MnCo2O4 coated carbon felt anode for enhanced microbial fuel cell performance

Enhanced performance of acridine degradation and power generation by microbial fuel cell with g-C3N4/PANI-DA/CF anode

Microbial fuel cell (MFC) has attracted much attention in treating organic wastewater due to its double functions of degrading organics and generating electricity with microorganisms as biocatalysts. Unfortunately, some organics with biological toxicity such as acridine could inhibit the growth and activity of the microorganisms on the anode so that the double functions of MFC would recede. Enhancing microbial activity by using new biocompatible materials as anodes is prospective to solve problem. A novel anode was achieved by electrodepositing g-C3N4 sheets to the carbon felt (CF) modified with polyaniline-dopamine composite film, and used to treat wastewater containing acridine for the first time. After the operation of 13 d, MFC loading with the composite anode showed a degradation efficiency of 98.3% in 150 mg L-1 acridine, while that of CF-MFC was 55.8%. Moreover, MFC loading the modified anode obtained a maximum power density of 1976 ± 47 mW m-2, 140.1% higher than that of CF-MFC. Further analysis revealed that the functional microorganisms associated with acridine degradation such as Achromobacter and Alcaligenes were enriched on the g-C3N4/PANI-DA/CF anode. Moreover, the composite anode could improve the activity of microorganisms and elicit them to generate conductive nanowires, which was beneficial to transferring electrons from microbes to anode over long distances, suggesting a promising prospect application in MFC.

Bioelectrocatalytic reduction by integrating pyrite assisted manganese cobalt-doped carbon nanofiber anode and bacteria for sustainable antimony catalytic removal

A novel manganese cobalt metal-organic framework based carbon nanofiber electrode (MnCo/CNF) was prepared and used as microbial fuel cell (MFC) anode. Pyrite was introduced into the anode chamber (MnCoPy_MFC). Synergistic function between pyrite and MnCo/CNF facilitated the pollutants removal and energy generation in MnCoPy_MFC. MnCoPy_MFC showed the highest chemical oxygen demand removal efficiency (82 ± 1%) and the highest coulombic efficiency (35 ± 1%). MnCoPy_MFC achieved both efficient electricity generation (maximum voltage: 658 mV; maximum power density: 3.2 W/m3) and total antimony (Sb) removal efficiency (99%). The application of MnCo/CNF significantly enhanced the biocatalytic efficiency of MnCoPy_MFC, attributed to its large surface area and abundant porous structure that provided ample attachment sites for electroactive microorganisms. This study revealed the synergistic interaction between pyrite and MnCo/CNF anode, which provided a new strategy for the application of composite anode MFC in heavy metal removal and energy recovery.

Untreated vs. Treated Carbon Felt Anodes: Impacts on Power Generation in Microbial Fuel Cells

This research sought to enhance the efficiency and biocompatibility of anodes in bioelectrochemical systems (BESs) such as microbial fuel cells (MFCs), with an aim toward large-scale, real-world applications. The study focused on the effects of acid-heat treatment and chemical modification of three-dimensional porous pristine carbon felt (CF) on power generation. Different treatments were applied to the pristine CF, including coating with carbon nanofibers (CNFs) dispersed using dodecylbenzene sulfonate (SDBS) surfactant and biopolymer chitosan (CS). These processes were expected to improve the hydrophilicity, reduce the internal resistance, and increase the electrochemically active surface area of CF anodes. A high-resolution scanning electron microscopy (HR-SEM) analysis confirmed successful CNF coating. An electrochemical analysis showed improved conductivity and charge transfer toward [Fe(CN)6]3-/4- redox probe with treated anodes. When used in an air cathode single-chamber MFC system, the untreated CF facilitated quicker electroactive biofilm growth and reached a maximum power output density of 3.4 W m-2, with an open-circuit potential of 550 mV. Despite a reduction in charge transfer resistance (Rct) with the treated CF anodes, the power densities remained unchanged. These results suggest that untreated CF anodes could be most promising for enhancing power output in BESs, offering a cost-effective solution for large-scale MFC applications.

Microbe-Anode Interactions: Comparing the impact of genetic and material engineering approaches to improve the performance of microbial electrochemical systems (MES)

Microbial electrochemical systems (MESs) are a highly versatile platform technology with a particular focus on power or energy production. Often, they are used in combination with substrate conversion (e.g., wastewater treatment) and production of value-added compounds via electrode-assisted fermentation. This rapidly evolving field has seen great improvements both technically and biologically, but this interdisciplinarity sometimes hampers overseeing strategies to increase process efficiency. In this review, we first briefly summarize the terminology of the technology and outline the biological background that is essential for understanding and thus improving MES technology. Thereafter, recent research on improvements at the biofilm-electrode interface will be summarized and discussed, distinguishing between biotic and abiotic approaches. The two approaches are then compared, and resulting future directions are discussed. This mini-review therefore provides basic knowledge of MES technology and the underlying microbiology in general and reviews recent improvements at the bacteria-electrode interface.

Electrospinning Mo-Doped Carbon Nanofibers as an Anode to Simultaneously Boost Bioelectrocatalysis and Extracellular Electron Transfer in Microbial Fuel Cells

The sluggish electron transfer at the interface of microorganisms and an electrode is a bottleneck of increasing the output power density of microbial fuel cells (MFCs). Mo-doped carbon nanofibers (Mo-CNFs) prepared with electrostatic spinning and high-temperature carbonization are used as an anode in MFCs here. Results clearly indicate that Mo₂C nanoparticles uniformly anchored on carbon nanowire, and Mo-doped anodes could accelerate the electron transfer rate. The Mo-CNF ΙΙ anode delivered a maximal power density of 1287.38 mW m^-2, which was twice that of the unmodified CNFs anode. This fantastic improvement mechanism is attributed to the fact that Mo doped on a unique nanofiber surface could enhance microbial colonization, electrocatalytic activity, and large reaction surface areas, which not only enable direct electron transfer, but also promote flavin-like mediated indirect electron transfer. This work provides new insights into the application of electrospinning technology in MFCs and the preparation of anode materials on a large scale.

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

Carbon nanotubes encapsulating FeS2 micropolyhedrons as an anode electrocatalyst for improving the power generation of microbial fuel cells

The low power density originating from poor electroactive bacteria (EAB) adhesion and sluggish extracellular electron transfer (EET) at the anode interface, is a major impediment preventing the practical implementation of microbial fuel cells (MFCs). Tailoring the surface properties of anodes is an effective and powerful strategy for addressing this issue. In this study, we successfully fabricated an efficient anode electrocatalyst, consisting of carbon nanotubes encapsulating iron disulfide (FeS2@CNT) micropolyhedrons, using simple hydrothermal and freeze-drying methods, which not only strengthened the anode interaction with EAB but also promoted the EET process at the anode interface. As expected, the MFCs with a FeS2@CNT anode yielded an outstanding power density of 1914 mWm-2 at a current density of 4350 mA m-2, which significantly exceeded those of pure CNT (1096.2mW m-2, 2703.3 mA m-2) and carbon cloth (426.8mWm-2, 965.6 mA m-2) anodes. The high-power output can be attributed to the synergistic effect between FeS2 and CNTs, endowing the anode with biocompatibility for biofilm adhesion and colonization, nutrient diffusion, and the presence of abundant Fe and S active sites for EET mediation. Owing to the low cost, facile fabrication process, and excellent electrocatalytic performance toward the redox reactions in biofilms, the synthesized FeS2@CNT electrocatalyst is a promising material for high-performance and cost-effective MFCs with commercial applications.

General aspects and novel PEMss in microbial fuel cell technology: A review

The current scenario of energy production is mostly shifted towards sustainable renewable energy sources. Other than the energy production from natural resources such as sun, wind and water, microbial fuel cell system (MFC) has earned attraction in recent times. These microbial fuel cell systems are bioelectrochemical cell that possesses a unique ability to generate power as well as treats wastewater simultaneously. In this paper, an overview of the microbial fuel cell system and the effect of significant components on the performance of microbial fuel cell systems are reviewed. Firstly, the importance of the MFC system in power generation, its components, the working principle and various configurations of the MFC were briefly introduced. Biofilm plays a major role in the MFC system. Thus the importance of bio film, bio film formation and characterization techniques are summarised. Further, the review mainly addresses the mechanism of conventional and novel membrane materials on the performance of the MFC system. In addition, special emphasis on ceramic-based materials in the MFC system is presented. Finally, recent applications of the MFC systems are discussed.

Model development of bioelectrochemical systems: A critical review from the perspective of physiochemical principles and mathematical methods

Bioelectrochemical systems (BESs) are promising devices for wastewater treatment and bio-energy production. Since various processes are interacted and affect the overall performance of the device, the development of theoretical modeling is an efficient approach to understand the fundamental mechanisms that govern the performance of the BES. This review aims to summarize the physiochemical principle and mathematical method in BES models, which is of great importance for the establishment of an accurate model while has received little attention in previous reviews. In this review, we begin with a classification of existing models including bioelectrochemical models, electronic models, and machine learning models. Subsequently, physiochemical principles and mathematical methods in models are discussed from two aspects: one is the description of methodology how to build a framework for models, and the other is to further review additional methods that can enrich model functions. Finally, the advantages/disadvantages, extended applications, and perspectives of models are discussed. It is expected that this review can provide a viewpoint from methodologies to understand BES models.

Advancements on sustainable microbial fuel cells and their future prospects: A review

A microbial fuel cell (MFC) is a sustainable device that produces electricity. The main components of MFC are electrodes (anode & cathode) and separators. The MFC's performance is ascertained by measuring its power density. Its components and other parameters, such as cell design and configuration, operation parameters (pH, salinity, and temperature), substrate characteristics, and microbes present in the substrate, all influence its performance. MFC can be scaled up and commercialized using low-cost materials without affecting its performance. Hence the choice of materials plays a significant role. In the past, precious and non-precious metals were mostly used. These were replaced by a variety of low-cost carbonaceous and non-carbonaceous materials. Nano materials, activated compounds, composite materials, have also found their way as components of MFC materials. This review describes the recently reported modified electrodes (anode and cathode), their improvisation, their merits, pollutant removal efficiency, and associated power density.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

Heterogeneous Structure Regulated by Selection Pressure on Bacterial Adhesion Optimized the Viability Stratification Structure of Electroactive Biofilms

As the core of microbial fuel cells (MFCs), the components and structure of electroactive biofilms (EABs) are essential for MFC performance. Bacterial adhesion plays a vital role in shaping the structure of EABs, but the effect of bacterial adhesion under selection pressure on EABs has not been systematically studied. Here, the response of the composition, structure, and electrochemical performance of EABs to the selective adhesion pressure due to the selective coordination of Fe(III) and Co(II) with thiol and the different affinities for bacteria on hybrid electrodes (Fe₁Co, Fe₄Co, and Fe₁₀Co) were comprehensively investigated. Compared with carbon cloth (CC), the appropriate selective adhesion pressure of Fe₄Co activated the dead inner core of EABs and optimized their viability stratification structure. Both the total viability and the viability of the inner core layer in the Fe₄Co EAB (0.67, 0.70 ± 0.01) were higher than those of the CC (0.46, 0.54 ± 0.01), Fe₁Co (0.50, 0.48 ± 0.03), and Fe₁₀Co (0.51, 0.51 ± 0.03). Moreover, a higher proportion of proteins was detected in the Fe₄Co EAB, enhancing the redox activity of extracellular polymeric substances. Fe₄Co enriched Geobacter and stimulated microbial metabolism. Electrochemical analysis revealed that the Fe₄Co EAB was the most electroactive EAB, with a maximum power density of 2032.4 mW m^-2, which was 1.7, 1.3, and 1.1 times that of the CC (1202.6 mW m^-2), Fe₁Co (1610.3 mW m^-2), and Fe₁₀Co (1824.4 mW m^-2) EABs, respectively. Our findings confirmed that highly active EABs could be formed by imposing selection pressure on bacterial adhesion.

Shewanella putrefaciens powered microfluidic microbial fuel cell with printed circuit board electrodes and soft-lithographic microchannel

Microfluidic microbial fuel cells (μ-MFCs) have received considerable attention due to their ability to generate green and qualitative self-sustainable energy. Several electrodes and device fabrication methodologies, and various electrochemically active bacteria (EABs), along with their effect on MFC performance with various operating parameters, have been well reported. However, shorter life, lower throughput, and high operating and maintenance overheads are major impediments to their development towards commercialization. In this context, simple and cost-effective bioelectrodes using printed circuit board (PCB) and a polymer based microchannel have been fabricated using modern photolithography and soft-lithography techniques respectively. Furthermore, the etched PCB electrodes were patterned with multi-walled carbon nanotubes (MWCNT). Subsequently, these bioelectrodes were assembled over a Y-shaped microchannel and tested under a co-laminar microfluidic flow environment powered by Shewanella putrefaciens. Various volumetric bacterial experiments and flow rate studies have also been conducted to find the most appropriate optimum bacterial volume and power efficiency. Subsequently, extensive potentiometric electrochemical studies, such as Open Circuit Potential (OCP) and polarization analysis, were accomplished using electrochemical workstation. This well-developed handheld μ-MFCs yields a maximum open circuit potential 395 mV with maximum power density of 239.2 μW/cm² (3.271 mA/cm²) at optimized parameters.

Bio-energy generation and treatment of tannery effluent using microbial fuel cell

In this study, Graphite Particle (GP) and Carbon Cloth (CC) are employed as anode electrodes to study both bio-energy generation, and decrease of Chemical Oxygen Demand (COD) simultaneously using tannery effluent. The influence of electrodes distance (10 cm and 20 cm) on electricity production was evaluated. COD removal level of GP (75%) and CC (60%), maximum power outputs for 10 cm distance (600 ± 5 mW m^-2) & (500 ± 10 mW m^-2) and for 20 cm distance (520 ± 5 mW m^-2) and also (430 ± 20 mW m^-2) GP and CC were noted correspondingly. The outcomes of different parameters of MFC namely pH, conductivity, COD concentration, membrane thickness and size of bio-energy generation from tannery effluent in the MFC were investigated. The experimental results reveal that electrode provides highest power output with 10 cm distance between anode and cathode chamber. As a result, GP electrode is gradually viable, biocompatible, effective and adaptable for field application in MFC. The GP electrode has high potential for more power output, when compared to the CC electrode. The MFC system performance was improved with increasing effluent COD concentration (2340-4720 ppm), anolyte conductivity (1.6-8.1 mS cm^-1) and membrane area (9-20 cm²). The system working with conductivity of 8.1 mS cm^-1 and its effluent COD concentration of 4720 ppm generated the maximum peak power density of 44.69 mW m^-2 with respective current density of 109 mA m^-2. The findings thus show that considerable power production and effluent treatment can be achieved by MFC.

Quinones contained in wastewater as redox mediators for the synergistic removal of azo dye in microbial fuel cells

The present paper aimed to investigate the roles of quinones contained in wastewater and the enhanced effects on microbial fuel cells (MFCs) under different redox conditions. The feasibility of using wastewater rich in quinones to act as co-substrate and redox mediators (RMs) library to strengthen the synergistic removal of azo dye in MFCs was evaluated. The results demonstrated that quinones achieved enhanced effects on electricity generation and COD removal of MFC better at higher current intensity. The addition of pure quinone decreased electron transfer resistance (Rct) of MFCs from 4.76 Ω to 2.13 Ω under 1000 Ω resistance and 1.16 Ω-0.75 Ω under 50 Ω resistance. Meanwhile, higher coulombic efficiency was achieved. Compared with sodium acetate, using quinone-rich traditional Chinese medicine (TCM) wastewater as the co-substrate enhanced the synergistic removal of reactive red 2 (RR2) in MFCs from 79.58% to 92.45% during 24 h. RR2 was also degraded more thoroughly due to the accelerated electron transfer process mediated by RMs. Microbial community analysis demonstrated that the presence of quinone in TCM wastewater can enrich different exoelectrogens under varied redox conditions and thus influenced the enhanced effects on MFC. Metagenomic functional prediction results further indicated that the abundance of functional genes involved in carbohydrate metabolism, membrane transport metabolism, biofilm formation, and stress tolerance increased significantly in presence of RMs. Redundancy analyses revealed that RMs addition was the more important factor driving the variation of the microorganism community. This study revealed the potential effect of quinones as redox mediators on the bioelectrochemical system for pollutants removal.

Efficiency of microbial fuel cells in the treatment and energy recovery from food wastes: Trends and applications - A review

The rising global population and their food habits result in food wastage and cause an obstacle in its treatment and disposal. Due to the rapid shift in the lifestyle of the human population and urbanization, almost one-third of the food produced is wasted from various sectors like domestic sources, agricultural sectors, and industrial sectors. These food resources squandered are rich in organic biomolecules which can cause complications upon direct disposal in the environment. Conventional disposal methods like composting, landfills and incineration demand high costs besides causing severe environmental and health issues. To overcome these demerits of the conventional methods and to avoid the loss of rich organic food resources, there is an immediate need for a sustainable and eco-friendly solution for the valorization of the food wastes. Microbial fuel cells (MFCs) are gaining attention, due to their ideal approach in the production of electricity and parallel treatment of organic food wastes. The MFCs are significant as an innovative approach using microorganisms and oxidizing the organic food wastes into bio-electricity. In this review, the recent advancements and practices of the MFCs in the field of food waste treatment and management along with electricity production are discussed. The major outcome of this work highlights the setting up of MFC for the treatment of higher volumes of food waste residues and enhancing the bioelectricity production in an optimal condition. For further improvements in the food waste treatments using MFCs, greater understanding and more research needs are to be focused on the commercialization, different operational modes, operational types, and low-cost fabrication coupled with careful examination of scale-up factors.