Trace analysis of per- and polyfluorinated alkyl substances in various matrices—How do current methods perform?

Evaluation of PFAS extraction and analysis methods for biosolids

Per- and polyfluoroalkyl substances (PFAS) in the environment is a growing concern leading to a focus on PFAS occurrence in biosolids, a byproduct of wastewater treatment processes, often applied to improve soil health. This led to the need for analytical method development for assessing PFAS in biosolids. This study compares three methods for PFAS quantitation, evaluating solvent extraction, clean-up techniques, and final injection solvents. Three biosolids examined included not stabilized, anaerobically digested, and activated sludge with long-term lagoon-stabilized solids, resulting in differing properties. One method is a methanolic extraction with ENVI-Carb clean-up (ME), modified by adding isopropanol (ME-P) to the injection vial to prevent emulsification that can occur with more complex biosolids matrices. The second method was the U.S. EPA 1633 method involving additional solid-phase extraction (SPE) and filtration while the third method was Quick Easy Cheap Effective Rugged and Safe (QuEChERS), yet to be tested on biosolids. Method performance was evaluated based on instrument precision, limit of quantitation (LOQ), and extraction recoveries. PFAS concentrations and recoveries were similar for Me-P and 1633 methods while QuEChERS performed poorly. Method 1633 exhibited better reproducibility with lower relative standard deviations but had higher LOQ values due to sample dilution. Most LOQs ranged between 0.06 and 0.3 μg/kg across methods, while recovery of spiked native PFAS ranged between 70 and 130 % in most cases. Methanol-based mobile phases resulted in better peak shape. ME-P excelled in overall cost-effectiveness showing superior extraction efficiency with fewer operational steps compared to other methods for PFAS quantitation in biosolids.

Quality assurance and quality control for human biomonitoring data-focus on matrix reference materials

Human biomonitoring (HBM) is an essential tool for making evidence-based policy decisions upon assessment of human exposure to pollutants. In contrast, the heterogeneity of data reliability across studies has been identified as a weakness in current HBM research. The scientific community is currently encountering measurement challenges due to gaps in the availability of quality assurance/quality control (QA/QC) tools. This article provides a summarised view on the availability of reference materials in human matrices such as hair, serum, blood, plasma, urine, and breast milk for selected groups of organic contaminants (e.g., pesticides, flame retardants, perfluorinated compounds, perchlorate, phthalates, phenols) and elements (e.g., mercury, arsenic, cadmium, chromium, lead, nickel, tin) of relevance to human health. The QA/QC situation of HBM measurement data with regard to laboratories' performance in proficiency testing schemes is also addressed, highlighting areas for improvement. Finally, the article uses the example of per- and polyfluoroalkyl substance analysis to illustrate QA/QC challenges specifically related to the HBM field.

A systematic review for non-targeted analysis of per- and polyfluoroalkyl substances (PFAS)

This review follows the PRISMA guidelines to provide a systematic review of 115 peer reviewed articles that used non-targeted analysis (NTA) methods to detect per- and polyfluoroalkylated substances (PFAS). This literature highlights the significant positive impact of NTA in understanding PFAS in the environment. Within the literature a geographical bias exists, with most NTA studies (∼60 %) conducted in the United States and China. Future studies in other regions (such as South America and Africa) are needed to gain a more global understanding. More research is required in marine environments and the atmosphere, as current studies focus mainly on freshwater, groundwater, soil, and sediments. The majority of studies focus on measuring PFAS in the environment, rather than in commercial products (with the exception of AFFF). Non-lethal blood sampling has been successful for NTA in humans and wildlife, but additional biomonitoring studies are required on exposed cohorts to understand health risks and PFAS biotransformation pathways. NTA methods mostly use liquid chromatography and negative ionisation, which biases the literature towards the detection of specific PFAS. Despite improvements in data reporting and quality assurance and control (QA/QC) procedures, factors such as false negative and false positive rates are often overlooked, and many NTA workflows remain highly subjective. Perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs) are the most detected PFAS classes, identified in over 80 % of NTA studies, and are common in routine monitoring. However, our review identified >1000 PFAS from a total of 382 different PFAS classes, with over 300 classes found in fewer than 5 % of studies. This highlights the variety of different PFAS present in the environment, and the limitations of relying solely on targeted methods. Future monitoring programs and regulations would benefit from considering NTA methods to provide more comprehensive information on PFAS present in the environment.

Interrogation of a fluoropolymer dispersion manufactured with a non-fluorinated polymerization aid for targeted and non-targeted fluorinated residuals by liquid chromatography high resolution mass spectrometry

Recent advances in fluoropolymer polymerization have focused on replacing perfluorinated polymerization aids (PAs) with hydrocarbon-based alternatives. Hydrocarbon PAs are vulnerable to fluorinated radicals during polymerization, leading to the creation of hundreds of process-specific polyfluorinated residuals. These residuals, which include low molecular weight extractable or leachable impurities, are challenging to detect at trace levels. This study investigates a polytetrafluoroethylene (PTFE) dispersion prepared with a hydrocarbon-based surfactant (DOSS) to measure these process-specific fluorinated residues. Liquid chromatography high resolution mass spectrometry is one of the few analytical methods that offers the sensitivity and selectivity required to detect these residuals in complex matrices at concentrations as low as parts per billion. The results indicate that using a hydrocarbon PA during emulsion polymerization produces numerous polyfluorinated residuals. These must be identified and monitored to develop effective abatement strategies, ensuring responsible fluoropolymer manufacturing.

Evaluation of fluorous affinity using fluoroalkyl-modified silica gel and selective separation of poly-fluoroalkyl substances in organic solvents

In this study, we focused on the fluorous affinity acting among fluorine compounds, and then developed a new separation medium and evaluated their performance. We prepared the stationary phases for a column using silica gel-modified alkyl fluoride and investigated the characteristics of fluorous affinity by comparing them with a typical stationary phase, which does not contain fluorine, using high-performance liquid chromatography (HPLC). In HPLC measurements, we confirmed that while all non-fluorine compounds were not retained, retention of fluorine compounds increased as the number of fluorine increased with the stationary phase. It also revealed that the strength of fluorous affinity changes depending on the types of the organic solvent; the more polar the solvent, the stronger the effect. Additionally, the stationary phase was employed to compare the efficiency of our column with that of a commercially available column, Fluofix-II. The retention selectivity was almost the same, but the absolute retention strength was slightly higher on our column, indicating that the column is available for practical use.

Formation of volatile chlorinated and brominated products during low temperature thermal decomposition of the representative PFAS perfluorohexane sulfonate (PFHxS) in the presence of NaCl and NaBr

Per- and polyfluoroalkyl substances (PFAS) are synthetic organofluorine compounds known for their chemical and physical stability as well as their wide range of uses. Some PFAS are widely distributed in the environment, leading to concerns related to both environmental and human health. High temperature thermal treatment (i.e., incineration) has been utilized for PFAS treatment, but this requires significant infrastructure and energy, prompting interest in lower temperature approaches that may still lead to efficient destruction. Lower treatment temperatures, however, increase the potential for incomplete PFAS mineralization and formation of volatile organofluorine (VOF) products. Herein, we report the formation of novel VOF products that include chlorinated and brominated compounds during the thermal treatment of potassium perfluorohexane sulfonate (PFHxS), a representative perfluoroalkyl acid (PFAA). By comparing the gas chromatography-mass spectrometry (GC-MS) results of known VOF stocks to evolved VOF during thermal treatment of PFAS, the formation of perfluorohexyl chloride and perfluorohexyl bromide was observed when PFHxS was heated at temperatures between 275 and 475 °C in the presence of NaCl and NaBr, respectively. To our knowledge, this is the first report of chlorinated or brominated VOF products during thermal treatment of a PFAA. These findings suggest that a range of mixed halogenated VOF may form during thermal treatment of PFAS at relatively low temperature (e.g., 500 °C) and that these can be a function of salts present in the matrix.

Nitro Indole Derivatives as Novel Dual-Polarity Matrices for MALDI Mass Spectrometry and Imaging with Broad Applications

A new matrix framework is presented in this study for the improved ionization efficiency of complex mixtures by matrix-assisted laser desorption ionization (MALDI) mass spectrometry/imaging. Five nitro indole (NI) derivatives [3-methyl-4-nitro-1H-indole (3,4-MNI), 3-methyl-6-nitro-1H-indole (3,6-MNI), 2,3-dimethyl-4-nitro-1H-indole (2,3,4-DMNI), 2,3-dimethyl-6-nitro-1H-indole (2,3,6-DMNI), and 4-nitro-1H-indole (4-NI)] were synthesized and shown to produce both positive and negative ions with a broad class of analytes as MALDI matrices. NI matrices were compared to several common matrices, such as 2,5-dihydroxybenzoic acid (DHB), alpha-cyano-4-hydroxylcinnamic acid (CHCA), sinapinic acid (SA), 1,5-diaminonaphthelene (1,5-DAN), and 9-aminoacridine (9-AA), for the analysis of lipid, peptide, protein, glycan, and perfluorooctanesulfonic acid (PFOS) compounds. 3,4-MNI demonstrated the best performance among the NI matrices. This matrix resulted in reduced ion suppression and better detection sensitivity for complex mixtures, for example, egg lipids/milk proteins/PFOS in tap water, while 2,3,6-DMNI was the best matrix for blueberry tissue imaging. Several important aspects of this work are reported: (1) dual-polarity ion production with NI matrices and complex mixtures; (2) quantitative analysis of PFOS with a LOQ of 0.5 ppb in tap water and 0.05 ppb in MQ water (without solid phase extraction enrichment), with accuracy and precision within 5%; (3) MALDI imaging with 2,3,6-DMNI as a matrix for plant metabolite/lipid identification with ionization enhancement in the negative ion mode m/z 600-900 region; and (4) development of a thin film deposition under/above tissue method for MALDI imaging with a vacuum sublimation matrix on a high-vacuum MALDI instrument.

The Latest Sensor Detection Methods for per- and Polyfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFASs) have emerged as a prominent environmental pollutant in recent years, primarily due to their tendency to accumulate and magnify in both the environment and living organisms. The entry of PFASs into the environment can have detrimental effects on human health. Hence, it is crucial to actively monitor and detect the presence of PFASs. The current standard detection method of PFAS is the combination of chromatography and mass spectrometry. However, this requires expensive instruments, extra sample pretreatment steps, complicated operation and long analysis time. As a result, new methods that do not rely on chromatography and mass spectrometry have been developed and applied. These alternative methods mainly include optical and electrochemical sensor methods, which offer great potential in terms of real-time field detection, instrument miniaturization, shorter analysis time, and reduced detection cost. This review provides a summary of recent advancements in PFAS detection sensors. We categorize and explain the principles and mechanisms of these sensors, and compare their limits of detection and sensitivity. Finally, we discuss the future challenges and improvements needed for PFAS sensors, such as field application, commercialization, and other related issues.

Unveiling the hidden threat: spatiotemporal trends and source apportionments of per-and polyfluorinated alkyl substances in wastewater treatment plants in South Africa

At least 11 per-and polyfluorinated alkyl substances (PFASs) were more prevalent during the dry season, whereas only PFBA, L-PFBS, L-PFOS, and PFOA were prevalent during the wet season in 11 WWTPs. The ∑21 PFAS levels in the influent and the effluent ranged from 137 to 3327 ng/L and 265-7,699 ng/L in the dry season and 61-2,953 ng/L and 171-3,458 ng/L in the wet season, respectively. The highest mean concentrations were observed in the influent and effluent for PFOA (586 ng/L) and L-PFBS (552 ng/L); and FOET (1,399 ng/L) and PFNA (811 ng/L) during dry and wet seasons, respectively. During the wet season, 6:2 FTS was observed at the highest concentrations, exhibiting 4,900 ng/L (66%) and 2,351 ng/L (39%), 1,950 ng/L (53%) in SST and BNR, respectively. Principal component analysis (PCA), hierarchical clustering (HCA), and PFHpA/PFOA, PFBA/PFOA, and PFNA/PFOA ratios revealed mixtures of PFAS sources into WWTPs.

Associations between prenatal exposure to per- and polyfluoroalkyl substances and wheezing and asthma symptoms in 4-year-old children: The Japan Environment and Children's Study

The effects of early-life exposure to per- and polyfluoroalkyl substances (PFAS) on the onset of asthma in children have been unclear. We examined the association between prenatal PFAS exposure and wheezing and asthma symptoms among 4-year-old children in a total of 17,856 mother-child pairs from the Japan Environment and Children's Study. Maternal first-trimester serum concentrations of six PFAS were used for the exposure assessment. We defined "wheeze ever," "current wheeze," "current symptoms of severe asthma," and "asthma ever" at the age of 4 years by the responses to the International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire, and "doctor-diagnosed asthma" by the response to a corresponding question. Multivariate logistic regression models were used to examine exposure-outcome associations. Our findings revealed that doubling of the PFOA concentration was associated with a reduced occurrence of "wheeze ever," yielding an adjusted odds ratio of 0.94 (95% CI: 0.90-0.98). Also, doubling in the concentrations of PFOA and PFHxS was associated with a decreased prevalence of "asthma ever," with adjusted odds ratios of 0.94 (95% CI: 0.88-1.00) and 0.95 (95% CI: 0.90-0.99), respectively. However, these associations were not significant after applying the Bonferroni correction. The estimated exposure-response curves were nearly linear with a subtle or flat slope. When stratified by the child's sex or the mother's history of asthma, most of the estimated confidence intervals were overlapped between each pair of strata. Regional stratification analysis indicated low-to-moderate heterogeneity in 12 exposure-outcome pairs and moderate-to-high heterogeneity in 9 out of the 30 examined pairs. This study found no clear associations between prenatal PFAS exposure and the prevalence of wheezing and asthma among children at the age of 4 years.

Optimization for the analysis of 42 per- and polyfluorinated substances in human plasma: A high-throughput method for epidemiological studies

There is an increasing awareness about the presence of per- and polyfluoroalkyl substances (PFAS) in many environmental and biological compartments, including human biofluids and tissues. However, the increase of PFAS replacements, including alternatives with shorter chain or less bioaccumulative potential, has broaden the exposure and the need for wider identification procedures. Moreover, the low volumes available for human blood or plasma, and the high number of samples needed to assess adequately epidemiologic studies, require particularly fast, reproducible and, if possible, miniaturized protocols. Therefore, accurate and robust analytical methods are still needed to quantify the PFAS's burden in humans and to understand potential health risks. In this study, we have developed and validated the analysis of 42 PFAS in human plasma by means of a Captiva 96-well micro extraction plate and a LC-q-Orbitrap. For the optimization of the analytical workflow, three extraction/clean-up methods were tested, and the selected one was validated using spiked artificial and bovine plasma at four concentration levels. The final method showed high absolute recoveries for the 42 PFAS, ranging from 52% to 130%, instrumental detection limits between 0.001-0.6 ng mL-1, overall good precision (CV < 20% for most of the PFAS) and a low uncertainty (< 30% of relative expanded deviation, k = 2). The method was further validated both with the NIST plasma Standard Reference Material 1950, showing that the accuracy of the provided results was between 63%-101%, and by the proficiency test arranged by the Arctic Monitoring Assessment Program (AMAP, 2022) obtaining satisfactory results within 95% confidence interval of the assigned value.

Perfluoroalkyl substances in food contact materials: preliminary investigation in Vietnam and global comparison

Per- and polyfluoroalkyl substances (PFASs) are a group of concerned persistent toxic substances, especially for their application or unintentional formation in food contact materials (FCMs). However, information about the occurrence, sources, and fate of these pollutants in food packaging materials from Vietnam as well as Southeast Asian countries is probably still obscured. In this study, levels of 13 perfluoroalkyl carboxylic acids (PFCAs) and 4 sulfonates (PFSs) were determined in various types of food packaging samples collected from Vietnamese markets. Generally low concentrations of total 17 PFASs (median 0.341; max 624 ng/g) suggested that these compounds were mainly inadvertently produced rather than intentionally added to the packaging materials. A few mochi paper tray samples had relatively high PFAS levels (372-624 ng/g), which were dominated by long-chain (C8-C12) PFCAs. A comprehensive and updated overview of PFASs in FCMs from different countries in the world was also provided. Current database could not provide conclusive trends of PFAS concentrations and profiles in FCMs between continents and countries. The highest levels up to ppm were reported for PFCAs (e.g., PFBA, PFHxA, PFOA, and PFDA) and several fluorotelomer alcohols and carboxylic acids, while PFSs were almost absent in FCMs. FPASs can emit from FCMs, migrate to food, and then contribute to dietary exposure in humans and animals. Additional investigations on the occurrence, sources, behavior and fate, and impacts of PFASs in FCMs are critically needed, especially in emerging and developing countries.

Rapid Screening and Quantification of PFAS Enabled by SPME-DART-MS

Per- and polyfluoroalkyl substances (PFAS), an emerging class of toxic anthropogenic chemicals persistent in the environment, are currently regulated at the low part-per-trillion level worldwide in drinking water. Quantification and screening of these compounds currently rely primarily on liquid chromatography hyphenated to mass spectrometry (LC-MS). The growing need for quicker and more robust analysis in routine monitoring has been, in many ways, spearheaded by the advent of direct ambient mass spectrometry (AMS) technologies. Direct analysis in real time (DART), a plasma-based ambient ionization technique that permits rapid automated analysis, effectively ionizes a broad range of compounds, including PFAS. This work evaluates the performance of DART-MS for the screening and quantification of PFAS of different chemical classes, employing a central composite design (CCD) to better understand the interactions of DART parameters on their ionization. Furthermore, in-source fragmentation of the model PFAS was investigated based on the DART parameters evaluated. Preconcentration of PFAS from water samples was achieved by solid phase microextraction (SPME), and extracts were analyzed using the optimized DART-MS conditions, which allowed obtaining linear dynamic ranges (LDRs) within 10 and 5000 ng/L and LOQs of 10, 25, and 50 ng/L for all analytes. Instrumental analysis was achieved in less than 20 s per sample.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

Contributions of reactor geometry and ultrasound frequency on the efficieny of sonochemical reactor

An intermediate-scale reactor with 10L capacity and two transducers operating at 700 and 950 kHz frequencies was developed to study the scalability of the sonolytic destruction of Per and Polyfluoroalkyl substance (PFAS). The impact of frequency, height of liquid or power density, and transducer position on reactor performance was evaluated with the potassium iodide (KI) oxidation and calorimetric power. The dual frequency mode of operation has a synergistic effect based on the triiodide concentration, and calorimetric power. The triiodide concentration, and calorimetric power were higher in this mode compared to the combination of both frequencies operating individually. The sonochemical efficiency for an intermediate-scale reactor (10L) was similar that obtained from a bench-scale reactor (2L), showing the scalability of the sonolytic technology. The placement of the transducer at the bottom or side wall of the reactor had no significant impact on the sonochemical reactivity. The superposition of the ultrasonic field from the dual transducer mode (side and bottom) did not produce a synergistic effect compared to the single transducer mode (bottom or side). This can be attributed to a disturbance due to the interaction of ultrasonic fields of two frequencies from each transducer. With the encouraging results scaling up is in progress for site implementation.

Analytical approaches for screening of per- and poly fluoroalkyl substances in food items: A review of recent advances and improvements

Per and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals characterized by their ubiquitous nature in all environmental compartments which makes them of increasing concern due to their persistence, bioaccumulation, and toxicity (PBT). Several instrumental methodologies and separation techniques have been identified in the literature for the detection and quantification of PFAS in environmental samples. In this review, we have identified and compared common separation techniques adopted for the extraction of PFAS in food items, and analytical methodologies for identification and quantification of PFAS in food items of plant and animal origin, highlighting recent advances in tandem techniques for the high selectivity and separation of PFAS related compounds as well as knowledge gaps and research needs on current analytical methodologies.

A systematic review on distribution, sources and sorption of perfluoroalkyl acids (PFAAs) in soil and their plant uptake

Perfluoroalkyl acids (PFAAs) are ubiquitous in environment, which have attracted increasing concerns in recent years. This study collected the data on PFAAs concentrations in 1042 soil samples from 15 countries and comprehensively reviewed the spatial distribution, sources, sorption mechanisms of PFAAs in soil and their plant uptake. PFAAs are widely detected in soils from many countries worldwide and their distribution is related to the emission of the fluorine-containing organic industry. Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are found to be the predominant PFAAs in soil. Industrial emission is the main source of PFAAs contributing 49.9% of the total concentrations of PFAAs (Ʃ PFAAs) in soil, followed by activated sludge treated by wastewater treatment plants (WWTPs) (19.9%) and irrigation of effluents from WWTPs, usage of aqueous film-forming foam (AFFFs) and leaching of leachate from landfill (30.2%). The adsorption of PFAAs by soil is mainly influenced by soil pH, ionic strength, soil organic matter and minerals. The concentrations of perfluoroalkyl carboxylic acids (PFCAs) in soil are negatively correlated with the length of carbon chain, log K_ow, and log K_oc. The carbon chain lengths of PFAAs are negatively correlated with the root-soil concentration factors (RCFs) and shoot-soil concentration factors (SCFs). The uptake of PFAAs by plant is influenced by physicochemical properties of PFAAs, plant physiology and soil environment. Further studies should be conducted to make up the inadequacy of existing knowledge on the behavior and fate of PFAAs in soil-plant system.

A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities

Per- and polyfluoroalkyl substances (PFAS) have drawn great attention due to their wide distribution in water bodies and toxicity to human beings. Adsorption is considered as an efficient treatment technique for meeting the increasingly stringent environmental and health standards for PFAS. This paper systematically reviewed the current approaches of PFAS adsorption using different adsorbents from drinking water as well as synthetic and real wastewater. Adsorbents with large mesopores and high specific surface area adsorb PFAS faster, their adsorption capacities are higher, and the adsorption process are usually more effective under low pH conditions. PFAS adsorption mechanisms mainly include electrostatic attraction, hydrophobic interaction, anion exchange, and ligand exchange. Various adsorbents show promising performances but challenges such as requirements of organic solvents in regeneration, low adsorption selectivity, and complicated adsorbent preparations should be addressed before large scale implementation. Moreover, the aid of decision-making tools including response surface methodology (RSM), techno-economic assessment (TEA), life cycle assessment (LCA), and multi criteria decision analysis (MCDA) were discussed for engineering applications. The use of these tools is highly recommended prior to scale-up to determine if the specific adsorption process is economically feasible and sustainable. This critical review presented insights into the most fundamental aspects of PFAS adsorption that would be helpful to the development of effective adsorbents for the removal of PFAS in future studies and provide opportunities for large-scale engineering applications.

A new on-line SPE LC-HRMS method for the analysis of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in PM2.5 and its application for screening atmospheric particulates from Dublin and Enniscorthy, Ireland

A sensitive analytical method has been developed and validated for the determination of 16 polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM_2.5) using on-line solid phase extraction (SPE) coupled with liquid chromatography (LC) - negative electrospray ionisation high resolution mass spectrometry (-) ESI-HRMS. On-line SPE allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large volume of sample into the LC system without compromising chromatographic efficiency and resolution. The method provides LODs in the range 0.08-0.5 pg/mL of sample extract allowing detection of selected PFAS in aerosol particles at low fg/m³ level and showed good tolerance to the considered PM matrix. The validated method was applied for analysis of PFAS in ambient PM_2.5 samples collected at two urban locations in Ireland, i.e., Enniscorthy and Dublin. Several PFAS were observed above the detection limit, including perfluorobutyrate (PFBA), perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (L-PFBS) and perfluorononanoic acid (PFNA), as well as fluorotelomer sulfonates: 4:2 FTS, 6:2 FTS and 8:2 FTS. The results indicate that some toxic PFAS, such as PFOS and PFOA, are still detected in the environment despite being phased out from production and subject to restricted use in the EU and USA for more than two decades. Observation of fluorotelomer sulfonates (4:2 FTS, 6:2 FTS and 8:2 FTS, which are used as alternatives for legacy PFOA and PFOS) in ambient PM_2.5 samples raises a concern about their persistence in the atmosphere and impact on human health considering emerging evidence that they could have similar health endpoints as PFOA and PFOS. To our knowledge, this is the first study to identify PFAS in ambient PM_2.5 at urban locations in Ireland and also the first study to detect 4:2 and 8:2 fluorotelomer sulfonates in atmospheric aerosol particles.

Detection methods for sub-nanogram level of emerging pollutants - Per and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds has been manufactured for more than five decades and used in different purposes. Among persistent organic pollutants, PFAS are toxic, bioaccumulative in humans, wildlife, and global environment. As per environmental protection agency (EPA) guidelines, the perfluorooctanoate and perfluorooctane sulfonate permissible limit was 0.07 ng/L in drinking water. When the concentration exceeds the acceptable limit, it has negative consequences for humans. In such a case, PFAS monitoring is critical, and a quick detection technique are highly needed. Health departments and regulatory agencies have interests in monitoring of PFAS presences and exposures. For the detection of PFAS, numerous highly precise and sensitive chromatographic methods are available. However, the drawbacks of analytical techniques include timely sample preparations and the lack of on-site applicability. As a result, there is an increasing demand for simple sensor systems for monitoring of PFAS in real field samples. In this review, we first describe the sample pre-treatment and analytical techniques for the detection of PFAS. Second, we broadly discussed available sensor system for the quantification of PFAS in different filed samples. Finally, future trends in PFASs sensor are also presented.

Commentary: cumulative risk assessment of perfluoroalkyl carboxylic acids and perfluoralkyl sulfonic acids: what is the scientific support for deriving tolerable exposures by assembling 27 PFAS into 1 common assessment group?

This commentary proposes an approach to risk assessment of mixtures of per- and polyfluorinated alkyl substances (PFAS) as EFSA was tasked to derive a tolerable intake for a group of 27 PFAS. The 27 PFAS to be considered contain different functional groups and have widely variable physicochemical (PC) properties and toxicokinetics and thus should not treated as one group based on regulatory guidance for risk assessment of mixtures. The proposed approach to grouping is to split the 27 PFAS into two groups, perfluoroalkyl carboxylates and perfluoroalkyl sulfonates, and apply a relative potency factor approach (as proposed by RIVM) to obtain two separate group TDIs based on liver toxicity in rodents since liver toxicity is a sensitive response of rodents to PFAS. Short chain PFAS and other PFAS structures should not be included in the groups due to their low potency and rapid elimination. This approach is in better agreement with scientific and regulatory guidance for mixture risk assessment.

Design and qualification of a bench-scale model for municipal waste-to-energy combustion

This paper reports the design and qualification of the first purpose-built, bench-scale reactor system to model the municipal waste-to-energy combustion of fluorinated polymers. Using the principle of similarity, the gas-phase combustion zone of a typical municipal waste-to-energy plant has been scaled down to the bench with a focus on chemical similarity. Chemical similarity is achieved in large part through the use of methanol as a surrogate for municipal solid waste (MSW). Review of prior research shows that methanol is one of the major volatile products expected during MSW thermal conversion in the fuel bed of waste-to-energy plants. Like full-scale waste-energy plants, the design of the bench-scale model includes a flame zone and a post-flame zone. Maintaining steady methanol vapor flow premixed with air to the model reactor system ensures stable combustion resulting in bench-scale CO emission levels comparable to those of full-scale waste-to-energy plants. Since investigation of fluorinated polymer combustion includes trace analysis of exhaust gas for perfluorooctanoic acid (PFOA), qualification testing focused on PFOA collection efficiency. High PFOA collection efficiency (>90%) demonstrated the capability of the reactor system in transporting and absorbing PFOA that may be generated during high-temperature combustion testing of fluorinated polymers. Overall, the bench-scale system is qualified for its intended use to investigate potential generation of PFOA from combustion of fluorinated polymers under conditions representative of waste-to-energy combustion.Implications: Decision-makers depend on environmental researchers to provide reliable predictions of pollutant emissions from waste combustion of polymers at end of product life. Reliable predictions are especially important with regard to questions about potential PFOA emissions from municipal waste combustion of fluorinated polymers. Results from qualification testing confirm that the novel bench-scale model reactor system is capable of representing gas-phase municipal waste combustion behavior upstream of air pollution control and generating representative exhaust gas samples for off-line trace-level analysis of PFOA.

Nano-enabled sensing of per-/poly-fluoroalkyl substances (PFAS) from aqueous systems - A review

Per-/poly-fluoroalkyl substances (PFAS) are an emerging class of environmental contaminants used as an additive across various commodity and fire-retardant products, for their unique thermo-chemical stability, and to alter their surface properties towards selective liquid repellence. These properties also make PFAS highly persistent and mobile across various environmental compartments, leading to bioaccumulation, and causing acute ecotoxicity at all trophic levels particularly to human populations, thus increasing the need for monitoring at their repositories or usage sites. In this review, current nano-enabled methods towards PFAS sensing and its monitoring in wastewater are critically discussed and benchmarked against conventional detection methods. The discussion correlates the materials' properties to the sensitivity, responsiveness, and reproducibility of the sensing performance for nano-enabled sensors in currently explored electrochemical, spectrophotometric, colorimetric, optical, fluorometric, and biochemical with limits of detection of 1.02 × 10^-6 μg/L, 2.8 μg/L, 1 μg/L, 0.13 μg/L, 6.0 × 10^-5 μg/L, and 4.141 × 10^-7 μg/L respectively. The cost-effectiveness of sensing platforms plays an important role in the on-site analysis success and upscalability of nano-enabled sensors. Environmental monitoring of PFAS is a step closer to PFAS remediation. Electrochemical and biosensing methods have proven to be the most reliable tools for future PFAS sensing endeavors with very promising detection limits in an aqueous matrix, short detection times, and ease of fabrication.

Recent advances in mass spectrometry analytical techniques for per- and polyfluoroalkyl substances (PFAS)

The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in various environments has led to increasing concern, and these chemicals have been confirmed as global contaminants. Following the chemical regulatory restrictions imposed, PFAS alternatives that are presumed to be less toxic have been manufactured to replace the traditional ones in the market. However, owing to the original release and alternative usage, continuous accumulation of PFAS has been reported in environmental and human samples, with uncertain consequences for ecosystem and human health. It is crucial to promote and improve existing analytical techniques to facilitate the detection of trace amounts of PFAS in diverse environmental matrices. This review summarizes analytical methods that have been applied to and advanced for targeted detection and suspect screening of PFAS, which mainly include (i) sampling and sample preparation methods for various environment matrices and organisms, and quality assurance/quality control during the analysis process, and (ii) quantitative methods for targeted analysis and automated suspect screening strategies for non-targeted PFAS analysis, together with their applications, advantages, shortcomings, and need for new method development.

Concentration profiles of per- and polyfluoroalkyl substances in major sources to the environment

A review of published literature was conducted to present the concentrations and composition profiles of per- and polyfluoroalkyl substances (PFAS) from significant sources to the environment. The major sources of PFAS to the environment are categorized under direct and indirect sources. The characteristic compounds and concentrations are summarized as found from direct sources such as manufacturing facilities, aqueous film-forming foam (AFFF) applications, metal coating operations, and textile and paper coating operations; and from indirect sources such as landfills and wastewater treatment plants (WWTPs). The major findings are: 1) among the aqueous matrices for which data were reviewed, groundwater impacted by AFFF contamination showed the highest median concentrations for both perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), while the second-highest median concentrations were associated with landfill leachates for PFOA and metal-plating sources for PFOS; 2) many of the unknown polyfluorinated precursors present in AFFF-impacted sites could potentially convert to persistent PFAS by abiotic or biotic transformation, and therefore could act as the long-term source of contamination to the environment; 3) part per billion (ppb) concentrations of PFAS were detected in water bodies surrounding fluorochemical manufacturing plants; 4) in consumer products such as textile, paper, and personal care products, PFOA concentrations were an order of magnitude higher compared to other PFAS; 5) biotransformation products such as fluorotelomer carboxylic acids (FTCAs) and perfluoroalkyl acids (PFAAs) are detected in landfill leachates and WWTP effluents; and 6) many studies have shown increased PFAA concentrations in WWTP effluents compared to influents. This work provides a comprehensive review of the literature on the PFAS concentration and composition trends of select non-polymeric PFAS in different sources.

Evaluation of per- and poly-fluorinated alkyl substances (PFAS) in livers of bottlenose dolphins (Tursiops truncatus) found stranded along the northern Adriatic Sea

Per-and poly-fluorinated alkyl substances (PFAS) are a group of chemicals used in a wide variety of commercial products and industrial applications. These chemicals are persistent, can accumulate in humans' and animals' tissues and in the environment, representing an increasing concern due to their moderate to highly toxicity. Their global distribution, persistence and toxicity led to an urgent need to investigate bioaccumulation also in marine species. In 2013 PFAS contamination was detected in a vast area in Veneto region, mainly in Adige and Brenta rivers. In order to investigate any relevant presence of these substances in marine vertebrates constantly living in the area, PFAS were measured in hepatic tissue samples of 20 bottlenose dolphins (Tursiops truncatus) stranded along the northern Adriatic Sea coastline between 2008 and 2020. Using high performance liquid chromatography-mass spectrometry, 17 target PFAS (PFBA, PFPeA, PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA, PFTrDA, PFTeDA, PFBS, PFHxS, PFOS, PFDS, PFHpS, PFPeS), were quantified in the samples. PFAS profiles were generally composed of the same five dominant PFAS (PFOS > PFUnA > PFDA ≈ PFDoA ≈ PFTrDA). The greatest PFOS concentration found was 629,73 ng/g wet weight, and PFOS accounted until 71% in the PFAS profiles. No significant differences between sexes were found, while calves showing higher mean values than adults, possibly indicating an increasing ability in the elimination of PFAS with age. Finally, a temporal analysis was carried out considering three different periods of time, but no temporal differences in concentrations were found. The results suggest that long-chain PFAS are widespread in bottlenose dolphins along the North Adriatic Sea. Furthermore, they represent a baseline to investigate the impact of PFAS on marine mammals' conservation and health. Filling an important gap in the knowledge of PFAS accumulation in bottlenose dolphins, this study highlights the relevant role of Environmental and Tissue Banks for retrospective analyses on emergent contaminants.

Simultaneous analysis of neutral and ionizable per- and polyfluoroalkyl substances in air

A new method is preliminarily validated for the simultaneous analysis of ionic and neutral per- and polyfluoroalkyl substances (PFASs) in both particulate and gaseous phases in air using a nanosampler-20 air sampler (NS20) composed of quartz fiber filters (QFFs), polyurethane foam (PUF) and artificial activated charcoal (GAIAC™). Perfluoroalkane sulfonamido ethanols (FOSEs) mainly remained in PUF, whereas the other neutral analytes were mainly found in GAIAC. Satisfactory recoveries were obtained for FOSEs, fluorotelomer alcohols (FTOHs), fluorotelomer iodides (FTIs), ranging fron 70%-120%, moderate recoveries were achieved for perfluorinated iodine alkanes (FIAs) and diiodofluoroalkanes (FDIAs), ranging from 50%-70%, while poor recoveries were found for perfluoroalkane sulfonamides (FOSAs). Breakthrough experiments revealed that almost all the target analytes were well trapped in GAIAC™, including the very volatile 4:2 FTOH. Applying to real sampling, our results showed that 6:2 and 8:2 FTOH were the most abundant species, with levels detected at 190 pg/m³ and 160 pg/m³. To the best of our knowledge, FDIAs were detected in ambient air for the first time at an average level of 8.3 pg/m³. Overall, the profiles observed from the real air samples reflected current industrial transition from longer chain to shorter chain in PFAS production. Our results revealed that the current method is promising for a more comprehensive understanding on the fates of PFASs in air.

Light-Induced Advanced Oxidation Processes as PFAS Remediation Methods: A Review

PFAS substances, which have been under investigation in recent years, are certainly some of the most critical emerging contaminants. Their presence in drinking water, correlated with diseases, is consistently being confirmed by scientific studies in the academic and health sectors. With the aim of developing new technologies to mitigate the water contamination problem, research activity based on advanced oxidation processes for PFAS dealkylation and subsequent mineralization is active. While UV radiation could be directly employed for decontamination, there are nevertheless considerable problems regarding its use, even from a large-scale perspective. In contrast, the use of cheap, robust, and green photocatalytic materials active under near UV-visible radiation shows interesting prospects. In this paper we take stock of the health problems related to PFAS, and then provide an update on strategies based on the use of photocatalysts and the latest findings regarding reaction mechanisms. Finally, we detail some brief considerations in relation to the economic aspects of possible solutions.

Occurrence of perfluorinated carboxylic acids in Mexico City's wastewater: A monitoring study in the sewerage and a mega wastewater treatment plant

An analytical method based on liquid chromatography coupled to mass spectrometry was validated to quantify five perfluorinated carboxylic acids (PFCA) namely, perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), and perfluoroundecanoic acid (PFUnA), in wastewater produced in a megacity. Sampling was performed on a monthly basis, obtaining samples from the undergrounded sewerage system and the main open-air canal transporting wastewater out the city. Steady levels of the sum of the target PFCA (ƩPFCA) were determined on both sites through the study: 419.4 ± 24.3 ng L^-1 in undergrounded sewage and 591.1 ± 39 ng L^-1 in the open-air canal. Short-chain PFCA (PFBA, PFHxA, and PFHpA) were abundant, while concentrations of PFOA and PFUnA remained lower in both sampling sites. The open-air canal was transected in four sampling points, which were sampled throughout the monitoring campaign, finding that furtive discharges of municipal and industrial wastewater increased the levels of short-chain PFCA, while those of PFOA and PFUnA were depleted. Relevant concentrations of PFBA (176.9 ± 3.3 ng L^-1), PFHxA (133.4 ± 2.5 ng L^-1), PFHpA (116.6 ± 3.9 ng L^-1), PFOA (133.1 ± 3.5 ng L^-1), and PFUnA (23.5 ± 6.5 ng L^-1) were found 60 km downstream, where the wastewater transported by the open-air canal is used in irrigation. A fraction of sewage is treated in a conventional wastewater treatment plant. The concentration of short-chain PFCA increased in effluent, adding extra loads of PFBA, PFHxA, and PFHpA to the environment.

Tissue-specific distribution of legacy and novel per- and polyfluoroalkyl substances in juvenile seabirds

Of the thousands of per- and polyfluoroalkyl substances (PFAS) in the environment, few have been investigated in detail. In this study, we analyzed 36 legacy and emerging PFAS in multiple seabird tissues collected from individuals from Massachusetts Bay, Narragansett Bay and the Cape Fear River Estuary. PFOS was the dominant compound across multiple tissues, while long-chain perfluorinated carboxylic acids (PFCAs) dominated in brain (mean = 44% of total concentrations). Emerging perfluoroalkyl ether acids (PFEAs)-Nafion byproduct-2 and PFO5DoDA - were detected in greater than 90% of tissues in birds obtained from a nesting region downstream from a major fluorochemical production site. Compound ratios, relative body burden calculations, and electrostatic surface potential calculations were used to describe partitioning behavior of PFEAs in different tissues. Novel PFEAs preferentially partition into blood compared to liver, and were documented in brain for the first time. PFO5DoDA showed a reduced preference for brain compared to PFCAs and Nafion BP2. These results suggest future monitoring efforts and toxicological studies should focus on novel PFAS and long-chain PFCAs in multiple tissues beyond liver and blood, while exploring the unique binding mechanisms driving uptake of multi-ether PFEAs.

Recent progress in the detection of emerging contaminants PFASs

As an emerging contaminant, per- and polyfluoroalkyl substances (PFASs) make up a large group of persistent anthropogenic chemicals, which are difficult to degrade in the environment. Notwithstanding their wide range of applications in consumer products and industrial processes, PFASs have been detected in the environment as well as in human body. Due to their potential adverse human health effects, the U.S. Environmental Protection Agency (EPA) set the combined concentration of PFOA and PFOS in drinking water at 70 ng/L or 70 ppt (parts per trillion) as a lifetime health advisory level. Current standard detection methods for PFASs heavily rely on chromatographic techniques coupled with mass spectrometry. Although these methods provide accurate, specific, and sensitive measurements, their applications are greatly limited in advanced analytical laboratories because it necessitates expensive instrumentations, professional operators, complicated sample pretreatment, and considerable analysis time. Therefore, other detection methods beyond chromatographic based techniques, such as optical and electrochemical techniques, have also been extensively explored for simple, accessible, inexpensive, rapid, and sensitive detection of PFASs, particularly PFOA and PFOS. The purpose of this review is to provide recent progress in alternative detection platforms relying on non-MS based techniques for PFASs analysis. Starting with a brief introduction about the importance of monitoring PFASs, recent advances in various PFASs detection methods are grouped and discussed based on the difference of signals, with an emphasis on the working principles of different techniques, the sensing mechanism, and the sensing performance. The review is closed with the conclusion and discussion of future trends.

A Critical Review of a Recommended Analytical and Classification Approach for Organic Fluorinated Compounds with an Emphasis on Per- and Polyfluoroalkyl Substances

Organic fluorinated compounds have been detected in various environmental media and biota. Some of these compounds are regulated locally (e.g., perfluorononanoic acid maximum contaminant level in drinking water by the New Jersey Dept. of Environmental Protection), nationally (e.g., perfluorooctanoic acid maximum acceptable concentration in drinking water by Health Canada), or internationally (e.g., Stockholm Convention on Persistent Organic Pollutants). Globally, regulators and researchers seek to identify the organic fluorinated compounds associated with potential adverse effects, bioaccumulation, mobility, and persistence to manage their risks, and, to understand the beneficial attributes they bring to products such as first responder gear, etc. Clarity is needed to determine the best analytical method for the goal of the analyses (e.g., pure research or analysis to determine the extent of an accidental release, monitoring groundwater for specific compounds to determine regulatory compliance, and establish baseline levels in a river of organic fluorinated substances associated with human health risk prior to a clean-up effort). Analytical techniques that identify organic fluorine coupled together with targeted chemical analysis will yield information sufficient to identify public health or environmental hazards. Integr Environ Assess Manag 2021;17:331-351. © 2020. W.L. Gore & Associates Inc. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Species- and Tissue-Specific Avian Chronic Toxicity Values for Perfluorooctane Sulfonate (PFOS) and a Binary Mixture of PFOS and Perfluorohexane Sulfonate

To further characterize avian toxicity to environmental levels of select per- and poly-fluoroalkyl substances (PFAS), we established species- and tissue-specific PFAS chronic toxicity values (CTVs) associated with a lowest-observable-adverse effect level (LOAEL) threshold previously established for northern bobwhite quail (Colinus virginianus) chronically orally exposed via drinking water to either perfluorooctane sulfonate (PFOS) or a simple PFAS mixture. Aided by advances in analytical techniques, the novel avian oral PFAS CTVs reported in the present study are lower than the previously reported toxicity reference values (TRVs) estimated for birds chronically exposed via feed. Thus, current avian PFOS TRVs may not be fully protective of wild avian populations at PFAS-impacted sites. Also, likely due to differences in bioavailability, bioaccessibility, and toxicokinetics among individual PFAS between oral exposure types, we found higher bioaccumulation factors in all assessed tissues from birds exposed via water versus feed. Thus, we propose that future characterization of chemical toxicity due to ingestion exposure initially include a full examination of all probable sources of oral exposure for the most accurate derivation of TRVs and a more complete picture of ecological risk. The avian PFAS LOAEL CTVs established in the present study can be modified with the use of uncertainty factors to derive site-specific avian TRVs for ecological risk assessment at PFAS-impacted sites. From differences observed in the behavior of PFOS when administered as either a single chemical or part of a binary mixture with perfluorohexane sulfonate (PFHxS), we verified that PFOS was absorbed and distributed differently when coadministered with PFHxS and that PFOS likely interacted with PFHxS differently among tissues, helping to explain the differences observed in avian toxicity between exposures. Environ Toxicol Chem 2021;40:899-909. © 2020 SETAC.

Screening for 32 per- and polyfluoroalkyl substances (PFAS) including GenX in sludges from 43 WWTPs located in the Czech Republic - Evaluation of potential accumulation in vegetables after application of biosolids

Highly persistent, toxic and bioaccumulative per - and polyfluoroalkyl substances (PFAS) represents a serious problem for the environment and their concentrations and fate remain largely unknown. The present study consists of a PFAS screening in sludges originating from 43 wastewater treatment plants (WWTPs) in the Czech Republic. To analyze an extended group of PFAS consisting of 32 PFAS, including GenX and other new replacements of older and restricted PFAS in sludge, a new method was optimized and validated using pressurized solvent extraction, followed by the SPE clean-up step to eliminate the observed matrix effects and LC-MS/MS. The results revealed high PFAS contamination of sewage sludge, reaching values from 5.6 to 963.2 ng g^-1. The results showed that in the majority of the samples (about 60%), PFOS was the most abundant among the targeted PFAS, reaching 932.9 ng g^-1. Approximately 20% of the analyzed samples contained more short-chain PFAS, suggesting the replacement of long-chain PFAS (especially restricted PFOA and PFOS). GenX was detected in 9 samples, confirming the trend in the use of new PFAS. The results revealed that significantly higher contamination was detected in the samples from large WWTPs (population equivalent > 50,000; p-value <0.05). Concerning the application of sludge in agriculture, our prediction using the respective PFAS bioconcentration factors, the observed concentrations, and the legislatively permitted management of biosolids in Czech Republic agriculture revealed that PFAS can cause serious contamination of cereals and vegetables (oat, celery shoots and lettuce leaves), as well as general secondary contamination of the environment.

Simultaneous determination of seven perfluoroalkyl carboxylic acids in water samples by 2,3,4,5,6-pentafluorobenzyl bromide derivatization and gas chromatography-mass spectrometry

A new derivatization reagent, 2,3,4,5,6-pentafluorobenzyl bromide (PFBBr), was employed to determine seven perfluoroalkyl carboxylic acids (PFCAs) simultaneously in tap water with gas chromatography-mass spectrometry (GC-MS) technique in this study. Firstly, seven PFCAs were derivatized to their corresponding esters under alkaline condition. The derivatization conditions including the amount of PFBBr and K₂CO₃, derivatization temperature and time were optimized to increase the derivatization efficiency. The 14 tap water samples collected from different places of China were enriched and purified through solid phase extraction pretreatment. The limits of detection (LODs) and the limits of quantitation (LOQs) ranged from 0.1 ng/L to 0.28 ng/L and from 0.3 ng/L to 0.84 ng/L, respectively. The new method offers a linear relationship in the range from 2 ng/L to 2000 ng/L, and the correlation coefficients ranged from 0.9938 to 0.9994. The results showed that GC-MS combined with pre-column derivatization is a reliable method for the analysis of PFCAs in the aqueous environment.

A rapid and simple method to quantify per- and polyfluoroalkyl substances (PFAS) in plasma and serum using 96-well plates

Per- and polyfluoroalkyl substances (PFAS) are synthetic organic compounds that over the past several years, have witnessed a dramatic increase in scientific attention. As PFAS are predominantly accumulated in plasma, monitoring individual burden levels in plasma are typically achieved via some combination of protein precipitation and/or solid phase extraction (SPE), either in online or offline modes. This work describes an updated PFAS extraction workflow, using 96-well plate technology and protein precipitation that is rapid, simple, inexpensive, and amenable for large cohort studies. In brief, plasma proteins were precipitated using methanol and the resulting centrifuged supernatant was directly analyzed using UHPLC-MS/MS. We monitored 51 PFAS, which were quantified via isotope dilution and the effectiveness of the method was demonstrated by using NIST blood-based Standard Reference Materials (SRMs). This method resulted in recoveries ranging between 70 and 89% for all analytes. The 96-well design exhibited low limits of detection and only required sample volumes of 100 µL, thus resulting in an amenable method for high-throughput plasma/serum PFAS screening.

• PFAS were directly quantified in plasma and serum samples;

• No SPE needed after protein precipitation;

• SRMs can be used to validate PFAS measurement in plasma/serum.

Review on perfluoroalkyl and polyfluoroalkyl substances (PFASs) in the Chinese atmospheric environment

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been manufactured and used for over 50 years, and now are worldwide distributed in the environment. The atmospheric environment is the main compartment for PFASs to be transported and transformed, and relevant research has highlighted the global occurrence and impacts of atmospheric PFASs in ecosystems and human health. With the phasing-out and restriction of eight‑carbon chain-length (C8) PFASs in developed countries, China has become the largest producer of C8 PFASs since 2004. Subsequently, a number of studies on PFASs in the Chinese atmospheric environment have been conducted in the recent decade. This review documented twenty-eight studies on PFASs in Chinese outdoor air published to date. Methods of sampling, extraction, cleanup, and instrumental analysis were summarized for both ionic and neutral PFASs. Levels, compositions, and spatial distribution of PFASs from different areas in China (i.e. source, urban, and remote regions, and north versus south China) were compared and discussed. Leaves and tree barks were proposed as effective bioindicators to reflect the contamination status of atmospheric PFASs. Special attention can be given to non-target screening for future research directions.

Risk to human health related to the presence of perfluoroalkyl substances in food

The European Commission asked EFSA for a scientific evaluation on the risks to human health related to the presence of perfluoroalkyl substances (PFASs) in food. Based on several similar effects in animals, toxicokinetics and observed concentrations in human blood, the CONTAM Panel decided to perform the assessment for the sum of four PFASs: PFOA, PFNA, PFHxS and PFOS. These made up half of the lower bound (LB) exposure to those PFASs with available occurrence data, the remaining contribution being primarily from PFASs with short half-lives. Equal potencies were assumed for the four PFASs included in the assessment. The mean LB exposure in adolescents and adult age groups ranged from 3 to 22, the 95th percentile from 9 to 70 ng/kg body weight (bw) per week. Toddlers and 'other children' showed a twofold higher exposure. Upper bound exposure was 4- to 49-fold higher than LB levels, but the latter were considered more reliable. 'Fish meat', 'Fruit and fruit products' and 'Eggs and egg products' contributed most to the exposure. Based on available studies in animals and humans, effects on the immune system were considered the most critical for the risk assessment. From a human study, a lowest BMDL 10 of 17.5 ng/mL for the sum of the four PFASs in serum was identified for 1-year-old children. Using PBPK modelling, this serum level of 17.5 ng/mL in children was estimated to correspond to long-term maternal exposure of 0.63 ng/kg bw per day. Since accumulation over time is important, a tolerable weekly intake (TWI) of 4.4 ng/kg bw per week was established. This TWI also protects against other potential adverse effects observed in humans. Based on the estimated LB exposure, but also reported serum levels, the CONTAM Panel concluded that parts of the European population exceed this TWI, which is of concern.

Recent Developments of PFAS-Detecting Sensors and Future Direction: A Review

Per- and poly-fluoroalkyl substances (PFASs) have recently been labeled as toxic constituents that exist in many aqueous environments. However, traditional methods used to determine the level of PFASs are often not appropriate for continuous environmental monitoring and management. Based on the current state of research, PFAS-detecting sensors have surfaced as a promising method of determination. These sensors are an innovative solution with characteristics that allow for in situ, low-cost, and easy-to-use capabilities. This paper presents a comprehensive review of the recent developments in PFAS-detecting sensors, and why the literature on determination methods has shifted in this direction compared to the traditional methods used. PFAS-detecting sensors discussed herein are primarily categorized in terms of the detection mechanism used. The topics covered also include the current limitations, as well as insight on the future direction of PFAS analyses. This paper is expected to be useful for the smart sensing technology development of PFAS detection methods and the associated environmental management best practices in smart cities of the future.

Mixed organic and inorganic tapwater exposures and potential effects in greater Chicago area, USA

Safe drinking water at the point of use (tapwater, TW) is a public-health priority. TW exposures and potential human-health concerns of 540 organics and 35 inorganics were assessed in 45 Chicago-area United States (US) homes in 2017. No US Environmental Protection Agency (EPA) enforceable Maximum Contaminant Level(s) (MCL) were exceeded in any residential or water treatment plant (WTP) pre-distribution TW sample. Ninety percent (90%) of organic analytes were not detected in treated TW, emphasizing the high quality of the Lake Michigan drinking-water source and the efficacy of the drinking-water treatment and monitoring. Sixteen (16) organics were detected in >25% of TW samples, with about 50 detected at least once. Low-level TW exposures to unregulated disinfection byproducts (DBP) of emerging concern, per/polyfluoroalkyl substances (PFAS), and three pesticides were ubiquitous. Common exceedances of non-enforceable EPA MCL Goal(s) (MCLG) of zero for arsenic [As], lead [Pb], uranium [U], bromodichloromethane, and tribromomethane suggest potential human-health concerns and emphasize the continuing need for improved understanding of cumulative effects of low-concentration mixtures on vulnerable sub-populations. Because DBP dominated TW organics, residential-TW concentrations are potentially predictable with expanded pre-distribution DBP monitoring. However, several TW chemicals, notably Pb and several infrequently detected organic compounds, were not readily explained by pre-distribution samples, illustrating the need for continued broad inorganic/organic TW characterization to support consumer assessment of acceptable risk and point-of-use treatment options.

Mixed organic and inorganic tapwater exposures and potential effects in greater Chicago area, USA

Safe drinking water at the point of use (tapwater, TW) is a public-health priority. TW exposures and potential human-health concerns of 540 organics and 35 inorganics were assessed in 45 Chicago-area United States (US) homes in 2017. No US Environmental Protection Agency (EPA) enforceable Maximum Contaminant Level(s) (MCL) were exceeded in any residential or water treatment plant (WTP) pre-distribution TW sample. Ninety percent (90%) of organic analytes were not detected in treated TW, emphasizing the high quality of the Lake Michigan drinking-water source and the efficacy of the drinking-water treatment and monitoring. Sixteen (16) organics were detected in >25% of TW samples, with about 50 detected at least once. Low-level TW exposures to unregulated disinfection byproducts (DBP) of emerging concern, per/polyfluoroalkyl substances (PFAS), and three pesticides were ubiquitous. Common exceedances of non-enforceable EPA MCL Goal(s) (MCLG) of zero for arsenic [As], lead [Pb], uranium [U], bromodichloromethane, and tribromomethane suggest potential human-health concerns and emphasize the continuing need for improved understanding of cumulative effects of low-concentration mixtures on vulnerable sub-populations. Because DBP dominated TW organics, residential-TW concentrations are potentially predictable with expanded pre-distribution DBP monitoring. However, several TW chemicals, notably Pb and several infrequently detected organic compounds, were not readily explained by pre-distribution samples, illustrating the need for continued broad inorganic/organic TW characterization to support consumer assessment of acceptable risk and point-of-use treatment options.

Fluorine Mass Balance and Suspect Screening in Marine Mammals from the Northern Hemisphere

There is increasing evidence that the ∼20 routinely monitored perfluoroalkyl and polyfluoroalkyl substances (PFASs) account for only a fraction of extractable organofluorine (EOF) occurring in the environment. To assess whether PFAS exposure is being underestimated in marine mammals from the Northern Hemisphere, we performed a fluorine mass balance on liver tissues from 11 different species using a combination of targeted PFAS analysis, EOF and total fluorine determination, and suspect screening. Samples were obtained from the east coast United States (US), west and east coast of Greenland, Iceland, and Sweden from 2000 to 2017. Of the 36 target PFASs, perfluorooctane sulfonate (PFOS) dominated in all but one Icelandic and three US samples, where the 7:3 fluorotelomer carboxylic acid (7:3 FTCA) was prevalent. This is the first report of 7:3 FTCA in polar bears (∼1000 ng/g, ww) and cetaceans (<6-190 ng/g, ww). In 18 out of 25 samples, EOF was not significantly greater than fluorine concentrations derived from sum target PFASs. For the remaining 7 samples (mostly from the US east coast), 30-75% of the EOF was unidentified. Suspect screening revealed an additional 37 PFASs (not included in the targeted analysis) bringing the total to 63 detected PFASs from 12 different classes. Overall, these results highlight the importance of a multiplatform approach for accurately characterizing PFAS exposure in marine mammals.

Fluorine Mass Balance and Suspect Screening in Marine Mammals from the Northern Hemisphere

There is increasing evidence that the ∼20 routinely monitored perfluoroalkyl and polyfluoroalkyl substances (PFASs) account for only a fraction of extractable organofluorine (EOF) occurring in the environment. To assess whether PFAS exposure is being underestimated in marine mammals from the Northern Hemisphere, we performed a fluorine mass balance on liver tissues from 11 different species using a combination of targeted PFAS analysis, EOF and total fluorine determination, and suspect screening. Samples were obtained from the east coast United States (US), west and east coast of Greenland, Iceland, and Sweden from 2000 to 2017. Of the 36 target PFASs, perfluorooctane sulfonate (PFOS) dominated in all but one Icelandic and three US samples, where the 7:3 fluorotelomer carboxylic acid (7:3 FTCA) was prevalent. This is the first report of 7:3 FTCA in polar bears (∼1000 ng/g, ww) and cetaceans (<6-190 ng/g, ww). In 18 out of 25 samples, EOF was not significantly greater than fluorine concentrations derived from sum target PFASs. For the remaining 7 samples (mostly from the US east coast), 30-75% of the EOF was unidentified. Suspect screening revealed an additional 37 PFASs (not included in the targeted analysis) bringing the total to 63 detected PFASs from 12 different classes. Overall, these results highlight the importance of a multiplatform approach for accurately characterizing PFAS exposure in marine mammals.