwave-assisted HTC of PP.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Ball milling potassium ferrate activated biochar for efficient chromium and tetracycline decontamination: Insights into activation and adsorption mechanisms

Herein, novel Fe-biochar composites (MBC_BM500 and MBC_BM700) were synthesized through K₂FeO₄ co-pyrolysis and ball milling, and were used to eliminate Cr(VI)/TC from water. Characterization results revealed that higher temperature promoted formation of zero-valent iron and Fe₃C on MBC_BM700 through carbothermal reduction between K₂FeO₄ and biochar. The higher specific surface area and smaller particle size of MBC_BM500/700 stemmed from the corrosive functions of K and the ball milling process. And the maximal uptake amount of MBC_BM700 for Cr(VI)/TC was 117.49/90.31 mg/g, relatively higher than that of MBC_BM500 (93.86/84.15 mg/g). Furthermore, ion exchange, pore filling, precipitation, complexation, reduction and electrostatic attraction were proved to facilitate the adsorption of Cr(VI), while hydrogen bonding force, pore filling, complexation and π-π stacking were the primary pathways to eliminate TC. This study provide a reasonable design of Fe-carbon materials for Cr(VI)/TC contained water remediation, which required neither extra modifiers nor complex preparation process.

Novel co-polymerization of polypyrrole/polyaniline on ferrate modified biochar composites for the efficient adsorption of hexavalent chromium in water

It is still a huge challenge to prepare cheap and effective composite materials for removing hexavalent chromium (Cr(VI)) in sewage treatment. In this study, a noval co-polymerization of polypyrrole/polyaniline on ferrate modified biochar (Ppy/PANI/FBC) was fabricated via ferrate-promoted pyrolysis and in-situ oxidative polymerization of pyrrole and aniline molecules to effectively remove Cr(VI) from polluted water. The Ppy/PANI/FBC quickly decreased Cr(VI) concentration from 38.92 to 3.92 mg/L within 400 min, with an efficient removal efficiency (89.92%), which was significantly higher than that of FBC (4.75%), Ppy/FBC (72.30%), and PANI/FBC (42.43%). These results are mainly caused by its conjugated connection and well-dispersion of Ppy and PANI on the surface of a carbon-based material. Meanwhile, the experimental results were in line with the pseudo-second-order kinetic and Freundlich models. The Ppy/PANI/FBC is featured by a high capacity of Cr(VI) adsorption (up to 203.71 mg/g). In addition, it could be adopted for efficiently removing Cr(VI) over a wide pH range (4-9) because of the positively charged nitrogen (-NH^.+- and = N⁺-). The sorption mechanisms of Cr(VI) were identified, including electrostatic interaction with surface protonated nitrogen (N⁺), ion exchange between the doped Cl^- ions and Cr(VI), chemical decrease of the Cr(VI) to Cr(III) by the iron valence cycle and efficient electron transfer of Ppy/PANI/FBC, as well as surface complexation by amine and oxygen-containing groups. More importantly, 97.98% Cr(VI) was efficiently removed in 20 min by coupling a photocatalytic reaction, also providing a novel idea for the practical use of adsorbents in wastewater treatment.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar's performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

Pinecone-derived magnetic porous hydrochar co-activated by KHCO3 and K2FeO4 for Cr(VI) and anthracene removal from water

Herein, magnetic porous pinecone-derived hydrochar (MPHC_MW) co-activated by KHCO₃ and K₂FeO₄ through one-step microwave-assisted pyrolysis was innovatively synthesized for hexavalent chromium (Cr(VI)) and anthracene (ANT) removal from water. The analyses of characterization consequences and co-activation mechanisms not merely proved the high specific surface area (703.97 m²/g) and remarkable microporous structures of MPHC_MW caused by the synergistic chemical activation of KHCO₃ and K₂FeO₄, but also testified successful loading of Fe⁰ and Fe₃O₄ on MPHC_MW by the process of carbothermal reduction between K₂FeO₄ and carbon matrix of hydrochar. The resultant MPHC_MW possessed pH-dependence for Cr(VI), while adsorption for ANT was hardly impacted by the pH of solution. Moreover, the adsorption processes of MPHC_MW could attain equilibrium within 60 min for Cr(VI) and 30 min for ANT with multiple kinetics, and the corresponding adsorption capacity for Cr(VI) and ANT was 128.15 and 60.70 mg/g, respectively. Additionally, the adsorption percentages of MPBC_MW for Cr(VI)/ANT was maintained at 87.87/82.64% after three times of adsorption-desorption cycles. Furthermore, pore filling, complexation, electrostatic interaction, reduction and ion exchange were testified to enhance the removal of Cr(VI), while the ANT removal was achieved via π-π stacking, complexation, pore filling and hydrogen bonding force.

Enhanced chlortetracycline removal by iron oxide modified spent coffee grounds biochar and persulfate system

Chlortetracycline (CTC) is a tetracycline derivative antibiotic that has been widely used in the livestock industry for prophylactic and therapeutic purposes. Effective measures should be taken to decrease the environmental risks associated with CTC-rich waste. Biochar produced by biomass waste showed great potential for organic contaminants removal by adsorption and catalytic degradation. This study prepared iron oxide-modified coffee grounds biochar (CGF) at different temperatures for enhanced CTC removal by adsorption and degradation. The main mechanism for CTC removal was found to be electrostatic interaction. In addition, pore diffusion, hydrogen bonds, and π-π bonds also contributed to CTC adsorption. Maximum CTC adsorption capacity was 223.63 mg/g for CGF800 (CGF prepared at 800 °C pyrolysis). The free radical content of CGF600 (CFG prepared at 600 °C pyrolysis) was higher than CGF800, and there were no significant advantages in using biochar prepared at a higher temperature for persulfate activation. The ion mass-to-charge ratio (M/z) is used to describe the ratio of mass to charge of an ion or peak, which can infer compound structure. The structure of CTC degradation products was analyzed by UPLC-MS, and the M/z values were determined as 444, 273, and 154. Thus, pyrolysis of coffee grounds at higher temperatures increased CTC adsorption capacity, and CGF can indirectly assist in CTC degradation by persulfate activation.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Insights into Cr(VI) removal mechanism in water by facile one-step pyrolysis prepared coal gangue-biochar composite

The acceleration of industrialization has increased the discharge of chromium-containing wastewater, posing serious threat to the eco-environment and human health. To remove Cr(VI) in wastewater and improve resource utilization of solid waste, coal gangue and rape straw were initially used to prepare coal gangue-rape straw biochar (CG-RS) composite. The effects of pyrolysis temperatures, solution pH, coexisting ions of Cr(VI) adsorption were investigated. Different adsorption models combined with site energy analysis were used to explore the adsorption behaviors and mechanisms. The results showed higher pyrolysis temperature (600 °C) prepared CG-RS had a larger adsorption capacity (9.2 mg/g) for Cr(VI) (pH = 5.0). Analysis of XPS indicated that CG-RS successfully loaded with Fe-O and Al-O functional groups, which mainly participated in the reduction of Cr(VI). Site energy analysis further proved that reduction and surface complexation were the main adsorption mechanisms. This study shows an effective removal of Cr(VI) by CG-RS, providing a new way for resource utilization of solid waste.

Enhancing Cd(II) adsorption on rice straw biochar by modification of iron and manganese oxides

Metal oxide-modified biochar showed excellent adsorption performance in wastewater treatment. Iron nitrate and potassium permanganate were oxidative modifiers through which oxygen-containing groups and iron-manganese oxides could be introduced into biochar. In this study, iron-manganese (Fe-Mn) oxide-modified biochar (BC-FM) was synthesized using rice straw biochar, and the adsorption process, removal effect, and the mechanism of cadmium (Cd) adsorption on BC-FM in wastewater treatment were explored through batch adsorption experiments and characterization (SEM, BET, FTIR, XRD, and XPS). Adsorption kinetics showed that the maximum adsorption capacity of BC-FM for Cd(II) was 120.77 mg/g at 298 K, which was approximately 1.5-10 times the amount of adsorption capacity for Cd(II) by potassium-modified or manganese-modified biochar as mentioned in the literature. The Cd(II) adsorption of BC-FM was well fit by the pseudo-second-order adsorption and Langmuir models, and it was a spontaneous and endothermic process. Adsorption was mainly controlled via a chemical adsorption mechanism. Moreover, BC-FM could maintain a Cd removal rate of approximately 50% even when reused three times. Cd(II) capture by BC-FM was facilitated by coprecipitation, surface complexation, electrostatic attraction, and cation-π interaction. Additionally, the loaded Fe-Mn oxides also played an important role in the removal of Cd(II) by redox reaction and ion exchange in BC-FM. The results suggested that BC-FM could be used as an efficient adsorbent for treating Cd-contaminated wastewater.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

Preparation of magnesium Ferrite-Doped magnetic biochar using potassium ferrate and seawater mineral at low temperature for removal of cationic pollutants

Magnetic biochar has captured a great interest for remediation of environment as an easily separable carbonous adsorbent. Herein, a highly adsorptive magnetic biochar was manufactured through seawater mineral and K₂FeO₄ co-promoted pyrolysis of jackfruit peel at 300 °C for removal of different cationic pollutants, and characterized by element analysis, FTIR, SEM-EDS, XRD, XPS and so on. MgFe₂O₄ was generated without external base and a 19.42 emu/g saturation magnetization was achieved. Simultaneously, iron oxides and oxygen containing groups were introduced. The magnetic biochar exhibited 61.30 mg/g, 129.61 mg/g, and 1238.30 mg/g adsorption capacities for Cu²⁺, methylene blue (MB), and malachite green (MG) at 25 °C, respectively, and remarkably surpassed the corresponding pristine biochar. The adsorption of MB and MG was mainly realized by electrostatic interaction, hydrogen bonding, complexation, and π-π electron-donor-acceptor interaction, and that of Cu²⁺ was attributed to electrostatic interaction, hydrogen bonding, and complexation.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Remediation of Chromium (VI) from Groundwater by Metal-Based Biochar under Anaerobic Conditions

Iron salt-modified biochar has been widely used to remove Cr(VI) pollution due to the combination of the generated iron oxides and biochar, which can bring positive charge and rich redox activity. However, there are few comprehensive studies on the methods of modifying biochar with different iron salts. In this study, two iron salt (FeCl3 and Fe(NO3)3) modification methods were used to prepare two Fe-modified biochar materials for removing Cr(VI) in simulated groundwater environment. It was revealed by systematic characterization that FeCl3@BC prepared via the FeCl3 modification method, has larger pore size, higher zeta potential and iron oxide content, and has higher Cr(VI) adsorption-reduction performance efficiency as compared to Fe(NO3)3@BC prepared via Fe(NO3)3 modification method. Combined with XRD and XPS analyses, Fe3O4 is the key active component for the reduction of Cr(VI) to Cr(III). The experimental results have shown that acidic conditions promoted Cr(VI) removal, while competing ions (SO42− and PO43−) inhibited Cr(VI) removal by FeCl3@BC. The Elovich model and intra-particle diffusion model of FeCl3@BC can describe the adsorption behavior of Cr(VI) well, indicating that both the high activation energy adsorption process and intra-particle diffusion control the removal process of Cr(VI). The Freundlich model (R2 > 0.999) indicated that there were unevenly distributed chemisorptions centers on the FeCl3@BC surface. Stability experiments exposed that FeCl3@BC was stable under neutral, acidic, and alkaline conditions. Furthermore, the main mechanisms of FeCl3@BC removal of Cr(VI) include electrostatic adsorption, chemical reduction, ion exchange, and co-precipitation. In conclusion, our findings provide a new insight for the selection of iron salt-modified biochar methods, and will also be beneficial for the preparation of more efficient Fe-modified biochars in the future.

Evaluation of potassium ferrate activated biochar for the simultaneous adsorption of copper and sulfadiazine: Competitive versus synergistic

Combined pollution caused by organic pollutants and heavy metals pose a significant challenge to the adsorption process. In this study, iron-modified biochar (Fe-BC) was prepared by using ferrate (K₂FeO₄) and wheat stalk as the precursors for the adsorption of copper (Cu²⁺) and sulfadiazine (SDZ), especially under combined pollution scenarios. Iron modification not only enlarged the surface area but also loaded iron oxide nanoparticles on biochar surface. Accordingly, Fe-BC exhibited better adsorption capability of Cu²⁺ and SDZ than the pristine biochar (BC). The corresponding maximum adsorption capacities of Fe-BC₇₀₀ were 46.85 mg g^-1 and 45.43 mg g^-1 towards Cu²⁺ and SDZ, respectively. Interestingly, the adsorption was elevated in binary-pollutants system, suggesting a synergistic effect, which was probably attributed to the mutual bridging effects and complexation between Cu²⁺ and SDZ. The loaded iron oxide particles could serve as a physical barrier to separate the adsorptions of Cu²⁺ and SDZ and thus inhibited the competitive adsorption. Meanwhile, theoretical calculation demonstrated that sulfonamide group was the most probable binding site. Columns packed with Fe-BC₇₀₀ showed better performances for Cu²⁺ and SDZ removal in binary system (635.73 BV for Cu²⁺ and 4846.26 BV for SDZ) than in single systems (571.60 BV for Cu²⁺ and 3572.06 BV for SDZ), which was consistent with batch adsorption experiments. These results demonstrated the potential application of Fe-BC₇₀₀ for simultaneous adsorption of Cu²⁺ and SDZ and provided a cost-effective way for the remediation of organic and inorganic pollutants.

Bimetallic FeNi nanoparticles immobilized by biomass-derived hierarchically porous carbon for efficient removal of Cr(VI) from aqueous solution

Nano zero-valent iron (nZVI) is an effective material for Cr(VI) treatment, however excessive agglomeration and surface oxidation limit its application. Herein, straw derived hierarchically porous carbon supported FeNi bimetallic nanoparticles (FeNi@HPC) was prepared for effective removal of Cr(VI) from water. FeNi nanoparticles were successfully loaded onto HPC with good dispersibility, and HPC caused an increase in specific surface area of FeNi nanoparticles. FeNi@HPC exhibited a significantly enhanced removal efficiency for Cr(VI) in comparison to Fe@HPC and FeNi NPs. The Ni doping content was further optimized, and the best Ni content in bimetallic NPs was estimated as 10 wt%. The conditions optimal for the activity of FeNi@HPC were assessed, and the highest removal efficiency equivalent to 30 mg L^-1 of Cr(VI) was achieved at pH= 4.0 in 360 min with a dosage of 0.5 g L^-1. Higher temperatures favored the removal of Cr(VI) and FeNi@HPC manifested the lowest activation energy as compared to Fe@HPC and FeNi NPs. The action mechanisms of FeNi@HPC presumably involved electron transfer from Fe⁰, Fe²⁺and atomic hydrogen. This work not only provide a cost-effective and available HPC material to stabilize nZVI but also revealed that using FeNi@HPC is a promising approach for the remediation of water pollution.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Research progress and prospects for using biochar to mitigate greenhouse gas emissions during composting: A review

Biochar possesses a unique porous structure and abundant surface functional groups, which can potentially help mitigate greenhouse gas (GHG) emissions from compost. This review summarizes the properties and functions of biochar, and the effects of biochar on common GHGs (methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O)) and ammonia (NH₃, an indirect GHG) during composting. Studies have shown that it is possible to improve the mitigation of GHG emissions during composting by adjusting the biochar amount, type of raw material, pyrolysis temperature, and particle size. Biochar produced from crop residues and woody biomass has a greater effect on mitigating CH₄, N₂O, and NH₃ emissions during composting, and GHG emissions can be reduced significantly by adding about 10% (w/w) biochar. Biochar produced by high temperature pyrolysis (500-900 °C) has a greater effect on mitigating CH₄ and N₂O emissions, whereas biochar generated by low temperature pyrolysis (200-500 °C) is more effective at reducing NH₃ emissions. Interestingly, adding granular biochar is more beneficial for mitigating CH₄ emissions, whereas adding powdered biochar is better at reducing NH₃ emissions. According to the current research status, developing new methods for producing and using biochar (e.g., modified or combined with other additives) should be the focus of future research into mitigating GHG emissions during composting. The findings summarized in this review may provide a reference to allow the establishment of standards for using biochar to mitigate GHG emissions from compost.

Effective Cd2+ removal from water using novel micro-mesoporous activated carbons obtained from tobacco: CCD approach, optimization, kinetic, and isotherm studies

PURPOSE

This research aimed to develop activated carbons from tobacco by double (thermal-physical) and triple activations (thermal-chemical-physical) for high-efficiency removal of Cd²⁺.

METHODS

The adsorbents were characterized by their chemical composition, point of zero charge (pH_PZC), SEM, FT-IR, BET, and BJH. The subsequent adsorption studies were conducted: optimal conditions (CCD on adsorbent dose versus pH of Cd²⁺ solution), kinetics, equilibrium, thermodynamics, and desorption studies.

RESULTS

The activated carbons have irregular and heterogeneous morphology, surface functional groups COO-, C-O, C-O-C, C=O and O-H, pH_PZC of 11.11 and 10.86, and enhanced SSA (especially for CT NaOH + CO₂ = 103.40 g m^-2). The optimal conditions for Cd²⁺ adsorption occur using 4.0 g L^-1, pH from 3.0 to 7.0, with most of the Cd²⁺ adsorbed in the first 10-20 min. The goodness of the fit found for pseudo-first order, pseudo-second order, intraparticle diffusion, Langmuir, Freundlich, Dubinin-Radushkevich, Sips, and Temkin suggest the occurrence of Cd²⁺ chemisorption and physisorption in mono and multilayers. The values of ∆G° < 0 kJ mol^-1 indicate that the observed phenomena are energetically favorable and spontaneous; the values of ∆H° < 0 and the effective desorption rates (58.52% and 44.64%) suggest that the adsorption of Cd²⁺ is ruled mainly (but not only) by physical interactions.

CONCLUSION

Our excellent results on Cd²⁺ removal allow us to state that tobacco use as a raw material for adsorbent development is a renewable and eco-friendly technique, allowing the production of highly effective activated carbons and providing an adequate destination for this waste.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00740-8.

Magnetic porous biochar with high specific surface area derived from microwave-assisted hydrothermal and pyrolysis treatments of water hyacinth for Cr(Ⅵ) and tetracycline adsorption from water

Magnetic porous water hyacinth-derived biochar (MPBC_MW3) was synthesized via two-step Microwave (MW)-assisted processes. Characterization results not only testified high specific surface area (2097.50 m²/g) of the MPBC_MW3 assisted by MW-assisted pyrolysis, but also revealed its favorable magnetism derived from MW-assisted hydrothermal process. The MPBC_MW3 possessed pH-dependent monolayer adsorption capacities of 202.61 and 202.62 mg/g for Cr(VI) and TC with quick attainments of uptake equilibrium within 150 and 200 min. Moreover, the Cr(VI) and TC uptake were substantially steady under the interference from multifarious co-existing ions with slight decline after three adsorption-desorption cycles. Furthermore, the MPBC_MW3 was demonstrated to achieve excellent Cr(VI) binding primarily through complexation, electrostatic interaction, reduction and ion exchange, while presenting outstanding TC removal via pore filling, π-π stacking, hydrogen bonding force, electrostatic interaction and complexation. All these findings suggested the MPBC_MW3 synthesized by MW-assisted processes as an excellent adsorbent for purification of Cr(VI) and TC-contaminated water.

Application of co-pyrolysis biochar for the adsorption and immobilization of heavy metals in contaminated environmental substrates

Heavy metal pollution has been considered as a serious threat to the environment and human in the past decades due to its toxic and unbiodegradable properties. Recently, extensive studies have been carried out on the removal of heavy metals, and various adsorption materials have been successfully developed. Among, biochar is a promising option because of its advantages of various biomass sources, abundant microporous channels and surface functional groups, as well as its attractive economic feasibility. However, the application of pristine biochar is limited by its low adsorption capacity and nonregenerative property. Co-pyrolysis biochar, produced from the pyrolysis of biomass with the addition of another biomass or non-biomass precursor, is potential in overcoming the limitation of pristine biochar and achieving superior performance for heavy metal adsorption and immobilization. Therefore, this article summarizes the recent advances in development and applications of co-pyrolysis biochar for adsorption and immobilization of various heavy metals in contaminated environmental substrates. In details, the production, characteristics and advantages of co-pyrolysis biochar are initially presented. Subsequently, the adsorption behaviors and mechanisms of different heavy metals (including Hg, Zn, Pb, Cu, Cd, Cr, As, etc.) in flue gas and wastewater by co-pyrolysis biochar are reviewed, as well as factors influencing their adsorption capacities. Meanwhile, the immobilization of heavy metals in both biochar itself and contaminated soils by co-pyrolysis biochar is discussed. Finally, the limitations of current studies and future prospects are proposed. It aims at providing a guideline for the exploitation and application of cost-effective and environmental-friendly co-pyrolysis biochar in the decontamination of environmental substrates.

Magnetic biochar prepared by electromagnetic induction pyrolysis of cellulose: Biochar characterization, mechanism of magnetization and adsorption removal of chromium (VI) from aqueous solution

This work introduces a novel methodology for synthesis of magnetic biochar from cellulose using an electromagnetic induction technology. More rough surfaces, sharp corners and edges, and compact regular pore structure with Fe₃O₄ and Fe₂O₃ of magnetic biochar was obtained. Such magnetic biochar possessed higher specific surface area (~236 m²/g) and micropore volume (0.144 m³/g). More hydroxyl groups of magnetic biochars decomposed and reacted with iron ions to form new chemical bonds. The coercivity and remanence of two magnetic biochars were calculated to be 125.76 Oe and 1.26 emu/g, 71.48 Oe and 1.31 emu/g. The total iron leaching rate were 0.94% and 1.28%, indicating magnetic biochar form wet pyrolysis process showed strong magnetization and iron loading stability (98.59%). Alternating electromagnetic field influenced the iron loading capacity and stability by Lorentz force during wet pyrolysis process. Such magnetic biochar can be used for removal of Cr(VI) from wastewater.

Simultaneous adsorption of Cr(VI) and phenol by biochar-based iron oxide composites in water: Performance, kinetics and mechanism

The pollution of heavy metals and organic compounds has received increased attention in recent years. In the current study, a novel biochar-based iron oxide composite (FeYBC) was successfully synthesized using pomelo peel and ferric chloride solution through one-step process at moderate temperature. Results clearly demonstrate that FeYBC exhibited more efficient removal of Cr(VI) and/or phenol compared with the pristine biochar, and the maximum adsorption amounts of Cr(VI) and phenol by FeYBC could reach 24.37 and 39.32 mg g^-1, respectively. A series of characterization data suggests that several iron oxides such as Fe₂O₃, Fe⁰, FeOOH and Fe₃O₄ were formed on the FeYBC surface as well as oxygen-containing groups. Thermodynamics study indicates that Cr(VI) and phenol adsorption by FeYBC were endothermic and exothermic processes, respectively. Langmuir adsorption isotherm and pseudo-second order models could better explain the Cr(VI) and phenol adsorption behaviors over FeYBC. The Cr(VI) adsorption might be primarily achieved through the ion exchange and surface complexation and reduction, whereas the π-π interaction and electron donor-acceptor complex mainly contributed to phenol adsorption. The findings indicate that the biochar-based iron oxide composites material was an efficient adsorbent for the remediation of industrial effluents containing Cr(VI) and phenol.

Straw biochar enhanced removal of heavy metal by ferrate

This study demonstrated that As(III) was appreciably removed by ferrate in the presence of straw biochar. Removal efficiency of As in ferrate/biochar system was over 91%, increased by 34% compared with ferrate alone ([biochar]₀ = 10 mg/L, [ferrate]₀ = 6 mg/L, [As(III)]₀ = 200 μg/L). In the reaction process, As(III) was oxidized to As(V) mainly by ferrate, while ferrate was reduced into ferric (hydr)oxides and coated on the biochar. Biochar was oxidized in the reaction and its surface area, pore volume and the amount of Lewis acid functional groups were substantially improved, which provided interaction sites for As adsorption. Analysis of hydrodynamic diameter and zeta potential revealed that biochar interacted with the ferrate resulted ferric oxides and enlarged the Fe-C-As particle/floc, which promoted their settlement and thus the liquid-solid separation of As. As(V) was adsorbed on the surface of biochar and ferric (hydr)oxides through hydrogen bond, electrostatic attraction and As-(OFe) bond. Ferrate/biochar was not only effective for As removal, but removed 73.31% of As, 50.38% of Cd, and 75.27% of Tl when these hazardous species synchronously existed in polluted water (initial content: As, 100 μg/L; Cd, 50 μg/L; Tl, 1 μg/L). The combination of ferrate with biochar has potential for the remediation of hazardous species polluted water.

A novel preparation of S-nZVI and its high efficient removal of Cr(VI) in aqueous solution

The chitosan-stabilized biochar supported S-nZVI (CS@BC/S-nZVI) composite with low aggregation and superior antioxidation were successfully synthesized by liquid-phase reduction method for the outstanding removal of Cr(VI) from wastewater and characterized by SEM, BET, FTIR, XRD, and XPS. The optimized synthesis parameters of CS@BC/S-nZVI were determined as a 0.14 molar ratio of S/Fe and a 0.25 mass ratio of BC/Fe. The CS@BC/S-nZVI possessed a specific surface area of 199.246 m²/g and an average pore size and pore volume of 1.186 nm and 0.272 cc/g. The CS@BC/S-nZVI could remain reductive activity after Cr(VI) removal and present a remarkable tolerance to the coexisting ions during Cr(VI) removal. The adsorption data were fitted well by the pseudo-second order model and the Langmuir model. The removal of Cr(VI) by CS@BC/S-nZVI was an exothermic process with prominent Cr(VI) removal capacities of 244.07 mg/g at 120 min and 221.84 mg/g at 15 min at 25 ℃. Further mechanism analysis proved that the binding of Cr(VI) to CS@BC/S-nZVI was mainly a synergistic effect of reduction and electrostatic attraction. Overall, these findings shed new light on the research of a novel S-nZVI compound and revealed the potential practical application of CS@BC/S-nZVI in the future heavy metal removal from wastewater.