Chitosan stabilizes platelet growth factors and modulates stem cell differentiation toward tissue regeneration

Tendon-Bone Healing: Synergistic Role of Platelets and Mesenchymal Stem Cells in Tissue Engineering

Repair of the tendon-bone interface (TBI) remains a significant clinical challenge due to its complex biomechanical environment and hierarchical structure. Conventional surgical approaches often fail to fully reestablish native tissue architecture and function. In recent years, tissue engineering strategies have increasingly emphasized the application of mesenchymal stem cells (MSCs) and platelet-derived products to promote regeneration. MSCs possess multilineage differentiation potential and immunomodulatory capabilities, making them attractive candidates for TBI repair. Platelets, through their rich secretome, orchestrate essential regenerative processes such as cell recruitment, angiogenesis, and immune modulation. This review explores the molecular crosstalk between MSCs and platelets, critically examines current approaches utilizing platelet-rich plasma (PRP)-MSC combinations and platelet-derived exosome therapies and underscores the urgent need for standardization to optimize therapeutic outcomes in PRP-MSC-based regenerative strategies.

Research progress on intervertebral disc repair strategies and mechanisms based on hydrogel

Intervertebral disc degeneration (IDD) arises from a complex interplay of genetic, environmental, and age-related factors, culminating in a spectrum of low back pain (LBP) disorders that exert significant societal and economic impact. The present therapeutic landscape for IDD poses formidable clinical hurdles, necessitating the exploration of innovative treatment modalities. The hydrogel, as a biomaterial, exhibits superior biocompatibility compared to other biomaterials such as bioceramics and bio-metal materials. It also demonstrates mechanical properties closer to those of natural intervertebral discs (IVDs) and favorable biodegradability conducive to IVD regeneration. Therefore, it has emerged as a promising candidate material in the field of regenerative medicine and tissue engineering for treating IDD. Hydrogels have made significant strides in the field of IDD treatment. Particularly, injectable hydrogels not only provide mechanical support but also enable controlled release of bioactive molecules, playing a crucial role in mitigating inflammation and promoting extracellular matrix (ECM) regeneration. Furthermore, the ability of injectable hydrogels to achieve minimally invasive implantation helps minimize tissue damage. This article initially provides a concise exposition of the structure and function of IVD, the progression of IDD, and delineates extant clinical interventions for IDD. Subsequently, it categorizes hydrogels, encapsulates recent advancements in biomaterials and cellular therapies, and delves into the mechanisms through which hydrogels foster disc regeneration. Ultimately, the article deliberates on the prospects and challenges attendant to hydrogel therapy for IDD.

Nanoencapsulation, biocompatibility and antibiofilm properties of chitosan/nisin Z spheres

OBJECTIVES

To study antibiofilm formation properties and biocompatibility of nisin Z for oral applications by encapsulating it in a highly muco-adhesive chitosan nanosphere and testing its effects against a multispecies biofilm and in vitro wound healing assay.

MATERIALS AND METHODS

Nisin Z was encapsulated in chitosan. Encapsulation parameters were evaluated using dynamic light scattering and visualised with microscopy. The effects on biofilm growth were tested using a Calgary biofilm device against a five species biofilm model. The effects on human gingival fibroblast (HGF) growth and migration were examined using an Idibi (500 nm gap) migration assay and the percentage of gap closure measured using ImageJ.

RESULTS

20,000 IU/ml (0.525 mg/ml production concentration) nisin Z in a 1:40 ratio of TPP:chitosan produced optimal nanospheres with a low polydispersity index of 0.498 and average size of 264.8 nm. The freeze-dried nanospheres have a dose-dependent effect on biofilm formation, significantly reducing biofilm attachment compared to the positive control. No colonies were observed for chitosan/nisin Z nanospheres at > 6.25 mg/ml. HGFs in the control and 1000 IU nisin Z (unencapsulated) groups showed the most gap closure. The treatment group containing 50 mg/ml chitosan/nisin Z nanospheres showed gap closure comparable to the control.

CONCLUSIONS

Chitosan/nisin Z nanospheres were produced with antibiofilm activity with > 6.25 mg/ml nanospheres, while up to 50 mg/ml had no significant effect on HGF gap closure in vitro. Thus, nanoencapsulated nisin Z has potential as a therapeutic agent for the treatment of periodontitis.

The Role of Intermediate Water in Enhancing Blood and Cellular Compatibility of Chitosan-Based Biomaterials

Tissue engineering and regenerative medicine require biomaterials that balance blood compatibility with cell adhesion, proliferation, and differentiation. Chitosan and its derivatives, owing to their biocompatibility, biodegradability, and functional versatility, have been extensively explored for biomedical applications, including vascular grafts and tissue engineering scaffolds. This study investigates the effect of chemical modifications on the water state of chitosan derivatives─specifically, free water (FW), intermediate water (IW), and nonfreezing water (NFW)─and their implications for protein interactions, platelet adhesion, and mesenchymal stem cell (MSC) behavior. By incorporating hydrophilic and hydrophobic groups, the hydration of chitosan derivatives was precisely controlled, which significantly influenced blood compatibility and cell adhesion. Hexanoyl glycol chitosan (HGC) demonstrated reduced platelet adhesion, low fibrinogen denaturation, and favorable MSC adhesion, making it a promising candidate for applications requiring both enhanced blood compatibility and regenerative potential. These findings underscore the importance of hydration water modulation in designing advanced biomaterials for blood-contacting and regenerative medicine applications.

Photothermally Responsive Hydrogel Releases Basic Fibroblast Growth Factor to Promote the Healing of Infected Wounds

The treatment of infected wounds is often complicated by bacterial infection and impaired scar healing. Antibiotics and growth factors are typically utilized to address these clinical challenges and expedite wound healing. However, the use of hydrogels containing these therapeutic agents is often restricted to complex cases and increases treatment costs considerably. In this study, we developed a quaternized-chitosan-based hybrid hydrogel dressing (SQFB) with intrinsic antibacterial properties to address these limitations. The hybrid hydrogel contained interpenetrating polymer networks of basic fibroblast growth factor and black phosphorus nanosheets, facilitating a photothermal response that triggers the release of basic fibroblast growth factor upon near-infrared irradiation. In vitro experiments demonstrated that SQFB exhibits superior antibacterial, hemostatic, enhanced cell proliferation, and angiogenesis functions. Importantly, the results showed that SQFB can promote the healing of infected wounds by accelerating all 4 stages of wound repair while preventing scarring formation. RNA sequencing analysis revealed that combined treatment with SQFB and near-infrared irradiation can effectively modulate genes primarily associated with epithelial regeneration pathways and metabolic processes. Collectively, our findings suggest that this hybrid hydrogel holds great promise for the effective management of infected wounds.

Signaling Pathways Driving MSC Osteogenesis: Mechanisms, Regulation, and Translational Applications

Mesenchymal stem cells (MSCs) are crucial for skeletal development, homeostasis, and repair, primarily through their differentiation into osteoblasts and other skeletal lineage cells. Key signaling pathways, including Wnt, TGF-β/BMP, PTH, Hedgehog, and IGF, act as critical regulators of MSC osteogenesis, playing pivotal roles in maintaining bone homeostasis and facilitating regeneration. These pathways interact in distinct ways at various stages of bone development, mineralization, and remodeling. This review provides an overview of the molecular mechanisms by which these pathways regulate MSC osteogenesis, their influence on bone tissue formation, and their implications in bone diseases and therapeutic strategies. Additionally, we explore the potential applications of these pathways in bone tissue engineering, with a particular focus on promoting the use of MSCs as seed cells for bone defect repair. Ultimately, this review aims to highlight potential avenues for advancing bone biology research, treating bone disorders, and enhancing regenerative medicine.

A comprehensive review on recent advancements in drug delivery via selenium nanoparticles

Nanotechnology has significantly impacted drug discovery and development over the past three decades, offering novel insights and expanded treatment options. Key to this field is nanoparticles, ranging from 1 to 100 nanometres, with unique properties distinct from larger materials. Selenium nanoparticles (SeNPs) are particularly promising due to their low toxicity and selective cytotoxicity against cancer cells. They have shown efficacy in reducing various cancers types and mitigating conditions like diabetic nephropathy and neurological disorders, such as Alzheimer's disease. This review highlights SeNPs' role in enhancing drug delivery systems, improving the absorption of water-soluble compounds, proteins, peptides, vaccines, and other biological therapies. By modifying nanoparticle surfaces with targeting ligands, drug delivery can achieve precise site-specific delivery, increasing effectiveness. SeNPs can be synthesised through physical, chemical, and biological methods, each offering advantages in stability, size, and application potential. Additionally, SeNPs enhance immune responses and reduce oxidative stress, validating their role in biotherapy and nanomedicine. Their ability to target macrophages and regulate polarisation underscores their potential in antimicrobial therapies. Recent advancements, such as mannosylated SeNPs for targeted delivery, exemplify innovative nanotechnology applications in medicine. Overall, SeNPs represent a promising frontier in nanomedicine, offering new avenues for treating and managing various diseases.

Extracellular derivatives for bone metabolism

BACKGROUND

Bone metabolism can maintain the normal homeostasis and function of bone tissue. Once the bone metabolism balance is broken, it will cause osteoporosis, osteoarthritis, bone defects, bone tumors, or other bone diseases. However, such orthopedic diseases still have many limitations in clinical treatment, such as drug restrictions, drug tolerance, drug side effects, and implant rejection.

AIM OF REVIEW

In complex bone therapy and bone regeneration, extracellular derivatives have become a promising research focus to solve the problems of bone metabolic diseases. These derivatives, which include components such as extracellular matrix, growth factors, and extracellular vesicles, have significant therapeutic potential. It has the advantages of good biocompatibility, low immune response, and dynamic demand for bone tissue. The purpose of this review is to provide a comprehensive perspective on extracellular derivatives for bone metabolism and elucidate the intrinsic properties and versatility of extracellular derivatives. Further discussion of them as innovative advanced orthopedic materials for improving the effectiveness of bone therapy and regeneration processes.

KEY SCIENTIFIC CONCEPTS OF REVIEW

In this review, we first listed the types and functions of three extracellular derivatives. Then, we discussed the effects of extracellular derivatives of different cell sources on bone metabolism. Subsequently, we collected applications of extracellular derivatives in the treatment of bone metabolic diseases and summarized the advantages and challenges of extracellular derivatives in clinical applications. Finally, we prospected the extracellular derivatives in novel orthopedic materials and clinical applications. We hope that the comprehensive understanding of extracellular derivatives in bone metabolism will provide new solutions to bone diseases.

In vitrodegradation of a chitosan-based osteochondral construct points to a transient effect on cellular viability

Bioresorbable chitosan scaffolds have shown potential for osteochondral repair applications. Thein vivodegradation of chitosan, mediated by lysozyme and releasing glucosamine, enables progressive replacement by ingrowing tissue. Here the degradation process of a chitosan-nHA based bioresorbable scaffold was investigated for mass loss, mechanical properties and degradation products released from the scaffold when subjected to clinically relevant enzyme concentrations. The scaffold showed accelerated mass loss during the early stages of degradation but without substantial reduction in mechanical strength or structure deterioration. Although not cytotoxic, the medium in which the scaffold was degraded for over 2 weeks showed a transient decrease in mesenchymal stem cell viability, and the main degradation product (glucosamine) demonstrated a possible adverse effect on viability when added at its peak concentration. This study has implications for the design and biomedical application of chitosan scaffolds, underlining the importance of modelling degradation products to determine suitability for clinical translation.

Fabrication of bioactive glass/phosphorylated chitosan composite scaffold and its effects on MC3T3-E1 cells

This study aimed to synthesize bioactive glass (BG) and phosphorylated chitosan (PCS), and fabricate a BG/PCS composite scaffold. The physical properties (mechanical strength, swelling degree, and degradation rate) of the BG/PCS scaffold were tested. Thein vitromineralization properties of composite scaffolds in simulated body fluid were investigated. MC3T3-E1 cell responses with the BG/PCS scaffold were investigated using live/dead cell staining, actin staining, alkaline phosphatase (ALP) activity, and Alizarin red staining. Our results showed that the scaffold had an inner porous structure, good swelling properties, and good degradation rate. After immersion in SBF, the scaffolds demonstrated high properties in inducing mineralization. Leaching solutions of the composite scaffolds exhibited good cytocompatibility. MC3T3-E1 cells adhered, spread, and proliferated on the scaffold. The BG/PCS composite scaffold showed osteo-inductive activity by increasing ALP activity and calcium deposition. Our results indicated that the BG/PCS scaffold had potential applications as a bone-defect repair biomaterial.

Nature to Nurture: Chitosan nanopowder a natural carbohydrate polymer choice of egg parasitoid, Trichogramma Japonicum Ashmead

Chitosan is a naturally occurring linear biopolymer made of partially deacetylated acetyl and N-acetyl glucosamine. Its biocompatible physiochemical and biochemical properties are unmatched. Chitosan is transformed to nanopowder for use in agriculture and associated industries as nanocarriers for existing agrochemicals, ensuring the delayed release of chemicals with better solubility. Chitosan nanopowder applied to leaves or soil can activate a plant's natural defences against insects and pathogens. These studies were carried out because there is a potential for toxicological risk linked with products created utilizing nanotechnology, such as chitosan nanopowder, and therefore researchers felt the need to investigate this. The egg parasitoides Trichogramma Japonicum Ashmead was used as a low-cost biomarker to determine the potential toxicity of chitosan nanopowder. This study looked into the possibility that the adult stage of the egg parasitoids, Trichogramma Japonicum Ashmead might be negatively impacted by chitosan nanopowder (80-100 nm). Unpaired t-test statistical analysis has been carried out. According to the statistical analysis, host eggs exposed to chitosan nanopowder showed noticeably greater parasitization than the control group. As a natural supply of carbohydrate polymers chitosan nanopowder promotes the parasitization of T. Japonicum. The findings showed that T. Japonicum favoured chitosan nanopowder. Through Y dual choice, eight-arm multiple choice, and no-choice olfactometer experiments, as well as images from a stereozoom microscope and a scanning electron microscope (SEM), the data was thoroughly supported. Future agricultural applications of chitosan nanopowder will benefit from a deeper understanding of our findings.

Algal Phycocolloids: Bioactivities and Pharmaceutical Applications

Seaweeds are abundant sources of diverse bioactive compounds with various properties and mechanisms of action. These compounds offer protective effects, high nutritional value, and numerous health benefits. Seaweeds are versatile natural sources of metabolites applicable in the production of healthy food, pharmaceuticals, cosmetics, and fertilizers. Their biological compounds make them promising sources for biotechnological applications. In nature, hydrocolloids are substances which form a gel in the presence of water. They are employed as gelling agents in food, coatings and dressings in pharmaceuticals, stabilizers in biotechnology, and ingredients in cosmetics. Seaweed hydrocolloids are identified in carrageenan, alginate, and agar. Carrageenan has gained significant attention in pharmaceutical formulations and exhibits diverse pharmaceutical properties. Incorporating carrageenan and natural polymers such as chitosan, starch, cellulose, chitin, and alginate. It holds promise for creating biodegradable materials with biomedical applications. Alginate, a natural polysaccharide, is highly valued for wound dressings due to its unique characteristics, including low toxicity, biodegradability, hydrogel formation, prevention of bacterial infections, and maintenance of a moist environment. Agar is widely used in the biomedical field. This review focuses on analysing the therapeutic applications of carrageenan, alginate, and agar based on research highlighting their potential in developing innovative drug delivery systems using seaweed phycocolloids.

Recent progressions in biomedical and pharmaceutical applications of chitosan nanoparticles: A comprehensive review

Nowadays, the most common approaches in the prognosis, diagnosis, and treatment of diseases are along with undeniable limitations. Thus, the ever-increasing need for using biocompatible natural materials and novel practical modalities is required. Applying biomaterials, such as chitosan nanoparticles (CS NPs: FDA-approved long-chain polymer of N-acetyl-glucosamine and D-glucosamine for some pharmaceutical applications), can serve as an appropriate alternative to overcome these limitations. Recently, the biomedical applications of CS NPs have extensively been investigated. These NPs and their derivatives can not only prepare through different physical and chemical approaches but also modify with various molecules and bioactive materials. The potential properties of CS NPs, such as biocompatibility, biodegradability, serum stability, solubility, non-immunogenicity, anti-inflammatory properties, appropriate pharmacokinetics and pharmacodynamics, and so forth, have made them excellent candidates for biomedical applications. Therefore, CS NPs have efficiently applied for various biomedical applications, like regenerative medicine and tissue engineering, biosensors for the detection of microorganisms, and drug delivery systems (DDS) for the suppression of diseases. These NPs possess a high level of biosafety. In summary, CS NPs have the potential ability for biomedical and clinical applications, and it would be remarkably beneficial to develop new generations of CS-based material for the future of medicine.

A Review on Recent Advances in Mannose-Functionalized Targeted Nanocarrier Delivery Systems in Cancer and Infective Therapeutics

Unmodified nanocarriers used in the chemotherapy of cancers and various infectious diseases exhibit prolonged blood circulation time, prevent enzymatic degradation and increase chemical stability of encapsulated therapeutics. However, off-target effect and lack of specificity associated with unmodified nanoparticles (NPs) limit their applications in the health care system. Mannose (Man) receptors with significant overexpression on antigen-presenting cells and macrophages are among the most admired targets for cancer and anti-infective therapeutics. Therefore, development of Man functionalized nanocarriers targeting Man receptors, for target specific drug delivery in the chemotherapy have been extensively studied. Present review expounds diverse Man-conjugated NPs with their potential for targeted drug delivery, improved biodistribution profiles and localization. Additionally, the review gives detailed account of the interactions of mannosylated NPs with various biological systems and their characterization not discussed in earlier published reports is discussed.

Surface Engineering of Auxetic Scaffolds for Neural and Vascular Differentiation from Human Pluripotent Stem Cells

Auxetic materials are the materials that can display negative Poisson's ratio that describes the degree to which a material contracts (or expands) transversally when axially strained. Human stem cells sense the mechanical properties of the microenvironment, including material surface properties, stiffness, and Poisson's ratio. In this study, six different auxetic polyurethane (PU) foams with different elastic modulus (0.7-1.8 kPa) and Poisson's ratio (-0.1 to -0.5) are used to investigate lineage specification of human induced pluripotent stem cells (hiPSCs). The surfaces of the foams are modified with chitosan or heparin to enhance the adhesion and proliferation of hiPSCs. Then, the vascular and neural differentiation of hiPSCs are investigated on different foams with distinct elastic modulus and Poisson's ratio. With different auxetic foams, cells show differential adherent density and differentiation capacity. Chitosan and heparin surface functionalization promote the hindbrain and hippocampal markers, but not forebrain markers during neural patterning of hiPSCs. Properly surface engineered auxetic scaffolds can also promote vascular differentiation of hiPSCs. This study represents a versatile and multifunctional scaffold fabrication approach and can lead to a suitable system for establishing hiPSC culture models in applications of neurovascular disease modeling and drug screening.

Chitosan Nanoparticles: A Versatile Platform for Biomedical Applications

Chitosan is a biodegradable and biocompatible natural polymer that has been extensively explored in recent decades. The Food and Drug Administration has approved chitosan for wound treatment and nutritional use. Furthermore, chitosan has paved the way for advancements in different biomedical applications including as a nanocarrier and tissue-engineering scaffold. Its antibacterial, antioxidant, and haemostatic properties make it an excellent option for wound dressings. Because of its hydrophilic nature, chitosan is an ideal starting material for biocompatible and biodegradable hydrogels. To suit specific application demands, chitosan can be combined with fillers, such as hydroxyapatite, to modify the mechanical characteristics of pH-sensitive hydrogels. Furthermore, the cationic characteristics of chitosan have made it a popular choice for gene delivery and cancer therapy. Thus, the use of chitosan nanoparticles in developing novel drug delivery systems has received special attention. This review aims to provide an overview of chitosan-based nanoparticles, focusing on their versatile properties and different applications in biomedical sciences and engineering.

Surveying the Oral Drug Delivery Avenues of Novel Chitosan Derivatives

Chitosan has come a long way in biomedical applications: drug delivery is one of its core areas of imminent application. Chitosan derivatives are the new generation variants of chitosan. These modified chitosans have overcome limitations and progressed in the area of drug delivery. This review briefly surveys the current chitosan derivatives available for biomedical applications. The biomedical applications of chitosan derivatives are revisited and their key inputs for oral drug delivery have been discussed. The limited use of the vast chitosan resources for oral drug delivery applications, speculated to be probably due to the interdisciplinary nature of this research, is pointed out in the discussion. Chitosan-derivative synthesis and practical implementation for oral drug delivery require distinct expertise from chemists and pharmacists. The lack of enthusiasm could be related to the inadequacy in the smooth transfer of the synthesized derivatives to the actual implementers. With thiolated chitosan derivatives predominating the oral delivery of drugs, the need for representation from the vast array of ready-to-use chitosan derivatives is emphasized. There is plenty to explore in this direction.

Chitosan-Based Biomaterial Scaffolds for the Repair of Infected Bone Defects

The treatment of infected bone defects includes infection control and repair of the bone defect. The development of biomaterials with anti-infection and osteogenic ability provides a promising strategy for the repair of infected bone defects. Owing to its antibacterial properties, chitosan (an emerging natural polymer) has been widely studied in bone tissue engineering. Moreover, it has been shown that chitosan promotes the adhesion and proliferation of osteoblast-related cells, and can serve as an ideal carrier for bone-promoting substances. In this review, the specific molecular mechanisms underlying the antibacterial effects of chitosan and its ability to promote bone repair are discussed. Furthermore, the properties of several kinds of functionalized chitosan are analyzed and compared with those of pure chitosan. The latest research on the combination of chitosan with different types of functionalized materials and biomolecules for the treatment of infected bone defects is also summarized. Finally, the current shortcomings of chitosan-based biomaterials for the treatment of infected bone defects and future research directions are discussed. This review provides a theoretical basis and advanced design strategies for the use of chitosan-based biomaterials in the treatment of infected bone defects.

Development and in vitro assessment of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold

An innovative approach was developed to engineer a multi-layered chitosan scaffold for osteochondral defect repair. A combination of freeze drying and porogen-leaching out methods produced a porous, bioresorbable scaffold with a distinct gradient of pore size (mean = 160-275 μm). Incorporation of 70 wt% nano-hydroxyapatite (nHA) provided additional strength to the bone-like layer. The scaffold showed instantaneous mechanical recovery under compressive loading and did not delaminate under tensile loading. The scaffold supported the attachment and proliferation of human mesenchymal stem cells (MSCs), with typical adherent cell morphology found on the bone layer compared to a rounded cell morphology on the chondrogenic layer. Osteogenic and chondrogenic differentiation of MSCs preferentially occurred in selected layers of the scaffold in vitro, driven by the distinct pore gradient and material composition. This scaffold is a suitable candidate for minimally invasive arthroscopic delivery in the clinic with potential to regenerate damaged cartilage and bone.

Strong and Elastic Chitosan/Silk Fibroin Hydrogels Incorporated with Growth-Factor-Loaded Microspheres for Cartilage Tissue Engineering

An emulsification method was developed for fabricating core-shell microspheres with a thick shell layer. Kartogenin (KGN) and platelet-derived growth factor BB (PDGF-BB) were respectively loaded into the core portion and the shell layer of the microspheres with high loading efficiency. The optimally built microspheres were combined with chitosan (CH) and silk fibroin (SF) to construct a new type of composite hydrogel with enhanced strength and elasticity, using genipin or/and tyrosinase as crosslinkers for the intended use in cartilage tissue engineering. The composite hydrogels were found to be thermo-responsive at physiological temperature and pH with well-defined injectability. Rheological measurements revealed that they had an elastic modulus higher than 6 kPa with a high ratio of elastic modulus to viscous modulus, indicative of their mechanically strong features. Compressive measurements demonstrated that they possessed well-defined elasticity. In addition, some gels had the ability to administer the temporal separation release of PDGF-BB and KGN in an approximately linear manner for several weeks. The released PDGF-BB was found to be bioactive based on its effects on Balb/c 3T3 cells. The composite gels supported the growth of seeded chondrocytes while preserving their phenotype. The results suggest that these composite gels have the potential for endogenous cartilage repair.

Towards Induction of Angiogenesis in Dental Pulp Stem Cells Using Chitosan-Based Hydrogels Releasing Basic Fibroblast Growth Factor

Introduction. Chitosan is a natural biopolymer that attracted enormous attention in biomedical fields. The main components of regenerative endodontic procedures (REPs), as well as tissue engineering, are scaffolds, stem cells, and growth factors. As one of the basic factors in the REPs is maintaining vascularization, this study was aimed at developing basic fibroblast growth factor- (bFGF-) loaded scaffolds and investigating their effects on the angiogenic induction in human dental pulp stem cells (hDPSCs). Methods. Poly (ε-caprolactone) (PCL)/chitosan- (CS-) based highly porous scaffold (PCL/CS) was prepared and evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analyses. The adhesion and survival potency of seeded cells were assessed by SEM and MTT assays, respectively. The amount of angiogenic markers was investigated in gene and protein levels by real-time PCR and western blotting assays, respectively. Results. Based on our findings, the SEM and FTIR tests confirmed the appropriate structure of synthesized scaffolds. Besides, the adhesion and survival rate of cells and the levels of VEGFR-2, Tie2, and Angiopoietin-1 genes were increased significantly in the PCL/CS/bFGF group. Also, the western blotting results showed the upregulation of these markers at protein levels, which were considerably higher at the PCL/CS/bFGF group ( $P<0.05$ ). Conclusions. On a more general note, this study demonstrates that the bFGF-loaded PCL/CS scaffolds have the potential to promote angiogenesis of hDPSCs, which could provide vitality of dentin-pulp complex as the initial required factor for regenerative endodontic procedures.

Chitosan Reinforced with Kenaf Nanocrystalline Cellulose as an Effective Carrier for the Delivery of Platelet Lysate in the Acceleration of Wound Healing

The clinical use of platelet lysate (PL) in the treatment of wounds is limited by its rapid degradation by proteases at the tissue site. This research aims to develop a chitosan (CS) and kenaf nanocrystalline cellulose (NCC) hydrogel composite, which intend to stabilize PL and control its release onto the wound site for prolonged action. NCC was synthesized from raw kenaf bast fibers and incorporated into the CS hydrogel. The physicochemical properties, in vitro cytocompatibility, cell proliferation, wound scratch assay, PL release, and CS stabilizing effect of the hydrogel composites were analyzed. The study of swelling ratio (>1000%) and moisture loss (60-90%) showed the excellent water retention capacity of the CS-NCC-PL hydrogels as compared with the commercial product. In vitro release PL study (flux = 0.165 mg/cm2/h) indicated that NCC act as a nanofiller and provided the sustained release of PL compared with the CS hydrogel alone. The CS also showed the protective effect of growth factor (GF) present in PL, thereby promoting fast wound healing via the formulation. The CS-NCC hydrogels also augmented fibroblast proliferation in vitro and enhanced wound closures over 72 h. This study provides a new insight on CS with renewable source kenaf NCC as a nanofiller as a potential autologous PL wound therapy.

Spatial-Temporal Patterns and Inflammatory Factors of Bone Matrix Remodeling

The bone extracellular matrix (ECM) contains organic and mineral constituents. The establishment and degradation processes of ECM connect with spatial and temporal patterns, especially circadian rhythms in ECM. These patterns are responsible for the physical and biological characteristics of bone. The disturbances of the patterns disrupt bone matrix remodeling and cause diverse bone diseases, such as osteogenesis imperfecta (OI) and bone fracture. In addition, the main regulatory factors and inflammatory factors also follow circadian rhythms. Studies show that the circadian oscillations of these factors in bone ECM potentially influence the interactions between immune responses and bone formation. More importantly, mesenchymal stem cells (MSCs) within the specific microenvironments provide the regenerative potential for tissue remodeling. In this review, we summarize the advanced ECM spatial characteristics and the periodic patterns of bone ECM. Importantly, we focus on the intrinsic connections between the immunoinflammatory system and bone formation according to circadian rhythms of regulatory factors in bone ECM. And our research group emphasizes the multipotency of MSCs with their microenvironments. The advanced understandings of bone ECM formation patterns and MSCs contribute to providing optimal prevention and treatment strategies.

The effects of the molecular weight of chitosan on the tissue inflammatory response

The molecular weight of chitosan (CS) may affect its physical properties and its ability to induce an appropriate host response. The biocompatibilities of CS membranes of low (LMWCS) and high (HMWCS) molecular weight were investigated by inserting these materials into the subcutaneous tissue of rats for 1-28 days and evaluating leukocyte infiltration, granulation tissue, fibrosis, arginase-1 immunostaining, as well as nuclear factor-κB (NF-κΒ) and fibroblast growth factor (FGF)-2 expressions. Both CS membranes induced a peak of leukocyte infiltration on the first day of insertion and stimulated granulation and fibrous tissue generation when compared to control. LMWCS induced more collagen deposition a week earlier, when compared to the control and HMWCS membrane. The membranes also increased arginase-1 immunostaining, a M2 macrophage marker. M2 macrophage is recognized as anti-inflammatory and pro-regenerative. NF-κB is an essential biomarker of the inflammatory process and induces the expression of several pro-inflammatory cytokines. The LMWCS membrane reduced inflammation, as indicated by a reduced nucleus/cytoplasm NF-κB ratio in surrounding tissue from days 7 to 14 when compared to control. On the first day, the expression of FGF-2, a biomarker of inflammatory resolution, was increased in the tissue of the LWMCS group, when compared with HMWCS, which was consistent with the type I collagen deposition. Thus, LWMCS was associated with a prior reduction of the inflammatory response and improved wound healing.

Evaluation of the effects of nanoparticles on the therapeutic function of platelet: a review

OBJECTIVES

Nanotechnology and nanoparticles are used in different applications in disease monitoring and therapy in contact with blood. Nanoparticles showed different effects on blood components and reduced or improved the function of therapeutic platelet during the storage time. This review study was performed to evaluate the impacts of various sizes and charges of nanoparticles on platelet function and storage time. The present review contains the literature between 2010 and 2020. The data have been used from different sites such as PubMed, Wiley, ScienceDirect and online electronic journals.

KEY FINDINGS

From the literature survey, it has been demonstrated that among various properties, size and charge of nanoparticles were critical on the function of therapeutic platelet during the storage and inhibition of their aggregation. Overall, this study described that nanoparticles with smaller size and negative charge were more effective in increasing the survival time, inhibition of aggregation and improving the function of therapeutic platelet.

SUMMARY

Based on the current review, it can be confirmed that nanoparticles such as dendrimer, Au, Ag and iron oxide nanoparticles with smaller size and negative charge have significant advantages for improving the efficacy of platelets during the storage chain and inhibition of their aggregation.

Role of m6A in osteoporosis, arthritis and osteosarcoma (Review)

RNA modification is a type of post-transcriptional modification that regulates important cellular pathways, such as the processing and metabolism of RNA. The most abundant form of methylation modification is RNA N6-methyladenine (m6A), which plays various post-transcriptional regulatory roles in cellular biological functions, including cell differentiation, embryonic development and disease occurrence. Bones play a pivotal role in the skeletal system as they support and protect muscles and other organs, facilitate movement and ensure haematopoiesis. The development and remodelling of bones require a delicate and accurate regulation of gene expression by epigenetic mechanisms that involve modifications of histone, DNA and RNA. The present review discusses the enzymes and proteins involved in mRNA m6A methylation modification and summarises current research progress and the mechanisms of mRNA m6A methylation in common orthopaedic diseases, including osteoporosis, arthritis and osteosarcoma.

Radially patterned transplantable biodegradable scaffolds as topographically defined contact guidance platforms for accelerating bone regeneration

BACKGROUND

The healing of large critical-sized bone defects remains a clinical challenge in modern orthopedic medicine. The current gold standard for treating critical-sized bone defects is autologous bone graft; however, it has critical limitations. Bone tissue engineering has been proposed as a viable alternative, not only for replacing the current standard treatment, but also for producing complete regeneration of bone tissue without complex surgical treatments or tissue transplantation. In this study, we proposed a transplantable radially patterned scaffold for bone regeneration that was defined by capillary force lithography technology using biodegradable polycaprolactone polymer.

RESULTS

The radially patterned transplantable biodegradable scaffolds had a radial structure aligned in a central direction. The radially aligned pattern significantly promoted the recruitment of host cells and migration of osteoblasts into the defect site. Furthermore, the transplantable scaffolds promoted regeneration of critical-sized bone defects by inducing cell migration and differentiation.

CONCLUSIONS

Our findings demonstrated that topographically defined radially patterned transplantable biodegradable scaffolds may have great potential for clinical application of bone tissue regeneration.

Role of bone 1stem cell-seeded 3D polylactic acid/polycaprolactone/hydroxyapatite scaffold on a critical-sized radial bone defect in rat

Osteoconductive biomaterials were used to find the most reliable materials in bone healing. Our focus was on the bone healing capacity of the stem cell-loaded and unloaded PLA/PCL/HA scaffolds. The 3D scaffold of PLA/PCL/HA was characterized by scanning electron microscopy (SEM), rheology, X-ray diffraction (XRD), and Fourier transform-infrared (FT-IR) spectroscopy. Bone marrow stem cells (BMSCs) have multipotential differentiation into osteoblasts. Forty Wistar male rats were used to organize four experimental groups: control, autograft, scaffold, and BMSCs-loaded scaffold groups. qRT-PCR showed that the BMSCs-loaded scaffold had a higher expression level of CD31 and osteogenic markers compared with the control group (P < 0.05). Radiology and computed tomography (CT) scan evaluations showed significant improvement in the BMSCs-loaded scaffold compared with the control group (P < 0.001). Biomechanical estimation demonstrated significantly higher stress (P < 0.01), stiffness (P < 0.001), and ultimate load (P < 0.01) in the autograft and BMSCs-loaded scaffold groups compared with the untreated group and higher strain was seen in the control group than the other groups (P < 0.01). Histomorphometric and immunohistochemical (IHC) investigations showed significantly improved regeneration scores in the autograft and BMSCs-loaded scaffold groups compared with the control group (P < 0.05). Also, there was a significant difference between the scaffold and control groups in all tests (P < 0.05). The results depicted that our novel approach will allow to develop PLA/PCL/HA 3D scaffold in bone healing via BMSC loading.

Effects of platelet-rich plasma injection for pain control and cartilage repair in knee osteoarthritis: A protocol for the systematic review and meta-analysis of randomized controlled trials in animal models

BACKGROUND

Knee osteoarthritis (KOA) is a common disabling condition and a heavy financial burden to the society. Platelet-rich plasma (PRP) is considered to be an effective method in the repair and regeneration of cartilage and alleviate pain in KOA. But the utilising of PRP to treat KOA in clinical has shown variable results from many studies. The objective of this protocol is to determine the efficacy of PRP in pain control and cartilage repair in KOA animal models.

METHOD

We will search the following three electronic databases: MEDLINE, EMBASE and Web of Science. The primary outcome will include the histological score of cartilage and pain score. The secondary outcomes will be the behavioural assessments and cartilage thickness. SYRCLE's risk of bias tool will be used to assessment the risk of bias of including studies. The standardized mean difference and 95% confidence interval will be used to calculate the effect of PRP treatment. The I2 inconsistency values will be used to calculated the heterogeneity between studies.

RESULTS

The results of this paper will be submitted to a peer-reviewed journal for publication.

CONCLUSION

This research will determine the efficacy of PRP of the treatment of knee osteoarthritis model.

PROSPERO REGISTRATION NUMBER

CRD42020181589.

Enhanced full-thickness wound healing via Sophora gibbosa extract delivery based on a chitosan/gelatin dressing incorporating microemulsion

There are many synthetic drugs in literature have been utilized in healing of the wounds although the natural product specially antioxidants can offer similar if not better biological activity in that regard. Genus Sophora is well known to contain flavonoids and phenolic compounds which have antioxidant and inflammatory effects. So, the aim of the current study was to develop and evaluate chitosan/gelatin based Sophora gibbosa extract-loaded microemulsion as wound dressing. Sophora gibbosa extract (SGE) contained 16 major compounds which have reasonable antioxidant activity. The developed microemulsion showed that Tween 80 produced significant (p < 0.05) lower particle size than Pluronic F127 at the same SGE concentration whereas high concentration of extract results in large particle size. Thermodynamic stability studies showed that using higher concentration of the extract produced less stable formulations. The selected formulation was impregnated in the dressing base (chitosan/gelatin; 2:1 w/w ratio) which exhibited more water absorption. In vivo evaluation revealed that the dressing displayed superior wound repair compared to the control in terms histological examination and determination of alpha smooth muscle actin (α-SMA) and proliferating cell nuclear antigen (PCNA). Thus, SGE-loaded microemulsion-impregnated gelatin/chitosan could be a potential candidate for the wound healing.

Evaluation of conditioned medium from placenta-derived mesenchymal stem cells as a storage medium for avulsed teeth: An in vitro study

BACKGROUND/AIM

The viability of periodontal ligament cells on the root surface is a major factor that influences the healing of replanted teeth. A suitable storage medium is necessary to preserve avulsed teeth before replantation. Conditioned medium from placenta-derived mesenchymal stem cells (PMSC-CM) contains a variety of growth factors. The aim of this study was to evaluate the effectiveness of PMSC-CM as a storage medium to maintain the cell viability of avulsed teeth.

MATERIAL AND METHODS

Extracted premolars from healthy humans were randomly stored in Hank's balanced salt solution (HBSS) and PMSC-CM for 6, 12 and 24 hours, respectively, at room temperature, and then the ratio of apoptosis of the periodontal ligament (PDL) cells was identified by flow cytometry. Human periodontal ligament stem cells (PDLSCs) were incubated with HBSS and PMSC-CM, respectively, for 6, 12, 24 and 48 hours in 5% CO₂ at 37°C. Then, the cell viability of PDLSCs was determined using the cell counting kit-8 (CCK-8) and a cell cycle assay was performed.

RESULTS

The apoptosis rate of PDL cells in PMSC-CM was significantly lower than that in HBSS at 24 hours (P < .001), while the two groups showed similar cell apoptosis rates at 6 and 12 hours (P > .05). The cell proliferation of PDLSCs treated with PMSC-CM significantly increased compared with the HBSS group (P < .05). The cell cycle assay revealed that the PDLSCs treated with HBSS were arrested at the G1 phase, while there was no difference between the PMSC-CM group and the control group (P > .05).

CONCLUSIONS

Compared with HBSS, PMSC-CM showed better inhibition of apoptosis of PDL cells and promoted the proliferation of PDLSCs. Thus, PMSC-CM could be a promising storage medium for avulsed teeth.

Degradable Hydrogels for the Delivery of Immune-modulatory Proteins in the Wound Environment

Chronic wounds represent a growing clinical problem for which limited treatment strategies exist. Defects in immune cell-mediated healing play an important role in chronic wound development, presenting an attractive clinical target in the treatment of chronic wounds. However, efforts to improve healing through the application of growth factors and cytokines have been limited by the rapid degradation and diffusion of these molecules in the wound environment. In this study we sought to overcome the challenge of rapid diffusion through the development of a hydrogel delivery system in which protein cargo can be released into the wound environment at a constant and tunable rate. This system was used to deliver the intercellular adhesion molecule-1 (ICAM-1) in order to target endogenous cells upstream of growth factor and cytokine production and circumvent the issue of their rapid degradation. We demonstrated that our delivery system was able to release cargo at different and highly controllable rates and thereby improved cargo retention in the wound environment. Additionally, treatment with ICAM-1 in the delivery system improved healing in both ICAM-1-deficient mice and an aged mouse model of delayed healing, highlighting a potential clinical benefit for this protein in the treatment of chronic wounds.

Effectiveness of mesenchymal stem cell-seeded onto the 3D polylactic acid/polycaprolactone/hydroxyapatite scaffold on the radius bone defect in rat

PURPOSE

The importance of regeneration in large bone defects forces the orthopedic surgeons to search for a proper methodology. The present experiment evaluated the capability of polylactic acid/polycaprolactone/hydroxyapatite (PLA/PCL/HA) scaffold loaded with and without mesenchymal stem cells (MSCs) on bone regeneration.

METHODS

Fourier transform infrared spectrometry, X-ray diffraction, scanning electron microscopy, and rheology methodologies were used to characterize the scaffold. Forty Wistar rats were randomly divided into the four groups including the untreated defects as the control group and three other groups in which the bone defects were treated with autologous bones (autograft group), the PLA/PCL/HA scaffolds (PLA/PCL/HA group), and the MSCs-seeded scaffolds (MSCs-seeded PLA/PCL/HA group).

RESULTS

Based on the qRT-PCR results, significantly higher expression levels of osteocalcin, osteopontin, and CD31 were seen in the cell-seeded scaffold group compared to the control group (P < 0.05). The CT scanning and radiographic images depicted significantly more newly formed bonny tissue in the MSCs-loaded scaffold and autograft groups than the untreated group (P < 0.001). The immunohistochemistry, biomechanical, histopathologic, and histomorphometric evaluations demonstrated significantly improved regeneration in the autograft and MSCs-loaded scaffold groups compared to the non-treated group (P < 0.05). There were significant differences between the scaffold and untreated groups in all in vivo evaluations (P < 0.05).

CONCLUSION

The MSCs enhanced bone healing potential of the PLA/PCL/HA scaffold and the MSCs-seeded scaffold was comparable to the autograft as the golden treatment regimen (P > 0.05).

Osteogenesis and bone remodeling: A focus on growth factors and bioactive peptides

Bone is one of the most frequently transplanted tissues. The bone structure and its physiological function and stem cells biology were known to be closely related to each other for many years. Bone is considered a home to the well-known systems of postnatal mesenchymal stem cells (MSCs). These bone resident MSCs provide a range of growth factors (GF) and cytokines to support cell growth following injury. These GFs include a group of proteins and peptides produced by different cells which are regulators of important cell functions such as division, migration, and differentiation. GF signaling controls the formation and development of the MSCs condensation and plays a critical role in regulating osteogenesis, chondrogenesis, and bone/mineral homeostasis. Thus, a combination of both MSCs and GFs receives high expectations in regenerative medicine, particularly in bone repair applications. It is known that the delivery of exogenous GFs to the non-union bone fracture site remarkably improves healing results. Here we present updated information on bone tissue engineering with a specific focus on GF characteristics and their application in cellular functions and tissue healing. Moreover, the interrelation of GFs with the damaged bone microenvironment and their mechanistic functions are discussed.

From microporous to mesoporous mineral frameworks: An alliance between zeolite and chitosan

Microporous and mesoporous minerals are key elements of advanced technological cycles nowadays. Nature-driven microporous materials are known for biocompatibility and renewability. Zeolite is known as an eminent microporous hydrated aluminosilicate mineral containing alkali metals. It is commercially available as adsorbent and catalyst. However, the large quantity of water uptake occupies active sites of zeolite making it less efficient. The widely-used chitosan polysaccharide has also been used in miscellaneous applications, particularly in medicine. However, inferior mechanical properties hampered its usage. Chitosan-modified zeolite composites exhibit superior properties compared to parent materials for innumerable requests. The alliance between a microporous and a biocompatible material with the accompaniment of negative and positive charges, micro/nanopores and proper mechanical properties proposes promising platforms for different uses. In this review, chitosan-modified zeolite composites and their applications have been overviewed.

Human periodontal ligament stem cells on calcium phosphate scaffold delivering platelet lysate to enhance bone regeneration

Human periodontal ligament stem cells (hPDLSCs) are promising for tissue engineering applications but have received relatively little attention. Human platelet lysate (HPL) contains a cocktail of growth factors. To date, there has been no report on hPDLSC seeding on scaffolds loaded with HPL. The objectives of this study were to develop a calcium phosphate cement (CPC)-chitosan scaffold loaded with HPL and investigate their effects on hPDLSC viability, osteogenic differentiation and bone mineral synthesis for the first time. hPDLSCs were harvested from extracted human teeth. Scaffolds were formed by mixing CPC powder with a chitosan solution containing HPL. Four groups were tested: CPC-chitosan + 0% HPL (control); CPC-chitosan + 2.66% HPL; CPC-chitosan + 5.31% HPL; CPC-chitosan + 10.63% HPL. Scanning electron microscopy, live/dead staining, CCK-8, qRT-PCR, alkaline phosphatase and bone minerals assay were applied for hPDLSCs on scaffolds. hPDLSCs attached well on CPC-chitosan scaffold. Adding 10.63% HPL into CPC increased cell proliferation and viability (p < 0.05). ALP gene expression of CPC-chitosan + 10.63% HPL was 7-fold that of 0% HPL at 14 days. Runx2, OSX and Coll1 of CPC-chitosan + 10.63% HPL was 2-3 folds those at 0% HPL (p < 0.05). ALP activity of CPC-chitosan + 10.63% HPL was 2-fold that at 0% HPL (p < 0.05). Bone minerals synthesized by hPDLSCs for CPC-chitosan + 10.63% HPL was 3-fold that at 0% HPL (p < 0.05). This study showed that CPC-chitosan scaffold was a promising carrier for HPL delivery, and HPL in CPC exerted excellent promoting effects on hPDLSCs for bone tissue engineering for the first time. The novel hPDLSC-CPC-chitosan-HPL construct has great potential for orthopedic, dental and maxillofacial regenerative applications.

Thermosensitive Hydrogel Delivery of Human Periodontal Stem Cells Overexpressing Platelet-Derived Growth Factor-BB Enhances Alveolar Bone Defect Repair

Alveolar bone defects can arise as a consequence of trauma, infection, periodontal disease, or congenital alveolar fenestration. Many approaches have been employed in an effort to treat or overcome such defects, but the ability to effectively achieve alveolar regeneration remains elusive. Platelet-derived growth factor-BB (PDGF-BB) has been shown to serve as a key factor capable of orchestrating cell proliferation, angiogenesis, and chemoattraction in the context of osteogenic processes. Exactly how PDGF-BB affects human periodontal ligament stem cells (hPDLSCs), however, requires further exploration. In this report, we utilized a lentiviral construct to achieve PDGF-BB overexpression in hPDLSCs, allowing us to establish that this gene was able to enhance the proliferation of these cells and to mediate osteogenic gene upregulation therein. In addition, we established a rat model of alveolar defects that were implanted using different complexes, and then monitored through histological and micro-CT analyses 4 and 8 weeks postsurgery to assess bone repair outcomes. These analyses revealed that a thermosensitive hydrogel was an effective 3D cell culture scaffold, while PDLSCs overexpressing PDGF-BB enhanced bone growth in the context of alveolar bone defects. Together, these results thus indicate that PDGF-BB represents a potent means of promoting stem cell-based alveolar bone tissue regeneration.

Chitosan dispersed in aqueous solutions of acetic, glycolic, propionic or lactic acid as a thickener/stabilizer agent of O/W emulsions produced by ultrasonic homogenization

Chitosan is a natural polycationic polysaccharide with several known biotechnological functionalities, but its application in food products as ingredient or additive remains nowadays unusual. Additionally, ultrasonic production of food-grade emulsions is still an open research field, so ultrasound applicability for such purpose must be evaluated case by case. In this study, chitosan was dispersed in acid aqueous media containing acetic, glycolic, propionic or lactic acid (50 mmol·L^-1), then added of the emulsifier Tween 20, and finally mixed to sunflower oil, through ultrasonic homogenization (20 kHz, 500 W, 4 min), in order to prepare O/W emulsions (oil fraction = 0.25). In all studied systems, oil droplets with average hydrodynamic diameter < 600 nm were obtained. The increase of chitosan concentration promoted the augment in consistency and the elastic character of the emulsions. Emulsions containing more than 0.500 g·(100 g)^-1 of chitosan presented a minor increase of both oil droplets average hydrodynamic diameter and PDI, during storage for 28 days. Furthermore, such systems showed no phase separation when exposed to centrifugation, freeze-thawing, and freeze-thaw-heating cycles. Two main findings may be highlighted from this study: i) ultrasound processing is a promising approach to produce food-grade emulsified systems containing chitosan, and ii) chitosan is a suitable alternative as thickener/stabilizer for acidic emulsions, being its performance influenced by the biopolymer concentration and not by the organic acid present in the medium.

Conductive biomass-based composite wires with cross-linked anionic nanocellulose and cationic nanochitin as scaffolds

In this study, a series of conductive composite wires were successfully prepared by combining dispersions of multi-wall carbon nanotubes (MWCNTs) and TEMPO-oxidized cellulose nanofibers (TOCNFs) with different MWCNTs contents into a dispersion of partially deacetylated α-chitin nanofibers (α-DECHNs) followed with a drying process. The TOCNFs/MWCNTs/α-DECHNs composite wires were prepared by extruding the negatively charged TOCNFs/MWCNTs dispersion into the positively charged α-DECHNs dispersion. The contact of the positively charged α-DECHNs and the negatively charged TOCNFs/MWCNTs triggers the electrostatic interaction (heterocoagulation) resulting in wire-shaped conductive composites. The SEM analysis indicates this conductive composite material has a wire-like shape with a rough but tight surface. The properties of samples were characterized by a zeta potential analyzer (Zetasizer Nano), a four-probe, an electrochemical workstation, a Fourier transform infrared spectroscopy (FTIR), an X-ray diffractometer (XRD), and a thermogravimetric analyzer (TG). Besides, the conductivity and the AC impedance of TOCNFs/MWCNTs/α-DECHNs composite wires with different MWCNTs contents were also analyzed. The conductivity of the composite wire increases from 9.98 × 10^-6 S∙cm^-1 to 1.56 × 10^-3 S∙cm^-1 as the MWCNTs content raises from 3.0 wt% to 14.0 wt%. When the MWCNTs content reaches 14.0 wt%, the prepared composite wire can light up LED at a voltage of 5 V, indicating the great potential of this biomass-based conductive composite in conductive material application.

Crosstalk between chitosan and cell signaling pathways

The field of tissue engineering (TE) experiences its most exciting time in the current decade. Recent progresses in TE have made it able to translate into clinical applications. To regenerate damaged tissues, TE uses biomaterial scaffolds to prepare a suitable backbone for tissue regeneration. It is well proven that the cell-biomaterial crosstalk impacts tremendously on cell biological activities such as differentiation, proliferation, migration, and others. Clarification of exact biological effects and mechanisms of a certain material on various cell types promises to have a profound impact on clinical applications of TE. Chitosan (CS) is one of the most commonly used biomaterials with many promising characteristics such as biocompatibility, antibacterial activity, biodegradability, and others. In this review, we discuss crosstalk between CS and various cell types to provide a roadmap for more effective applications of this polymer for future uses in tissue engineering and regenerative medicine.

Synergistic effect of bovine platelet lysate and various polysaccharides on the biological properties of collagen-based scaffolds for tissue engineering: Scaffold preparation, chemo-physical characterization, in vitro and ex ovo evaluation

Crosslinked 3D porous collagen-polysaccharide scaffolds, prepared by freeze-drying, were modified with bovine platelet lysate (BPL) and evaluated in terms of chemical, physical and biological properties. Natural antibacterial polysaccharides like chitosan, chitin/chitosan-glucan complex and calcium salt of oxidized cellulose (CaOC) incorporated in collagen scaffolds affected not only chemo-physical properties of the composite scaffolds but also improved their biological properties, especially when BPL was presented. Lipophilic BPL formed microspheres in porous scaffolds while reduced by half their swelling ratio. The resistance of collagen sponges to hydrolytic degradation in water depended strongly on chemical crosslinking varying from 60 min to more than one year. According to in-vitro tests, chemically crosslinked scaffolds exhibited a good cellular response, cell-matrix interactions, and biocompatibility of the material. The combination of collagen with natural polysaccharides confirmed a significant positive synergistic effect on cultivation of cells as determined by MTS assay and PicoGreen method, as well as on angiogenesis evaluated by ex ovo Chick Chorioallantoic Membrane (CAM) assay. Contrary, modification only by BLP of pure collagen scaffolds exhibited decreased biocompatibility in comparison to unmodified pure collagen scaffold. We propose that the newly developed crosslinked collagen sponges involving bioactive additives could be used as scaffold for growing cells in systems with low mechanical loading in tissue engineering, especially in dermis replacement, where neovascularization is a crucial parameter for successful skin regeneration.