Physicochemical features of ultra-high viscosity alginates

Alginate-metal cation interactions: Macromolecular approach

Alginates are a broad family of linear (unbranched) polysaccharides derived from brown seaweeds and some bacteria. Despite having only two monomers, i.e. β-d-mannuronate (M) and its C5 epimer α-l-guluronate (G), their blockwise arrangement in oligomannuronate (..MMM..), oligoguluronate (..GGG..), and polyalternating (..MGMG..) blocks endows it with a rather complex interaction pattern with specific counterions and salts. Classic polyelectrolyte theories well apply to alginate as polyanion in the interaction with monovalent and non-gelling divalent cations. The use of divalent gelling ions, such as Ca2+, Ba2+ or Sr2+, provides thermostable homogeneous or heterogeneous hydrogels where the block composition affects both macroscopic and microscopic properties. The mechanism of alginate gelation is still explained in terms of the original egg-box model, although over the years some novel insights have been proposed. In this review we summarize several decades of research related to structure-functionships in alginates in the presence of non-gelling and gelling cations and present some novel applications in the field of self-assembling nanoparticles and use of radionuclides.

Ultrasound-assisted extraction of alginic acid from Sargassum angustifolium harvested from Persian Gulf shores using response surface methodology

In this study, the extraction and characterization of alginic acid, the most abundant compound among brown algae were investigated. The used algae were Sargassum angustifolium from the family of brown algae native to the coasts of the Persian Gulf. The effect of temperature, time, algae mass to solvent volume ratio, and ultrasonic power on the extraction yield and ratio of monomers (M/G) was investigated using the central composite design method. Moreover, the effect of the mentioned parameters on the poly dispersity index and cytotoxic effects against breast cancer cells were also investigated. The maximum obtained extraction yield was 46 %, which was higher than those reported for algae in tropical climates. This shows the effectiveness of ultrasound in facilitating the extraction process. In addition, the minimum monomer ratio was 0.45, the minimum poly dispersity index was 2.5 and the maximum cytotoxicity for using the extract on breast cancer cell line (MCF-7) was 20.3 % (with alginic acid concentration of 250 micrograms per milliliter).

The Interphase Gas-Solid Synthesis of Ammonium Alginate-The Comparison of Two Synthesis Methods and the Effect of Low Molecular Weight Electrolyte Presence

This paper presents a method for the synthesis of ammonium alginate by interphase gas-solid reaction. It was confirmed by FTIR ATR spectroscopy analysis that a full substitution of acid groups by ammonium groups on the surface of powdered alginic acid was performed. Comparative studies on the properties of ammonium alginate solutions obtained by interphase reaction with those prepared by the classical method of dissolving alginic acid in an ammonia solution showed that the rheological properties of the solutions from these two derivatives do not differ significantly. Moreover, it was shown that aqueous solutions of ammonium alginate are more stable over time than solutions of sodium alginate. It was confirmed that ammonium alginate and sodium alginate are typical polyelectrolytes, as the addition of a low molecular weight electrolyte to their solutions resulted in a decrease in viscosity.

Pharmacological and Biological Study of Microencapsulated Probucol-Secondary Bile Acid in a Diseased Mouse Model

Probucol (PB) is a highly lipophilic drug with potential protective effects on pancreatic β-cells from inflammation and oxidation. PB has poor bioavailability and solubility, and despite many attempts, significant improvement in antidiabetic effects or absorption has yet to be discovered. Recently, the role of bile acids has been established in significant drug formulation stabilisation effects and as cell-penetrating agents. Promising results in pharmaceutical formulation studies on drug stability and release patterns when lithocholic acid (LCA) is conjugated with PB and sodium alginate (SA) have been demonstrated. Thus, this study aimed to develop and characterise PB microcapsules incorporating LCA and examine the biological effects of the microcapsules in vitro and in vivo. PB/LCA microcapsules were prepared using an encapsulation method, ionic gelation vibrational jet flow technology. LCA incorporation in PB microcapsules showed positive effects on β-cells with improved insulin release, antioxidant activity, and PB intracellular uptake. Diabetic mice gavaged LCA-PB microcapsules showed a significant reduction in diabetes signs and symptoms, better survival rate, reduced blood glucose levels, and pro-inflammatory cytokines, with an increase PB level in blood and tissues suggesting a potential therapy for treating diabetes mellitus.

Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies

INTRODUCTION

Oral delivery is the most common administrated drug delivery path. However, oral administration of lipophilic drugs has some limitations: they have poor dose-response due to low and varied dissolution kinetics and oral bioavailability with sub-optimal dissolution within the aqueous gastrointestinal microenvironment. Therefore, there is a need for robust formulating methods that protect the drug until it reaches to its optimum absorption site, allowing its optimum pharmacological effects via increasing its intestinal permeation and bioavailability.

AREA COVERED

Herein, we provide insights on orally administered lipophilic drug delivery systems. The detailed description of the obstacles associated with the oral bioavailability of lipophilic drugs are also discussed. Following this, techniques to overcome these obstacles with much emphasis on optimal safety and efficacy are addressed. Newly designed ionic vibrational jet flow encapsulation technology has enormous growth in lipophilic drug delivery systems, which is discussed thereafter.

EXPERT OPINION

Researchers have shown interest in drug's encapsulation. A combination of drug-bile acid and microencapsulation methods can be one promising strategy to improve the oral delivery of lipophilic drugs. However, the most critical aspect of this approach is the selection of bile acids, polymer, and encapsulation technology.

Pharmacological and Advanced Cell Respiration Effects, Enhanced by Toxic Human-Bile Nano-Pharmaceuticals of Probucol Cell-Targeting Formulations

Bile acids have recently been studied for potential applications as formulation excipients and enhancers for drug release; however, some bile acids are not suitable for this application. Unconjugated lithocholic acid (ULCA) has recently shown drug formulation-stabilizing and anti-inflammatory effects. Lipophilic drugs have poor gut absorption after an oral dose, which necessitates the administration of high doses and causes subsequent side effects. Probucol (PB) is a highly lipophilic drug with poor oral absorption that resulted in restrictions on its clinical prescribing. Hence, this study aimed to design new delivery systems for PB using ULCA-based matrices and to test drug formulation, release, temperature, and biological effects. ULCA-based matrices were formulated for PB oral delivery by applying the jet-flow microencapsulation technique using sodium alginate as a polymer. ULCA addition to new PB matrices improved the microcapsule’s stability, drug release in vitro (formulation study), and showed a promising effect in ex vivo study (p < 0.05), suggesting that ULCA can optimize the oral delivery of PB and support its potential application in diabetes treatment.

Functional identification of alginate lyase from the brown alga Saccharina japonica

Despite the progress in massive gene analysis of brown algal species, no alginate-degrading enzyme from brown alga has been identified, impeding the understanding of alginate metabolism in brown alga. In the current study, we identified and characterized alginate lyase from Saccharina japonica using a protein-based approach. First, cDNA library was prepared from the S. japonica sporophyte. Expression screening was then performed; the encoding gene was identified and cloned; and the recombinant enzyme was purified and characterized. Alginate lyase production in algal tissues was evaluated by western blotting. The identified alginate lyase, SjAly (359 amino acids, with a predicted N-terminal secretion signal of 27 residues), is encoded by an open reading frame comprising seven exons. Recombinant SjAly exhibited endolytic alginate lyase activity, specifically toward stretches of consecutive β-D-mannuronic acid units. The optimum temperature, pH, and NaCl concentration were 30 °C, pH 8.0, and 100 mM, respectively. SjAly exhibited pronounced activity below 20 °C, the S. japonica growth temperature. SjAly was highly expressed in the blade but not the stipe and rhizoid. The data indicate that S. japonica possesses at least one active alginate lyase. This is the first report of a functional alginate lyase from brown alga, the major natural alginate producer.

Cyclic fractionation process for Saccharina latissima using aqueous chelator and ion exchange resin

A new approach to process Saccharina latissima algal biomass was developed using sodium citrate and a polyvalent cation-specific resin to sequentially extract the alginate into several usable fractions. The fractionation was performed in a cyclic manner, utilizing a stepwise removal of the native polyvalent ions present in the algae to isolate fractions of alginate with different solubility in the presence of these ions. Sodium citrate was used in different concentrations in the extraction solution to remove polyvalent cations to adjust the alginate liberation while AMBERLITE IRC718 resin was added to further remove these ions and regenerate the extraction solution. Alginate was recovered by acid precipitation and analyzed for its uronic acid composition and molecular weight, and the carbohydrate compositions of the insoluble and soluble parts of the algal biomass residue were determined. Finally, the fractionation method was assessed with a life cycle analysis to determine the energy and water efficiency as well as the greenhouse gas emissions and the results were compared to conventional alkaline extraction. The results indicate that the energy and water use as well as the emissions are considerably lower for the cyclic extraction in comparison with the conventional methods.

3D printing of hydrogels in a temperature controlled environment with high spatial resolution

There is great hope in 3D printing techniques to create patient specific scaffolds for therapeutic applications. The majority of these approaches rely on materials that both give support to cells and effectively mimic a tissue specific microenvironment. Hydrogels provide an exceptional support for cells but their physicochemical properties are not suited for conventional additive layer manufacturing. Their low viscosity and resulting fluidic nature inhibit voluminous 3D deposition and lead to crude printing accuracy. To enhance mechanical features, hydrogels are often chemically modified and/or mixed with additives; however it is not clear whether these changes induce effects on cellular behavior or if in vivo applications are at risk. Certainly it increases the complexity of scaffold systems. To circumvent these obstacles, we aimed for a 3D printing technique which is capable of creating scaffolds out of unmodified, pure hydrogels. Here we present a new method to produce alginate scaffolds in a viscosity- independent manner with high spatial resolution. This is achieved by printing in a sub-zero environment which leads to fast freezing of the hydrogels, thus preserving the printed shape and circumventing any viscosity dependent flows. This enables the user to create scaffolds which are able to reflect soft or stiff cell niches.

Structural Characterization of Sodium Alginate and Calcium Alginate

Alginate readily aggregates and forms a physical gel in the presence of cations. The association of the chains, and ultimately gel structure and mechanics, depends not only on ion type, but also on the sequence and composition of the alginate chain that ultimately determines its stiffness. Chain flexibility is generally believed to decrease with guluronic residue content, but it is also known that both polymannuronate and polyguluronate blocks are stiffer than heteropolymeric blocks. In this work, we use atomistic molecular dynamics simulation to primarily explore the association and aggregate structure of different alginate chains under various Ca(2+) concentrations and for different alginate chain composition. We show that Ca(2+) ions in general facilitate chain aggregation and gelation. However, aggregation is predominantly affected by alginate monomer composition, which is found to correlate with chain stiffness under certain solution conditions. In general, greater fractions of mannuronic monomers are found to increase chain flexibility of heteropolymer chains. Furthermore, differences in chain guluronic acid content are shown to lead to different interchain association mechanisms, such as lateral association, zipper mechanism, and entanglement, where the mannuronic residues are shown to operate as an elasticity moderator and therefore promote chain association.

Effects of kelp phenolic compounds on the feeding-associated mobility of the herbivore snail Tegula tridentata

Tegula tridentata, is a common herbivore gastropod inhabiting the subtidal Lessonia trabeculata kelp forest, which tends to show higher densities after kelp harvesting. We investigated if harvested kelp beds may harbor higher densities of herbivore invertebrates, and the underlying mechanisms. Thus, we evaluated if the exudates of L. trabeculata change the seawater levels of soluble phenols, known to have a deterrent effect against the feeding behavior of some herbivore invertebrates. Finally we investigated whether the increase in T. tridentata densities in harvested kelp grounds could be related to a decrease in the seawater levels of soluble phenols. Our results showed that the density of invertebrate herbivores increased up to 32% in harvested kelp grounds. We provide the first estimate of the rate of phenolic exudation by L. trabeculata, and we demonstrate that T. tridentata changes its food dependent movement in the presence of exudates with synthetic phloroglucinol. We suggest that the recovery of harvested kelp ecosystems can be jeopardized by increased herbivory triggered by water-borne changes in the levels of herbivore deterrent compounds.

Stability and Release Kinetics of an Advanced Gliclazide-Cholic Acid Formulation: The Use of Artificial-Cell Microencapsulation in Slow Release Targeted Oral Delivery of Antidiabetics

Introduction

In previous studies carried out in our laboratory, a bile acid (BA) formulation exerted a hypoglycaemic effect in a rat model of type-1 diabetes (T1D). When the antidiabetic drug gliclazide (G) was added to the bile acid, it augmented the hypoglycaemic effect. In a recent study, we designed a new formulation of gliclazide-cholic acid (G-CA), with good structural properties, excipient compatibility and exhibits pseudoplastic-thixotropic characteristics. The aim of this study is to test the slow release and pH-controlled properties of this new formulation. The aim is also to examine the effect of CA on G release kinetics at various pH values and different temperatures.

Method

Microencapsulation was carried out using our Buchi-based microencapsulating system developed in our laboratory. Using sodium alginate (SA) polymer, both formulations were prepared: G-SA (control) and G-CA-SA (test) at a constant ratio (1:3:30), respectively. Microcapsules were examined for efficiency, size, release kinetics, stability and swelling studies at pH 1.5, pH 3, pH 7.4 and pH 7.8 and temperatures of 20 and 30 °C.

Results

The new formulation is further optimised by the addition of CA. CA reduced microcapsule swelling of the microcapsules at pH 7.8 and pH 3 at 30 °C and pH 3 at 20 °C, and, even though microcapsule size remains similar after CA addition, percent G release was enhanced at high pH values (pH 7.4 and pH 7.8, p < 0.01).

Conclusion

The new formulation exhibits colon-targeted delivery and the addition of CA prolonged G release suggesting its suitability for the sustained and targeted delivery of G and CA to the lower intestine.

Biocompatible coating of encapsulated cells using ionotropic gelation

The technique of immunoisolated transplantation has seen in the last twenty years improvements in biocompatibility, long term stability and methods for avoidance of fibrosis in alginate capsules. However, two major problems are not yet solved: living cellular material that is not centered in the capsule is not properly protected from the hosts’ immune system and the total transplant volume needs to be reduced. To solve these problems, we present a method for applying fully biocompatible alginate multilayers to a barium-alginate core without the use of polycations. We report on the factors that influence layer formation and stability and can therefore provide data for full adjustability of the additional layer. Although known for yeast and plant cells, this technique has not previously been demonstrated with mammalian cells or ultra-high viscous alginates. Viability of murine insulinoma cells was investigated by live-dead staining and live cell imaging, for murine Langerhans’ islets viability and insulin secretion have been measured. No hampering effects of the second alginate layer were found. This multi-layer technique therefore has great potential for clinical and in vitro use and is likely to be central in alginate matrix based immunoisolated cell therapy.

UHV-alginate as matrix for neurotrophic factor producing cells--a novel biomaterial for cochlear implant optimization to preserve inner ear neurons from degeneration

HYPOTHESIS

Ultra high viscous (UHV-) alginate is a suitable matrix for brain-derived neurotrophic factor (BDNF) producing cells, enabling cell survival and BDNF release out of the matrix and subsequent protection of auditory neuronal cells.

BACKGROUND

Cochlear implant (CI) target cells, spiral ganglion cells (SGC), undergo a progressive degeneration. BDNF prevents SGC from degeneration but has to be delivered locally to the inner ear for months. A permanent growth factor application may be realized via a cell-based drug delivery system. Encapsulation of this delivery system into a matrix could avoid immune response of the recipient, migration, and uncontrolled proliferation of the cells.

METHODS

NIH3T3-fibroblasts producing endogenous BDNF were incorporated in UHV-alginate. The survival of the cells in the alginate was examined by cell counts of cryogenic slices, and the BDNF production was determined by performing ELISA. The supernatant of the alginate-cell culture was added to primary SGC culture, and the neuroprotective effect of the produced BDNF was observed performing SGC counts.

RESULTS

BDNF-producing cells cultivated in UHV-alginate survived for up to 30 days, which was the latest time point observed. The BDNF concentration in cell culture medium, produced from in UHV-alginate incorporated fibroblasts and released out of the alginate matrix into the medium, was significantly increased after 30 days of cultivation. Supernatant of 7 days incubated UHV-alginate containing NIH3T3/BDNF cells significantly increased the SGC survival in vitro.

CONCLUSION

This study demonstrates UHV-alginate to be a suitable scaffold for BDNF-producing fibroblasts. UHV-alginates are a promising biomaterial for cochlear implant biofunctionalization.

Magnetic separation of encapsulated islet cells labeled with superparamagnetic iron oxide nano particles

Islet cell transplantation is a promising option for the restoration of normal glucose homeostasis in patients with type 1 diabetes. Because graft volume is a crucial issue in islet transplantations for patients with diabetes, we evaluated a new method for increasing functional tissue yield in xenogeneic grafts of encapsulated islets. Islets were labeled with three different superparamagnetic iron oxide nano particles (SPIONs; dextran-coated SPION, siloxane-coated SPION, and heparin-coated SPION). Magnetic separation was performed to separate encapsulated islets from the empty capsules, and cell viability and function were tested. Islets labeled with 1000 μg Fe/ml dextran-coated SPIONs experienced a 69.9% reduction in graft volume, with a 33.2% loss of islet-containing capsules. Islets labeled with 100 μg Fe/ml heparin-coated SPIONs showed a 46.4% reduction in graft volume, with a 4.5% loss of capsules containing islets. No purification could be achieved using siloxane-coated SPIONs due to its toxicity to the primary islets. SPION labeling of islets is useful for transplant purification during islet separation as well as in vivo imaging after transplantation. Furthermore, purification of encapsulated islets can also reduce the volume of the encapsulated islets without impairing their function by removing empty capsules.

Microbial and algal alginate gelation characterized by magnetic resonance

Advanced magnetic resonance (MR) relaxation and diffusion correlation measurements and imaging provide a means to non-invasively monitor gelation for biotechnology applications. In this study, MR is used to characterize physical gelation of three alginates with distinct chemical structures; an algal alginate, which is not O-acetylated but contains poly guluronate (G) blocks, bacterial alginate from Pseudomonas aeruginosa, which does not have poly-G blocks, but is O-acetylated at the C2 and/or C3 of the mannuronate residues, and alginate from a P. aeruginosa mutant that lacks O-acetyl groups. The MR data indicate that diffusion-reaction front gelation with Ca(2+) ions generates gels of different bulk homogeneities dependent on the alginate structure. Shorter spin-spin T(2) magnetic relaxation times in the alginate gels that lack O-acetyl groups indicate stronger molecular interaction between the water and biopolymer. The data characterize gel differences over a hierarchy of scales from molecular to system size.

Application of flow field-flow fractionation for the characterization of macromolecules of biological interest: a review

An overview is given of the recent literature on (bio) analytical applications of flow field-flow fractionation (FlFFF). FlFFF is a liquid-phase separation technique that can separate macromolecules and particles according to size. The technique is increasingly used on a routine basis in a variety of application fields. In food analysis, FlFFF is applied to determine the molecular size distribution of starches and modified celluloses, or to study protein aggregation during food processing. In industrial analysis, it is applied for the characterization of polysaccharides that are used as thickeners and dispersing agents. In pharmaceutical and biomedical laboratories, FlFFF is used to monitor the refolding of recombinant proteins, to detect aggregates of antibodies, or to determine the size distribution of drug carrier particles. In environmental studies, FlFFF is used to characterize natural colloids in water streams, and especially to study trace metal distributions over colloidal particles. In this review, first a short discussion of the state of the art in instrumentation is given. Developments in the coupling of FlFFF to various detection modes are then highlighted. Finally, application studies are discussed and ordered according to the type of (bio) macromolecules or bioparticles that are fractionated.