Hydroxyapatite-based composites: Excellent materials for environmental remediation and biomedical applications

Tribological properties of hydroxyapatite-coated nanorods on Ti-6Al-4V surfaces

This paper presents the tribological properties and bioactivity of nanostructured hydroxyapatite (HA) from biowaste sources and coated onto Ti-6Al-4V substrates using a novel pack cementation method. The process introduced HA pillars/nanorods on the surfaces of Ti-6Al-4V to enhance their osseointegration for dental implants. The mechanical and tribological properties were studied with nanoindentation, and pin-on-disk techniques, following the microstructural characterization of the coatings with atomic force microscopy, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and energy dispersive x-ray spectroscopy. The study also examines the surface bioactivity and elucidates the underlying friction and wear mechanisms of the HA-coated and annealed Ti-6Al-4V surface. The study results show a bone bonding capacity of the biowaste-derived HA-coated substrate with improved hardness and tribological properties. The implications of the study are discussed for the development of nano-structured HA-coated Ti-6Al-4V for dental implants with improved osseointegration for dental and biomedical applications.

A new method for synthesizing hydroxyapatite from eggshell and sludge and its calcination exploration

This study presents a novel low-cost synthesis methodology for hydroxyapatite (HAP). HAP was successfully synthesized via a simplified chemical process utilizing eggshells as a calcium source and sludge as a phosphorus source. This approach not only addresses the dual challenges of eggshell and sludge disposal but also establishes an innovative pathway for sustainable and economically viable HAP production. The influence of calcination parameters (The optimal conditions are 600oC for 3 h) on the microstructure of HAP was systematically investigated, revealing that optimized calcination conditions significantly enhance crystallinity and porosity. Comprehensive characterization of the synthesized HAP was performed using X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Post-calcination characterization revealed significant crystallographic refinement, accompanied by a 95% enhancement in Brunauer-Emmett-Teller (BET) surface area (57.23 m²/g) compared to precursor materials. Analytical results confirmed the high purity and exceptional physicochemical properties of the synthesized HAP, demonstrating substantial potential for applications in environmental remediation and biomedical engineering. This work advances a green and cost-effective strategy for HAP synthesis while pioneering a resource-efficient utilization route for waste-derived eggshells and sludge.

Localized assembly in biological activity: Origin of life and future of nanoarchitectonics

The concept of nanoarchitectonics has emerged as a post-nanotechnology paradigm in the field of functional materials development. This concept entails the construction of functional material systems at the nanoscale, based on the knowledge acquired from nanotechnology. In biological systems, advanced nanoarchitectonics is achieved through precise structural organization governed by spatial localization, a process facilitated by localized assembly mechanisms. A thorough understanding of the principles of localized assembly is crucial for the creation of complex, asymmetric, hierarchical organizations that are similar in structure and function to living organisms. This review explores the concept of localized assembly, highlighting its biological inspiration, providing representative examples, and discussing its contributions to nanoarchitectonics. Key examples include assemblies using biological materials, those mimicking cellular functions, and those occurring within cells. Additionally, the role of interfacial interactions and liquid-liquid phase separation in localized assembly is emphasized. Particularly, the utilization of liquid-liquid phase separation demonstrates a remarkable capacity for forming intricate compartmentalized structures without discernible membranes, paving the way for multifunctional, localized systems. These localized assemblies are fundamental to essential biological functions and provide valuable insights into the molecular mechanisms underlying the origin of cells and life. Such understanding holds significant promise for advancing materials nanoarchitectonics, particularly in biomedical applications.

Ultrasound-responsive smart biomaterials for bone tissue engineering

Bone defects resulting from trauma, tumors, or other injuries significantly impact human health and quality of life. However, current treatments for bone defects are constrained by donor shortages and immune rejection. Bone tissue engineering has partially alleviated the limitations of traditional bone repair methods. The development of smart biomaterials that can respond to external stimuli to modulate the biofunctions has become a prominent area of research. Ultrasound technology is regarded as an optimal "remote controller" and "trigger" for bone repair biomaterials. This review reports the comprehensive and systematic overview of ultrasound-responsive bone repair smart biomaterials. It presents the fundamental theories of bone repair, the definition of ultrasound, and its applications. Furthermore, the review summarizes the ultrasound effect mechanisms of biomaterials and their roles in bone repair, including detailed studies on anti-inflammation, immunomodulation, and cell therapy. Finally, the advantages of ultrasound-responsive smart biomaterials and their future prospects in this field are discussed.

Structure and Property Evolution of Microinjection Molded PLA/PCL/Bioactive Glass Composite

In this study, the microinjection molding technology was adopted to prepare polylactic acid (PLA)/polycaprolactone (PCL)/bioactive glass (BG) composites with varying BG contents for biomedical applications. The various measurement techniques, including scanning electronic microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, the water contact angle (WCA) test, the mechanical test, and in vitro biological evaluations, were applied to characterize the above interesting biocomposites. The experimental results show that the extremely strong shear force field generated during the microinjection molding process could induce the in situ formation of micron PCL dispersed phase fibril structures and strongly promote the homogeneous dispersion of micron BG filler particles in the PLA/PCL polymer matrix, which therefore leads to a significant improvement in the specific mechanical property of the PLA/PCL/BG composite. For example, with BG fillers content increasing to 10 wt%, the Young's modulus of the above obtained PLA/PCL/BG composite could reach 2122.9 MPa, which is 1.47 times higher than that of the unfilled PLA/PCL blend material. In addition, it is also found that under the simulated body fluid (SBF) environment, the incorporated BG fillers in the PLA/PCL polymer matrix could be effectively transformed into hydroxyapatite (HA) components on the treated sample surface, thus being greatly advantageous to enhancing the material's in vitro bioactivity. Obviously, the microinjection molded PLA/PCL/BG biocomposites could exhibit excellent comprehensive performance, revealing that the microinjection molding processing method could hold great potential in industrialization applications of the resulting biodegradable biomedical materials.

Polydopamine-functionalized nanohydroxyapatite coated exosomes with enhanced cytocompatibility and osteogenesis for bone regeneration

BackgroundMesenchymal stem cells-derived exosomes, crucial in regenerative medicine, have been explored for their potential for the functional modification of bone scaffolds.ObjectiveTo design a functionally modified biomimetic nanohydroxyapatite using exosomes and explore its effects on bone regeneration.MethodsA biomimetic nanohydroxyapatite (named as tHA) was fabricated as previous methods using a polydopamine (pDA) structure as a template, and exosomes (Exo) derived from periodontal ligament stem cells (PDLSCs) were used to functionally modify the tHA scaffold material through pDA. The effects of functional composite scaffold (tHA-Exo) on cells proliferation and osteogenic differentiation were investigated. Furthermore, their effect on bone regeneration was also evaluated in vivo.ResultsExosomes can be loaded onto the tHA via pDA and the tHA-Exo releases exosomes in a sustained and stable manner. tHA-Exo showed improved cytocompatibility compared to controls. Additionally, tHA-Exo significantly enhanced the proliferation and osteogenic differentiation of PDLSCs. More importantly, animal experiments have shown that tHA-Exo could dramatically promote bone regeneration.ConclusionThe tHA nanoparticles, functionally modified by the PDLSCs-Exo through pDA, significantly promoted bone regeneration by improving its cytocompatibility and osteogenic potential, which could serve as a promising material for promoting bone regeneration.

Electrochemical oxidation of glyphosate coupled with induced crystallization for simultaneous phosphorus recovery

Non-reactive phosphates (NRPs) need to be transformed into orthophosphate (PO43-, P) before they can be precipitated for recovery from water. This study provides a technology for simultaneous degradation and recovery of NRPs through electrochemical advanced oxidation (EAO) coupled with induced crystallization (IC). The EAO-IC process can achieve a degradation rate of 100% of 1 mM glyphosate (Gly), conversion rate of 98.1% of Gly to P, and efficient resource recovery of 79.1% of P to amorphous calcium phosphate (ACP) products with the reaction time of 5h. The use of a carbon felt (CF) wrapped Ti plate cathode provides a localized high pH environment and abundant nucleation sites for efficient recovery of P. Meanwhile, CF-Ti promotes the transfer of the precipitation region of ACP from the liquid phase to the solid phase. Compared with the Ti system, the phosphorus recovery rate and the Ca2+ precipitation rate increased by 5 times and 3.8 times in the CF/Ti system. And 98% of the precipitates was enriched on the CF surface, leading to reduced fouling on the cathode plate. The abundance of C-OH on the surface of CF is considered as the attachment site of ACP. Moreover, the effect of carbon felt on phosphorus recovery increased with the number of applications. This study presents a promising approach for NRP recovery from wastewater and facilitates low-energy resource utilization strategies for simultaneous benefits of 'pollution reduction and carbon reduction' and 'resource recovery' with one investment.

The effects of process parameters on the mechanical properties and degradation behavior of Fe/HA biodegradable materials

HA/Fe composites were prepared by powder metallurgy. The effects of ball milling time, pressing pressure, and sintering temperature on the porosity and hardness of the composites were investigated, and their mechanical properties and biocompatibility were evaluated. The results show that as the ball milling time increases (30∼60min), the average particle size initially decreases and then increases (82.91∼53.49∼77.98 μm). Additionally, an appropriate increase in pressing pressure and sintering temperature can decrease the composite's porosity and increase its hardness. When the pressing pressure is 27 KN and the sintering temperature is 1000°C, the composite material has excellent mechanical properties (hardness 268.5 Hv, compressive strength 106.736 MPa) and good in vitro biocompatibility. The hemolysis rate of the sample was 1.719518 %. When the concentration of the extract was 50 %, the cell proliferation rate could reach 136.26 %. Furthermore, the degradation properties of the composites were studied. At 12 months the corrosion rate of HA/Fe composites reached 0.3173 mm/a. It was also observed varying degradation mechanisms was different in different soaking cycles, and the dominant degradation mechanism was gradually changed from HA in the early stage to Fe in the later stage, which played a positive guiding role in the development of iron matrix composites with different degradation rates.

A composite dressing combining ultralong hydroxyapatite nanowire bio-paper and a calcium alginate hydrogel accelerates wound healing

An acute wound is the most common type of skin injury. Developing wound dressings with excellent mechanical properties, wound protection, comfort, angiogenic capacity and therapeutic effects is significant for effective treatments, yet remains challenging. Herein, we have designed a novel HAP-Alg composite dressing comprising a complementary ultralong hydroxyapatite (HAP) nanowire bio-paper and calcium alginate hydrogel. The HAP bio-paper assembled by ultralong HAP nanowires, in contrast to typical brittle HAP bio-ceramics, exhibits a highly flexible and interwoven structure to enhance the mechanical and protective performance of an alginate hydrogel, and the alginate matrix creates a moist environment for skin regeneration. Therefore, the HAP-Alg composite dressing presents good mechanical properties and high resistance to swelling and shrinkage, along with a reliable bacterial shielding ability. In addition, its moisturizing effect can deliver bioactive calcium ions to promote angiogenesis, accelerate re-epithelialization and reduce scar formation. In vitro studies reveal that the HAP-Alg composite dressing has excellent biocompatibility, promotes cell migration and angiogenesis, and enhances calcium ion influx. In vivo wound models further prove the ability of the HAP-Alg composite dressing to accelerate wound closure, enhance collagen deposition, and induce neovascularization. This work demonstrates that the HAP-Alg composite dressing offers a promising wound dressing for acute wound treatment and protection.

Functionality, physicochemical properties, and applications of chitosan/nano-hydroxyapatite-tea polyphenol films

An active chitosan (CS) film containing a nano-hydroxyapatite-tea polyphenol (HAP-TP) complex was designed and prepared. The effects of HAP-TP loading on the structural and physicochemical properties of the CS-based film were evaluated. The mechanical and thermal properties of the film were significantly improved by the resulting intermolecular interactions and formation of hydrogen bonds between HAP-TP and CS, which reduced the water vapor and oxygen permeabilities of the film by 29.78 and 35.59 %, respectively. The CS-HAP-TP film exhibited excellent slow-release behavior and antioxidant activity, with a cumulative release rate at 700 h 6.79 % lower than that of CS-TP films. The CS-HAP-TP film significantly inhibited the deterioration of semi-dried golden pompano, and thus helped to retain the taste of umami and sweet amino acids in fish samples, while reducing off-flavor generation. The film therefore shows considerable potential as an active packaging material for the preservation of semi-dried fish products.

Preparation and characterization of highly crystalline hydroxyapatite (HAp) from the scales of an anadromous fish (Tenualosa ilisha): a comparative study with the freshwater fish scale (Labeo rohita) derived HAp

Waste generation from fish processing sectors has become a significant environmental concern. This issue is exacerbated in countries with high aquaculture production and inefficient fish scale (FS) utilization. This study prepared and compared highly crystalline hydroxyapatite (HAp) from the FS of an anadromous fish, Tenualosa ilisha (I-HAp), and a freshwater fish, Labeo rohita (R-HAp). Acid-alkali treatment followed by high-temperature calcination was employed for HAp synthesis. XRD analysis indicated a monoclinic crystal structure for I-HAp and a hexagonal structure for R-HAp, with both containing β-TCP as a secondary phase. Rietveld refinement quantified β-TCP at 8% for I-HAp and 7.2% for R-HAp. Crystallite size of the samples was estimated by various methods (Scherrer's method, Scherrer equation average method, linear straight-line method, straight line passing the origin method, Monshi-Scherrer method, Halder-Wagner method, Williamson-Hall method, and size-strain plot method), consistently indicating microcrystalline HAp. FESEM and TEM analyses revealed larger particle sizes for I-HAp, confirmed by DLS measurements. Surface elemental analysis by XPS confirmed the presence of Na and Mg as impurities along with the elements of the HAp structure. FTIR and Raman spectroscopy identified expected functional groups, while EDX determined elemental composition. Both HAp samples exhibited bioactivity through apatite layer formation in simulated body fluid. Furthermore, the combined results of the cell viability and hemocompatibility studies indicate the biocompatibility of the prepared samples.

Ultrasound-triggered functional hydrogel promotes multistage bone regeneration

The dysfunction of bone mesenchymal stem cells (BMSCs), caused by the physical and chemical properties of the inflammatory and repair phases of bone regeneration, contributes to the failure of bone regeneration. To meet the spatiotemporal needs of BMSCs in different phases, designing biocompatible materials that respond to external stimuli, improve migration in the inflammatory phase, reduce apoptosis in the proliferative phase, and clear the hurdle in the differentiation phase of BMSCs is an effective strategy for multistage repair of bone defects. In this study, we designed a cascade-response functional composite hydrogel (Gel@Eb/HA) to regulate BMSCs dysfunction in vitro and in vivo. Gel@Eb/HA improved the migration of BMSCs by upregulating the expression of chemokine (C-C motif) ligand 5 (CCL5) during the inflammatory phase. Ultrasound (US) triggered the rapid release of Ebselen (Eb), eliminating the accumulation of reactive oxygen species (ROS) in BMSCs, and reversing apoptosis under oxidative stress. Continued US treatment accelerated the degradation of the materials, thereby providing Ca2+ for the osteogenic differentiation of BMSCs. Altogether, our study highlights the prospects of US-controlled intelligent system, that provides a novel strategy for addressing the complexities of multistage bone repair.

Nanoparticles and bone microenvironment: a comprehensive review for malignant bone tumor diagnosis and treatment

Malignant bone tumors, which are difficult to treat with current clinical strategies, originate from bone tissues and can be classified into primary and secondary types. Due to the specificity of the bone microenvironment, the results of traditional means of treating bone tumors are often unsatisfactory, so there is an urgent need to develop new treatments for malignant bone tumors. Recently, nanoparticle-based approaches have shown great potential in diagnosis and treatment. Nanoparticles (NPs) have gained significant attention due to their versatility, making them highly suitable for applications in bone tissue engineering, advanced imaging techniques, and targeted drug delivery. For diagnosis, NPs enhance imaging contrast and sensitivity by integrating targeting ligands, which significantly improve the specific recognition and localization of tumor cells for early detection. For treatment, NPs enable targeted drug delivery, increasing drug accumulation at tumor sites while reducing systemic toxicity. In conclusion, understanding bone microenvironment and using the unique properties of NPs holds great promise in improving disease management, enhancing treatment outcomes, and ultimately improving the quality of life for patients with malignant bone tumors. Further research and development will undoubtedly contribute to the advancement of personalized medicine in the field of bone oncology.

Green synthesis of novel Z-scheme SnS2/HAp nanocomposite using Ocimum tenuiflorum leaf extract and investigation of its photocatalytic activity

The present study focuses on the green synthesis of a novel Z-scheme SnS₂/HAp photocatalyst using Ocimum tenuiflorum (tulsi) leaf extract as a stabilizing agent. This approach not only emphasizes sustainability but also adds value to waste by extracting hydroxyapatite (HAp) from Labeo rohita fish scales, addressing the challenge of their disposal. The synthesized photocatalyst was thoroughly characterized using a range of analytical techniques to evaluate its crystal structure, optical properties, morphology, and elemental composition. The photocatalytic activity of the SnS₂/HAp composite was assessed through the degradation of gentian violet (GV) dye, a representative organic pollutant. Various reaction parameters were optimized to enhance the degradation efficiency, and the photocatalyst's performance was further tested across different water matrices. Under optimal conditions, the SnS₂/HAp photocatalyst achieved a maximum photodegradation efficiency of 97.49% with a rate constant of 0.0494 min- 1 for GV dye. Additionally, it exhibited an efficiency greater than 70% against other emerging pollutants via advanced oxidation processes (AOP). The enhanced photocatalytic activity was attributed to the formation of a Z-Scheme heterojunction between SnS2 and HAp, which enhanced the charge separation efficiency and delayed the charge recombination. The study also demonstrated the photocatalyst's remarkable reusability, maintaining high performance over five cycles and across various water environments. This highlights its potential as a sustainable solution for the removal of organic pollutants from aqueous streams. Finally, a Z-scheme electron transport mechanism is proposed to explain the photodegradation process of GV dye using the SnS₂/HAp photocatalyst.

Construction Form and Application of Three-Dimensional Bioprinting Ink Containing Hydroxyapatite

With the increasing prevalence of bone tissue diseases, three-dimensional (3D) bioprinting applied to bone tissue engineering for treatment has received a lot of interests in recent years. The research and popularization of 3D bioprinting in bone tissue engineering require bioinks with good performance, which is closely related to ideal material and appropriate construction form. Hydroxyapatite (HAp) is the inorganic component of natural bone and has been widely used in bone tissue engineering and other fields due to its good biological and physicochemical properties. Previous studies have prepared different bioinks containing HAp and evaluated their properties in various aspects. Most bioinks showed significant improvement in terms of rheology and biocompatibility; however, not all of them had sufficiently favorable mechanical properties and antimicrobial activity. The deficiencies in properties of bioink and 3D bioprinting technology limited the applications of bioinks containing HAp in clinical trials. This review article summarizes the construction forms of bioinks containing HAp and its modifications in previous studies, as well as the 3D bioprinting techniques adopted to print bioink containing HAp. In addition, this article summarizes the advantages and underlying mechanisms of bioink containing HAp, as well as its limitations, and suggests possible improvement to facilitate the development of bone tissue engineering bioinks containing HAp in the future.

Insights into the Dual Anticancer and Antibacterial Activities of Composites Based on Silver Camphorimine Complexes

Hydroxyapatite (HAp) is a widely used biocompatible material in orthopedic composite preparations. However, HAp composites that exhibit both anticancer and antibacterial activities through bioactive coordination complexes are relatively rare. To explore orthopedic applications, we blended several silver camphorimine compounds with HAp to create [Ag(I)] composites. All compounds [Ag(NO3)(L)n] (n = 1,2) based on camphorimine (LA), camphor sulfonimine (LB) or imine bi-camphor (LC) ligands demonstrated significant cytotoxic activity (IC50 = 0.30-2.6 μgAg/mL) against osteosarcoma cancer cells (HOS). Based on their structural and electronic characteristics, four complexes (1-4) were selected for antibacterial evaluation against Escherichia coli, Burkholderia contaminans, Pseudomonas aeruginosa, and Staphylococcus aureus. All complexes (1-4) revealed combined anticancer and antibacterial activities; therefore, they were used to prepare [Ag(I)]:HAp composites of 50:50% and 20:80% weight compositions and the activities of the composites were assessed. Results showed that they retain the dual anticancer and antibacterial characteristics of their precursor complexes. To replicate the clinical context of bone-filling applications, hand-pressed surfaces (pellets) were prepared. It is worth highlighting that no agglutination agent was necessary for the pellet's consistency. The biological properties of the so-prepared pellets were assessed, and the HOS cells and bacteria spreading on the pellet's surface were analyzed by SEM. Notably, composite 4B, derived from the bicamphor (LC) complex [Ag(NO3)(OC10H14N(C6H4)2NC10H14O)], exhibited significant anticancer activity against HOS cells and antibacterial activity against P. aeruginosa, fostering potential clinical applications on post-surgical OS treatment.

Biomimetic fusion: Platyper's dual vision for predicting protein-surface interactions

Predicting protein binding with the material surface still remains a challenge. Here, a novel approach, platypus dual perception neural network (Platyper), was developed to describe the interactions in protein-surface systems involving bioceramics with BMPs. The resulting model integrates a graph convolutional neural network (GCN) based on interatomic potentials with a convolutional neural network (CNN) model based on images of molecular structures. This dual-vision approach, inspired by the platypus's adaptive sensory system, addresses the challenge of accurately predicting the complex binding and unbinding dynamics in steered molecular dynamics (SMD) simulations. The model's effectiveness is demonstrated through its application in predicting surface interactions in protein-ligand systems. Notably, Platyper improves computational efficiency compared to classical SMD-based methods and overcomes the limitations of GNN-based methods for large-scale atomic simulations. The incorporation of heat maps enhances model's interpretability, providing valuable insights into its predictive capabilities. Overall, Platyper represents a promising advancement in the accurate and efficient prediction of protein-surface interactions in the context of bioceramics and growth factors.

Nanocosmos of catalysis: a voyage through synthesis, properties, and enhanced photocatalytic degradation in nickel sulfide nanocomposites

Nanomaterials play a decisive role in environmental applications such as water purification, pollutant monitoring, and advanced oxidation-based remediation processes, particularly in semiconductor and metal sulfide-based photocatalysis. Metal sulfides are ideal for photocatalysis because of their unique optical, structural, and electronic characteristics. These properties enable the effective use of solar energy to drive various catalytic reactions with potential uses in environmental remediation with sustainable energy production. Among them, nickel sulfides (NiS) stand out for their narrow band gaps, high stability, and cost-effectiveness. This review thoroughly analyzes recent advancements in employing nickel-sulfide-based nanostructures for water decontamination. It begins by addressing environmental material needs and emphasizing the properties of nickel sulfide. To improve photocatalytic performance, controlled processes that affect the active structure, shape, composition, and size of nickel sulfide photocatalysts are examined, along with their synthesis methods. The heart of the review article is a detailed analysis of the modification of NiS through metal and non-metal doping, heterojunction, and nanocomposite formation for enhanced photocatalytic performance. The discussion also includes metal-modified nanostructures, metal oxides, and carbon-hybridized nanocomposites. This study underscores notable advancements in the degradation efficiency of NiS photocatalysts, rivaling their costly noble-metal counterparts. The analysis concludes with potential future directions for nickel sulfide-based photocatalysts in sustainable environmental remediation.

Clam Shell-Derived Hydroxyapatite: A Green Approach for the Photocatalytic Degradation of a Model Pollutant from the Textile Industry

This work aims to evaluate the potential use of natural wastes (in particular, clam shells) to synthesize one of the most well-known and versatile materials from the phosphate mineral group, hydroxyapatite (HAP). The obtained material was characterized in terms of morphology and composition using several analytical methods (scanning electron microscopy-SEM, X-ray diffraction-XRD, X-ray fluorescence-XRF, Fourier transform infrared spectroscopy-FTIR, thermal analysis-TGA, and evaluation of the porosity and specific surface characteristics by the Brunauer-Emmett-Teller-BET method) in order to confirm the successful synthesis of the material and to evaluate the presence of potential secondary phases. The developed material was further doped with iron oxide (HAP-Fe) using a microwave-assisted method, and both materials were evaluated in terms of photocatalytic activity determined by the photodecomposition of methylene blue (MB) which served as a contaminant model. The best results (approx. 33% MB degradation efficiency, after 120 min. of exposure) were obtained for the hydroxyapatite material, superior to the HAP-Fe composite (approx. 27%). The utilization of hydroxyapatite obtained from clam shells underscores the importance of sustainable and eco-friendly practices in materials syntheses. By repurposing waste materials from the seafood industry, we not only reduce environmental impact, but also create a valuable resource with diverse applications, contributing to advancements in both healthcare and environmental protection.

Characterization of chitosan- and β-cyclodextrin-modified forms of magnesium-doped hydroxyapatites as enhanced carriers for levofloxacin: loading, release, and anti-inflammatory properties

An advanced form of magnesium-rich hydroxyapatite (Mg·HAP) was modified with two types of biopolymers, namely chitosan (CH/Mg·HAP) and β-cyclodextrin (CD/Mg·HAP), producing two types of bio-composites. The synthesized materials were developed as enhanced carriers for levofloxacin to control its loading, release, and anti-inflammatory properties. The polymeric modification significantly improved the loading efficiency to 281.4 mg g-1 for CH/Mg·HAP and 332.4 mg g-1 for CD/Mg·HAP compared with 218.3 mg g-1 for Mg·HAP. The loading behaviors were determined using conventional kinetic and isotherm models and mathematical parameters of new equilibrium models (the monolayer model of one energy). The estimated density of effective loading sites (Nm (LVX) = 88.03 mg g-1 (Mg·HAP), 115.8 mg g-1 (CH/Mg·HAP), and 138.5 mg g-1 (CD/Mg·HAP)) illustrates the markedly higher loading performance of the modified forms of Mg·HAP. Moreover, the loading energies (<40 kJ mol-1) in conjunction with the capacity of each loading site (n > 1) and Gaussian energies (<8 kJ mol-1) signify the physical trapping of LVX molecules in vertical orientation. The addressed materials validate prolonged and continuous release behaviors. These behaviors accelerated after the modification procedures, as the complete release was identified after 160 h (CH/Mg·HAP) and 200 h (CD/Mg·HAP). The releasing behaviors are regulated by both diffusion and erosion mechanisms, according to the kinetic investigations and diffusion exponent analysis (>0.45). The entrapping of LVX into Mg·HAP induces its anti-inflammatory properties against the generation of cytokines (IL-6 and IL-8) in human bronchial epithelia cells (NL20), and this effect displays further enhancement after the integration of chitosan and β-cyclodextrin.

Advancements in application of modified biochar as a green and low-cost adsorbent for wastewater remediation from organic dyes

Synthetic organic dyes, which are resistant to biodegradation, pose a notable health risk, potentially leading to cancer and respiratory infections. Researchers have addressed this concern by exploring physicochemical methods to remove organic dyes from wastewater. A particularly promising solution involves modified biochar adsorbents, which demonstrate high efficiency in organic dye removal. Biochar, a charcoal-like material derived from biomass pyrolysis, offers advantages such as low cost, eco-friendliness, high efficiency and reusability. Beyond its role in sustainable soil remediation, biochar proves effective in removing organic dyes from wastewater after undergoing physical or chemical modification. Acid-base activation or metal-heteroatom impregnation enhances biochar's adsorption capacity. This comprehensive review examines the attributes of biochar, common methods for production and modification, and the impacts of raw materials, pyrolysis temperature, heating rate and residence time. It further elucidates the biochar adsorption mechanism in the removal of organic dyes, assessing factors influencing efficiency, including biochar feedstock, solution pH, adsorption temperature, particle size, initial dye concentration, biochar dosage and reaction time. It explores challenges, opportunities, reusability and regeneration methods of biochar in treating organic dye wastewater. It also discusses recent advances in organic dye removal using adsorption-based biochar. The review ultimately advocates for enhancing biochar's adsorption performance through post-modification.

Multifaceted Materials for Enhanced Osteogenesis and Antimicrobial Properties on Bioplastic Polyetheretherketone Surfaces: A Review

Implant-associated infections and the increasing number of bone implants loosening and falling off after implantation have become urgent global challenges, hence the need for intelligent alternative solutions to combat implant loosening and falling off. The application of polyetheretherketone (PEEK) in biomedical and medical therapy has aroused great interest, especially because its elastic modulus close to bone provides an effective alternative to titanium implants, thereby preventing the possibility of bone implants loosening and falling off due to the mismatch of elastic modulus. In this Review, we provide a comprehensive overview of recent advances in surface modifications to prevent bone binding deficiency and bacterial infection after implantation of bone implants, starting with inorganics for surface modification, followed by organics that can effectively promote bone integration and antimicrobial action. In addition, surface modifications derived from cells and related products of biological activity have been proposed, and there is increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies against medical associated poor osseointegration and infection are discussed, with promising prospects for developing novel osseointegration and antimicrobial PEEK materials.

Chestnut-Inspired Hollow Hydroxyapatite 3D Printing Scaffolds Accelerate Bone Regeneration by Recruiting Calcium Ions and Regulating Inflammation

This study aims to overcome the drawbacks associated with hydroxyapatite (HAP) dense structures after sintering, which often result in undesirable features such as large grain size, reduced porosity, high crystallinity, and low specific surface area. These characteristics hinder osseointegration and limit the clinical applicability of the material. To address these issues, a new method involving the preparation of hollow hydroxyapatite (hHAP) microspheres has been proposed. These microspheres exhibit distinctive traits including weak crystallization, high specific surface area, and increased porosity. The weak crystallization aligns more closely with early mineralization products found in the human body and animals. Moreover, the microspheres' high specific surface area and porosity offer advantages for protein loading and facilitating osteoblast attachment. This innovative approach not only mitigates the limitations of conventional HAP structures but also holds the potential for improving the effectiveness of hydroxyapatite in biomedical applications, particularly in enhancing osseointegration. Three-dimensional printed hHAP/chitosan (CS) scaffolds with different hHAP concentration gradients were manufactured, and the physical and biological properties of each group were systematically evaluated. In vitro and in vivo experiments show that the hHAP/CS scaffold has excellent performance in bone remodeling. Furthermore, in-scaffold components, hHAP and CS were cocultured with bone marrow mesenchymal stem cells to explore the regulatory role of hHAP and CS in the process of bone healing and to reveal the cell-level specific regulatory network activated by hHAP. Enrichment analysis showed that hHAP can promote bone regeneration and reconstruction by recruiting calcium ions and regulating inflammatory reactions.

Bandgap engineering approach for synthesising photoactive novel Ag/HAp/SnS2 for removing toxic anti-fungal pharmaceutical from aqueous environment

The present work shed light on synthesising a novel ternary Z-scheme Ag/HAp/SnS2 (AHS) nano photocatalyst to degrade metronidazole (MTZ) in wastewater through H2O2-assisted AOP under natural sunlight. HAp extracted from the fish scales of rohu fish through alkaline treatment was decorated with Ag nanoparticles using ascorbic acid as a bio-reductant. Tin disulphide (SnS2) was anchored over Ag/HAp to prevent agglomeration and enhance photocatalytic activity by delaying the electron-hole recombination rate. After 45 min of irradiation, a degradation efficiency of 98.85 ± 1.86% for 15 ppm MTZ could be achieved. The performance of the prepared photocatalyst in real wastewater was investigated by introducing several metal cations and anions in the photodegradation process. The degradation products were identified by HRLCMS analysis, and the breakdown mechanism of MTZ was proposed. The present study enlightens the importance of SnS2-based photocatalysts for organic pollutant degradation under natural sunlight through an advanced oxidation process. The characterization results showed that the enhanced photodegradation efficiency of AHS is attributed to the formation of an all-solid-state Z-scheme heterojunction with Ag nanoparticles acting as charge transfer medium and as electron accumulators helping in delaying charge recombination.

Photocatalyst of manganese ferrite and reduced graphene oxide supported on activated carbon from cow bone for wastewater treatment

The present research aimed to evaluate the photocatalytic activity of manganese ferrite (M) and reduced graphene oxide (G) supported on pulverized activated carbon from cow bone waste (PAC-MG). PAC-MG was characterized by different instrumental techniques. The efficiency of PAC-MG was evaluated using solar irradiation under different conditions of photocatalyst concentration, H2O2 concentration, and pH ranges for the discoloration of methylene blue dye (MB). The synergy between the nanomaterials potentiated the photocatalytic activity, reaching 85.5% of MB discoloration when using 0.25 g L-1 of catalyst at neutral pH with no oxidant needed. Furthermore, PAC-MG demonstrated excellent stability in 6 consecutive cycles. Finally, it is expected that the present study can add value to industrial waste and contribute to the development of novel water and wastewater treatment methods, ensuring water quality for human consumption and the environment.

Reparative osteogenesis in mandible in cases of filling a bone defect with hydroxyapatite-containing osteotropic material and injecting the surrounding soft tissues with thymalin: experimental and morphological study

OBJECTIVE

Aim of the study was to identify the morphological features of reparative osteogenesis in the lower jaw bone of rats in cases of filling a bone defect with hydroxyapatite-containing osteotropic material (bone graft "Biomin GT") and injecting the surrounding soft tissues with thymalin.

PATIENTS AND METHODS

Materials and Methods: An experiment was conducted on 48 mature rats of the WAG population weighing 160-180 grams which were divided into four groups. Group 1 included 12 rats with a simulated holey defect in the lower jaw. Group 2 included 12 rats with a simulated holey defect in the lower jaw followed by its closure with hydroxyapatite-containing osteotropic material (bone graft "Biomin GT"). Group 3 included 12 rats with a simulated holey defect in the lower jaw with injecting the surrounding soft tissues with thymalin. Group 4 included 12 rats with a simulated holey defect in the lower jaw followed by its closure with hydroxyapatite-containing osteotropic material (bone graft "Biomin GT") and injecting the surrounding soft tissues with thymalin. The material for the morphological study was a fragment of the lower jaw from the area of the simulated holey defect. Histological, morphometric and statistical research methods were used.

RESULTS

Results: In this study, it was shown by the authors an activation of reparative osteogenesis in the lower jaw under conditions of simultaneous filling the bone defect with hydroxyapatite-containing osteotropic material (bone graft "Biomin GT") and injection the surrounding bone defect soft tissue with thymalin. Stimulation of reparative osteogenesis in the lower jaw of rats occurred due to rapid cleaning of the bone defect cavity from necrotic tissues and hematoma fragments; a decrease in the number of neutrophil leukocytes, an increase in the number and morphofunctional state of monocytes, macrophages, lymphocytes, cells of fibroblastic differon; balanced change (increase or decrease) in the number and morphofunctional state of bone forming osteoblasts and bone resorbing osteoclasts depending on the stage of reparative osteogenesis; activation of hematopoietic processes in lamellar bone tissue from the regenerate; activation of bone tissue mineralization processes.

CONCLUSION

Conclusions: Thymalin injection in the soft tissues surrounding the bone defect in the lower jaw, filled with hydroxyapatite-containing osteotropic material (bone graft "Biomin GT"), significantly stimulates the process of reparative osteogenesis, which makes it possible to recommend this technique in dentistry for treatment the patients with mandible bone tissue defects.

Bovine Serum Albumin - Hydroxyapatite Nanoflowers as Potential Local Drug Delivery System of Ciprofloxacin

Introduction

Hybrid nanoflowers are structures consisting of organic (enzymes, proteins, nucleic acids) and inorganic components (mostly metal phosphates) with a flower-like hierarchical structure. Novel hybrid nanoflowers based on bovine serum albumin (BSA) and hydroxyapatite (HA) were obtained and characterized. Study on BSA-HA nanoflowers as potential drug delivery system is reported for the first time.

Methods

Embedding ciprofloxacin in the structure of hybrid nanoflowers was confirmed by ATR-FTIR and thermogravimetric analysis. The inorganic phase of the nanoflowers was determined by X-ray diffraction. UV‒Vis spectroscopy was used to evaluate the release profiles of ciprofloxacin from nanoflowers in buffer solutions at pH 7.4 and 5. The agar disk diffusion method was used to study the antibacterial activity of the synthesized nanoflowers against Staphylococcus aureus and Pseudomonas aeruginosa.

Results

Bovine serum albumin - hydroxyapatite nanoflowers were obtained with diameters of ca. 1-2 µm. The kinetics of ciprofloxacin release from nanoflowers were described by the Korsmeyer-Peppas model. The antibacterial activity of the synthesized nanoflowers was demonstrated against S. aureus and P. aeruginosa, two main pathogens found in osteomyelitis.

Conclusion

The formulated nanoflowers may act as an efficient local antibiotic delivery system. Due to the use of nonhazardous, biodegradable components and benign synthesis, hybrid nanoflowers are very promising drug delivery systems that could be applied in the treatment of skeletal system infections.

Latest Research of Doped Hydroxyapatite for Bone Tissue Engineering

Bone tissue engineering has attracted great interest in the last few years, as the frequency of tissue-damaging or degenerative diseases has increased exponentially. To obtain an ideal treatment solution, researchers have focused on the development of optimum biomaterials to be applied for the enhancement of bioactivity and the regeneration process, which are necessary to support the proper healing process of osseous tissues. In this regard, hydroxyapatite (HA) has been the most widely used material in the biomedical field due to its great biocompatibility and similarity with the native apatite from the human bone. However, HA still presents some deficiencies related to its mechanical properties, which are essential for HA to be applied in load-bearing applications. Bioactivity is another vital property of HA and is necessary to further improve regeneration and antibacterial activity. These drawbacks can be solved by doping the material with trace elements, adapting the properties of the material, and, finally, sustaining bone regeneration without the occurrence of implant failure. Considering these aspects, in this review, we have presented some general information about HA properties, synthesis methods, applications, and the necessity for the addition of doping ions into its structure. Also, we have presented their influence on the properties of HA, as well as the latest applications of doped materials in the biomedical field.

Nutrient-Doped Hydroxyapatite: Structure, Synthesis and Properties

Complex inorganic powders based on calcium phosphates have found a plethora of practical applications. Of particular interest are the CaO-P2O5 system-based multi-component material powders and granules as the source of major- and micronutrients for the plants. The emerging strategy is to use nano fertilizers based on hydroxyapatite (HAP) for phosphorus and other nutrient delivery. The doping of micronutrients into HAP structure presents an interesting challenge in obtaining specific phase compositions of these calcium phosphates. Various techniques, including mechanochemical synthesis, have been employed to fabricate doped HAP. Mechanochemical synthesis is of particular interest in this review since it presents a relatively simple, scalable, and cost-effective method of calcium phosphate powder processing. The method involves the use of mechanical force to promote chemical reactions and create nanometric powders. This technique has been successfully applied to produce HAP nanoparticles alone, and HAP doped with other elements, such as zinc and magnesium. Nanofertilizers developed through mechanochemical synthesis can offer several advantages over conventional fertilizers. Their nanoscale size allows for rapid absorption and controlled release of nutrients, which leads to improved nutrient uptake efficiency by plants. Furthermore, the tailored properties of HAP-based nano fertilizers, such as controlled porosity and degradation levels, contribute to their effectiveness in providing plant nutrition.

EXPERIMENTAL AND MORPHOLOGICAL ASSESSMENT OF THE INFLUENCE OF HYDROXYAPATITE-CONTAINING OSTEOTROPIC MATERIAL AND ELECTRICAL STIMULATION ON REPARATIVE OSTEOGENESIS OF THE LOWER JAW

OBJECTIVE

Aim: The aim of the study was to reveal the peculiarities of reparative osteogenesis in experimental lower jaw defect under the conditions of hydroxyapatite-containing osteotropic material application and electrical stimulation.

PATIENTS AND METHODS

Materials and Methods: An experiment was conducted on 48 mature male rats of the WAG population. All animals were divided into 4 groups (12 animals in each group). Group 1 included rats that were not subjected to any manipulations. Group 2 included rats that were modeled with a perforated defect of the lower jaw body. Group 3 included rats that were modeled with a perforated defect similar to group 2, the cavity of which was filled with synthetic bone graft "Biomin GT" (RAPID, Ukraine). Group 4 included animals that were modeled with a perforated defect similar to groups 2-3, the cavity of which was filled with synthetic bone graft "Biomin GT". In animals of group 4, a microdevice for electrical action was implanted subcutaneously in the neck area on the side of the simulated bone defect. Morphological and statistical methods were used.

RESULTS

Results: The research carried out by the authors proved that the use of the above-mentioned bone replacement material helps to increase the regenerative potential of the bone tissue of the lower jaw, but does not lead to the formation of a full-fledged bone regenerate, as evidenced by the results of the morphometry of the regenerate (the specific volume of lamellar bone tissue accounted for 54.9%); disordered localization of bone beams, which were characterized by reduced signs of mineralization; the presence in connective, osteogenic fibroreticular and lamellar bone tissues the encapsulated bone graft granules with the presence of inflammatory cell infiltration. In cases the combined use of synthetic bone graft "Biomin GT" and electrical stimulation, the authors noted more intensive reparative osteogenesis processes in the bone defect of the lower jaw compared to cases when only one bone graft was used, but they also did not lead to the formation of a full-fledged bone regenerate.

CONCLUSION

Conclusions: The experimental and morphological study conducted by the authors proved that the use of hydroxyapatite-containing osteotropic material ("Biomin GT"), especially in cases of its combined use with electrical stimulation, significantly activates reparative osteogenesis in the bone defect of the lower jaw, which does not lead to the formation of a full-fledged bone regenerate.