Bio-recycling of metals: Recycling of technical products using biological applications

Microbial recovery of rare earth elements from various waste sources: a mini review with emphasis on microalgae

Rare Earth Elements (REEs) are indispensable in contemporary technologies, influencing various aspects of our daily lives and environmental solutions. The escalating demand for REEs has led to increased exploitation, resulting in the generation of diverse REE-bearing solid and liquid wastes. Recognizing the potential of these wastes as secondary sources of REEs, researchers are exploring microbial solutions for their recovery. This mini review provides insights into the utilization of microorganisms, with a particular focus on microalgae, for recovering REEs from sources such as ores, electronic waste, and industrial effluents. The review outlines the principles and distinctions of bioleaching, biosorption, and bioaccumulation, offering a comparative analysis of their potential and limitations. Specific examples of microorganisms demonstrating efficacy in REE recovery are highlighted, accompanied by successful methods, including advanced techniques for enhancing microbial strains to achieve higher REE recovery. Moreover, the review explores the environmental implications of bio-recovery, discussing the potential of these methods to mitigate REE pollution. By emphasizing microalgae as promising biotechnological candidates for REE recovery, this mini review not only presents current advances but also illuminates prospects in sustainable REE resource management and environmental remediation.

Microbial assisted multifaceted amelioration processes of heavy-metal remediation: a clean perspective toward sustainable and greener future

Rapidly increasing heavy metal waste has adversely affected the environment and the Earth's health. The lack of appropriate remediation technologies has worsened the issue globally, especially in developing countries. Heavy-metals contaminants have severely impacted the environment and led to devastating conditions owing to their abundance and reactivity. As they are nondegradable, the potential risk increases even at a low concentration. However, heavy-metal remediation has increased with the up-gradation of technologies and integration of new approaches. Also, of all the treatment methodologies, microbial-assisted multifaceted approach for ameliorating heavy metals is a promising strategy for propagating the idea of a green and sustainable environment with minimal waste aggregation. Microbial remediation combined with different biotechniques could aid in unraveling new methods for eradicating heavy metals. Thus, the present review focuses on various microbial remediation approaches and their affecting factors, enabling recapitulation of the interplay between heavy-metals ions and microorganisms. Additionally, heavy-metals remediation mechanisms adapted by microorganisms, the role of genetically modified (GM) microorganisms, life cycle assessment (LCA), techno-economic assessment (TEA) limitations, and prospects of microbial-assisted amelioration of heavy-metals have been elaborated in the current review with focus toward "sustainable and greener future."

Microbial strategies for copper pollution remediation: Mechanistic insights and recent advances

Environmental contamination is aninsistent concern affecting human health and the ecosystem. Wastewater, containing heavy metals from industrial activities, significantly contributes to escalating water pollution. These metals can bioaccumulate in food chains, posing health risks even at low concentrations. Copper (Cu), an essential micronutrient, becomes toxic at high levels. Activities like mining and fungicide use have led to Copper contamination in soil, water, and sediment beyond safe levels. Copper widely used in industries, demands restraint of heavy metal ion release into wastewater for ecosystem ultrafiltration, membrane filtration, nanofiltration, and reverse osmosis, combat heavy metal pollution, with emphasis on copper.Physical and chemical approaches are efficient, large-scale feasibility may have drawbackssuch as they are costly, result in the production of sludge. In contrast, bioremediation, microbial intervention offers eco-friendly solutions for copper-contaminated soil. Bacteria and fungi facilitate these bioremediation avenues as cost-effective alternatives. This review article emphasizes on physical, chemical, and biological methods for removal of copper from the wastewater as well asdetailing microorganism's mechanisms to mobilize or immobilize copper in wastewater and soil.

Identification of yttrium oxide-specific peptides for future recycling of rare earth elements from electronic scrap

Yttrium is a heavy rare earth element (REE) that acquires remarkable characteristics when it is in oxide form and doped with other REEs. Owing to these characteristics Y2 O3 can be used in the manufacture of several products. However, a supply deficit of this mineral is expected in the coming years, contributing to its price fluctuation. Thus, developing an efficient, cost-effective, and eco-friendly process to recover Y2 O3 from secondary sources has become necessary. In this study, we used phage surface display to screen peptides with high specificity for Y2 O3 particles. After three rounds of enrichment, a phage expressing the peptide TRTGCHVPRCNTLS (DM39) from the random pVIII phage peptide library Cys4 was found to bind specifically to Y2 O3 , being 531.6-fold more efficient than the wild-type phage. The phage DM39 contains two arginines in the polar side chains, which may have contributed to the interaction between the mineral targets. Immunofluorescence assays identified that the peptide's affinity was strong for Y2 O3 and negligible to LaPO4 :Ce3+ ,Tb3+ . The identification of a peptide with high specificity and affinity for Y2 O3 provides a potentially new strategic approach to recycle this type of material from secondary sources, especially from electronic scrap.

Recovery of Residual Lead from Automotive Battery Recycling Slag Using Deep Eutectic Solvents

In this study, we address the ecological challenges posed by automotive battery recycling, a process notorious for its environmental impact due to the buildup of hazardous waste like foundry slag. We propose a relatively cheap and safe solution for lead removal and recovery from samples of this type of slag. The analysis of TCLP extracts revealed non-compliance with international regulations, showing lead concentrations of up to 5.4% primarily in the form of anglesite (PbSO4), as detected by XRF/XRD. We employed deep eutectic solvents (DES) as leaching agents known for their biodegradability and safety in hydrometallurgical processing. Five operational variables were systematically evaluated: sample type, solvent, concentration, temperature, and time. Using a solvent composed of choline chloride and glycerin in a 2:1 molar ratio, we achieved 95% lead dissolution from acidic samples at 90 °C, with agitation at 470 rpm, a pulp concentration of 5%, and a 5 h duration. Furthermore, we successfully recovered 55% of the lead in an optimized solution using an electrowinning cell. This research demonstrates the ability of DES to decontaminate slag, enabling compliance with regulations, the recovery of valuable metals, and new possibilities for the remaining material.

Biosorption of rare earth elements from luminophores by G. sulphuraria (Cyanidiophytina, Rhodophyta)

Lanthanides are indispensable constituents of modern technologies and are often challenging to acquire from natural resources. The demand for REEs is so high that there is a clear need to develop efficient and eco-friendly recycling methods. In the present study, freeze-dried biomass of the polyextremophile Galdieria sulphuraria was employed to recover REEs from spent fluorescent lamps (FL) luminophores by pretreating the freeze-dried biomass with an acid solution to favour ion exchange and enhance the binding sites on the cell surface available for the metal ions. Lanthanides were extracted from the luminophores using sulfuric acid solutions according to standardised procedures, and the effect of biosorbent dosage (0.5-5 mg/ml) and biosorption time (5-60 min) were evaluated. The content of individual REEs in the luminophores and the resulting algal biomass were determined using inductively coupled plasma mass spectrometry (ICP-MS). The most abundant REE in the luminophores was yttrium (287.42 mg/g dm, 91.60% of all REEs), followed by europium (20.98 mg/g, 6.69%); cerium, gadolinium, terbium and lanthanum was in trace. The best biosorption performances were achieved after 5 min and at the lowest biosorbent dosage (0.5 mg/mL). The highest total metal amount corresponded to 41.61 mg/g dried mass, and yttrium was the most adsorbed metal (34.59 mg/g dm, 82.88%), followed by cerium (4.01 mg/g); all other metals were less than 2 mg/g. The rapidity of the biosorption process and the low biosorbent dosage required confirmed this microalga as a promising material for creating an eco-sustainable protocol for recycling REEs.

Recycling technologies, policies, prospects, and challenges for spent batteries

The recycling of spent batteries is an important concern in resource conservation and environmental protection, while it is facing challenges such as insufficient recycling channels, high costs, and technical difficulties. To address these issues, a review of the recycling of spent batteries, emphasizing the importance and potential value of recycling is conducted. Besides, the recycling policies and strategies implemented in representative countries are summarized, providing legal and policy support for the recycling industry. Moreover, a comprehensive classification and comparison of recycling technologies identify the characteristics and current status of different approaches. The integrated recycling technology provides a better recycling performance with zero-pollution recycling of spent battery. Biorecycling technology is expected to gain a broad development prospect in the future owing to the superiority of energy-saving and environmental protection, high recycling efficiency, via microbial degradation, enzymatic degradation, etc. Consequently, as for the existing recycling challenges of waste batteries, developing new recycling technology and perfecting its recycling system is an indispensable guarantee for the sustainable development of waste battery. Meanwhile, theoretical support is offered for the recycling of spent batteries.

Synthetic biology tools for environmental protection

Synthetic biology transforms the way we perceive biological systems. Emerging technologies in this field affect many disciplines of science and engineering. Traditionally, synthetic biology approaches were commonly aimed at developing cost-effective microbial cell factories to produce chemicals from renewable sources. Based on this, the immediate beneficial impact of synthetic biology on the environment came from reducing our oil dependency. However, synthetic biology is starting to play a more direct role in environmental protection. Toxic chemicals released by industries and agriculture endanger the environment, disrupting ecosystem balance and biodiversity loss. This review highlights synthetic biology approaches that can help environmental protection by providing remediation systems capable of sensing and responding to specific pollutants. Remediation strategies based on genetically engineered microbes and plants are discussed. Further, an overview of computational approaches that facilitate the design and application of synthetic biology tools in environmental protection is presented.

Polymeric Inclusion Membranes Based on Ionic Liquids for Selective Separation of Metal Ions

In this work, poly(vinyl chloride)-based polymeric ionic liquid inclusion membranes were used in the selective separation of Fe(III), Zn(II), Cd(II), and Cu(II) from hydrochloride aqueous solutions. The ionic liquids under study were 1-octyl-3-methylimidazolium hexafluorophosphate, [omim+][PF6-] and methyl trioctyl ammonium chloride, [MTOA+][Cl-]. For this purpose, stability studies of different IL/base polymer compositions against aqueous phases were carried out. Among all polymer inclusion membranes studied, [omim+][PF6-]/PVC membranes at a ratio of 30/70 and [MTOA+][Cl-]/PVC membranes at a ratio of 70/30 were able to retain up to 82% and 48% of the weight of the initial ionic liquid, respectively, after being exposed to a solution of metal ions in 1 M HCl for 2048 h (85 days). It was found that polymer inclusion membranes based on the ionic liquid methyl trioctyl ammonium chloride allowed the selective separation of Zn(II)/Cu(II) and Zn(II)/Fe(III) mixtures with separation factors of 1996, 606 and, to a lesser extent but also satisfactorily, Cd(II)/Cu(II) mixtures, with a separation factor of 112. Therefore, selecting the appropriate ionic liquid/base polymer mixture makes it possible to create polymeric inclusion membranes capable of selectively separating target metal ions.

Resource Recycling, Recovery, and Xenobiotic Remediation from E-wastes Through Biofilm Technology: A Review

Around 50 million tonnes of electronic waste has been generated globally per year, causing an environmental hazard and negative effects on human health, such as infertility and thyroid disorders in adults, endocrine and neurological damage in both animals and humans, and impaired mental and physical development in children. Out of that, only 15% is recycled each year and the remaining is disposed of in a landfill, illegally traded or burned, and treated in a sub-standard way. The processes of recycling are challenged by the presence of brominated flame retardants. The different recycling technologies such as the chemical and mechanical methods have been well studied, while the most promising approach is the biological method. The process of utilizing microbes to decontaminate and degrade a wide range of pollutants into harmless products is known as bioremediation and it is an eco-friendly, cost-effective, and sustainable method. The bioremediation process is significantly aided by biofilm communities attached to electronic waste because they promote substrate bioavailability, metabolite transfer, and cell viability, all of which accelerate bioleaching and biodegradation. Microbes existing in biofilm mode relatable to free-floating planktonic cells are advantageous of bioremediation due to their tolerant ability to environmental stress and pollutants through diverse catabolic pathways. This article discusses the harmful effects of electronic waste and its management using biological strategies especially biofilm-forming communities for resource recovery.

Recovery of residual metals from jarosite waste using chemical and biochemical processes to achieve sustainability: A state-of-the-art review

Jarosite is a residue that is generated as a by-product during zinc extraction, and it consists of various types of heavy metal (loid)s such as arsenic, cadmium, chromium, iron, lead, mercury and silver. Due to the huge jarosite turn-over rate, and less efficient and expensive residual metal extraction processes, the zinc-producing industries dispose this waste in landfills. However, the leachate generated from such landfills contains a high concentration of heavy metal (loid)s that could contaminate the nearby water resources and cause environmental concern and human health risk. Various thermo-chemical and biological processes have been developed for the recovery of heavy metals from such waste. In this review, we have discussed all those pyrometallurgical, hydrometallurgical, and biological. Those studies were critically reviewed and compared on the basis of their techno-economic differences. The review indicated that these processes have their own benefits and drawbacks such as overall yield, economic and technical constraints, and the need for more than one process to mobilize multiple metal ions from jarosite. Also, in this review, the residual metal extraction processes from jarosite waste have been linked with the relevant UN Sustainable Development Goals (SDGs), which can be useful for a better approach to sustainable development.

Introducing heterotrophic iron ore bacteria as new candidates in promoting the recovery of e-waste strategic metals

Electrical instruments are an integral part of human life resulting in a vast electronic waste generation (74.7 Mt by 2030), threatening human life and the environment due to its hazardous nature. Therefore, proper e-waste management is a necessity. Currently, bio-metallurgy is a sustainable process and an emerging research field. Simultaneous leaching of metals using two groups of indigenous heterotrophs and autotrophs was an exciting work done in this study. Bioleaching experiments using pre-adapted cultures were investigated at three e-waste densities: 5, 10, and 15 g/L. Statistical analysis was done using two-way ANOVA. Copper (93%), zinc (21.5%), and nickel (10.5%) had the highest recovery efficiencies. There was a significant difference between copper, nickel, tin, and zinc concentrations and the bacterial group (P < 0.05); Iron-oxidizing bacteria showed the most weight decrease and recovered 46-47% of total metals, mainly copper and nickel, while sulfur oxidizers were more capable of zinc leaching. The heterotrophs solubilized tin preferably and substantially decreased e-waste weight. Using heterotrophs alongside autotrophs is proposed to promote metal recovery.

Impacts of metal stress on extracellular microbial products, and potential for selective metal recovery

Harnessing microbial capabilities for metal recovery from secondary waste sources is an eco-friendly and sustainable approach for the management of metal-containing wastes. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) are the two main groups of extracellular compounds produced by microorganisms in response to metal stress that are of great importance for remediation and recovery of metals. These include various high-, and low, molecular weight components, which serve various functional and structural roles. These compounds often contain functional groups with metal binding potential that can attenuate metal stress by sequestering metal ions, making them less bioavailable. Microorganisms can regulate the content and composition of EPS and SMP in response to metal stress in order to increase the compounds specificity and capacity for metal binding. Thus, EPS and SMP represent ideal candidates for developing technologies for selective metal recovery from complex wastes. To discover highly metal-sorptive compounds with specific metal binding affinity for metal recovery applications, it is necessary to investigate the metal binding affinity of these compounds, especially under metal stressed conditions. In this review we critically reviewed microbial EPS and SMP production as a response to metal stress with a particular emphasis on the metal binding properties of these compounds and their role in altering metal bioavailability. Furthermore, for the first time, we compiled the available data on potential application of these compounds for selective metal recovery from waste streams.

Sustainable and Selective Modern Methods of Noble Metal Recycling

Noble metals exhibit broad arrange of applications in industry and several aspects of human life which are becoming more and more prevalent in modern times. Due to their limited sources and constantly and consistently expanding demand, recycling of secondary and waste materials must accompany the traditional mineral extractions. This Minireview covers the most recent solvometallurgical developments in regeneration of Pd, Pt, Rh, Ru, Ir, Os, Ag and Au with emphasis on sustainability and selectivity. Processing-by selective oxidative dissolution, reductive precipitation, solvent extraction, co-precipitation, membrane transfer and trapping to solid media-of eligible multi-metal substrates for recycling from waste printed circuit boards to end-of-life automotive catalysts are discussed. Outlook for possible future direction for noble metal recycling is proposed with emphasis on sustainable approaches.

Galdieria sulphuraria ACUF427 Freeze-Dried Biomass as Novel Biosorbent for Rare Earth Elements

Rare earth elements (REEs) are essential components of modern technologies and are often challenging to acquire from natural resources. The demand for REEs is so high that there is a clear need to develop efficient and environmentally-friendly recycling methods. In the present study, freeze-dried cells of the extremophile Galdieria sulphuraria were employed to recover yttrium, cerium, europium, and terbium from quaternary-metal aqueous solutions. The biosorption capacity of G. sulphuraria freeze-dried algal biomass was tested at different pHs, contact times, and biosorbent dosages. All rare earths were biosorbed in a more efficient way by the lowest dose of biosorbent, at pH 4.5, within 30 min; the highest removal rate of cerium was recorded at acidic pH (2.5) and after a longer contact time, i.e., 360 min. This study confirms the potential of freeze-dried cells of G. sulphuraria as innovative ecological biosorbents in technological applications for sustainable recycling of metals from e-waste and wastewater.

Green Recycling Methods to Treat Lithium-Ion Batteries E-Waste: A Circular Approach to Sustainability

E-waste generated from end-of-life spent lithium-ion batteries (LIBs) is increasing at a rapid rate owing to the increasing consumption of these batteries in portable electronics, electric vehicles, and renewable energy storage worldwide. On the one hand, landfilling and incinerating LIBs e-waste poses environmental and safety concerns owing to their constituent materials. On the other hand, scarcity of metal resources used in manufacturing LIBs and potential value creation through the recovery of these metal resources from spent LIBs has triggered increased interest in recycling spent LIBs from e-waste. State of the art recycling of spent LIBs involving pyrometallurgy and hydrometallurgy processes generates considerable unwanted environmental concerns. Hence, alternative innovative approaches toward the green recycling process of spent LIBs are essential to tackle large volumes of spent LIBs in an environmentally friendly way. Such evolving techniques for spent LIBs recycling based on green approaches, including bioleaching, waste for waste approach, and electrodeposition, are discussed here. Furthermore, the ways to regenerate strategic metals post leaching, efficiently reprocess extracted high-value materials, and reuse them in applications including electrode materials for new LIBs. The concept of "circular economy" is highlighted through closed-loop recycling of spent LIBs achieved through green-sustainable approaches.

Quantification of Peptide-Bound Particles: A Phage Mimicking Approach via Site-Selective Immobilization on Glass

The increasing complexity and need of high-tech materials for modern electronics raise the demand for rare earth elements. While recycling rates are still negligible for most elements, geopolitical tensions, circular economy, and the aim for a carbon-neutral society put pressure on conventional supply strategies and emphasize the need for new ideas for recycling. Our research group works on the development of phage surface display (PSD)-derived peptide-based recycling methods for electronic waste. This study focuses on LaPO4:Ce,Tb (LAP), a component of electronic waste from compact energy-saving lamps containing rare earth element-enriched fluorescent powders. While free solution-phase peptides show little to no interaction with the target material, we re-enabled the binding capability by immobilizing them on various glass supports. We shine a spotlight on the transition from phage-bound to free peptides and present the first proof of successful peptide-LAP particle interactions of previously reported PSD-derived sequences. Therefore, we introduce a method to investigate peptide-particle-interactions qualitatively and quantitatively. Additionally, a calibration curve allowed the quantification of peptide-bound particles. Combined with the quantification of the immobilized peptide on the surface, it was possible to calculate a potential dosage of peptides for future recycling processes.

Spatially resolved Eu(III) environments by chemical microscopy

Chemical microscopy combines high-resolution emission spectra with Abbe-limited spatial resolution and is used for studies of inhomogeneous samples at the (sub-)micronscale. The spatial distinction of multiple Eu(III) coordination sites allows for a comprehensive understanding of environmental samples and highlights the applicability of Eu(III) as a molecular probe in medicine and biology.

A review on the recycling of spent lithium-ion batteries (LIBs) by the bioleaching approach

This review discusses the latest trend in recovering valuable metals from spent lithium-ion batteries (LIBs) to meet the technological world's critical metal demands. Spent LIBs are a secondary source of valuable metals such as Li (5%-7%), Ni (5%-10%), Co (5%-25%), Mn (5-11%), and non-metal graphite. Recycling is essential for the battery industry to extract valuable critical metals from secondary sources to develop new and novel high-tech LIBs for various applications such as eco-friendly technologies, renewable energy, emission-free electric vehicles, and energy-saving lightings. LIB waste is currently undergoing high-temperature pyrometallurgical or hydrometallurgical processes to recover valuable metals, and these processes have proven to be successful and feasible. These methods, however, are not preferable due to the difficulties in controlling the process, secondary waste produced, high operational cost, and high risk of scaling up. Biotechnological approaches can be promising alternatives to pyrometallurgical and hydrometallurgical technologies in metal recovery from LIB waste. Microbiological metal dissolution or bioleaching has gained popularity for metal extraction from ores, concentrates, and recycled or residual materials in recent years. This technology is eco-friendly, safe to handle, and reduces operating costs and energy demands. The pre-treatment process (material preparation), microorganisms used in the bioleaching of LIBs, factors influencing the bioleaching process, methods of enhancing the leaching efficiency, regeneration of electrode materials, and future aspects have been discussed in detail.

High-Gradient Magnetic Separation of Compact Fluorescent Lamp Phosphors: Elucidation of the Removal Dynamics in a Rotary Permanent Magnet Separator

In an ongoing effort towards a more sustainable rare-earth element market, there is a high potential for an efficient recycling of rare-earth elements from end-of-life compact fluorescent lamps by physical separation of the individual phosphors. In this study, we investigate the separation of five fluorescent lamp particles by high-gradient magnetic separation in a rotary permanent magnet separator. We thoroughly characterize the phosphors by ICP-MS, laser diffraction analysis, gas displacement pycnometry, surface area analysis, SQUID-VSM, and Time-Resolved Laser-Induced Fluorescence Spectroscopy. We present a fast and reliable quantification method for mixtures of the investigated phosphors, based on a combination of Time-Resolved Laser-Induced Fluorescence Spectroscopy and parallel factor analysis. With this method, we were able to monitor each phosphors’ removal dynamics in the high-gradient magnetic separator and we estimate that the particles’ removal efficiencies are proportional to (d2·χ)1/3. Finally, we have found that the removed phosphors can readily be recovered easily from the separation cell by backwashing with an intermittent air–water flow. This work should contribute to a better understanding of the phosphors’ separability by high-gradient magnetic separation and can simultaneously be considered to be an important preparation for an upscalable separation process with (bio)functionalized superparamagnetic carriers.

Response and Dynamic Change of Microbial Community during Bioremediation of Uranium Tailings by Bacillus sp

Bacillus sp. is widely used in the remediation of uranium-contaminated sites. However, little is known about the competitive process of microbial community in the environment during bioremediation. The bioremediation of uranium tailings using Bacillus sp. was explored, and the bacterial community was analyzed by high-throughput sequencing at different stages of remediation. Bacillus sp. reduced the leaching of uranium from uranium tailings. The lowest uranium concentration was 17.25 μg/L. Alpha diversity revealed that the abundance and diversity of microorganisms increased with the extension of the culture time. The microbial abundance and diversity were higher in the treatment group than in the control group. The dominant species at the phyla level were Firmicutes and Proteobacteria in the uranium tailings environment, whereas the phylum of Proteobacteria was significantly increased in the treatment group. Based on the genus level, the proportions of Arthrobacter, Rhodococcus and Paenarthrobacter decreased significantly, whereas those of Clostridium sp., Bacillus and Pseudomonas increased dramatically. Hence, the remediation of uranium contamination in the environment was due to the functional microorganisms, which gradually became the dominant strain in the treatment, such as Desulfotomaculum, Desulfosporporosinus, Anaerocolumna, Ruminiclostridium and Burkholderia. These findings provided a promising outlook of the potential for remediation strategies of soil contaminated by uranium. The dynamic characteristics of the microbial community are likely to provide a foundation for the bioremediation process in practice.

A mini-review of heavy metal recycling technologies for municipal solid waste incineration fly ash

This mini-review article summarizes the available technologies for the recycling of heavy metals (HMs) in municipal solid waste incineration (MSWI) fly ash (FA). Recovery technologies included thermal separation (TS), chemical extraction (CE), bioleaching, and electrochemical processes. The reaction conditions of various methods, the efficiency of recovering HMs from MSWI FA and the difficulties and solutions in the process of technical development were studied. Evaluation of each process has also been done to determine the best HM recycling method and future challenges. Results showed that while bioleaching had minimal environmental impact, the process was time-consuming. TS and CE were the most mature technologies, but the former process was not cost-effective. Overall, it has the greatest economic potential to recover metals by CE with scrubber liquid produced by a wet air pollution control system. An electrochemical process or solvent extraction could then be applied to recover HMs from the enriched leachate. Ongoing development of TS and bioleaching technologies could reduce the treatment cost or time.

Lithium bioleaching: An emerging approach for the recovery of Li from spent lithium ion batteries

The rapidly growing demand for lithium has resulted in a sharp increase in its price. This is due to the ubiquitous use of lithium-ion batteries (LIBs) in large-scale energy and transportation sectors as well as portable devices. Recycling of the LIBs for being the supply of critical metals hence becomes environmentally and economically viable. The presently used approaches for the recovery of spent LIBs like pyrometallurgical process can effectively recover nickel, cobalt, and copper, while lithium is usually lost in slag. Bioleaching process as an alternative method of extraction and recovery of valuable metals from the primary and secondary resources has been attracting a large pool of attraction. This method can provide higher recovery yield even for low concentration of metals which makes it viable among conventional methods. The bioleaching process can work with lower operating cost and consumed water and energy along with a simple condition, which produces less hazardous by-products ultimately. Here, we comprehensively review the biological and chemical mechanisms of the bioleaching process with a conclusive discussion to help how to extend the use of bioleaching for lithium extraction and recovery from the spent LIBs with a focus on recovery yields improvement. We elaborate on the three main types of the reported bioleaching with considering effective parameters including temperature, initial pH, pulp density, aeration, and medium and cell nutrients to sustain microorganism activity. Finally, practical challenges and future opportunities of lithium are discussed to inspire future research trends and pilot studies to realize the full potential of lithium recovery using sustainable bioleaching processes to extend a clean energy future.

Extraction of valuable metals from discarded AMOLED displays in smartphones using Bacillus foraminis as an alkali-tolerant strain

With the alarming rate of e-waste generation, resource recovery from secondary metal sources is essential for sustainable resource utilization and to prevent the release of potentially toxic elements into the environment. In the current study, the first-time extraction of Ag, Mo, and Cu from active-matrix organic light-emitting diode (AMOLED) screens of discarded smartphones have been achieved using organic acids produced by Bacillus foraminis cultured on a modified Horikoshi medium. The influences of initial pH, inoculation size, and pulp density on the bioleaching process were evaluated over six-day experiment. Maximum extraction of Ag, Mo, and Cu (100, 56.8, and 41.4%) at optimal values of three investigated factors was obtained over a 12-day bioleaching experiment. A diverse assemblage of organic acid was produced in the optimized bioleaching condition, including tartaric (12.1 mM), formic (49.8 mM), acetic (21.5 mM), lactic (78.5 mM), citric (2.7 mM), and propionic (69.6 mM) acid. The contact angle analysis highlighted more hydrophobicity of powder after the bioleaching. FTIR and CHNO data also confirmed the role of bioleaching in the powder wettability alteration. The sequential extraction method revealed high mobility of In, Fe, Co, Cu, Cr, and Mo and low mobility of Ag. The results exhibited high tolerance of alkali-tolerant bacteria to potentially toxic elements and its superior performance in the bioleaching of discarded mobile screens at high pulp density.

Gallium-binding peptides as a tool for the sustainable treatment of industrial waste streams

Here we provide a proof of principle for an application-oriented concept for the peptide-based recovery of gallium in industrial wastewater, which was supported by biosorption studies with a real wastewater sample. We investigated the interaction of the gallium-binding peptides TMHHAAIAHPPH, NYLPHQSSSPSR, SQALSTSRQDLR, HTQHIQSDDHLA, and NDLQRHRLTAGP with gallium and arsenic through different experimental and computational approaches. Data obtained from isothermal titration microcalorimetry indicated a competitive influence by the presence of acetate ions with an exothermic contribution to the otherwise endothermic peptide gallium interactions. For peptide HTQHIQSDDHLA, a stabilizing influence of acetate ions on the metal peptide interaction was found. Peptide NYLPHQSSSPSR showed the highest affinity for gallium in ITC studies. Computational modeling of peptide NYLPHQSSSPSR was used to determine interaction parameters and to explain a possible binding mechanism. Furthermore, the peptides were immobilized on polystyrene beads. Thus, we created a novel and exceptionally robust peptide-based material for the biosorption of gallium from an aqueous solution. Data obtained from isothermal titration microcalorimetry indicated a competitive influence by the presence of acetate ions with an exothermic contribution to the otherwise endothermic peptide gallium interactions. For peptide HTQHIQSDDHLA, a stabilizing influence of acetate ions on the metal peptide interaction was found. Peptide NYLPHQSSSPSR showed the highest affinity for gallium in ITC studies. Computational modeling of peptide NYLPHQSSSPSR was used to determine interaction parameters and to explain a possible binding mechanism. Furthermore, the peptides were immobilized on polystyrene beads. Thus, we created a novel and exceptionally robust peptide-based material for the biosorption of gallium from an aqueous solution.

Extraction of Valuable Elements from Red Mud with a Focus on Using Liquid Media—A Review

Bauxite residue, known as red mud, is a by-product of alumina production using the Bayer process. Currently, its total global storage amounts to over 4.6 billion tons, including about 600 million tons in Russia. The total global storage of red mud occupies large areas, leading to environmental damage and increasing environmental risks. Moreover, it contains a significant amount of sodium, which is easily soluble in subsoil water; therefore, a sustainable approach for comprehensive recycling of red mud is necessary. The bauxite residue contains valuable elements, such as aluminum, titanium, and scandium, which can be recovered using liquid media. In recent years, many methods of recovery of these elements from this waste have been proposed. This paper provides a critical review of hydrometallurgical, solvometallurgical, and complex methods for the recovery of valuable components from red mud, namely, aluminum, titanium, sodium, and rare and rare-earth elements. These methods include leaching using alkaline or acid solutions, ionic liquids, and biological organisms, in addition to red mud leaching solutions by extraction and sorption methods. Advantages and disadvantages of these processes in terms of their environmental impact are discussed.

Synthetic biology approaches to copper remediation: bioleaching, accumulation and recycling

One of the current aims of synthetic biology is the development of novel microorganisms that can mine economically important elements from the environment or remediate toxic waste compounds. Copper, in particular, is a high-priority target for bioremediation owing to its extensive use in the food, metal and electronic industries and its resulting common presence as an environmental pollutant. Even though microbe-aided copper biomining is a mature technology, its application to waste treatment and remediation of contaminated sites still requires further research and development. Crucially, any engineered copper-remediating chassis must survive in copper-rich environments and adapt to copper toxicity; they also require bespoke adaptations to specifically extract copper and safely accumulate it as a human-recoverable deposit to enable biorecycling. Here, we review current strategies in copper bioremediation, biomining and biorecycling, as well as strategies that extant bacteria use to enhance copper tolerance, accumulation and mineralization in the native environment. By describing the existing toolbox of copper homeostasis proteins from naturally occurring bacteria, we show how these modular systems can be exploited through synthetic biology to enhance the properties of engineered microbes for biotechnological copper recovery applications.

Investigation of the structure and dynamics of gallium binding to high-affinity peptides elucidated by multi-scale simulation, quantum chemistry, NMR and ITC

Gallium (as Ga³⁺) is a Group IIIa metal and its recovery from wastewaters has become increasingly important for its reuse. The use of peptides for recycling offers a low-cost and environmentally-friendly option but the structural characteristics of peptides likely to bind Ga³⁺ are largely unknown. Multiple computational methods, coupled with experimental verification via NMR and Isothermal Calorimetry (ITC), were used to establish that Ga³⁺ binds with high affinity to peptide sequences and to elucidate the structural characteristics that contributed. It was demonstrated that peptide pre-organisation is key to Ga³⁺ binding and that a favourable binding position is necessarily governed by the size and shape of the electrostatic environment as much as individual electrostatic interactions with peptide residues themselves. Given favourable conditions, Ga³⁺ retrieved plausible binding positions involving both charged and uncharged residues that greatly increases the range of bonding possibilities with other peptide sequences and offers insights for binding other metals. The addition of pH buffer substantially improved the affinity of Ga³⁺ and a structural role for a buffer component was demonstrated.

Insights into palladium nanoparticles produced by Shewanella oneidensis MR-1: Roles of NADH dehydrogenases and hydrogenases

Biologically synthesized palladium nanoparticles (bio-Pd) have attracted considerable interest as promising green catalysts for environmental remediation. However, the mechanisms by which microorganisms produce bio-Pd remain unclear. In the present study, we investigated the roles of Shewanella oneidensis MR-1 and its NADH dehydrogenases and hydrogenases (HydA and HyaB) in bio-Pd production using formate as the electron donor. The roles of NADH dehydrogenases and hydrogenases were studied by inhibiting NADH dehydrogenases and using hydrogenase mutants (ΔhydA, ΔhyaB, and ΔhydAΔhyaB), respectively. The results showed ~97% reduction of palladium by S. oneidensis MR-1 after 24 h using 250 μM palladium and 500 μM formate. Electron microscopy images showed the presence of bio-Pd on both the outer and cytoplasmic membranes of S. oneidensis MR-1. However, the inhibition of NADH dehydrogenases in S. oneidensis MR-1 resulted in only ~61% reduction of palladium after 24 h, and bio-Pd were not found on the outer membrane. The mutants lacking one or two hydrogenases removed 91-96% of palladium ions after 24 h and showed more cytoplasmic bio-Pd but less periplasmic bio-Pd. To the best of our knowledge, this is the first study to demonstrate the role of NADH dehydrogenases of S. oneidensis MR-1 in the formation of bio-Pd on the outer membrane. It also demonstrates that the hydrogenases (especially HyaB) of S. oneidensis MR-1 contribute to the formation of bio-Pd in the periplasmic space. This study provides mechanistic insights into the production of biogenic metal nanoparticles towards their possible use in industrial and environmental applications.

Metallurgical processes unveil the unexplored "sleeping mines" e- waste: a review

The aim of this review paper is to critically analyze the existing studies on waste electric and electronic equipment (WEEE), which is one of the most increasing solid waste streams. This complex solid waste stream has pushed many scientific communities to develop novel technologies with minimum ecological disturbance. Noteworthy amount of valuable metals makes e-waste to a core of "urban mining"; therefore, it warrants special attention. Present study is focused on all the basic conceptual knowledge of WEEE ranging from compositional analysis, global statistics of e-waste generation, and metallurgical processes applied for metals extraction from e-waste. This review critically analyses the existing studies to emphasize on the heterogeneity nature of e-waste, which has not been focused much in any of the existing review articles. Comprehensive analysis of conventional approaches such as pyrometallurgy and hydrometallurgy reveals that high costs and secondary pollution possibilities limit the industrial feasibilities of these processes. Therefore biohydrometallurgy, a green technology, has been attracting researchers to focus on this novel technique to implement it for metal extraction from WEEE.

Comparison of Three Approaches for Bioleaching of Rare Earth Elements from Bauxite

Approximately 300 million tonnes of bauxite are processed annually, primarily to extract alumina, and can contain moderate rare earth element (REE) concentrations, which are critical to a green energy future. Three bioleaching techniques (organic acid, reductive and oxidative) were tested on three karst bauxites using either Aspergillus sp. (organic acid bioleaching) or Acidithiobacillus ferrooxidans (reductive and oxidative bioleaching). Recovery was highest in relation to middle REE (generally Nd to Gd), with maximum recovery of individual REE between 26.2% and 62.8%, depending on the bauxite sample. REE recovery occurred at low pH (generally < 3), as a result of organic acids produced by Aspergillus sp. or sulphuric acid present in A. ferrooxidans growth media. Acid production was seen when A. ferrooxidans was present. However, a clear increase in REE recovery in the presence of A. ferrooxidans (compared to the control) was only seen with one bauxite sample (clay-rich) and only under oxidative conditions. The complex and varied nature of REE-bearing minerals in bauxite provides multiple targets for bioleaching, and although the majority of recoverable REE can be leached by organic and inorganic acids, there is potential for enhanced recovery by bioleaching.

Bioleaching for resource recovery from low-grade wastes like fly and bottom ashes from municipal incinerators: A SWOT analysis

Bioleaching (or microbial leaching) is a biohydrometallurgical technology that can be applied for metal recovery from anthropogenic waste streams. In particular, fly ashes and bottom ashes of municipal solid waste incineration (MSWI) can be used as a target material for biomining. Globally, approximately 46 million tonnes of MSWI ashes are produced annually. Currently landfilled or used as aggregate, these contain large amounts of marketable metals, equivalent to low-grade ores. There is opportunity to recover critical materials as the circular economy demands, using mesophile, moderately thermophile, and extremophile microorganisms for bioleaching. A Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis was developed to assess the potential of this biotechnology to recover critical metals from MSWI wastes. Bioleaching has potential as a sustainable technology for resource recovery and enhanced waste management. However, stakeholders can only reap the full benefits of bioleaching by addressing both the technical engineering challenges and regulatory requirements needed to realise and integrated approach to resource use.

Potential of Bioremediation and PGP Traits in Streptomyces as Strategies for Bio-Reclamation of Salt-Affected Soils for Agriculture

Environmental limitations influence food production and distribution, adding up to global problems like world hunger. Conditions caused by climate change require global efforts to be improved, but others like soil degradation demand local management. For many years, saline soils were not a problem; indeed, natural salinity shaped different biomes around the world. However, overall saline soils present adverse conditions for plant growth, which then translate into limitations for agriculture. Shortage on the surface of productive land, either due to depletion of arable land or to soil degradation, represents a threat to the growing worldwide population. Hence, the need to use degraded land leads scientists to think of recovery alternatives. In the case of salt-affected soils (naturally occurring or human-made), which are traditionally washed or amended with calcium salts, bio-reclamation via microbiome presents itself as an innovative and environmentally friendly option. Due to their low pathogenicity, endurance to adverse environmental conditions, and production of a wide variety of secondary metabolic compounds, members of the genus Streptomyces are good candidates for bio-reclamation of salt-affected soils. Thus, plant growth promotion and soil bioremediation strategies combine to overcome biotic and abiotic stressors, providing green management options for agriculture in the near future.

Recent advances in the recovery of metals from waste through biological processes

Wastes containing critical metals are generated in various fields, such as energy and computer manufacturing. Metal-bearing wastes are considered as secondary sources of critical metals. The conventional physicochemical methods of metals recovery are energy-intensive and cause further pollution. Low-cost and eco-friendly technologies including biosorbents, bioelectrochemical systems (BESs), bioleaching, and biomineralization, have become alternatives in the recovery of critical metals. However, a relatively low recovery rate and selectivity severely hinder their large-scale applications. Researchers have expanded their focus to exploit novel strain resources and strategies to improve the biorecovery efficiency. The mechanisms and potential applicability of modified biological techniques for improving the recovery of critical metals need more attention. Hence, this review summarize and compare the strategies that have been developed for critical metals recovery, and provides useful insights for energy-efficient recovery of critical metals in future industrial applications.

Prospective (Bio)leaching of Historical Copper Slags as an Alternative to Their Disposal

The aim of this study was to evaluate the feasibility of (bio)hydrometallurgical methods for metal extraction from historical copper slags. Two types of slags (amorphous slag—AS, and crystalline slag—CS) were subjected to 24 to 48 h of leaching with: (i) Sulfuric acid at 0.1, 0.5, and 1 M concentrations at 1%, 5%, and 10% pulp densities (PDs); and (ii) normality equivalent (2 N) acids (sulfuric, hydrochloric, nitric, citric, and oxalic) at pulp densities ranging from 1% to 2%. Bioleaching experiments were performed within 21 days with Acidithiobacillus thiooxidans accompanied by an abiotic control (sterile growth medium). The results demonstrated that the most efficient treatment for amorphous and crystalline slag was bioleaching at 1% PD over 21 days, which led to extraction of Cu at rates of 98.7% and 52.1% for AS and CS, respectively. Among the chemical agents, hydrochloric acid was the most efficient and enabled 30.5% of Cu to be extracted from CS (1% PD, 48 h) and 98.8% of Cu to be extracted from AS (1% PD, 24 h). Slag residues after leaching were characterized by strong alteration features demonstrated by the complete dissolution of fayalite in the case of CS and the transformation of AS to amorphous silica and secondary gypsum. Based on this study, we conclude that amorphous slag is a more suitable candidate for potential metal recovery because of its generally high susceptibility to leaching and due to the generation of residue significantly depleted in metals as the end product. The inventory of economically relevant metals showed that 1 ton of historical copper slag contains metals valued at $47 and $135 for crystalline and amorphous slag, respectively, suggesting that secondary processing of such materials can potentially be both economically and environmentally viable.

Quantifying indium with ion chromatography in hydro- and biohydrometallurgical leaching solutions

A methodology has been developed to chromatographically quantify indium in polymetallic (bio)hydrometallurgical processing solutions using the Dionex IonPac CS5A column and pyridine-2,6-dicarboxylic acid eluent. Cu(II) and In(III) could be separated by elevating the column temperature to 45°C. The comparatively low stability constant of the In-eluent complex (log K₂  = 3.8) required typical leaching samples to be diluted in the eluent rather than acid or water to overcome ligand competition between components of the sample solution and the eluent. The methodology was applied to leachates from (bio)hydrometallurgical processing of oxidic flue dust residues and sulfidic zinc ores, where both are promising candidates for the recovery of indium from low grade ores and metallurgical wastes. Indium, ferrous iron, ferric iron, copper, zinc, nickel, and manganese concentrations could be simultaneously quantified. The method was found suitable for samples containing at least 0.25 mg/L indium and an iron to indium ratio of up to 100:1.

Essential Role of σ Factor RpoF in Flagellar Biosynthesis and Flagella-Mediated Motility of Acidithiobacillus caldus

Acidithiobacillaceae, an important family of acidophilic and chemoautotrophic sulfur or iron oxidizers, participate in geobiochemical circulation of the elements and drive the release of heavy metals in mining associated habitats. Because of their environmental adaptability and energy metabolic systems, Acidithiobacillus spp. have become the dominant bacteria used in bioleaching for heavy metal recovery. Flagella-driven motility is associated with bacterial chemotaxis and bacterial responses to environmental stimuli. However, little is known about how the flagellum of Acidithiobacillus spp. is regulated and how the flagellum affects the growth of these chemoautotrophic bacteria. In this study, we analyzed the flagellar gene clusters in Acidithiobacillus strains and uncovered the close relationship between flagella and the sulfur-oxidizing systems (Sox system). The σ²⁸ gene (rpoF) knockout and overexpression strains of Acidithiobacillus caldus were constructed. Scanning electron microscopy shows that A. caldus ΔrpoF cells lacked flagella, indicating the essential role of RpoF in regulating flagella synthesis in these chemoautotrophic bacteria. Motility analysis suggests that the deletion of rpoF resulted in the reduction of swarming capability, while this capability was enhanced in the rpoF overexpression strain. Both static cultivation and low concentration of energy substrates (elemental sulfur or tetrathionate) led to weak growth of A. caldus ΔrpoF cells. The deletion of rpoF promoted bacterial attachment to the surface of elemental sulfur in static cultivation. The absence of RpoF caused an obvious change in transcription profile, including genes in flagellar cluster and those involved in biofilm formation. These results provide an understanding on the regulation of flagellar hierarchy and the flagellar function in these sulfur or iron oxidizers.

Directed Evolution and Engineering of Gallium-Binding Phage Clones-A Preliminary Study

The phage surface display technology is a useful tool to screen and to extend the spectrum of metal-binding protein structures provided by nature. The directed evolution approach allows identifying specific peptide ligands for metals that are less abundant in the biosphere. Such peptides are attractive molecules in resource technology. For example, gallium-binding peptides could be applied to recover gallium from low concentrated industrial wastewater. In this study, we investigated the affinity and selectivity of five bacteriophage clones displaying different gallium-binding peptides towards gallium and arsenic in independent biosorption experiments. The displayed peptides were highly selective towards Ga³⁺ whereby long linear peptides showed a lower affinity and specificity than those with a more rigid structure. Cysteine scanning was performed to determine the relationship between secondary peptide structure and gallium sorption. By site-directed mutagenesis, the amino acids of a preselected peptide sequence are systematically replaced by cysteines. The resulting disulphide bridge considerably reduces the flexibility of linear peptides. Subsequent biosorption experiments carried out with the mutants obtained from cysteine scanning demonstrated, depending on the position of the cysteines in the peptide, either a considerable increase in the affinity of gallium compared to arsenic or an increase in the affinity for arsenic compared to gallium. This study shows the impressive effect on peptide–target interaction based on peptide structure and amino acid position and composition via the newly established systematic cysteine scanning approach.

Chromatopanning for the identification of gallium binding peptides

This study is concerned with a chromatography-based approach (Immobilized Metal Ion Affinity Chromatography) for the recovery of gallium binding peptide sequences from a recombinant phage display library. The here described methods apply the fundamental knowledge and methods of separation science and meet thereby the key requirement of the phage display technique of precise separation of target-binding bacteriophage clones from non-interacting bacteriophage during the biopanning. During the chromatopanning called process, a total of 101 bacteriophage clones were identified of which in subsequent binding experiments, phage clones expressing the peptide sequences TMHHAAIAHPPH, SQALSTSRQDLR and HTQHIQSDDHLA were characterized to bind >10 fold better to a target that presents immobilized gallium ions than control phage, displaying no peptide sequence. The performance of biopanning experiments in chromatographic systems is particularly suitable for demanding targets such as trivalent metal ions. We found, that the selection process benefits immensely from the stable immobilization of the target metal ions during the entire biopanning process as well as the complete recovery of well interacting bacteriophage clones. Among others, this was possible due to an enhanced monitoring of process conditions and fractionation of eluates.

Bio-mining of Lanthanides from Red Mud by Green Microalgae

Red mud is a by-product of alumina production containing lanthanides. Growth of green microalgae on red mud and the intracellular accumulation of lanthanides was tested. The best growing species was Desmodesmus quadricauda (2.71 cell number doublings/day), which accumulated lanthanides to the highest level (27.3 mg/kg/day), if compared with Chlamydomonas reinhardtii and Parachlorella kessleri (2.50, 2.37 cell number doublings and 24.5, 12.5 mg/kg per day, respectively). With increasing concentrations of red mud, the growth rate decreased (2.71, 2.62, 2.43 cell number doublings/day) due to increased shadowing of cells by undissolved red mud particles. The accumulated lanthanide content, however, increased in the most efficient alga Desmodesmus quadricauda within 2 days from zero in red-mud free culture to 12.4, 39.0, 54.5 mg/kg of dry mass at red mud concentrations of 0.03, 0.05 and 0.1%, respectively. Red mud alleviated the metal starvation caused by cultivation in incomplete nutrient medium without added microelements. Moreover, the proportion of lanthanides in algae grown in red mud were about 250, 138, 117% higher than in culture grown in complete nutrient medium at red mud concentrations of 0.03, 0.05, 0.1%. Thus, green algae are prospective vehicles for bio-mining or bio-leaching of lanthanides from red mud.

Bioleaching of valuable and hazardous metals from dry discharged incineration slag. An approach for metal recycling and pollutant elimination

Recycling of process wastes will be in future an essential step to meet the demands for valuable metals of a growing market. Depending on their particle sizes incineration slags are already used to recover metals but particle size fractions below 4 mm are still difficult to recycle. Therefore, different particle size fractions (mesh size 2 and 4 mm, high energy grinded) of dry discharged slags were used for bioleaching with and without the pure cultures Acidithiobacillus ferrooxidans or Leptospirillum ferrooxidans or a mixture of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans in batch cultures. Regarding Al, Cr, Cu, Ni, Mn and the rare earth elements Ce, La and Er, bioleaching was significantly more successful with iron oxidizing bacteria compared to abiotic controls. Metal mobilization for Al, Cu, Mn, Cr and Er with bacteria was between 70 and 100% and for Ce, Ni and La around 50% almost after 7 days, making an industrial application for the high concentrated metals like Al and Cu feasible. In addition to the recovery of valuable metals, a reduction in cost of landfilling was identified. After treatment of the slag with the microorganisms, concentrations of harmful substances in the residues could be reduced and thus a classification in lower safety levels regarding the LAGA or EU regulations was calculated.

Perspectives regarding the use of metallurgical slags as secondary metal resources - A review of bioleaching approaches

Smelting activity by its very nature produces large amounts of metal-bearing waste, often called metallurgical slag(s). In the past, industry used to dispose of these waste products at dumping sites without the appropriate environmental oversight. Once there, ongoing biogeochemical processes affect the stability of the slags and cause the release of metallic contaminants. Rather than viewing metallurgical slags as waste, however, such deposits should be viewed as secondary metal resources. Metal bioleaching is a "green" treatment route for metallurgical slags, currently being studied under laboratory conditions. Metal-laden leachates obtained at the bioleaching stage have to be subjected to further recovery operations in order to obtain metal(s) of interest to achieve the highest levels of purity possible. This perspective paper considers the feasibility of the reuse of base-metal slags as secondary metal resources. Special focus is given to current laboratory bioleaching approaches and associated processing obstacles. Further directions of research for development of more efficient methods for waste slag treatment are also highlighted. The optimized procedure for slag treatment is defined as the result of this review and should include following steps: i) slag characterization (chemical and phase composition and buffering capacity) following the choice of initial pH, ii) the choice of particle size, iii) the choice of the liquid-to-solid ratio, iv) the choice of microorganisms, v) the choice of optimal nutrient supply (growth medium composition). An optimal combination of all these parameters will lead to efficient extraction and generation of metal-free solid residue.