3D graphene-based foam induced by phytic acid: An effective enzyme-mimic catalyst for electrochemical detection of cell-released superoxide anion

Electrochemical detection of superoxide anion in living systems: Recent trends and clinical implications

Superoxide plays a significant role in maintaining physiological states of living systems, with major roles in eradicating invading microorganisms and in cell signaling. It is regulated intricately by the enzyme superoxide dismutase (SOD), and when not properly regulated it can lead to cascade biological pathways with severe and irreversible damage to biofilms, tissue, and organs, being linked with many neurodegenerative diseases, atherosclerotic and cardiovascular diseases. Therefore, superoxide anion (O2•-) detection has a tremendous potential in clinical diagnostics to assess oxidative stress in living cells. This comprehensive review aims to explore, discuss, and analyze recent trends in the electrochemical detection of O2•- in living systems, focusing not only on the recognition mechanism for in vitro assays (living cell cultures/tissues) but also on the importance of the electrode design and operational parameters for in vivo measurements (implantable sensors). By analyzing current in vitro/in vivo electrochemical strategies we gather information that is helpful to overcome existing limitations in the dynamic monitoring of O2•-, and further improve electrochemical strategies that can be adopted and applied to prevent its negative effect, with an insight into the pathophysiology of neurodegenerative disorders and even cellular malignancies that derive from its accumulation in living systems.

Carbon-doped bimetallic oxide nanoflakes for simultaneous electrochemical analysis of ascorbic acid, uric acid, and acetaminophen in sweat

Non-invasive continuous detection using tears or sweat as substitutes for blood samples has become an emerging method for real-time monitoring of human health. However, its development is limited by the low sample volume and low level of analytes. The simultaneous determination of multi-analytes with highly sensitive electrochemical sensing platforms has undoubtedly resulted in breakthrough innovations. Furthermore, the determination mode of multi-analyte combinations can accurately characterize the course of certain diseases. In particular, the simultaneous determination of ascorbic acid (AA), uric acid (UA), and acetaminophen (AC) in sweat will provide a one-stop detection system for cardiovascular and degenerative diseases for the entire course analysis. A sacrificial template strategy was adopted in this work using graphene oxide (GO) to guide the growth of two-dimensional Fe-Co composite nanoflakes with large specific surface areas. Defects were introduced via doping carbon through the incomplete pyrolysis of GO. The synthesized C-Fe1.33Co1.67O4 exhibited massive redox sites and was highly reactive, which met the requirements for multi-substance analysis. The electrochemical sensor based on C-Fe1.33Co1.67O4 accurately and sensitively demonstrated simultaneous detection of AA, UA, and AC in sweat, with a wide detection range for AA (4.0-11500 μM) and high sensitivity for UA and AC (304.5 μA mM-1 and 404.1 μA mM-1, respectively), along with low detection limit (1.69 μM for AA, 0.23 μM for UA, and 0.07 μM for AC). The sensor also possessed adequate mechanical flexibility, making it suitable for body surface detection, and its performance was maintained above 80% after high-intensity bending 350 times.

Foaming and cross-linking of cellulose fibers using phytic acid

Bio-based compounds have become the focus in the development of next-generation materials. The polyphosphated structure and availability of phytic acid has sparked an interest to understand its properties and apply it to making fire-retardant fabrics. However, its degradative effect on natural fibers sets limitations to its potential uses. In this study, we unveiled a new dimension to explore with phytic acid: cellulose fiber foams. Phytic acid enabled synergistic foaming with carboxymethyl cellulose albeit causing issues in long-term wet foam stability. Adding cellulose fibers to this mixture and drying at 160 °C produced solid foams with increased compressive strength and stiffness; comparable to foams cross-linked with the commonly used citric acid. The reduced contact area in low-density fiber networks allowed the cross-linking between phytic acid and the fiber network to mitigate structural weakening due to fiber degradation. Imaging also revealed the formation of a film encompassing fiber bonds; attributed to the strong interaction between phytic acid and carboxymethyl cellulose. Furthermore, phytic acid imparted self-extinguishing fire-retardant properties to the cellulose fiber foams measured using thermogravimetric analysis and cone calorimetry. This work showcases a simple new application for phytic acid without the use of catalysts or solvents. It serves to encourage further development of green practices to continuously challenge the industrial landscape.

Determination of uric acid in serum by SERS system based on VO-MnCo2O4/Ag nanozyme

The level of uric acid is crucial to human health. Octahedral oxygen vacancy MnCo₂O₄/Ag (V_O-MnCo₂O₄/Ag) nanozyme was successfully prepared by simple hydrothermal, calcination and self-reduction methods. V_O-MnCo₂O₄/Ag nanozyme is rich in Mn²⁺/Mn³⁺ and C_O²⁺/C_O³⁺ redox electron pairs, large specific surface area and oxygen vacancies. V_O-MnCo₂O₄/Ag nanozyme showed high uricase-like activity and peroxidase-like activity. At the same time, the SERS signal of the detected molecule could be significantly enhanced after the catalytic reaction of the V_O-MnCo₂O₄/Ag nanozyme. The K_m values of V_O-MnCo₂O₄/Ag nanozyme for H₂O₂ and TMB were 0.04 mM and 0.027 mM respectively. Based on the uric acid oxidase-like and peroxidase-like activities of V_O-MnCo₂O₄/Ag, we developed a label-free, sensitive, and reliable SERS uric acid detection system. The detection linear range of uric acid is 0.01 μM-1000 μM and the detection of limit is 7.8 × 10^-9 M. The results show that the sensing system has good accuracy, sensitivity, selectivity, and stability. It can be applied to the determination of samples under different conditions. This study provides profound insights into the design of enzyme-like activity regulation and SERS properties regulation of nanozymes, provides guidance for the study of reaction kinetics and catalytic mechanism of nanozymes, and has broad application prospects in the field of nanozymes and SERS sensing analysis.

Plasmonic surface-enhanced Raman scattering nano-substrates for detection of anionic environmental contaminants: Current progress and future perspectives

Surface-enhanced Raman scattering spectroscopy (SERS) is a powerful technique of vibrational spectroscopy based on the inelastic scattering of incident photons by molecular species. It has unique properties such as ultra-sensitivity, selectivity, non-destructivity, speed, and fingerprinting properties for analytical and sensing applications. This enables SERS to be widely used in real-world sample analysis and basic plasmonic mechanistic studies. However, the desirable properties of SERS are compromised by the high cost and low reproducibility of the signals. The development of multifunctional, stable and reusable nano-engineered SERS substrates is a viable solution to circumvent these drawbacks. Recently, plasmonic SERS active nano-substrates with various morphologies have attracted the attention of researchers due to promising properties such as the formation of dense hot spots, additional stability, tunable and controlled morphology, and surface functionalization. This comprehensive review focused on the current advances in the field of SERS active nanosubstrates suitable for the detection and quantification of anionic environmental pollutants. The common fabrication methods, including the techniques for morphological adjustments and surface modification, substrate categories, and the design of nanotechnologically fabricated plasmonic SERS substrates for anion detection are systematically presented. Here, the need for the design, synthesis, and functionalization of SERS nano-substrates for anions of great environmental importance is explained in detail. In addition, the broad categories of SERS nano-substrates, namely colloid-based SERS substrates and solid-support SERS substrates are discussed. Moreover, a brief discussion of SERS detection of certain anionic pollutants in the environment is presented. Finally, the prospects in the fabrication and commercialization of pilot-scale handheld SERS sensors and the construction of smart nanosubstrates integrated with novel amplifying materials for the detection of anions of environmental and health concern are proposed.

Interfacial Regulation of ZIF-67 on Bacteria to Generate Bifunctional Sensing Material on Chip for Qualifying Cell-Released Reactive Oxygen Species

Cell's activities are highly dependent on signal molecules, of which reactive oxygen species of the superoxide anion (O₂^•-) and hydrogen peroxide (H₂O₂) are important ones that always work together to regulate biological processes such as apoptosis and oxidative stress. It is of significance to realize simultaneous qualification of O₂^•- and H₂O₂ but it still faces challenges particularly in live-cell assay with a complex environment. We report the design of a bifunctional sensing material by interfacially regulating ZIF-67 on bacteria Shewanella putrefaciens to generate cobalt nanoparticles/nitrogen-doped porous carbon nanorods (Co/N-doped CNRs) and its sensing chip for qualifying cell-released O₂^•- and H₂O₂. Co/N-doped CNRs exhibit unique properties including porous structure for significantly increased reaction surface area and coordinating Co nanoparticles for rich active sites. The bifunctional Co/N-doped CNRs is used to fabricate the electrochemical sensing chip, which achieves a fast response time (0.5 s for O₂^•-, 1.9 s for H₂O₂), a low detection limit (0.69 nM for O₂^•-, 2.25 μM for H₂O₂), and a remarkably high sensitivity (792.30 μA·μM^-1·cm^-2 for O₂^•-, 153.91 μA·mM^-1·cm^-2 for H₂O₂), among the best of reported bifunctional nanozymes.

Three-dimensional flexible and stretchable gold foam scaffold for real-time electrochemical sensing in cells and in vivo

Compared with typical two-dimensional electrodes, the three-dimensional (3D) cell culture platform can simulate the real cell survival environment for cell growth to accurately reproduce cell functions. Moreover, considering that living cells are exposed to various of mechanical force in the microenvironment, the construction of 3D electrodes with excellent flexible, stretchable, and biocompatibility is of great significance to real-time monitor mechanically evoked biomolecule release from cells. Herein, we demonstrated a straightforward and effective three-step approach to fabricate three-dimensional flexible and stretchable gold foam scaffold (3D Au foam scaffold) for construction of 3D cell culture integrated electrochemical sensing platform. The excellent biological and electrical properties of Au nanostructures and porous networks of the 3D scaffold endow the platform with desirable biocompatibility and sensitive electrochemical sensing performance. As a proof of concept, the 3D Au foam scaffold functionalized with cobalt based nanocubes (Co NCs/Au foam scaffold) was validated to provide 3D culture for human umbilical vein endothelial cells (HUVECs), and synchronously real-time monitor superoxide anion (O₂^•-) released by HUVECs under mechanical stretching. Furthermore, 3-mercaptopropionic acid (3-MPA) modified 3D Au foam (3-MPA/Au foam scaffold) was successfully used for real-time monitoring of catecholamines in rat brain. The results demonstrate the great potential of this 3D Au foam scaffold for real-time electrochemical monitoring biomolecules in vitro and in vivo, providing convenience for future research on mechanotransduction relevant processes.

Two-dimensional mesoporous nitrogen-rich carbon nanosheets loaded with CeO2 nanoclusters as nanozymes for the electrochemical detection of superoxide anions in HepG2 cells

Two-dimensional (2D) porous carbon-based composite nanosheets loaded with metal oxide nanoclusters are expected to be promising electrocatalysts for high-performance electrochemical sensors. However, for this complicated composite material, strict reaction conditions and complex synthesis steps limit its general application in electrochemical detection. Here we present a facile method to fabricate 2D mesoporous nitrogen-rich carbon nanosheets loaded with CeO₂ nanoclusters (2D-mNC@CeO₂), for fabricating superoxide anions (O₂^•-) electrochemical sensor. The method is based on block copolymers self-assembly and the affinity of polydopamine to metal ions to obtain organic-inorganic hybrid, which can be directly converted into 2D-mNC@CeO₂ through carbonization strategy without structural deterioration. Characterizations demonstrate that the 2D-mNC@CeO₂ owned the 2D N-doped carbon structure with an interlinked hierarchical mesoporous and the uniformly dispersed CeO₂ nanoclusters on the surface. Benefitted from the unique structure, the 2D-mNC@CeO₂ shortens electron transfer distance, enhances mass transfer efficiency, exposes numerous active sites, and obtain a high Ce³⁺/Ce⁴⁺ ratio for improving electrocatalytic performance. The 2D-mNC@CeO₂/SPCEs sensors for O₂^•- detection has a detection limit of 0.179 μM (S/N = 3) and sensitivity of 401.4 μA cm^-2 mM^-1. The sensors can be applied to capture electrochemical signals of O₂^•- released from HepG2 cells, demonstrating the application potential of the sensors to monitor O₂^•- in biological fields.

Review on oxidative stress relation on COVID-19: Biomolecular and bioanalytical approach

COVID-19 disease has put life of people in stress worldwide from many aspects. Since the virus has mutated in absolutely short period of time the challenge to find a suitable vaccine has become harder. Infection to COVID-19, especially at severe life threatening states is highly dependent on the strength of the host immune system. This system is partially dependent on the balance between oxidative stress and antioxidant. Besides, this virus still has unknown mechanism of action companied by a probable commune period. From another hand, some reactive oxygen species (ROS) levels can be helpful on the state determination of the disease. Thus it could be possible to use modern bioanalytical techniques for their detection and determination, which could indicate the disease state at the golden time window since they have the potential to show whether specific DNA, RNA, enzymes and proteins are affected. This also could be used as a preclude study or a reliable pathway to define the best optimized time of cure beside effective medical actions. Herein, some ROS and their relation with SARS-CoV-2 virus have been considered. In addition, modern bioelectroanalytical techniques on this approach from quantitative and qualitative points of view have been reviewed.

Cobalt-doped cerium oxide nanocrystals shelled 1D SnO2 structures for highly sensitive and selective xanthine detection in biofluids

In this study, we prepared a three-dimensional self-supported electrocatalyst based on a thin layer of cerium oxide nanocrystals doped with cobalt heteroatoms (CeO₂-Co) and then uniformly shelled over one-dimensional tin oxide (SnO₂) nanorods supported by carbon cloth substrate. The material was used as a binder-free sensor that could nonenzymatically detect xanthine (XA) with an excellent sensitivity of 3.56 μA μM^-1, wide linear range of 25 nM to 55 µM, low detection limit of 58 nM, and good selectivity. A screen-printed electrode based on the material accurately detected XA in food samples as well. The achievements were resulted from synergistic effects coming from the unique core@shell formation and Co-doping strategy, which efficiently modified electronic structure of the material to expose more electroactive site numbers/types and fast charge transfer, thereby producing intrinsic catalytic properties for XA oxidation. These results suggested that the SnO₂@CeO₂-Co is potential for developing efficient sensor to detect XA with good sensitivity and accuracy in food-quality monitoring.

Facile synthesis of ultrathin two-dimensional graphene-like CeO2-TiO2 mesoporous nanosheet loaded with Ag nanoparticles for non-enzymatic electrochemical detection of superoxide anions in HepG2 cells

Here we presented a new facile strategy to fabricate ultrathin two-dimensional (2D) metal oxide nanosheets, by using polydopamine-coated graphene (rGO@PDA) as a template under simply wet-chemical conditions. Based on the strategy, graphene-like CeO₂-TiO₂ mesoporous nanosheet (MNS-CeO₂-TiO₂) was prepared and was loaded with dispersive Ag nanoparticles (AgNPs) to obtain effective electrocatalysts (denoted as Ag/MNS-CeO₂-TiO₂) for electrochemical detection of superoxide anion (O₂^•-). Characterizations demonstrated that MNS-CeO₂-TiO₂ exhibited ultrathin thickness, larger specific surface area, and pore volume in comparison with its bulk counterpart. The above properties of MNS-CeO₂-TiO₂ shorten electron transmission distance, promotes mass transfer, and is conducive to the dispersion of post-modified AgNPs. Therefore, the recommended Ag/MNS-CeO₂-TiO₂ sensors (denoted as Ag/MNS-CeO₂-TiO₂/SPCE) exhibited satisfactory properties, including the sensitivity of 737.1 μA cm^-2 mM^-1, the detection limit of 0.0879 μM (S/N = 3), and good selectivity. Meanwhile, the sensors also successfully realized in the online monitoring of O₂^•- released from HepG2 cells, meaning the prepared sensors had practical application potential towards the analysis of O₂^•- in biological samples.

Ultrasonic preparation and nanosheets supported binary metal oxide nanocomposite for the effective application towards the electrochemical sensor

Binary metal oxides (La₂O₃@SnO₂) decorated reduced graphene oxide nanocomposite was synthesized by ultrasound process in an environmentally benign solvent with a working frequency of 25 and 40 kHz (6.5 l200 H, Dakshin, India and maximum input power 210 W). Further, to enhance the electrocatalytic activity, the reduced graphene oxide (rGO) was prepared from graphene oxide by ultrasonication method. As prepared La₂O₃@SnO₂/rGO was scrutinized using XRD, TEM, EDX and quantitative test for the structural and morphology properties. As modified La₂O₃@SnO₂/rGO nanocomposite exhibits better electrochemical activity towards the oxidation of methyl nicotinate with higher anodic current compared to other modified and unmodified electrode for the detection of methyl nicotinate with larger linear range (0.035-522.9 µM) and lower limit of detection (0.0197 µM). In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.

A metal-free and preconcentration-free method for non-enzymatic amperometric determination of pentachlorophenol using a ZIF-derived hollow carbon material

An enzyme-free, metal-free, and preconcentration-free electrochemical sensor for pentachlorophenol assay has been fabricated. The interface of the sensor is based on a hollow zeolitic imidazolate framework-derived mesoporous carbon material (denoted as HZC/SPCE). The sensor exhibits linear amperometric response upon pentachlorophenol at 0.82 V (vs. Ag/AgCl) in the concentration range 0.001 to 26.8 mg L^-1 (3.75 × 10^-8~1.006 × 10^-4 M) (R² = 0.997). The sensitivity of HZC/SPCE is 3.53 × 10² μA mM^-1 cm^-2 with a detection limit of 2.05 × 10^-9 M (S/N = 3) for pentachlorophenol. The method has been applied to the determination of pentachlorophenol in spiked food packaging samples with recoveries in the range 92.0 to 107.0%. Graphical abstract Schematic representation of the synthesis of hollow ZIFs-derived hollow carbon material. Free protons derived from tannic acid penetrated into ZIF-8 to destroy its solid framework and the outer parts covered by tannic acid were protected from further etching. After pyrolysis, the morphology of HZC remained similar to that of HZIF-8. Abbreviation: CTAB: hexadecyl trimethyl ammonium bromide; Melm: 2-methylimidazole; ZIF-8: zeolitic imidazolate framework-8; TA: tannic acid; HZIF-8: hollow zeolitic imidazolate framework-8; HZC: hollow zeolitic imidazolate frameworks (ZIFs)-derived mesoporous carbon material.

Shear Exfoliated Metal-Organic Framework Nanosheet-Enabled Flexible Sensor for Real-Time Monitoring of Superoxide Anion

Recently, two-dimensional metal-organic framework (2D MOF) nanosheets have drawn a lot of attention on account of their various advantages, like ultrathin thickness, ultralarge specific surface area, abundant accessible active sites, favorable solution dispersion properties, and ease of designability. However, until now, it is still difficult to produce 2D MOF nanosheets in large scale, which hinders the practical applications of 2D MOF nanosheets. Here, for the first time, we introduced a novel shear exfoliation method to prepare scalable 2D MOF nanosheets by using a commercial blender. As a proof of concept, we used two kinds of layer-structured MOFs (ELM-12, Cu(bpy)₂(OTf)₂, bpy = 4,4-bipyridine, OTf = trifluoromethanesulfonate and Zn₂(bim)₄, bim = benzimidazole) as samples to prepare MOF nanosheets. The thickness of the two kinds of MOF nanosheets obtained is 3-5 nm. Notably, the exfoliated MOF nanosheet (ELM-12) shows improved electrochemical catalytic activity compared with its bulk counterpart. Based on this, an ELM-12 nanosheet-based flexible sensor was developed for detecting superoxide anions (O₂^•-) released from cancer cells. The fabricated flexible sensor displays excellent sensitivity, selectivity, flexibility, stability, and reproducibility.

Bimetallic nanoparticles decorated hollow nanoporous carbon framework as nanozyme biosensor for highly sensitive electrochemical sensing of uric acid

An ultrasensitive electrochemical biosensor was developed to identify the low levels of uric acid (UA) in human serum. The gold/cobalt (Au/Co) bimetallic nanoparticles (NPs) decorated hollow nanoporous carbon framework (Au/Co@HNCF) was synthesized as a nanozyme by pyrolysis of the Au (III)-etching zeolitic imidazolate framework-67 (ZIF-67). The external Au NPs combined with internal Co NPs on the hollow carbon framework exhibited enhanced activity for UA oxidation, thereby generating superior signals. Accordingly, the Au/Co@HNCF biosensor presented ranking performances with a low detection limit of 0.023 μM (S/N = 3), an ultrahigh sensitivity of 48.4 μA μM^-1 cm^-2, and an extensive response in the linear region of 0.1-25 μM and the logarithmic region of 25-2500 μM. Owing to the ordered nanoporous framework and carbon interfacial features, the Au/Co@HNCF biosensor displayed adequate selectivity for UA sensing over a series of biomolecules. In addition, the Au/Co@HNCF biosensor was employed to quantify UA in human serum samples. The test results were basically consistent with those of a commercial apparatus, and thus demonstrated that the proposed Au/Co@HNCF biosensor was reliable for UA determination in clinical research.

Electrochemical detection of superoxide anions in HeLa cells by using two enzyme-free sensors prepared from ZIF-8-derived carbon nanomaterials

Two kinds of carbon-based nanozymes were constructed from the same precursor of zeolitic imidazolate framework-8 (ZIF-8) for O₂^•- determination. Hollow carbon cubic nanomaterial (labelled as HCC) was obtained by chemically etching ZIF-8 with tannic acid and a subsequent calcination. A porous carbon cubic nanomaterial (labelled as PCC) was prepared by directly pyrolysis. Then HCC and PCC were immobilized on the surface of screen printed carbon electrodes (SPCE), fabricating HCC and PCC modified electrodes (denoted as HCC/SPCE and PCC/SPCE). HCC/SPCE, best operated at -0.5 V (vs. Ag/AgCl), has a sensitivity of 6.55 × 10² nA μM^-1 cm^-2 with a detection limit of 207 nM (at S/N = 3) for O₂^•- sensing. And PCC/SPCE, best operated at -0.4 V (vs. Ag/AgCl), exhibited a superior performance for O₂^•- detection with a sensitivity of 1.14 × 10³ nA μM^-1 cm^-2 and a low detection limit of 140 nM (at S/N = 3). The two sensors possess excellent reproducibility and stability. They were used to sense O₂^•- released from HeLa cells. Graphical abstract Illustration of the synthesis of the hollow carbon cubic nanomaterial (HCC) and of the porous carbon cubic nanomaterial (PCC), and the scheme for detection of superoxide anions in HeLa cell.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Carbon-mediated synthesis of shape-controllable manganese phosphate as nanozymes for modulation of superoxide anions in HeLa cells

Here we present a facile method to fabricate shape-controllable transition metal phosphates by using hollow carbon structures as substrates for superoxide sensing.