All-biobased transparent-wood: A new approach and its environmental-friendly packaging application

Transparent Wood Fabrication and Applications: A Review

Wood cellulose is an abundant bio-based resource with diverse applications in construction, cosmetics, packaging, and the pulp and paper industries. Transparent wood (TW) is a novel, high-quality wood material with several advantages over traditional transparent materials (e.g., glass and plastic). These benefits include renewability, UV shielding, lightweight properties, low thermal expansion, reduced glare, and improved mechanical strength. TW has significant potential for various applications, including transparent roofs, windows, home lighting structures, electronic devices, home decoration, solar cells, packaging, smart packaging materials, and other high-value-added products. The mechanical properties of TW, such as tensile strength and optical transmittance, are typically up to 500 MPa (Young's modulus of 50 GPa) and 10-90%, respectively. Fabrication methods, wood types, and processing conditions significantly influence the mechanical and optical properties of TW. In addition, recent research has highlighted the feasibility of TW and large-scale production, making it an emerging research topic for future exploration. This review attempted to provide recent and updated manufacturing methods of TW as well as current and future applications. In particular, the effects of structural modification through various chemical pretreatment methods and impregnation methods using various polymers on the properties of TW biocomposites were also reviewed.

A Comparison of the Optical Properties of Fibre-Based Luminescent Solar Concentrators and Transparent Wood Towards Sustainable Waveguides

Aiming at net-zero emissions, most international and national policies focus on sustainable development goals. Hence, there is an immediate need for replacing carbon-intensive materials with biomaterials. In this respect, this article presents a road-map for moving from polymeric to sustainable waveguides in optical devices. Previous reports indicate that luminescent fibres exhibit better photon concentrations of nearly 30%-33% higher than flat-plate polymeric waveguides. It is also verified that the photon in-out ratio increases by 3.44 times when the waveguide geometry is changed from planar to an equivalent area of fibre bundle with the same luminophore. Meanwhile, transparent wood (Twood) is gaining attention as a green alternative to acrylic sheets. The structure and function of transparent wood conforms well with the fibre-based waveguides of luminescent solar concentrators (LSCs). Therefore, it is intriguing to compare Twood with intrinsic micro fibrillary interior with fibre-based LSC as a natural alternative. This review provides an in-depth analysis, emphasizing the benefits and associated challenges in using cylindrical concentrators over planar LSCs. The paper collects and compares the phenomenon of light guiding of cylindrical and fibre-based LSCs with that of Twood. It is important to consider the key points discussed here while making a transition towards sustainable waveguides.

Current progress in functionalization of cellulose nanofibers (CNFs) for active food packaging

There is a growing interest in utilizing renewable biomass resources to manufacture environmentally friendly active food packaging, against the petroleum-based polymers. Cellulose nanofibers (CNFs) have received significant attention recently due to their sustainability, biodegradability, and widely available sources. CNFs are generally obtained through chemical or physical treatment, wherein the original surface chemistry and interfacial interactions can be changed if the functionalization process is applied. This review focuses on promising and sustainable methods of functionalization to broaden the potential uses of CNFs in active food packaging. Novel aspects, including functionalization before, during and after cellulose isolation, and functionalization during and after material processing are addressed. The CNF-involved structural construction including films, membranes, hydrogels, aerogels, foams, and microcapsules, is illustrated, which enables to explore the correlations between structure and performance in active food packaging. Additionally, the enhancement of CNFs on multiple properties of active food packaging are discussed, in which the interaction between active packaging systems and encapsulated food or the internal environment are highlighted. This review emphasizes novel approaches and emerging trends that have the potential to revolutionize the field, paving the way for advancements in the properties and applications of CNF-involved active food packaging.

Tannin Removal of Cashew Apple Juice by Powdered Gelatin Treatment and Its Utilization in Bacterial Cellulose Production

In this study, cashew apple juice was treated with different levels of powdered gelatin (2%, 5%, and 10%) to remove tannins. The results showed that the addition of 5% gelatin removed 99.2% of condensed tannins while did not affect reducing sugars of juice. Subsequently, tannin-free cashew apple juice (CA) was aerobically fermented for 14 days with Komagataeibacter saccharivorans strain 1.1 (KS) and Gluconacetobacter entanii HWW100 (GE) in comparison with Hestrin-Schramm (HS) medium as control. The dry weight of bacterial cellulose (BC) obtained from the KS strain (2.12 and 1.48 g/L for CA and HS media, respectively) was higher than that from the GE strain (0.69 and 1.21 g/L for CA and HS media, respectively). Although GE showed low BC production yield, its viability in both media after 14-day fermentation was notable (6.06-7.21 log CFU/mL) compared to KS strain (1.90-3.30 log CFU/mL). In addition, the XRD and FT-IR analysis showed that there was no significant difference in the crystallinity and functional groups of BC films when cultured on CA and HS medium, while the morphology by SEM exhibited the phenolic molecules on the film surface. Cashew apple juice has been shown to be a viable and cost-effective medium for the BC production.

Advanced hydrostable, recyclable and degradable cellulose hybrid films as renewable alternatives to synthetic plastics

Strong, tough and sustainable materials are in high demand in various engineering applications. We demonstrate a potential sustainable hybrid film made from natural cellulose and a biobased slurry. Through a simple and scalable approach, cellulose can be processed into an advanced material with over 2.8 and 9.2-fold increase in dry strength and toughness after curing and a 728-fold increase in wet strength, respectively. In addition, these hybrid composite films display an outstanding antioxidant activity surpassing 90 %, along with excellent ultraviolet radiation shielding and thermal insulation properties. Further, the hybrid films can be fabricated by integrating all-natural materials and still guarantee their unique functionality. We also demonstrate the feasibility of a circular bioeconomy by recycling the hybrid film using a green, deep eutectic solvent to fabricate a recycled hybrid film that displays excellent mechanical and optical properties. When recycling is unsuitable or economical, the hybrid film can naturally degrade in the soil under 6 months. These encouraging findings suggest the promise of cellulose hybrid films as a renewable, low-cost, tough, and strong material with the potential to replace nonrenewable synthetic plastics and products.

The impact of transparent packaging: how transparent packaging for organic foods affects tourists' green purchasing behavior

Previous studies have shown that transparent packaging can influence consumer behavior, but the impact on tourists' environmentally friendly purchase intentions is not well-understood. This study conducted four experiments with 1,513 participants to explore the role of transparent packaging in tourists' willingness to engage in green purchasing. Factors such as ecological concern, nature connectedness, and environmental consequences were also examined. The results showed that transparent packaging significantly enhanced tourists' purchase intentions and that ecological concern, nature connectedness, and environmental consequences had a significant influence on these intentions. These findings contribute to understanding the packaging paradox and its relationship with tourists' green purchasing behavior. The study has implications for the food retail industry and the promotion of sustainable development in scenic areas, suggesting that transparent packaging can effectively enhance tourists' purchase intentions for green products. Understanding factors like ecological concern and nature connectedness can also provide valuable insights for the industry to improve marketing strategies and promote environmentally friendly choices among tourists.

Advances in Sol-Gel-Based Superhydrophobic Coatings for Wood: A Review

As the focus of architecture, furniture, and other fields, wood has attracted extensive attention for its many advantages, such as environmental friendliness and excellent mechanical properties. Inspired by the wetting model of natural lotus leaves, researchers prepared superhydrophobic coatings with strong mechanical properties and good durability on the modified wood surface. The prepared superhydrophobic coating has achieved functions such as oil-water separation and self-cleaning. At present, some methods such as the sol-gel method, the etching method, graft copolymerization, and the layer-by-layer self-assembly method can be used to prepare superhydrophobic surfaces, which are widely used in biology, the textile industry, national defense, the military industry, and many other fields. However, most methods for preparing superhydrophobic coatings on wood surfaces are limited by reaction conditions and process control, with low coating preparation efficiency and insufficiently fine nanostructures. The sol-gel process is suitable for large-scale industrial production due to its simple preparation method, easy process control, and low cost. In this paper, the research progress on wood superhydrophobic coatings is summarized. Taking the sol-gel method with silicide as an example, the preparation methods of superhydrophobic coatings on wood surfaces under different acid-base catalysis processes are discussed in detail. The latest progress in the preparation of superhydrophobic coatings by the sol-gel method at home and abroad is reviewed, and the future development of superhydrophobic surfaces is prospected.

Effects of UV radiation on natural and synthetic materials

The deleterious effects of solar ultraviolet (UV) radiation on construction materials, especially wood and plastics, and the consequent impacts on their useful lifetimes, are well documented in scientific literature. Any future increase in solar UV radiation and ambient temperature due to climate change will therefore shorten service lifetimes of materials, which will require higher levels of stabilisation or other interventions to maintain their lifetimes at the present levels. The implementation of the Montreal Protocol and its amendments on substances that deplete the ozone layer, controls the solar UV-B radiation received on Earth. This current quadrennial assessment provides a comprehensive update on the deleterious effects of solar UV radiation on the durability of natural and synthetic materials, as well as recent innovations in better stabilising of materials against solar UV radiation-induced damage. Pertinent emerging technologies for wood and plastics used in construction, composite materials used in construction, textile fibres, comfort fabric, and photovoltaic materials, are addressed in detail. Also addressed are the trends in technology designed to increase sustainability via replacing toxic, unsustainable, legacy additives with 'greener' benign substitutes that may indirectly affect the UV stability of the redesigned materials. An emerging class of efficient photostabilisers are the nanoscale particles that include oxide fillers and nanocarbons used in high-performance composites, which provide good UV stability to materials. They also allow the design of UV-shielding fabric materials with impressive UV protection factors. An emerging environmental issue related to the photodegradation of plastics is the generation of ubiquitous micro-scale particles from plastic litter exposed to solar UV radiation.

H2O2 Solution Steaming Combined Method to Cellulose Skeleton for Transparent Wood Infiltrated with Cellulose Acetate

Hydrogen peroxide (H2O2) steaming, a green and highly efficient delignification method, has been demonstrated to provide a wood skeleton with a very low content of residual lignin in the manufacturing of transparent wood. It usually requires a long reaction time and a large amount of H2O2 because the piece of wood is treated using steaming equipment. Herein, a H2O2 solution steaming method was developed for the highly efficient removal of lignin from wood. Specifically, several wood samples were simultaneously immersed in a hot H2O2 solution to obtain delignified wood with a relatively high content of residual lignin, which provided a high strength and preserved the cellulose skeleton. Subsequently, the delignified wood with a relatively high content of residual lignin was further treated with H2O2 steam to obtain a very low lignin delignified wood. Compared with the previous H2O2 steaming method, the reaction time and used H2O2 volume of the H2O2 solution steaming method was reduced by 37.3% and 52.7%, respectively. All-biomass transparent wood could be obtained by infiltrating the delignified wood with cellulose acetate, which showed both a high transmittance of 83.0% and a low thermal conductivity of 0.30 Wm−1K−1.

Emerging Engineered Wood for Building Applications

The building sector, including building operations and materials, was responsible for the emission of ∼11.9 gigatons of global energy-related CO₂ in 2020, accounting for 37% of the total CO₂ emissions, the largest share among different sectors. Lowering the carbon footprint of buildings requires the development of carbon-storage materials as well as novel designs that could enable multifunctional components to achieve widespread applications. Wood is one of the most abundant biomaterials on Earth and has been used for construction historically. Recent research breakthroughs on advanced engineered wood products epitomize this material's tremendous yet largely untapped potential for addressing global sustainability challenges. In this review, we explore recent developments in chemically modified wood that will produce a new generation of engineered wood products for building applications. Traditionally, engineered wood products have primarily had a structural purpose, but this review broadens the classification to encompass more aspects of building performance. We begin by providing multiscale design principles of wood products from a computational point of view, followed by discussion of the chemical modifications and structural engineering methods used to modify wood in terms of its mechanical, thermal, optical, and energy-related performance. Additionally, we explore life cycle assessment and techno-economic analysis tools for guiding future research toward environmentally friendly and economically feasible directions for engineered wood products. Finally, this review highlights the current challenges and perspectives on future directions in this research field. By leveraging these new wood-based technologies and analysis tools for the fabrication of carbon-storage materials, it is possible to design sustainable and carbon-negative buildings, which could have a significant impact on mitigating climate change.

Palladium Nanoparticle-Loaded Mesostructural Natural Woods for Efficient Water Treatment

Natural wood with oriented microchannels and unique multi-level structures is an ideal candidate for making water treatment membranes. Here, palladium nanoparticles are loaded into different kinds of natural woods and the degradation property of the wood membranes for organic pollutants are investigated. The water flux of hardwoods is significantly higher than that of softwood due to the existence of large vessel elements. For the single pollutant, both hardwood and softwood show high degradation efficiency for methylene blue and methylene orange, while the degradation efficiency of the softwoods for 4-nitrophenol is significantly higher than that of the hardwoods due to their lower water flux. For the mixed pollutants, all the wood membranes have a good degradation property for different concentrations of methylene blue in polluted water, while the degradation efficiency of high concentration methylene orange and 4-nitrophenol is low. Our work will provide some guidance for the degradation of organic pollutants in actual polluted water.

Green, Sustainable Architectural Bamboo with High Light Transmission and Excellent Electromagnetic Shielding as a Candidate for Energy-Saving Buildings

Currently, light-transmitting, energy-saving, and electromagnetic shielding materials are essential for reducing indoor energy consumption and improving the electromagnetic environment. Here, we developed a cellulose composite with excellent optical transmittance that retained the natural shape and fiber structure of bamboo. The modified whole bamboo possessed an impressive optical transmittance of approximately 60% at 6.23 mm, illuminance of 1000 luminance (lux), water absorption stability (mass change rate less than 4%), longitudinal tensile strength (46.40 MPa), and surface properties (80.2 HD). These were attributed to not only the retention of the natural circular hollow structure of the bamboo rod on the macro, but also the complete bamboo fiber skeleton template impregnated with UV resin on the micro. Moreover, a multilayered device consisting of translucent whole bamboo, transparent bamboo sheets, and electromagnetic shielding film exhibited remarkable heat insulation and heat preservation performance as well as an electromagnetic shielding performance of 46.3 dB. The impressive optical transmittance, mechanical properties, thermal performance, and electromagnetic shielding abilities combined with the renewable and sustainable nature, as well as the fast and efficient manufacturing process, make this bamboo composite material suitable for effective application in transparent, energy-saving, and electromagnetic shielding buildings.

Effect of Bleaching and Hot-Pressing Conditions on Mechanical Properties of Compressed Wood

This paper reports on multiple stage bleaching and its effect on the mechanical and swelling properties of compressed wood (CW). The natural wood specimen was bleached with NaClO₂ in five steps and three hot-pressing conditions. Their effects were investigated in morphologies: lignin content, alpha-cellulose content, compression ratio, mechanical properties, swelling and, water contact angle. After compression, the wood specimens became dense and the most porous structures collapsed. The lignin content decreased as the bleaching steps progressed, and the highest alpha-cellulose content was observed at the third bleaching step. This CW showed the best mechanical properties: bending strength was 240.1 ± 35.7 MPa, and Young’s modulus was 23.08 ± 0.89 Gpa. The CW swelling decreased as the bleaching step progressed, and was associated with the density decrease and the compression ratio increase with the bleaching step. The B3 is an optimum bleaching step that accounts for the best mechanical properties, which might be associated with the highest alpha-cellulose content.

Environmental effects of stratospheric ozone depletion, UV radiation, and interactions with climate change: UNEP Environmental Effects Assessment Panel, Update 2021

The Environmental Effects Assessment Panel of the Montreal Protocol under the United Nations Environment Programme evaluates effects on the environment and human health that arise from changes in the stratospheric ozone layer and concomitant variations in ultraviolet (UV) radiation at the Earth's surface. The current update is based on scientific advances that have accumulated since our last assessment (Photochem and Photobiol Sci 20(1):1-67, 2021). We also discuss how climate change affects stratospheric ozone depletion and ultraviolet radiation, and how stratospheric ozone depletion affects climate change. The resulting interlinking effects of stratospheric ozone depletion, UV radiation, and climate change are assessed in terms of air quality, carbon sinks, ecosystems, human health, and natural and synthetic materials. We further highlight potential impacts on the biosphere from extreme climate events that are occurring with increasing frequency as a consequence of climate change. These and other interactive effects are examined with respect to the benefits that the Montreal Protocol and its Amendments are providing to life on Earth by controlling the production of various substances that contribute to both stratospheric ozone depletion and climate change.

In Situ Construction of Thermotropic Shape Memory Polymer in Wood for Enhancing Its Dimensional Stability

The extension of wood to a wider field has been restrained significantly due to its dimensional instability that arises from variation in moisture content, which in turn brings about the risk of cracking, warping or distortion. This work proposed a novel strategy to stabilize wood by means of the in situ construction of a thermotropic shape memory polymer (SMP) inside wood. The cross-linked copolymer network (PMP) with good shape memory behavior was first investigated based on the reaction of methyl methacrylate (MMA) and polyethylene glycol diacrylate (PEGDA) in a water/ethanol solution; then, the PMP was constructed inside wood via vacuum-pressure impregnation and in situ polymerization. The weight gain, volume increment and morphology observations clearly revealed that the PMP was mainly present in wood cell lumens, cell walls and pits. The presence of PMP significantly enhanced the dimensional stability of and reduced the cracks in wood. The desirable shape recovery abilities of PMP under heating-cooling cycles were considered to be the main reasons for wood dimensional stabilization, because it could counteract the internal stress or retard the shrinkage of cell walls once water was evaporated from the wood. This study provided a novel and reliable approach for wood modification.

Reversible Photo-, Thermal-, and pH-Responsive Functionalized Wood with Fluorescence Emission

A reversible photo-, thermal-, and pH-responsive high-performance functional wood with fluorescence has been prepared. The properties, structure, multi-response, fluorescence, water resistance, and corrosion resistance of original wood (ORW) and functional wood (FUW) were investigated with an X-ray photoelectron spectroscopy (XPS) spectrometer, a Fourier-transform infrared (FTIR) spectrometer, a N₂ adsorption–desorption analyzer, an atomic force microscope (AFM), tensile tests, a scanning electron microscope (SEM), an ultraviolet–visible (UV–Vis) spectrophotometer, a fluorescence spectrometer, the equilibrium swelling ratio (ESR), and corrosion tests. The results of XPS, FTIR, N₂ adsorption–desorption, and AFM exhibited that FUW was successfully prepared. Additionally, the results of the tensile test and SEM revealed that FUW had better mechanical properties than ORW, due to the filling of epoxy resin in the pores of the wood. Moreover, the UV–Vis and fluorescence spectra demonstrated that the introduction of epoxy resin induced multi-response and fluorescence functions to FUW. Furthermore, the data of ESR and corrosion test showed that the introduction of epoxy resin greatly improved the water and corrosion resistance of wood. This study provides ideas and methods for preparing novel high-performance multi-response FUW.

Toward Strong and Tough Wood-Based Hydrogels for Sensors

The purpose of this research is to develop strong and tough wood-based hydrogels, which are reinforced by an aligned cellulosic wood skeleton. The hypothesis is that improved interfacial interaction between the wood cell wall and a polymer is of great importance for improving the mechanical performance. To this end, a facile and green approach, called ultraviolet (UV) grafting, was performed on the polyacrylamide (PAM)-infiltrated wood skeleton without using initiators. An important finding was that PAM-grafted cellulose nanofiber (CNF) architectures formed in the obtained hydrogels under UV irradiation, where CNFs themselves serve as both initiators and cross-linkers. Moreover, an alkali swelling treatment was utilized to improve the accessibility of the wood cell wall before UV irradiation and thus facilitate grafting efficiency. The resulting alkali-treated Wood-g-PAM hydrogels exhibited significantly higher tensile properties than those of the Wood/PAM hydrogel and were further assembled into conductive devices for sensor applications. We believe that this UV grafting strategy may facilitate the development of strong wood-based composites with interesting features.

Plastic Food Packaging: Perceptions and Attitudes of Portuguese Consumers about Environmental Impact and Recycling

The use of plastics for packaging has some advantages, since they are flexible and inexpensive. However, most plastics are of single use, which, combined with low recycling or reuse ratios, contributes substantially to environmental pollution. This work is part of a project studying the habits of Portuguese citizens concerning plastic food packaging and focuses on aspects related to sustainability. The survey was carried out via an online questionnaire about sustainability, recycling, and knowledge of the effects of plastic materials or their residues on the environment. The results were obtained based on a statistical analysis of the data. The participants tend to think about the negative impact of plastic packages on the environment; 39% sometimes do not buy plastic; and 30% try to look for alternatives. A substantial fraction, 81%, support the avoidance of plastic utensils and reduction in the use of plastic bags. Most participants have a good knowledge of recycling and strongly agree with the use of recycled materials, and 87% of respondents practice separation of different types of waste for recycling. Changing plastic consumption habits has not been an easy task. Nevertheless, it is expected that society will increasingly move toward sustainable habits, questioning its actions and considering their impact on the environment.