Simultaneous recovery of phosphorus and alginate-like exopolysaccharides from two types of aerobic granular sludge

Unraveling stress responses of microalgal-bacterial granular sludge when treating ciprofloxacin-laden wastewater

Unraveling the potential of microalgal-bacterial granular sludge (MBGS) technology for sustainable treatment of ciprofloxacin (CIP)-laden wastewater and mitigation of antibiotic resistance genes (ARGs) remains limited. This study evaluated the performance of bacterial granular sludge (BGS) and MBGS systems in terms of nutrient and CIP removal, granular stability, and ARG attenuation under long-term exposure to CIP for the first time. While both systems achieved effective pollutant removal at low CIP concentrations (0.1 and 0.5 mg/L), MBGS demonstrated superior resilience and efficiency under high CIP loads (10 mg/L). Notably, MBGS improved phosphorus removal by 32.71 %, achieved a 70.42 μg/(g-SS)/d greater CIP removal and maintained structural integrity, unlike BGS, which disintegrated under oxidative stress. The microalgae species (Pseudoneochloris and Chlamydopodium) could effectively resist various concentrations of CIP. Additionally, the relative abundance of ARGs in MBGS was 30.91 % lower than that in BGS, suggesting that microalgae in MBGS system could reduce ARG production. Overall, these findings improve our understanding of the role of microalgae in enhancing CIP remediation and controlling ARG propagation in MBGS systems.

Algal-bacterial granules for circular bioeconomy: Formation mechanisms and biotechnological applications

Cyanobacteria and microalgae are sustainable and renewable biocatalysts for solar energy harvesting, recovering nutrients from wastewater, reducing greenhouse gas emissions from wastewater treatment plants (WWTPs) and enable creation of a sustainable circular bioeconomy. Pure and axenic cultures of photosynthetic microorganisms have been widely studied for synthesizing bio-based products through improving the metabolic pathways via genetic engineering. However, pure cultures suffer from contamination and separation challenges when considered for environmental applications. Mixed microbial communities comprising of photosynthetic organisms and bacteria in the form of either flocs or granules have recently received a lot of attention due to their potential contribution to wastewater treatment, environmental sustainability and circular bioeconomy. The advantages of algal-bacterial granules (ABG) in WWTPs include effective elimination of contaminants and nutrients, reduction in aeration requirement, and production of biomass feedstock for downstream processing. Although ABG are an attractive option for energy positive wastewater treatment, it is not yet matured as technological option for deployment in full-scale WWTPs. Moreover, several aspects of ABG including synergistic metabolism, granulation mechanisms, granular stability, bioreactor operating conditions, cell-cell interactions, extracellular polymeric substances and bio-based products deserve more intense research. This article provides a detailed overview of algal-bacterial communities, their occurrence in natural environments, ABG cultivation in engineered settings, potential biotechnological applications and the recent progress made towards sustainable biological wastewater treatment and circular bioeconomy.

From waste to wealth: Exploring the effect of particle size on biopolymer harvesting from aerobic granular sludge

This study aimed to examine the impact of aerobic granular sludge (AGS) sizes on its properties and alginate-like exopolymers (ALE) recovery potential. The AGS was cultivated in a lab-scale bioreactor and categorized into six size classes with 200 μm intervals. There appeared a critical size (400-800 μm) for developing stable AGS structure and excellent ALE recovery. A higher hydrophobicity (74.36 %) and density (1,037 g/L) was observed in AGS400-600μm than other sizes. Moreover, the highest ALE yield was obtained in ALE600-800μm (388 mg/g VSS) for its higher abundance of EPS-producers (35.1 %), while the PN content of ALE400-600μm was higher than other samples. Meanwhile, the concentrations of metal elements within the ALE and AGS identified that there was no bio-accumulation of metal elements in the ALE. This study offers an in-depth understanding of biopolymer recovery from AGS, paving the way for a novel resource recovery strategy through the regulation of AGS sizes.

Development and challenges of emerging biological technologies for algal-bacterial symbiosis systems: A review

The algal-bacterial symbiosis system (ABSS) is considered as a sustainable wastewater treatment process. This review provides a comprehensive overview of the mechanisms of ABSS for the removal of common pollutant, heavy metals, and especially for emerging pollutants. For the macroscopical level, this review not only describes in detail the reactor types, influencing factors, and the development of the algal-bacterial process, but also innovatively proposes an emerging process that combines an ABSS with other processes, which enhances the efficiency of removing difficult-to-biodegrade pollutants. Further for the microscopic level, interactions between algae and bacteria, including nutrient exchange, signaling transmission and gene transfer, have been deeply discussed the symbiotic relationship with nutrient removal and biomass production. Finally, recommendations are given for the future development of the ABSS. This review comprehensively examines ABSS principles, development, algal-bacterial interactions, and application in wastewater treatment, aiming to deepen theoretical and practical understanding and advance ABSS technology.

Alginate-like exopolysaccharides extracted from different waste sludges exhibit varying physicochemical and material properties

This study examined the influence of different wastewater treatment processes on the physicochemical properties of Alginate-Like Exopolymers (ALE) extracted from waste sludge. Sludge samples were collected from wastewater treatment plants (WWTPs) processing both combined industrial and domestic wastewater, as well as domestic wastewater alone. Among the processes studied, aerobic granular sludge (AGS) produced the highest ALE yield (352 ± 50 mg/g-VSsludge), significantly exceeding that from membrane bioreactor (170 ± 41 mg/g-VSsludge) and conventional activated sludge (<130 mg/g-VSsludge). AGS-derived ALE also had the highest uronic acid content (224 ± 14.5 mg/g-VSsludge), with mannuronic acids playing a critical role in enhancing hydrogel cohesion and stability. The results showed that the distinct microbial consortium in the AGS system, including the presence of Pseudomonas alcaligenes, was strongly associated with increased ALE production. This establishes a novel link between microbial community composition and ALE yield. These insights are crucial for optimizing resource recovery in AGS systems and underscore the potential of ALE for various industrial applications.

Potential for curdlan recovery from aerobic granular sludge wastewater treatment systems - A review

The aerobic granular sludge (AGS) biotechnology has been explored for wastewater treatment for over two decades. AGS is gaining increased interest due to its enhanced treatment performance ability and the potential for resource recovery from AGS-based wastewater treatment systems. Resource recovery from AGS is a promising approach to sustainable wastewater treatment and attaining a circular economy in the wastewater management industry. Currently, research is at an advanced stage on recovering value-added resources such as phosphorus, polyhydroxyalkanoates, alginate-like exopolysaccharides, and tryptophan from waste aerobic granules. Recently, other value-added resources, including curdlan, have been identified in the aerobic granule matrix, and this may increase the sustainability of biotechnology in the wastewater industry. This paper provides an overview of AGS resource recovery potential. In particular, the potential for enhanced curdlan biosynthesis in the granule matrix and its recovery from AGS wastewater treatment systems is outlined.

The feasibility and applicability of sequential extraction of high value-added biogenic materials from sewage sludge

The sequential extraction routes of biogenic materials from sewage sludge (SS) were investigated. Physical methods (ultrasound, heating) and chemical methods (sodium hydroxide, sodium carbonate) were used to extract extracellular polymeric substances (EPS) and alginate-like extracellular polymers (ALEs) from SS. The residues after extraction were further subjected to physical methods (heating) and chemical methods (sulfuric acid, sodium hydroxide) for protein extraction. A comparison was made between sequential extraction routes and direct extraction of biomaterials from sludge in terms of extraction quantity, material properties, and applicability. The results showed that sequential extraction of biomaterials is feasible. The highest extraction quantities were obtained when using sodium carbonate for EPS and ALE extraction and sodium hydroxide for protein, reaching 449.80 mg/gVSS, 109.78 mg/gVSS, and 5447.08 mg/L, respectively. Sequential extraction procedures facilitate the extraction of biomaterials. Finally, suitable extraction methods for different application scenarios were analyzed.

Bibliometric insights into microalgae cultivation in wastewater: Trends and future prospects for biolipid production and environmental sustainability

Cultivation of microalgae in wastewater stream has been extensively reported, especially for simultaneous production of biolipid and wastewater treatment process. This study aimed to derive the research trend and focus on biolipid production from microalgae cultivated in wastewater by using bibliometric approach. The search strategy used in Scopus database resulted in 1339 research articles from 1990 to November 2023. Majority of publications (46%) were affiliated to China and India, showing their predominance in this field. Keywords related to the center of attention included biodiesel, biofuel, biomass and nutrient removal. Meanwhile, keyword with recent publication year, indicating the emerging research trends, revolved around the cultivation techniques and application of the system. Co-culture involving more than one microalgae species, bacteria and yeast showed promising results, while addition of nanoparticles was also found to be beneficial. Increasing exploration on the application of microalgae for treatment of saline wastewater was also reported and the carbon fixation mechanism by microalgae has been widely investigated to promote less environmental impact. Future research on these topics were suggested based on the findings of the bibliometric analyses.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Granule formation mechanism, key influencing factors, and resource recycling in aerobic granular sludge (AGS) wastewater treatment: A review

The high-efficiency and additionally economic benefits generated from aerobic granular sludge (AGS) wastewater treatment have led to its increasing popularity among academics and industrial players. The AGS process can recycle high value-added biomaterials including extracellular polymeric substances (EPS), sodium alginate-like external polymer (ALE), polyhydroxyfatty acid (PHA), and phosphorus (P), etc., which can serve various fields including agriculture, construction, and chemical while removing pollutants from wastewaters. The effects of various key operation parameters on formation and structural stability of AGS are comprehensively summarized. The degradable metabolism of typical pollutants and corresponding microbial diversity and succession in the AGS wastewater treatment system are also discussed, especially with a focus on emerging contaminants removal. In addition, recent attempts for potentially effective production of high value-added biomaterials from AGS are proposed, particularly concerning improving the yield, quality, and application of these biomaterials. This review aims to provide a reference for in-depth research on the AGS process, suggesting a new alternative for wastewater treatment recycling.

The role of light wavelengths in regulating algal-bacterial granules formation, protein and lipid accumulation, and microbial functions

High value-added products recovery from algal-bacterial granular sludge (ABGS) has received great attention recently. This study aimed to explore the role of different light wavelengths in regulating granule formation, protein and lipid production, and microbial functions. Bacterial granular sludge (BGS, R0) was most conducive to forming ABGS under blue (R2) light with the highest chlorophyll a (10.2 mg/g-VSS) and diameter (1800 μm), followed by red (R1) and white (R3) lights. R0-R3 acquired high protein contents (>164.8 mg/g-VSS) with essential amino acids above 44.4%, all of which were suitable for recycling, but R2 was the best. Also, blue light significantly increased total lipid production, while red light promoted the accumulation of some unsaturated fatty acids (C18:2 and C18:3). Some unique algae and dominant bacteria (e.g., Stigeoclonium, Chlamydomonas, and Flavobacteria) enrichment and some key functions (e.g., amino acid, fatty acid, and lipid biosynthesis) up-regulation in R2 might help to improve proteins and lipids quality. Combined, this study provides valuable guidance for protein and lipid recovery from ABGS.

Potential interactive effect on biomass and bio-polymeric substances of microalgal-bacterial aerobic granular sludge as a valuable resource for sustainable development

The algal/bacterial biomass and extracellular polymeric substances (EPSs) existing in microalgal-bacterial aerobic granular sludge (MB-AGS) offer a promising bioresource. The current review-based paper presents a systematic overview of the compositions and interactions (gene transfer, signal transduction, and nutrient exchange) of microalgal and bacteria consortia, the role of cooperative or competitive partnerships of MB-AGS in the treatment of wastewater and recovery of resource, and the environmental/operational factors affecting their interactions and EPS production. Moreover, a brief notes is given on the opportunities and major challenges of utilizing the microalgal-bacterial biomass and EPS for phosphorus and polysaccharides chemical recovery, renewable energy (i.e. biodiesel, hydrogen, electricity) production. Overall, this compact review will pave the way for developing MB-AGS future biotechnology.

Energy and material refineries of future: Wastewater treatment plants

There have been many important milestones on humanity's long journey towards achieving environmental sanitation. In particular, the development of the activated sludge system can be claimed to be one of the most groundbreaking advances in the protection of both public health and the wider ecosystem. The first wastewater treatment plants (WWTPs) were developed over a century ago and were soon configured for use with activated sludge. However, despite their long history and service, conventional activated sludge (CAS) plants have become an unsustainable method of wastewater treatment. In addition, conventional WWTPs are intensive energy-consumers and at best allow only very limited material recovery. A paradigm shift to convert existing WWTPs into more sustainable facilities must therefore be considered necessary and to this end the wastewater biorefinery (WWBR) concept may be considered a solution that maximizes both energy and material recovery, in line with the circular economy approach.

A review on recovery of extracellular biopolymers from flocculent and granular activated sludges: Cognition, key influencing factors, applications, and challenges

A reasonable recovery of excess sludge may shift the waste into wealth. Recently an increasing attention has been paid to the recycling of extracellular biopolymers from conventional and advanced biological wastewater treatment systems such as flocculent activated sludge (AS), bacterial aerobic granular sludge (AGS), and algal-bacterial AGS processes. This review provides the first overview of current research developments and future directions in the recovery and utilization of high value-added biopolymers from the three types of sludge. It details the discussion on the recent evolvement of cognition or updated knowledge on functional extracellular biopolymers, as well as a comprehensive summary of the operating conditions and wastewater parameters influencing the yield, quality, and functionality of alginate-like exopolymer (ALE). In addition, recent attempts for potential practical applications of extracellular biopolymers are discussed, suggesting research priorities for overcoming identification challenges and future prospects.

Biofilm with highly heterogeneous interior structure for pollutant removal: Effects of individual extracellular polymeric substance

For the first time, this study reveals the effects of an individual component of extracellular polymeric substances on the substrate consumption rates by the embedded cells based on the highly heterogeneous interior structures of a working biofilm. The flow-across mode in operation established a boundary-layer flow field with high transport resistance, making the uniformly structured model valid. Conversely, the flow field of the flow-through mode is determined by 46% jointly by proteins and β-d-glucopyranose polysaccharides. The substrate consumption rates hindered by β-d-glucopyranose polysaccharide is up to 60% over the 20%-40% biofilm height from the bottom, much lower than expected by the uniformly structured models. The strategies to maximize the biofilm performance have been suggested.

A comparative study on simultaneous recovery of phosphorus and alginate-like exopolymers from bacterial and algal-bacterial aerobic granular sludges: Effects of organic loading rate

The effects of organic loading rate (OLR) on simultaneous phosphorus (P) and alginate-like exopolymers (ALE) recovery from bacterial aerobic granular sludge (AGS) and algal-bacterial AGS were examined and compared during 70 days' operation. With the increase of OLR (0.6-1.2 g COD/(L·day)), both AGS showed good settleability and granular strength with P bioavailability > 92% (Stage III). The moderate increase in OLR had a positive influence on simultaneous recovery of P and ALE. On day 60, the contents of ALE and guluronic acid/guluronic acid (GG) blocks reached the highest in algal-bacterial AGS, about 13.37 and 2.13 mg/g-volatile suspended solids (VSS), respectively. Meanwhile, about daily 0.55 kg of P is estimated to be recovered from the wastewater treatment plant with a treatment capacity of 10,000 m³/day. P mass balance analysis during ALE extraction from both AGS was conducive to further evaluation of P removal pathway and its application potentials.

Cyanophycin Granule Polypeptide: a Neglected High Value-Added Biopolymer, Synthesized in Activated Sludge on a Large Scale

Recovery of microbial synthetic polymers with high economic value and market demand in activated sludge has attracted extensive attention. This work analyzed the synthesis of cyanophycin granule peptide (CGP) in activated sludge and its adsorption capacity for heavy metals and dyes. The distribution and expression of synthetic genes for eight biopolymers in two wastewater treatment plants (WWTPs) were analyzed by metagenomics and metatranscriptomics. The results indicate that the abundance and expression level of CGP synthase (cphA) are similar to those of polyhydroxyalkanoate polymerase, implying high synthesis of CGP in activated sludges. CGP in activated sludge is mainly polymerized from aspartic acid and arginine, and its secondary structure is mainly β-sheet. The crude yields of CGP are as high as 104 ± 26 and 76 ± 13 mg/g dry sludge in winter and in summer, respectively, comparable to those of polyhydroxyalkanoate and alginate. CGP has a stronger adsorption capacity for anionic pollutants (Cr (VI) and methyl orange) than for cationic pollutants because it is rich in guanidine groups. This study highlights prospects for recovery and application of CGP from WWTPs. IMPORTANCE The conversion of organic pollutants into bioresources by activated sludge can reduce the carbon dioxide emission of wastewater treatment plants. Identification of new high value-added biopolymers produced by activated sludge is beneficial to recover bioresources. Cyanophycin granule polypeptide (CGP), first discovered in cyanobacteria, has unique chemical and material properties suitable for industrial food, medicine, cosmetics, water treatment, and agriculture applications. Here, we revealed for the first time that activated sludge has a remarkable ability to produce CGP. These findings could further facilitate the conversion of wastewater treatment plants into resource recycling plants.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.