Polyhydroxyalkanoates (PHAs) degradation by the newly isolated marine Bacillus sp. JY14

Characterization of Streptomyces species with poly(3-hydroxybutyrate) degradation capabilities isolated from rice field soil

The shift towards sustainable alternatives to petroleum-based polymers has become essential for addressing environmental challenges. Among these alternatives, bio-plastics such as poly(3-hydroxybutyrate) (PHB) have gained considerable attention due to their biodegradability into water and carbon dioxide through microbial activity. PHB is one of the most widely commercialized bio-plastics. However, its excessive accumulation in the environment due to insufficient degradation remains a significant ecological concern. This study focused on isolating and characterizing PHB-degrading bacteria from soil samples collected from rice fields. Screening led to the identification of five PHB-degrading bacterial strains belonging to different genera. Among these, Streptomyces sp. AG7 and Streptomyces sp. RG41 were identified as the most effective PHB degraders. Their PHB-degrading abilities were evaluated in shake-flask cultures using PHB films as substrates. After 20 days of incubation at 37 °C, Streptomyces sp. AG7 and Streptomyces sp. RG41 achieved PHB degradation rates of approximately 74.7 % and 68.5 %, respectively. Additionally, both strains demonstrated the ability to produce indole-3-acetic acid (IAA), a key phytohormone that promotes plant growth, and exhibited phosphate-solubilizing activity, which enhances nutrient availability. Further analysis using scanning electron microscopy (SEM) revealed structural changes in the PHB films, while gel permeation chromatography (GPC) confirmed significant alterations in the polymer's molecular properties. These findings highlight the potential of utilizing soil-derived Streptomyces species for sustainable PHB waste management, in order to promote plant growth, improve soil fertility through phosphate solubilization, and contribute to agricultural sustainability.

Examining the potential of plastic-fed black soldier fly larvae (Hermetia illucens) as "bioincubators" of plastic-degrading bacteria

AIMS

Larvae of the black soldier fly (BSFL), Hermetia illucens, are recognized for their remarkable feeding flexibility and ability to convert a variety of organic waste streams into useful end products. Their ability to feed on both harmful and recalcitrant waste streams is thought to be due in part to plasticity in their gut microbiota, which shifts rapidly to select for taxa better suited to the incoming diet. Here, we aimed to exploit this feeding plasticity by using BSFL as "bioincubators," to grow and isolate plastic-degrading bacteria.

METHODS AND RESULTS

We fed larvae wheat bran containing a mix of microplastic (polyethylene terephthalate, polylactic acid, and polyhydroxybutyrate) and determined the community composition of plastic-degrading microorganisms using a combination of culturing techniques and next-generation sequencing. On average, more than a third of the gut microbiome was made up of genera that have previously demonstrated plastic degradation capabilities. To confirm this assessment, we isolated seven bacterial strains from plastic-fed BSFL that were positively identified as polyhydroxybutyrate-degraders in vitro.

CONCLUSIONS

Our results provide proof of concept that plastic-fed H. illucens could be used as bioincubators to grow plastic-degrading bacteria. We believe our methodology provides a simple model for verifying in silico results with in vitro tests and should be used to enhance the future isolation and characterization of novel plastic-degrading taxa.

Understanding the role of poly(3-hydroxybutyrate) depolymerases in waste management

Since conventional plastics are poorly degradable and harmful to living organisms, there is a need to look for alternative options such as poly(3-hydroxybutyrate) - PHB. This polymer is biodegradable via PHB depolymerases (PHBDs). Literature survey reveals that there are no comprehensive updates on PHBDs and in the current review, details regarding extracellular and intracellular forms of the enzyme are presented. Phylogenetically diverse PHBD-producing microorganisms are prevalent in a variety of natural and man-made habitats. These enzymes have been purified from different organisms and are seen to be active over a wide range of pH and temperatures. In general, extracellular PHBDs are made up of four constituents - signal peptide, catalytic domain [with a signature triad (serine, aspartate and histidine) and an oxyanion histidine], linker domain and substrate binding domain that enable degradation of PHB. Intracellular PHBDs have been mainly studied in bacterial genera such as Rhodobacter, Rhodospirillum, Ralstonia, Zoogloea, Pseudomonas, Sinorhizobium and Bacillus. Genes encoding them have been identified, characterized and cloned in other organisms. PHBD producers are envisioned to play a significant role in developing ecofriendly methods for removing PHB wastes thereby highlighting their practical relevance. Development of appropriate consortia including diverse PHBD producers and their introduction in waste disposal sites would enable treatment of PHB containing wastes. By using bioinformatics and synthetic biology-based approaches, further investigations on PHBDs from unexplored microorganisms can be undertaken and their role in the bioplastic waste management can be unraveled.

Natural-selected plastics biodegradation species and enzymes in landfills

Biodegradation is a promising and environmentally friendly strategy for plastic pollution management. Landfills decompose municipal solid waste, including almost 50% of global plastic debris and even some of the oldest synthetic plastics, fostering naturally selected plastic biodegradation. Herein, we present a global collection of plastic biocatalytic enzymes from landfills using metagenomics and machine learning. Metagenomic analysis identified 117 plastic-degrading genes, with 39 incorporated in 22 prokaryotic metagenome-assembled genomes (MAGs). A machine-learning approach predicted 978,107 candidate plastic-degrading genes, 712 of which were encoded respectively by 150 MAGs. Our results highlight landfills as reservoirs of diverse, naturally selected plastic-degrading microbes and enzymes, serving as references and/or models for biocatalysis engineering and in situ bioremediation of plastic pollution.

The role of carbon and nitrogen ratio on sewage sludge microbiota for producing polyhydroxyalkanoates

The products of an advanced sewage sludge fermentation process can be used to generate polyhydroxyalkanoates (PHAs), precursors of bioplastics considered excellent candidates for replacing petroleum-derived plastics. The aerobic feast-anoxic famine cycling strategy has proven to be an efficient method for enriching sewage sludge microbiota with PHA-producing microorganisms. This work evaluated the effect of different carbon to nitrogen ratios (C/N) of 3.5, 2, and 1 g COD/g N for modulating the structure of sewage sludge microbiota to improve PHA production. The study was executed on a pilot plant scale using wasted activated sludge as an organic carbon source derived from an oxic-settling anaerobic plant that collects wastewater from various facilities at the University of Palermo campus. PHA production performance was monitored over three experimental periods characterized by a different C/N ratio. The results showed that lower C/N ratios reduced PHA production with 20, 24, and 26 % w/w of PHAs for COD/N values of 1, 2, and 3.5 g COD/g N, respectively. In parallel, the metataxonomic analysis revealed a higher abundance of PHA-producing microorganisms at the ratio of 3.5 g COD/g N, such as Proteobacteria, specifically Betaproteobacteria. In addition, the analysis showed an increase in fungal abundance and diversity as decrease the ratio C/N decreased. Thus, these findings demonstrate the utility of metataxonomics in elucidating the relationships between operating conditions, bacterial and fungal microbiota structure and the achievement of specific outputs. The insights gained from this study demonstrated a positive correlation between C/N ratios, PHA-producing microorganisms, and PHA yields.

Altitudinal decline of vegetation restoration effects on soil microbial communities on high-altitude roadside slops: Environmental drivers and management implications

Construction activities in high-altitude regions have left many bare roadside slopes vulnerable to degradation, complicating restoration efforts. Soil microorganisms are vital for plant growth and nutrient cycling, yet their responses to restoration efforts at various altitudes remains uncertain. This study investigates soil microbial composition, network properties, ecological functions, keystone taxa, and environmental drivers across three restored vegetation types: herbaceous plants (H), shrubs + herbaceous plants (SH), and trees + shrubs + herbaceous plants (TSH) at elevations from 3100 to 3800 m. Our structural equation model identifies elevation and vegetation type as key factors influencing microbial communities, directly or indirectly, through their effects on plant and soil properties. We also found that bacterial α-diversity decreased with elevation, while fungal α-diversity increased, resulting in more complex but less stable microbial networks. R-strategists predominated in the herbaceous type (H) and at lower altitudes, whereas K-strategists dominated in the SH and TSH types, and at higher altitudes. Keystone species of type H, associated with pathotrophs and plant pathogens, showed a negative correlation with plant properties, which weakened at higher altitudes. Both bacterial and fungal communities were driven more by abiotic factors, especially ammonium (NH4+-N) and dissolved organic nitrogen (DON) for bacteria and soil water content (SWC) for fungi. This study proposes managing restoration-sensitive microbes and keystone taxa associated with specific vegetation types for effective restoration at appropriate altitudes, especially those shared by SH and TSH. Furthermore, integrating suitable legume or nitrogen-fixing woody vegetation into restoration efforts at lower altitudes and herbaceous vegetation into higher altitudes has the potential to significantly enhance plant growth and health at high altitudes. This study offers valuable guidance for optimizing restoration strategies by effectively addressing key environmental factors and nurturing essential microbial species crucial for successful restoration efforts and global warming mitigation.

Discovery of a Novel Bacillus sp. JO01 for the Degradation of Poly(butylene adipate-co-terephthalate)( PBAT) and Its Inhibition by PBAT Monomers

Poly(butylene adipate-co-terephthalate) (PBAT) is a type of biodegradable plastic composed of both aliphatic and aromatic hydrocarbon polymers, which grants it the advantages of processability and flexibility along with increased interest. Studies have suggested that PBAT biodegradation mechanisms involve enzymatic breakdown by lipases. Our initial efforts in this study were therefore focused on identifying a novel PBAT-degrading bacterial strain with high degradation activity. Nine bacterial strains from various sources were screened and assessed for their ability to degrade PBAT. Bacillus sp. JO01 strain, exhibiting high similarity (99%) with Bacillus toyonensis BCT-7112, demonstrated superior PBAT degradation activity under various temperature conditions from 25 to 42°C. Time-dependent PBAT degradation by Bacillus sp. JO01 indicated a maximum yield at 30°C, reaching 66% of film degradation measured. Besides PBAT, the strain showed degradability on PCL, PHB, and PBS. Physical characterization of the degraded PBAT films via scanning electron microscopy revealed that surface alterations such as cracks were reduced, as was the molecular weight. Bacillus sp. JO01 did not consume PBAT monomers, such as adipic acid (AA), 1,4-butanediol, and terephthalic acid (TPA). However, AA and TPA showed inhibitory effects on the degradation of PBAT films by Bacillus sp. JO01, resulting in 30% inhibition of degradation at 16 mM of AA and at 32 mM of TPA. This study highlights Bacillus sp. JO01 as a superior strain for PBAT degradation and suggests that PBAT monomers have an inhibitory effect on the degrading strains, which is an important consideration for the bulk degradation of bioplastics.

Isolation of Massilia species capable of degrading Poly(3-hydroxybutyrate) isolated from eggplant (Solanum melongena L.) field

Poly(3-hydroxybutyrate) (PHB) is crucial for replacing petroleum-based plastics, an essential step towards fostering a bio-based economy. This shift is urgently needed to safeguard human health and preserve natural ecosystems. PHB is one of the most extremely commercialized bio-plastics. Although. significant progress has been made in identifying bacteria that produce PHB, fewer bacteria capable of degrading it have been discovered. Four newly isolated Massilia strains capable of degrading PHB were discovered in eggplant (Solanum melongena L.) field soil. Their PHB-degrading abilities were investigated under different temperatures and media using emulsified solid-media based cultures. The strains belong to the genus Massilia, were evaluated for their effectiveness. Among them, Massilia sp. JJY02, was selected for its exceptional PHB degradation. PHB degradation was confirmed by monitoring changes in the physical and chemical properties of PHB films using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). After 20 days of cultivation with PHB film, Massilia sp. JJY02 achieved approximately 90% PHB degradation at 28 °C. All the novel strains were capable of producing carotenoid-type pigments and indole-acetic acid (IAA). Among them, Massilia sp. JJY03 and JJY04 showed phosphate solubilization activity. This study demonstrated that soil bacteria from eggplant have both PHB-degrading and plant growth promoting capabilities, marking the first instance of showing that species of Massilia can degrade PHB.

Bio-Based and Biodegradable Polymeric Materials for a Circular Economy

Nowadays, plastic contamination worldwide is a concerning reality that can be addressed with appropriate society education as well as looking for innovative polymeric alternatives based on the reuse of waste and recycling with a circular economy point of view, thus taking into consideration that a future world without plastic is quite impossible to conceive. In this regard, in this review, we focus on sustainable polymeric materials, biodegradable and bio-based polymers, additives, and micro/nanoparticles to be used to obtain new environmentally friendly polymeric-based materials. Although biodegradable polymers possess poorer overall properties than traditional ones, they have gained a huge interest in many industrial sectors due to their inherent biodegradability in natural environments. Therefore, several strategies have been proposed to improve their properties and extend their industrial applications. Blending strategies, as well as the development of composites and nanocomposites, have shown promising perspectives for improving their performances, emphasizing biopolymeric blend formulations and bio-based micro and nanoparticles to produce fully sustainable polymeric-based materials. The Review also summarizes recent developments in polymeric blends, composites, and nanocomposite plasticization, with a particular focus on naturally derived plasticizers and their chemical modifications to increase their compatibility with the polymeric matrices. The current state of the art of the most important bio-based and biodegradable polymers is also reviewed, mainly focusing on their synthesis and processing methods scalable to the industrial sector, such as melt and solution blending approaches like melt-extrusion, injection molding, film forming as well as solution electrospinning, among others, without neglecting their degradation processes.

Insights into the biodegradation of polyhydroxyalkanoates by the tropical marine isolate, Nocardiopsis dassonvillei NCIM 5124

In the current study, the ability of an indigenous marine Actinomycete Nocardiopsis dassonvillei (NCIM 5124) to degrade poly(3-hydroxybutyrate)-PHB was examined. From the whole genome sequencing data of the organism, information regarding the PHB depolymerase gene and amino acid sequence (Accession number: MCK9871921.1) was retrieved. In silico studies indicated the presence of a signal peptide characteristic of extracellular enzymes. ProtParam tool predicted that the protein had a molecular mass of 42.46 kDa with an isoelectric point of 4.51. Aliphatic and instability index values suggested that the protein was stable and the observed GARVY value indicated its hydrophilic nature. 3D structure prediction and multiple sequence alignments revealed the presence of Type I catalytic domain [including the oxyanion histidine towards the N terminal, the catalytic triad with serine (as a part of GLSAG pentapeptide), aspartate and histidine], substrate binding and linker domain. The organism was able to grow on PHB in solid and liquid media and effectively degrade it. Maximum enzyme activity (1.8 U/mL/min) was observed after 5 d of incubation in Bushnell Hass Medium containing 0.1% PHB, 1.5% sodium chloride, at 30 °C, pH 7.5 with agitation at 130 rpm. Application of the organism in disintegrating films of PHB and its copolymers was successfully demonstrated on the basis of weight loss and scanning electron microscope analysis. To the best of our knowledge, this is the first report on production of PHB depolymerase with high efficiency by N. dassonvillei, an organism that holds promise in degrading PHB-derived waste material.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-04079-3.

Plastic-Degrading Enzymes from Marine Microorganisms and Their Potential Value in Recycling Technologies

Since the 2005 discovery of the first enzyme capable of depolymerizing polyethylene terephthalate (PET), an aromatic polyester once thought to be enzymatically inert, extensive research has been undertaken to identify and engineer new biocatalysts for plastic degradation. This effort was directed toward developing efficient enzymatic recycling technologies that could overcome the limitations of mechanical and chemical methods. These enzymes are versatile molecules obtained from microorganisms living in various environments, including soil, compost, surface seawater, and extreme habitats such as hot springs, hydrothermal vents, deep-sea regions, and Antarctic seawater. Among various plastics, PET and polylactic acid (PLA) have been the primary focus of enzymatic depolymerization research, greatly enhancing our knowledge of enzymes that degrade these specific polymers. They often display unique catalytic properties that reflect their particular ecological niches. This review explores recent advancements in marine-derived enzymes that can depolymerize synthetic plastic polymers, emphasizing their structural and functional features that influence the efficiency of these catalysts in biorecycling processes. Current status and future perspectives of enzymatic plastic depolymerization are also discussed, with a focus on the underexplored marine enzymatic resources.

Enhancing biodegradation efficiency of PLA/PBAT-ST20 bioplastic using thermophilic bacteria co-culture system: New insight from structural characterization, enzyme activity, and metabolic pathways

The rising utilization of PLA/PBAT-ST20 presents potential ecological risks stemming from its casual disposal and incomplete degradation. To solve this problem, this study investigated the degradation capabilities of PLA/PBAT-ST20 by a co-culture system comprising two thermophilic bacteria, Pseudomonas G1 and Kocuria G2, selected and identified from the thermophilic phase of compost. Structural characterization results revealed that the strains colonized the PLA/PBAT-ST20's surface, causing holes and cracks, with an increase in the carbonyl index (CI) and polydispersity index (PDI), indicating oxidative degradation. Enzyme activity results demonstrated that the co-culture system significantly enhanced the secretion and activity of proteases and lipases, promoting the breakdown of ester bonds. LC-QTOF-MS results showed that various intermediate products were obtained after degradation, ultimately participating in the TCA cycle (ko00020), further completely mineralized. Additionally, after 15-day compost, the co-culture system achieved a degradation rate of 72.14 ± 2.1 wt% for PBAT/PLA-ST20 films, with a decrease in the abundance of plastic fragments of all sizes, demonstrating efficient degradation of PLA/PBAT-ST20 films. This study highlights the potential of thermophilic bacteria to address plastic pollution through biodegradation and emphasizes that the co-culture system could serve as an ideal solution for the remediation of PLA/PBAT plastics.

Toward a Circular Bioeconomy: Designing Microbes and Polymers for Biodegradation

Polymer production is rapidly increasing, but there are no large-scale technologies available to effectively mitigate the massive accumulation of these recalcitrant materials. One potential solution is the development of a carbon-neutral polymer life cycle, where microorganisms convert plant biomass to chemicals, which are used to synthesize biodegradable materials that ultimately contribute to the growth of new plants. Realizing a circular carbon life cycle requires the integration of knowledge across microbiology, bioengineering, materials science, and organic chemistry, which itself has hindered large-scale industrial advances. This review addresses the biodegradation status of common synthetic polymers, identifying novel microbes and enzymes capable of metabolizing these recalcitrant materials and engineering approaches to enhance their biodegradation pathways. Design considerations for the next generation of biodegradable polymers are also reviewed, and finally, opportunities to apply findings from lignocellulosic biodegradation to the design and biodegradation of similarly recalcitrant synthetic polymers are discussed.

Characterization of Ralstonia insidiosa C1 isolated from Alpine regions: Capability in polyhydroxyalkanoates degradation and production

This study ventures into the exploration of potential poly-3-hydroxybutyrate (PHB) degradation in alpine environments. PHB-degrading bacteria were identified in both campus soil, representing a residential area, and Mt. Kurodake soil, an alpine region in Hokkaido, Japan. Next-generation sequencing analysis indicated that the campus soil exhibited higher microbial diversity, while Ralstonia insidiosa C1, isolated from Mt. Kurodake soil, displayed the highest proficiency in PHB degradation. R. insidiosa C1 efficiently degraded up to 3% (w/v) of PHB and various films composed of other biopolymers at 14 °C. This bacterium synthesized homopolymers using substrates such as 3-hydroxybutyric acid, sugars, and acetic acid, while also produced copolymers using a mixture of fatty acids. The analysis results confirmed that the biopolymer synthesized by strain C1 using glucose was PHB, with physical properties comparable to commercial products. The unique capabilities of R. insidiosa C1, encompassing both the production and degradation of bioplastics, highlight its potential to establish a novel material circulation model.

Exploring the hidden environmental pollution of microplastics derived from bioplastics: A review

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes.

Fungal, but not bacterial, diversity and network complexity promote network stability during roadside slope restoration

To restore degraded roadside ecosystems, conventional methods such as revegetation and soil amendment are frequently employed. However, our understanding of the long-term effects of these restoration approaches on soil microbial diversity and network complexity across different vegetation types remains poor, which contributes to poor restoration outcomes. In this study, we explored the effects of roadside slope restoration on microbial communities across different vegetation types at varying stages of restoration. We found that restoration time had a more pronounced impact on microbial diversity than specific vegetation type. As restoration progressed, microbial network complexity and fungal diversity increased, but bacterial diversity declined, suggesting that keystone taxa may contribute to network complexity. Interestingly, bacterial network complexity increased concomitant with decreasing network modularity and robustness, which may compromise system stability. Distinct vegetation types were associated with restoration-sensitive microbial communities at different restoration stages. Leguminouse and nitrogen-fixing plants, such as Albiziak alkora, Ginkgo biloba, Rhus chinensis, Rhapis excels, and Rubia cordifolia exhibited such associations after five years of restoration. These keystone taxa included Proteobacteria, Actinobacteria, Chloroflexi, Gemmatimonadota, and Myxococcota. We also found that bacterial alpha diversity was significantly correlated with restoration time, soil pH, moisture, available phosphate, nitrate nitrogen, and plant height, while fungal diversity was primarily shaped by restoration time. Together, our findings suggest that soil properties, environmental factors, vegetation type, and dominant species can be manipulated to guide the trajectory of ecological recovery by regulating the abundance of certain microbial taxa.

Comprehensive Biodegradation Analysis of Chemically Modified Poly(3-hydroxybutyrate) Materials with Different Crystal Structures

This work presents a comprehensive analysis of the biodegradation of polyhydroxybutyrate (PHB) and chemically modified PHB with different chemical and crystal structures in a soil environment. A polymer modification reaction was performed during preparation of the chemically modified PHB films, utilizing 2,5-dimethyl-2,5-di(tert-butylperoxy)-hexane as a free-radical initiator and maleic anhydride. Films of neat PHB and chemically modified PHB were prepared by extrusion and thermocompression. The biological agent employed was natural mixed microflora in the form of garden soil. The course and extent of biodegradation of the films was investigated by applying various techniques, as follows: a respirometry test to determine the production of carbon dioxide through microbial degradation; scanning electron microscopy (SEM); optical microscopy; fluorescence microscopy; differential scanning calorimetry (DSC); and X-ray diffraction (XRD). Next-generation sequencing was carried out to study the microbial community involved in biodegradation of the films. Findings from the respirometry test indicated that biodegradation of the extruded and chemically modified PHB followed a multistage (2-3) course, which varied according to the spatial distribution of amorphous and crystalline regions and their spherulitic morphology. SEM and polarized optical microscopy (POM) confirmed that the rate of biodegradation depended on the availability of the amorphous phase in the interspherulitic region and the width of the interlamellar region in the first stage, while dependence on the size of spherulites and thickness of spherulitic lamellae was evident in the second stage. X-ray diffraction revealed that orthorhombic α-form crystals with helical chain conformation degraded concurrently with β-form crystals with planar zigzag conformation. The nucleation of PHB crystals after 90 days of biodegradation was identified by DSC and POM, a phenomenon which impeded biodegradation. Fluorescence microscopy evidenced that the crystal structure of PHB affected the physiological behavior of soil microorganisms in contact with the surfaces of the films.

A strategy to promote the convenient storage and direct use of polyhydroxybutyrate-degrading Bacillus sp. JY14 by lyophilization with protective reagents

BACKGROUND

Bioplastics are attracting considerable attention, owing to the increase in non-degradable waste. Using microorganisms to degrade bioplastics is a promising strategy for reducing non-degradable plastic waste. However, maintaining bacterial viability and activity during culture and storage remains challenging. With the use of conventional methods, cell viability and activity was lost; therefore, these conditions need to be optimized for the practical application of microorganisms in bioplastic degradation. Therefore, we aimed to optimize the feasibility of the lyophilization method for convenient storage and direct use. In addition, we incoporated protective reagents to increase the viability and activity of lyophilized microorganisms. By selecting and applying the best protective reagents for the lyophilization process and the effects of additives on the growth and PHB-degrading activity of strains were analyzed after lyophilization. For developing the lyophilization method for protecting degradation activity, it may promote practical applications of bioplastic-degrading bacteria.

RESULTS

In this study, the polyhydroxybutyrate (PHB)-degrading strain, Bacillus sp. JY14 was lyophilized with the use of various sugars as protective reagents. Among the carbon sources tested, raffinose was associated with the highest cell survival rate (12.1%). Moreover, 7% of raffionose showed the highest PHB degradation yield (92.1%). Therefore, raffinose was selected as the most effective protective reagent. Also, bacterial activity was successfully maintained, with raffinose, under different storage temperatures and period.

CONCLUSIONS

This study highlights lyophilization as an efficient microorganism storage method to enhance the applicability of bioplastic-degrading bacterial strains. The approach developed herein can be further studied and used to promote the application of microorganisms in bioplastic degradation.

Polyhydroxyalkanoates: the natural biopolyester for future medical innovations

Polyhydroxyalkanoates (PHAs) are a family of natural microbial biopolyesters with the same basic chemical structure and diverse side chain groups. Based on their excellent biodegradability, biocompatibility, thermoplastic properties and diversity, PHAs are highly promising medical biomaterials and elements of medical devices for applications in tissue engineering and drug delivery. However, due to the high cost of biotechnological production, most PHAs have yet to be applied in the clinic and have only been studied at laboratory scale. This review focuses on the biosynthesis, diversity, physical properties, biodegradability and biosafety of PHAs. We also discuss optimization strategies for improved microbial production of commercial PHAs via novel synthetic biology tools. Moreover, we also systematically summarize various medical devices based on PHAs and related design approaches for medical applications, including tissue repair and drug delivery. The main degradation product of PHAs, 3-hydroxybutyrate (3HB), is recognized as a new functional molecule for cancer therapy and immune regulation. Although PHAs still account for only a small percentage of medical polymers, up-and-coming novel medical PHA devices will enter the clinical translation stage in the next few years.

Poly(3-hydroxybutyrate) Degradation by Bacillus infantis sp. Isolated from Soil and Identification of phaZ and bdhA Expressing PHB Depolymerase

Poly(3-hydroxybutyrate) (PHB) is a biodegradable and biocompatible bioplastic. Effective PHB degradation in nutrient-poor environments is required for industrial and practical applications of PHB. To screen for PHB-degrading strains, PHB double-layer plates were prepared and three new Bacillus infantis species with PHB-degrading ability were isolated from the soil. In addition, phaZ and bdhA of all isolated B. infantis were confirmed using a Bacillus sp. universal primer set and established polymerase chain reaction conditions. To evaluate the effective PHB degradation ability under nutrient-deficient conditions, PHB film degradation was performed in mineral medium, resulting in a PHB degradation rate of 98.71% for B. infantis PD3, which was confirmed in 5 d. Physical changes in the degraded PHB films were analyzed. The decrease in molecular weight due to biodegradation was confirmed using gel permeation chromatography and surface erosion of the PHB film was observed using scanning electron microscopy. To the best of our knowledge, this is the first study on B. infantis showing its excellent PHB degradation ability and is expected to contribute to PHB commercialization and industrial composting.

Revealing the key gene involved in bioplastic degradation from superior bioplastic degrader Bacillus sp. JY35

The use of bioplastics, which can alleviate environmental pollution caused by non-degradable bioplastics, has received attention. As there are many types of bioplastics, method that can treat them simultaneously is important. Therefore, Bacillus sp. JY35 which can degrade different types of bioplastics, was screened in previous study. Most types of bioplastics, such as polyhydroxybutyrate (PHB), (P(3HB-co-4HB)), poly(butylene adipate-co-terephthalate) (PBAT), polybutylene succinate (PBS), and polycaprolactone (PCL), can be degraded by esterase family enzymes. To identify the genes that are involved in bioplastic degradation, analysis with whole-genome sequencing was performed. Among the many esterase enzymes, three carboxylesterase and one triacylglycerol lipase were identified and selected based on previous studies. Esterase activity using p-nitrophenyl substrates was measured, and the supernatant of JY35_02679 showed strong emulsion clarification activity compared with others. In addition, when recombinant E. coli was applied to the clear zone test, only the JY35_02679 gene showed activity in the clear zone test with bioplastic containing solid cultures. Further quantitative analysis showed 100 % PCL degradation at 7 days and 45.7 % PBS degradation at 10 days. We identified a gene encoding a bioplastic-degrading enzyme in Bacillus sp. JY35 and successfully expressed the gene in heterologous E. coli, which secreted esterases with broad specificity.

Bacterial degradation kinetics of poly(Ɛ-caprolactone) (PCL) film by Aquabacterium sp. CY2-9 isolated from plastic-contaminated landfill

Despite the identification of numerous bioplastic-degrading bacteria, the inconsistent rate of bioplastic degradation under differing cultivation conditions limits the intercomparison of results on biodegradation kinetics. In this study, we isolated a poly (Ɛ-caprolactone) (PCL)-degrading bacterium from a plastic-contaminated landfill and determined the principle-based biodegradation kinetics in a confined model system of varying cultivation conditions. Bacterial degradation of PCL films synthesized by different polymer number average molecular weights (M_n) and concentrations (% w/v) was investigated using both solid and liquid media at various temperatures. As a result, the most active gram-negative bacterial strain at ambient temperature (28 °C), designated CY2-9, was identified as Aquabacterium sp. Based on 16 S rRNA gene analysis. A clear zone around the bacterial colony was apparently exhibited during solid cultivation, and the diameter sizes increased with incubation time. During biodegradation processes in the PCL film, the thermal stability declined (determined by TGA; weight changes at critical temperature), whereas the crystalline proportion increased (determined by DSC; phase transition with temperature increment), implying preferential degradation of the amorphous region in the polymer structure. The surface morphologies (determined by SEM; electron optical system) were gradually hydrolyzed, creating destruction patterns as well as alterations in functional groups on film surfaces (determined by FT-IR; infrared spectrum of absorption or emission). In the kinetic study based on the weight loss of the PCL film (4.5 × 10⁴ Da, 1% w/v), ∼1.5 (>±0.1) × 10^-1 day^-1 was obtained from linear regression for both solid and liquid media cultivation at 28 °C. The biodegradation efficiencies increased proportionally by a factor of 2.6-7.9, depending on the lower polymer number average molecular weight and lower concentration. Overall, our results are useful for measuring and/or predicting the degradation rates of PCL films by microorganisms in natural environments.

Biodeterioration of Microplastics by Bacteria Isolated from Mangrove Sediment

As a kind of ubiquitous emerging pollutant, microplastics (MPs) are persistent in the environment and have a large impact on the ecosystem. Fortunately, some microorganisms in the natural environment can degrade these persistent MPs without creating secondary pollution. In this study, 11 different MPs were selected as carbon sources to screen the microorganisms for degradable MPs and explore the possible mechanism of degradation. After repeated domestication, a relatively stable microbial community was obtained after approximately 30 days later. At this time, the biomass of the medium ranged from 88 to 699 mg/L. The growth of bacteria with different MPs ranged from 0.030 to 0.090 optical density (OD) 600 of the first generation to 0.009-0.081 OD 600 of the third generation. The weight loss method was used to determine the biodegradation ratios of different MPs. The mass losses of polyhydroxybutyrate (PHB), polyethylene (PE), and polyhydroxyalkanoate (PHA) were relatively large, at 13.4%, 13.0%, and 12.7%, respectively; these figures for polyvinyl chloride (PVC) and polystyrene (PS) were relatively slight, 8.90% and 9.10%, respectively. The degradation half-life (t_1/2) of 11 kinds of MPs ranges from 67 to 116 days. Among the mixed strains, Pseudomonas sp., Pandoraea sp., and Dyella sp. grew well. The possible degradation mechanism is that such microbial aggregates can adhere to the surface of MPs and form complex biofilms, secrete extracellular and intracellular enzymes, etc., break the hydrolyzable chemical bonds or ends of molecular chains by attacking the plastic molecular chains, and produce monomers, dimers, and other oligomers, leading to the reduction of the molecular weight of the plastic itself.

Fluorescence tracing the degradation process of biodegradable PBAT: Visualization and high sensitivity

Biodegradable plastics have emerged as a potential solution to the mounting plastic pollution crisis. However, current methods for evaluating the degradation of these plastics are limited in detecting structural changes rapidly and accurately, particularly for PBAT, which contains worrying benzene rings. Inspired by the fact that the aggregation of conjugated groups can endow polymers with intrinsic fluorescence, this work found that PBAT emits a bright blue-green fluoresces under UV irradiation. More importantly, we pioneered a degradation evaluation approach to track the degradation process of PBAT via fluorescence. A blue shift of fluorescence wavelength as the thickness and molecular weight of PBAT film decreased during degradation in an alkali solution was observed. Additionally, the fluorescence intensity of the degradation solution increased gradually as the degradation progressed, and was found to be exponentially correlated with the concentration of benzene ring-containing degradation products following filtration with the correlation coefficient is up to 0.999. This study proposes a promising new strategy for monitoring the degradation process with visualization and high sensitivity.

Environmental sporobiota: Occurrence, dissemination, and risks

Spore-forming bacteria known as sporobiota are widespread in diverse environments from terrestrial and aquatic habitats to industrial and healthcare systems. Studies on sporobiota have been mainly focused on food processing and clinical fields, while a large amount of sporobiota exist in natural environments. Due to their persistence and capabilities of transmitting virulence factors and antibiotic resistant genes, environmental sporobiota could pose significant health risks to humans. These risks could increase as global warming and environmental pollution has altered the life cycle of sporobiota. This review summarizes the current knowledge of environmental sporobiota, including their occurrence, characteristics, and functions. An interaction network among clinical-, food-related, and environment-related sporobiota is constructed. Recent and effective methods for detecting and disinfecting environmental sporobiota are also discussed. Key problems and future research needs for better understanding and reducing the risks of environmental sporobiota and sporobiome are proposed.

Anaerobic Biodegradability of Commercial Bioplastic Products: Systematic Bibliographic Analysis and Critical Assessment of the Latest Advances

Bioplastics have entered everyday life as a potential sustainable substitute for commodity plastics. However, still further progress should be made to clarify their degradation behavior under controlled and uncontrolled conditions. The wide array of biopolymers and commercial blends available make predicting the biodegradation degree and kinetics quite a complex issue that requires specific knowledge of the multiple factors affecting the degradation process. This paper summarizes the main scientific literature on anaerobic digestion of biodegradable plastics through a general bibliographic analysis and a more detailed discussion of specific results from relevant experimental studies. The critical analysis of literature data initially included 275 scientific references, which were then screened for duplication/pertinence/relevance. The screened references were analyzed to derive some general features of the research profile, trends, and evolution in the field of anaerobic biodegradation of bioplastics. The second stage of the analysis involved extracting detailed results about bioplastic degradability under anaerobic conditions by screening analytical and performance data on biodegradation performance for different types of bioplastic products and different anaerobic biodegradation conditions, with a particular emphasis on the most recent data. A critical overview of existing biopolymers is presented, along with their properties and degradation mechanisms and the operating parameters influencing/enhancing the degradation process under anaerobic conditions.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Acceleration of Polybutylene Succinate Biodegradation by Terribacillus sp. JY49 Isolated from a Marine Environment

Polybutylene succinate (PBS) is a bioplastic substitute for synthetic plastics that are made from petroleum-based products such as polyethylene and polypropylene. However, the biodegradation rate of PBS is still low and similar to that of polylactic acid (PLA). Moreover, our knowledge about degrader species is limited to a few fungi and mixed consortia. Here, to identify a bacterial degrader to accelerate PBS degradation, we screened and isolated Terribacillus sp. JY49, which showed significant degradability. In order to optimize solid and liquid culture conditions, the effect of factors such as temperature, additional carbon sources, and salt concentrations on degradation was confirmed. We observed a degradation yield of 22.3% after 7 days when adding 1% of glucose. Additionally, NaCl was added to liquid media, and degradation yield was decreased but PBS films were broken into pieces. Comparing the degree of PBS degradation during 10 days, the degradation yield was 31.4% after 10 days at 30 °C. Alteration of physical properties of films was analyzed by using scanning electron microscopy (SEM), gel permeation chromatography (GPC), and Fourier transform infrared (FT-IR). In addition, Terribacillus sp. JY49 showed clear zones on poly(butylene adipate-co-terephthalate) (PBAT), polycaprolactone (PCL), and copolymers such as P(3HB-co-3HV) and P(3HV-co-4HB), exhibiting a broad spectrum of degradation activities on bioplastics. However, there was no significant difference in absorbance when esterase activity was examined for different types of bioplastics. Overall, Terribacillus sp. JY49 is a potential bacterial strain that can degrade PBS and other bioplastics, and this is the first report of Terribacillus sp. as a bioplastic degrader.

Finding a Benign Plasticizer to Enhance the Microbial Degradation of Polyhydroxybutyrate (PHB) Evaluated by PHB Degrader Microbulbifer sp. SOL66

As a biodegradable plastic, polyhydroxybutyrate (PHB) has relatively poor mechanical properties, preventing its wider use. Various plasticizers have been studied to improve the mechanical properties of PHB; however, due to the slow degradation speed in the soil environment and lack of evaluation methods, studies on the degradation of PHB with plasticizers are rarely reported. In this study, by applying Microbulbifer sp. SOL66, which is able to degrade PHB very quickly, a benign plasticizer was evaluated with good properties and good degradability, not inhibiting microbial activities. Eight different plasticizers were applied with PHB and Microbulbifer sp. SOL66, PHB film containing 10% and 20% tributyl citrate showed significant biodegradability of PHB. It was confirmed that tributyl citrate could increase the speed of PHB degradation by Microbulbifer sp. SOL66 by 88% at 1 day, although the degree of degradation was similar after 3 days with and without tributyl citrate. By the analysis of microbial degradation, physical, chemical, and mechanical properties, tributyl citrate was shown not only to improve physical, chemical, and mechanical properties but also the speed of microbial degradation.

Novel Poly(butylene adipate-co-terephthalate)-degrading Bacillus sp. JY35 from wastewater sludge and its broad degradation of various bioplastics

Poly(butylene adipate-co-terephthalate) (PBAT), a bioplastic consisting of aliphatic hydrocarbons and aromatic hydrocarbons, was developed to overcome the shortcomings of aliphatic and aromatic polyesters. Many studies report the use of PBAT as a blending material for improving properties of other bioplastics. However, there are few studies on microorganisms that degrade PBAT. We found six kinds of PBAT-degrading microorganisms from various soils. Among these, Bacillus sp. JY35 showed superior PBAT degradability and robustness to temperature. We monitored the degradation of PBAT films by Bacillus sp. JY35 using scanning electron microscopy, field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatography. GC-MS was used to measure the PBAT film degradation rate at different temperatures and with additional NaCl and carbon sources. Certain additional carbon sources improve the growth of Bacillus sp. JY35. However, this did not increase PBAT film degradation. Time-dependent PBAT film degradation rates were measured during three weeks of cultivation, after which the strain achieved almost 50% degradation. Additionally, various bioplastics were applied to solid cultures to confirm the biodegradation range of Bacillus sp. JY35, which can degrade not only PBAT but also PBS, PCL, PLA, PHB, P(3HB-co-4HB), P(3HB-co-3HV), P(3HB-co-3HHx), and P(3HB-co-3HV-co-3HHx), suggesting its usability as a superior bioplastic degrader.

Production and waste treatment of polyesters: application of bioresources and biotechniques

Chemical resources and techniques have long been used in the history of bulk polyester production and still dominate today's chemical industry. The sustainable development of the polyester industry demands more renewable resources and environmentally benign polyester products. Accordingly, the rapid development of biotechnology has enabled the production of an extensive range of aliphatic and aromatic polyesters from renewable bio-feedstocks. This review addresses the production of representative commercial polyesters (polyhydroxyalkanoates, polylactic acid, poly ε-caprolactone, polybutylene succinate, polyethylene terephthalate, polybutylene terephthalate, polypropylene terephthalate, polyethylene furandicarboxylate, polypropylene furandicarboxylate, and polybutylene furandicarboxylate) or their monomers (lactic acid, succinic acid, 1,4-butanediol, ethylene glycol, terephthalic acid, 1,3-propanediol, and 2,5-furandicarboxylic acid) from renewable bioresources. In addition, this review summarizes advanced biotechniques in the treatment of polyester wastes, representing the near-term trends and future opportunities for waste-to-value recycling and the remediation of polyester wastes under sustainable models. For future prospects, it is essential to further expand: non-food bioresources, optimize bioprocesses and biotechniques in the preparation of bioderived or biodegradable polyesters with promising: material performance, biodegradability, and low production cost.

Isolation of Microbulbifer sp. SOL66 with High Polyhydroxyalkanoate-Degrading Activity from the Marine Environment

Having the advantage of eco-friendly decomposition, bioplastics could be used to replace petroleum-based plastics. In particular, poly(3-hydroxybutyrate) (PHB) is one of the most commercialized bioplastics, however, necessitating the introduction of PHB-degrading bacteria for its effective disposal. In this study, Microbulbifer sp. SOL66 (94.18% 16S rRNA with similarity to Microbulbifer hydrolyticus) demonstrated the highest degradation activity among five newly screened Microbulbifer genus strains. Microbulbifer sp. SOL66 showed a rapid degradation yield, reaching 98% in 4 days, as monitored by laboratory scale, gas chromatography-mass spectrometry, scanning electron microscopy, gel permeation chromatography, and Fourier transform infrared spectroscopy. The PHB film was completely degraded within 7 days at 37 °C in the presence of 3% NaCl. When 1% xylose and 0.4% ammonium sulfate were added, the degradation activity increased by 17% and 24%, respectively. In addition, this strain showed biodegradability on pellets of poly(3-hydroxybutyrate-co-4-hydroxybutyrate), as confirmed by weight loss and physical property changes. We confirmed that Microbulbifer sp. SOL66 has a great ability to degrade PHB, and has rarely been reported to date.

A review on polyhydroxyalkanoate production from agricultural waste Biomass: Development, Advances, circular Approach, and challenges

Polyhydroxyalkanoates are biopolymers produced by microbial fermentation. They have excellent biodegradability and biocompatibility, which are regarded as promising substitutes for traditional plastics in various production and application fields. This review details the research progress in PHA production from lignocellulosic crop residues, lipid-type agricultural wastes, and other agro-industrial wastes such as molasses and whey. The effective use of agricultural waste can further reduce the cost of PHA production while avoiding competition between industrial production and food. The latest information on fermentation parameter optimization, fermentation strategies, kinetic studies, and circular approach has also been discussed. This review aims to analyze the crucial process of the PHA production from agricultural wastes to provide support and reference for further scale-up and industrial production.

Durability of Biodegradable Polymer Nanocomposites

Biodegradable polymers (BP) are often regarded as the materials of the future, which address the rising environmental concerns. The advancement of biorefineries and sustainable technologies has yielded various BP with excellent properties comparable to commodity plastics. Water resistance, high dimensional stability, processability and excellent physicochemical properties limit the reviewed materials to biodegradable polyesters and modified compositions of starch and cellulose, both known for their abundance and relatively low price. The addition of different nanofillers and preparation of polymer nanocomposites can effectively improve BP with controlled functional properties and change the rate of degradation. The lack of data on the durability of biodegradable polymer nanocomposites (BPN) has been the motivation for the current review that summarizes recent literature data on environmental ageing of BPN and the role of nanofillers, their basic engineering properties and potential applications. Various durability tests discussed thermal ageing, photo-oxidative ageing, water absorption, hygrothermal ageing and creep testing. It was discussed that incorporating nanofillers into BP could attenuate the loss of mechanical properties and improve durability. Although, in the case of poor dispersion, the addition of the nanofillers can lead to even faster degradation, depending on the structural integrity and the state of interfacial adhesion. Selected models that describe the durability performance of BPN were considered in the review. These can be applied as a practical tool to design BPN with tailored property degradationand durability.

Poly-β-Hydroxybutyrate Production by Rhodopseudomonas sp. Grown in Semi-Continuous Mode in a 4 L Photobioreactor

The synthesis of polyhydroxybutyrate (PHB) by photosynthetic non-sulfur bacteria is a potential approach for producing biodegradable plastics. In this work, acetate was used as a single carbon source to study the effect on PHB formation in Rhodopseudomonas sp. cultured in a cylindrical four-liter photobioreactor under semi-continuous mode. The cultivation process is divided into a symmetrical growth phase and a PHB accumulation phase separated temporally. The symmetrical growth phase (nutrient sufficient conditions) was followed by a sulfur-limited phase to promote PHB accumulation. The main novelty is the progressive lowering of the sulfur concentration into Rhodopseudomonas culture, which was obtained by two concomitant conditions: (1) sulfur consumption during the bacterial growth and (2) semi-continuous growth strategy. This caused a progressive lowering of the sulfur concentration into Rhodopseudomonas culturedue to the sulfur-free medium used to replace 2 L of culture (50% of the total) that was withdrawn from the photobioreactor at each dilution. The PHB content ranged from 9.26% to 15.24% of cell dry weight. At the steady state phase, the average cumulative PHB was >210 mg/L. Sulfur deficiency proved to be one of the most suitable conditions to obtain high cumulative PHB in Rhodopseudomonas culture.