Efficient adsorption of dyes from aqueous solution using a novel functionalized magnetic biochar: Synthesis, kinetics, isotherms, adsorption mechanism, and reusability

Co-conversion of CO2 and refractory organics into bioplastics through a stable biocarrier

An attractive solution to traditional plastics is scaling up the microbial system to produce bioplastics like polyhydroxyalkanoates (PHAs). Herein, we developed a dynamic microbial ecosystem on porous biocarrier for conversion of refractory organics to bioplastics. biocarriers of 25 mm sized were packed in a 5 L bioreactor and operated for 200 days, to achieve stable performance for commercial applications. Reaching to bioreactor stability, microbial ecosystem utilized quinoline (5.2 kg/m3/day) for carbon & nitrogen metabolism, phenol (4.5 kg/m3/day) to trigger synthesis of PHAs, pyridines (4.2 kg/m3/day) to manufacture hydroxy fatty acid polyesters, NH4+(7.2 kg/m3/day) to regulate symbiosis, NO3/NO2 (1.2 kg/m3/day) to serve as mediators and electron acceptors. On 200th day, bioplastic production reached to 76.8 (kg/m3/day) with stable pollutants degradation of 70.3 (kg/m3/day). Purity of the bioplastics remained quite high (average 90 %) after 100 days of bioreactor operation. Interestingly, PHAs synthesis was triggered (31-581 g/day) with increased CO2 fixation from 45 to 594 (mol/h/g protein), due to the growth of CO2 assimilators. The developed biocarriers could be directly poured into the secondary tank of the existing wastewater treatment plants (WWTPs), which will not only produce bioplastics but also boost treatment efficiency and resource recovery potential of WWTPs.

Impact of External Conditions on the Desorption and Degradation Capacity of Biochar for Rhodamine B

Biochar has attracted considerable interest owing to its high adsorption capacity; however, the mechanisms through which environmental factors influence the release of adsorbed pollutants remain unclear. This study investigates the adsorption and desorption dynamics of Rhodamine B (RhB) on biochars B2 and B6, which were pyrolyzed at temperatures of 200 °C and 600 °C, respectively, under varying conditions. The results indicated that there was no significant difference in removal efficiency at low RhB concentrations; however, at a concentration of 600 mg/L, biochar B2 had a higher removal efficiency than B6, likely attributable to more adsorption sites. Increased temperatures were found to enhance desorption from both B2 and B6, with B6 exhibiting a faster desorption rate. This phenomenon may be due to the stronger hydrogen bonding between B2 and RhB, which could inhibit desorption. In addition, elevated pH values facilitated desorption, presumably through electrostatic repulsion. Under alkaline conditions, B2 released a greater amount of dissolved organic matter (DOM), leading to increased RhB desorption relative to B6. This study offers a valuable reference for evaluating the environmental risk associated with the application of biochar in real-world settings.

Efficient removal of Lambda-cyhalothrin from simulated water using Co-composted-biochar: A modern day substituent of conventional bioadsorbent

Lambda-cyhalothrin, a type II pyrethroid, is widely employed as an outdoor and indoor insect repellent due to its target specificity and moderate toxicity. However, its extensive use elevated its residual concentration to significant detectable levels in waterbodies, making it an immediate problem. Furthermore, as a lipophile, its accumulation in multicellular organisms has resulted in irreversible acute and chronic effects on numerous physiochemical and biological activities. Thus, to address its removal as a pollutant from waterbodies, bio-adsorbents are considered a cost-effective and environmentally sound cleanup method. Modern day bio-adsorbents like co-composted-biochar, because of their potential adsorption capability rather than the conventional ones, may become a commonly used remediation tool. Therefore, this study aims at producing co-composted-biochar (COMBI) by combining kitchen-derived putrescible waste and biochar to effectively remove Lambda-cyhalothrin (LC) from spiked up water. It has been further analysed for its physico-chemical characteristics using instrumentation such as BET, SEM-EDS and FTIR. The results showed that biochar and COMBI had a much greater surface area (2.174 m2/g-1.718 m2/g) and pore diameters (3.648 nm-3.628 nm) than the compost sample. Simultaneously, the response surface methodology (RSM) was employed to optimise the removal efficiency of COMBI against LC. A Box-Behnken Design (BBD) was developed with an experimental layout to perform tests for determining the effects of four basic parameters i.e. pH, contact time (minute), adsorbate concentration (g/l) and adsorbent dose (g) on (%) removal of LC. It was noted that variation among removal efficiencies for the experimental runs ranges between 94.8% and 99.9%, within the majority attaining an efficiency of greater than 95%. During the experiments, the ideal conditions were found to be as pH 2 in a contact time of 140 min and a dose of adsorbent 0.01 g. Thus, COMBI could be a promising and potential candidate for the elimination of LC.

Modification of Fe3O4 magnetic nanoparticles for antibiotic detection

The manufacture, modification, and application of surface-functionalized Fe3O4 nanoparticles in the extraction and isolation of antibiotics are reviewed in this paper. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) can be used to characterize the morphological features of Fe3O4 nanoparticles, while Fourier Transform Infrared Spectrometer (FTIR) and X-ray diffractometry (XRD) can be used to determine the crystalline shapes and distinctive functional groups of these particles. We gathered a lot of data to investigate the effects of experimental parameters like pH, adsorbent dosage, contact time, and ionic strength on the extraction of antibiotics from Fe3O4 magnetic nanoparticles. We additionally talked about the mechanism of action of magnetic nanoparticles for the extraction of separated antibiotics and how they are utilized in practical detection methods. This work concluded with an overview of the potential for environmental friendliness and dispersion of functionalized Fe3O4 nanoparticles, as well as potential challenges and directions.

Recent advances and factors affecting the adsorption of nano/microplastics by magnetic biochar

The increase in nano/microplastics (NPs/MPs) from various everyday products entering aquatic environments highlights the urgent need to develop mitigation strategies. Biochar (BC), known for its excellent adsorption capabilities, can effectively target various harmful organic and inorganic pollutants. However, traditional methods involving powdered BC necessitate centrifugation and filtration, which can lead to the desorption of pollutants and subsequent secondary pollution. Magnetic biochar (MBC) offers a solution that facilitates straightforward and rapid separation from water through magnetic techniques. This review provides the latest insights into the progress made in MBC applications for the adsorption of NPs/MPs. This review further discusses how external factors such as pH, ionic strength, temperature, competing ions, dissolved organic matter, aging time, and particle size impact the MBC adsorption efficiency of MPs. The use of machine learning (ML) for optimizing the design and properties of BC materials is also briefly addressed. Finally, this review addresses existing challenges and future research directions aimed at improving the large-scale application of MBC for NPs/MPs removal.

Enhanced adsorption of tetracycline by lanthanum/iron co-modified rice shell biochar: Synthesis, adsorption performance, site energy distribution and regeneration

A novel La/Fe co-modified biochar derived from rice shell (La/Fe@RSBC) was prepared and employed in tetracycline (TC) adsorption from water. The characterizations, kinetics, isotherms, thermodynamics, and site energy distribution (SED) were studied to investigate TC adsorption behaviors. La/Fe@RSBC exhibited the maximum adsorption capacity towards TC of 414.84 mg/g, which was 1.27-2.41 folds than that of RSBC, La@RSBC, and Fe@RSBC. The possible adsorption mechanism of TC dominantly involved H bond, surface complexation, pore filling, electrostatic attraction, and π-π electron donor-acceptor (EDA) interaction. Moreover, TC adsorption behavior was spontaneous and endothermic, significantly related to the compositions and dosage of La/Fe@RSBC, initial pH, and solution temperature. Additionally, SED results promulgated that co-loaded Fe and La synergistically enhanced the affinity of biochar and provided more adsorption sites for TC at a higher temperature. The residual TC after regeneration by ethanol dominantly inhibited the third stage of adsorption, that is, the adsorption of TC on the inner surface of La/Fe@RSBC in next run. Importantly, H2O2 combined with La/Fe@RSBC-mediated advanced oxidation process could effectively clear residual TC after ethanol desorption, which obviously improved the service life of La/Fe@RSBC. In addition, the swine wastewater treatment demonstrated that La/Fe@RSBC had a promising potential application in practical application.

Magnetic nanoparticle modified moss Biochar: A novel solution for effective removal of enrofloxacin from aquaculture water

The presence of residual antibiotics in water constitutes a potential threat to aquatic environments. Therefore, designing environmentally friendly and efficient biochar adsorbents is crucial. Aquaculture by-product moss (bryophyte) was transformed into biochar, which can eliminate antibiotics from wastewater through adsorption. This study successfully fabricated moss biochar (BC) and magnetically modified moss biochar (MBC), and explored their adsorption performance for enrofloxacin (ENR). Characterization analyses revealed that the specific surface area, total pore volume, and the quantity of functional groups of the MBC were significantly larger than those of the BC. The Langmuir isotherm model suggests that the maximum adsorption capacities of BC and MBC for ENR are 7.24 mg g⁻1 and 11.62 mg g⁻1. The adsorption process conforms to a pseudo-second-order kinetic model. Studies carried out at different temperatures disclose the spontaneous and endothermic thermodynamic characteristics of the system. Under neutral conditions, the adsorption efficiency attains its peak. The existence of various coexisting ions in water exerts a negligible influence on the adsorption process; furthermore, when the concentration of humic acid (HA) ranges from 0 to 20 mg/L, the removal rate remains above 90%. In actual water samples, the antibiotic removal rate can be as high as 96.84%. After three cycles of reuse, the structure of MBC remains unchanged while maintaining a high removal efficiency. The primary mechanisms for antibiotic adsorption by MBC involve electrostatic interactions, hydrophobic interactions, pore-filling effects, hydrogen bonding, and π-π interactions. This reusable magnetic moss biochar provides a promising research direction for effectively eliminating antibiotics from water sources.

Competitive adsorption of polycyclic aromatic hydrocarbons on phosphorus tailing-modified sludge biochar provides mechanistic insights

Biochar has been widely used to solve the wastewater pollution of polycyclic aromatic hydrocarbons (PAHs). However, the competition of PAHs with different benzene ring numbers (e.g., phenanthrene [Phe], pyrene [Pyr], and benzo[a]pyrene [BaP]) for adsorption sites on biochar has received little attention. In this study, biochar was produced by co-pyrolysis of sludge and phosphorus tailing at different temperatures (300, 500, or 800 °C) to adsorb PAHs. The results show that phosphorus tailing increased the adsorption of PAH by increasing the biochar's BET surface area (SBET), micropore volume, hydrophobicity (at low temperatures) and aromaticity (at high temperatures). The maximum adsorption capacities were 29.90 µmol/g for Phe, 25.58 µmol/g for Pyr and 20.45 µmol/g for BaP, respectively. Importantly, the types and functions of groups involved in the adsorption of various PAHs were discussed. Adsorption of Phe and Pyr on the biochar mainly involved C=O and C-O-C functional groups, and there was a certain degree of competition between these PAHs for those sites. In contrast, BaP mainly adsorbed at C-OH and C=C moieties, without competing with Phe or Pyr at C-OH sites. The competitive edge of BaP was also stronger than that of Phe and Pyr on C=C functional groups. The adsorption mechanisms involving pore filling, hydrophobic interactions, and π-π interactions governed the adsorption of the evaluated PAHs. Overall, the adsorption of PAHs on biochar followed a heterogeneous chemical adsorption process.

Efficient removal of high concentration dyes from water by functionalized in-situ N-doped porous biochar derived from waste antibiotic fermentation residue

Using biochar for dye wastewater treatment is attracting interest due to its excellent adsorption properties and low costs. In this work, a novel biochar derived from oxytetracycline fermentation residue (functionalized OFR biochar, FOBC) was investigated as a efficient adsorbent for typical dyes removal. At 25 °C, the maximum adsorption capacity calculated by Langmuir model of FOBC-3-600 for methylene blue (MB), malachite green (MG), and methyl orange (MO) reached 643.97, 617.89, and 521.03 mg/g, respectively. The kinetics and isotherm model fitting showed that the chemisorption and physisorption both occurred during the adsorption process. Dyes were efficiently adsorbed through pore filling, electrostatic attraction, π-π interactions, and surface complexation. And the cycling experiment and environmental risk assessment indicated that the FOBC-3-600 had excellent recyclability and utilization safety. Overall, this study provides a practical method to simultaneously treat the dyeing wastewater and utilize the antibiotic fermentation residue.

Machine learning screening of biomass precursors to prepare biomass carbon for organic wastewater purification: A review

In the past decades, the amount of biomass waste has continuously increased in human living environments, and it has attracted more and more attention. Biomass is regarded as the most high-quality and cost-effective precursor material for the preparation carbon of adsorbents and catalysts. The application of biomass carbon has extensively explored. The efficient application of biomass carbon in organic wastewater purification were reviewed. With briefly introducing biomass types, the latest progress of Machine learning in guiding the preparation and application of biomass carbon was emphasized. The key factors in constructing efficient biomass carbon for adsorption and catalytic applications were discussed. Based on the functional groups, rich pore structure and active site of biomass carbon, it exhibits high efficiency in water purification performance in the fields of adsorption and catalysis. In addition, out of a firm belief in the enormous potential of biomass carbon, the remaining challenges and future research directions were discussed.

Enhanced adsorption of dye wastewater by low-temperature combined NaOH/urea pretreated hydrochar: Fabrication, performance, and mechanism

The highly stable biomass structure formed by cellulose, hemicellulose, and lignin results in incomplete conversion and carbonization under hydrothermal conditions. In this study, pretreated corn straw hydrochar (PCS-HC) was prepared using a low-temperature alkali/urea combination pretreatment method. The Mass loss rate of cellulose, hemicellulose, and lignin from pretreated biomass, as well as the effects of the pretreatment method on the physicochemical properties of PCS-HC and the adsorption performance of PCS-HC for alkaline dyes (rhodamine B and methylene blue), were investigated. The results showed that the low-temperature NaOH/urea pretreatment effectively disrupted the stable structure formed by cellulose, hemicellulose, and lignin. NaOH played a dominant role in solubilizing cellulose and the combination of low temperature and urea enhanced the ability of NaOH to remove cellulose, hemicellulose, and lignin. Compared to the untreated hydrochar, PCS-HC exhibited a rougher surface, a more abundant pore structure, and a larger specific surface area. The unpretreated hydrochar exhibited an adsorption capacity of 64.8% for rhodamine B and 66.32% for methylene blue. However, the removal of rhodamine B and methylene blue by PCS-BC increased to 89.12% and 90.71%, respectively, under the optimal pretreatment conditions. The PCS-HC exhibited a favorable adsorption capacity within the pH range of 6-9. However, the presence of co-existing anions such as Cl-, SO42-, CO32-, and NO3- hindered the adsorption capacity of PCS-HC. Among these anions, CO32- exhibited the highest level of inhibition. Chemisorption, including complexation, electrostatic attraction, and hydrogen bonding, were the primary mechanism for dye adsorption by PCS-HC. This study provides an efficient method for utilizing agricultural waste and treating dye wastewater.

Mechanism of peroxymonosulfate activation by nanoparticle Co@N-C: Experimental investigation and theoretical calculation

The release of organic dyes, such as Rhodamine B (RhB), into industrial wastewater has led to significant issues with color pollution in aquatic environments. Herein, we prepared a cobalt nanoparticles (NPs)-based catalyst with the nitrogen-doped carbon-support (Co@N-C) for effective PMS activation. The Co@N-C/PMS system demonstrated the excellent catalytic activity of Co@N-C for activating PMS, achieving nearly 100% degradation of RhB. Singlet oxygen (1O2) and sulfate radicals (SO4•-) were dominant reactive oxygen species for RhB degradation. Density functional theory (DFT) calculations substantiated that the production of 1O2 commenced with the initial generation of *OH through hydrogen abstraction from PMS, culminating in the direct release of oxygen to form 1O2 (PMS→*OH→O*→1O2). The generation of SO4•- was attributed to electron transfer to PMS from the surface of Co NPs (Co0→Co2+→Co3+) and the C-N shell (Co2+→Co3+). The research findings provided new insights into the development of Co-based heterogeneous catalysis for advanced oxidation of refractory organic pollutants in wastewater treatment.

Eco-friendly regeneration of lignin with acidic deep eutectic solvent for adsorption of pollutant dyes for water cleanup

In this study, a simple and eco-friendly method was used to treat alkaline lignin with an acidic deep eutectic solvent (DES) to obtain regenerated lignin for the efficient adsorption of pollutant dyes from aqueous environment. Based on the yield and adsorption capacity of the sorbent for these dyes, conditions such as the type and concentration of DES component, solid-to-liquid ratio, reaction time, and temperature were optimized. By characterizing and comparing alkali lignin with regenerated lignin, a series of reactions were demonstrated to occur during the DES treatment process. The performance and mechanism of methylene blue and rhodamine B adsorption on regenerated lignin were studied systematically, and the maximum adsorbed amounts were 348.29 and 551.05 mg/g at 323 K, respectively. This study provides a new strategy for the green preparation of functionalized lignin and its use in the water pollutant treatment.

In-situ preparation of lignin/Fe3O4 magnetic spheres as bifunctional material for the efficient removal of metal ions and methylene blue

In this paper, magnetic composite of lignin/Fe3O4 spheres were synthesized via a straightforward one-step in-situ solvothermal method showing good capacity for adsorbing heavy metal ions and dyes. The physicochemical properties of lignin/Fe3O4 spheres are analyzed using a range of techniques such as SEM, XRD, FTIR, VSM, TG, and BET. Lignin/Fe3O4 spheres exhibited high adsorption capacities of 100.00, 353.36 and 223.71 and 180.18 mg/g for Cu (II), Ni (II) and Cr (VI) metal ions and methylene blue (MB) with equilibrium attained within 60 min. After the recycling experiments, lignin/Fe3O4 spheres still possesses excellent superparamagnetic properties and displays high adsorption capacity. The lignin/Fe3O4 spheres are an efficient and continuous adsorbent to remove heavy metal ions of Cu (II), Ni (II), Cr (VI) and cationic dyes of methylene blue in wastewater, which proves the great potential in practical pollutants treatment applications for water systems.

Fabrication of two novel amino-functionalized and starch-coated CuFe2O4-modified magnetic biochar composites and their application in removing Pb2+ and Cd2+ from wastewater

Novel magnetic biochar composites (SFeCu@SBCO and FeCu@SBCO-NH2) were fabricated by modifying oxidized sawdust biochar (SBCO) with Fe/Cu loading, starch-coating/amination, characterized (FTIR, XRD, BET, SEM-EDS and XPS) and applied in capturing Pb2+ and Cd2+ from wastewater. Adsorption experiments revealed that SFeCu@SBCO and FeCu@SBCO-NH2 exhibited extraordinary adsorption performance toward Pb2+/Cd2+ with the maximum adsorption capacity reaching 184.26/173.35 mg g-1 and 201.43/190.81 mg g-1, respectively, which were >5 times higher than those of SBC. The great increase in adsorption capacity of the two adsorbents was ascribed to the introduction of CuFe2O4 and starch/amino groups. Pb2+ and Cd2+ adsorption was an endothermic reaction controlled by monolayer chemisorption. Complexation and electrostatic attraction were the two predominant mechanisms. Besides, ion exchange together with physical adsorption also occurred during the adsorption. Additionally, the both adsorbents displayed favorable stability and reusability as well as desirable anti-interfering ability to other metal cations. Taken together, the both adsorbents could be utilized as reusable magnetic adsorbents with promising prospect in the effective remediation of Pb2+/Cd2+ contaminated water. The study not only contributed to the better understanding of biochar modification strategy and the application of modified biochar in heavy metals pollutants removal, but also realized resource utilization of biomass waste.

Facile construction of lignin-based network composite hydrogel for efficient adsorption of methylene blue from wastewater

Adsorption method is an effective approach to treat wastewater containing methylene blue. Herein, a cost-effective and eco-friendly lignin-based network composite hydrogel adsorbent (PAA@SML) was constructed by using polyacrylic acid (PAA) to crosslink with sulfomethylated lignin (SML) via free radical polymerization for adsorption of methylene blue (MB) from wastewater. The constructed PAA@SML-0.2 exhibited remarkable adsorption performance towards removal of MB, with a maximum theoretical adsorption capacity of 777.1 mg·g-1. The improved efficiency can be attributed to the well-established network structure and abundant hydrophilic functional groups present in the adsorbent, promoting the interaction between methylene blue (MB) molecules and the adsorption sites of the adsorbent. The adsorption process of the adsorbent for MB followed the pseudo-second-order kinetic and the Langmuir isotherm models, which illustrated the adsorption process attributed to monolayer chemisorption. Mechanism investigation confirmed that the adsorption of MB by PAA@SML-0.2 primarily relied on hydrogen bonding and electrostatic interactions. Moreover, the recyclability test demonstrated excellent regeneration usability and stability of PAA@SML-0.2, and the adsorption capacity maintained above 74.0 % after five cycles. This constructed lignin-based network composite hydrogel is considered to have great potential in the treatment of organic dye in wastewater.

Recent advances in the synthesis and application of magnetic biochar for wastewater treatment

Magnetic biochar (MBC) is a novel bio-carbon material with both desired properties as adsorbent and magnetic characteristics. This review provides an up-to-date summary and discussion on the latest development of MBC, which covers the progress on its synthesis, application, and techno-economic analysis. The review indicates that the direct hydrothermal synthesis has been catching more research attention to produce MBC due to its mild reaction conditions. Instead of the Fe-loaded MBC, there is a trend of using Mn for the magnetization. For the MBC application, how to improve its adsorption performance for water decontamination, ideally to match that of the biochar (BC) or activated carbon, is important. In addition, more studies on the environmental impacts of MBC and life-cycle assessment decoding the process optimization options are necessary. This review will provide valuable references for the development of MBC and MBC-based materials for wastewater treatment.

Enhanced adsorption of phenol from aqueous solution by KOH combined Fe-Zn bimetallic oxide co-pyrolysis biochar: Fabrication, performance, and mechanism

In this study, impregnation combined with KOH activation with different mixing methods was used to prepare magnetic biochar. The effects of synthetic method on biochar physicochemical properties and adsorption performance were explored. The results showed that treatment of a Fe-Zn oxide with KOH activation provided excellent adsorption properties with adsorption capacity of 458.90 mg/g due to well-developed microporous structure and rich-in O-containing functional groups as well as exposed oxidizing functional groups (Fe2O3 and FeOOH). Langmuir-Freundlich and pseudo-second-order models accurately fit phenol adsorption. Neutral conditions (pH = 6) and lower ionic strengths were beneficial to phenol removal. Additionally, the predominant adsorption processes were physisorption and chemisorption. Correlation analyses and characterization data confirmed that pore filling, π-π interactions and surface complexation were the dominant driving forces for phenol adsorption. This research provides an environmentally friendly method for utilizing agricultural wastes for the removal of a variety of pollutions from aquatic environment.

Enhanced adsorption of Congo red from urea/calcium chloride co-modified biochar: Performance, mechanisms and toxicity assessment

Adsorbents with excellent physicochemical properties and green synthetic routes are desired for efficient removal of Congo red (CR) wastewater. Hence, a novel approach was proposed within this work. Biochar NCBC obtained from Medulla Tetrapanacis was synthesized through co-modification with urea/calcium chloride. NCBC exhibited an enormous surface area (750.09 m2/g) and a micro-mesoporous composite structure. Higher nitrogen content was detected on the surface of NCBC (8.17%) compared to that of urea directly modified biochar (4.63%). Nitrogen observed on the surface of NCBC was presented as graphitic N, pyrrolic N, amine N as well as pyridinic N. Kinetic and isothermal investigations revealed the active sites on NCBC to be homogeneous and bind to CR mainly by chemisorption. Calculated maximum sorption of CR on NCBC was 2512.82 mg/g basing on Langmuir model. Moreover, the practicality of NCBC was further proved by the cultivation of Nelumbo nucifera Gaertn. and Penicillium.

Adsorption of Rhodamine B and Pb(II) from aqueous solution by MoS2 nanosheet modified biochar: Fabrication, performance, and mechanisms

Mediated by polydopamine, MoS2 nanosheets were immobilized on the porous biochar derived from fungus residue, forming a novel biochar-based nanocomposite (MoS2-PDA@FRC) for the removal of Rhodamine B(RhB) and Pb(II) from water. Utilizing MoS2 nanosheets with abundant active adsorption sites, MoS2-PDA@FRC showed higher adsorption capacities than raw biochar, with 2.76 and 1.78 times higher capacities for RhB and Pb(II) respectively. MoS2-PDA@FRC also exhibited fast adsorption kinetics for RhB (120 min) and Pb (180 min) removal, as well as satisfactory adsorption selectivity in the presence of coexisting substances. The underlying removal mechanism was explored via Fourier transform infrared and X-ray photoelectron spectroscopies. Furthermore, during cyclic adsorption-regeneration and the fixed-bed adsorption experiments, the nanocomposite removed RhB and Pb(II) with high effectiveness and stability. Collectively, the results demonstrated the bright prospects of MoS2-PDA@FRC as a highly efficient decontamination agent of RhB and Pb(II) from water.

Effective Removal of Dyes from Wastewater by Osmanthus Fragrans Biomass Charcoal

The exploration of low-cost, high-performance adsorbents is a popular research issue. In this work, a straightforward method that combined hydrothermal with tube firing was used to produce Osmanthus fragrans biomass charcoal (OBC) from low-cost osmanthus for dye adsorption in water. The study examined the parameters of starting concentration, pH, and duration, which impacted the process of adsorption of different dyes by OBC. The analysis showed that the adsorption capacities of OBC for six dyes: malachite green (MG, C0 = 800 mg/L, pH = 7), Congo red (CR, C0 = 1000 mg/L, pH = 8), rhodamine B (RhB, C0 = 500 mg/L, pH = 6), methyl orange (MO, C0 = 1000 mg/L, pH = 7), methylene blue (MB, C0 = 700 mg/L, pH = 8), and crystalline violet (CV, C0 = 500 mg/L, pH = 7) were 6501.09, 2870.30, 554.93, 6277.72, 626.50, and 3539.34 mg/g, respectively. The pseudo-second-order model and the Langmuir isotherm model were compatible with the experimental findings, which suggested the dominance of ion exchange and chemisorption. The materials were characterized by using XRD, SEM, FTIR, BET, and XPS, and the results showed that OBC had an outstanding specific surface area (2063 m2·g-1), with potential adsorption mechanisms that included electrostatic mechanisms, hydrogen bonding, and π-π adsorption. The fact that the adsorption capacity did not drastically decrease after five cycles of adsorption and desorption suggests that OBC has the potential to be a dye adsorbent.

Magnetic Core@Shell Fe3O4@Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Adsorption materials have demonstrated huge potential in treating sewage; however, it is a great challenge to fabricate an adsorbent effectively adsorbing multiple dyestuffs and heavy metal ions simultaneously. Here, a magnetic core@shell Fe3O4@polypyrrole@sodium dodecyl sulfate (Fe3O4@PPy@SDS) composite is prepared through the combination of a hydrothermal method, an in situ polymerization method, and modification, exhibiting enhanced selective removal of five dyestuffs (methylene blue (MB), malachite green (MG), rhodamine B (RhB), Congo red (CR), acid red 1 (AR1)), and heavy metal ions (Mn(VII)). The effects of adsorbent type, time, initial concentration of the adsorbate, and temperature on adsorption performances are investigated in detail. Kinetics and isotherm studies indicate that all adsorption processes are more in line with the pseudo-second-order kinetic model and the Langmuir model, the diffusion behavior is controlled by intraparticle diffusion and liquid film diffusion, and research of thermodynamics reveals a spontaneous endothermic behavior. The removal efficiency after five desorption-adsorption cycles can still reach more than 90%. The prepared Fe3O4@PPy@SDS composite is an efficient and promising renewable adsorbent for the treatment of dyestuffs and Mn(VII), exhibiting a wide range of applications in the field of adsorption.

Simultaneously Cationic and Anionic Dyes Elimination via Magnetic Hydrochar Prepared from Copper Slag and Pinewood Sawdust

In practical wastewater, cationic and anionic dyes usually coexist, while synergistic removal of these pollutants is difficult due to their relatively opposite properties. In this work, copper slag (CS) modified hydrochar (CSHC) was designed as functional material by the one-pot method. Based on characterizations, the Fe species in CS can be converted to zero-valent iron and loaded onto a hydrochar substrate. The CSHC exhibited efficient removal rates for both cationic dyes (methylene blue, MB) and anionic dyes (methyl orange, MO), with a maximum capacity of 278.21 and 357.02 mg·g^-1, respectively, which was significantly higher than that of unmodified ones. The surface interactions of MB and MO between CSHC were mimicked by the Langmuir model and the pseudo-second-order model. In addition, the magnetic properties of CSHC were also observed, and the good magnetic properties enabled the adsorbent to be quickly separated from the solution with the help of magnets. The adsorption mechanisms include pore filling, complexation, precipitation, and electrostatic attraction. Moreover, the recycling experiments demonstrated the potential regenerative performance of CSHC. All these results shed light on the co-removal of cationic and anionic contaminates via these industrial by-products derived from environmental remediation materials.

Bamboo-derived nitrogen-doping magnetic porous hydrochar coactivated by K2FeO4 and CaCO3 for phenol removal: Governing factors and mechanisms

In this study, a novel nitrogen-doped magnetic Fe-Ca codoped biochar for phenol removal was successfully fabricated via a hydrothermal and coactivation pyrolysis method. A series of adsorption process parameters (K₂FeO₄ to CaCO₃ ratio, initial phenol concentration, pH value, adsorption time, adsorbent dosage and ion strength) and adsorption models (kinetic models, isotherms and thermodynamic models) were determined using batch experiments and various analysis techniques (XRD, BET, SEM-EDX, Raman spectroscopy, VSM, FTIR and XPS) to investigate the adsorption mechanism and metal-nitrogen-carbon interaction. The biochar with a ratio of Biochar: K₂FeO₄: CaCO₃ = 3:1:1 exhibited superior properties for adsorption of phenol and had a maximum adsorption capacity of 211.73 mg/g at 298 K, C₀ = 200 mg/L, pH = 6.0 and t = 480 min. These excellent adsorption properties were due to superior physicomechanical properties (a large specific surface area (610.53 m²/g) and pore volume (0.3950 cm³/g), a well-developed pore structure (hierarchical), a high graphitization degree (I_D/I_G = 2.02), the presence of O/N-rich functional groups and Fe-Ox,Ca-Ox, N-doping, as well as synergistic activation by K₂FeO₄ and CaCO₃). The Freundlich and pseudo-second-order models effectively fit the adsorption data, indicating multilayer physicochemical adsorption. Pore filling and π-π interactions were the predominant mechanisms for phenol removal, and H-bonding interactions, Lewis-acid-base interactions, and metal complexation played an important role in enhancing phenol removal. A simple, feasible approach with application potential to organic contaminant/pollutant removal was developed in this study.

One-pot preparation of layered double oxides-engineered biochar for the sustained removal of tetracycline in water

Tetracycline (TC) and sugarcane bagasse had both exerted enormous strain on environmental security. In this work, new composite adsorbent designed by impregnating bio-waste bagasse with magnesium-aluminum layered double oxides (BC-MA) was innovatively brought forward for TC removal. Benefiting from the abundant adsorption sites supplied by developed pores structure (0.308 cm³·g^-1), enlarged surface area (256.8 m²·g^-1) and reinforced functional groups, the maximum adsorption amount of BC-MA for TC reached 250.6 mg g^-1. Moreover, BC-MA displayed desirable adsorption capacity in diverse water environments coupled with excellent sustainable regeneration ability. The absorption process of TC by BC-MA was spontaneous and endothermic, and the pivotal rate-limiting stage pertained to intraparticle diffusion. The mechanisms proposed here mainly concerned π-π interactions, pore filling, complexation and hydrogen bonding. These findings suggested that the synthesis of modified biochar from bagasse would offer new opportunities for simultaneous waste resource reuse and water pollution control.

Adsorption-enhanced catalytic oxidation for long-lasting dynamic degradation of organic dyes by porous manganese-based biopolymeric catalyst

Improving the adsorption kinetics of metal-oxide catalysts is critical for the enhancement of catalytic performance in heterogeneous catalytic oxidation reactions. Herein, based on the biopolymer pomelo peels (PP) and metal-oxide catalyst manganese oxide (MnO_x), an adsorption-enhanced catalyst (MnO_x-PP) was constructed for catalytic organic dyes oxidative-degradation. MnO_x-PP shows excellent methylene blue (MB) and total carbon content (TOC) removal efficiency of 99.5 % and 66.31 % respectively, and keeps the long-lasting stable dynamic degradation efficiency during 72 h based on the self-built continuous single-pass MB purification device. The chemical structure similarity and negative-charge polarity sites of the biopolymer PP improve the adsorption kinetics of organic macromolecule MB, and construct the adsorption-enhanced catalytic oxidation microenvironment. Meanwhile, the adsorption-enhanced catalyst MnO_x-PP obtains lower ionization potential and O₂ adsorption energy to promote the continuous generation of active substance (O₂*, OH*) for the further catalytic oxidation of adsorbed MB molecules. This work explored the adsorption-enhanced catalytic oxidation mechanism for the degradation of organic pollutants, and provided a feasible technical idea for designing adsorption-enhanced catalysts for the long-lasting efficient removal of organic dyes.

Construction of Cu-N coordination into natural biopolymer lignin backbone for highly efficient and selective removal of cationic dyes

Here, a Cu²⁺-doped lignin-based adsorbent (Cu-AL) was fabricated via the amination and Cu²⁺-doping of industrial alkali lignin for massive and selective adsorption of cationic dyes azure B (AB) and saffron T (ST). The Cu-N coordination structures endowed Cu-AL with stronger electronegativity and higher dispersity. Through the electrostatic attraction, π-π interaction, H-bonding, and Cu²⁺ coordination, the adsorption capacities of AB and ST reached up to 1168 and 1420 mg g^-1, respectively. The pseudo-second-order model and Langmuir isotherm model were more relevant to the AB and ST adsorption on Cu-AL. Based on the thermodynamic study, the adsorption progresses were endothermic, spontaneous, and feasible. The Cu-AL maintained high removal efficiency to dyes after 4 reuses (>80%). Importantly, the Cu-AL could efficiently remove and separate AB and ST from dye mixtures even in real time. All the above characteristics demonstrated that Cu-AL was an excellent adsorbent for fast wastewater treatment.

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC₂O₄) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu²⁺ and Ca²⁺ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr⁶⁺, K⁺, Mg²⁺, Pb²⁺), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

Enhanced textile dye removal from wastewater using natural biosorbent and Shewanella algae B29: Application of Box Behnken design and genomic approach

In this study, Box-Behnken design combining seven factors at three levels were used to optimize the elimination of CI Reactive Red 66 in artificial seawater, by the combination of eco-friendly bio-sorbents and acclimated halotolerant microbial strain. Results showed that macro-algae and cuttlebone (2 %) were the best natural bio-sorbent. Additionally, the selected halotolerant strain able to rapidly remove dye was identified as Shewanella algae B29. The optimization process revealed that decolourization of CI Reactive Red 66 yields reached 91.04 % under the following variable values: dyes concentration (100 mg/l), salinity (30 g/l), peptone (2 %), pH (5), algae C (3 %), cuttlebone (1.5 %) and agitation (150 rpm). The whole genome analysis of S. algae B29 demonstrated the presence of several genes coding for valuable enzymes involved in textile dyes biotransformation, adaptation to stress as well as biofilm formation implying its potential use in biological textile wastewater treatment.

A Stable Fe-Zn Modified Sludge-Derived Biochar for Diuron Removal: Kinetics, Isotherms, Mechanism, and Practical Research

To remove typical herbicide diuron effectively, a novel sludge-derived modified biochar (SDMBC600) was prepared using sludge-derived biochar (SDBC600) as raw material and Fe-Zn as an activator and modifier in this study. The physico-chemical properties of SDMBC600 and the adsorption behavior of diuron on the SDMBC600 were studied systematically. The adsorption mechanisms as well as practical applications of SDMBC600 were also investigated and examined. The results showed that the SDMBC600 was chemically loaded with Fe-Zn and SDMBC600 had a larger specific surface area (204 m²/g) and pore volume (0.0985 cm³/g). The adsorption of diuron on SDMBC600 followed pseudo-second-order kinetics and the Langmuir isotherm model, with a maximum diuron adsorption capacity of 17.7 mg/g. The biochar could maintain a good adsorption performance (8.88-12.9 mg/g) under wide water quality conditions, in the pH of 2-10 and with the presence of humic acid and six typical metallic ions of 0-20 mg/L. The adsorption mechanisms of SDMBC600 for diuron were found to include surface complexation, π-π binding, hydrogen bonding, as well as pore filling. Additionally, the SDMBC600 was tested to be very stable with very low Fe and Zn leaching concentration ≤0.203 mg/L in the wide pH range. In addition, the SDMBC600 could maintain a high adsorption capacity (99.6%) after four times of regeneration and therefore, SDMBC600 could have a promising application for diuron removal in water treatment.

Fe-Al bimetallic oxides functionalized-biochar via ball milling for enhanced adsorption of tetracycline in water

The clusters formed by modified materials on its surface makes the application of functionalized biochars in adsorption face a great challenge. Here, a facile ball milling technology was innovatively proposed to tailor Fe-Al oxides-laden bagasse biochar to fabricate a novel adsorbent (BMFA-BC). Benefited from the increased exposure of Fe-Al oxides and, more importantly, enhanced functional groups by ball milling, the adsorption capacity of BMFA-BC for aqueous tetracycline reached up to 116.6 mg g^-1 at 298 K. And the adsorption performance was temperature-dependent. Characterization analysis, batch sorption (thermodynamics, kinetics, isotherms, chemical factors) as well as data modeling illustrated that this superior adsorption ability could be attributed to π-π conjugation, H-bonding, complexation as well as pore filling. BMFA-BC displayed good adsorption capacity in multiple aqueous environments. The excellent regeneration ability, magnetic susceptibility ensured its viability for sustainable pollutants removal. These superiorities revealed that BMFA-BC was a suitable sorbent for antibiotics elimination.

One-step preparation of lignin-based magnetic biochar as bifunctional material for the efficient removal of Cr(VI) and Congo red: Performance and practical application

The lignin-based magnetic biochar (LMB) was fabricated with a facile one-step solvothermal method. The spherical Fe₃O₄ was successfully loaded on the lignin-based biochar. LMB could efficiently remove Cr(VI) and Congo red (CR) synergistically with the adsorption of biochar and the catalytic/reduction of Fe₃O₄. LMB showed a removal efficiency of 100 % for Cr(VI) (100 mg/L) at 30 min. The LMB could be a catalyst to activate persulfate (PS) to degrade CR. The LMB + PS system showed a removal efficiency of 94.3 % for CR at 60 min. Moreover, LMB could simultaneously remove 41.5 % of Cr(VI) and 91.5 % of CR in the mixed Cr(VI) and CR solution. The simulated wastewater studies showed that LMB exhibited superior high Cr(VI) (100 %) and CR (82 %) removal efficiencies with the coexistent of anions, cations, and organic matter. LMB can be effectively applied to remove Cr(VI) and CR and purify different contaminated water bodies.

Olive mill wastewater from a liquid biological waste to a carbon/oxocalcium composite for selective and efficient removal of methylene blue and paracetamol from aqueous solution

In this study, a Carbon/Oxocalcium was prepared from olive mill wastewater and successfully applied to the removal of paracetamol and methylene blue (MB) from an aqueous medium. The optimized composite (0.3 % CaO) is rich in anionic sites, porous and has a specific surface area of about 1383 m².g^-1. Adsorption tests showed significant adsorption capacities up to 1141 mg.g^-1. The adsorption of MB and paracetamol is well described by the Redlich-Peterson and Dubinin-Radushkevich isotherm, respectively. Moreover, the adsorption kinetics fitted to pseudo-second order. The π -π interactions, hydrogen bonds and electrostatic interactions were responsible for the adsorption of paracetamol and MB substrates. This work develops by a single, easy and simple action a new effective and selective material for the removal of emerging pollutants, a new method for the development of more stable carbon composites and a cost-effective method for the valorization of olive mill wastewater.

Adsorption characteristics and mechanisms of Cd2+ from aqueous solution by biochar derived from corn stover

Corn stover could be pyrolysed to prepare biochar for removing pollutants in water and realizing the resource utilization of biomass. The aims of the present study were to investigate the optimal preparation and adsorption conditions of biochar and to reveal the adsorption characteristics and mechanisms of Cd²⁺ in water by biochar. For this purpose, with Cd²⁺ as the target pollutant, the pyrolysis conditions involved in the pyrolysis temperature, retention time, and heating rate were evaluated and optimized. Additionally, the characteristics, mechanisms and optimal adsorption conditions of Cd²⁺ by biochar were determined. A series of characterization techniques was employed, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and specific surface area analysis (S_BET). The optimum pyrolysis parameters were a pyrolysis temperature of 700 °C, a retention time of 2.5 h, and a heating rate of 5 °C/min. Acid/base modification did not improve the adsorption capacity of biochar. The Langmuir and the Elovich model were the most suitable isotherm and kinetic models for equilibrium data, respectively. The maximum adsorption capacity fitted by Langmuir model was 13.4 mg/g. Furthermore, mineral precipitation and π electron interactions were shown to be the main adsorption mechanisms of Cd²⁺. The optimum adsorption conditions for Cd²⁺ in water were a CaCl₂ electrolyte solution of 0.01 mol/L, a pH level of 6.7, and a biochar dosage of 0.4 g. Our results indicated that corn stover biochar was an appropriate approach for improving the status of water with Cd²⁺ contamination in the short term and for promoting a new perspective for the rational utilization of corn stover and the low-cost pollution control of heavy metals in water.

Three novel Co(II)-based MOFs: Syntheses, structural diversity, and adsorption properties

In this paper, three new cobalt-based metal organic frameworks (MOFs) with different topologies, namely {[Co(HL)(tib)(H2O)]·2H2O}n (1), [Co3(L)2(bibp)4(H2O)2]n (2) and [Co2(L)(bip)(μ3-OH)]n (3) (H3L = 3-(3,5-dicarboxylphenoxy)-6-carboxylpyridine, tib = 1,3,5-tirs(1-imidazolyl)benzene, bibp = 4,4'-bis(imidazolyl)biphenyl,...