Opto-electrochemical functionality of Ru(II)-reinforced graphene oxide nanosheets for immunosensing of dengue virus non-structural 1 protein

Red Fluorescent Copper Nanoclusters for Fluorescence, Smartphone, and Electrochemical Sensor Arrays to Detect the Monkeypox A29 Protein

An Orthopox zoonotic viral infection called monkeypox (MPXV) is the leading infectious disease globally. MPXV can easily spread from human to human through direct and indirect sexual contact; therefore, accurate and early detection of MPXV is crucial for reducing mortality. Fluorescence-based materials have received significant attention in recent years for biomedical applications. In this study, we synthesized red-fluorescent copper nanoclusters (CuNCs) with a size of less than 10 nm, which was confirmed by high-resolution transmission electron microscopy (HR-TEM) and atomic force microscopy (Bio-AFM) analysis. The synthesized CuNCs had a high fluorescence nature and were utilized for the detection of the MPXV (A29P) by an antigen-antibody conjugation using fluorescence, smartphone colorimetric, and electrochemical sensing techniques. The antigen (A29P) and antibody (Ab A29) interaction mechanisms were studied by X-ray photoelectron spectroscopic (XPS) analysis. Furthermore, fluorescence and electrochemical sensing were performed in PBS with detection limits of 0.096 and 0.114 nM, respectively. For real-world applications, the prepared immunosensor array can detect A29P in spiked serum samples, and point-of-care (POC) analysis, a smartphone-integrated sensor array, was used to measure the RGB color changes. The results showed that synthesized CuNCs are potential materials for detecting A29P via fluorescence and smartphone colorimetric and electrochemical sensing techniques.

Electrochemical Sensors and Biosensors for Identification of Viruses: A Critical Review

Due to their life cycle, viruses can disrupt the metabolism of their hosts, causing diseases. If we want to disrupt their life cycle, it is necessary to identify their presence. For this purpose, it is possible to use several molecular-biological and bioanalytical methods. The reference selection was performed based on electronic databases (2020-2023). This review focused on electrochemical methods with high sensitivity and selectivity (53% voltammetry/amperometry, 33% impedance, and 12% other methods) which showed their great potential for detecting various viruses. Moreover, the aforementioned electrochemical methods have considerable potential to be applicable for care-point use as they are portable due to their miniaturizability and fast speed analysis (minutes to hours), and are relatively easy to interpret. A total of 2011 articles were found, of which 86 original papers were subsequently evaluated (the majority of which are focused on human pathogens, whereas articles dealing with plant pathogens are in the minority). Thirty-two species of viruses were included in the evaluation. It was found that most of the examined research studies (77%) used nanotechnological modifications. Other ones performed immunological (52%) or genetic analyses (43%) for virus detection. 5% of the reports used peptides to increase the method's sensitivity. When evaluable, 65% of the research studies had LOD values in the order of ng or nM. The vast majority (79%) of the studies represent proof of concept and possibilities with low application potential and a high need of further research experimental work.

Fabrication of label-free immunoprobe for monkeypox A29 detection using one-step electrodeposited molybdenum oxide-graphene quantum rods

Monkeypox is a zoonotic viral infection caused by the monkeypox virus (MPXV), which belongs to the Poxviridae family of the Orthopoxvirus (OPXV) genus. Monkeypox is transmitted from animals to humans and humans to humans; therefore, the accurate and early detection of MPXV is crucial for reducing mortality. A novel graphene-based material, graphene quantum rods (GQRs) was synthesized and confirmed using high-resolution transmission electron microscopy (HR-TEM) and atomic force microscopy (AFM). In this study, molybdenum oxide was electrodeposited and one-pot electrodeposition of MoO3-GQRs composite on carbon fiber paper (CFP) enabled by an antibody (Ab A29)/MoO3-GQRs immunoprobe was developed for the early diagnosis of MPXV protein (A29P). Several studies were conducted to analyze the MoO3-GQRs composite, and the prepared Ab A29/MoO3-GQRs immunoprobe selectively bound to the A29P antigen that was measured using differential pulse voltammetry (DPV) analysis and impedance spectroscopy. The antigen-antibody interaction was analyzed using X-ray photoelectron spectroscopy. DPV analysis showed a wide linear range of detection from 0.5 nM to 1000 nM, a detection limit of 0.52 nM, and a sensitivity of 4.51 µA in PBS. The prepared immunoprobe was used to analyze A29P in serum samples without reducing electrode sensitivity. This system is promising for the clinical analysis of A29P antigen and offers several advantages, including cost-effectiveness, ease of use, accuracy, and high sensitivity.

Point-of-care dengue detection: polydopamine-modified electrode for rapid NS1 protein testing for clinical samples

Early diagnosis of dengue infection by detecting the dengue virus non-structural protein 1 (DENV-NS1) is important to the patients to initiate speedy treatment. Enzyme-linked immunosorbent assay (ELISA)-based NS1 detection and RT-PCR are time-consuming and too complex to be employed in remote areas of dengue-endemic countries. Meanwhile, those of NS1 rapid test by lateral flow assay suffer from low detection limit. Electrochemical-based biosensors using screen-printed gold electrodes (SPGEs) have become a reliable detection method to convey both ELISA's high sensitivity and rapid test portability. In this research, we developed an electrochemical biosensor for DENV-NS1 detection by employing polydopamine (PDA)-modified SPGE. The electrodeposition of PDA on the surface of SPGE serves as a bioconjugation avenue for anti-NS1 antibody through a simple and low-cost immobilization procedure. The biosensor performance was evaluated to detect DENV-NS1 protein in PBS and human serum through a differential pulse voltammetric (DPV) technique. The developed sensing platform displayed a low limit of detection (LOD) of 1.63 pg mL-1 and a wide linear range of 10 pg mL-1 to 1 ng mL-1 (R2 ∼ 0.969). The sensing platform also detected DEV-NS1 from four different serotypes in the clinical samples collected from dengue patients in India and Indonesia, with acceptable sensitivity, specificity, and accuracy values of 90.00%, 80.95%, and 87.65%, respectively. This result showcased the facile and versatile method of PDA coating onto the surface of screen-printed gold electrodes for a miniaturized point-of-care (PoC) detection device.

Label-free genosensing of dengue serotypes with an electrodeposited reduced graphene oxide-tris(bipyridine)ruthenium(II)

Constructing a label-free electrochemical transducer platform without compromising inherent biocompatibility against specific bioreceptor remains challenging, particularly probing nucleic acid hybridization at electrode interface without external redox-mediator. Here, we show that electrochemically reduced graphene oxide-tris(bipyridine)ruthenium(II) (ErGO-TBR) nanosheets electrodeposited on carbon screen printed electrode can quantify hybridization of clinically important target sequences specific to serotypes of dengue virus (DENV) non-structural 1 (NS1) protein. Different variables including deposition potential, time, and electrolytic composition were optimized for fabrication of label-free transducer platform. Structural and electrochemical properties of ErGO-TBR/SPE were comprehensively elucidated using microscopic and spectroscopic techniques. Electrochemical quartz crystal microbalance (EQCM) analysis reveals the growth of electrodeposited redox-active species on the electrode interface. Surface functional group investigations suggested that TBR deposited on the basal and edges of ErGO substrate via electrostatic and π-π interactions. Functionalization of bio-affinity layer (B) on ErGO-TBR/SPE enables better loading of probe DNA (PDNA) toward specific detection of DENV target DNA (TDNA) with an ultralow detection limit promising for clinical diagnosis. Scalable chronoamperometry-based redox-active surface growth, customizable bioactivation strategy and external mediator-less probing of nucleic acid hybridization make the present system suitable for other translational application in healthcare diagnosis.

Perspectives for the creation of a new type of vaccine preparations based on pseudovirus particles using polio vaccine as an example

Traditional antiviral vaccines are currently created by inactivating the virus chemically, most often using formaldehyde or β-propiolactone. These approaches are not optimal since they negatively affect the safety of the antigenic determinants of the inactivated particles and require additional purification stages. The most promising platforms for creating vaccines are based on pseudoviruses, i.e., viruses that have completely preserved the outer shell (capsid), while losing the ability to reproduce owing to the destruction of the genome. The irradiation of viruses with electron beam is the optimal way to create pseudoviral particles. In this review, with the example of the poliovirus, the main algorithms that can be applied to characterize pseudoviral particles functionally and structurally in the process of creating a vaccine preparation are presented. These algorithms are, namely, the analysis of the degree of genome destruction and coimmunogenicity. The structure of the poliovirus and methods of its inactivation are considered. Methods for assessing residual infectivity and immunogenicity are proposed for the functional characterization of pseudoviruses. Genome integrity analysis approaches, atomic force and electron microscopy, surface plasmon resonance, and bioelectrochemical methods are crucial to structural characterization of the pseudovirus particles.

Peptide-based direct electrochemical detection of receptor binding domains of SARS-CoV-2 spike protein in pristine samples

RNA isolation and amplification-free user-friendly detection of SARS-CoV-2 is the need of hour especially at resource limited settings. Herein, we devised the peptides of human angiotensin converting enzyme-2 (hACE-2) as bioreceptor at electrode interface for selective targeting of receptor binding domains (RBD) of SARS-CoV-2 spike protein (SP). Disposable carbon-screen printed electrode modified with methylene blue (MB) electroadsorbed graphene oxide (GO) has been constructed as cost-efficient and scalable platform for hACE-2 peptide-based SARS-CoV-2 detection. In silico molecular docking of customized 25 mer peptides with RBD of SARS-CoV-2 SP were validated by AutoDock CrankPep. N-terminal region of ACE-2 showed higher binding affinity of - 20.6 kcal/mol with 15 H-bond, 9 of which were < 3 Å. Electrochemical biosensing of different concentrations of SPs were determined by cyclic voltammetry (CV) and chronoamperometry (CA), enabling a limit of detection (LOD) of 0.58 pg/mL and 0.71 pg/mL, respectively. MB-GO devised hACE-2 peptide platform exert an enhanced current sensitivity of 0.0105 mA/pg mL^-1 cm^-2 (R² = 0.9792) (CV) and 0.45 nA/pg mL^-1 (R² = 0.9570) (CA) against SP in the range of 1 pg/mL to 1 µg/mL. For clinical feasibility, nasopharyngeal and oropharyngeal swab specimens in viral transport medium were directly tested with the prepared peptide biosensor and validated with RT-PCR, promising for point-of-need analysis.

Recent Trends in Metal Nanoparticles Decorated 2D Materials for Electrochemical Biomarker Detection

Technological advancements in the healthcare sector have pushed for improved sensors and devices for disease diagnosis and treatment. Recently, with the discovery of numerous biomarkers for various specific physiological conditions, early disease screening has become a possibility. Biomarkers are the body's early warning systems, which are indicators of a biological state that provides a standardized and precise way of evaluating the progression of disease or infection. Owing to the extremely low concentrations of various biomarkers in bodily fluids, signal amplification strategies have become crucial for the detection of biomarkers. Metal nanoparticles are commonly applied on 2D platforms to anchor antibodies and enhance the signals for electrochemical biomarker detection. In this context, this review will discuss the recent trends and advances in metal nanoparticle decorated 2D materials for electrochemical biomarker detection. The prospects, advantages, and limitations of this strategy also will be discussed in the concluding section of this review.

A sensitive electrochemical method for rapid detection of dengue virus by CRISPR/Cas13a-assisted catalytic hairpin assembly

Dengue fever caused by Dengue virus (DENV) infection has been widely popular, especially in tropical and subtropical areas. Rapid and sensitive diagnosis is the first priority for treatment of DENV infection. This work designed a signal amplification strategy for sensitive electrochemical detection of DENV by using a clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a system for catalytic hairpin assembly on electrode surface. The presence of target RNA could activate the cleavage activity of the CRISPR/Cas13a system to release the blocker silenced swing arms, which then hybridized with hairpin 1 (H1) immobilized on electrode surface to expose the pre-locked toehold domain of H1 for the hybridization of ferrocene-labeled hairpin 2 (H2-Fc). Eventually, a large number of H2-Fc were captured to the electrode to produce amperometric signal for achieving signal amplification. This method showed a linear detection range from 5 fM to 50 nM with a detection limit of 0.78 fM. The proposed assay was successfully used to detect DENV type 1 in total RNA sample extracted, indicating great potential for application in early clinical diagnostic.

Chitosan grafted butein: A metal-free transducer for electrochemical genosensing of exosomal CD24

Metal-free cost-efficient biocompatible molecules are beneficial for opto-electrochemical bioassays. Herein, chitosan (CS) conjugated butein is prepared via graft polymerization. Structural integrity between radical active sites of CS and its probable conjugation routes with reactive OH group of butein during grafting were comprehensively studied using optical absorbance/emission property, NMR, FT-IR and XPS analysis. Fluorescence emission of CS-conjugated butein (CSB) was studied in dried flaky state as well as in drop casted form. Cyclic voltammetric study of CSB modified glassy carbon electrode exhibits 2e^-/2H⁺ transfer reaction in phosphate buffered saline electrolyte following a surface-confined process with a correlation coefficient of 0.99. Unlike pristine butein, CSB modified electrode display a highly reversible redox behavior under various pH ranging from 4 to 9. For the proof-of-concept CSB-modified flexible screen printed electrodes were processed for electrochemical biosensing of exosomal CD24 specific nucleic acid at an ultralow sample concentration, promising for ovarian cancer diagnosis.

Biosensing strategies for the electrochemical detection of viruses and viral diseases - A review

Viruses are the causing agents for many relevant diseases, including influenza, Ebola, HIV/AIDS, and COVID-19. Its rapid replication and high transmissibility can lead to serious consequences not only to the individual but also to collective health, causing deep economic impacts. In this scenario, diagnosis tools are of significant importance, allowing the rapid, precise, and low-cost testing of a substantial number of individuals. Currently, PCR-based techniques are the gold standard for the diagnosis of viral diseases. Although these allow the diagnosis of different illnesses with high precision, they still present significant drawbacks. Their main disadvantages include long periods for obtaining results and the need for specialized professionals and equipment, requiring the tests to be performed in research centers. In this scenario, biosensors have been presented as promising alternatives for the rapid, precise, low-cost, and on-site diagnosis of viral diseases. This critical review article describes the advancements achieved in the last five years regarding electrochemical biosensors for the diagnosis of viral infections. First, genosensors and aptasensors for the detection of virus and the diagnosis of viral diseases are presented in detail regarding probe immobilization approaches, detection methods (label-free and sandwich), and amplification strategies. Following, immunosensors are highlighted, including many different construction strategies such as label-free, sandwich, competitive, and lateral-flow assays. Then, biosensors for the detection of viral-diseases-related biomarkers are presented and discussed, as well as point of care systems and their advantages when compared to traditional techniques. Last, the difficulties of commercializing electrochemical devices are critically discussed in conjunction with future trends such as lab-on-a-chip and flexible sensors.

An Overview on SARS-CoV-2 (COVID-19) and Other Human Coronaviruses and Their Detection Capability via Amplification Assay, Chemical Sensing, Biosensing, Immunosensing, and Clinical Assays

A novel coronavirus of zoonotic origin (SARS-CoV-2) has recently been recognized in patients with acute respiratory disease. COVID-19 causative agent is structurally and genetically similar to SARS and bat SARS-like coronaviruses. The drastic increase in the number of coronavirus and its genome sequence have given us an unprecedented opportunity to perform bioinformatics and genomics analysis on this class of viruses. Clinical tests like PCR and ELISA for rapid detection of this virus are urgently needed for early identification of infected patients. However, these techniques are expensive and not readily available for point-of-care (POC) applications. Currently, lack of any rapid, available, and reliable POC detection method gives rise to the progression of COVID-19 as a horrible global problem. To solve the negative features of clinical investigation, we provide a brief introduction of the general features of coronaviruses and describe various amplification assays, sensing, biosensing, immunosensing, and aptasensing for the determination of various groups of coronaviruses applied as a template for the detection of SARS-CoV-2. All sensing and biosensing techniques developed for the determination of various classes of coronaviruses are useful to recognize the newly immerged coronavirus, i.e., SARS-CoV-2. Also, the introduction of sensing and biosensing methods sheds light on the way of designing a proper screening system to detect the virus at the early stage of infection to tranquilize the speed and vastity of spreading. Among other approaches investigated among molecular approaches and PCR or recognition of viral diseases, LAMP-based methods and LFAs are of great importance for their numerous benefits, which can be helpful to design a universal platform for detection of future emerging pathogenic viruses.

Human virus detection with graphene-based materials

Our recent experience of the COVID-19 pandemic has highlighted the importance of easy-to-use, quick, cheap, sensitive and selective detection of virus pathogens for the efficient monitoring and treatment of virus diseases. Early detection of viruses provides essential information about possible efficient and targeted treatments, prolongs the therapeutic window and hence reduces morbidity. Graphene is a lightweight, chemically stable and conductive material that can be successfully utilized for the detection of various virus strains. The sensitivity and selectivity of graphene can be enhanced by its functionalization or combination with other materials. Introducing suitable functional groups and/or counterparts in the hybrid structure enables tuning of the optical and electrical properties, which is particularly attractive for rapid and easy-to-use virus detection. In this review, we cover all the different types of graphene-based sensors available for virus detection, including, e.g., photoluminescence and colorimetric sensors, and surface plasmon resonance biosensors. Various strategies of electrochemical detection of viruses based on, e.g., DNA hybridization or antigen-antibody interactions, are also discussed. We summarize the current state-of-the-art applications of graphene-based systems for sensing a variety of viruses, e.g., SARS-CoV-2, influenza, dengue fever, hepatitis C virus, HIV, rotavirus and Zika virus. General principles, mechanisms of action, advantages and drawbacks are presented to provide useful information for the further development and construction of advanced virus biosensors. We highlight that the unique and tunable physicochemical properties of graphene-based nanomaterials make them ideal candidates for engineering and miniaturization of biosensors.