Microplastics from face masks: A potential hazard post Covid-19 pandemic

Novel hemin-derived Fe/N-C magnetic catalyst for enhanced peroxymonosulfate activation and diclofenac degradation

In this study, Fe involved N-doped carbon catalysts labelled as PA@Hemx (x = pyrolysis temperature) was synthesized through a one-step pyrolysis of hemin (Hem) and polyacrylate (PA). The reported method enables high dispersion and exposure of both Fe and N active sites on PA derived carbon. The PA@Hemx samples were then used for peroxymonosulfate (PMS) activated diclofenac (DCF) degradation. Results from the characterization studies verified the successful incorporation of hemin in the composite. Approximately 99.2 % DCF degradation at pH = 6.01 was achieved in 60 min using 0.1 g L-1 PA@Hem700 and 1.0 mM PMS. The pseudo-second-order kinetic model and Langmuir model were used to described the uptake and equilibrium process in DCF/PA@Hem700 system. Scavenging and electron-spin-resonance studies showed a non-radical singlet oxygen species (1O2) dominates over •OH and SO4•- radicals in the system. The role of electron transfer was also verified via chronoamperometry and electrochemical-impedance spectroscopy techniques. Furthermore, the PA@Hem700/PMS remained highly active towards DCF degradation even in the presence of common anions, humic acid, and various water matrices. The developed catalyst exhibited a TOC removal of 65.8 %. The study also established the potential of PA@Hem700/PMS to degrade other organic pollutants (e.g., tetracycline (TC), simazine (SIM), and sulfamethoxazole (SMX)). The results from this study are expected to advance research on synthesizing other novel polymer-based Fe/N-C catalysts for degrading organic pollutants.

Extraction and characterization of microplastics in biomined good earth fractions: assessment of urban and suburban landfill sites, India

The sustainability of biomined landfill sites mainly depends on the profitable valorisation of landfill mined wastes based on the physical and chemical properties of the materials. This study focuses on the extraction, concentration, and characterization of microplastics (MPs) as an emergent pollutant in biomined good earth fractions derived from five landfill sites in West Bengal, India: Baruipur, Dhapa, Madhyamgram, Chandannagar, and Howrah. The concentration of MPs in these samples ranged from 11,500 ± 707.1 to 34,500 ± 7778.2 particles/kg having average sizes 1000-2000 µm. Morphological analysis revealed that fragments, films, and fibers are the common MP types across all samples, with sky, black, and red being the predominant colours. µFTIR analysis identified HDPE and LDPE as the primary polymers in the good earth materials derived from all landfill sites, followed by PP, Cellophane, PVC, PS, EPM, EPS, and PET. Pollution Load Index (PLI), Polymer Hazard Index (PHI) and Potential Ecological Risk Index (PERI) were used to assess the risk of good earth materials. PLI values indicated relatively low pollution load, while elevated PHI values exceeding 1000 were noted in Howrah, Dhapa, and Chandannagar due to the presence of PVC. The study suggests the need for standardized methods to extract and quantify MPs in good earth products from landfill sites and the development of protocols or guidelines for the application of good earth in sustainable development projects.

Microplastics in wastewater and the role of local wastewater treatment stations in controlling microplastic pollution: a case study from Vietnam

Wastewater has been identified as one of the main contributors to microplastic (MP) pollution in aquatic environments. Hence, this study investigates the presence, characteristics of MPs in wastewater sample types (industrial, domestic, and medical wastewater), and also the removal efficacy of MPs by local wastewater treatment stations. Overall, industrial wastewater showed a higher MP abundance level at 60,881 ± 48,154 items/m3, compared to domestic and medical wastewater with values of 31,494 ± 10,142 items/m3 and 35,453 ± 13,186 items/m3, respectively. Fiber and fragment were the main shapes observed among the MPs found in all wastewater samples, and the dominant form was microfiber, ranging from 63 to 97.5% of total MPs. The performance of local wastewater treatment stations showed varied efficiencies in MP removal, ranging between 15.8 ± 5 and 90.2 ± 1.3%. Domestic wastewater treatment stations showed lower MP removal effectiveness, at 43.9 ± 13.1%, while treatment stations receiving industrial and medical wastewater achieved 59.5 ± 20.7 and 69.6 ± 22.1% of removal efficiencies, respectively. As estimated, 2.9 × 1010 microplastic items could be emitted to the water bodies around Hanoi every day, which MPs originated from domestic wastewater accounted for 80.3% due to its high discharge volume and inadequate treatment capacity. Optimization of the septic tank system operation and the sewage sludge treatment processes could prevent secondary contamination of MPs, while an additional primary sedimentation step could improve the overall MP elimination efficacy of the studied treatment stations. The results from this study suggested that more in-depth investigations were required for a proper understanding of the migration routes of MPs from different anthropogenic activities to wastewater.

Fabrication of microplastic-free biomass-based masks: Enhanced multi-functionality with all-natural fibers

With the coronavirus-2019 epidemic, disposable surgical masks have become a common personal protective necessity. However, off-the-shelf masks have low filtration efficiency and short service life and can only physically isolate pathogens, easily leading to secondary infection and cross-infection between users. Additionally, they produce debris and microplastics, which can be inhaled by the human body and cause serious diseases. To address this, this study introduced a brand-new, microplastic-free, long-life, biodegradable, self-disinfecting, and gas-sensitive mask made of basal dialdehyde-chitosan crosslinked animal-collagen/plant composite fibers (CP-Mask) with an asymmetric bilayer structure using scalable paper-processing technology. The CP-Mask demonstrated outstanding filtration performance (95.9 %) for particulate matter with various sizes and constantly maintained filtration efficiency even after 20 friction cycles. The CP-Mask also exhibited stable and lasting antibacterial properties, with significant inhibition rates of 99.21 % for Staphylococcus aureus and 98.86 % for Escherichia coli and could effectively filter bacterial aerosols. In addition, CP-Mask realized the real-time detection of respiratory ammonia concentration and timely identified the ammonia level. The average response value was 68.26 %, and the average response time was 159.3 s, presenting good circulatory stability and is suitable for early diagnosis of ammonia-related diseases. Breakthrough, the origin of natural ingredients, fundamentally makes CP-Mask less likely to emit microplastics than commercially available masks and endows it with complete biodegradability in soil within three months, eliminating the risk of microplastic inhalation from the source. The proposed CP-Mask provides a new idea to facilitate personal health monitoring and portability of medical protection equipment regarding biocompatibility, biodegradability, self-disinfection, and ammonia sensing ability.

Microplastic pollution in the marine environment: Distribution factors and mitigation strategies in different oceans

As the COVID-19 pandemic began in 2020, plastic usage spiked, and microplastic (MP) generation has increased dramatically. It is documented that MP can transfer from the source to the ocean environment where they accumulate as the destination. Therefore, it is essential to understand their transferring pathways and effective environmental factors to determine the distribution of MPs in the marine environment. This article reviews the environmental factors that affect MP distribution in the oceans including abiotic such as ocean currents and wind direction, physical/chemical and biological reactions of MPs, natural sinking, particle size and settling velocity, and biotic including biofouling, and incorporation in fecal material. It was found that velocity and physical shearing are the most important parameters for MP accumulation in the deep ocean. Besides, this review proposes different research-based, national-level, and global-level strategies for the mitigation of MPs after the pandemic. Based on the findings, the level of MP pollution in the oceans is directly correlated to coastal areas with high populations, particularly in African and Asian countries. Future studies should focus on establishing predictive models based on the movement and distribution of MPs to mitigate the levels of pollution.

Microplastics in aquaculture environments: Current occurrence, adverse effects, ecological risk, and nature-based mitigation solutions

Microplastics pose detrimental effects on the environment, aquatic products, and human health. This comprehensive analysis highlights the repercussions of microplastic contamination within aquaculture. Microplastics in aquaculture are primarily from land-based plastic waste, tourism-related disposal, shipping activities, fisheries/aquaculture, and atmospheric deposition. In aquaculture environments, microplastics have the potential to discharge harmful additives, attract pollutants, degrade the aquaculture setting, and induce toxicological effects. These particles pose ecological risks and can impact human health. Assessing the destiny of microplastics in aquaculture ecosystems is crucial to determining the role of aquaculture in contributing to microplastic contamination within the watershed. It particularly emphasizes the ecological consequences for aquaculture species and the subsequent health threats for humans. The review strongly supports strict regulations to control and limit microplastic presence within aquaculture ecosystems. Clear regulations are essential for reducing microplastics in aquaculture, thereby ensuring food safety. A novel nature-based solution is proposed using methods like microplastic biofilters, biodegradation, and wetlands. These innovations can be conducted in aquatic ecosystems to serve as microplastic biofilters, effectively eliminating waterborne microplastics. In the future, however, it is crucial to develop additional emergency treatment measures to avoid the potential negative impacts of microplastics on both aquaculture and human health.

Spatiotemporal variations and the ecological risks of microplastics in the watersheds of China: Implying the impacts of the COVID-19 pandemic

China is not only the first reported place of the COVID-19 pandemic but also is the biggest microplastic emitter in the world. Nevertheless, the impact of the COVID-19 pandemic on microplastic pollution in the watersheds of China remains poorly understood. To address this, the present study conducted a data mining and multivariate statistical analysis based on 8898 microplastic samples from 23 Chinese watershed systems before and during the COVID-19 pandemic. The results showed that the COVID-19 pandemic extensively affected the abundance, colors, shapes, polymer types, and particle sizes of microplastic in Chinese watershed systems. Before and during the COVID-19 pandemic, 77.27 % of the Chinese watershed systems observed increased microplastic abundance. Moreover, the COVID-19 pandemic itself, natural conditions (such as altitude and weather), and anthropogenic factors (such as civil aviation throughput) are highly intertwined, jointly impacting the microplastic in the watersheds of China. From the perspective of ecological risks, the COVID-19 pandemic was more likely to aggravate the microplastic pollution in the middle and down reaches of the Yangtze River Watersheds. Overall, whether before or during the COVID-19 pandemic, the main watershed systems of China still stayed at a high pollution level, which rang the alarm bell that watershed systems of China had been at serious ecological risk accused of microplastic contamination.

Sources, interactions, influencing factors and ecological risks of microplastics and antibiotic resistance genes in soil: A review

Microplastics (MPs) and antibiotic resistance genes (ARGs) are gaining increasing attention as they pose a threat to the ecological environment and human health as emerging contaminants. MPs has been proved to be a hot spot in ARGs, and although it has been extensively studied in water environment, the results of bibliometrics statistical analysis in this paper showed that relevant studies in soil ecological environment are currently in the initial stage. In view of this, the paper provides a systematic review of the sources, interactions, influencing factors, and ecological risks associated with MPs and ARGs in soil environments. Additionally, the mechanism and influencing factors of plastisphere formation and resistance are elaborated in detail. The MPs properties, soil physicochemical properties, soil environmental factors and agricultural activities are the primarily factors affecting the interaction between MPs and ARGs in soil. Challenges and development directions of related research in the future are also prospected. It is hoped that the review could assist in a deeper comprehension and exploration of the interaction mechanism between MPs and ARGs in soil as well as the function of MPs in the transmission process of ARGs among diverse environmental media and organisms, and provide theory basis and reference for the MPs and ARGs pollution control and remediation in soil.

Engineering the Hot-Spots in Au-Ag Alloy Nanoparticles through Meniscus-Confined 3D Printing for Microplastic Detection

The escalating concern surrounding microplastic (MP) pollution necessitates urgent attention and the development of rapid techniques for quantifying extremely low concentrations. Surface-enhanced Raman spectroscopy (SERS) has emerged as a promising method due to its simplicity, high sensitivity, and rapid quantification capabilities. Herein, the efficacy of gold-silver alloy nanoparticles (3DPAu-Ag) substrates for detecting poly(methyl methacrylate) (PMMA) and polystyrene (PS) MPs is investigated. The 3DPAu-Ag SERS substrates are fabricated using the meniscus-confined electrochemical 3D printing (MC-E3DP) process, employing a nozzle of 0.8 mm size with 2.5 V potential at a printing speed of 0.4 mm s-1. The proposed SERS substrates exhibit exceptional sensitivity and are capable of detecting PMMA concentrations as low as 0.2 μg mL-1 and PS concentrations of 1.2 μg mL-1 within the ranges of 1-103 μg mL-1 and 10-104 μg mL-1, respectively. Remarkable enhancement factors (EFs) of up to 3.2 × 104 for PMMA and 9.3 × 103 for PS are achieved, underscoring the substrates' effectiveness. Furthermore, the investigation demonstrates outstanding uniformity and reproducibility of the 3DPAu-Ag substrates, with relative standard deviation (RSD) values of only 4.1 and 6.4%, respectively, across 31 and 5 measurements. Additionally, a minimal 17% decrease in the initial SERS signal value after 5 weeks highlights the substrates' high stability. This not only highlights the superior quality of the substrates but also positions them ahead of previously reported works in the literature. Moreover, this study also comes up with a plausible mechanism for MPs SERS detection facilitated by the 3DPAu-Ag substrates, offering insights into the underlying processes. Overall, 3DPAu-Ag substrates show promise for sensitive, stable MP detection, which is crucial for environmental monitoring.

First Data on Anthropogenic Microparticles in the Gastrointestinal Tract of Juvenile Scalloped Hammerhead Sharks (Sphyrna lewini) in the Gulf of California

Scalloped hammerhead sharks (Sphyrna lewini) are critically endangered, according to the International Union for Conservation of Nature Red List, likely due to anthropogenic activities such as intense fishing and pollution. Nowadays, plastic debris contamination is a subject of concern due to its extensive presence in the sea and the digestive tracts of many fish species. The possible effects of plastic debris as a vector of other pollutants are still unknown. We analyzed the digestive tract of 58 hammerhead sharks to investigate the correlation between plastic and other anthropogenic microparticle contamination and their feeding habits in the eastern region of the Gulf of California, revealing a debris contamination occurrence of 79.3%. Out of these, 91.4% corresponded to fibers, and the remaining 8.6% to fragments. The main component of the debris was cellulose (64.4%). According to their diet, these organisms exhibit benthopelagic habits, feeding both in the water column and on the seabed. These results indicate a high level of contamination of anthropogenic cellulosic microfibers in the area. Although cellulosic microfibers are recognized as a biomaterial, they can be harmful to marine species, posing an additional threat to this iconic shark. This changed according to the year, indicating that the anthropogenic microparticle ingestion is related to the discharges of human activities and their seasonality rather than to a selection process by the sharks.

Electroactive polylactic acid nanofiber multilayer membranes as "Green" flexible electrode for supercapacitor

Against the backdrop of the post-COVID-19 era, the demand for masks has become increasingly steady, discarded masks have brought about new environmental problems due to the lack of effective means of disposal as well as recycling mechanisms. To solve this problem, we make secondary use of discarded polylactic acid (PLA) masks. The nanofiber multilayer membranes PLA/PDA/GO/PPy were synthesized by layer-by-layer self-assembly for flexible supercapacitors (SCs). The multiple coating on PLA significantly increases the capacitive performance. Optimization of the PLA/PDA/GO/PPy demonstrates capacitance up to 1331 mF cm-2. Symmetric aqueous SCs using PLA/PDA/GO/PPy electrodes show higher energy density than other literature-reported SCs based on nanofiber multilayer membranes. In addition, we also explored the effects of discarded PLA/PDA/GO/PPy on the growth of ryegrass and canola in the soil. The exceptional combination of remarkable electrochemical properties and excellent environmental friendliness makes the PLA membrane promising for supercapacitors.

COVID-19 pandemic-related drugs and microplastics from mask fibers jointly affect soil functions and processes

The COVID-19 pandemic has led to an unprecedented increase in pharmaceutical drug consumption and plastic waste disposal from personal protective equipment. Most drugs consumed during the COVID-19 pandemic were used to treat other human and animal diseases. Hence, their nearly ubiquitous presence in the soil and the sharp increase in the last 3 years led us to investigate their potential impact on the environment. Similarly, the compulsory use of face masks has led to an enormous amount of plastic waste. Our study aims to investigate the combined effects of COVID-19 drugs and microplastics from FFP2 face masks on important soil processes using soil microcosm experiments. We used three null models (additive, multiplicative, and dominative models) to indicate potential interactions among different pharmaceutical drugs and mask MP. We found that the multiple-factor treatments tend to affect soil respiration and FDA hydrolysis more strongly than the individual treatments. We also found that mask microplastics when combined with pharmaceuticals caused greater negative effects on soil. Additionally, null model predictions show that combinations of high concentrations of pharmaceuticals and mask MP have antagonistic interactions on soil enzyme activities, while the joint effects of low concentrations of pharmaceuticals (with or without MP) on soil enzyme activities are mostly explained by null model predictions. Our study underscores the need for more attention on the environmental side effects of pharmaceutical contamination and their potential interactions with other anthropogenic global change factors.

Global daily mask use estimation in the pandemic and its post environmental health risks: Analysis based on a validated dynamic mathematical model

The outbreak of the COVID-19 pandemic led to a sharp increase in disposable surgical mask usage. Discarded masks can release microplastic and cause environmental pollution. Since masks have become a daily necessity for protection against virus infections, it is necessary to review the usage and disposal of masks during the pandemic for future management. In this study, we constructed a dynamic model by introducing related parameters to estimate daily mask usage in 214 countries from January 22, 2020 to July 31, 2022. And we validated the accuracy of our model by establishing a dataset based on published survey data. Our results show that the cumulative mask usage has reached 800 billion worldwide, and the microplastics released from discarded masks due to mismanagement account for 3.27% of global marine microplastic emissions in this period. Furthermore, we illustrated the response relationship between mask usage and the infection rates. We found a marginally significant negative correlation existing between the mean daily per capita mask usage and the rate of cumulative confirmed cases within the range of 25% to 50%. This indicates that if the rate reaches the specified threshold, the preventive effect of masks may become evident.

Microplastics and viruses in the aquatic environment: a mini review

Microplastics (MPs) have been widely found in the environment and have exerted non-negligible impacts on the environment and human health. Extensive research has shown that MPs can act as carriers for viruses and interacts with them in various ways. Whether MPs influence the persistence, transmission and infectivity of virus has attracted global concern in the context of increasing MPs contamination. This review paper provides an overview of the current state of knowledge regarding the interactions between MPs and viruses in aquatic environments. Latest progress and research trends in this field are summarized based on literature analysis. Additionally, we discuss the potential risks posed by microplastic-associated viruses to human health and the environmental safety, highlighting that MPs can affect viral transmission and infectivity through various pathways. Finally, we underscores the need for further research to address key knowledge gaps, such as elucidating synergistic effects between MPs and viruses, understanding interactions under real environmental conditions, and exploring the role of biofilms in virus-MPs interactions. This review aims to contribute to a deeper understanding on the transmission of viruses in the context of increasing MPs pollution in water, and promote actions to reduce the potential risks.

The boom era of emerging contaminants: A review of remediating agricultural soils by biochar

Emerging contaminants (ECs) are widely sourced persistent pollutants that pose a significant threat to the environment and human health. Their footprint spans global ecosystems, making their remediation highly challenging. In recent years, a significant amount of literature has focused on the use of biochar for remediation of heavy metals and organic pollutants in soil and water environments. However, the use of biochar for the remediation of ECs in agricultural soils has not received as much attention, and as a result, there are limited reviews available on this topic. Thus, this review aims to provide an overview of the primary types, sources, and hazards of ECs in farmland, as well as the structure, functions, and preparation types of biochar. Furthermore, this paper emphasizes the importance and prospects of three remediation strategies for ECs in cropland: (i) employing activated, modified, and composite biochar for remediation, which exhibit superior pollutant removal compared to pure biochar; (ii) exploring the potential synergistic efficiency between biochar and compost, enhancing their effectiveness in soil improvement and pollution remediation; (iii) utilizing biochar as a shelter and nutrient source for microorganisms in biochar-mediated microbial remediation, positively impacting soil properties and microbial community structure. Given the increasing global prevalence of ECs, the remediation strategies provided in this paper aim to serve as a valuable reference for future remediation of ECs-contaminated agricultural lands.

Disposable surgical/medical face masks and filtering face pieces: Source of microplastics and chemical additives in the environment

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

A review of the influence of environmental pollutants (microplastics, pesticides, antibiotics, air pollutants, viruses, bacteria) on animal viruses

Microorganisms, especially viruses, cause disease in both humans and animals. Environmental chemical pollutants including microplastics, pesticides, antibiotics sand air pollutants arisen from human activities affect both animal and human health. This review assesses the impact of chemical and biological contaminants (virus and bacteria) on viruses including its life cycle, survival, mutations, loads and titers, shedding, transmission, infection, re-assortment, interference, abundance, viral transfer between cells, and the susceptibility of the host to viruses. It summarizes the sources of environmental contaminants, interactions between contaminants and viruses, and methods used to mitigate such interactions. Overall, this review provides a perspective of environmentally co-occurring contaminants on animal viruses that would be useful for future research on virus-animal-human-ecosystem harmony studies to safeguard human and animal health.

Nrf2-mediated ferroptosis of spermatogenic cells involved in male reproductive toxicity induced by polystyrene nanoplastics in mice

Microplastics (MPs) and nanoplastics (NPs) have become hazardous materials due to the massive amount of plastic waste and disposable masks, but their specific health effects remain uncertain. In this study, fluorescence-labeled polystyrene NPs (PS-NPs) were injected into the circulatory systems of mice to determine the distribution and potential toxic effects of NPs in vivo. Interestingly, whole-body imaging found that PS-NPs accumulated in the testes of mice. Therefore, the toxic effects of PS-NPs on the reproduction systems and the spermatocytes cell line of male mice, and their mechanisms, were investigated. After oral exposure to PS-NPs, their spermatogenesis was affected and the spermatogenic cells were damaged. The spermatocyte cell line GC-2 was exposed to PS-NPs and analyzed using RNA sequencing (RNA-seq) to determine the toxic mechanisms; a ferroptosis pathway was found after PS-NP exposure. The phenomena and indicators of ferroptosis were then determined and verified by ferroptosis inhibitor ferrostatin-1 (Fer-1), and it was also found that nuclear factor erythroid 2-related factor 2 (Nrf2) played an important role in spermatogenic cell ferroptosis induced by PS-NPs. Finally, it was confirmed in vivo that this mechanism of Nrf2 played a protective role in PS-NPs-induced male reproductive toxicity. This study demonstrated that PS-NPs induce male reproductive dysfunction in mice by causing spermatogenic cell ferroptosis dependent on Nrf2.

Assessment of inhalation exposure to microplastic particles when disposable masks are repeatedly used

Wearing masks to prevent infectious diseases, especially during the COVID-19 pandemic, is common. However, concerns arise about inhalation exposure to microplastics (MPs) when disposable masks are improperly reused. In this study, we assessed whether disposable masks release inhalable MPs when reused in simulated wearing conditions. All experiments were conducted using a controlled test chamber setup with a constant inspiratory flow. Commercially available medical masks with a three-layer material, composition comprising polypropylene (PP in the outer and middle layers) and polyethylene (PE in the inner layer), were used as the test material. Brand-new masks with and without hand rubbing, as well as reused medical masks, were tested. Physical properties (number, size, and shape) and chemical composition (polymers) were identified using various analytical techniques such as fluorescence staining, fluorescence microscopy, and micro-Fourier Transform Infrared Spectroscopy (μFTIR). Scanning Electron Microscopy (SEM) was used to scrutinize the surface structure of reused masks across different layers, elucidating the mechanism behind the MP generation. The findings revealed that brand-new masks subjected to hand rubbing exhibited a higher cumulative count of MPs, averaging approximately 1.5 times more than those without hand rubbing. Fragments remained the predominant shape across all selected size classes among the released MPs from reused masks, primarily through a physical abrasion mechanism, accounting for >90 % of the total MPs. The numbers of PE particles were higher than PP particles, indicating that the inner layer of the mask contributed more inhalable MPs than the middle and outer layers combined. The released MPs from reused masks reached their peak after 8 h of wearing. This implies that regularly replacing masks serves as a preventive measure and mitigates associated health risks of inhalation exposure to MPs.

The Fate of Microplastics, Derived from Disposable Masks, in Natural Aquatic Environments

This paper mainly reviews the fate of microplastics, released from used face masks, in the water environment. Through previous experiments, the amount of fiber microplastics released from used face masks into aqueous environments was not negligible, with the maximum microplastics releasing amount reaching 10,000 piece·day-1 for each mask. Microplastic derived from these masks often occurred in the shape of polymeric fibers that resulted from the breakage of the chemical bonds in the plastic fibers by the force of water flow. The potential contact forces between microplastics (originating from face masks) with other pollutants, primarily encompass hydrophobic and electrostatic interactions. This critical review paper briefly illustrates the fate of microplastics derived from disposable face masks, further devising effective strategies to mitigate the environmental impact of plastic particle release from the used personal protective equipment.

Prevalence of pharmaceuticals and personal care products, microplastics and co-infecting microbes in the post-COVID-19 era and its implications on antimicrobial resistance and potential endocrine disruptive effects

The COVID-19 (coronavirus disease 2019) pandemic's steady condition coupled with predominance of emerging contaminants in the environment and its synergistic implications in recent times has stoked interest in combating medical emergencies in this dynamic environment. In this context, high concentrations of pharmaceutical and personal care products (PPCPs), microplastics (MPs), antimicrobial resistance (AMR), and soaring coinfecting microbes, tied with potential endocrine disruptive (ED) are critical environmental concerns that requires a detailed documentation and analysis. During the pandemic, the identification, enumeration, and assessment of potential hazards of PPCPs and MPs and (used as anti-COVID-19 agents/applications) in aquatic habitats have been attempted globally. Albeit receding threats in the magnitude of COVID-19 infections, both these pollutants have still posed serious consequences to aquatic ecosystems and the very health and hygiene of the population in the vicinity. The surge in the contaminants post-COVID also renders them to be potent vectors to harbor and amplify AMR. Pertinently, the present work attempts to critically review such instances to understand the underlying mechanism, interactions swaying the current health of our environment during this post-COVID-19 era. During this juncture, although prevention of diseases, patient care, and self-hygiene have taken precedence, nevertheless antimicrobial stewardship (AMS) efforts have been overlooked. Unnecessary usage of PPCPs and plastics during the pandemic has resulted in increased emerging contaminants (i.e., active pharmaceutical ingredients and MPs) in various environmental matrices. It was also noticed that among COVID-19 patients, while the bacterial co-infection prevalence was 0.2-51%, the fungi, viral, protozoan and helminth were 0.3-49, 1-22, 2-15, 0.4-15% respectively, rendering them resistant to residual PPCPs. There are inevitable chances of ED effects from PPCPs and MPs applied previously, that could pose far-reaching health concerns. Furthermore, clinical and other experimental evidence for many newer compounds is very scarce and demands further research. Pro-active measures targeting effective waste management, evolved environmental policies aiding strict regulatory measures, and scientific research would be crucial in minimizing the impact and creating better preparedness towards such events among the masses fostering sustainability.

Recycling of discarded face masks for modification and use in SBS-modified bitumen

Since the outbreak of the COVID-19 pandemic, the discarded face masks have attracted widespread attention in society. In line with sustainable development, a physicochemical treatment method was used to recycle discarded face masks into styrene-butadiene-styrene (SBS) modified bitumen. Utilizing the highly adhesive polydopamine-polyethyleneimine (PDA-PEI) coating, it has improved the surface damage of the discarded face mask fibers (DFMF) caused by natural aging and mechanical fragmentation, simultaneously strengthening the connection between the fibers and bitumen. At 46 °C, the 2% embellish-face mask fiber (E-FMF)/SBS modified bitumen, compared to the 2%DFMF/SBS modified bitumen, exhibited improvements in complex modulus (G*), elastic modulus (G'), and loss modulus (G″) by 12.27%, 16.39%, and 13.35%, respectively. Furthermore, at 0.1 kPa and 3.2 kPa, the creep recovery rate (R) increased by 23.3% and 32%, and the average creep compliance (Jnr) decreased by 54.7% and 64%. It was demonstrated that DFMF adhered with the coating, were more effective in improving the mechanical properties, deformation resistance, and shear resistance of the bitumen. This approach enriches the application scenarios of discarded single-use face masks and supports environmental protection and road construction.

From oceans to dinner plates: The impact of microplastics on human health

Microplastics, measuring less than 5 mm in diameter, are now found in various environmental media, including soil, water, and air, and have infiltrated the food chain, ultimately becoming a part of the human diet. This study offers a comprehensive examination of the intricate nexus between microplastics and human health, thereby contributing to the existing knowledge on the subject. Sources of microplastics, including microfibers from textiles, personal care products, and wastewater treatment plants, among others, were assessed. The study meticulously examined the diverse routes of microplastic exposure-ingestion, inhalation, and dermal contact-offering insights into the associated health risks. Notably, ingestion of microplastics has been linked to gastrointestinal disturbances, endocrine disruption, and the potential transmission of pathogenic bacteria. Inhalation of airborne microplastics emerges as a critical concern, with possible implications for respiratory and cardiovascular health. Dermal contact, although less explored, raises the prospect of skin irritation and allergic reactions. The impacts of COVID-19 on microplastic pollution were also highlighted. Throughout the manuscript, the need for a deeper mechanistic understanding of microplastic interactions with human systems is emphasized, underscoring the urgency for further research and public awareness.

Plastics and Micro/Nano-Plastics (MNPs) in the Environment: Occurrence, Impact, and Toxicity

Plastics, due to their varied properties, find use in different sectors such as agriculture, packaging, pharmaceuticals, textiles, and construction, to mention a few. Excessive use of plastics results in a lot of plastic waste buildup. Poorly managed plastic waste (as shown by heaps of plastic waste on dumpsites, in free spaces, along roads, and in marine systems) and the plastic in landfills, are just a fraction of the plastic waste in the environment. A complete picture should include the micro and nano-plastics (MNPs) in the hydrosphere, biosphere, lithosphere, and atmosphere, as the current extreme weather conditions (which are effects of climate change), wear and tear, and other factors promote MNP formation. MNPs pose a threat to the environment more than their pristine counterparts. This review highlights the entry and occurrence of primary and secondary MNPs in the soil, water and air, together with their aging. Furthermore, the uptake and internalization, by plants, animals, and humans are discussed, together with their toxicity effects. Finally, the future perspective and conclusion are given. The material utilized in this work was acquired from published articles and the internet using keywords such as plastic waste, degradation, microplastic, aging, internalization, and toxicity.

Personal protective equipment-derived pollution during Covid-19 era: A critical review of ecotoxicology impacts, intervention strategies, and future challenges

During the COVID-19 pandemic, people used personal protective equipment (PPE) to lessen the spread of the virus. The release of microplastics (MPs) from discarded PPE is a new threat to the long-term health of the environment and poses challenges that are not yet clear. PPE-derived MPs have been found in multi-environmental compartments, e.g., water, sediments, air, and soil across the Bay of Bengal (BoB). As COVID-19 spreads, healthcare facilities use more plastic PPE, polluting aquatic ecosystems. Excessive PPE use releases MPs into the ecosystem, which aquatic organisms ingest, distressing the food chain and possibly causing ongoing health problems in humans. Thus, post-COVID-19 sustainability depends on proper intervention strategies for PPE waste, which have received scholarly interest. Although many studies have investigated PPE-induced MPs pollution in the BoB countries (e.g., India, Bangladesh, Sri Lanka, and Myanmar), the ecotoxicity impacts, intervention strategies, and future challenges of PPE-derived waste have largely gone unnoticed. Our study presents a critical literature review covering the ecotoxicity impacts, intervention strategies, and future challenges across the BoB countries (e.g., India (162,034.45 tons), Bangladesh (67,996 tons), Sri Lanka (35,707.95 tons), and Myanmar (22,593.5 tons). The ecotoxicity impacts of PPE-derived MPs on human health and other environmental compartments are critically addressed. The review's findings infer a gap in the 5R (Reduce, Reuse, Recycle, Redesign, and Restructure) Strategy's implementation in the BoB coastal regions, hindering the achievement of UN SDG-12. Despite widespread research advancements in the BoB, many questions about PPE-derived MPs pollution from the perspective of the COVID-19 era still need to be answered. In response to the post-COVID-19 environmental remediation concerns, this study highlights the present research gaps and suggests new research directions considering the current MPs' research advancements on COVID-related PPE waste. Finally, the review suggests a framework for proper intervention strategies for reducing and monitoring PPE-derived MPs pollution in the BoB countries.

Global face mask pollution: threats to the environment and wildlife, and potential solutions

Face masks are an indispensable low-cost public healthcare necessity for containing viral transmission. After the coronavirus disease (COVID-19) became a pandemic, there was an unprecedented demand for, and subsequent increase in face mask production and use, leading to global ecological challenges, including excessive resource consumption and significant environmental pollution. Here, we review the global demand volume for face masks and the associated energy consumption and pollution potential throughout their life cycle. First, the production and distribution processes consume petroleum-based raw materials and other energy sources and release greenhouse gases. Second, most methods of mask waste disposal result in secondary microplastic pollution and the release of toxic gases and organic substances. Third, face masks discarded in outdoor environments represent a new plastic pollutant and pose significant challenges to the environment and wildlife in various ecosystems. Therefore, the long-term impacts on environmental and wildlife health aspects related to the production, use, and disposal of face masks should be considered and urgently investigated. Here, we propose five reasonable countermeasures to alleviate these global-scale ecological crises induced by mask use during and following the COVID-19 pandemic era: increasing public awareness; improving mask waste management; innovating waste disposal methods; developing biodegradable masks; and formulating relevant policies and regulations. Implementation of these measures will help address the pollution caused by face masks.

Functional Fiber Membranes with Antibacterial Properties for Face Masks

Reusable face masks are an important alternative for minimizing costs of disposable and surgical face masks during pandemics. Often complementary to washing, a prolonged lifetime of face masks relies on the incorporation of self-cleaning materials. The development of self-cleaning face mask materials requires the presence of a durable catalyst to deactivate contaminants and microbes after long-term use without reducing filtration efficiency. Herein, we generate self-cleaning fibers by functionalizing silicone-based (polydimethylsiloxane, PDMS) fibrous membranes with a photocatalyst. Coaxial electrospinning is performed to fabricate fibers with a non-crosslinked silicone core within a supporting shell scaffold, followed by thermal crosslinking and removal of the water-soluble shell. Photocatalytic zinc oxide nanoparticles (ZnO NPs) are immobilized on the PDMS fibers by colloid-electrospinning or post-functionalization procedures. The fibers functionalized with ZnO NPs can degrade a photo-sensitive dye and display antibacterial properties against Gram-positive and Gram-negative bacteria (Escherichia coli and Staphylococcus aureus) due to the generation of reactive oxygen species upon irradiation with UV light. Furthermore, a single layer of functionalized fibrous membrane shows an air permeability in the range of 80-180 L/m2s and 65% filtration efficiency against fine particulate matter with a diameter less than 1.0 µm (PM1.0).

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-023-00291-7.

A first report on the spatial and temporal variability of microplastics in coastal soils of an urban town in south-western India: Pre- and post-COVID scenario

We present a first study on the temporal changes (2019-2021) in the microplastic abundance in the coastal soils of an urban town in the south-western part of India. All sampling stations exhibited higher abundances of microplastics in soils collected during 2021 (959.7 ± 277.7 particles/kg) compared to those collected in 2019 (515.1 ± 182.7 particles/kg). Morphologically, flakes, fibres, and films are the most abundant types documented in the soil environment. The microplastics of 0.3-5 mm size are relatively more abundant (60.6 %) compared to those of 0.03-0.3 mm size (39.4 %) in 2021. The three main types of polymers (polypropylene and high- and low-density polyethylene) in the soil exhibited an increase in abundance during an interval of 15 months (October 2019 to March 2021). In addition to packaging materials, the enhanced use of surgical masks during the COVID-19 period might have acted as a source of microplastic contamination in the soils.

A review of disposable facemasks during the COVID-19 pandemic: A focus on microplastics release

The COVID-19 epidemic seriously threats the human society and provokes the panic of the public. Personal Protective Equipment (PPE) are widely utilized for frontline health workers to face the ongoing epidemic, especially disposable face masks (DFMs) to prevent airborne transmission of coronavirus. The overproduction and massive utilization of DFMs seriously challenge the management of plastic wastes. A huge amount of DFMs are discharged into environment, potentially induced the generation of microplastics (MPs) owing to physicochemical destruction. The MPs release will pose severe contamination burden on environment and human. In this review, environmental threats of DFMs regarding to DFMs fate in environment and DFMs threats to aquatic and terrestrial species were surveyed. A full summary of recent studies on MPs release from DFMs was provided. The knowledge of extraction and characterizations of MPs, the release behavior, and potential threats of MPs derived from DFMs was discussed. To confront the problem, feasible strategies for control DFMs pollution were analyzed from the perspective of source control and waste management. This review provides a better understanding the threats, fate, and management of DFMs linked to COVID-19 pandemic.

Analysis of airborne sputum droplets flow dynamic behaviors under different ambient conditions and aerosol size effects

The coronavirus (COVID-19) is becoming more threatening with the emergence of new mutations. New virus transmission and infection processes remain challenging and re-examinations of proper protection methods are urgently needed. From fluid dynamic viewpoint, the transmission of virus-carrying droplets and aerosols is one key to understanding the virus-transmission mechanisms. This study shows virus transmission by incorporating flow-evaporation model into the Navier-Stokes equation to describe the group of airborne sputum droplets exhaled under Rosin-Rammler distribution. Solid components and humidity field evolution are incorporated in describing droplet and ambient conditions. The numerical model is solved by an inhouse code using advection-diffusion equation for the temperature field and the humidity field, discretized by applying the total-variation diminishing Runge-Kutta method. The results of this study are presented in detail to show the different trends under various ambient conditions and to reveal the major viral-transmission routes as a function of droplet size.