Development and optimization of dynamic gelatin/chitosan nanoparticles incorporated with blueberry anthocyanins for milk freshness monitoring

Edible blueberry anthocyanin-loaded soybean protein nanofibers/sodium alginate hydrogel beads: Freshness detection of high protein drinks

In this study, blueberry anthocyanins were embedded in soybean protein nanofibers/sodium alginate hydrogel (SNF/SA) to prepare an edible pH-responsive chromogenic hydrogel bead for freshness monitoring of milk, soybean milk and dual protein drinks. The results showed that the encapsulation rate of blueberry anthocyanins was 87.43 %. The loading of blueberry anthocyanins achieved the pH-response color development of SNF/SA hydrogel beads. SS/B3 hydrogel beads (SNF/SA loaded with 0.1 g anthocyanins) showed good color stability when stored in different environments for 96 h. When the SS/B3 hydrogel beads were used for detecting the protein drinks freshness, fresh drinks and spoiled drinks could be clearly distinguished by color of hydrogel beads. In addition, SS/B3 hydrogel beads promoted protein digestibility of protein drinks and protected anthocyanins from degradation in the stomach environment. Therefore, the hydrogel bead was accessible and edible, it could provide a possibility for monitoring the quality changes of fresh protein drinks.

Colorimetric films of carboxymethyl cellulose and sodium alginate incorporating Spirulina extract (phycobiliproteins) and gallic acid for real-time shrimp freshness monitoring

This study developed edible colorimetric films by incorporating 1 % ultrasonic-assisted aqueous extract of Spirulina platensis (UAAESP; 76.83 % protein), and 0.125-0.250 % gallic acid (GA) into 2 % carboxymethyl cellulose (CMC) and sodium alginate (SA) matrices. The films were evaluated for structural, optical, mechanical, antimicrobial, antioxidant, and calorimetric properties. UAAESP exhibited a blue-grey colour at pH 3-9 and yellowish-green at pH 10, reflecting higher UV-visible absorption. The addition of 1 % UAAESP and 0.25 % GA reduced moisture content (7.73 %), water solubility (12.06 %), and water vapor and oxygen permeability, while increasing film thickness (10.97 %) and tensile strength (38.53 %). Film opacity increased due to the blue colour of UAAESP. SEM showed homogeneous surfaces, with minor cracks in cross-sections, while FTIR confirmed strong physical interactions between CMC, SA, UAAESP, and GA. Antioxidant activity improved with UAAESP and higher GA levels, while 0.25 % GA expanded inhibition zones by 74.25 % and 81.09 % against S. aureus and E. coli. The GA not only improve the antioxidant and antimicrobial activities but also sensitize the UAAESP incorporated in the matrices to better sense the spoilage levels. The films' colour changes (blue, bluish-grey, dark grey) corresponded shrimp spoilage levels. Thus, UAAESP-GA films offer real-time freshness indicators and sustainable, recyclable alternatives to plastic packaging.

Critical Review on Anti-Obesity Effects of Anthocyanins Through PI3K/Akt Signaling Pathways

Obesity is a global health crisis and is one of the major reasons for the rising prevalence of metabolic disorders such as type 2 diabetes, cardiovascular diseases, and certain cancers. There has been growing interest in the search for natural molecules with potential anti-obesity effects; among the phytochemicals of interest are anthocyanins, which are flavonoid pigments present in many fruits and vegetables. Anthocyanins influence obesity via several signaling pathways. The PI3K/Akt signaling pathway plays a major role with a focus on downstream targets such as GLUT4, FOXO, GSK3β, and mTOR, which play a central role in the regulation of glucose metabolism, lipid storage, and adipogenesis. The influence of critical factors such as oxidative stress and inflammation also affect the pathophysiology of obesity. However, the studies reviewed have certain limitations, including variations in experimental models, bioavailability challenges, and a lack of extensive clinical validation. While anthocyanin shows tremendous potential, challenges such as poor bioavailability, stability, and regulatory matters must be overcome for successful functional food inclusion of anthocyanins. The future of anthocyanin-derived functional foods lies in their ability to overcome hurdles. Therefore, this review highlights the molecular mechanisms of obesity through the PI3K/Akt signaling pathways and explores how anthocyanins can modulate these signaling pathways to address obesity and related metabolic disorders. It also addresses some ways to solve the challenges, like bioavailability and stability, while emphasizing future possibilities for anthocyanin-based functional foods in obesity management.

Enhancing milk-based drinks with lyophilized guar gum-coated cyanidin-3-O-glucoside-loaded nano-nutriosomes: Physicochemical and antioxidant characterizations

Cyanidin-3-O-glucoside (C3G) is a flavonoid compound recognized for its diverse biological properties. It is considered one of the most promising flavonoids due to its potential health benefits. Still, its use in functional foods, particularly beverages, is limited due to degradation and instability under various environmental conditions. Recent advancements involving novel freeze-dried guar gum-coated nano-nutriosome (FD-GG-NS) carriers have demonstrated effective strategies to address these challenges. The purpose of this work was to develop and evaluate a novel freeze-dried guar gum-coated nano-nutriosomes that would improve the physicochemical stability and antioxidant activity of C3G in milk-based beverages. The results exhibited that C3G was successfully encapsulated in freeze-dried NS and GG-C3G-NS, with good encapsulation efficacy (>91.02 %) and particle sizes varied from 175.27 to 186.60 nm within a respectable range of PDI (<0.3). Firstly, to investigate the optimum concentration 0.4 % was shown to be the best concentration due to improved stability and dietary fiber content. The FD-GG-C3G-NS in milk drinks improved the color, turbidity, ζ-potential, and sensory assessment while declining apparent viscosity and acidity with improved antioxidant activity during storage for 15th days at 4 °C. Thus, integrating C3G into functional dairy drinks using guar gum-coated nano-nutriosomes has broad prospects in the food industry.

Enhancing sensitivity and stability of natural pigments in pH-responsive freshness indicators: A review

Natural pigments are an indicator component in the freshness indicator, which is advantageous due to their safety, renewability, and low cost. However, freshness indicator with natural pigments as pH indicators has the problems of low stability and the color rendering domain could not effectively cover the shelf life of food. This paper describes the types and structures of natural pigments commonly used in freshness indicators and their color change mechanisms under different pH conditions. Also, the preparation methods of natural pigments freshness indicators are reviewed. Based on the current limitations and shortcomings faced by natural pigments freshness indicators, this paper highlights optimization strategies to enhance their sensitivity and stability, including modification, co-pigmentation, natural pigments mixing, encapsulation, and metal-ion complexation. The exploitation of these optimization strategies can help develop natural pigment-based intelligent packaging with superior performance to meet the food industry's needs for quality and safety monitoring.

High water resistance starch based intelligent label for the freshness monitoring of beverages

The traditional starch-based intelligent freshness labels struggle to maintain long-term structural stability when exposed to moisture. To solve this problem, we prepared composite crosslinked labels using phytic acid for double crosslinking of corn starch and soybean isolate proteins, with anthocyanin serving as the chromogenic dye. The mechanical properties, hydrophobic characteristics, and pH responsivity of these crosslinked labels were assessed in this study. The prepared double-crosslinked labels showed reduced moisture content (15.96%), diminished swelling (147.21%), decreased solubility (28.55%), and minimized water permeability, which suggested that they have enhanced hydrophobicity and densification. The crosslinked labels demonstrated the ability to maintain morphological stability when immersed in water for 12 h. Additionally, the mechanical properties of the crosslinked labels were enhanced without compromising their pH-sensing capabilities, demonstrated a color response visible to the naked eye for milk and coconut water freshness monitoring, suggesting great potential for application in beverages freshness monitoring.

Exploring the Potential of Anthocyanins for Repairing Photoaged Skin: A Comprehensive Review

Long-term exposure to ultraviolet (UV) rays can result in skin photoaging, which is primarily characterized by dryness, roughness, pigmentation, and a loss of elasticity. However, the clinical drugs commonly employed to treat photoaged skin often induce adverse effects on the skin. Anthocyanins (ACNs) are water-soluble pigments occurring abundantly in various flowers, fruits, vegetables, and grains and exhibiting a range of biological activities. Studies have demonstrated that ACNs contribute to the repair of photoaged skin due to their diverse biological characteristics and minimal side effects. Evidence suggests that the stability of ACNs can be enhanced through encapsulation or combination with other substances to improve their bioavailability and permeability, ultimately augmenting their efficacy in repairing photoaged skin. A growing body of research utilizing cell lines, animal models, and clinical studies has produced compelling data demonstrating that ACNs mitigate skin photoaging by reducing oxidative stress, alleviating the inflammatory response, improving collagen synthesis, alleviating DNA damage, and inhibiting pigmentation. This review introduces sources of ACNs while systematically summarizing their application forms as well as mechanisms for repairing photoaged skin. Additionally, it explores the potential role of ACNs in developing functional foods. These findings may provide valuable insight into using ACNs as promising candidates for developing functional products aimed at repairing photoaged skin.

A Review of Modified Gelatin: Physicochemical Properties, Modification Methods, and Applications in the Food Field

Gelatin is a significant multifunctional biopolymer that is widely utilized as a component in food, pharmaceuticals, and cosmetics. Numerous functional qualities are displayed by gelatin, such as its exceptional film-forming ability, gelling qualities, foaming and emulsifying qualities, biocompatibility and biodegradable qualities. Due to its unique structural, physicochemical, and biochemical characteristics, which enhance nutritional content and health benefits as well as the stability, consistency, and elasticity of food products, gelatin is utilized extensively in the food business. Additionally, gelatin has demonstrated excellent performance in encapsulating, delivering, and releasing active ingredients. Gelatin's various modifications, such as chemical, enzymatic, and physical processes, were analyzed to assess their impact on gelatin structures and characteristics. Hopefully, gelatin will be more widely used in various applications after modification using suitable methods.

Development and evaluation of guar gum-coated nano-nutriosomes for cyanidin-3-O-glucoside encapsulation

Cyanidin-3-O-glucoside (C3G) is a type of water-soluble flavonoid compound that is abundantly found in fruits and vegetables. C3G possesses numerous biological activities, however, it is prone to breakdown under environmental conditions. To overcome these issues, we developed nano-nutriosome (NS) carriers created by vortex-mixing and probe-sonication techniques for C3G encapsulation in which the phospholipid and Nutriose® FB06 were chosen as carrier material, and guar gum (GG) as a coating material to formulate a unilamellar and multicompartment structure. This study aimed to develop and evaluate C3G-loaded nano-nutriosomes coated by GG (GG-C3G-NS) for improving physicochemical stability, antioxidant activity, cellular uptake, and controlled release properties. The C3G-NS and GG-C3G-NS are nanosized (143.47 to 154.13 nm), with high encapsulation efficiency (>93.31 %). The NS carriers successfully encapsulated C3G which was confirmed by transmission electron microscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy. C3G showed more stability in storage, thermal, pH, ionic, and oxidative conditions. Furthermore, the NS exhibited a better-controlled release of C3G in different food stimulant conditions and in vitro release study. Additionally, NS systems enhanced cellular uptake and showed no cytotoxicity. Overall, GG-NS could be a promising nanocarrier for improving the stability, controlled release, and antioxidant activity of bioactive compounds.

Correlations of dynamic changes in lipid and protein of salted large yellow croaker during storage

Protein and lipid are two major components that undergo significant changes during processing of aquatic products. This study focused on the protein oxidation, protein conformational states, lipid oxidation and lipid molecule profiling of salted large yellow croaker during storage, and their correlations were investigated. The degree of oxidation of protein and lipid was time-dependent, leading to an increase in carbonyl content and surface hydrophobicity, a decrease in sulfhydryl groups, and an increase in conjugated diene, peroxide value and thiobarbituric acid reactive substances value. Oxidation caused protein structure denaturation and aggregation during storage. Lipid composition and content changed dynamically, with polyunsaturated phosphatidylcholine (PC) was preferentially oxidized compared to polyunsaturated triacylglycerol. Correlation analysis showed that the degradation of polyunsaturated key differential lipids (PC 18:2_20:5, PC 16:0_22:6, PC 16:0_20:5, etc.) was closely related to the oxidation of protein and lipid. The changes in protein conformation and the peroxidation of polyunsaturated lipids mutually promote each other's oxidation process.

Formation of pH-responsive hydrogel beads and their gel properties: Soybean protein nanofibers and sodium alginate

Hydrogel beads prepared from protein nanofibers are popular because of their safety, sleek appearance, and protection of biologically active substances. However, extreme external environmental variations, such as pH and temperature, can limit their practical application. To meet the application requirements of hydrogel beads in different environments, non-covalent mixtures of CaCl2 cross-linked soybean protein nanofibers (SNF) and sodium alginate (SA) were used to prepare hydrogel beads. In the present study, the hardness (782.48 g) and elasticity of hydrogel beads formed at SNF/SA = 7:3 and CaCl2 concentration of 0.1 mol/L were the maximum. Furthermore, the water content and pH swelling also reached a peak (98.68 %, 43.85 g/g) due to the best morphology and regular internal network structure. Meanwhile, the pH-responsive hydrogel beads with added anthocyanins were able to respond to the ambient pH under different temperatures and pH conditions and maintained color stability during 96 h of storage (ΔE < 5). In this experiment, a pH-responsive hydrogel bead based on soybean protein nanofiber (SNF) and sodium alginate (SA) was prepared by simple ionic crosslinking. It provides a theoretical and experimental basis for the future application of plant protein nanofibers as pH-responsive hydrogel materials.

Development of smart packaging film incorporated with sodium alginate-chitosan quaternary ammonium salt nanocomplexes encapsulating anthocyanins for monitoring milk freshness

This study focused on the preparation, functionality, and application of smart food packaging films based on polyvinyl alcohol (PVA) and anthocyanins (ACNs) -loaded sodium alginate-chitosan quaternary ammonium salt (HACC-SA) nanocomplexes. The average encapsulation rate of anthocyanins-loaded nanocomplexes reached 62.51 %, which improved the hydrophobicity and water vapor barrier of the PVA film. FTIR confirmed that the nanocomplexes were immobilized in the PVA film matrix by hydrogen bonding, which improved the mechanical properties of the film. The SEM and XRD results demonstrated that the HACC-SA-ACNs nanocomplexes were uniformly distributed in the film matrix and the crystallinity of PVA was decreased. The P/HACC-SA-ACNs film showed a significant response to buffers of pH 2-13 and high color stability after 21 days of storage compared to the P/ACNs film. Furthermore, the color of the composite film changed from purple to red as the milk freshness decreased during 72 h of milk freshness monitoring, indicating that the P/HACC-SA-ACNs films were suitable and promising for application as smart packaging materials.

Preparation and characterization of active films based on oregano essential oil microcapsules/soybean protein isolate/sodium carboxymethyl cellulose

This study aimed to prepare oregano essential oil microcapsules (EOMs) by the active coalescence method using gelatin and sodium alginate as wall materials and oregano essential oil (OEO) as the core material. EOMs were added to the soybean protein isolate (SPI)/sodium carboxymethyl cellulose (CMC) matrix to prepare SPI-CMC-EOM active films, and the physical and chemical features of the active films and EOMs were characterized. The results showed that the microencapsulated OEO could protect its active ingredients. Scanning electron microscopy results showed that EOMs were highly compatible with the film matrix. The solubility of active films decreased upon adding EOMs, and their ultraviolet resistance and thermal stability also improved. When the added amount of EOMs was 5 %, the active films had the best mechanical properties and the lowest water vapor permeability. The active films prepared under this condition had excellent comprehensive performance. Also, adding EOMs considerably enhanced the antioxidant of the active films and endowed them with antibacterial properties. The application of the SPI-CMC-EOM films to A. bisporus effectively delayed senescence and maintained the freshness of the postharvest A. bisporus. This study provided a theoretical foundation for the incorporation of EOMs into active films based on biological materials.

Development of biomaterials based on chitosan-gelatin nanofibers encapsulated with Ziziphora clinopodioides essential oil and Heracleum persicum extract for extending the shelf-life of vacuum-cooked beef sausages

The aims of the current study were to encapsulate Ziziphora clinopodioides essential oil (ZEO, 0%, 0.15%, and 0.25%) and Heracleum persicum extract (HPE, 0%, 0.25%, and 0.5%) into the chitosan-gelatin (CH-GE) nanofibers through the electrospinning process to improve the shelf-life of vacuum-cooked beef sausages through 70 days of refrigerated storage. Scanning electron microscopy indicated that all nanofibers appeared thin, well-defined, smooth, and possessed uniform thread-like fibers without any beads or nodule formations. The Fourier transform infrared spectroscopy study confirmed the molecular interaction between encapsulated compounds and CH-GE nanofibers. The X-ray diffraction analysis of nanofibers showed an increase in crystallinity after incorporating ZEO and HPE into the polymer. Treated sausages with CH-GE-ZEO 0.25%-HPE 0.25% and CH-GE-ZEO 0.25%-HPE 0.5% showed significantly lower microbial population and lipid oxidation than the control group during the experiment period (P < 0.05). Sausages formulated with designated CH-GE nanofibers had better microbial, chemical, and sensory properties compared to sausages treated with pure ZEO/HPE during refrigerated storage. The findings also showed that treated sausages with CH-GE-ZEO 0.25%-HPE 0.5% had the highest color, odor, texture, and overall acceptability after 70 days of refrigerated storage conditions. Therefore, this treatment could be applicable for the prolonged storage conditions during cooked beef sausage production.

Advances in embedding techniques of anthocyanins: Improving stability, bioactivity and bioavailability

The health benefits of anthocyanins have attracted extensive research interest. However, anthocyanins are sensitive to certain environmental and gastrointestinal conditions and have low oral bioavailability. It has been reported that delivery systems made in different ways could improve the stability, bioavailability and bioactivity of anthocyanins. This present review summarizes the factors affecting the stability of anthocyanins and the reasons for poor bioavailability, and various technologies for encapsulation of anthocyanins including microcapsules, nanoemulsions, microemulsions, Pickering emulsions, nanoliposomes, nanoparticles, hydrogels and co-assembly with amphiphilic peptides were discussed. In particular, the effects of these encapsulation technologies on the stability, bioavailability and bioactivities of anthocyanins in vitro and in vivo experiments are reviewed in detail, which provided scientific insights for anthocyanins encapsulation methods. However, the application of anthocyanins in food industry as well as the biological fate and functional pathways in vivo still need to be further explored.

Development of smart packaging halochromic films embedded with anthocyanin pigments; recent advances

Nowadays, innovative biodegradable packaging based on pH-sensitive natural dyes is being developed. These smart systems quickly inform the food quality to the consumer and monitor fresh foods in real-time. Smart packaging protects food against ambiance risks and simultaneously sends information to users for variations and alterations in the packaging settings. Anthocyanin (ACY), among the natural dyes used as indicators serves as water-soluble flavonoid pigments which made reflection in light in the red-blue range and can detect chemical and microbial alterations in foods based on their pH-susceptible conditions; on the other hand, they have considerable antimicrobial and antioxidant functions that result in the longer shelf life of food products. They also have beneficial properties including anti-cancer and anti-inflammatory functions, avoidance of heart diseases, overweight, and diabetes. Hence, this paper deals with the characteristics of smart packaging films based on anthocyanins, as well as their application in various food industries.

Edible Gels with Cranberry Extract: Evaluation of Anthocyanin Release Kinetics

The bioactive compounds found in cranberry fruit are natural antioxidants, and their consumption reduces the risk of diabetes, cardiovascular disease, cancers, and urinary tract infections. Oral gels with cranberry fruit extract are a promising product that can ensure accurate dosage and release of the active compounds and are suitable for people with dysphagia. The aim of this study was to determine the effect of polymeric materials on the dissolution kinetics of cranberry fruit anthocyanins from gel formulations. Gel formulations were prepared using freeze-dried cranberry fruit extract with different gelling excipients: chitosan (G1-G3), sodium carboxymethylcellulose (G4-G6), and sodium carboxymethylcellulose combined with carbomers (G7-G9). The dissolution test showed that the release of anthocyanins from gel formulations G1-G6 and G9 was most intense within the first 10 min, with little change in the anthocyanin content of the acceptor medium afterwards. For the formulations based on carboxymethyl cellulose and carbomers G7 and G8, the amount of anthocyanins released into the acceptor medium gradually increased, which prolonged the release time of the active compounds. The test for the release of anthocyanins from the semi-solid systems through a hydrophilic membrane revealed that within the first hour, the total amount of anthocyanins released from the modeled gel formulations (G1-G9) was within the range of 6.02%-13.50%. The 1% chitosan (G1) gel formulation released the fastest and highest amount of anthocyanins (70% within 6 h). The other formulations showed a slower release of anthocyanins, and after 6 h, the amount of anthocyanins released from formulations G2-G9 was <57%.

Taste masking and stability improvement of Korean red ginseng (Panax ginseng) by nanoencapsulation using chitosan and gelatin

In this study, red ginseng extract (RGE)-loaded nanoparticles (NPs) were prepared by ionic gelation between chitosan (CS) and gelatin (Gel), and the physical characteristics of the RGE-loaded CS-Gel NPs (RGE-CS/Gel NPs), including particle size and polydispersity index (PDI), using different ratios of CS and Gel were examined. The particle size and PDI were 398.1 ± 41.3 nm and 0.433 ± 0.033, respectively for the optimal ratio of CS (0.075 mg/mL) and Gel (0.05 mg/mL). In vitro taste masking test and in vivo sensory evaluation using 10 panelists demonstrated that the CS/Gel NPs significantly reduced the bitter taste of RGE. Additionally, the CS/Gel NPs improved the thermal and acid stabilities, which were almost 6 and 8 times higher than those in the free RGE (p < 0.05), respectively. Likewise, our findings revealed that the RGE-CS/Gel NPs effectively maintain their inhibitory function against platelet aggregation (76.30 %) in an acidic environment. Therefore, the CS/Gel NPs can be used as a potential delivery system to mask the bitterness and improve the stability of RGE, which may enhance its application as a more palatable functional food ingredient with high anti-platelet activity.

Recent advances in pH-sensitive indicator films based on natural colorants for smart monitoring of food freshness: a review

As a new type of packaging method, natural pigment-based pH-sensitive indicator film packaging can be used to intelligently monitor food freshness, provide consumers with intuitive food freshness information, and own the advantages of small size, low cost and intuitive accuracy. Based on the introduction of the principle of natural pigment in pH-sensitive indicator film intelligent packaging, this paper reviews the types of natural pigment indicators (such as anthocyanins, curcumin) and film-forming matrix materials, and systematically discusses the research progress of their application in freshness monitoring in various foods, and points out the limitations of this intelligent packaging in practical applications. In order to provide natural pigment in the application and promotion of pH-sensitive indicator film packaging for monitoring food freshness, further research and development works are required to overcome the current limitations. The needs for further research and developments are outlined.

Exopolysaccharide riclin and anthocyanin-based composite colorimetric indicator film for food freshness monitoring

Food freshness monitoring is vital to ensure food safety. Recently, packaging materials incorporating pH-sensitive films have been employed to monitor the freshness of food products in real time. The film-forming matrix of the pH-sensitive film is essential to maintain the desired physicochemical functions of the packaging. Conventional film-forming matrices, such as polyvinyl alcohol (PVA), have drawbacks of low water resistance, poor mechanical properties, and weak antioxidant ability. In this study, we successfully synthesise PVA/riclin (P/R) biodegradable polymer films to overcome these limitations. The films feature riclin, an agrobacterium-derived exopolysaccharide. The uniformly dispersed riclin conferred outstanding antioxidant activity to the PVA film and significantly improved its tensile strength and barrier properties by forming hydrogen bonds. Purple sweet potato anthocyanin (PSPA) was used as a pH indicator. The intelligent film with added PSPA provided robust surveillance of volatile ammonia and changed its color within 30 s in the pH range of 2-12. This multifunctional colorimetric film also engendered discernible color changes when the quality of shrimp deteriorated, demonstrating its great potential as an intelligent packaging material to monitor food freshness.

Discrimination of Milk Freshness Based on Synchronous Two-Dimensional Visible/Near-Infrared Correlation Spectroscopy Coupled with Chemometrics

Milk is one of the preferred beverages in modern healthy diets, and its freshness is of great significance for product sales and applications. By combining the two-dimensional (2D) correlation spectroscopy technique and chemometrics, a new method based on visible/near-infrared (Vis/NIR) spectroscopy was proposed to discriminate the freshness of milk. To clarify the relationship be-tween the freshness of milk and the spectra, the changes in the physicochemical indicators of milk during storage were analyzed as well as the Vis/NIR spectra and the 2D-Vis/NIR correlation spectra. The threshold-value method, linear discriminant analysis (LDA) method, and support vector machine (SVM) method were used to construct the discriminant models of milk freshness, and the parameters of the SVM-based models were optimized by the grid search method and particle swarm optimization algorithm. The results showed that with the prolongation of storage time, the absorbance of the Vis/NIR spectra of milk gradually increased, and the intensity of autocorrelation peaks and cross peaks in synchronous 2D-Vis/NIR spectra also increased significantly. Compared with the SVM-based models using Vis/NIR spectra, the SVM-based model using 2D-Vis/NIR spectra had a >15% higher prediction accuracy. Under the same conditions, the prediction performances of the SVM-based models were better than those of the threshold-value-based or LDA-based models. In addition, the accuracy rate of the SVM-based model using the synchronous 2D-Vis/NIR autocorrelation spectra was >97%. This work indicates that the 2D-Vis/NIR correlation spectra coupled with chemometrics is a great pattern to rapidly discriminate the freshness of milk, which provides technical support for improving the evaluation system of milk quality and maintaining the safety of milk product quality.

Improvement of analytical method for three azo dyes in processed milk and cheese using HPLC-PDA

This study aims to develop and validate a method for simultaneously measuring three azo dyes (azorubine, brilliant black BN, lithol rubine BK) not designated in Korea. The HPLC-PDA analysis method was validated based on the ICH guidelines, and the color stability was evaluated. The milk and cheese samples were spiked with azo dyes, the correlation coefficient of calibration curve ranged from 0.999 to 1.000 and the recovery rates of azo dyes were 98.81 ∼ 115.94%, with RSD of 0.08 ∼ 3.71%. The LOD and the LOQ in milk and cheese ranged from 1.14 to 1.73 μg/mL and 3.46 to 5.25 μg/mL, respectively. In addition, the expanded uncertainties of the measurements ranged from 3.3421 to 3.8146%. The azo dyes appeared to be color stable for more than 14 days. The results indicate that this analytical method is suitable for extracting and analyzing azo dyes in milk and cheese samples, which are not permitted in Korea.

Gelatin as a bioactive nanodelivery system for functional food applications

Gelatin has long been used as an encapsulant agent in the pharmaceutical and biomedical industries because of its low cost, wide availability, biocompatibility, and degradability. However, the exploitation of gelatin for nanodelivery application is not fully achieved in the functional food filed. In this review article, we highlight the latest work being performed for gelatin-based nanocarriers, including polyelectrolyte complexes, nanoemulsions, nanoliposomes, nanogels, and nanofibers. Specifically, we discuss the applications and challenges of these nanocarriers for stabilization and controlled release of bioactive compounds. To achieve better efficacy, gelatin is frequently used in combination with other biomaterials such as polysaccharides. The fabrication and synergistic effects of the newly developed gelatin composite nanocarriers are also present.

Effects of protein and lipid oxidation on the water holding capacity of different parts of bighead carp: Eye, dorsal, belly and tail muscles

The quality of fish can change due to differences in the lipid and protein oxidation rates in different muscles. This study examined vacuum-packed eye muscle (EM), dorsal muscle (DM), belly muscle (BM), and tail muscle (TM) of bighead carp frozen for 180 days. The results reveal that EM had the highest lipid content and the lowest protein content, while DM had the lowest lipid content and the highest protein content. EM also showed the highest values of centrifugal loss and cooking loss, and the correlation analysis showed that these losses were positively correlated with dityrosine content and negatively correlated with conjugated triene content. The content of carbonyl, disulfide bond, and surface hydrophobicity of myofibrillar protein (MP) also increased with time, with DM having the highest values. The microstructure of EM was looser than other muscles. Therefore, DM had the fastest oxidation rate and EM had the lowest water holding capacity.

Antioxidant and antimicrobial collagen films incorporating Pickering emulsions of cinnamon essential oil for pork preservation

Cinnamon essential oil (CEO)-based Pickering emulsions were prepared using chitosan (CS) and soy protein isolate (SPI) colloid particles as stabilizers and genipin as cross-linker. Pickering emulsions have smaller particle sizes, higher stability, and encapsulation efficiency at a CS:SPI ratio of 1:4. The Pickering emulsion-modified collagen films showed enhanced thermal stability, UV-blocking properties, and water resistance. In addition, the antioxidant (DPPH scavenging activity, 18.35%-50.59%) and antimicrobial activities (inhibition zone, Escherichia coli, 0-1.85 cm; Staphylococcus aureus, 0-1.57 cm; Pseudomonas fluorescens, 0-1.34 cm) of the films were improved due to the sustained release of CEO, with the release kinetics following the Fickian diffusion of the Ritger-Peppas model. When the functionalized film was used for pork preservation, a four-day extension of shelf life was observed. Collectively, our findings suggest that Pickering emulsions provide great potential for the application of collagen film in pork preservation.

Engineered nanomaterials-based sensing systems for assessing the freshness of meat and aquatic products: A state-of-the-art review

Meat and aquatic products are susceptible to spoilage during distribution, transportation, and storage, increasing the urgency of freshness evaluation. Engineered nanomaterials (ENMs) typically with the diameter in the range of 1-100 nm exhibit fascinating physicochemical properties. ENMs-based sensing systems have received extensive attention for food freshness assessment due to the advantages of being fast, simple, and sensitive. This review focuses on summarizing the recent application of ENMs-based sensing systems for food freshness detection. First, chemical indicators related to the freshness of meat and aquatic products are described. Then, how to apply the ENMs including noble metal nanomaterials, metal oxide nanomaterials, carbon nanomaterials, and metal-organic frameworks for the construction of different sensing systems were described. Besides, the recent advance in ENMs-based colorimetric, fluorescent, electrochemical, and surface-enhanced Raman spectroscopy sensing systems for assessing the freshness of meat and aquatic products were outlined. Finally, the challenges and future research perspectives for the application of ENMs-based sensing systems were discussed. The ENMs-based sensing systems have been demonstrated as effective tools for freshness evaluation. The sensing performance of ENMs employed in different sensing systems depends on their composition, size, shape, and stability of nanoparticles. For the real application of ENMs in food industries, the risks and regulatory issues associated with nanomaterials need to be further considered. With the continuous development of nanomaterials and sensing devices, the ENMs-based sensors are expected to be applied in-field for rapid detection of the freshness of meat and aquatic products in the future.

Fabrication of Chitosan/Hydroxyethyl Cellulose/TiO2 Incorporated Mulberry Anthocyanin 3D-Printed Bilayer Films for Quality of Litchis

In this study, a bilayer antibacterial chromogenic material was prepared using chitosan (CS) and hydroxyethyl cellulose (HEC) as inner substrate, mulberry anthocyanins (MA) as a natural tracer, and titanium dioxide nanoparticles (nano-TiO₂)/CS:HEC as a bacteriostatic agent for the outer layer. By investigating their apparent viscosity and suitability for 3D printing links, the optimal ratio of the substrates was determined to be CS:HEC = 3:3. Viscosity of the CH was moderate. The printing process was consistent and exhibited no breakage or clogging. The printed image was highly stable and not susceptible to collapse and diffusion. Scanning electron microscopy and infrared spectroscopy indicated that intermolecular binding between the substances exhibited good compatibility. Titanium dioxide nanoparticles (nano-TiO₂) were evenly distributed in the CH and no agglomeration was observed. The inner film fill rates affected the overall performance of the chromogenic material, with strong inhibitory effects against Escherichia coli and Staphylococcus aureus at different temperatures, as well as strong color stability. The experimental results indicated that the double-layer antibacterial chromogenic material can, to a certain extent, extend the shelf life of litchi fruit and determine the extent of its freshness. Therefore, from this study, we can infer that the research and development of active materials have a certain reference value.

Development of an Indicator Film Based on Cassava Starch-Chitosan Incorporated with Red Dragon Fruit Peel Anthocyanin Extract

The increase in new technology and consumer demand for healthy and safe food has led to the development of smart packaging to help consumers understand food conditions in real time. The incorporation of red dragon fruit peel anthocyanin into cassava starch and chitosan films was used in this study as a color indicator to monitor food conditions. This indicator film was generated using the solvent-casting method. The mechanical, morphological, and physicochemical characterizations of the film were studied, and food freshness monitoring was carried out. The results showed that adding red dragon fruit peel anthocyanin increased up to 94.44% of the antioxidant activity. It also improved its flexibility, indicated by the lowest tensile strength (3.89 ± 0.15 MPa) and Young's modulus (0.14 ± 0.01 MPa) and the highest elongation at break (27.62 ± 0.57%). The indicator film was sensitive to pH, which was indicated by its color change from red to yellow as pH increased. The color of the film also changed when it was used to test the freshness of packaged shrimp at both room and chiller temperatures. According to the results, the indicator film based on cassava starch-chitosan incorporated with red dragon fruit peel anthocyanin showed its potential as a smart packaging material.

A sub-freshness monitoring chitosan/starch-based colorimetric film for improving color recognition accuracy via controlling the pH value of the film-forming solution

The demand for intelligent packaging in food sub-freshness monitoring is increasing. Herein, a pH and NH3 responsing colorimetric film (PS-CH-LCA) was fabricated based on potato starch (PS), chitosan (CH) and Lonicera caerulea L. anthocyanins (LCA) via controlling the pH value of the film-forming solution, and was applied to the real-time monitoring of shrimp freshness. The PS-CH-LCA pH 2.5 film exhibited the highest tensile strength (6.43 MPa), the lowest water solubility (33.11%) and the most sensitive color responsiveness. Morphological and structural results revealed that CH was attached to the surface of PS via hydrogen bond, and anthocyanins were well immobilized in the film-forming matrix. The sensitive color change and its high correlation with spoilage indices demonstrated the PS-CH-LCA pH 2.5 film well indicated fresh, sub-fresh, spoiled level of shrimp. The results solved the limitation of chitosan-based packaging films in undistinguishable colorimetric endpoints, providing a new strategy for indicating the sub-freshness of food packaging.

Incorporation of gelatin and Fe2+ increases the pH-sensitivity of zein-anthocyanin complex films used for milk spoilage detection

In this study, blueberry anthocyanins, gelatin and Fe²⁺ were incorporated into zein matrix via electrospinning method to prepare colorimetric indicator films for monitoring milk freshness. Gelatin and Fe²⁺ were incorporated into the film to improve visual discrimination of indicator films' color changes in milk with different freshness degrees and in solution with pH 3-7. Results of SEM, FT-IR and XRD showed that there were intermolecular hydrogen bonds among components, which associated with the larger color difference of indicator films. UV-vis spectral analysis showed that blueberry anthocyanin solutions containing both gelatin and Fe²⁺ displayed the highest intensity absorption peaks. The optimal ability to distinguish the pH (3-7) of solutions was presented by the indicator film incorporating gelatin (1% (w/v)) and Fe²⁺ (0.07 mg/mL). Gelatin and Fe²⁺ increased the color-responsive sensitivity of the indicator film to pH. The film could be successfully used to detect the freshness of milk, whose color changes were visually perceivable: from purple black (fresh milk) to royal purple (spoiling milk) and then to violet red (spoiled milk). The color parameters (L*, a*, R, G and B) of the film revealed a high correlation with the pH/acidity of the milk during storage. The successful application of the indicator film embedding gelatin and Fe²⁺ for monitoring milk quality changes indicated that the addition of special substances could provide great potential for monitoring freshness and preparing intelligent packaging of food.

A review on colorimetric indicators for monitoring product freshness in intelligent food packaging: Indicator dyes, preparation methods, and applications

Intelligent food packaging system exhibits enhanced communication function by providing dynamic product information to various stakeholders (e.g., consumers, retailers, distributors) in the supply chain. One example of intelligent packaging involves the use of colorimetric indicators, which when subjected to external stimuli (e.g., moisture, gas/vapor, electromagnetic radiation, temperature), display discernable color changes that can be correlated with real-time changes in product quality. This type of interactive packaging system allows continuous monitoring of product freshness during transportation, distribution, storage, and marketing phases. This review summarizes the colorimetric indicator technologies for intelligent packaging systems, emphasizing on the types of indicator dyes, preparation methods, applications in different food products, and future considerations. Both food and nonfood indicator materials integrated into various carriers (e.g., paper-based substrates, polymer films, electrospun fibers, and nanoparticles) with material properties optimized for specific applications are discussed, targeting perishable products, such as fresh meat and fishery products. Colorimetric indicators can supplement the traditional "Best Before" date label by providing real-time product quality information to the consumers and retailers, thereby not only ensuring product safety, but also promising in reducing food waste. Successful scale-up of these intelligent packaging technologies to the industrial level must consider issues related to regulatory approval, consumer acceptance, cost-effectiveness, and product compatibility.

Effect of Purple Corn Anthocyanin on Antioxidant Activity, Volatile Compound and Sensory Property in Milk During Storage and Light Prevention

The aim of this study was to observe the effect of purple corn anthocyanin on the light-induced antioxidant activity, free radicals, volatile compounds, color parameters, and sensory properties of milk during storage. There were four groups: (1) negative control, no addition of anthocyanins + exposure to fluorescent light (NC); (2) positive control 1, no addition of anthocyanins + protected from fluorescent light (PC1); (3) positive control 2, the addition of 0.3% (w/v) anthocyanins + exposure to fluorescent light (PC2); and (4) the addition of 0.3% anthocyanins + protected from fluorescent light (AC). The results indicated that the concentration of antioxidant activity parameters in the NC group decreased during the entire storage period, whereas antioxidant activity parameters were unchanged except for the glutathione peroxidase (GSH-Px) in the AC group. Moreover, the NC group showed lower levels of 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and higher levels of superoxide anion and hydrogen peroxide than the other groups after 1 d of storage period. The extent of malondialdehyde accumulation and lipid peroxidation in the control groups were greater than that of the AC group. Twenty-two volatile compounds were determined in milk, which consisted of eight alcohols, three ketones, five aldehydes, two esters, and four hydrocarbons by headspace gas chromatography mass spectrometer analysis. Specifically, individual aldehydes, esters and hydrocarbons in the AC group remained at relatively stable values during storage relative to the other three groups. Stronger positive correlations were detected between several antioxidant activities (superoxide dismutase, GSH-Px) and DPPH scavenging activity as well as total ketones in milk. Adding of anthocyanin did not impact on the color values of L^*, a^* and b^* in light-protected milk during the entire storage period. Some sensory evaluation parameters (flat, garlic/onion/weedy, oxidized-light, oxidized-metal, rancid) in AC group were significantly higher than that of the control group at the end of the period. In conclusion, the current study revealed that the addition of purple corn anthocyanin pigment to light-protected milk had the potential to prevent lipid oxidation, enhance antioxidant activity, maintain volatile compounds and increase the sensory scores.

Controlled release of dinotefuran with temperature/pH-responsive chitosan-gelatin microspheres to reduce leaching risk during application

Neonicotinoid-based pesticides are extensively used owing to their broad insecticidal spectrum and activity. We developed neonicotinoid dinotefuran (DIN)-loaded chitosan-gelatin microspheres using a spray-drying technology, resulting in a pH- and temperature-responsive controlled-release system. Upon introducing chitosan into the triple-helix structure of gelatin, the physically modified gelatin microspheres became smooth, round, and solid, improving their thermal storage stability. The spray-drying parameters were optimized using three-dimensional surface plots. When scaled up under optimal conditions, the corresponding loading content and encapsulation efficiency were 21.5% and 98.17%, respectively. Compared with commercial dinotefuran granules, our biodegradable composite carriers achieved the immobilization of dinotefuran to reduce pesticide leaching by 5.57-19.89% in soil, improved the soil half-life of DIN, and improved its cumulative absorption by plants. Therefore, the microspheres showed better efficacy against Trialeurodes vaporariorum. Our results confirm that this simple approach can improve the utilization efficiency of neonicotinoids, decrease leaching loss, and promote ecological safety.

Recent advances of chitosan-based nanoparticles for biomedical and biotechnological applications

Chitosan is a natural alkaline polysaccharide, which widely exists in marine crustaceans such as shrimp and crab, has been shown to have various biological activities. It has attracted considerable attention in biomedicine and nanomaterials fields because of its excellent properties, such as biocompatibility, biodegradability, non-toxicity and easy access. In addition, because of active hydroxyl and amino groups in chitosan molecules, different functional groups can be introduced into chitosan molecules by molecular modification or chemical modification, which extends their applications. Nanoparticles with small size and large surface area can be used as diagnostic and therapeutic tools in the biomedical field, which make it easier to understand, detect and treat human diseases. The nanomaterials based on chitosan have important applications in biomedicine, industry, pharmacy, agriculture, and other fields. This review highlights the recent advances on chitosan-based nanoparticles for antibacterial property, drug and gene delivery, cancer and hyperthermia therapy, cell imaging, restorative dentistry, wound healing, tissue engineering and other biomedical fields. The nanotechnology fields involving biosensors, water treatment, food industry and agriculture are also briefly reviewed.

Recent advances in the fabrication of pH-sensitive indicators films and their application for food quality evaluation

Over a few decades, anthocyanin (ACN)-based colorimetric indicators in intelligent packaging systems have been widely used to monitor the freshness or spoilage of perishable food products. Most of the perishable food products are highly susceptible to enzymatic/microbial spoilage and produce several volatile or nonvolatile organic acid and nitrogenous compounds. As a result, the natural pH of fresh foods significantly changes. Fabrication of CAN-based colorimetric indicators in intelligent packaging systems is an advanced technique that monitors the freshness or spoilage of perishable foods based on the display of color variations at varying pH values. This study focuses on the advancement of pH-sensitive indicators and extraction of colorimetric indicators from commercially available natural sources. Moreover, the fabrication techniques and widespread industrial applications of such indicators have also been discussed. In addition, readers will get information about the color-changing and antioxidant mechanisms of ACN-based indicator films in food packaging.

Development and characterization of aldehyde-sensitive cellulose/chitosan/beeswax colorimetric papers for monitoring kiwifruit maturity

In this study, we developed an in-package colorimetric paper to monitor the ripeness of kiwifruit by detecting the release of aldehydes. Strongly hydrophobic composite films were prepared using chitosan as the matrix and beeswax as an additive. A piece of cellulose paper containing methyl red and bromocresol violet as color indicators was heat-sealed between two hydrophobic films to protect the indicators from the effects of fruit respiration and transpiration. The nucleophilic addition reaction between aldehydes and OH^- (Cannizzaro reaction) changes the pH in the paper and triggers a color change in the indicators. As the kiwifruit ripens, the colorimetric paper changes from bluish-purple to dark red and then gradually to red. A mobile phone application was further used to measure the RGB values and link them to kiwifruit ripeness. This intelligent paper can be used for the accurate and convenient monitoring of produce in real time.

Identification of Anthocyanins and Their Fouling Mechanisms during Non-Thermal Nanofiltration of Blueberry Aqueous Extracts

Organic fouling in the nanofiltration (NF) process, which is a non-thermal technology to recover active components, is a critical problem limiting its applications. This study seeks to identify the anthocyanins on the NF membrane and explore their fouling mechanisms during concentration of blueberry extracts. Seven kinds of monomeric anthocyanins in foulants-delphinidin-3-O-galactoside, delphinidin-3-O-glucoside, delphinidin-3-O-arabinoside, cyanidin-3-O-galactoside, petunidin-3-O-galactoside, peonidin-3-O-glucoside, and malvidin-3-O-glucoside-were identified. Moreover, chalcone, myricetin derivative, and an unknown substance with [M⁺H]⁺ at m/z 261.1309, which is the fragment ion corresponding to the break of glycoside bond of anthocyanins, were obtained. Interactions between anthocyanins and membrane made from polyamide were principally governed by the CH-π and π-π stacking of aromatic rings, the establishment of hydrogen bonds, and electrostatic interaction. This study will be helpful to further control fouling and choice of cleaning agents in concentration of anthocyanins-rich extracts.