Critical review of microplastics removal from the environment

The silent invasion of microplastics polyvinyl chloride and polyethylene terephthalate: Potential impact on osteoporosis

BACKGROUND

The relationship between the environment and diseases is a crucial and complex topic that has garnered significant attention in recent years. In our study, we also follow the thread and explore the correlation between microplastics (MPs) and osteoporosis (OP).

METHODS AND RESULTS

We found that MPs were detected in the blood samples of nearly all participants. Moreover, It was compelling that PVC and PET emerged as the most common MP polymers in our study. A verification process was conducted comparing the clinical data with the results of MPs detection. This analysis revealed a significant exposure risk to MPs from sources such as bottled water, take-out containers. Through molecular biology techniques, we confirmed that MPs have a significant toxic effect on osteoblasts and associated with abnormal gene expression.

CONCLUSION

MPs may be considered to have a potential correlation with the progression of OP.

Dynamics and Impacts of Microplastics (MPs) and Nanoplastics (NPs) on Ecosystems and Biogeochemical Processes: The Need for Robust Regulatory Frameworks

Microplastics (MPs) and nanoplastics (NPs) pose significant threats to aquatic and terrestrial ecosystems, disrupting nutrient cycling, altering soil properties, and affecting microbial communities. MPs and NPs bioaccumulate and contribute to global nutrient and water cycle disruptions, intensifying the impact of climate change. Despite the widespread use of plastics, inadequate plastic waste management leads to persistent environmental pollution. Toxic compounds are transported by MPs and NPs, affecting food chains, nutrient cycles, and overall ecosystem health. MPs impact soil biogeochemistry, microbial activity, and greenhouse gas emissions by altering the nitrogen and carbon cycles. One of the largest gaps in microplastic (MP) research today is the lack of standardized sampling and analytical methods. This lack of standardization significantly complicates the comparison of results across different studies. Multidisciplinary research and strict regulatory measures are needed to address MP pollution. This review highlights the critical need for mitigation methods to maintain ecosystem integrity and suggests standardization of sampling and data analysis. It offers insights into MP distribution, best practices for data analysis, and the impacts and interactions of MPs with biogeochemical processes. The Environmental Protection Agency has identified a critical need to improve the identification of nanoplastics. Particles smaller than 10 μm become increasingly difficult to quantify using standard MP detection practices.

Transport of microplastic-antibiotic co-contaminants in tidal zones

Microplastics (MPs) and antibiotics (ATs) are emerging contaminants with recognized negative effects on marine ecosystems. MPs can adsorb and transport ATs, posing combined toxic effects to marine organisms. Despite growing concerns, research remains limited on the MP-AT co-contaminants in tidal zones, which are home to numerous aquatic species and represent a particularly susceptible ecosystem. This study used polyethylene (PE) MPs and tetracycline (TC) to investigate the influence under various conditions, including sediment sizes, tidal cycles, and MP sizes, on the transport of MP-AT co-contaminants in tidal zones using a tidal cycle simulation system, which was designed to replicate the tidal dynamics and provide insights into the movement and behavior of contaminants. It was observed that MP-AT co-contaminants in tidal sediments exist in three distinct transport states. Smaller MP-AT co-contaminants (State 1) pass through sand pores and are widely distributed in the upper sediment layers, whereas larger MP-AT co-contaminants (State 2) concentrate in layers 1-5 due to size limitations. Agglomerated MP-AT co-contaminants (State 3), unable to pass through sand pores, accumulate at the bottom. Tidal cycles enhance MP-AT co-contaminant retention, while sand size (125-212 μm) limitedly affects their distribution. MP size played a crucial role, with larger MPs settling in layers 1-5 and smaller MPs remaining more dispersed. These findings emphasize the importance of MP size in affecting contaminant transport in tidal environments. Results from this research will contribute to the development of transport models and help predict the long-term environmental impact of MP-AT co-contaminants.

Impact of Heterosigma akashiwo on the environmental behavior of microplastics: Aggregation, sinking, and resuspension dynamics

Aggregation processes of microalgae have significant effects on the vertical distribution of microplastics (MPs) in the marine environment. This study explored how the harmful microalga Heterosigma akashiwo affects the aggregation and sinking characteristics of four types of MPs: low and high-density polyethylene (PE) spheres, and small and large polypropylene (PP) fragments. The aggregation of MPs was primarily driven by extracellular polymeric substances (EPS) rather than direct attachment to the cells, contributing to their sinking. The sinking of low-density PE spheres followed a logistic function, saturating at 28 % with a half-saturation time of 9 days. In contrast, small PP fragments sank minimally (under 2 %) and large PP fragments showed almost no sinking, indicating the varying impacts of MP density and size. The sinking velocity of the MP aggregates was significantly lower for low-density PE spheres (0.63 mm∙s-1) than for high-density PE spheres (0.81 mm∙s-1), despite no significant differences in aggregate size or MP particle number. This result may suggest that low-density MPs could potentially affect marine carbon cycle. Furthermore, no clear evidence was found for the resuspension of the settled aggregates due to bacterial decomposition under dark and cold conditions. As the first experimental study to explore the aggregation, sinking, and resuspension of different MPs in the presence of H. akashiwo, these findings, when integrated with field observations and modeling studies, provide valuable insights for predicting MP distribution in marine environments.

Microplastics in our diet: A growing concern for human health

Microplastics (MPs), particles smaller than 5 mm, are widely distributed in the environment, raising concerns about their long-term human health impact. MPs can enter the human food chain through various sources, including drinking water, salt, plant-based derived products, animal-based derived products (especially seafood), alcoholic beverages, and packaged food. Once in the human body, MPs have been detected in various biological tissues and secretions, such as feces, blood, semen, breastmilk, thrombi, colon, atheroma, and liver, highlighting their capacity for bioaccumulation. The most commonly identified polymers include polyethylene (PE), polypropylene (PP), and polystyrene (PS), along with others such as polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polymethyl methacrylate (PMMA). This review presents a perspective on underexplored food contamination by MPs, discussing the presence of these plastic fragments in human biological systems and discussing in vivo studies that investigate their potential health risks. Emerging evidence links MPs to inflammatory responses, oxidative stress, and cellular dysfunction, potentially contributing to gastrointestinal disorders, neurotoxicity, reproductive toxicity, and cardiovascular risks. Key knowledge gaps persist for understanding health impacts under environmental relevant conditions, particularly regarding long-term exposure, particle size effects, chemical composition, and interactions with environmental pollutants. Addressing these challenges requires the development of advanced experimental models and human-relevant tissue studies, to improve understanding of MPs bioaccumulation, toxicity, and mechanisms of action. This work underscores the urgency of mitigating MP exposure and advancing studies to better understand their real implications for human health.

Remediation of Micro- and Nanoplastics by Membrane Technologies

Micro- and nanoplastics (NPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane processes, one of the advanced treatment technologies, are the most effective and promising technologies for the removal of microplastics (MPs) from water and wastewater. In this article, firstly, the properties of MPs commonly found in water and wastewater treatment and their removal efficiencies are briefly reviewed. In addition, research on the use of microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBR) for the remediation of MPs and NPs from water/wastewater is reviewed, and the advantages/disadvantages of each removal method are discussed. Membrane filtration is also compared with other methods used to remove MPs. Furthermore, the problem of membrane fouling by MPs during filtration and the potential for MPs to be released from the polymeric membrane structure are discussed. Finally, based on the literature survey, the current status and gaps in research on MPs removal by membrane technologies are identified, and recommendations for further research are made.

Interactions between the co-contamination system of oxcarbazepine-polypropylene microplastics and Chlorella sp. FACHB-9: Toxic effects and biodegradation

The co-contamination of microplastics and pharmaceutical pollutants has attracted increasing attention. However, studies on the joint toxicity of pollutants on organisms in aquatic ecosystems are still lacking. This study aimed to investigate the joint toxicity of oxcarbazepine (OXC, 30 mg/L) and polypropylene microplastics (PP-MPs, 500 mg/L and particle size of 180 μm) microplastics on microalgae (Chlorella sp. FACHB-9) and the biodegradation of OXC by strain FACHB-9. Compared to the single OXC exposure, the cell density of microalgae was decreased by 38.93% in OXC/PP-MPs co-contamination system, with enhanced oxidative stress and decreased photosynthetic efficiency. Transcriptomic analyses indicated that photosynthetic pathways and TCA cycle pathways were significantly inhibited, while DNA damage repair pathways were up regulated in microalgae co-exposed to OXC and PP-MPs. Moreover, strain FACHB-9 showed a remarkable degradation effect (91.61% and 86.27%) on OXC in single and mixture group, respectively. These findings significantly expanded the existing knowledge on the joint toxicity of pollutants on microalgae, indicating prospective promise of microalgae for the bioremediation of polluted aquatic environments.

Impact of plastic pollution on ecosystems: a review of adverse effects and sustainable solutions

The primary source of the growing concern regarding marine, aquatic, and land pollution is plastic products, the majority of which are made of synthetic or semi-synthetic organic compounds. These combinations include materials like coal and natural gas that are obtained through petrochemical processes. As these two types of plastic-derived products are produced and disposed of, they have a major impact on the ecosystems. According to recent figures, around 400 million tons of plastic and related products derived from plastic are produced annually, and it became double in the last two decades. Plastic pollutants are introduced into ecosystems by a variety of stakeholders at different points in their daily lives, whether intentionally or accidentally. They have become a major source of adverse effects, toxicity development in natural entities, and problems. The aquatic, marine, and land ecosystems are vital to human existence, which emphasizes how difficult it is to stop pollution from it. This review highlights the adverse impacts of plastics, plastic-based products, and micro-nanoplastics on aquatic, terrestrial, and marine ecosystems while addressing advances in biodegradable plastics, recycling innovations, plastic-degrading enzymes, and sustainable solutions to reduce environmental risks.

Microplastics in freshwater ecosystems: probabilistic environmental risk assessment and current knowledge in occurrence and ecotoxicological studies

Ecotoxicological studies involving microplastics (MPs) conducted on a laboratory scale may not always accurately mirror real environmental conditions (types, sizes, shapes, and concentrations of MPs). This review primarily focused on examining studies that investigated the prevalence of MPs in freshwater environments and accumulation in organisms worldwide, considering important factors such as morphology, particle size, and the specific polymer types involved. This review also encompassed ecotoxicological studies related to MPs, and ecological risk analyses were carried out based on the obtained ecotoxicological data. Based on the extensive dataset collected, we determined the hazardous concentration for 5% of the tested organisms (HC5) and estimated for the first time a predicted noneffect concentration (PNEC) value for two distinct types of MPs polymers: polystyrene (PS) and polyethylene (PE), based on the species sensitive distribution (SSD) curves obtained from nonobserved concentration (NOEC) values, with 0.003 mg L-1 for PS and 0.011 mg L-1 for PE. Furthermore, another PNEC value for 7 types of MPs (PE, PS, polyvinyl chloride, PA6, polyester, polyethylene terephthalate, and ethylene acrylic acid copolymer (EEA copolymer)) was calculated (0.0027 mg L-1 or 2.61 particles L-1). Subsequently, the risk quotient (RQ) was computed utilizing data obtained from the measured environmental concentrations of 18 places. An RQ value of 0.094 was obtained, inferring that MPs have a low-risk potential globally. However, when the RQ values were examined for each country separately, they exhibited significant variability (RQ = 22.06 in Malaysia and 0.000008 in Australia). Overall, this review provides a comprehensive overview of the current knowledge on MP abundance in freshwater environments, the associated ecotoxicological research to reinforce the outcomes derived from the risk analysis, and their accumulation in biota.

Dissemination of antibiotic-resistant bacteria associated with microplastics collected from Monastir and Mahdia coasts (Tunisia)

The exponential use of plastics and their recalcitrant nature leads to their significant accumulation in the environment. The occurrence of plastic wastes is considered as a serious environmental problem. Additionally, plastic wastes can break down into smaller pieces called microplastics (MPs), leading to further interactions with the environment and living organisms. In this study, sixty-six strains were isolated from microplastic particles collected on different coastal areas of Monastir and Mahdia (Tunisia). The different bacterial isolates were identified according to some biochemical tests such as catalase, oxidase, and were subjected to molecular characterization. Amplification of the internal transcribed spacer (ITS) revealed the presence of 31 ITS haplotypes. The partial sequencing of the 16S ribosomal DNA of representative strains was analyzed. The majority of bacterial isolates (84.31 %) belonged to Gamma-proteobacteria (84.78 %), while the remaining isolates were affiliated to Firmicutes (15.21 %). The microplastic-associated bacterial isolates belonged to 10 genera, namely Acinetobacter, Pseudomonas, Bacillus, Staphylococcus, Shewanella, Aeromonas, Vibrio, Stutzerimonas, Exiguobacterium, Enterobacter. Among the well-represented Acinetobacter genus, the most common species identified was Acinetobacter johnsonii. Susceptibility patterns of these strains were studied against 21 antibiotics commonly used in Tunisia. A high level of antibiotic resistance was observed for Penicillin G (97.82 %) and Temocillin (86.95 %). S26 strain presented the highest multidrug resistance with a multiple antibiotic resistance (MAR) index of 0.71.

Recent advances in mechanistic insights into microplastics mitigation strategies via emerging advanced oxidation processes: Legislation, challenges, and future direction

Microplastics (MPs) pollution has emerged as a global environmental concern due to its detrimental impacts on ecosystems. Conventional wastewater/water treatment methods are inadequate for MPs removal due to their diminutive size ranging from micrometers to nanometers. Advanced oxidation processes (AOPs) have gained attention as a promising green strategy for the efficient and safe elimination of MPs from aqueous systems. In recent years, various AOPs, including direct photo-degradation, photocatalytic oxidation, electrochemical oxidation, sono-chemical oxidation, ozonation, as well as sulfate radicals-based AOPs (SR-AOPs), and the use of hybrid systems have all been extensively investigated for MP elimination. However, the molecular mechanisms of MP polymer chain scission by AOPs have not been thoroughly studied so far. In this review, we have attempted to provide a thorough overview of molecular mechanisms and highlighted recent advances in the degradation of commonly used MP by AOPs. The characteristics and limitations of each technique are thoroughly examined. Additionally, current policies and legislation on plastic pollution are discussed, emphasizing the need for regulatory frameworks to support effective MPs mitigation strategies. To advance the practical application of AOPs for MPs removal, future research direction should address the transition from controlled laboratory environments to complex field conditions, assess the sustainability of AOPs in terms of catalytic material design, selection of effective oxidants, power consumption, and operational costs. Given these challenges, recommendations for future research directions are proposed based on knowledge gaps in the reported literature. This review could offer a coherent summary of the molecular mechanisms involved in different MP elimination techniques, aiding in the advancement of more dependable AOPs technology with superior removal and degradation efficiency.

Traversing the potential of phytoremediation and phycoremediation as pioneering technologies in microplastic mitigation - A critical review

With the advent of numerous reports related to health and environmental hazards associated with microplastics (MPs), scientists have been engrossed in developing sustainable technologies for MP mitigation. Conventional methods for the remediation of MPs have several limitations, but with the increasing demand for biological mitigation methods, the latest technologies are prioritized. Among biological-driven methods, phytoremediation and phycoremediation are the two peaking approaches that have gained momentum because of their eco-friendliness, cost-effectiveness, and recyclability options. Investigations of the mechanisms underlying phytoremediation and phycoremediation processes can provide possible insights into practical applications in the present scenario. Modern instrumentation is a prerequisite for identifying and characterizing MPs and quantifying their removal efficiency. The current investigation highlights a unique combination of elaborate discussions on the use of plants in the mitigation of MPs, bibliometric analysis of the current status of research, their relevance to the modern context, and the development of a combinatorial strategy to amalgamate the advantages of these two unique processes via the concept of constructed wetlands for synergistically mitigating MPs. Thus, this review provides fresh insights into addressing MP pollution with sustainable ideologies to achieve improved mitigation outcomes without compromising the balance of the ecosystem.

Significant effects of rural wastewater treatment plants in reducing microplastic pollution: A perspective from China's southwest area

Sewage systems are a major source for microplastics in riverine exports to oceans. Urban areas are generally considered hotspots for microplastic discharge, whereas emissions from rural areas remain largely understudied. Hence, this study investigated the abundance, characteristics, and polymer types of microplastics in rural wastewater treatment plants (WWTPs) in Guiyang and estimated the annual microplastic emissions of China based on sewage discharge. The influent abundance of microplastics was 3.8-8.2 items/L, the effluent abundance was 3.1-5.9 items/L, with a lower removal rate of 14.4 %-54.6 %, which might be influenced by lower operating loads and influent concentrations. Raman spectroscopy analysis revealed that polyvinyl alcohol (PVA) was the predominant polymer type. Rural WWTPs were more effective at removing large-sized particles (> 0.1 mm) and films, resulting in higher removal effectiveness by weight (49.1 %) compared to urban WWTPs (30.8 %). Based on the abundance of microplastics in WWTPs within the study area and China's annual sewage discharge, this study estimated the microplastic emissions released through sewage in China in 2022. The annual microplastic emissions through sewage in China were estimated to be 2995.7 tons, with rural and urban areas contributing 25.1 % and 74.9 %, respectively. Approximately 724.8 tons and 1001.6 tons of microplastics were removed from rural and urban WWTPs, respectively. This work indicates the unignorable emissions of microplastics from rural sewage and highlights the crucial role of rural WWTPs in reducing microplastic pollution.

Cutting-edge developments in plastic biodegradation and upcycling via engineering approaches

The increasing use of plastics has resulted in the production of high quantities of plastic waste that pose a serious risk to the environment. The upcycling of plastics into value-added products offers a potential solution for resolving the plastics environmental crisis. Recently, various microorganisms and their enzymes have been identified for their ability to degrade plastics effectively. Furthermore, many investigations have revealed the application of plastic monomers as carbon sources for bio-upcycling to generate valuable materials such as biosurfactants, bioplastics, and biochemicals. With the advancement in the fields of synthetic biology and metabolic engineering, the construction of high-performance microbes and enzymes for plastic removal and bio-upcycling can be achieved. Plastic valorization can be optimized by improving uptake and conversion efficiency, engineering transporters and enzymes, metabolic pathway reconstruction, and also using a chemo-biological hybrid approach. This review focuses on engineering approaches for enhancing plastic removal and the methods of depolymerization and upcycling processes of various microplastics. Additionally, the major challenges and future perspectives for facilitating the development of a sustainable circular plastic economy are highlighted.

Insight into the removal of nanoplastics and microplastics by physical, chemical, and biological techniques

Plastic pollutants create health crises like physical damage to tissues, upset reproductive processes, altered behaviour, oxidative stress, neurological disorders, DNA damage, gene expression, and disrupt physiological functions, as the biosphere accumulates them inadvertently through the food web. Water resources have become the generic host of plastic wastes irrespective of their particle size, resulting in widespread distribution in aquatic environments. The pre-treatment step of the traditional water treatment process can easily remove coarse-sized plastic wastes. However, the fine plastic particles, with sizes ranging from nanometres to millimetres, are indifferent to the traditional water treatment. To address the escalating problems, the upgradation of different traditional physical, chemical, and biological remediation techniques offers a promising avenue for tackling tiny plastic particles from the water environment. Further, new techniques and hybrid incorporations to the existing water treatment techniques have been explored, specifically removing tiny plastic debris. A detailed understanding of the sources, fate, and impact of plastic wastes in the environment, as well as an evaluation of the above treatment techniques and their limitations and challenges, can only show the way for their upgradation, hybridization, and development of new techniques. This review paper provides a comprehensive overview of the current knowledge and techniques for the remediation of nanoplastics and microplastics.

Development of a Fast and Efficient Strategy Based on Nanomagnetic Materials to Remove Polystyrene Spheres from the Aquatic Environment

Microplastics contamination is growing globally, being a risk for different environmental compartments including animals and humans. At present, some Spanish beaches and coasts have been affected by discharges of these pollutants, which have caused a serious environmental problem. Therefore, efficient strategies to remove microplastics (MPs) from environmental samples are needed. In this study, the application of three magnetic materials, namely iron oxide (Fe3O4) and the composites Fe3O4@Ag and Fe3O4@Ag@L-Cysteine, to remove MPs, specifically polystyrene (PS), from water samples has been assessed. The magnetic nanoparticles were synthesized and characterized by field effect scanning electron microscopy with energy dispersive X-ray spectroscopy detection (FESEM-EDX). Experimental conditions such as temperature, time, and pH during the removal process were assessed for the different adsorbent materials. The removal rate was calculated by filtering the treated water samples and counting the remaining MPs in the water using ImageJ software. The strongest removal efficiency (100%) was shown using Fe3O4@Ag@L-Cysteine for PS at 50 mg L-1 within 15 min of the separation process at room temperature and a neutral pH. A thermodynamic study demonstrated that the developed MPs elimination strategy was a spontaneous and physisorption process. Coated Fe3O4 magnetic nanoparticles were demonstrated to be an efficient adsorbent for MP removal in aquatic environments and their use a promising technique for the control of MPs contamination.

Porous cationic cellulose beads prepared by homogeneous in-situ quaternization and acid induced regeneration for water/moisture absorption

Chemical modification is a reliable and efficient strategy for designing cellulose-based functional materials. Herein, porous quaternized cellulose beads (QCBs) as cationic superabsorbent were fabricated by homogeneous in-situ chemical grafting cellulose molecular chains with glycidyl trimethylammonium chloride (GTAC) in tetraethylammonium hydroxide (TEAOH)/urea aqueous solution followed by acetic acid induced regeneration. The influence of GTAC dosage on the physicochemical-structural properties of cationic QCBs was deeply investigated. Results revealed that cotton liner could well-dissolved in TEAOH/urea aqueous solution, leading to a homogeneous and efficient quaternization medium for cellulose, thereby giving the high DS and positive charge density for quaternized cellulose. NMR results demonstrated the main substitution of GTAC groups at 2-OH and 6-OH positions of the cellulose chains during quaternization reaction. With increasing GTAC dosage, the network skeleton of QCBs gradually transformed from thick fibrils to thin aggregates, as well as enhanced pore volumes and hydrophilicity. Accordingly, QCBs-1.5 with high pore volume (99.70 cm3/g) exhibited excellent absorption capacity and efficiency, absorbing 122.32 g of water and 0.45 g of moisture per gram of the beads in 20 min. This work not only offers a simple strategy for the homogeneous quaternization modification of cellulose, but also provides a porous cellulose-based cationic superabsorbent material.

Critical review on unveiling the toxic and recalcitrant effects of microplastics in aquatic ecosystems and their degradation by microbes

Production of synthetic plastic obtained from fossil fuels are considered as a constantly growing problem and lack in the management of plastic waste has led to severe microplastic pollution in the aquatic ecosystem. Plastic particles less than 5mm are termed as microplastics (MPs), these are pervasive in water and soil, it can also withstand longer period of time with high durability. It can be broken down into smaller particles and can be adsorbed by various life-forms. Most marine organisms tend to consume plastic debris that can be accumulated easily into the vertebrates, invertebrates and planktonic entities. Often these plastic particles surpass the food chain, resulting in the damage of various organs and inhibiting the uptake of food due to the accumulation of microplastics. In this review, the physical and chemical properties of microplastics, as well as their effects on the environment and toxicity of their chemical constituents are discussed. In addition, the paper also sheds light on the potential of microorganisms such as bacteria, fungi, and algae which play a pivotal role in the process of microplastics degradation. The mechanism of microbial degradation, the factors that affect degradation, and the current advancements in genetic and metabolic engineering of microbes to promote degradation are also summarized. The paper also provides information on the bacterial, algal and fungal degradation mechanism including the possible enzymes involved in microplastic degradation. It also investigates the difficulties, limitations, and potential developments that may occur in the field of microbial microplastic degradation.

Innovative solutions for the removal of emerging microplastics from water by utilizing advanced techniques

Microplastic pollution is one of the most pressing global environmental problems due to its harmful effects on living organisms and ecosystems. To address this issue, researchers have explored several techniques to successfully eliminate microplastics from water sources. Chemical coagulation, electrocoagulation, magnetic extraction, adsorption, photocatalytic degradation, and biodegradation are some of the recognized techniques used for the removal of microplastics from water. In addition, membrane-based techniques encompass processes propelled by pressure or potential, along with sophisticated membrane technologies like the dynamic membrane and the membrane bioreactor. Recently, researchers have been developing advanced membranes composed of metal-organic frameworks, MXene, zeolites, carbon nanomaterials, metals, and metal oxides to remove microplastics. This paper aims to analyze the effectiveness, advantages, and drawbacks of each method to provide insights into their application for reducing microplastic pollution.

Mixtures of Micro and Nanoplastics and Contaminants of Emerging Concern in Environment: What We Know about Their Toxicological Effects

In real environments, pollutants do not occur in isolation. Instead, they can be found in complex mixtures with effects that are completely different from those of the individual components. In this review, articles from 2017 to May 2024 have been selected to provide an overview of the existing knowledge on complex mixtures between micropollutants and micro and nanoplastics in organisms in terrestrial and aquatic environments. It was found that the corresponding toxicological parameters to determine the interaction between the compounds were not calculated in most of the literature reviewed. Our analysis shows that, in aquatic environments, synergistic effects have been found more frequently than antagonistic effects. In terrestrial environments, the joint toxicological action of microplastics or nanoplastics with emerging contaminants has been less studied, but synergistic effects may also predominate. Future work should thoroughly investigate the nature of the interactions in order to properly assess the risk posed by this cocktail of compounds in ecosystems.

Molecular simulation of the slurrying mechanism in microplastic semi-coke water slurry

CONTEXT

This study explores the interaction between particles in microplastic semi-coke water slurry at the molecular level using molecular simulation methods, specifically DFT calculations and MD simulations. In addition, the experiment of slurry preparation was carried out to study the viscosity and stability of the slurry. The electrostatic potential analysis shows that the interaction between microplastics and dispersant molecules occurs on atoms with large electronegativity or oxygen-containing functional groups, and the energy gap of frontier molecular orbitals indicated that PVC interacts most easily with the dispersant (0.39 eV), followed by PS (1.08 eV) and PET (3.65 eV). In addition, it is also noted that due to the steric hindrance effect, the adsorption energy was opposite to the DFT calculation results: PET was - 213.338 kcal/mol (NNO) which was highest, followed by PS (- 107.603 kcal/mol, NNO), and PVC (NNO) was lowest which was - 94.808 kcal/mol. And RDF shows similar results, which the probability of water molecules in the PET system was the highest, followed by PS, and finally, PVC. The MD results are consistent with the viscosity and stability characterization results of the slurry which PET has the lowest viscosity of 87.3 mPa·s. Finally, this study provides new ideas for the treatment of microplastics and the improvement of the performance of semi-coke water slurry and reveals the interaction mechanism between microplastics and semi-coke water slurry.

METHODS

All calculations were performed using Materials Studio (MS) version 2020 software, BIOVIA Corporation. The DFT calculation was carried out through the DMol3 module. The DFT calculations include electron density, electrostatics, orbitals, and population analysis. In DMol3 module, the GGA-PBE function was selected to consider gradient changes in density in the simulated calculation. The DFT-D correction was selected, and all electrons were calculated by DNP for accurate core potentials and the DNP file was 4.4. MD simulation was performed through the Forcite module. MD simulation mainly focuses on relative concentration distribution analysis, radial distribution function, and adsorption energy calculation. All molecular geometry optimizations are performed in the Forcite module. In the molecular dynamic part, all simulations used PCFF forcefield. The NVT ensemble was adopted and using the Nosé thermostat.

Mechanistic study on the increase of Microcystin-LR synthesis and release in Microcystis aeruginosa by amino-modified nano-plastics

Ecological risk of micro/nano-plastics (MPs/NPs) has become an important environmental issue. Microcystin-leucine-arginine (MC-LR) produced by Microcystis aeruginosa (M. aeruginosa) is the most common and toxic secondary metabolites (SM). However, the influencing mechanism of MPs and NPs exposure on MC-LR synthesis and release have still not been clearly evaluated. In this work, under both acute (4d) and long-term exposure (10d), only high-concentration (10 mg/L) exposure of amino-modified polystyrene NPs (PS-NH2-NPs) promoted MC-LR synthesis (32.94 % and 42.42 %) and release (27.35 % and 31.52 %), respectively. Mechanistically, PS-NH2-NPs inhibited algae cell density, interrupted pigment synthesis, weakened photosynthesis efficiency, and induced oxidative stress, with subsequent enhancing the MC-LR synthesis. Additionally, PS-NH2-NPs exposure up-regulated MC-LR synthesis pathway genes (mcyA, mcyB, mcyD, and mcyG) combined with significantly increased metabolomics (Leucine and Arginine), thereby enhancing MC-LR synthesis. PS-NH2-NPs exposure enhanced the MC-LR release from M. aeruginosa via up-regulated MC-LR transport pathway genes (mcyH) and the shrinkage of plasma membrane. Our results provide new insights into the long-time coexistence of NPs with algae in freshwater systems might pose a potential threat to aquatic environments and human health.

Microplastics and Co-pollutants in soil and marine environments: Sorption and desorption dynamics in unveiling invisible danger and key to ecotoxicological risk assessment

Microplastics (MPs) and their co-pollutants pose significant threats to soil and marine environments, necessitating understanding of their colonization processes to combat the plastic pandemic and protect ecosystems. MPs can act as invisible carriers, concentrating and transporting pollutants, leading to a more widespread and potentially toxic impact than the presence of either MPs or the pollutants alone. Analyzing the sorption and desorption dynamics of MPs is crucial for understanding pollutants amplification and predicting the fate and transport of pollutants in soil and marine environments. This review provides an in-depth analysis of the sorption and desorption dynamics of MPs, highlighting the importance of considering these dynamics in ecotoxicological risk assessment of MPs pollution. The review identifies limitations of current frameworks that neglect these interactions and proposes incorporating sorption and desorption data into robust frameworks to improve the ability to predict ecological risks posed by MPs and co-pollutants in soil and marine environments. However, failure to address the interplay between sorption and desorption can result in underestimation of the true impact of MPs and co-pollutants, affecting livelihoods and agro-employments, and exacerbate poverty and community disputes (SDGs 1, 2, 3, 8, 9, and 16). It can also affect food production and security (SDG 2), life below water and life on land (DSGs 14 and 15), cultural practices, and natural heritage (SDG 11.4). Hence, it is necessary to develop new approaches to ecotoxicological risk assessment that consider sorption and desorption processes in the interactions between the components in the framework to address the identified limitations.

Resilient forward osmosis membranes against microplastics fouling enhanced by MWCNTs/UiO-66-NH2 hybrid nanoparticles

The escalating presence of microplastics (MPs) in wastewater necessitates the investigation of effective tertiary treatment process. Forward osmosis (FO) emerges as an effective non-pressurized membrane process, however, for the effective implementation of FO systems, the development of fouling-resistance FO membranes with high-performance is essential. This study focuses on the integration of MWCNT/UiO-66-NH2 as metal-organic frameworks (MOFs) and multi-wall carbon nanotubes (MWCNT) nanocomposites in thin film composite (TFC) FO membranes, harnessing the synergistic power of hybrid nanoparticles in FO membranes. The results showed that the addition of MWCNT/UiO-66-NH2 in the aqueous phase during polyamide formation changed the polyamide surface structure, and enhanced membranes' hydrophilicity by 44%. The water flux of the modified FO membrane incorporated with 0.1 wt% MWCNTs/UiO-66-NH2 increased by 67% and the reverse salt flux decreased by 22% as in comparison with the control membrane. Moreover, the modified membrane showed improved antifouling behavior against both organic foulant and MPs. The MWCNT/UiO-66-NH2 membrane experienced 35% flux decline while the control membrane experienced 65% flux decline. This proves that the integration of MWCNT/UiO-66-NH2 nanoparticles into TFC FO membranes is a viable approach in creating advanced FO membranes with high antifouling propensity with potential to be expanded further to other membrane applications.

Nano-based remediation strategies for micro and nanoplastic pollution

Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.

Microplastics removal in wastewater treatment plants: A review of the different approaches to limit their release in the environment

In last 10 years, the interest about the presence of microplastics (MPs) in the environment has strongly grown. Wastewaters function as a carrier for MPs contamination from source to the aquatic environment, so the knowledge of the fate of this emerging contaminant in wastewater treatment plants (WWTPs) is a priority. This work aims to review the presence of MPs in the influent wastewater (WW) and the effectiveness of the treatments of conventional WWTPs. Moreover, the negative impacts of MPs on the management of the processes have been also discussed. The work also focuses on the possible approaches to tackle MPs contamination enhancing the effectiveness of the WWTPs. Based on literature results, despite WWTPs are not designed for MPs removal from WW, they can effectively remove the MPs (up to 99 % in some references). Nevertheless, they normally act as "hotspots" of MPs contamination considering the remaining concentration of MPs in WWTPs' effluents can be several orders of magnitude higher than receiving waters. Moreover, MPs removed from WW are concentrated in sewage sludge (potentially >65 % of MPs entering the WWTP) posing a concern in case of the potential reuse as a soil improver. This work aims to present a paradigm shift intending WWTPs as key barriers for environmental protection. Approaches for increasing effectiveness against MPs have been discussed in order to define the optimal point(s) of the WWTP in which these technologies should be located. The need of a future legislation about MPs in water and sludge is discussed.

Microplastics have additive effects on cadmium accumulation and toxicity in Rice flower carp (Procypris merus)

Procypris merus, a local fish species found in Guangxi, China is often exposed to both microplastics (MPs) and Cd. However, it remains unclear how these two pollutants affect P. merus. Therefore, we investigated the effects of MPs on Cd accumulation in P. merus. To this end, P. merus was separately exposed to Cd and MPs (500 μg/L) or their combination for 14 days. We found that MPs enhanced Cd accumulation in liver and gills of P. merus. Further, both the single-contaminant (MP and Cd) and combined treatments resulted in lesions in these two tissues, with more severe damage associated with the combined treatment. Even though the effect of MP on the antioxidant defense system of P. merus was limited, the Cd-only and combined treatments considerably affected the antioxidant parameters of P. merus, with the combined treatment showing a stronger effect. GO and KEGG analyses revealed that the differentially expressed genes (DEGs; TNF-related apoptosis-inducing ligand receptor, trail-r) in the Cd-only treatment group were enriched for immune-related GO terms and cell growth and death related pathways, indicating that Cd toxicity affected immune defense in P. merus. The MP-only treatment downregulated DEGs (acyl-CoA synthetase long chain family member 1a, acsl1a) related to lipid metabolism, possibly leading to lipid accumulation in the liver. The combined treatment also upregulated DEGs (aspartate aminotransferase 1, ast 1) associated with immune-related GO terms and amino acid metabolism pathways, suggesting that it affected immune function in P. merus, thereby negatively impacting its health. Results indicated that MPs have additive effects on Cd accumulation and toxicity in rice flower carp. Consequently, MPs ingested by P. merus can promote Cd accumulation, more adverse effects on the health may occur after combined exposure, which can eventually reach humans through the food chain and pose potential risks to human health.

Groundwater systems under siege: The silent invasion of microplastics and cock-tails worldwide

Microplastics (MPs) contamination is one of the significant escalating environmental concerns worldwide, and this stems from the increasing production and unlawful disposal of plastic materials. Regretfully, the synthesis of plastic materials is expected to triple in the upcoming years. Nevertheless, MPs pollution in marine, aquatic, and terrestrial settings has received much attention, unlike in groundwater systems. This study exhaustively reviewed varying degrees of recent publications in various search engines and provided a detailed state of current knowledge and research progress vis-à-vis MPs and cock-tail pollution in groundwater systems. Evidently, groundwater sources are severely contaminated as a result of growing anthropogenic activities and vertical movement of MPs and cock-tails from the atmospheric, terrestrial, and aquatic environments, however, fewer researchers have fixated their attention on estimating the occurrence of MPs in groundwater resources, while sufficient information regarding their sources, sampling methods, abundance, transport pathways, fate, modeling techniques, appropriate and adequate data, sorption properties, separation from other environmental media, toxicity, and remedial measures are extensively lacking. In addition, MPs may combine with other toxic emerging contaminants to improve migration and toxicity; however, no research has been conducted to fully understand cock-tail migration mechanisms and impacts in groundwater systems. Over time, groundwater may be regarded as the primary sink for MPs, if effective actions are neglected. Overall, this study detected a lack of concern and innumerable voids in this field; hence, vital and nascent research gaps were identified for immediate, advanced, and interdisciplinary research investigations.

Recent advances of application of bentonite-based composites in the environmental remediation

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Fragmented marine plastics as the prevalent litter type on a small island beach in the Adriatic

The issue of plastic pollution has dramatically intensified in the recent years. Our study investigates extensive plastic contamination of a sandy beach on a small Adriatic island. The beach was sampled on three occasions, in 2013, 2020 and 2022, using 1 m2 quadrats placed along the lower and upper strandlines, resulting in average litter concentrations of 385 ± 106, 1095 ± 522 and 129 ± 37 item m-2, respectively. The lower size limit of collected litter was 1 mm, thus including large microplastics. Plastic fragments (49-74 %) and plastic pellets (15 %-37 %) were predominant litter categories. The proportion of fragments is significantly higher during the tourist season with a more intensive cleaning regime (April-October), as opposed to the off-season (November-March). Fisheries and aquaculture litter was identified as a relevant source of pollution. More research is needed in the future into the microplastics smaller than 1 mm.

Synthesis of recyclable and light-weight graphene oxide/chitosan/genipin sponges for the adsorption of diclofenac, triclosan, and microplastics

Emerging micropollutants, such as pharmaceuticals and microplastics (MPs), have become a pressing water environmental concern. The aim of this study is to synthesize chitosan sponges using graphene oxide (GO) and genipin (GP) for the removal of pharmaceuticals (diclofenac (DCF) and triclosan (TCS)) and MPs, verify their adsorption mechanisms, evaluate the effects of temperature, pH, and salinity on their adsorption capacities, and determine their reusability. The GO5/CS/GP sponge exhibited a macroporous nature (porosity = 95%, density = 32.6 mg/cm3). GO and cross-linker GP enhanced the adsorption of DCF, TCS, and polystyrene (PS) MPs onto the CS sponges. The adsorption of DCF, TCS, and PS MPs involved multiple steps: surface diffusion and pore diffusion of the sponge. The adsorption isotherms demonstrated that Langmuir model was the most fitted well model to explain adsorption of TCS (qm = 7.08 mg/g) and PS MPs (qm = 7.42 mg/g) on GO5/CS/GP sponge, while Freundlich model suited for DCF adsorption (qm = 48.58 mg/g). DCF adsorption was thermodynamically spontaneous and endothermic; however, the adsorption of TCS and PS MPs was exothermic (283-313 K). The optimal pH was 5.5-7 due to the surface charge of the GO5/CS/GP sponge (pHzpc = 5.76) and ionization of DCF, TCS, and PS MPs. As the salinity increased, DCF removal efficiency drastically decreased due to the weakening of electrostatic interactions; however, TCS removal efficiency remained stable because TCS adsorption was mainly caused by hydrophobic and π-π interactions rather than electrostatic interaction. The removal of PS MPs was enhanced by the electrostatic screening effects of high Na+ ions. PS nanoplastics (average size = 26 nm) were removed by the GO5/CS/GP sponge at a rate of 73.0%, which was better than that of PS MPs (41.5%). In addition, the GO5/CS/GP sponge could be recycled over five adsorption-desorption cycles.

An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook

Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.

Corals-inspired magnetic absorbents for fast and efficient removal of microplastics in various water sources

Microplastics (MPs) as the formidable pollutants with high toxicity and difficult degradation may threaten the aquaculture industry and human health, making it highly necessary to develop the effective removal methods. In this article, Fe3O4 nanoparticles (NPs) were initially fabricated with mesoporous structure, but showing undesirable adsorption efficiencies for the adsorption of MPs (lower than 70%). Inspired by the reefs-rebuilding corals acting as the sinks for various marine pollutants like plastic, Fe3O4 NPs were coated further with adhesive polymerized dopamine (PDA) yielding Fe3O4@PDA absorbents. Unexpectedly, it was discovered that the corals-mimicking absorbents so formed could allow for the removal of MPs with dramatically enhanced efficiencies up to 98.5%, which is over about 30% higher than those of bare Fe3O4 NPs. Herein, the PDA shells might conduct the increased adhesion to MPs, presumably through the formation of hydrogen bonding, π-π stacking, and hydrophobic interactions. A fast (within 20 min) and stable adsorption of MPs can also be expected, in addition to the PDA-improved environmental storage of Fe3O4 NPs. Subsequently, the Fe3O4@PDA adsorbents were utilized to remove MPs from different water sources with high efficiencies, including pure water, suburban streams, village rivers, lake water, inner-city moats, and aquaculture water. Such a magnet-recyclable adsorbent may provide a new way for rapid, effective, and low-cost removal of MPs pollutants from various water systems.

Quantitative distribution and quantized ecological threat of microplastics in farmland: Shanghai as an example

The occurrence of microplastics (MPs) in farmlands poses a threat to soil health and crop yield. There needs to be more research on the role of cropping patterns in the accumulation of MPs and quantizing the threat of MPs on soil health and crop yield. In this study, a field study was carried out to explore the role of cropping patterns in the accumulation of MPs in agricultural soil in Shanghai, China. Furthermore, the specific effect and importance of MPs and each soil physicochemical indicator to soil health and crop yield were clarified, and the threat of MPs in reducing soil health and crop yield was quantized. Relative lower MPs abundance was detected in Shanghai. MPs abundance in vegetable fields was significantly higher than that in orchards. The broad source of MPs, the acceleration of plastics breaking under artificial disturbance and warmer temperatures, and the block of MPs exchange could account for the quicker accumulation of MPs in vegetable fields. MPs have a negligible effect on microbial diversity and metabolic activity which plays a role in soil enzyme activity. Besides, MPs served as one of the critical factors for rice yield reduction.

Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF). The PBF generated from this bacterium shows promising efficacy in effectively flocculating NMPs. Subsequently, the precipitated flocs (NMPs + PBF) were utilized as sustainable feedstock for synthesizing PBF. The study yielded 6.91 g/L PBF under optimum conditions. Genome sequencing analysis was conducted to study the mechanisms of PBF synthesis and nylon-6,6 degradation. The PBF exhibited impressive flocculating capacity of 90.1 mg/g of PBF when applied to 0.01 mm NMPs, aided by the presence of Ca2+. FTIR and XPS analysis showed the presence of hydroxyl, carboxyl, and amine groups in PBF. The flocculation performance of PBF conformed to Langmuir isotherm and pseudo-first-order adsorption kinetics model. These findings present a promising approach for reducing the production costs of PBF by utilizing NMPs as sustainable nutrient sources.

Microplastic pollutants in water: A comprehensive review on their remediation by adsorption using various adsorbents

Microplastics (MPs), as emerging pollutants, have attracted the attention of environmentalists, statespersons, and the scientific community over the last few decades. To address the spread of MPs in the environment, it is imperative to develop various removal techniques and materials that are effective, scalable, and ecologically benign. However, to the best of our knowledge, no review has systematically examined the removal of MPs using adsorption or provided an in-depth discussion on various adsorbents. Adsorption is an inexpensive and effective technology for wastewater treatment. Recently, many researchers have conducted studies on MP remediation using diverse adsorbent materials, such as biochar, activated carbon, sponges, carbon nanotubes, metal-layered oxides, metal-organic frameworks (MOFs), and zeolites. Each adsorbent has advantages and disadvantages. To overcome their disadvantages, researchers have been designing and developing hybrid adsorbents for MP remediation. This review provides insights into these individual adsorbents and also discusses hybrid adsorbents for MP removal. Finally, the review elaborates on future possibilities and ways to enable more efficient, scalable, and environmentally friendly MP cleanup. Overall, this review bridges the gap between contemporary MP remediation using adsorption techniques and adsorbent development.

Global occurrence characteristics, drivers, and environmental risk assessment of microplastics in lakes: A meta-analysis

Microplastic (MP) pollution in lakes has received much attention as an increasing amount of plastic waste enters aquatic ecosystems. However, there is still a lack of comprehensive understanding of the global distribution patterns, environmental hazards, factors driving their presence, and the relationships between sources and sinks of MPs. In this study, we conducted a meta-analysis of drivers of lake MP pollution based on 42 articles on MP pollution from three different aspects: geographical distribution, driving factors and environmental risks. The results revealed differences in the MP pollution levels across the different sampling sites in the global lakes. Moreover, there is significant heterogeneity in the abundance of MPs among various lakes, whose distribution pattern is affected by geographical location, sampling method and extraction method. The size of the MPs differed significantly between water and sediment, and the proportion of small (<1 mm) MPs in sediment was significantly greater than that in water (72% > 46%). Environmental risk assessment reveals that the risk level of MP pollution in most lakes worldwide is low, and the environmental risk of pollution in lake water is higher than that in sediment. Based on the risk assessment and geographical location of the lake, the risk of MP pollution is related not only to human activities and economic development but also to local waste management practices, which directly impact the accumulation of MPs. Therefore, we suggest that the production of biodegradable low-risk polymer plastics instead of high-risk materials, and plastic solid waste recycling management should be strengthened to effectively mitigate the presence of MPs in the environment.

Psychrobacter species enrichment as potential microplastic degrader and the putative biodegradation mechanism in Shenzhen Bay sediment, China

Microplastic (MP) pollution has emerged as a pressing environmental concern due to its ubiquity and longevity. Biodegradation of MPs has garnered significant attention in combatting global MP contamination. This study focused on MPs within sediments near the sewage outlet of Shenzhen Bay. The objective was to elucidate the microbial communities in sediments with varying MPs, particularly those with high MP loads, and to identify microorganisms associated with MP degradation. The results revealed varying MP abundance, ranging from 211 to 4140 items kg-1 dry weight (d. w.), with the highest concentration observed near the outfall. Metagenomic analysis confirmed the enrichment of Psychrobacter species in sediments with high MP content. Psychrobacter accounted for ∼16.71% of the total bacterial community and 41.71% of hydrocarbon degrading bacteria at the S3 site, exhibiting a higher abundance than at other sampling sites. Psychrobacter contributed significantly to bacterial function at S3, as evidenced by the Kyoto Encyclopedia of Genes and Genomes pathway and enzyme analysis. Notably, 28 enzymes involved in MP biodegradation were identified, predominantly comprising oxidoreductases, hydrolases, transferases, ligases, lyases, and isomerases. We propose a putative mechanism for MP biodegradation, involving the breakdown of long-chain plastic polymers and subsequent oxidation of short-chain oligomers, ultimately leading to thorough mineralization.

Shape Matters: Long-Range Transport of Microplastic Fibers in the Atmosphere

The deposition of airborne microplastic particles, including those exceeding 1000 μm in the longest dimension, has been observed in the most remote places on earth. However, their deposition patterns are difficult to reproduce using current atmospheric transport models. These models usually treat particles as perfect spheres, whereas the real shapes of microplastic particles are often far from spherical. Such particles experience lower settling velocities compared to volume equivalent spheres, leading to longer atmospheric transport. Here, we present novel laboratory experiments on the gravitational settling of microplastic fibers in air and find that their settling velocities are reduced by up to 76% compared to those of the spheres of the same volume. An atmospheric transport model constrained with the experimental data shows that shape-corrected settling velocities significantly increase the horizontal and vertical transport of particles. Our model results show that microplastic fibers of about 1 mm length emitted in populated areas are more likely to reach extremely remote regions of the globe, including the high Arctic, which is not the case for spheres of equivalent volume. We also calculate that fibers with lengths of up to 100 μm settle slowly enough to be lifted high into the stratosphere, where degradation by ultraviolet radiation may release chlorine and bromine, thus potentially damaging the stratospheric ozone layer. These findings suggest that the growing environmental burden and still increasing emissions of plastic pose multiple threats to life on earth.

Microplastic pollution in terrestrial ecosystems: Global implications and sustainable solutions

Microplastic (MPs) pollution has become a global environmental concern with significant impacts on ecosystems and human health. Although MPs have been widely detected in aquatic environments, their presence in terrestrial ecosystems remains largely unexplored. This review examines the multifaceted issues of MPs pollution in terrestrial ecosystem, covering various aspects from additives in plastics to global legislation and sustainable solutions. The study explores the widespread distribution of MPs worldwide and their potential antagonistic interactions with co-occurring contaminants, emphasizing the need for a holistic understanding of their environmental implications. The influence of MPs on soil and plants is discussed, shedding light on the potential consequences for terrestrial ecosystems and agricultural productivity. The aging mechanisms of MPs, including photo and thermal aging, are elucidated, along with the factors influencing their aging process. Furthermore, the review provides an overview of global legislation addressing plastic waste, including bans on specific plastic items and levies on single-use plastics. Sustainable solutions for MPs pollution are proposed, encompassing upstream approaches such as bioplastics, improved waste management practices, and wastewater treatment technologies, as well as downstream methods like physical and biological removal of MPs. The importance of international collaboration, comprehensive legislation, and global agreements is underscored as crucial in tackling this pervasive environmental challenge. This review may serve as a valuable resource for researchers, policymakers, and stakeholders, providing a comprehensive assessment of the environmental impact and potential risks associated with MPs.

Application of carbon-based adsorbents in the remediation of micro- and nanoplastics

Micro-nano plastics (MNPs) are emerging contaminants that can easily enter the food chain, posing risks to both the aquatic ecosystem and human health. Various physical, biological, and chemical methods have been explored to remove MNPs from water, and recently, adsorption technology has gained attention as an effective approach. Among the potential candidates, carbon-based adsorbent has emerged as a promising choice due to their low cost, eco-friendly nature, and sustainability. This paper summarizes recent advancements in MNP removal using carbon-based adsorbents, with a focus on the modification methods and adsorption mechanisms. Additionally, the factors influencing the adsorption performance and the methods for characterizing the adsorption mechanism are analyzed. Finally, the advantages and disadvantages of carbon-based adsorbents over other adsorbents are discussed, along with the current state of sustainable recycling and future research prospects.

Amplifiers of environmental risk of microplastics in sewage sludge: Thermal drying treatment

Sewage sludge was already identified as an important source of microplastics (MPs) in the environment. Therefore, investigating the effects of sludge treatment processes on sludge-based MPs is essential for understanding the environmental risks and controlling their release. This study investigated the occurrence characteristics and elucidated the fragmentation mechanism of sludge-based MPs before and after the thermal drying treatment of sludge. The results showed that this treatment increased the abundance of sludge-based MPs by about 10-fold, with enhanced fragmentation and fracture parameters, and increased the abundance of <100 μm MPs to >60 %. Remarkably, both polypropylene-microplastics (PP-MPs) and polyethylene terephthalate-microplastics (PET-MPs) did not show significant chemical aging. The structural analysis showed that the molecular chain disorientation and secondary crystallization of PP-MPs and PET-MPs occurred. These transformations caused the contraction of the polymer molecular chains and the generation of micro-mechanical stresses, leading to the formation of warpage structures and stress cracking on the MPs' surface. These phenomena also contributed to the further fragmentation of the MPs and the development of finer MPs particles. The findings of the present investigations emphasize that the thermal drying of sewage sludge amplifies the environmental risk of sludge-based MPs.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

A critical review on remediation of microplastics using microalgae from aqueous system

Microplastics (MPs) are deemed to be a global concern due to their harmful negative effects on the aquatic environment and human beings. MPs have a significant impact on both fresh and marine water ecosystems. In many countries, there is concern about the deleterious consequences of MPs on human health due to the presence of MPs in aquatic life for higher intake of marine food (fish and shellfish). Exposure to MPs causes fish to suffer from growth retardation, neurotoxicity, and behavioural abnormalities and it affects human as well. It causes oxidative stress, neurotoxicity, cytotoxicity, and immune system disruption after being ingested to these contaminated fish in human body. Due to these reasons, it has become imperative to find ways to resolve this problem. This review paper represents a pioneering endeavor by consolidating comprehensive information on microplastic-polluted Indian riverine ecosystems and effective MPs removal methods into a single, cohesive document. It meticulously evaluates the principles, removal efficiency, benefits, and drawbacks of various techniques, aiming to identify the most optimal solution. Furthermore, this paper provides a comprehensive exploration of the interesting interactions between MPs and microalgae, delving into the intricate processes of hetero-aggregation. Additionally, it shines a spotlight on the latest advancements in understanding the efficacy of microalgae in removing MPs, showcasing recent breakthroughs in this field of research. Moreover, the work goes beyond conventional assessments by elucidating the characteristics of MPs and exploring diverse influencing parameters that impact MPs removal by microalgae and also addresses the potential future aspects. This thorough investigation uncovers important factors that could significantly contribute to the development of more efficient and sustainable remediation strategies.

Comprehensive Understanding of Self-Propelled Janus Pt/Fe2O3 Micromotor Dynamics: Impact of Size, Morphology, and Surface Structure

The increasing use of plastics has led to the accumulation of plastic waste in the oceans, resulting in significant global environmental challenges associated with microplastic pollution. Micromotors, capable of capturing and removing microplastics from aquatic systems, have emerged as a promising solution to addressing this problem. This research aims to analyze the factors affecting the speed of micromotors, including size, morphology, and surface structure, while elucidating the underlying mechanisms governing micromotor propulsion to develop efficient and ecofriendly micromotors. In this study, we systematically manipulate various parameters by modifying the synthesis method of hematite-based micromotors, subsequently comparing their propulsion speeds and uncovering the precise role of these parameters in determining the micromotor performance. Furthermore, we shed light on the intricate interplay between drag force and propulsive force, demonstrating how these forces vary under different H2O2 conditions. These findings provide valuable insights into the design of efficient micromotors tailored for dynamic aquatic environments.

Occurrence and sources of microplastics on Arctic beaches: Svalbard

Plastic pollution is recognised as a major global environmental concern, especially within marine environments. The small size of microplastics (< 5 mm) make them readily available for ingestion by organisms in all trophic levels. Here, four beach sites in Adventfjorden on the west coast of Svalbard, were sampled with the aim of investigating the occurrence and abundance of microplastics on beaches to assess potential sources of microplastic pollution. High variability in microplastic amount, type and polymers were found at all sites ranging from means of 0.7 n/g (number) at the remotest site and 2.2 n/g (number) at the site closest to Longyearbyen. Statistical analyses suggested that patterns observed were linked to direct proximity to human activities through land uses and effluent discharge. These findings point to an increased importance of localised factors on driving elevated microplastic pollution in beach sediments over oceanic controls in remote but inhabited Arctic locations and have important implications for our understanding and future assessments of microplastic pollution in such settings.

Control strategies for microplastic pollution in groundwater

Groundwater is the primary source of water that occurs below the earth's surface. However, the advancement in technology and the increasing population, which lead to the discharge of contaminants such as microplastics (MPs), have an adverse impact on the quality of groundwater. MPs are ubiquitous pollutants that are widely found throughout the world. The maximum abundance of MPs is 4 items/L and 15.2 items/L in groundwater at the specific location of China and USA. Various factors can affect the migration of MPs from soil to groundwater. The occurrence of MPs in water causes serious health issues. Therefore, taking appropriate strategies to control MP contamination in groundwater is urgent and important. This review summarizes the current literature on the migration process of MPs from soil to groundwater along with possible methods for the remediation of MP-polluted groundwater. The main objective of the review is to summarize the technical parameters, process, mechanism, and characteristics of various remediation methods and to analyze strategies for controlling MP pollution in groundwater, providing a reference for future research. Possible control strategies for MP pollution in groundwater include two aspects: i) prevention of MPs from entering groundwater; ii) remediation of polluted groundwater with MPs (ectopic remediation and in-situ remediation). Formulating legislative measures, strengthening public awareness and producing more environment-friendly alternatives can be helpful to reduce the production of MPs from the source. Manage plastic waste reasonably is also a good strategy and the most important part of the management is recycling. The shortcomings of the current study and the direction of future research are also highlighted in the review.

The forgotten impacts of plastic contamination on terrestrial micro- and mesofauna: A call for research

Microplastics (MP) and nanoplastics (NP) contamination of the terrestrial environment is a growing concern worldwide and is thought to impact soil biota, particularly the micro and mesofauna community, by various processes that may contribute to global change in terrestrial systems. Soils act as a long-term sink for MP, accumulating these contaminants and increasing their adverse impacts on soil ecosystems. Consequently, the whole terrestrial ecosystem is impacted by microplastic pollution, which also threatens human health by their potential transfer to the soil food web. In general, the ingestion of MP in different concentrations by soil micro and mesofauna can adversely affect their development and reproduction, impacting terrestrial ecosystems. MP in soil moves horizontally and vertically because of the movement of soil organisms and the disturbance caused by plants. However, the effects of MP on terrestrial micro-and mesofauna are largely overlooked. Here, we give the most recent information on the forgotten impacts of MP contamination of soil on microfauna and mesofauna communities (protists, tardigrades, soil rotifers, nematodes, collembola and mites). More than 50 studies focused on the impact of MP on these organisms between 1990 and 2022 have been reviewed. In general, plastic pollution does not directly affect the survival of organisms, except under co-contaminated plastics that can increase adverse effects (e.g. tire-tread particles on springtails). Besides, they can have adverse effects at oxidative stress and reduced reproduction (protists, nematodes, potworms, springtails or mites). It was observed that micro and mesofauna could act as passive plastic transporters, as shown for springtails or mites. Finally, this review discusses how soil micro- and mesofauna play a key role in facilitating the (bio-)degradation and movement of MP and NP through soil systems and, therefore, the potential transfer to soil depths. More research should be focused on plastic mixtures, community level and long-term experiments.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Microcystins-Loaded Aged Nanoplastics Provoke a Metabolic Shift in Human Liver Cells

Studies concerning the toxicity of pollutant-loaded nanoplastics (NPs) toward humans are still in their infancy. Here, we evaluated the adsorption of microcystins (MCs) by pristine and aged polystyrene nanoplastics (PSNPs), prepared MCs-loaded aged PSNPS (1, 5, 10, 15, and 19 μg/mg), and systematically mapped the key molecular changes induced by aged and MCs-loaded PSNPs to human hepatoblastoma (HepG2) cells. According to the results, MC-LR adsorption is increased 2.64-fold by aging, and PSNP accumulation is detected in HepG2 cells. The cytotoxicity of the MC-LR-loaded aged PSNPs showed a positive relationship with the MC-LR amount, as the cell viability in the 19 μg/mg loading treatment (aPS-MC19) was 10.84% lower than aged PSNPs; meanwhile, more severe oxidative damage was observed. Primary approaches involved stressing the endoplasmic reticulum and reducing protein synthesis that the aged PSNPs posed for HepG2 cells, while the aggravated cytotoxicity in aPS-MC19 treatment was a combined result of the metabolic energy disorder, oxidative damage, endoplasmic reticulum stress, and downregulation of the MC-LR target protein. Our results confirm that the aged PSNPs could bring more MC-LR into the HepG2 cells, significantly interfere with biological processes, and provide new insight into deciphering the risk of NPs to humans.