Preanalytic removal of human DNA eliminates false signals in general 16S rDNA PCR monitoring of bacterial pathogens in blood

Universal Digital High-Resolution Melt Analysis for the Diagnosis of Bacteremia

Fast and accurate diagnosis of bloodstream infection is necessary to inform treatment decisions for septic patients, who face hourly increases in mortality risk. Blood culture remains the gold standard test but typically requires approximately 15 hours to detect the presence of a pathogen. We, therefore, assessed the potential for universal digital high-resolution melt (U-dHRM) analysis to accomplish faster broad-based bacterial detection, load quantification, and species-level identification directly from whole blood. Analytical validation studies demonstrated strong agreement between U-dHRM load measurement and quantitative blood culture, indicating that U-dHRM detection is highly specific to intact organisms. In a pilot clinical study of 17 whole blood samples from pediatric patients undergoing simultaneous blood culture testing, U-dHRM achieved 100% concordance when compared with blood culture and 88% concordance when compared with clinical adjudication. Moreover, U-dHRM identified the causative pathogen to the species level in all cases where the organism was represented in the melt curve database. These results were achieved with a 1-mL sample input and sample-to-answer time of 6 hours. Overall, this pilot study suggests that U-dHRM may be a promising method to address the challenges of quickly and accurately diagnosing a bloodstream infection.

Saponin treatment for eukaryotic DNA depletion alters the microbial DNA profiles by reducing the abundance of Gram-negative bacteria in metagenomics analyses

Background: Recent advances in microbiome sequencing techniques have provided new insights into the role of the microbiome on human health with potential diagnostic implications. However, these developments are often hampered by the presence of a large amount of human DNA interfering with the analysis of the bacterial content. Nowadays, extensive scientific literature focuses on eukaryotic DNA depletion methods, which successfully remove host DNA in microbiome studies, even if a precise assessment of the impact on bacterial DNA is often missing. Methods: Here, we have investigated a saponin-based DNA isolation protocol commonly applied to different biological matrices to deplete the released host DNA. Results: The bacterial DNA obtained was used to assess the relative abundance of bacterial and human DNA, revealing that the inclusion of 2.5% wt/vol saponin allowed the depletion of most of the host's DNA in favor of bacterial DNA enrichment. However, shotgun metagenomic sequencing showed inaccurate microbial profiles of the DNA samples, highlighting an erroneous increase in Gram-positive DNA. Even the application of 0.0125% wt/vol saponin altered the bacterial profile by depleting Gram-negative bacteria, resulting in an overall increase of Gram-positive bacterial DNA. Conclusion: The application of the saponin-based protocol drastically changes the detection of the microbial composition of human-related biological specimens. In this context, we revealed that saponin targets not only host cells but also specific bacterial cells, thus inducing a drastic reduction in the profiling of Gram-negative bacterial DNA.

Direct 16S/18S rRNA Gene PCR Followed by Sanger Sequencing as a Clinical Diagnostic Tool for Detection of Bacterial and Fungal Infections: a Systematic Review and Meta-Analysis

rRNA gene Sanger sequencing is being used for the identification of cultured pathogens. A new diagnostic approach is sequencing of uncultured samples by using the commercial DNA extraction and sequencing platform SepsiTest (ST). The goal was to analyze the clinical performance of ST with a focus on nongrowing pathogens and the impact on antibiotic therapy. A literature search used PubMed/Medline, Cochrane, Science Direct, and Google Scholar. Eligibility followed PRISMA-P criteria. Quality and risk of bias were assessed drawing on QUADAS-2 (quality assessment of diagnostic accuracy studies, revised) criteria. Meta-analyses were performed regarding accuracy metrics compared to standard references and the added value of ST in terms of extra found pathogens. We identified 25 studies on sepsis, infectious endocarditis, bacterial meningitis, joint infections, pyomyositis, and various diseases from routine diagnosis. Patients with suspected infections of purportedly sterile body sites originated from various hospital wards. The overall sensitivity (79%; 95% confidence interval [CI], 73 to 84%) and specificity (83%; 95% CI, 72 to 90%) were accompanied by large effect sizes. ST-related positivity was 32% (95% CI, 30 to 34%), which was significantly higher than the culture positivity (20%; 95% CI, 18 to 22%). The overall added value of ST was 14% (95% CI, 10 to 20%) for all samples. With 130 relevant taxa, ST uncovered high microbial richness. Four studies demonstrated changes of antibiotic treatment at 12% (95% CI, 9 to 15%) of all patients upon availability of ST results. ST appears to be an approach for the diagnosis of nongrowing pathogens. The potential clinical role of this agnostic molecular diagnostic tool is discussed regarding changes of antibiotic treatment in cases where culture stays negative.

Universal digital high resolution melt analysis for the diagnosis of bacteremia

Fast and accurate diagnosis of bloodstream infection is necessary to inform treatment decisions for septic patients, who face hourly increases in mortality risk. Blood culture remains the gold standard test but typically requires ∼15 hours to detect the presence of a pathogen. Here, we assess the potential for universal digital high-resolution melt (U-dHRM) analysis to accomplish faster broad-based bacterial detection, load quantification, and species-level identification directly from whole blood. Analytical validation studies demonstrated strong agreement between U-dHRM load measurement and quantitative blood culture, indicating that U-dHRM detection is highly specific to intact organisms. In a pilot clinical study of 21 whole blood samples from pediatric patients undergoing simultaneous blood culture testing, U-dHRM achieved 100% concordance when compared with blood culture and 90.5% concordance when compared with clinical adjudication. Moreover, U-dHRM identified the causative pathogen to the species level in all cases where the organism was represented in the melt curve database. These results were achieved with a 1 mL sample input and sample-to-answer time of 6 hrs. Overall, this pilot study suggests that U-dHRM may be a promising method to address the challenges of quickly and accurately diagnosing a bloodstream infection.

Universal digital high resolution melt analysis for the diagnosis of bacteremia

April Aralar, Tyler Goshia, Nanda Ramchandar, Shelley M. Lawrence, Aparajita Karmakar, Ankit Sharma, Mridu Sinha, David Pride, Peiting Kuo, Khrissa Lecrone, Megan Chiu, Karen Mestan, Eniko Sajti, Michelle Vanderpool, Sarah Lazar, Melanie Crabtree, Yordanos Tesfai, Stephanie I. Fraley.

Highly specific and sensitive detection of Burkholderia pseudomallei genomic DNA by CRISPR-Cas12a

Detection of Burkholderia pseudomallei, a causative bacterium for melioidosis, remains a challenging undertaking due to long assay time, laboratory requirements, and the lack of specificity and sensitivity of many current assays. In this study, we are presenting a novel method that circumvents those issues by utilizing CRISPR-Cas12a coupled with isothermal amplification to identify B. pseudomallei DNA from clinical isolates. Through in silico search for conserved CRISPR-Cas12a target sites, we engineered the CRISPR-Cas12a to contain a highly specific spacer to B. pseudomallei, named crBP34. The crBP34-based detection assay can detect as few as 40 copies of B. pseudomallei genomic DNA while discriminating against other tested common pathogens. When coupled with a lateral flow dipstick, the assay readout can be simply performed without the loss of sensitivity and does not require expensive equipment. This crBP34-based detection assay provides high sensitivity, specificity and simple detection method for B. pseudomallei DNA. Direct use of this assay on clinical samples may require further optimization as these samples are complexed with high level of human DNA.

Melioidosis is a fatal infectious disease caused by a Gram-negative bacterium called Burkholderia pseudomallei. The bacteria can be found in many parts of the world, especially in the tropical and subtropical regions. Infection displays a variety of symptoms such as pneumonia, organ abscess and septicemia. The latter can lead to death within 24–48 hours if not properly diagnosed and treated. Rapid and accurate diagnosis, consequently, are essential for saving patients’ lives. Currently, culturing B. pseudomallei is a gold standard diagnostic method, but the assay turnaround time is 2–4 days, and the result could be of low sensitivity. Other detection methods such as real-time PCR and serological assays are limited by availability of equipment and by low specificity in endemic areas, respectively. For these reasons, in this study we developed a specific, sensitive and rapid detection assay for B. pseudomallei DNA, that is based on CRISPR-Cas12a system. The CRISPR-Cas12a is a protein-RNA complex that recognizes DNA. The RNA can be reprogramed to guide the detection of any DNA of interest, which in our case B. pseudomallei genomic DNA. Our data showed that this assay exhibited a 100% specificity to B. pseudomallei while discriminating against 10 other pathogens and human. The assay can detect B. pseudomallei DNA in less than one hour and does not require sophisticated equipment.

Challenges in the Microbiological Diagnosis of Implant-Associated Infections: A Summary of the Current Knowledge

Implant-associated infections are characterized by microbial biofilm formation on implant surface, which renders the microbiological diagnosis challenging and requires, in the majority of cases, a complete device removal along with a prolonged antimicrobial therapy. Traditional cultures have shown unsatisfactory sensitivity and a significant advance in the field has been represented by both the application of the sonication technique for the detachment of live bacteria from biofilm and the implementation of metabolic and molecular assays. However, despite the recent progresses in the microbiological diagnosis have considerably reduced the rate of culture-negative infections, still their reported incidence is not negligible. Overall, several culture- and non-culture based methods have been developed for diagnosis optimization, which mostly relies on pre-operative and intra-operative (i.e., removed implants and surrounding tissues) samples. This review outlines the principal culture- and non-culture based methods for the diagnosis of the causative agents of implant-associated infections and gives an overview on their application in the clinical practice. Furthermore, advantages and disadvantages of each method are described.

Characterizing Microbiomes via Sequencing of Marker Loci: Techniques To Improve Throughput, Account for Cross-Contamination, and Reduce Cost

New approaches to characterizing microbiomes via high-throughput sequencing provide impressive gains in efficiency and cost reduction compared to approaches that were standard just a few years ago. However, the speed of method development has been such that staying abreast of the latest technological advances is challenging. Moreover, shifting laboratory protocols to include new methods can be expensive and time consuming. To facilitate adoption of new techniques, we provide a guide and review of recent advances that are relevant for single-locus sequence-based study of microbiomes—from extraction to library preparation—including a primer regarding the use of liquid-handling automation in small-scale academic settings. Additionally, we describe several amendments to published techniques to improve throughput, track contamination, and reduce cost. Notably, we suggest adding synthetic DNA molecules to each sample during nucleic acid extraction, thus providing a method of documenting incidences of cross-contamination. We also describe a dual-indexing scheme for Illumina sequencers that allows multiplexing of many thousands of samples with minimal PhiX input. Collectively, the techniques that we describe demonstrate that laboratory technology need not impose strict limitations on the scale of molecular microbial ecology studies.

IMPORTANCE New methods to characterize microbiomes reduce technology-imposed limitations to study design, but many new approaches have not been widely adopted. Here, we present techniques to increase throughput and reduce contamination alongside a thorough review of current best practices.

Performance and Application of 16S rRNA Gene Cycle Sequencing for Routine Identification of Bacteria in the Clinical Microbiology Laboratory

This review provides a state-of-the-art description of the performance of Sanger cycle sequencing of the 16S rRNA gene for routine identification of bacteria in the clinical microbiology laboratory. A detailed description of the technology and current methodology is outlined with a major focus on proper data analyses and interpretation of sequences. The remainder of the article is focused on a comprehensive evaluation of the application of this method for identification of bacterial pathogens based on analyses of 16S multialignment sequences. In particular, the existing limitations of similarity within 16S for genus- and species-level differentiation of clinically relevant pathogens and the lack of sequence data currently available in public databases is highlighted. A multiyear experience is described of a large regional clinical microbiology service with direct 16S broad-range PCR followed by cycle sequencing for direct detection of pathogens in appropriate clinical samples. The ability of proteomics (matrix-assisted desorption ionization-time of flight) versus 16S sequencing for bacterial identification and genotyping is compared. Finally, the potential for whole-genome analysis by next-generation sequencing (NGS) to replace 16S sequencing for routine diagnostic use is presented for several applications, including the barriers that must be overcome to fully implement newer genomic methods in clinical microbiology. A future challenge for large clinical, reference, and research laboratories, as well as for industry, will be the translation of vast amounts of accrued NGS microbial data into convenient algorithm testing schemes for various applications (i.e., microbial identification, genotyping, and metagenomics and microbiome analyses) so that clinically relevant information can be reported to physicians in a format that is understood and actionable. These challenges will not be faced by clinical microbiologists alone but by every scientist involved in a domain where natural diversity of genes and gene sequences plays a critical role in disease, health, pathogenicity, epidemiology, and other aspects of life-forms. Overcoming these challenges will require global multidisciplinary efforts across fields that do not normally interact with the clinical arena to make vast amounts of sequencing data clinically interpretable and actionable at the bedside.

Human and Extracellular DNA Depletion for Metagenomic Analysis of Complex Clinical Infection Samples Yields Optimized Viable Microbiome Profiles

Metagenomic sequencing is a promising approach for identifying and characterizing organisms and their functional characteristics in complex, polymicrobial infections, such as airway infections in people with cystic fibrosis. These analyses are often hampered, however, by overwhelming quantities of human DNA, yielding only a small proportion of microbial reads for analysis. In addition, many abundant microbes in respiratory samples can produce large quantities of extracellular bacterial DNA originating either from biofilms or dead cells. We describe a method for simultaneously depleting DNA from intact human cells and extracellular DNA (human and bacterial) in sputum, using selective lysis of eukaryotic cells and endonuclease digestion. We show that this method increases microbial sequencing depth and, consequently, both the number of taxa detected and coverage of individual genes such as those involved in antibiotic resistance. This finding underscores the substantial impact of DNA from sources other than live bacteria in micro-biological analyses of complex, chronic infection specimens.

Nelson et al. describe a method for reducing both human cellular DNA and extracellular DNA (human and bacterial) in a complex respiratory sample using hypotonic lysis and endonuclease digestion. This method increases effective microbial sequencing depth and minimizes bias introduced into subsequent phylogenetic analysis by bacterial extracellular DNA.

Optimization of 16S rRNA gene analysis for use in the diagnostic clinical microbiology service

Broad-range amplification and sequencing of the 16S rRNA gene, directly from clinical samples, is a method that potentially allows detection of any cultivable or non-cultivable bacteria. However, the method is prone to false positive results due to PCR contamination. Another concern is the human DNA abundance compared to bacterial DNA in samples from sterile sites. Those factors may decrease the sensitivity and specificity of the assay and can complicate the analysis and interpretation of the results. The objective of this prospective study was to try to avoid the most common pitfalls, mentioned above, and develop a molecular 16S assay with a high clinical sensitivity and specificity. Fifty-six consecutive tissue samples from patients with suspected deep infections were extracted by 3 different DNA-extraction methods; two based on a principle of bacterial DNA enrichment, and one conventional DNA extraction method. We compared three primer pairs, including both conventional and DPO principle, targeting different variable regions of the 16S rRNA gene. Results from routine tissue culture were used as reference. Clinical data was recorded from patient charts and analyzed in parallel. Of a total of 56 samples, collected from 39 patients, 70% (39 samples) were assessed as true infections by analysis of clinical data. Bacterial enrichment extraction increased sensitivity from 54% to 72%. The 2 sets of primer pairs defining region V1-V3 and V3-V4, showed similar sensitivity, but DPO-primers resulted in better specificity, i.e. less contaminations. The primer pairs covering V1-V8 show significantly lower sensitivity (p < .001) than V1-V3 and V3-V4. Optimizing extraction protocols and choice of primers can increase the sensitivity and specificity of a molecular 16S-analysis, rendering a valuable complement to tissue culture.

Interfacial Effect-Based Quantification of Droplet Isothermal Nucleic Acid Amplification for Bacterial Infection

Bacterial infection is a widespread problem in humans that can potentially lead to hospitalization and morbidity. The largest obstacle for physicians/clinicians is the time delay in accurately identifying infectious bacteria, especially their sub-species, in order to adequately treat and diagnose such infected patients. Loop-mediated amplification (LAMP) is a nucleic acid amplification method that has been widely used in diagnostic applications due to its simplicity of constant temperature, use of up to 4 to 6 primers (rendering it highly specific), and capability of amplifying low copies of target sequences. Use of interfacial effect-based monitoring is expected to dramatically shorten the time-to-results of nucleic acid amplification techniques. In this work, we developed a LAMP-based point-of-care platform for detection of bacterial infection, utilizing smartphone measurement of contact angle from oil-immersed droplet LAMP reactions. Whole bacteria (Escherichia coli O157:H7) were assayed in buffer as well as 5% diluted human whole blood. Monitoring of droplet LAMP reactions was demonstrated in a three-compartment, isothermal proportional-integrated-derived (PID)-controlled chip. Smartphone-captured images of droplet LAMP reactions, and their contact angles, were evaluated. Contact angle decreased substantially upon target amplification in both buffer and whole blood samples. In comparison, no-target control (NTC) droplets remained stable throughout the 30 min isothermal reactions. These results were explained by the pre-adsorption of plasma proteins to an oil-water interface (lowering contact angle), followed by time-dependent amplicon formation and their preferential adsorption to the plasma protein-occupied oil-water interface. Time-to-results was as fast as 5 min, allowing physicians to quickly make their decision for infected patients. The developed assay demonstrated quantification of bacteria concentration, with a limit-of-detection at 102 CFU/μL for buffer samples, and binary target or no-target identification with a limit-of-detection at 10 CFU/μL for 5% diluted whole blood samples.

Encrustations on ureteral stents from patients without urinary tract infection reveal distinct urotypes and a low bacterial load

BACKGROUND

Current knowledge of the urinary tract microbiome is limited to urine analysis and analysis of biofilms formed on Foley catheters. Bacterial biofilms on ureteral stents have rarely been investigated, and no cultivation-independent data are available on the microbiome of the encrustations on the stents.

RESULTS

The typical encrustations of organic and inorganic urine-derived material, including microbial biofilms formed during 3-6 weeks on ureteral stents in patients treated for kidney and ureteral stones, and without reported urinary tract infection at the time of stent insertion, were analysed. Next-generation sequencing of the 16S rRNA gene V3-V4 region revealed presence of different urotypes, distinct bacterial communities. Analysis of bacterial load was performed by combining quantification of 16S rRNA gene copy numbers by qPCR with microscopy and cultivation-dependent analysis methods, which revealed that ureteral stent biofilms mostly contain low numbers of bacteria. Fluorescence microscopy indicates the presence of extracellular DNA. Bacteria identified in biofilms by microscopy had mostly morphogenic similarities to gram-positive bacteria, in few cases to Lactobacillus and Corynebacterium, while sequencing showed many additional bacterial genera. Weddellite crystals were absent in biofilms of patients with Enterobacterales and Corynebacterium-dominated microbiomes.

CONCLUSIONS

This study provides novel insights into the bacterial burden in ureteral stent encrustations and the urinary tract microbiome. Short-term (3-6 weeks) ureteral stenting is associated with a low load of viable and visible bacteria in ureteral stent encrustations, which may be different from long-term stenting. Patients could be classified according to different urotypes, some of which were dominated by potentially pathogenic species. Facultative pathogens however appear to be a common feature in patients without clinically manifested urinary tract infection.

TRIAL REGISTRATION

ClinicalTrials.gov, NCT02845726 . Registered on 30 June 2016-retrospectively registered.

Characterization of human breast tissue microbiota from core needle biopsies through the analysis of multi hypervariable 16S-rRNA gene regions

Breast microbiota compositions are not well understood, and a few recent reports have begun to explore the correlation between breast tissue dysbiosis and cancer. Given that various methods for breast microbiota detection were used, the aim of the present paper was to clarify which hypervariable region of the 16S-rRNA gene (V2, V3, V4, V6 + 7, V8, and V9) is the most informative for breast tissue microbiota. Core needle biopsies (CNBs) were compared with surgical excision biopsies (SEBs) to find a less invasive form of recovery useful for the analysis of a larger statistical population and potentially for diagnostic use of breast tissue microbiota. Finally, this study was the first to analyse the breast microbiota of tumours and paired normal tissues of a Mediterranean population. Our findings showed that the V3 region is the most informative for breast tissue microbiota, accounting for 45% of all reads. No significant differences were found between CNB and SEB specimens in terms of total reads and numbers of Operational Taxonomic Units (OTUs). Moreover, we find that more similarities than differences exist between tumours and adjacent normal tissues. Finally, the presence of the Ralstonia genus is associated with breast tissue.

Diagnosis of bloodstream infections from positive blood cultures and directly from blood samples: recent developments in molecular approaches

BACKGROUND

Bloodstream infections are a major cause of death with increasing incidence and severity. Blood cultures are still the reference standard for microbiological diagnosis, but are rather slow. Molecular methods can be used as add-on complementary assays. They can be useful to speed up microbial identification and to predict antimicrobial susceptibility, applied to direct blood samples or positive blood cultures.

AIM

To review recent developments in molecular-based diagnostic platforms used for the identification of bloodstream infections, with a focus on assays performed directly on blood samples and positive blood cultures.

SOURCES

Peer reviewed articles, conference abstracts, and manufacturers' websites.

CONTENT

We give an update on recent developments of molecular methods in diagnosing BSIs. We first describe the currently available molecular methods to be used for positive blood cultures including: a) in situ hybridization-based methods; b) DNA-microarray-based hybridization technology; c) nucleic acid amplification-based methods; and d) combined methods. Subsequently, molecular methods applied directly to whole blood samples are discussed, including the use of nucleic acid amplification-based methods, T2 magnetic resonance-based methods, and metagenomics for diagnosing BSIs.

IMPLICATIONS

Advances in molecular-based methods complementary to conventional blood culture diagnostics and antimicrobial stewardship programmes may optimize infection management by allowing rapid identification of pathogens and relevant antimicrobial resistance genes. Rapid diagnosis of the causing microorganism and relevant resistance determinants is important for early administration and modification of appropriate antimicrobial therapy. Ultimately, this may lead to improved quality and cost-effectiveness of health care, as well as reduced antimicrobial resistance selection.

Fungal-Grade Reagents and Materials for Molecular Analysis

Fungal DNA is present at very low loads in clinical specimens. Molecular detection by amplification assays generally is a challenge because of a potentially multiple input of contaminating DNA from exogenous sources. Besides airborne, handling and cross-contamination, materials and reagents used in the molecular laboratory can contain microbial DNA which is a long underestimated potential source of false positive results. In this contribution decontamination procedures of materials and reagents and the selection of certified microbial DNA-free components for sample collection, DNA extraction, and PCR amplification are discussed with respect to the aim of building up a reliable molecular system for the diagnosis of fungal organisms at the limit of detection.

Nucleic Acid Extraction and Enrichment

Nucleic acid extraction is the first step of any amplification experiment no matter what kind of amplification is used to detect a specific pathogen. Efficient nucleic acid extraction is essential to obtain good results using any molecular test. The optimal extraction method should fulfill the following conditions: speed, short working time, cost-effectiveness, high sensitivity and specificity, good reproducibility, and safety. The methods can be divided into solution or column based according to differences of their principles. The automated extraction instruments have many advantages, and these have proven to be very useful. Moreover, in recent years, fully automated instruments combining NA extraction and amplification have been commercially available. However, the method itself does not provide assurance, and the DNA recovery can be different among various kits or instruments that use the similar principles. Therefore, it is important to carefully evaluate the performance of any extraction method used in the clinical microbiology laboratory even though manufacturers may have reported good validation results with specific organisms.

Comparison of microbial DNA enrichment tools for metagenomic whole genome sequencing

Metagenomic whole genome sequencing for detection of pathogens in clinical samples is an exciting new area for discovery and clinical testing. A major barrier to this approach is the overwhelming ratio of human to pathogen DNA in samples with low pathogen abundance, which is typical of most clinical specimens. Microbial DNA enrichment methods offer the potential to relieve this limitation by improving this ratio. Two commercially available enrichment kits, the NEBNext Microbiome DNA Enrichment Kit and the Molzym MolYsis Basic kit, were tested for their ability to enrich for microbial DNA from resected arthroplasty component sonicate fluids from prosthetic joint infections or uninfected sonicate fluids spiked with Staphylococcus aureus. Using spiked uninfected sonicate fluid there was a 6-fold enrichment of bacterial DNA with the NEBNext kit and 76-fold enrichment with the MolYsis kit. Metagenomic whole genome sequencing of sonicate fluid revealed 13- to 85-fold enrichment of bacterial DNA using the NEBNext enrichment kit. The MolYsis approach achieved 481- to 9580-fold enrichment, resulting in 7 to 59% of sequencing reads being from the pathogens known to be present in the samples. These results demonstrate the usefulness of these tools when testing clinical samples with low microbial burden using next generation sequencing.

Ribosomal RNA-based panbacterial polymerase chain reaction for rapid diagnosis of septicaemia in Intensive Care Unit patients

Early diagnosis and treatment of sepsis by appropriate antibiotics is of utmost importance. Therefore, we evaluated 16S rRNA panbacterial polymerase chain reaction (PCR) for rapid diagnosis of sepsis in 49 adult patients in Intensive Care Units (ICUs) and compared it with an automated blood culture. 8 ml of 10 ml blood collected was inoculated into BACTEC® aerobic bottle and the remaining 2 ml was used for DNA extraction and PCR. 109 of 115 (93%) episodes of suspected sepsis showed concordant results between automated culture and PCR. Six episodes were positive by PCR only. Panbacterial PCR reduces turnaround time with rapid differentiation between systemic inflammatory response syndrome and sepsis.

Development and Evaluation of a Blood Culture PCR Assay for Rapid Detection of Salmonella Paratyphi A in Clinical Samples

Background

Enteric fever remains an important cause of morbidity in many low-income countries and Salmonella Paratyphi A has emerged as the aetiological agent in an increasing proportion of cases. Lack of adequate diagnostics hinders early diagnosis and prompt treatment of both typhoid and paratyphoid but development of assays to identify paratyphoid has been particularly neglected. Here we describe the development of a rapid and sensitive blood culture PCR method for detection of Salmonella Paratyphi A from blood, potentially allowing for appropriate diagnosis and antimicrobial treatment to be initiated on the same day.

Methods

Venous blood samples from volunteers experimentally challenged orally with Salmonella Paratyphi A, who subsequently developed paratyphoid, were taken on the day of diagnosis; 10 ml for quantitative blood culture and automated blood culture, and 5 ml for blood culture PCR. In the latter assay, bacteria were grown in tryptone soy broth containing 2.4% ox bile and micrococcal nuclease for 5 hours (37°C) before bacterial DNA was isolated for PCR detection targeting the fliC-a gene of Salmonella Paratyphi A.

Results

An optimized broth containing 2.4% ox bile and micrococcal nuclease, as well as a PCR test was developed for a blood culture PCR assay of Salmonella Paratyphi A. The volunteers diagnosed with paratyphoid had a median bacterial burden of 1 (range 0.1–6.9) CFU/ml blood. All the blood culture PCR positive cases where a positive bacterial growth was shown by quantitative blood culture had a bacterial burden of ≥ 0.3 CFU/ ml blood. The blood culture PCR assay identified an equal number of positive cases as automated blood culture at higher bacterial loads (≥0.3 CFU/ml blood), but utilized only half the volume of specimens.

Conclusions

The blood culture PCR method for detection of Salmonella Paratyphi A can be completed within 9 hours and offers the potential for same-day diagnosis of enteric fever. Using 5 ml blood, it exhibited a lower limit of detection equal to 0.3 CFU/ml blood, and it performed at least as well as automated blood culture at higher bacterial loads (≥0.3 CFU/ml blood) of clinical specimens despite using half the volume of blood. The findings warrant its further study in endemic populations with a potential use as a novel diagnostic which fills the present gap of paratyphoid diagnostics.

Hot start reverse transcriptase: an approach for improved real-time RT-PCR performance

BACKGROUND

Reverse transcriptase is an indispensable enzyme for real-time reverse transcriptase (RT)-PCR, a standard method in molecular diagnostics for detection and quantification of defined RNA molecules. The prevention of non-specific products due to elongation of misprimed oligonucleotides by the enzyme at temperatures beneath the specific annealing temperature is one of the biggest challenges in real-time RT-PCR.In the present study, an aptamer directed against the reverse transcriptase was analyzed for its potential to attain a temperature-dependent reverse transcriptase ("hot start" RT).

FINDINGS

The hot start effect was investigated in a one-step real-time RT-PCR assay for the detection of Middle East respiratory syndrome coronavirus (MERS-CoV). Results with aptamer revealed a reduced RT activity at low temperatures while achieving full activity at the specific annealing temperature of 55 °C. Sensitivity (limit of detection (LoD) 95 %) of the MERS-CoV assay was increased by about two times in the presence of aptamer.

CONCLUSIONS

The study demonstrates the potential of aptamer-dependent hot start RT for the improvement of diagnostic real-time RT-PCR assays.

16S Ribosomal Ribonucleic Acid Gene Polymerase Chain Reaction in the Diagnosis of Bloodstream Infections: A Systematic Review and Meta-Analysis

Objective

We aim to evaluate the accuracy of the 16S ribosomal ribonucleic acid (rRNA) gene polymerase chain reaction (PCR) test in the diagnosis of bloodstream infections through a systematic review and meta-analysis.

Methods

A computerized literature search was conducted to identify studies that assessed the diagnostic value of 16S rRNA gene PCR test for bloodstream infections. Study quality was assessed using the revised Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool. We calculated the sensitivity, specificity, positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic odds ratio (DOR) and their 95% confidence intervals (95% CI) for each study. Summary receiver operating characteristic (SROC) curve was used to summarize overall test performance. Statistical analysis was performed in Meta-DiSc 1.4 and Stata/SE 12.0 software.

Results

Twenty-eight studies were included in our meta-analysis. Using random-effect model analysis, the pooled sensitivity, specificity, PLR, NLR, and DOR were 0.87 (95% CI, 0.85–0.89), 0.94 (95% CI, 0.93–0.95), 12.65 (95% CI, 8.04–19.90), 0.14 (95% CI, 0.08–0.24), and 116.76 (95% CI, 52.02–262.05), respectively. The SROC curve indicated that the area under the curve (AUC) was 0.9690 and the maximum joint sensitivity and specificity (Q*) was 0.9183. In addition, heterogeneity was statistically significant but was not caused by the threshold effect.

Conclusion

Existing data suggest that 16S rRNA gene PCR test is a practical tool for the rapid screening of sepsis. Further prospective studies are needed to assess the diagnostic value of PCR amplification and DNA microarray hybridization of 16S rRNA gene in the future.

An observational study examining the relationship between respiratory symptoms, airway inflammation and bacteriology in children with severe neurodisability

Background

Children with severe neurodisability (ND) commonly suffer from chronic respiratory symptoms that impact greatly on quality of life, and lead to recurrent hospital admissions. This morbidity (and its causes) is poorly described, despite being well recognised by paediatricians. In this study, we characterised respiratory symptoms in children with ND at times of stability and deterioration. We also assessed the relationship between respiratory symptoms, lower airway inflammatory markers and levels of infection/colonisation.

Methods

ND children were recruited upon admission for elective surgery (Elective-ND [n = 16]), or acutely upon admission to Intensive Care (PICU-ND [n = 19]), and compared to healthy control children [n = 12]. Parents completed a validated respiratory symptom questionnaire in which symptoms associated with activity were removed (total maximal score of 108). Bronchoalveolar lavage (BAL) was collected, and BAL neutrophil counts, IL-8 and TGFβ-1 levels measured. BAL microbial analysis was performed using a 16S/18S rRNA gene based assay and Pseudomonas aeruginosa PCR.

Results

All ND children had high levels of respiratory symptoms (median [IQR] symptom score PICU-ND, 55[38-64]; Elective-ND, 26[7-45]; Control, 4[0-7]: p<0.01), which affected their families, particularly at nighttime. Elective-ND patients with a total respiratory symptom score >20 invariably had BAL neutrophilia. Elective patients with 16S/18S microbial rDNA positive BAL had higher neutrophil counts (positive, 33[18-70]%; negative, 8[4-38]%: p<0.05) and generally higher symptom scores (positive, 17[5-32]; negative, 5[0-9]: p = 0.097). Streptococcus mitis was commonly identified in BAL from ND children; Pseudomonas aeruginosa was not identified in any sample.

Conclusions

Children with severe ND often have high levels of chronic respiratory symptoms, which may relate to lower airway inflammation. Bacterial airway colonisation, particularly with oral commensals, may play a role in both symptom generation and inflammation.

Higher blood volumes improve the sensitivity of direct PCR diagnosis of blood stream tuberculosis among HIV-positive patients: an observation study

Background

Blood stream tuberculosis (TB), caused by Mycobacterium tuberculosis (MTB) is common among HIV-positive patients, turning rapidly fatal unless detected and treated promptly. Blood culture is currently the standard test for the detection of MTB in whole blood but results take weeks; patients deteriorate markedly and often die before a diagnosis of blood stream TB is made. Rapid molecular tests on whole blood, with potential for same day diagnosis of blood stream TB usually show low sensitivity due to the problem of insufficient MTB DNA template when extraction is performed directly on low blood volumes. This study assessed the influence of blood volume on the sensitivity of a HyBeacon PCR assay-the FluoroType® MTB (Hain Lifescience, Nehren, Germany) on direct detection of MTB in whole blood.

Methods

Prospective recruitment of HIV-positive patients with clinical suspicion of blood stream TB but not on anti-TB or HIV drug treatment was done. Venous blood samples were collected and DNA extracted using the MolYsis (Molzym, Bremen, Germany) methods; for study A, from duplicate 1 ml (42 patients) and for study B (31 patients) from 9 ml EDTA blood samples. The FluoroType® MTB PCR assay targeting an IS6110 sequence was performed and results compared with blood culture.

Results

The diagnostic sensitivity and specificity of the FluoroType® MTB PCR in study A was 33% and 97%, respectively. Corresponding values in study B were 71% and 96%, respectively. In both studies, one case each of blood culture-negative blood stream TB was detected with the FluoroType® MTB PCR assay. The median time to positivity of blood culture was 20.1 (range 12–32) for study A and 19.9 days (range 15–30) for study B.

Conclusion

Larger blood volumes (9 ml) improved and gave acceptable sensitivity of direct PCR diagnosis of blood stream TB.

Bacterial and fungal DNA extraction from blood samples: manual protocols

A critical point of molecular diagnosis of systemic infections is the method employed for the extraction of microbial DNA from blood. A DNA isolation method has to be able to fulfill several fundamental requirements for optimal performance of diagnostic assays. First of all, low- and high-molecular-weight substances of the blood inhibitory to downstream analytical reactions like PCR amplification have to be removed. This includes human DNA which is a known source of false-positive results and factor decreasing the analytical sensitivity of PCR assays by unspecific primer binding. At the same time, even extremely low amounts of microbial DNA need to be supplied to molecular diagnostic assays in order to detect low pathogen loads in the blood. Further, considering the variety of microbial etiologies of sepsis, a method should be capable of lysing Gram-positive, Gram-negative, and fungal organisms. Last, extraction buffers, reagents, and consumables have to be free of microbial DNA which leads to false-positive results. Here, we describe manual methods which allow the extraction of microbial DNA from small- and large-volume blood samples for the direct molecular analysis of pathogen.

Rapid and fully automated bacterial pathogen detection on a centrifugal-microfluidic LabDisk using highly sensitive nested PCR with integrated sample preparation

Diagnosis of infectious diseases suffers from long turnaround times for gold standard culture-based identification of bacterial pathogens, therefore impeding timely specific antimicrobial treatment based on laboratory evidence. Rapid molecular diagnostics-based technologies enable detection of microorganisms within hours however cumbersome workflows and complex equipment still prevent their widespread use in the routine clinical microbiology setting. We developed a centrifugal-microfluidic "LabDisk" system for rapid and highly-sensitive pathogen detection on a point-of-care analyser. The unit-use LabDisk with pre-stored reagents features fully automated and integrated DNA extraction, consensus multiplex PCR pre-amplification and geometrically-multiplexed species-specific real-time PCR. Processing merely requires loading of the sample and DNA extraction reagents with minimal hands-on time of approximately 5 min. We demonstrate detection of as few as 3 colony-forming-units (cfu) of Staphylococcus warneri, 200 cfu of Streptococcus agalactiae, 5 cfu of Escherichia coli and 2 cfu of Haemophilus influenzae in a 200 μL serum sample. The turnaround time of the complete analysis from "sample-to-result" was 3 h and 45 min. The LabDisk consequently provides an easy-to-use molecular diagnostic platform for rapid and highly-sensitive detection of bacterial pathogens without requiring major hands-on time and complex laboratory instrumentation.

First experience of a multicenter external quality assessment of molecular 16S rRNA gene detection in bone and joint infections

The objective of this study was to assess the performance of seven French laboratories for 16S rRNA gene detection by real-time PCR in the diagnosis of bone and joint infection (BJI) to validate a large multicenter study. External quality control (QC) was required owing to the differences in extraction procedures and the molecular equipment used in the different laboratories. Three proficiency sets were organized, including four bacterial DNA extracts and four bead mill-pretreated osteoarticular specimens. Extraction volumes, 16S rRNA gene primers, and sequencing interpretation rules were standardized. In order to assess each laboratory's ability to achieve the best results, scores were assigned, and each QC series was classified as optimal, acceptable, or to be improved. A total of 168 QCs were sent, and 160 responses were analyzed. The expected results were obtained for 93.8%, with the same proportion for extracts (75/80) and clinical specimens (75/80). For the specimens, there was no significant difference between manual and automated extraction. This QC demonstrated the ability to achieve good and homogeneous results using the same 16S rRNA gene PCR with different equipment and validates the possibility of high-quality multicenter studies using molecular diagnosis for BJI.

Improved sensitivity for molecular detection of bacterial and Candida infections in blood

The rapid identification of bacteria and fungi directly from the blood of patients with suspected bloodstream infections aids in diagnosis and guides treatment decisions. The development of an automated, rapid, and sensitive molecular technology capable of detecting the diverse agents of such infections at low titers has been challenging, due in part to the high background of genomic DNA in blood. PCR followed by electrospray ionization mass spectrometry (PCR/ESI-MS) allows for the rapid and accurate identification of microorganisms but with a sensitivity of about 50% compared to that of culture when using 1-ml whole-blood specimens. Here, we describe a new integrated specimen preparation technology that substantially improves the sensitivity of PCR/ESI-MS analysis. An efficient lysis method and automated DNA purification system were designed for processing 5 ml of whole blood. In addition, PCR amplification formulations were optimized to tolerate high levels of human DNA. An analysis of 331 specimens collected from patients with suspected bloodstream infections resulted in 35 PCR/ESI-MS-positive specimens (10.6%) compared to 18 positive by culture (5.4%). PCR/ESI-MS was 83% sensitive and 94% specific compared to culture. Replicate PCR/ESI-MS testing from a second aliquot of the PCR/ESI-MS-positive/culture-negative specimens corroborated the initial findings in most cases, resulting in increased sensitivity (91%) and specificity (99%) when confirmed detections were considered true positives. The integrated solution described here has the potential to provide rapid detection and identification of organisms responsible for bloodstream infections.

Nickel nanoparticle-doped paper as a bioactive scaffold for targeted and robust immobilization of functional proteins

Cellulose-based materials are widely used in analytical chemistry as platforms for chromatographic and immunodiagnostic techniques. Due to its countless advantages (e.g., mechanical properties, three-dimensional structure, large surface to volume area, biocompatibility and biodegradability, and high industrial availability), paper has been rediscovered as a valuable substrate for sensors. Polymeric materials such as cellulosic paper present high protein capture ability, resulting in a large increase of detection signal and improved assay sensitivity. However, cellulose is a rather nonreactive material for direct chemical coupling. Aiming at developing an efficient method for controlled conjugation of cellulose-based materials with proteins, we devised and fabricated a hybrid scaffold based on the adsorption and in situ self-assembly of surface-oxidized Ni nanoparticles on filter paper, which serve as "docking sites" for the selective immobilization of proteins containing polyhistidine tags (His-tag). We demonstrate that the interaction between the nickel substrate and the His-tagged protein G is remarkably resilient toward chemicals at concentrations that quickly disrupt standard Ni-NTA and Ni-IDA complexes, so that this system can be used for applications in which a robust attachment is desired. The bioconjugation with His-tagged protein G allowed the binding of anti-Salmonella antibodies that mediated the immuno-capture of live and motile Salmonella bacteria. The versatility and biocompatibility of the nickel substrate were further demonstrated by enzymatic reactions.

Developments for improved diagnosis of bacterial bloodstream infections

Bloodstream infections (BSIs) are associated with high mortality and increased healthcare costs. Optimal management of BSI depends on several factors including recognition of the disease, laboratory tests and treatment. Rapid and accurate identification of the etiologic agent is crucial to be able to initiate pathogen specific antibiotic therapy and decrease mortality rates. Furthermore, appropriate treatment might slow down the emergence of antibiotic resistant strains. Culture-based methods are still considered to be the "gold standard" for the detection and identification of pathogens causing BSI. Positive blood cultures are used for Gram-staining. Subsequently, positive blood culture material is subcultured on solid media, and (semi-automated) biochemical testing is performed for species identification. Finally, a complete antibiotic susceptibility profile can be provided based on cultured colonies, which allows the start of pathogen-tailored antibiotic therapy. This conventional workflow is extremely time-consuming and can take up to several days. Furthermore, fastidious and slow-growing microorganisms, as well as antibiotic pre-treated samples can lead to false-negative results. The main aim of this review is to present different strategies to improve the conventional laboratory diagnostic steps for BSI. These approaches include protein-based (MALDI-TOF mass spectrometry) and nucleic acid-based (polymerase chain reaction [PCR]) identification from subculture, blood cultures, and whole blood to decrease time to results. Pathogen enrichment and DNA isolation methods, to enable optimal pathogen DNA recovery from whole blood, are described. In addition, the use of biomarkers as patient pre-selection tools for molecular assays are discussed.

Specific enrichment of prokaryotic DNA using a recombinant DNA-binding protein

Targeted enrichment of DNA is often necessary for its detection and characterization in complex samples. We describe the development and application of the novel molecular tool for the specific enrichment of prokaryotic DNA. A fused protein comprising the DNA-binding subunit of the bacterial topoisomerase II, gyrase, was expressed, purified, and immobilized on magnetic particles. We demonstrated the specific affinity of the immobilized protein towards bacterial DNA and investigated its efficiency in the samples with high background of eukaryotic DNA. The reported approach allowed for the selective isolation and further detection of as few as 5 pg Staphylococcus aureus DNA from the sample with 4 × 10(6)-fold surplus of human DNA. This method is a promising approach for the preparation of such type of samples, for example in molecular diagnostics of sepsis.

Molecular diagnosis of sepsis: New aspects and recent developments

By shortening the time to pathogen identification and allowing for detection of organisms missed by blood culture, new molecular methods may provide clinical benefits for the management of patients with sepsis. While a number of reviews on the diagnosis of sepsis have recently been published we here present up-to-date new developments including multiplex PCR, mass spectrometry and array techniques. We focus on those techniques that are commercially available and for which clinical studies have been performed and published.

Microbial adhesion on membrane oxygenators in patients requiring extracorporeal life support detected by a universal rDNA PCR test

Extracorporeal membrane oxygenation (ECMO) represents a temporary life-saving therapy for respiratory or circulatory failure, but infections during ECMO support are a life-threatening complication. Surface-related infections of ECMO are mentioned, but rarely described in the literature. A universal rDNA polymerase chain reaction (PCR) test was used to investigate the potential microbiological colonization of membrane oxygenators (MOs) in 20 patients undergoing ECMO. The overall patient-based positivity by PCR was 45%. Gram-positive bacteria (71%) represented the most abundant microorganisms on MO surfaces, followed by Gram-negative bacteria (22%) and fungi (7%). The most frequently detected causative pathogens were staphylococci (58%). Bacterial mixed infections represented 56% of all infections. In four PCR-positive cases, the pathogens detected on the MO surfaces were also found by blood culture or by culture of specimens obtained from the infectious focus. In conclusion, hollow fiber membranes of MOs can be colonized by microorganisms and appear to be a potential source of bacterial and fungal infections in ECMO patients. These infections may pose an increased risk for clinical worsening. As a consequence, persistent septic complications have to be discussed as an indication for MO exchange. The initial results suggest that the applied PCR assay is a valuable tool to investigate MOs.

Microbial translocation in the pathogenesis of HIV infection and AIDS

In pathogenic simian immunodeficiency virus (SIV) and human immunodeficiency virus (HIV) infections, the translocation of microbial products from the gastrointestinal (GI) tract to portal and systemic circulation has been proposed as a major driver of the chronic immune activation that is associated with disease progression. Consistently, microbial translocation is not present in nonpathogenic SIV infections of natural host species. In vivo studies demonstrated that HIV/SIV-associated microbial translocation results from a series of immunopathological events occurring at the GI mucosa: (i) early and severe mucosal CD4(+) depletion, (ii) mucosal immune hyperactivation/persistent inflammation; (iii) damage to the integrity of the intestinal epithelium with enterocyte apoptosis and tight junction disruption; and (iv) subverted the gut microbiome, with a predominance of opportunistic bacteria. Direct in situ evidence of microbial translocation has been provided for SIV-infected rhesus macaques showing translocated microbial products in the intestinal lamina propria and distant sites. While the mechanisms by which microbial translocation causes immune activation remain controversial, a key pathogenic event appears to be innate immunity activation via Toll-like receptors and other pathogen recognition receptors. Accumulating clinical observations suggest that microbial translocation might affect HIV disease progression, response to therapy, and non-AIDS comorbidities. Given its detrimental effect on overall immunity, several interventions to prevent/block microbial translocation are currently under investigation as novel therapeutic agents for HIV/AIDS.

Nucleic Acid Extraction Techniques

Since thermostable Taq DNA polymerase was discovered in 1987, nucleic acid amplification techniques have made great strides and contributed greatly to progress in the life sciences. These techniques were introduced into the clinical laboratory and have produced great changes in diagnostic tools and tests. In particular, there have been many innovative molecular testing developments in the field of diagnostic microbiology.

A novel method of selective removal of human DNA improves PCR sensitivity for detection of Salmonella Typhi in blood samples

Background

Enteric fever is a major public health problem, causing an estimated 21million new cases and 216,000 or more deaths every year. Current diagnosis of the disease is inadequate. Blood culture only identifies 45 to 70% of the cases and is time-consuming. Serological tests have very low sensitivity and specificity. Clinical samples obtained for diagnosis of enteric fever in the field generally have <1 organism/ml of blood, so that even PCR-based methods, widely used for detection of other infectious diseases, are not a straightforward option in typhoid diagnosis. We developed a novel method to enrich target bacterial DNA by selective removal of human DNA from blood samples, enhancing the sensitivity of PCR tests. This method offers the possibility of improving PCR assays directly using clinical specimens for diagnosis of this globally important infectious disease.

Methods

Blood samples were mixed with ox bile for selective lysis of human blood cells and the released human DNA was then digested with addition of bile resistant micrococcal nuclease. The intact Salmonella Typhi bacteria were collected from the specimen by centrifugation and the DNA extracted with QIAamp DNA mini kit. The presence of Salmonella Typhi bacteria in blood samples was detected by PCR with the fliC-d gene of Salmonella Typhi as the target.

Results

Micrococcal nuclease retained activity against human blood DNA in the presence of up to 9% ox bile. Background human DNA was dramatically removed from blood samples through the use of ox bile lysis and micrococcal nuclease for removal of mammalian DNA. Consequently target Salmonella Typhi DNA was enriched in DNA preparations and the PCR sensitivity for detection of Salmonella Typhi in spiked blood samples was enhanced by 1,000 fold.

Conclusions

Use of a combination of selective ox-bile blood cell lysis and removal of human DNA with micrococcal nuclease significantly improves PCR sensitivity and offers a better option for improved typhoid PCR assays directly using clinical specimens in diagnosis of this globally important infection disease which we believe could be of importance in improving clinical care and providing effective evaluation of novel vaccines.

Isothermal nucleic acid amplification technologies for point-of-care diagnostics: a critical review

Nucleic Acid Testing (NAT) promises rapid, sensitive and specific diagnosis of infectious, inherited and genetic disease. The next generation of diagnostic devices will interrogate the genetic determinants of such conditions at the point-of-care, affording clinicians prompt reliable diagnosis from which to guide more effective treatment. The complex biochemical nature of clinical samples, the low abundance of nucleic acid targets in the majority of clinical samples and existing biosensor technology indicate that some form of nucleic acid amplification will be required to obtain clinically relevant sensitivities from the small samples used in point-of-care testing (POCT). This publication provides an overview and thorough review of existing technologies for nucleic acid amplification. The different methods are compared and their suitability for POCT adaptation are discussed. Current commercial products employing isothermal amplification strategies are also investigated. In conclusion we identify the factors impeding the integration of the methods discussed in fully automated, sample-to-answer POCT devices.

Bacterial diversity in suspected prosthetic joint infections: an exploratory study using 16S rRNA gene analysis

Formation of biofilm is a prominent feature of prosthetic joint infections (PJIs) and constitutes a challenge to current sampling procedures and culture practices. Molecular techniques have a potential for improving diagnosis of biofilm-adapted, slow-growing and non-culturable bacteria. In this exploratory study we investigated the bacterial diversity in specimens from 22 patients clinically suspected of having PJIs. Bacteriological cultures were performed according to standard practice. A total of 55 specimens from 25 procedures ('specimen sets') were submitted to broad range 16S rRNA gene PCR, cloning, sequencing and phylogenetic analysis. More than 40 bacterial taxa within six phyla were identified in 14 specimen sets originating from 11 patients. Direct observation of biofilm was made in selected specimens by fluorescence in situ hydridization. 16S rRNA gene analysis and bacteriological cultures were concordant for 15/25 specimen sets (60%; five positive, 10 negative); additional taxa were detected in four sets by gene analysis, and discrepant results were obtained for six sets, five of which were negative on culture. Polymicrobial communities were revealed in 9/14 sets by gene analysis and 1/10 sets by culture (P < 0.05). Although our study was not conclusive, these findings are consistent with a primary role of biofilm formation in PJIs.

Dual priming oligonucleotides for broad-range amplification of the bacterial 16S rRNA gene directly from human clinical specimens

Broad-range amplification and sequencing of the bacterial 16S rRNA gene directly from clinical specimens are offered as a diagnostic service in many laboratories. One major pitfall is primer cross-reactivity with human DNA which will result in mixed chromatograms. Mixed chromatograms will complicate subsequent sequence analysis and impede identification. In SYBR green real-time PCR assays, it can also affect crossing threshold values and consequently the status of a specimen as positive or negative. We evaluated two conventional primer pairs in common use and a new primer pair based on the dual priming oligonucleotide (DPO) principle. Cross-reactivity was observed when both conventional primer pairs were used, resulting in interpretation difficulties. No cross-reactivity was observed using the DPOs even in specimens with a high ratio of human to bacterial DNA. In addition to reducing cross-reactivity, the DPO principle also offers a high degree of flexibility in the design of primers and should be considered for any PCR assay intended for detection and identification of pathogens directly from human clinical specimens.

Broad-range bacterial polymerase chain reaction in the microbiologic diagnosis of complicated pneumonia

BACKGROUND

A bacterial cause is not frequently identified in children with pneumonia complicated by parapneumonic effusion (ie, complicated pneumonia).

OBJECTIVES

To determine the frequency of positive blood and pleural fluid cultures in children with complicated pneumonia and to determine whether broad-range 16S rRNA polymerase chain reaction (PCR) improves identification of a microbiologic cause.

METHODS

This prospective cohort study included children 1-18 years of age hospitalized with complicated pneumonia.

RESULTS

Pleural fluid drainage was performed in 64 (51.6%) of 124 children with complicated pneumonia. A microbiologic cause was identified in 11 of 64 patients (17.2%; 95% confidence interval [CI]: 8.9%-28.7%). Bacteria were isolated from pleural fluid culture in 6 of 64 patients (9.4 %; 95% CI: 3.5%-19.3%) undergoing pleural drainage; the causative bacteria were Staphylococcus aureus (n = 5) and Streptococcus pneumoniae (n = 1). Blood culture identified a bacterial cause in 3 of 44 cases (6.8%; 95% CI: 1.4%-18.7%) undergoing pleural fluid drainage; S. pneumoniae (n = 1), Haemophilus influenzae (n = 1), and S. aureus (n = 1) were isolated. Only 3 of the 19 pleural fluid samples (15.8%; 95% CI: 3.4%-39.6%) analyzed with 16S rRNA PCR were positive. S. pneumoniae was the only organism detected in all three samples; two of these three had negative pleural fluid cultures and absence of bacteria on Gram stain. S. aureus was isolated from pleural fluid culture in one patient with a negative 16S rRNA PCR test.

CONCLUSIONS

Causative bacteria were infrequently identified in children with complicated pneumonia. Broad-range 16S rRNA PCR only modestly improved the microbiologic yield over conventional culture methods.

A real-time PCR antibiogram for drug-resistant sepsis

Current molecular diagnostic techniques for susceptibility testing of septicemia rely on genotyping for the presence of known resistance cassettes. This technique is intrinsically vulnerable due to the inability to detect newly emergent resistance genes. Traditional phenotypic susceptibility testing has always been a superior method to assay for resistance; however, relying on the multi-day growth period to determine which antimicrobial to administer jeopardizes patient survival. These factors have resulted in the widespread and deleterious use of broad-spectrum antimicrobials. The real-time PCR antibiogram, described herein, combines universal phenotypic susceptibility testing with the rapid diagnostic capabilities of PCR. We have developed a procedure that determines susceptibility by monitoring pathogenic load with the highly conserved 16S rRNA gene in blood samples exposed to different antimicrobial drugs. The optimized protocol removes heme and human background DNA from blood, which allows standard real-time PCR detection systems to be employed with high sensitivity (<100 CFU/mL). Three strains of E. coli, two of which were antimicrobial resistant, were spiked into whole blood and exposed to three different antibiotics. After real-time PCR-based determination of pathogenic load, a ΔC_t<3.0 between untreated and treated samples was found to indicate antimicrobial resistance (P<0.01). Minimum inhibitory concentration was determined for susceptible bacteria and pan-bacterial detection was demonstrated with 3 Gram-negative and 2 Gram-positive bacteria. Species identification was performed via analysis of the hypervariable amplicons. In summary, we have developed a universal diagnostic phenotyping technique that assays for the susceptibility of drug-resistant septicemia with the speed of PCR. The real-time PCR antibiogram achieves detection, susceptibility testing, minimum inhibitory concentration determination, and identification in less than 24 hours.

Evaluation of commercial universal rRNA gene PCR plus sequencing tests for identification of bacteria and fungi associated with infectious endocarditis

Two new commercially available universal rRNA gene PCR plus sequencing tests, SepsiTest and universal microbe detection (UMD; Molzym, Bremen, Germany), were evaluated using blood specimens and heart valves from 30 patients with suspected infectious endocarditis (IE). The sensitivity of PCR (85%) was nearly twice as high as that of culture (45%), which in 10/20 IE cases presumably stayed negative as a consequence of growth inhibition of the pathogens by antibiotics. Further, PCR provided the basis for reclassification of 5/10 non-IE cases into IE cases. Culture-negative infections were identified by PCR, including single infections due to streptococci and Gram-negative bacteria (Escherichia coli, Haemophilus parainfluenzae) and mixed infections involving two Gram-positive bacteria or Candida spp. with Gram-positive bacteria. The new commercial tests proved to be of value for the rapid diagnosis of IE, particularly in cases of culture-negative infections. Issues regarding the feasibility of these tests for routine use are discussed.

Establishment of a semi-automated pathogen DNA isolation from whole blood and comparison with commercially available kits

Molecular methods for bacterial pathogen identification are gaining increased importance in routine clinical diagnostic laboratories. Achieving reliable results using DNA based technologies is strongly dependent on pre-analytical processes including isolation of target cells and their DNA of high quality and purity. In this study a fast and semi-automated method was established for bacterial DNA isolation from whole blood samples and compared to different commercially available kits: Looxster, MolYsis kit, SeptiFast DNA isolation method and standard EasyMAG protocol. The newly established, semi-automated method utilises the EasyMAG device combined with pre-processing steps comprising human cell lysis, centrifugation and bacterial pellet resuspension. Quality of DNA was assessed by a universal PCR targeting the 16S rRNA gene and subsequent microarray hybridisation. The DNA extractions were amplified using two different PCR-mastermixes, to allow comparison of a commercial mastermix with a guaranteed bacterial DNA free PCR mastermix. The modified semi-automated EasyMAG protocol and the Looxster kit gave the most sensitive results. After hybridisation a detection limit of 10(1) to 10(2) bacterial cells per mL whole blood was achieved depending on the isolation method and microbial species lysed. Human DNA present in the isolated DNA suspension did not interfere with PCR and did not lead to non-specific hybridisation events.