Fluorescent sensors for the detection of hydrazine in environmental and biological systems: Recent advances and future prospects

A water-soluble red-emitting fluorescence probe for detecting hazardous hydrazine in environmental waters and biosystems

Hydrazine (N2H4), a crucial chemical raw material, enhances people's lives and fosters human progress. Hydrazine usage or leakage has caused environmental contamination, affecting water, soil, and living beings. Hydrazine simultaneously presents a possible risk to human health due to its carcinogenic properties. Thus, quick and precise detection of hydrazine is crucial in environmental studies and biological contexts. We prepared a red-emitting fluorescence turn-on probe (XT-HZ) to detect hydrazine specifically. The probe has a low detecting limit for hydrazine (63 nM) with excitation wavelength at 570 nm and emission wavelength at 625 nm. Besides, the probe XT-HZ had excellent water solubility, high selectivity, and good sensitivity for detecting hydrazine. Finally, probe XT-HZ was applied in the imaging of N2H4 in living cells, zebrafish and environmental water samples.

A new carbazole based fluorescent probe with AIE characteristic for detecting and imaging hydrazine in living cells, mungbean sprouts, Arabidopsis thaliana, and practical samples

In this study, we report a new carbazole-malononitrile fluorescent probe CBC with an interesting aggregation-induced emission (AIE) characteristic. Probe CBC could rapidly and selectively detect hydrazine (N2H4) in ～100% aqueous media, and also exhibit an exceedingly low detection limit of 6.3 nM for sensitively detecting N2H4. The sensing mechanism of CBC towards N2H4 has been well demonstrated through the spectra of 1H NMR, HRMS and FTIR. Interestingly, probe CBC was applied to visualize and detect gaseous and aqueous N2H4 with sensitive color changes. Importantly, probe CBC was applied to effectively detect N2H4 in practical samples such as soil, human serum, human urine, plants, foods and beverages, as well as sensitively sense and image N2H4 in biological systems including living mungbean sprouts, Arabidopsis thaliana, and HeLa cells.

Turn-on Coumarin Precursor: From Hydrazine Sensor to Covalent Inhibition and Fluorescence Detection of Rabbit Muscle Aldolase

Hydrazine, a highly toxic compound, demands sensitive and selective detection methods. Building upon our previous studies with pre-coumarin OFF-ON sensors for fluoride anions, we extended our strategy to hydrazine sensing by adapting phenol protecting groups (propionate, levulinate, and γ-bromobutanoate) to our pre-coumarin scaffold. These probes reacted with hydrazine, yielding a fluorescent signal with low micromolar limits of detection. Mechanistic studies revealed that hydrazine deprotection may be outperformed by a retro-Knoevenagel reaction, where hydrazine acts as a nucleophile and a base yielding a fluorescent diimide compound (6,6'-((1E,1'E)-hydrazine-1,2diylidenebis(methaneylylidene))bis(3(diethylamino)phenol, 7). Additionally, our pre-coumarins unexpectedly reacted with primary amines, generating a fluorescent signal corresponding to phenol deprotection followed by cyclization and coumarin formation. The potential of compound 3 as a theranostic Turn-On coumarin precursor was also explored. We propose that its reaction with ALDOA produced a γ-lactam, blocking the catalytic nucleophilic amine in the enzyme's binding site. The cleavage of the ester group in compound 3 induced the formation of fluorescent coumarin 4. This fluorescent signal was proportional to ALDOA concentration, demonstrating the potential of compound 3 for future theranostic studies in vivo.

Activating Interfacial Electron Redistribution in Lattice-Matched Biphasic Ni3N-Co3N for Energy-Efficient Electrocatalytic Hydrogen Production via Coupled Hydrazine Degradation

The development of high-purity and high-energy-density green hydrogen through water electrolysis holds immense promise, but issues such as electrocatalyst costs and power consumption have hampered its practical application. In this study, we present a promising solution to these challenges through the use of a high-performance bifunctional electrocatalyst for energy-efficient hydrogen production via coupled hydrazine degradation. The biphasic metal nitrides with highly lattice-matched structures are deliberately constructed, forming an enhanced local electric field between the electron-rich Ni3N and electron-deficient Co3N. Additionally, Mn is introduced as an electric field engine to further activate electron redistribution. Our Mn@Ni3N-Co3N/NF bifunctional electrocatalyst achieves industrial-grade current densities of 500 mA cm-2 at 0.49 V without degradation, saving at least 53.3 % energy consumption compared to conventional alkaline water electrolysis. This work will stimulate the further development of metal nitride electrocatalysts and also provide new perspectives on low-cost hydrogen production and environmental protection.

A novel dual-responsive colorimetric/fluorescent probe for the detection of N2H4 and ClO- and its application in environmental analysis and bioimaging

Hydrazine (N2H4) and hypochlorite (ClO-) are both reactive chemical substances extensively utilized across various industrial domains. Excessive hydrazine (N2H4) and hypochlorite (ClO-) can pose significant risks to the environment, ecosystems, and human health. In order to assess and control the environmental hazard caused by N2H4 and ClO-, there is an imperative need for efficient methods capable of rapid and precise detection of these contaminants. This paper introduces a novel dual-responsive colorimetric/fluorescent probe (MDT) for the detection of N2H4 and ClO- in environmental and biological samples. The probe exhibits turn-on fluorescent responses to N2H4 or ClO- with low detection limits (N2H4: 8 nM; ClO-: 15 nM), large Stokes shifts (N2H4: 175 nm; ClO-: 203 nm), short response time (N2H4: 4 min; ClO-: 5 s) and broad pH range (5-10). In practical applications, MDT has been successfully employed in detecting N2H4 and ClO- in water and soil samples from diverse locations. Test strips loaded with MDT offer a visual and convenient means to track N2H4 vapor and quantify N2H4 and ClO- concentrations in solutions. Finally, MDT has been utilized for sensing N2H4 and ClO- in Arabidopsis thaliana roots and living zebrafish. This study presents a promising tool for monitoring N2H4 and ClO- in the environment and living organisms.

Electrophilicity Modulation for Sub-ppm Visualization and Discrimination of EDA

Precise and timely recognition of hazardous chemical substances is of great significance for safeguarding human health, ecological environment, public security, etc., especially crucial for adopting appropriate disposition measures. Up to now, there remains a practical challenge to sensitively detect and differentiate organic amines with similar chemical structures with intuitive analysis outcomes. Here, a unique optical probe with two electrophilic recognition sites for rapid and ultra-sensitive ratiometric fluorescence detection of ethylenediamine (EDA) is presented, while producing distinct fluorescence signals to its structural analog. The probe exhibits ppb/nmol level sensitivity to liquidous and gaseous EDA, specific recognition toward EDA without disturbance to up to 28 potential interferents, as well as rapid fluorescence response within 0.2 s. By further combining the portable sensing chip with the convolutional algorithm endowed with image processing, this work cracked the problem of precisely discriminating the target and non-targets at extremely low concentrations.

A wireless fluorescent sensing device for on-site closed-loop detection of hydrazine levels in the environment

Given the extensive need for the detection of hydrazine (N2H4) in the biomedical and chemical-pharmaceutical sectors, there is a necessity to devise a fast, sensitive, specific, and portable technique for precisely quantifying hydrazine at environmental levels. In our work, an "OFF-ON" type fluorescent probe namely 2-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)isoindole-1,3-dione (NAP), which was inspired by the "Gabriel" reaction, was synthesized. The NAP fluorescent cellulose film successfully achieved the detection of hydrazine vapor with a LOD = 0.658 ppm. Compared to previous qualitative methods for detecting hydrazine, this study successfully achieved quantitative identification of hydrazine at low concentrations. In addition, a portable sensor device based on NAP cellulose film was successfully integrated, enabling ultra-sensitive, wireless, remote, and real-time detection of N2H4 vapor. It was determined that the probe (NAP) exhibited excellent detection performance when applied to various environmental samples including distilled water, tap water, creek water, soil and plants. This study introduces a potentially effective approach for detecting hydrazine in real-world settings.

Construction of Co-ZIF-derived CoS2@Cu hollow heterogeneous nanotube array for the detection of hydrazine in environmental water samples

As a neurotoxin, it is necessary to establish a low cost, stable and sensitive method for the quantitative detection of hydrazine. Using Co-ZIF (zeolite imidazole framework) nanorods as precursor, CoS2 hollow nanotube array heterogeneous structure loaded with Cu nanoparticles were prepared on carbon cloth (CC) by etching, calcination and plasma magnetron sputtering (CoS2@Cu HNTA/CC). As a self-supporting electrode, its hollow heterogeneous structure provides a large area of electron transfer channel for the oxidation of the food pollutant hydrazine. In addition, bimetallic synergies and in situ N doping regulated the electronic structure of CoS2@Cu HNTA/CC, and thus significantly improved the electrical conductivity and catalytic activity. As an efficient hydrazine sensor with a wide linear range of 1 μM L-1-10 mM (1 μM-1 mM and 1 mM-10 mM), its sensitivity and the limit of detection are 7996 μA mM-1 cm-2, 3772 μA mM-1 cm-2 and 0.276 μM (S/N = 3), respectively. This study provides a new strategy for the construction of MOFs (Metal Organic Framework)-derived bimetallic composites and their application in electrochemical sensing.

Phenothiazine-based fluorescent probes for the detection of hydrazine in environment and living cells

As an important chemical raw material, hydrazine brings convenience to people's lives and provides opportunities for human development. However, the misuse or leakage of hydrazine has brought pollution to the environment, including water, soil and living organisms. At the same time, hydrazine poses a potential threat to human health as a carcinogen. Despite the enormous challenges, it is crucial to develop an effective method to detect hydrazine in environmental samples. In this work, we have synthesized a series of probes based on phenothiazine fluorophore by the introduction of different substituents and developed a novel probe for the detection of hydrazine. The probe is capable of detecting hydrazine in aqueous solutions with high sensitivity and selectivity, and can be easily fabricated into paper test strips for use in in situ samples. In addition, the probe is effective in detecting hydrazine in water, soil, cells, and zebrafish, providing an excellent tool for detecting hydrazine in the environment.

Engineering a "turn-on" NIR fluorescent sensor-based hydroxyphenyl benzothiazole with a cinnamoyl unit for hydrazine and its environmental and in-vitro applications

Hydrazine (N2H4), a chemical compound widely used in various industrial applications, causes significant environmental and biological hazards. Therefore, it is crucial to develop methodologies for the visualization and real time tracking of N2H4. In this regard, we have constructed a novel near-infrared fluorescent probe (HBT-Cy) that can effectively detect N2H4 in various samples. HBT-Cy contains 2-(2'-hydroxyphenyl)benzothiazole (HBT), cinnamoyl (Cy), and pyridinium (Py) moieties. Importantly, HBT-Cy exhibits a rapid, selective, and highly sensitive response to N2H4. This response results in the release of HBT-Py and the generation of considerable colorimetric changes along with a significant NIR (near infrared) fluorescence signal, peaking at 685 nm. Advantages of this system include turn on NIR fluorescence with large Stokes shift, (approximately 171 nm), low limit of detection (LOD = 0.11 μM) and quantum yield (0.211). The probe with low cytotoxic behavior demonstrates strong NIR fluorescence imaging capabilities to visualize endogenous and exogenous N2H4 in live cells. This mitochondria-targetable probe shows effective subcellular localization. These results suggest that HBT-Cy is a valuable probe for tracking and investigating the behavior of N2H4 in biological systems and environmental samples.

Unique Reaction-Based Polynorbornene Sensing Probes for Ultrasensitive Detection of Hydrazine in Both Environmental and Biological Systems

Hydrazine-mediated formation of 1,4-phthalazinedione analogues from phthalimide-like components has been utilized to formulate fluorescent probe NorTh. A turn-on fluorescent process has been evaluated to detect hydrazine in a highly selective manner by a small molecular probe NorTh and its homopolymer Poly-NorTh. Both these probes have been evaluated as excellent candidates for nanomolar level detection of hydrazine with a time frame of <15 min, which is rapid in terms of real application. Due to the reaction-based detection process, we have achieved high selectivity for our probes toward the identification of hydrazine in the presence of metal ions, anions, amino acids, and various amines. Limit of detection values are 16 and 35 nM for NorTh and Poly-NorTh, respectively, which are well below the permissible limit given by WHO and EPA. Poly-NorTh has been utilized to detect hydrazine in environmental water samples, soil samples, and biological samples to establish the applicability of our probes in real-field scenarios. We introduce an easy-to-synthesize, cheap, and small molecular probe and its polymer for ultrafast, highly selective, and sensitive detection of hydrazine in all possible mediums to counter the hydrazine toxicity through fluorescence turn-on signal output.

Myricetin-based fluorescence probes with AIE and ESIPT properties for detection of hydrazine in the environment and fingerprinting

BACKGROUND

Hydrazine (N2H4) is a highly toxic and versatile chemical raw material, which poses a serious threat to the environment and human health when used in large quantities. However, the traditional methods for the detection of N2H4 have the disadvantages of time-consuming, complicated operation and expensive instruments. In contrast, fluorescence probes have many advantages, such as simple operation, high sensitivity, good selectivity, and fast response time. Therefore, there is an urgent need for a fluorescence probe that can rapidly and accurately detect the presence of N2H4 and monitor the changes in its concentration.

RESULTS

For this purpose, we designed and synthesized a series of myricetin fluorescence probes 3-(substituent group)-5,7-dimethoxy-4-oxo-2-(3,4,5-trimethoxy. phenyl)-4H-chromen-4-one (Myr-R) for N2H4 detection. In the presence of N2H4, the probe 5,7-dimethoxy-3-(2,3,4,5,6-pentafluorobenzoate)-2-(3,4,5-trimethoxyphen-yl). -4H-chr-omen-4-one (Myr-3) shows significant fluorescence changes, double emission properties and a large Stokes shift (183 nm), and exhibits high selectivity and sensitivity to N2H4 (The detection limit is 93 nM). Importantly, the qualitative and quantitative analysis of N2H4 in water, soil, and air can be accomplished using fluorescence, smartphone, and UV lamps coupled with Myr-3. In addition, Myr-3 can be used for monitoring and imaging intracellular N2H4. Meanwhile, the fluorophore 3-hydroxy-5,7-dimethoxy-2-(3,4,5-trimethoxyphenyl)-4H-benzopyran-4-one (Myr-Me) was applied to fingerprinting of different substrate materials due to the fact that it exhibits strong yellow fluorescence emission in the solid state and shows excellent contrast and high resolution.

SIGNIFICANCE

The probe Myr-3 is not only able to rapidly detect N2H4 in complex environments, but also can be used for imaging intracellular N2H4. In addition, the fluorophore Myr-Me can be used as an effective imaging agent for visual fingerprinting. These properties enable the probe Myr-3 and the fluorophore Myr-Me for a wide range of potential applications in related fields.

A responsive organic probe based photoelectrochemical sensor for hydrazine detection

This study developed a new photoelectrochemical (PEC) sensor for the detection of the hydrazine (N2H4, HZ) based on a donor-π-bridge-acceptor (D-π-A) configuration organic photoactive dye (Dye-HZ). The dye was covalently immobilized on an FTO/TiO2 (FTO: fluorine-doped tin oxide) substrate, resulting in a photoanode FTO/TiO2/Dye-HZ that exhibits a specific PEC response to N2H4. Hydrazine reacts with the acetyl group in the Dye-HZ molecule, leading to its removal and the formation of a hydroxy group. The hydroxy group dissociates a hydrogen ion, forming a phenoxide anion with strong electron-donating characteristics. As a result, the dye molecule exhibits a strong intramolecular charge transfer effect, significantly enhancing absorbance and photoelectric response under visible light irradiation, leading to a remarkable increase in photocurrent and enabling highly sensitive detection of hydrazine. Furthermore, the PEC sensor demonstrates excellent selectivity and can be applied for the detection of hydrazine in real water samples. This study presents an innovative PEC sensing approach for hydrazine based on responsive photoactive molecules, providing new insights for PEC detection of other environmental pollutants.

Eu-MOF based fluorescence probe for ratiometric and visualization detection of Cu2

Water contamination caused by heavy metals represents an urgent global issue. Cu2+, a potential trace heavy metal pollutant, can accumulate in the human body through the food chain, leading to excessive levels that give rise to diverse health complications. Hence, in this investigation, a novel and efficacious fluorescent probe named Eu-BTB was developed for the detection of Cu2+, employing 1,3,5-triphenyl(4-carboxyphenyl) (H3BTB) as the ligand and Eu3+ as the metallic framework. The probe demonstrates exceptional fluorescence characteristics. The interaction between the probe ligand BTB and Eu3+ triggers an antenna effect, heightening the emission efficiency of Eu3+ while preserving its intrinsic emission. The introduction of Cu2+ competes with BTB for binding, thus quelling the antenna effect and inducing a fluorescence alteration. Within the concentration range of 0.05-10 μM, the fluorescence intensity-to-Cu2+ concentration ratio exhibits a robust linear correlation, with a remarkably low detection limit of 10 nM and a rapid response time of 3 min. The fluorescent probe has been effectively deployed for the detection of copper ions in water across diverse environmental conditions, with the obtained outcomes being validated via the conventional approach of inductively coupled plasma mass spectrometry (ICP-MS). The Eu-BTB probe showcases the advantages of simplicity, swiftness, and broad applicability, thus affirming its potential for the prompt and accurate detection of Cu2+ in diverse environmental water samples.

Bis-chalcone Fluorescent Probe for Hydrazine Ratio Sensing in Environment and Organism

In this paper, four novel hydrazine fluorescent probes X1-X4 with bis-chalcone structure were designed and synthesized. Through the measurement of its optical properties, it is found that it can quickly identify hydrazine, high sensitivity, low detection limit, and good anti-interference ability. The recognition of hydrazine by probes X1-X4 is not affected in the pH range of 4-10, X2 has the highest sensitivity, and the detection limit is as low as 0.336 × 10-7 M. Through Gaussian quantization calculation of probe molecules and their reaction products with hydrazine, it is speculated that the recognition mechanism is the closure of intramolecular charge transfer effect. In addition, the cytotoxicity and imaging of HeLa cells were tested, which showed that probes X1-X4 could be used to detect hydrazine in cells.

A Ratiometric Fluorescent Probe for N2H4 Having a Large Detection Range Based upon Coumarin with Multiple Applications

Although hydrazine (N2H4) is a versatile chemical used in many applications, it is toxic, and its leakage may pose a threat to both human health and environments. Consequently, the monitoring of N2H4 is significant. This study reports a one-step synthesis for coumarin-based ratiometric fluorescent probe (FP) CHAC, with acetyl as the recognition group. Selected deprotection of the acetyl group via N2H4 released the coumarin fluorophore, which recovered the intramolecular charge transfer process, which caused a prominent fluorescent, ratiometric response. CHAC demonstrated the advantages of high selectivity, a strong capacity for anti-interference, a low limit of detection (LOD) (0.16 μM), a large linear detection range (0-500 μM), and a wide effective pH interval (6-12) in N2H4 detection. Furthermore, the probe enabled quantitative N2H4 verifications in environmental water specimens in addition to qualitative detection of N2H4 in various soils and of gaseous N2H4. Finally, the probe ratiometrically monitored N2H4 in living cells having low cytotoxicity.

Laser Ablation of Silicon Nanoparticles and Their Use in Charge-Coupled Devices for UV Light Sensing via Wavelength-Shifting Properties

This study explores the controlled laser ablation and corresponding properties of silicon nanoparticles (Si NP) with potential applications in ultraviolet (UV) light sensing. The size distribution of Si NPs was manipulated by adjusting the laser scanning speed during laser ablation of a silicon target in a styrene solution. Characterization techniques, including transmission electron microscopy, Raman spectroscopy, and photoluminescence analysis, were employed to investigate the Si NP structural and photophysical properties. Si NP produced at a laser scanning speed of 3000 mm/s exhibited an average diameter of ~4 nm, polydispersity index of 0.811, and a hypsochromic shift in the Raman spectrum peak position. Under photoexcitation at 365 nm, these Si NPs emitted apparent white light, demonstrating their potential for optoelectronic applications. Photoluminescence analysis revealed biexponential decay behavior, suggesting multiple radiative recombination pathways within the nanoscale structure. Furthermore, a thin film containing Si NP was utilized as a passive filter for a 2nd generation CCD detector, expanding the functionality of the non-UV-sensitive detectors in optics, spectrometry, and sensor technologies.

A Novel Fluorescence Sensor for Iodide Detection Based on the 1,3-Diaryl Pyrazole Unit with AIE and Mechanochromic Fluorescence Behavior

A D-A type of luminophore, TPA-CDP, was designed and synthesized by using triphenylamine (TPA) as D (electron donor), 1,3-diaryl pyrazole with cyano groups (CDP) as A (electron acceptor) and employing a cyanovinyl segment as a recognition group. Firstly, TPA-CDP demonstrates effective fluorescence quenching as a sensor for I- by the nucleophilic addition reaction of the cyanovinyl segment with a high level of sensitivity, selectivity and a low determination limit of 4.43 μM. Interestingly, TPA-CDP exhibited an AIE phenomenon with the fw value reaching 50%. In addition, TPA-CDP displayed distinct mechanochromic fluorescence behavior with 70 nm red shift, which was observed over four repeated cycles. Furthermore, the mechanochromic fluorescence behavior of TPA-CDP, as observed in powder XRD experiments, was found to be associated with the morphological transition from a crystalline state to an amorphous state. These results confirm the significant potential of CDP as a powerful electron-deficient component in the creation of D-A-type mechanochromic fluorescence materials and biosensors for detecting I-.

Ce(IV)-coordinated organogel-based assay for on-site monitoring of propyl gallate with turn-on fluorescence signal

Propyl gallate (PG) is a commonly used synthetic phenolic antioxidant in foodstuffs and industrial products. Due to the potential health risk of PG, rapid and on-site detection in food and environment samples are important to guarantee human health. Herein, we demonstrated rapid monitoring of PG by a fluorescence turn-on strategy based on a specific fluorogenic reaction between PG and polyethyleneimine (PEI). Specifically, Ce4+ with oxidase-mimicking activity oxidized PG to its oxides, which then reacted with PEI through the Michael addition to generate the fluorescent compound. The proposed fluorogenic reaction had good specificity for PG, which could distinguish PG from other phenolic antioxidants and interferences. Furthermore, portable and low-cost organogel test kits were prepared using poly(ethylene glycol) diacrylate for quantitative and on-site detection of PG via a smartphone-based sensing platform. The organogel-based assay detection limit was 1.0 μg mL-1 with recoveries ranging from 80.2% to 106.2% in edible oils and surface water. Suitability of the developed assay was also validated by high-performance liquid chromatography. Our study provides an effective fluorescent approach to rapid, specific, and convenient monitoring of PG, which is useful for diminishing the risk of PG exposure.

A near-infrared ratiometric fluorescent probe for hydrazine and its application for gaseous sensing and cell imaging

Hydrazine (N₂H₄) is a widely used raw material in the chemical industry, but at the same time hydrazine has extremely high toxicity. Therefore, the development of efficient detection methods is crucial for monitoring hydrazine in the environment and evaluating the biological toxicity of hydrazine. This study reports a near-infrared ratiometric fluorescent probe (DCPBCl₂-Hz) for the detection of hydrazine by coupling a chlorine-substituted D-π-A fluorophore (DCPBCl₂) to the recognition group acetyl. Due to the halogen effect of chlorine substitution, the fluorophore has an elevated fluorescence efficiency and a lowered pKa value and is suitable for physiological pH conditions. Hydrazine can specifically react with the acetyl group of the fluorescent probe to release the fluorophore DCPBCl₂, so the fluorescence emission of the probe system significantly shifted from 490 nm to 660 nm. The fluorescent probe has many advantages, such as good selectivity, high sensitivity, large Stokes shift, and wide applicable pH range. The probe-loaded silica plates can realize convenient sensing gaseous hydrazine with content down to 1 ppm (mg/m³). Subsequently, DCPBCl₂-Hz was successfully applied to detect hydrazine in soils. In addition, the probe can also penetrate living cells and allow the visualization of intracellular hydrazine. It can be anticipated that probe DCPBCl₂-Hz will be a useful tool for sensing hydrazine in biological and environmental applications.

Robust and Highly Efficient Electrochemical Hydrogen Production from Hydrazine-Assisted Water Electrolysis Enabled by the Metal-Support Interaction of Ru/C Composites

Hydrazine oxidation-assisted water electrolysis provides a promising way for the energy-efficient electrochemical hydrogen (H₂) and synchronous decomposition of hydrazine-rich wastewater, but the development of highly active catalysts still remains a great challenge. Here, we demonstrate the robust and highly active Ru nanoparticles supported on the hollow N-doped carbon microtube (denoted as Ru NPs/H-NCMT) composite structure as HER and HzOR bifunctional electrocatalysts. Thanks to such unique hierarchical architectures, the as-synthesized Ru NPs/H-NCMTs exhibit prominent electrocatalytic activity in the alkaline condition, which needs a low overpotential of 29 mV at 10 mA cm^-2 for HER and an ultrasmall working potential of -0.06 V (vs RHE) to attain the same current density for HzOR. In addition, assembling a two-electrode hybrid electrolyzer using as-prepared Ru NPs/H-NCMT catalysts shows a small cell voltage of mere 0.108 V at 100 mA cm^-2, as well as the remarkable long-term stability. Density functional theory calculations further reveal that the Ru NPs serve as the active sites for both the HER and HzOR in the nanocomposite, which facilitates the adsorption of H atoms and hydrazine dehydrogenation kinetics, thus enhancing the performances of HER and HzOR. This work paves a novel avenue to develop efficient and stable electrocatalysts toward HER and HzOR that promises energy-saving hybrid water electrolysis electrochemical H₂ production.

Naphthalene-based fluorescent probe for on-site detection of hydrazine in the environment

The widespread occurrence of hydrazine residues in the environment, including in water, soil, and organisms, is a potential health threat to humans. Therefore, the development of an efficient method for the detection of hydrazine in environmental samples is highly desirable although it poses a significant challenge. In this study, we designed and synthesized a series of naphthalene-based fluorescent dyes through structural engineering and developed a novel probe for hydrazine detection. The probe could provide a distinct fluorescence response toward hydrazine in aqueous solution with high sensitivity and selectivity. Moreover, paper-based test strips can be easily fabricated using this probe, enabling the portable on-site detection of hydrazine with the aid of a smartphone. Furthermore, we demonstrated that this probe is capable of recognizing hydrazine in various environmental samples, including water, soil, plants, and zebrafish embryos. This research provides a promising tool for the detection of hydrazine in the environment.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

Smartphone-assisted microfluidic and spectrophotometric recognition of hydrazine: a new platform towards rapid analysis of carcinogenic agents and environmental technology

Hydrazine (Hyd), a poisonous substance, is frequently employed in agriculture and industry as a scavenger to remove residues of oxygen from boiler feed water, electrical power plants, etc. Even at trace amounts, these chemicals are hazardous to humans. To limit the risks of exposure, there is a critical need for sensors for the monitoring of Hyd concentration to guarantee they are below harmful levels. In comparison to other approaches, the colorimetric method has garnered a great deal of interest due to its high sensitivity, speed, convenience, and simple optical color change detection. This study's primary purpose is to develop a portable tool for the colorimetric and spectrophotometric detection of Hyd using silver nanoparticles (silver nanoprism (AgNPr), silver nanowires (AgNW), and silver citrate (AgCit)). In addition, UV-visible spectroscopy was utilized for the quantitation evaluation of Hyd in real samples. The proposed approach demonstrated a linear range of 0.08 M to 6 M for Hyd by AgNW and 0.02 to 5 M by AgNPr as optical probes, whereas AgCit exhibited no color change (negative response). Using AgNPr and AgNW, the low limit of detection of Hyd was 200 μM and 800 μM, respectively. In addition, a novel method was employed for the first time to explore the effect of time on the determination of the candidate analyte. Consequently, the proposed method can be utilized to detect Hyd in real samples. Therefore, our method shows both qualitative and quantitative measurement of Hyd with high sensitivity, low cost, and fast analysis time and promisingly it can be industrialized for quick detection of Hyd in aquatic real samples.

Hydrazine High-Performance Oxidation and Sensing Using a Copper Oxide Nanosheet Electrocatalyst Prepared via a Foam-Surfactant Dual Template

This work demonstrates hydrazine electro-oxidation and sensing using an ultrathin copper oxide nanosheet (CuO-NS) architecture prepared via a versatile foam-surfactant dual template (FSDT) approach. CuO-NS was synthesised by chemical deposition of the hexagonal surfactant Brij^®58 liquid crystal template containing dissolved copper ions using hydrogen foam that was concurrently generated by a sodium borohydride reducing agent. The physical characterisations of the CuO-NS showed the formation of a two-dimensional (2D) ultrathin nanosheet architecture of crystalline CuO with a specific surface area of ~39 m²/g. The electrochemical CuO-NS oxidation and sensing performance for hydrazine oxidation revealed that the CuO nanosheets had a superior oxidation performance compared with bare-CuO, and the reported state-of-the-art catalysts had a high hydrazine sensitivity of 1.47 mA/cm² mM, a low detection limit of 15 μM (S/N = 3), and a linear concentration range of up to 45 mM. Moreover, CuO-NS shows considerable potential for the practical use of hydrazine detection in tap and bottled water samples with a good recovery achieved. Furthermore, the foam-surfactant dual template (FSDT) one-pot synthesis approach could be used to produce a wide range of nanomaterials with various compositions and nanoarchitectures at ambient conditions for boosting the electrochemical catalytic reactions.

Laser-Printed Paper-Based Microfluidic Chip Based on a Multicolor Fluorescence Carbon Dot Biosensor for Visual Determination of Multiantibiotics in Aquatic Products

Excessive use of antibiotics in aquaculture severely endangers human health and ecosystems, which has raised significant concerns in recent years. However, conventional laboratory-based approaches regularly required time or skilled manpower. Herein, we propose a point-of-care-testing (POCT) biosensor detection device for the simultaneous determination of multiantibiotics without complex equipment or professional operators. A laser-printed paper-based microfluidic chip loaded with multicolor fluorescence nanoprobes (mCD-μPAD) was developed to rapidly detect sulfamethazine (SMZ), oxytetracycline (OTC), and chloramphenicol (CAP) on-site. These "fluorescence off" detection probes composed of carbon dots (CDs) conjugated with aptamers (donor) and MoS₂ nanosheets (acceptor) (CD-apt-MoS₂) were based on Förster resonance energy transfer. Upon the addition of target antibiotics, the significantly recovered fluorescence signal on the μPAD can be sensitively perceived by employing a 3D-printed portable detection box through a smartphone. Under optimal conditions, this μPAD allowed for a rapid response of 15 min toward SMZ, OTC, and CAP with considerable sensitivities of 0.47, 0.48, and 0.34 ng/mL, respectively. In shrimp samples, the recoveries were 95.2-101.2, 96.4-105, and 96.7-106.1% with RSD below 6%. This paper-based sensor opens an avenue for on-site, high-throughput, and rapid detection methods and can be widely used in POCT in food safety.

Robust ERα-Targeted Near-Infrared Fluorescence Probe for Selective Hydrazine Imaging in Breast Cancer

Breast cancer is the most common malignancy in women and may become worse when a high concentration of hydrazine is absorbed from the environment or drug metabolite. Therefore, rapid and sensitive detection of hydrazine in vivo is beneficial for people's health. In this work, a novel estrogen receptor α (ERα)-targeted near-infrared fluorescence probe was designed to detect hydrazine levels. The probe showed good ERα affinity and an excellent fluorescence response toward hydrazine. Selectivity experiments demonstrated that the probe had a strong anti-interference ability. Mechanistic studies, including mass spectrometry (MS) and density functional theory (DFT) calculation, indicated that intermolecular charge transfer (ICT) progress was hindered when the probe reacted with hydrazine, resulting in fluorescent quenching. In addition, the probe could selectively bind to MCF-7 breast cancer cells with excellent biocompatibility. The in vivo and ex vivo imaging studies demonstrated that the probe could rapidly visualize hydrazine with high contrast in MCF-7 xenograft tumors. Therefore, this probe can serve as a potential tool to robustly monitor hydrazine levels in vivo.

Two Ratiometric Fluorescent Probes Based on the Hydroxyl Coumarin Chalcone Unit with Large Fluorescent Peak Shift for the Detection of Hydrazine in Living Cells

Hydrazine is widely used in industrial and agricultural production, but excessive hydrazine possesses a serious threat to human health and environment. Here two new ratiometric fluorescence probes, DDP and DDC, with the hydroxyl coumarin chalcone unit as the sensing site are developed, which can achieve colorimetric and ratiometric recognition for hydrazine with good sensitivity, excellent selectivity, and anti-interference. The calculated fluorescence limits of detections are 0.26 μM (DDC) and 0.14 μM (DDP). The ratiometric fluorescence response to hydrazine is realized through the adjustment of donor and receptor units in coumarin conjugate structure terminals, accompanied by fluorescence peak shift about 200 nm (DDC, 188 nm; DDP, 229 nm). Stronger electropositivity in the carbon-carbon double bond is helpful to the first phase addition reaction between the probe and hydrazine. Higher phenol activity in the hydroxyl coumarin moiety will facilitate the following dihydro-pyrazole cyclization reaction. In addition, both of these probes realized the convenient detection of hydrazine vapor. The probes were also successfully applied to detect hydrazine in actual water samples, different soils, and living cells.

Ratiometric fluorescent and colorimetric dual-modal sensing strategy for discrimination and detection of D2O from H2O

A ratiometric fluorescent and colorimetric dual-modal sensing strategy is reported to distinguish and detect D₂O from H₂O based on ground-state proton transfer for the first time. It enables synchronous dual-modal changes towards different fractions of D₂O and facilitates naked-eye recognition. The probe can provide a more accurate monitoring protocol for D₂O analysis.

A colorimetric and fluorometric probe for phenylhydrazine and its application in real samples

A fluorescent probe for phenylhydrazine detection was developed with aldehyde as the recognition group and good selectivity towards phenylhydrazine over hydrazine, hydroxylamine and other amines was observed. Its application in real water samples and fast visualization of phenylhydrazine using a probe-loaded paper strip were demonstrated.

A pH-applicative fluorescent probe with long measuring range for monitoring hydrazine in water samples and Arabidopsis thaliana

In this work, a fluorescent probe, RhodCl-Hz, with pH-applicative capability and long measuring range, was developed to serve the topic on the enrichment process of hydrazine. It was practical due to the clear acid-base boundary and the sectioned linear ranges. With the excitation wavelength of 515 nm and the emission peak at 565 nm, the detecting system was steady. It exhibited a clear cut-off point at pH 7.0 and steady fluorescence signals within the range of 7.0-10.0. As a whole, the linear range of 10.0-500 µM (1.0-50.0 equivalent) was long. The Limit of Detection value was calculated as 0.64 μM. With high selectivity, RhodCl-Hz was applied to suit water samples and biological imaging in both Arabidopsis Thaliana root tips and living MCF-7 cells. The information here might be helpful for revealing the enrichment process of hydrazine.

A fluorescent probe derived from Berberrubine for detecting hydrogen polysulfide in food samples

In this work, we chose the fluorophore Berberrubine to develop a selective probe for hydrogen polysulfide (H₂S_n), and applied it into the detection in both food samples and living cells. The developed probe, HER9SS, suggested practical steadiness and serviceability, especially for multi-scene detection. The detecting system was stable in relatively wide pH (7.0-11.0) and temperature (25-45 °C) ranges. Both the storage of BER9SS in solid or in solution could maintain the steadiness over 7 d. BER9SS also indicated advantages including rapid response (within 15 min), high sensitivity (LOD = 0.02 μM; LOQ = 0.01 μM), long linear range (0-15.0 equivalent) and high selectivity among competing analytes. The recovery ranging in 95.23% - 104.8% in the applications in food sources samples (including water and plants) and food samples inferred the practical potential of BER9SS. In biological imaging, BER9SS could achieve both the dose-dependent monitoring and the β-lapachone-induced generation of H₂S_n. Therefore, the information in this work might be useful for the development of fluorescent probes from natural products for multi-scene applications in future, especially with the corresponding attentions on the practicability and serviceability.

Recent Advances in Chemical Sensors for Soil Analysis: A Review

The continuously rising interest in chemical sensors’ applications in environmental monitoring, for soil analysis in particular, is owed to the sufficient sensitivity and selectivity of these analytical devices, their low costs, their simple measurement setups, and the possibility to perform online and in-field analyses with them. In this review the recent advances in chemical sensors for soil analysis are summarized. The working principles of chemical sensors involved in soil analysis; their benefits and drawbacks; and select applications of both the single selective sensors and multisensor systems for assessments of main plant nutrition components, pollutants, and other important soil parameters (pH, moisture content, salinity, exhaled gases, etc.) of the past two decades with a focus on the last 5 years (from 2017 to 2021) are overviewed.

A bis-pyrene chalcone based fluorescent material for ratiometric sensing of hydrazine: An acid/base molecular switch and solid-state emitter

In this work, we have designed and synthesized a new fluorescent molecular probe, DPY comprising of pyrene-diacetylpyridine conjugate, which was found to be sensitive to hydrazine as well as protonation. DPY is characterised by a strong emission both in solution (λ_em = 530 nm) as well as in solid state (λ_em = 610 nm), attributed to intramolecular charge-transfer. The probe responds to hydrazine with a ratiometric fluorescence emission change from yellow to blue, due to chalcone cyclisation reaction of α, β-unsaturated carbonyl group resulting in the pyrazoline compound, DPY-Hy, imparting a strong greenish-blue emission in solution. Further, the strong fluorescence emission of DPY in powder and thin film was quenched upon exposure to TFA, and revived upon exposure to TEA. For developing on-site detection protocol, when DPY was drop-casted on nonfluorescent silica plate a vivid naked-eye colour change from orange-red to dark blue was realized. Interestingly, in the aggregated state, DPY exhibited a broad range emission from green to orange in a mixed solvent system of THF:H₂O. A plausible explanation of the photophysical events is substantiated with theoretical calculations.