Recent Advances in Copper and Copper-Derived Materials for Antimicrobial Resistance and Infection Control

Influence of Silver Doping and Anodization Current Density on Aluminum Surface Properties and Surface Adhesion of Staphylococcus aureus and Escherichia coli

In this study, we investigated the influence of crystal structure, topography, and elemental composition of aluminum oxide surfaces on bacterial adhesion. The structural properties of the surfaces were systematically controlled by varying the current density (1.5, 2.0, and 2.5 A/dm2) and silver doping during the anodization process. The resulting changes in structural and morphological properties were examined by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), contact angle measurements, and profilometry. Using FE-SEM analysis, we evaluated the adhesion of model bacteria, Escherichia coli and Staphylococcus aureus, to surfaces exhibiting diverse morphologies and elemental compositions. The surface roughness and crystal size of the aluminum oxide increased proportionally with the applied current density and silver doping. According to the XRD results, the slip plane crystal structure of (311) increased proportionally to the current density but decreased with silver doping. Specifically, while stepped atomic alignment of (311) planes facilitates bacterial attachment, smoother (200) planes reduce the adhered bacteria population. Further analysis via XPS revealed that the oxide crystal structure of undoped surfaces shifted from the tetrahedral to octahedral form with increasing current density, while silver-doped surfaces exhibited the opposite trend. Additionally, increasing current density during the preparation of silver-doped surfaces diminished the ratio of ionic silver to metallic silver, suggesting a lowered propensity for bacterial adhesion. S. aureus adhesion to undoped surfaces increased 4.46-fold for surfaces prepared at 2.5 A/dm2 compared to that at 1.5 A/dm2. Moreover, E. coli adhesion was completely inhibited on silver-doped surfaces anodized at 1.5 A/dm2. Reducing the surface roughness and incorporating silver during the anodization of aluminum surfaces decrease the number of bacteria adhering to aluminum oxide surfaces.

Efficient Water-Soluble Cu(II) Complex-Immobilized Electrospun Hydrophobic Polycaprolactone Nanofiber Composites for Highly Controlled and Long-Term Release

Water-soluble Cu complexes offer diverse applications in the biomedical field as Cu is an essential trace element for many physiological functions, including the wound healing process. Controlled delivery of such bioactive Cu complexes to the target system is a promising approach in biomedical applications. Herein, water-soluble Cu(II)-Schiff base complex-incorporated PCL nanofiber composites (PCL@C-1%, PCL@C-3%, and PCL@C-5%) were fabricated by the electrospinning process using a green solvent, acetic acid. Physicochemical properties of the resultant composite nanofibers were investigated by FE-SEM, EDS, TEM, UV-vis, FT-IR, XRD, TGA, BET, and XPS analyses. The successful incorporation of the Cu(II) complex into the PCL nanofiber was confirmed. Water contact angle (WCA) values revealed the hydrophobic nature of the PCL-composite nanofibers, which is also quite beneficial in the wound-healing process as it can create a hydrophobic barrier to prevent extra fluid absorption. To our delight, the release behavior of Cu complexes from the composite nanofibers was found to be gradual, highly controlled, and long-term release (up to 40 days). In addition, the resultant PCL composites demonstrated excellent antibacterial activity against both Gram-positive and Gram-negative bacteria. Overall, these findings provide significant insights into these Cu complex-incorporated PCL nanofiber membranes as potential antibacterial and long-term wound dressings.

The Composition of the Dispersion Medium Determines the Antibacterial Properties of Copper (II) Oxide Nanoparticles Against Escherichia coli Bacteria

Copper (II) oxide nanoparticles (CuO NPs) attract much attention as a promising antimicrobial agent. We studied the antibacterial properties of three types of CuO NPs against Escherichia coli bacteria: flake-shaped particles with a diameter of 50-200 nm and a thickness of 10-20 nm (CuO-CD synthesized by chemical deposition), spherical particles with a size of 20-90 nm (CuO-EE obtained by electrical explosion), and rod-shaped particles with a length of 100-200 nm and a diameter of 30 × 70 nm (CuO-CS commercial sample). We tested how the shape, size, and concentration of the NPs, and composition of the dispersion medium affected the properties of the CuO NPs. We prepared dispersions based on distilled water, a 0.9% NaCl solution, and the LB broth by Lennox and used Triton X-100 and sodium dodecyl sulfate (SDS) as stabilizers. The concentration of NPs was 1-100 mg L-1. We showed that the dispersion medium composition and stabilizer type had the greatest influence on the antibacterial effects of CuO NPs. We observed the maximum antibacterial effect for all CuO NP types dispersed in water without a stabilizer, as well as in LB broth with the SDS stabilizer. The maximum inhibition of culture growth was observed under the influence of CuO-EE (by 30%) and in the LB broth with the SDS stabilizer (by 1.3-1.8 times depending on the type of particles). In the saline solution, the antibacterial effects were minimal; in some cases, the CuO NPs even promoted bacterial culture growth. SDS increased the antibacterial effects of NPs in broth and saline but decreased them in water. Finally, among the particle types, CuO-CS turned out to be the most bactericidal, which is probably due to their rod-shaped morphology and small diameter. At the same time, the concentration and aggregation effects of CuO NPs in the colloidal systems we studied did not have a linear action on their antibacterial properties. These results can be used in the development of antibacterial coatings and preparations based on CuO NPs to achieve their maximum efficiency, taking into account the expected conditions of their use.

Redefining Antifungal Treatment: The Innovation of Metal-Based Compounds

Fungal infections are a significant contributor to global morbidity and mortality, particularly among immunocompromised patients. With the increasing prevalence of drug-resistant strains, it has become imperative to identify alternative approaches. Metal ion coordination enhances drug efficacy through novel modes of action and may hinder resistance mechanisms. This article aims to identify gaps in the current metal-based antifungal therapy to guide research directions and facilitate drug development. Relevant metal complexes, together with their ligands, have been categorized according to their metal coordination and their activities highlighted. Most examples reported were found to be more effective against drug-resistant strains than non-coordinated ligands, thus establishing the importance of metal ion and co-ligand(s) nature, the influence of electron-withdrawing substituents on structure-activity relationships, and the unique structural features of Schiff bases. Although still at the preclinical phase, the in vitro efficacy of these examples suggests that metal-based drugs may represent a promising approach to overcoming antifungal resistance.

Advancements in GelMA bioactive hydrogels: Strategies for infection control and bone tissue regeneration

Infectious bone defects present a significant clinical challenge, characterized by infection, inflammation, and subsequent bone tissue destruction. Traditional treatments, including antibiotic therapy, surgical debridement, and bone grafting, often fail to address these defects effectively. However, recent advancements in biomaterials research have introduced innovative solutions for managing infectious bone defects. GelMA, a three-dimensional network of hydrophilic polymers that can absorb and retain substantial amounts of water, has attracted considerable attention in the fields of materials science and biomedical engineering. Its distinctive properties, such as biocompatibility, responsiveness to stimuli, and customisable mechanical characteristics make GelMA an exemplary scaffold material for bone tissue engineering. This review aims to thoroughly explore the current literature on antibacterial and osteogenic strategies using GelMA hydrogels for the restoration of infected bones. It discusses their fabrication methods, biocompatibility, antibacterial effectiveness, and bioactivity. We conclude by discussing the existing challenges and future research directions in this field, with the hope of inspiring further innovations in the synthesis, modification, and application of GelMA-based hydrogels for infection control and bone tissue regeneration.

In Vitro and In Vivo Evaluation of rPET/Cu-Alg Nanofibers for Anti-Infective Therapy

With the growing interest in nanofibers and the urgent need to address environmental concerns associated with plastic waste, there is an increasing focus on using recycled materials to develop advanced healthcare solutions. This study explores the potential of recycled poly(ethylene terephthalate) (PET) nanofibers, functionalized with copper-enhanced alginate, for applications in wound dressings. Nanofibers with desirable antimicrobial properties were developed using chemical recycling and electrospinning techniques, offering a sustainable and effective option for managing wound infections and promoting healing. SEM and FT-IR analyses confirmed that the obtained nanofibers possess optimal physicochemical properties, including well-organized morphology, appropriate dimensions, and structural integrity. Biological evaluations revealed significant antimicrobial activity, with the materials effectively inhibiting microbial adherence and biofilm formation while maintaining good biocompatibility in both in vitro and in vivo studies. These findings highlight the potential of recycled PET-based nanofibers as advanced wound dressing materials to reduce infection risks and support tissue regeneration in clinical applications.

Copper and its isotopes: a brief overview of its implications in geology, environmental system, and human health

Copper, a malleable and ductile transition metal, possesses two stable isotopes. These copper isotopic composition data have recently found diverse applications in various fields and disciplines. In geology, copper isotopes serve as tracers that aid in investigating ore formation processes and the mechanisms of copper deposits Likewise, it has emerged as a valuable tracer in polluted environments. In plant biology, copper acts as an essential micronutrient crucial for photosynthesis, respiration, and growth. Copper isotopes contribute to understanding how plants uptake and dispense copper from the soil within their tissues. Similarly, in animals, copper serves as an essential trace element, playing a vital role in growth, white blood cell function, and enzyme activity. In humans, copper acts as an antioxidant, neutralising harmful free radicals within the body. It also helps in maintaining the nervous and immune system. Furthermore, copper isotopes find medical applications, particularly in cancer diagnostics, neurodegenerative diseases, and targeted radiotherapy. However, excessive copper can have detrimental effects in humans such as it can cause liver damage, nausea, and abdominal pain, whilst in plants it can affect the growth of plants, photosynthesis, and membrane permeability. This review emphasises the significance of copper and its isotopes in geology, the environment, and human health.

Exploring the potential of naturally occurring antimicrobials for managing orthopedic-device-related infections

Orthopedic-device-related infections (ODRIs) are challenging clinical complications that are often exacerbated by antibiotic resistance and biofilm formation. This review explores the efficacy of naturally occurring antimicrobials - including agents sourced from bacteria, fungi, viruses, animals, plants and minerals - against pathogens common in ODRIs. The limitations of traditional antibiotic agents are presented, and innovative naturally occurring antimicrobials, such as bacteriophage therapy and antimicrobial peptides, are evaluated with respect to their interaction with conventional antibiotics and antibiofilm efficacy. The integration of these natural agents into clinical practice could revolutionize ODRI treatment strategies, offering effective alternatives to conventional antibiotics and mitigating resistance development. However, the translation of these compounds from research into the clinic may require the substantial investment of intellectual and financial resources.

Antibacterial Photodynamic Therapy of the Metallosurfactant-Fluorescein Conjugate under Visible Light Illumination

Antibacterial photodynamic therapy (APDT) has received increased attention as a treatment for multidrug-resistant bacterial infections caused by antibiotic abuse. However, photosensitizers used in APDT have disadvantages such as water insolubility, self-aggregation, and photobleaching. To address these limitations, metal complexes have been explored. However, the use of such complexes tends to confine their antibacterial effectiveness specific bacterial strains. In this study, we report iron (Fe)- and copper (Cu)-based metallosurfactants as unique moieties for antibacterial photodynamic therapy (PDT) under the illumination of visible light. Briefly, our formulated Fe and Cu metallosurfactants, when combined with a fluorescein photosensitizer, exhibit nearly 100% antibacterial efficacy. This high efficiency is primarily attributed to the enhanced generation of singlet oxygen using FL in the presence of metallosurfactants when targeting bacteria such as Escherichia coli and Staphylococcus aureus under laser light. In vitro experiments further confirmed the superior antimicrobial activity of these metallosurfactants against a diverse range of microbial cultures, encompassing Gram-negative and Gram-positive bacteria as well as fungi. This performance outpaces conventional surfactants like cetyltrimethylammonium chloride and cetylpyridinium chloride. The compelling results from MTT assays and flow cytometry endorsed the substantial enhancement in antimicrobial properties achieved through Fe and Cu doping, all without the need for additional secondary agents. Notably, this synergistic antibacterial approach using metallosurfactants in PDT holds significant promise for the elimination of various bacteria in vivo, with the added advantage of mitigating the emergence of multidrug resistance.

Copper Oxide Electrochemical Deposition to Create Antiviral and Antibacterial Nanocoatings

The impact of the reaction environment on the formation of the polycrystalline layer and its biomedical (antimicrobial) applications were analyzed in detail. Copper oxide layers were synthesized using an electrodeposition technique, with varying additives influencing the morphology, thickness, and chemical composition. Scanning electron microscopy (SEM) images confirmed the successful formation of polyhedral structures. Unmodified samples (CuL) crystallized as a mixture of copper oxide (I) and (II), with a thickness of approximately 1.74 μm. The inclusion of the nonconductive polymer polyvinylpyrrolidone (PVP) during synthesis led to a regular and compact CuO-rich structure (CuL-PVP). Conversely, adding glucose resulted in forming a Cu2O-rich nanostructured layer (CuL-D(+)G). Both additives significantly reduced the sample thickness to 617 nm for CuL-PVP and 560 nm for CuL-D(+)G. The effectiveness of the synthesized copper oxide layers was demonstrated in their ability to significantly reduce the T4 phage titer by approximately 2.5-3 log. Notably, CuL-PVP and CuL-D(+)G showed a more substantial reduction in the MS2 phage titer, achieving about a 5-log decrease. In terms of antibacterial activity, CuL and CuL-PVP exhibited moderate efficacy against Escherichia coli, whereas CuL-D(+)G reduced the E. coli titer to undetectable levels. All samples induced similar reductions in Staphylococcus aureus titer. The study revealed differential susceptibilities, with Gram-negative bacteria being more vulnerable to CuL-D(+)G due to its unique composition and morphology. The antimicrobial properties were attributed to the redox cycling of Cu ions, which generate ROS, and the mechanical damage caused by nanostructured surfaces. A crucial finding was the impact of surface composition rather than surface morphology on antimicrobial efficacy. Samples with a dominant Cu2O composition exhibited potent antibacterial and antiviral properties, whereas CuO-rich materials showed predominantly enhanced antiviral activity. This research highlights the significance of phase composition in determining the antimicrobial properties of copper oxide layers synthesized through electrodeposition.

Current developments and future perspectives of nanotechnology in orthopedic implants: an updated review

Orthopedic implants are the most commonly used fracture fixation devices for facilitating the growth and development of incipient bone and treating bone diseases and defects. However, most orthopedic implants suffer from various drawbacks and complications, including bacterial adhesion, poor cell proliferation, and limited resistance to corrosion. One of the major drawbacks of currently available orthopedic implants is their inadequate osseointegration at the tissue-implant interface. This leads to loosening as a result of immunological rejection, wear debris formation, low mechanical fixation, and implant-related infections. Nanotechnology holds the promise to offer a wide range of innovative technologies for use in translational orthopedic research. Nanomaterials have great potential for use in orthopedic applications due to their exceptional tribological qualities, high resistance to wear and tear, ability to maintain drug release, capacity for osseointegration, and capability to regenerate tissue. Furthermore, nanostructured materials possess the ability to mimic the features and hierarchical structure of native bones. They facilitate cell proliferation, decrease the rate of infection, and prevent biofilm formation, among other diverse functions. The emergence of nanostructured polymers, metals, ceramics, and carbon materials has enabled novel approaches in orthopaedic research. This review provides a concise overview of nanotechnology-based biomaterials utilized in orthopedics, encompassing metallic and nonmetallic nanomaterials. A further overview is provided regarding the biomedical applications of nanotechnology-based biomaterials, including their application in orthopedics for drug delivery systems and bone tissue engineering to facilitate scaffold preparation, surface modification of implantable materials to improve their osteointegration properties, and treatment of musculoskeletal infections. Hence, this review article offers a contemporary overview of the current applications of nanotechnology in orthopedic implants and bone tissue engineering, as well as its prospective future applications.

Chelation of the Optimal Antifungal Pogostone Analogue with Copper(II) to Explore the Dual Antifungal and Antibacterial Agent

In an ongoing effort to explore more potent antifungal pogostone (Po) analogues, we maintained the previously identified 3-acetyl-4-hydroxy-2-pyrone core motif while synthesizing a series of Po analogues with variations in the alkyl side chain. The in vitro bioassay results revealed that compound 21 was the most potent antifungal analogue with an EC50 value of 1.1 μg/mL against Sclerotinia sclerotiorum (Lib.) de Bary. Meanwhile, its Cu(II) complex 34 manifested significantly enhanced antibacterial activity against Xanthomonas campestris pv campestris (Xcc) with a minimum inhibitory concentration (MIC) value of 300 μg/mL compared with 21 (MIC = 700 μg/mL). Complex 34 exhibited a striking preventive effect against S. sclerotiorum and Xcc in rape leaves, with control efficacies of 98.8% (50 μg/mL) and 80.7% (1000 μg/mL), respectively. The 3D-QSAR models generated using Topomer comparative molecular field analysis indicated that a shorter alkyl chain (carbon atom number <8), terminal rings, or electron-deficient groups on the alkyl side chain are beneficial for antifungal potency. Further, bioassay results revealed that the component of 21 in complex 34 dominated the antifungal activity, but the introduction of Cu(II) significantly enhanced its antibacterial activity. The toxicological observations demonstrated that 21 could induce abnormal mitochondrial morphology, loss of mitochondrial membrane potential, and reactive oxygen species (ROS) accumulation in S. sclerotiorum. The enzyme assay results showed that 21 is a moderate promiscuous inhibitor of mitochondrial complexes II and III. Besides, the introduction of Cu(II) to 34 could promote the disruption of the cell membrane and intracellular proteins and the ROS level in Xcc compared with 21. In summary, these results highlight the potential of 34 as a dual antifungal and antibacterial biocide for controlling rape diseases or as a promising candidate for further optimization.

Plant molecules reinforce bone repair: Novel insights into phenol-modified bone tissue engineering scaffolds for the treatment of bone defects

Bone defects have become a major cause of disability and death. To overcome the limitations of natural bone implants, including donor shortages and immune rejection risks, bone tissue engineering (BTE) scaffolds have emerged as a promising therapy for bone defects. Despite possessing good biocompatibility, these metal, ceramic and polymer-based scaffolds are still challenged by the harsh conditions in bone defect sites. ROS accumulation, bacterial infection, excessive inflammation, compromised blood supply deficiency and tumor recurrence negatively impact bone tissue cells (BTCs) and hinder the osteointegration of BTE scaffolds. Phenolic compounds, derived from plants and fruits, have gained growing application in treating inflammatory, infectious and aging-related diseases due to their antioxidant ability conferred by phenolic hydroxyl groups. The prevalent interactions between phenols and functional groups also facilitate their utilization in fabricating scaffolds. Consequently, phenols are increasingly incorporated into BTE scaffolds to boost therapeutic efficacy in bone defect. This review demonstrated the effects of phenols on BTCs and bone defect microenvironment, summarized the intrinsic mechanisms, presented the advances in phenol-modified BTE scaffolds and analyzed their potential risks in practical applications. Overall, phenol-modified BTE scaffolds hold great potential for repairing bone defects, offering novel patterns for BTE scaffold construction and advancing traumatological medicine.

Synergistic antibacterial attributes of copper-doped polydopamine nanoparticles: an insight into photothermal enhanced antibacterial efficacy

Antibiotic-resistant bacteria and associated infectious diseases pose a grave threat to human health. The antibacterial activity of metal nanoparticles has been extensively utilized in several biomedical applications, showing that they can effectively inhibit the growth of various bacteria. In this research, copper-doped polydopamine nanoparticles (Cu@PDA NPs) were synthesized through an economical process employing deionized water and ethanol as a solvent. By harnessing the high photothermal conversion efficiency of polydopamine nanoparticles (PDA NPs) and the inherent antibacterial attributes of copper ions, we engineered nanoparticles with enhanced antibacterial characteristics. Cu@PDA NPs exhibited a rougher surface and a higher zeta potential in comparison to PDA NPs, and both demonstrated remarkable photothermal conversion efficiency. Comprehensive antibacterial evaluations substantiated the superior efficacy of Cu@PDA NPs attributable to their copper content. These readily prepared nano-antibacterial materials exhibit substantial potential in infection prevention and treatment, owing to their synergistic combination of photothermal and spectral antibacterial features.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Toxicity Mechanisms of Copper Nanoparticles and Copper Surfaces on Bacterial Cells and Viruses

Copper is a metal historically used to prevent infections. One of the most relevant challenges in modern society are infectious disease outbreaks, where copper-based technologies can play a significant role. Currently, copper nanoparticles and surfaces are the most common antimicrobial copper-based technologies. Despite the widespread use of copper on nanoparticles and surfaces, the toxicity mechanism(s) explaining their unique antimicrobial properties are not entirely known. In general, toxicity effects described in bacteria and fungi involve the rupture of membranes, accumulation of ions inside the cell, protein inactivation, and DNA damage. A few studies have associated Cu-toxicity with ROS production and genetic material degradation in viruses. Therefore, understanding the mechanisms of the toxicity of copper nanoparticles and surfaces will contribute to developing and implementing efficient antimicrobial technologies to combat old and new infectious agents that can lead to disease outbreaks such as COVID-19. This review summarizes the current knowledge regarding the microbial toxicity of copper nanoparticles and surfaces and the gaps in this knowledge. In addition, we discuss potential applications derived from discovering new elements of copper toxicity, such as using different molecules or modifications to potentiate toxicity or antimicrobial specificity.

Evidence of Homeostatic Regulation in Mycobacterium avium Subspecies paratuberculosis as an Adaptive Response to Copper Stress

Background: Bacteria are capable of responding to various stressors, something which has been essential for their adaptation, evolution, and colonization of a wide range of environments. Of the many stressors affecting bacteria, we can highlight heavy metals, and amongst these, copper stands out for its great antibacterial capacity. Using Mycobacterium tuberculosis (Mtb) as a model, the action of proteins involved in copper homeostasis has been put forward as an explanation for the tolerance or adaptive response of this mycobacteria to the toxic action of copper. Therefore, the aim of this study was to confirm the presence and evaluate the expression of genes involved in copper homeostasis at the transcriptional level after challenging Mycobacterium avium subsp. paratuberculoisis (MAP) with copper ions. Methodology: Buffer inoculated with MAP was treated with two stressors, the presence of copper homeostasis genes was confirmed by bioinformatics and genomic analysis, and the response of these genes to the stressors was evaluated by gene expression analysis, using qPCR and the comparative ΔΔCt method. Results: Through bioinformatics and genomic analysis, we found that copper homeostasis genes were present in the MAP genome and were overexpressed when treated with copper ions, which was not the case with H2O2 treatment. Conclusion: These results suggest that genes in MAP that code for proteins involved in copper homeostasis trigger an adaptive response to copper ions.

Immunomodulatory Effect of Electromagnetic Field in the Treatment of Traumatic Brain Injury

A review was performed utilizing PubMed and GoogleScholar to highlight the future directions of EMF research in the setting of brain pathology, specifically in ischemic and traumatic brain injury. Additionally, a critical review of the current state-of-the art of EMF use in treating brain pathology has been conducted. The authors have added to this large body of research their own experimental studies, including a description of the on-going studies. The field of EMF utilization in the diagnosis and treatment of brain injury is highly promising and warrant careful studies in clinically relevant experimental models followed by human trials in TBI.

Effect of Reducing Agent on Characteristics and Antibacterial Activity of Copper-Containing Particles in Textile Materials

Textile materials modified with copper-containing particles have antibacterial and antiviral properties that have prospects for use in healthcare. In the study, textile materials were saturated with copper-containing particles in their entire material volume by the absorption/diffusion method. The antibacterial properties of modified textile materials were confirmed by their inhibitory effect on Staphylococcus aureus, a Gram-positive bacterium that spreads predominantly through the respiratory tract. For the modification, ordinary textile materials of various origins and fiber structures were used. Technological conditions and compositions of modifying solutions were established, as well as the most suitable textile materials for modification. To assess the morphological and physical characteristics of copper-containing particles and the textile materials themselves, X-ray diffraction, a scanning electron microscope, and an energy-dispersive X-ray spectrum were used. In modified textile samples, XRD data showed the presence of crystalline phases of copper (Cu) and copper (I) oxide (Cu2O). On the grounds of the SEM/EDS analysis, the saturation of textile materials with copper-containing particles depends on the structure of the textile materials and the origins of the fibers included in their composition, as well as the modification conditions and the copper precursor.