Effective inhibition of bacterial respiration and growth by CuO microspheres composed of thin nanosheets

Characterization of Silver Nanoparticles Synthesized Using Hypericum perforatum L. and Their Effects on Staphylococcus aureus

This study investigates the synthesis of silver nanoparticles (AgNPs) using Hypericum perforatum L. and evaluates their antibacterial and antibiofilm activities against Staphylococcus aureus. The synthesized AgNPs were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR). UV-Vis spectroscopy showed a maximum absorption peak at 448 nm, which indicates that nanoparticles have been formed successfully. TEM analysis showed that the AgNPs were spherical, with an average size of 35 ± 2.7 nm. FTIR confirmed the presence of functional groups on the surface of AgNP that may be contributing to its biological activity. The AgNPs exhibited significant antibacterial activity, with a minimum inhibitory concentration (MIC) of 75 μg/mL and an inhibition zone of 13 ± 0.13 mm at this concentration. They were also highly effective in inhibiting biofilm formation even at a concentration of 25 μg/mL, reducing biofilm formation by 47.25% ± 3.51%. At increased concentrations, nanoparticles have been shown to compromise bacterial membranes, leading to significant membrane disruption. This disruption subsequently results in a reduction of cellular respiration, with observed decreases of approximately twofold when compared to controls. Additionally, nanoparticles facilitate the production of superoxide anions, which can rise by about threefold, consequently enhancing the overall effectiveness of bacterial inactivation. Field emission scanning electron microscopy (FE-SEM) revealed structural damage to bacterial cells treated with AgNPs, supporting their antimicrobial effects. These findings suggest that AgNPs synthesized from H. perforatum could serve as effective antimicrobial agents against S. aureus. Their ability to disrupt bacterial cell membranes, inhibit respiration, and induce oxidative stress makes them promising candidates for antimicrobial and antibiofilm applications, particularly given the increasing concern over bacterial resistance to conventional antibiotics.

Adhesivity-tuned bioactive gelatin/gellan hybrid gels drive efficient wound healing

Gelatin-based hydrogels have been widely used for wound healing applications. However, increase in ligand density and reduction in pore size with increasing gelatin concentration may delay wound healing by limiting cell infiltration. In this study, we address this shortcoming by combining gelatin with gellan-which is super hydrophilic and non-adhesive to cells. We show that UV crosslinked hybrid gels composed of methacrylated gelatin (GelMA) and methacrylated gellan gum (mGG), possess considerably larger pores and improved mechanical properties compared to GelMA gels. Reduced spreading and reduced formation of focal adhesions on hybrid gels combined with lower contractility and faster detachment upon trypsin-induced de-adhesion suggests that hybrid gels are less adhesive than GelMA gels. Gradual release of fibroblast growth factor (FGF) and silver nanoparticles (AgNPs) incorporated in hybrid gels not only boosts cell migration, but also confers anti-bacterial activity against gram-positive and gram-negative bacteria at concentrations nontoxic to cells. Full thickness wound healing in Wistar rats revealed increased granulation tissue formation in hybrid gels, fastest epithelialization and highest collagen deposition in rats treated with FGF entrapped hybrid gels. Together, our results demonstrate how adhesive tuning and incorporation of bioactive factors can be synergistically combined for achieving complete wound healing.

Mechanistic study of copper oxide, zinc oxide, cadmium oxide, and silver nanoparticles-mediated toxicity on the probiotic Lactobacillus reuteri

The use of metal/metal oxide nanoparticles (NPs) in consumer products has increased dramatically. Accordingly, human exposure to these NPs has increased. Lactobacillus reuteri, a member of the beneficial gut microbiota, is essential for human health. In the present study, the toxic effect of three metal oxides (CuO, ZnO, and CdO) and one metal (Ag) NPs on L. reuteri were investigated in vitro. L. reuteri was susceptible to all the prepared NPs in a dose-dependent manner, visualized as an increase in the zones of inhibition and a significant reduction in the maximum specific growth rates (µmax). The minimal inhibitory concentrations were 5.8, 26, 560, and 560 µg/mL for CdO-, Ag-, ZnO-, and CuO-NPs, respectively, and the respective minimal bactericidal concentrations were 60, 70, 1500, and 1500 µg/mL. Electron microscopic examinations revealed the adsorption of the prepared NPs on L. reuteri cell surface, causing cell wall disruption and morphological changes. These changes were accompanied by significant leakage of cellular protein content by 214%, 191%, 112%, and 101% versus the untreated control when L. reuteri was treated with CdO-, Ag-, CuO-, and ZnO-NPs, respectively. NPs also induced oxidative damage, where the malondialdehyde level was significantly increased, and glutathione content was significantly decreased. Quantifying the DNA damage using comet assay showed that CuONPs had the maximum DNA tail length (8.2 px vs. 2.1 px for the control). While CdONPs showed the maximum percentage of DNA in tail (15.5% vs. 3.1%). This study provides a mechanistic evaluation of the NPs-mediated toxicity to a beneficial microorganism.

IAA-decorated CuO nanocarriers significantly improve Chickpea growth by increasing antioxidative activities

Plant growth regulators tagged on metallic oxide nanoparticles (NPs) may function as nanofertilizers with reduced toxicity of NPs. CuO NPs were synthesized to function as nanocarriers of Indole-3-acetic acid (IAA). Powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed 30.4 nm size of NPs and sheet-like structure, respectively, of CuO-IAA NPs. Fourier-transform infrared spectroscopy (FTIR) confirmed CuO-IAA formation. IAA-decorated CuO NPs enhanced the physiological parameters of Chickpea plants, i.e., root length, shoot length, and biomass compared to naked CuO NPs. The variation in physiological response was due to change of phytochemical contents in plants. Phenolic content increased up to 17.98 and 18.13 µgGAE/mg DW at 20 and 40 mg/L of CuO-IAA NPs, respectively. However, significant decrease in antioxidant enzymes' activity was recorded compared to control. Presence of CuO-IAA NPs increased the reducing potential of plants at higher concentration of NPs, while decrease in total antioxidant response was observed. This study concludes that IAA conjugation to CuO NPs reduces toxicity of NPs. Furthermore, NPs can be explored as nanocarriers for plant modulators and slow release in future studies.

Curcumin-Chitosan Nanocomposite Formulation Containing Pongamia pinnata-Mediated Silver Nanoparticles, Wound Pathogen Control, and Anti-Inflammatory Potential

BACKGROUND

Because of its diverse range of use in several ethics of diagnosis and care of multiple diseases, nanotechnology has seen remarkable growth and has become a key component of medical sciences. In recent years, there has been rapid advancement in medicine and biomaterials. Nanomedicine aids in illness prevention, diagnosis, monitoring, and treatment.

AIM

The purpose of this work is to evaluate the antibacterial, anti-inflammatory, and cytotoxic capabilities of green produced silver nanoparticle with the addition of curcumin-assisted chitosan nanocomposite (SCCN) against wound pathogenic as reducing agents.

MATERIALS AND METHODS

The plant extract of Pongamia pinnata, silver nanoparticles, and its based curcumin nanoformulations was studied in this study utilizing UV visible spectrophotometer, selected area electron diffraction (SAED), and TEM. Anti-inflammatory, antimicrobial, and cytotoxic tests were performed on silver nanoparticles with the addition of curcumin-assisted chitosan nanocomposite (SCCN). Furthermore, these produced nanocomposites were coated on clinical silk and tested for antibacterial activity.

RESULTS

The produced silver nanoparticle with the addition of curcumin-assisted chitosan nanocomposite (SCCN) has significant antibacterial activities against Pseudomonas aeruginosa and staphylococcus aureus. They are as well as possess anti-inflammatory activity and furthermore prove to be biocompatible.

CONCLUSION

This advancement in the field of biomaterials, which means nanocomposite, not only helps to reduce the harmful effects of pathogenic organisms while representing an environmentally benign material but it also shows to be a material with zero danger to humans and the environment.

Facile synthesis of multi-functional nano-composites by precise loading of Cu2+ onto MgO nano-particles for enhanced osteoblast differentiation, inhibited osteoclast formation and effective bacterial killing

Biomaterials with multi-functions including enhancing osteogenesis, inhibiting osteoclastogenesis and effectively removing bacteria are urgently needed in the treatment of osteoporotic bone defects. In this study, MgO nano-particles were employed as a platform for precise Cu²⁺ loading. By immersing MgO into CuSO₄ solution with a pre-defined concentration (0.1, 1 or 10 mM), 1 mg MgO adsorbed 3.25, 32.5 or 325 μg Cu²⁺ from the solution. As-synthesized nano-composites were referred as MgO-0.1Cu, MgO-1Cu or MgO-10Cu depending on the concentration of employed CuSO₄ solution. The results revealed that MgO-xCu (x = 0.1, 1 and 10) nano-composites were lamella-shaped and composed of amorphous Cu(OH)₂, crystalline Mg(OH)₂ and minor MgO. The extracellular release of Cu²⁺ was rather limited due the capture of Cu²⁺ by Mg(OH)₂. In vitro results revealed that MgO-xCu (x = 0.1, 1 and 10) nano-composites modulated osteoblast, osteoclast and bacterium response in a Cu²⁺ loading amount-dependent manner. MgO-0.1Cu nano-composite exhibited stimulatory function on osteoblast proliferation without influencing osteoblast maturation, osteoclast formation and bacterial survival. MgO-1Cu nano-composite enhanced osteoblast proliferation and differentiation, inhibited osteoclast formation and effectively killed bacteria. When larger amount of Cu²⁺ was loaded, MgO-10Cu nano-composite exhibited stronger stimulatory effect on osteoblast maturation, enhanced inhibitory function on osteoclast formation and promoted bactericidal performance, although it showed a certain degree of initial cyto-toxicity. Together, the results suggest that MgO nano-particles could be employed as potential platform for precise Cu²⁺ loading and intracellular Cu²⁺ delivery. MgO-xCu (x = 1 and 10) nano-composites are promising to be employed as multi-functional fillers in bone tissue engineering scaffolds for osteoporotic bone regeneration.

Synergistic effects of Cu-doped ZnO nanoantibiotic against Gram-positive bacterial strains

A viable hydrothermal technique has been explored for the synthesis of copper doped Zinc oxide nanoparticles (Cu-doped ZnO-NPs) based on the precursor’s mixture of Copper-II chloride dihydrate (CuCl₂.2H₂O), Zinc chloride (ZnCl₂), and potassium hydroxide (KOH). X-ray diffraction (XRD) reported the hexagonal wurtzite structure of the synthesized Cu-doped ZnO-NPs. The surface morphology is checked via field emission scanning electron microscopy (FE-SEM), whereas, the elemental compositions of the samples were confirmed by Raman, and X-ray photoelectron spectroscopy (XPS), respectively. The as-obtained ZnO-NPs and Cu-doped ZnO-NPs were then tested for their antibacterial activity against clinical isolates of Gram-positive (Staphylococcus aureus, Streptococcus pyogenes) and Gram-negative (Escherichia coli, Klebsiella pneumonia) bacteria via agar well diffusion method. The zone of inhibition (ZOI) for Cu-doped ZnO-NPs was found to be 24 and 19 mm against S. Aureus and S. pyogenes, and 18 and 11 mm against E. coli and K. pneumoniae, respectively. The synthesized Cu-doped ZnO-NPs can thus be found as a potential nano antibiotic against Gram-positive multi-drug resistant bacterial strains.

Destruction of Cell Topography, Morphology, Membrane, Inhibition of Respiration, Biofilm Formation, and Bioactive Molecule Production by Nanoparticles of Ag, ZnO, CuO, TiO2, and Al2O3 toward Beneficial Soil Bacteria

The unregulated discharge of nanoparticles (NPs) from various nanotechnology industries into the environment is expected to alter the composition and physiological functions of soil microbiota. Considering this knowledge gap, the impact of five NPs (Ag, ZnO, CuO, Al2O3, and TiO2) differing in size and morphology on growth behavior and physiological activity of Azotobacter chroococcum, Bacillus thuringiensis, Pseudomonas mosselii, and Sinorhizobium meliloti were investigated. Various biochemical and microscopic approaches were adopted. Interestingly, all bacterial strains were found sensitive to Ag-NPs and ZnO-NPs but showed tolerance toward CuO, Al2O3, and TiO2-NPs. The loss of cellular respiration due to NPs was coupled with a reduction in population size. ZnO-NPs at 387.5 μg mL-1 had a maximum inhibitory impact on A. chroococcum and reduced its population by 72%. Under Ag-NP stress, the reduction in IAA secretion by bacterial strains followed the order S. meliloti (74%) > P. mosselii (63%) > A. chroococcum (49%). The surface of bacterial cells had small- or large-sized aggregates of NPs. Also, numerous gaps, pits, fragmented, and disorganized cell envelopes were visible. Additionally, a treated cell surface appeared corrugated with depressions and alteration in cell length and a strong heterogeneity was noticed under atomic force microscopy (AFM). For instance, NPs induced cell roughness for P. mosselii followed the order 12.6 nm (control) > 58 nm (Ag-NPs) > 41 nm (ZnO-NPs). TEM analysis showed aberrant morphology, cracking, and disruption of the cell envelope with extracellular electron-dense materials. Increased permeability of the inner cell membrane caused cell death and lowered EPS production. Ag-NPs and ZnO-NPs also disrupted the surface adhering ability of bacteria, which varied with time and concentration of NPs. Conclusively, a plausible mechanism of NP toxicity to bacteria has been proposed to understand the mechanistic basis of ecological interaction between NPs and resourceful bacteria. These results also emphasize to develop strategies for the safe disposal of NPs.

Myristica fragrans bio-active ester functionalized ZnO nanoparticles exhibit antibacterial and antibiofilm activities in clinical isolates

We provide a novel one-step/one-pot bio-inspired method of synthesis for Myristica fragrans leaf ester (MFLE) capped‑zinc oxide nanoparticles (MFLE-ZnONPs). Antibacterial and antbiofilm efficacies of MFLE-ZnONPs were tested against the multi-drug resistant (MDR) Escherichia coli (E. coli-336), methicillin-resistant Staphylococcus aureus (MRSA-1) and methicillin-sensitive (MSSA-2) clinical isolates. Antibacterial screening using well diffusion assay revealed the cytotoxicity of MFLE-ZnONPs in the range of 500-2000 μg/ml. MFLE-ZnONPs significantly increased the zone of growth inhibition of E. coli-336 (17.0 ± 0.5 to 19.25 ± 1.0 mm), MSSA-2 (16.75 ± 0.8 to 19.0 ± 0.7 mm) and MRSA-1 (16.25 ± 1.0 to 18.25 ± 0.5 mm), respectively. The minimum inhibitory concentration (MIC) and minimum bactericidal concentrations (MBC) against E. coli-336, MRSA-1 and MSSA-2 were found to be 1500, 1000 and 500 μg/ml, and 2500, 2000 and 1500 μg/ml, respectively. A time and dose dependent reduction in the cell proliferation were also found at the respective MICs of tested strains. Scanning electron microscopy (SEM) of MFLE-ZnONPs-treated strains exhibited cellular damage via loss of native rod and coccoid shapes because of the formation of pits and cavities. E. coli-336 and MRSA-1 strains at their MICs (1500 and 1000 μg/ml) sharply reduced the biofilm production to 51% and 24%. The physico-chemical characterization via x-ray diffraction (XRD) ascertained the crystallinity and an average size of MFLE-ZnONPs as 48.32 ± 2.5 nm. Gas chromatography-mass spectroscopy (GC-MS) analysis of MFLE-ZnONPs unravelled the involvement of two bio-active esters (1) butyl 3-oxobut-2-yl ester and (2) α-monoolein) as surface capping/stabilizing agents. Fourier transform infrared (FTIR) analysis of MFLE and MFLE-ZnONPs showed the association of amines, alkanes, aldehydes, amides, carbonyl and amines functional groups in the corona formation. Overall, our data provide novel insights on the rapid development of eco-friendly, cost-effective bio-synthesis of MFLE-ZnONPs, showing their putative application as nano-antibiotics against MDR clinical isolates.

Copper Oxide Nanomaterials Derived from Zanthoxylum armatum DC. and Berberis lycium Royle Plant Species: Characterization, Assessment of Free Radical Scavenging and Antibacterial Activity

Copper oxide nanomaterials were synthesized by a facile sustainable biological method using two plant species (Zanthoxylum armatum DC. and Berberis lycium Royle). The formation of materials was confirmed by FT-IR, ATR, UV-visible, XRD, TEM, SEM, EDX, TGA and PL. The antibacterial activity was evaluated by agar well diffusion method to ascertain the efficacy of plant species extract and extract derived copper oxide nanomaterials against six Gram-positive bacteria namely Staphylococcus aureus, Streptococcus mutans, Streptococcus pyogenes, Corynebacterium diphtheriae, Corynebacterium xerosis, Bacillus cereus and four Gram-negative bacteria such as Klebsiella pneumonia, Escherichia coli, Pseudomonas aeruginosa and Proteus vulgaris against the standard drug, Ciprofloxacin for Gram-positive and Gentamicin for Gram-negative bacteria, respectively. In both cases, copper oxide nanomaterials were found to be sensitive in all the bacterial species. Sensitivity of copper oxide nanomaterials shows an be higher as compared to plant species extract against different bacteria. Scavenging activity of plant extracts along with nanomaterials have been accessed using previously reported protocols employing ascorbic acid as standard. Scavenging activity of copper oxide nanomaterials shows an increase with increase in concentration. The biological activity (bactericidal and scavenging efficiency) of plant derived copper oxide nanomaterials revealed that these materials can be used as potent antimicrobial agent and DPPH scavengers in industrial as well as pharmacological fields.

Antibacterial Effect of Silver Nanoparticles Synthesized Using Murraya koenigii (L.) against Multidrug-Resistant Pathogens

Development of multidrug resistance among pathogens has become a global problem for chemotherapy of bacterial infections. Extended-spectrum β-lactamase- (ESβL-) producing enteric bacteria and methicillin-resistant Staphylococcus aureus (MRSA) are the two major groups of problematic MDR bacteria that have evolved rapidly in the recent past. In this study, the aqueous extract of Murraya koenigii leaves was used for synthesis of silver nanoparticles. The synthesized MK-AgNPs were characterized using UV-vis spectroscopy, FTIR, XRD, SEM, and TEM, and their antibacterial potential was evaluated on multiple ESβL-producing enteric bacteria and MRSA. The nanoparticles were predominantly found to be spheroidal with particle size distribution in the range of 5-20 nm. There was 60.86% silver content in MK-AgNPs. Evaluation of antibacterial activity by the disc-diffusion assay revealed that MK-AgNPs effectively inhibited the growth of test pathogens with varying sized zones of inhibition. The MICs of MK-AgNPs against both MRSA and methicillin-sensitive S. aureus (MSSA) strains were 32 μg/ml, while for ESβL-producing E. coli, it ranged from 32 to 64 μg/ml. The control strain of E. coli (ECS) was relatively more sensitive with an MIC of 16 μg/ml. The MBCs were in accordance with the respective MICs. Analysis of growth kinetics revealed that the growth of all tested S. aureus strains was inhibited (∼90%) in presence of 32 μg/ml of MK-AgNPs. The sensitive strain of E. coli (ECS) showed least resistance to MK-AgNPs with >81% inhibition at 16 μg/ml. The present investigation revealed an encouraging result on in vitro efficacy of green synthesized MK-AgNPs and needed further in vivo assessment for its therapeutic efficacy against MDR bacteria.

Characteristics of an alternative antibacterial biomaterial for mouthwash in the absence of alcohol

Background/purpose

The purpose of this study was to investigate whether poly-gamma-glutamic acid (γ-PGA), a naturally derived biomaterial, was suitable as an alternative antibacterial mouthwash in the absence of alcohol.

Materials and methods

Three bacterial strains, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, were used for testing the antibacterial activity of mouthwashes. In addition, cell viability, cytotoxicity, and genotoxicity experiments were conducted for testing the toxicity of mouthwashes.

Results

We demonstrated that 10000 ppm of γ-PGA without alcohol could efficiently inhibit 99% of bacterial growth. In addition, γ-PGA did not cause any cytotoxicity or genotoxicity.

Conclusion

10000 ppm of γ-PGA in an alcohol-free mouthwash is an alternative biomaterial for mouthwashes.

Bacterial toxicity of biomimetic green zinc oxide nanoantibiotic: insights into ZnONP uptake and nanocolloid-bacteria interface

This study was aimed to fill the critical gap of knowledge regarding the interaction between green zinc oxide nanoparticles (ZnONPs) and bacterial interface. Wurtzite phase ZnONPs with a band gap energy of 3.28 eV were produced by exploiting a simple and green biosynthesis method using an inexpensive precursor of A. indica leaf extract and zinc nitrate. ZnONPs were characterized using UV-Vis spectroscopy, XRD, FTIR, SEM, EDX, DLS, TEM, and zeta-potential analysis. The primary size obtained was 26.3 nm (XRD) and 33.5 ± 6.5 nm (TEM), whereas, the secondary size was found to be 287 ± 5.2 nm with -32.8 ± 1.8 mV ζ-potential denoting the physical colloid chemistry of ZnONPs. Crystallinity and the spherical morphology of ZnONPs were also evident with some sort of particle agglomeration. ZnONPs retained plant functional groups endorsing their hydrophilic character. The antibacterial and antibiofilm activity of ZnONPs was significant (p ≤ 0.05) and the MIC/MBC against most frequent clinical isolates of Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus ranged from 0.5 to 1.0 (MIC)/1.0 to 1.5 mg ml-1 (MBC). The dissolution of ZnONPs to Zn2+ ions in a nutrient medium increased as a result of interaction with the bacterial surface and metabolites. Substantial surface binding of ZnONPs followed by intracellular uptake disrupted the cell morphology and caused obvious injury to the cell membrane. Interrupted bacterial growth kinetics, loss of cell respiration, enhanced production of intracellular ROS, and the leakage of the cytoplasmic content unequivocally suggested a strong interaction of ZnONPs with the exterior cell surface and intracellular components, eventually leading to cell death and destruction of biofilms. Overall, the results elucidated eco-friendly production of ZnONPs expressing a prominent interfacial correlation with bacteria and hence, prospecting the use of green ZnONPs as effective nanoantibiotics.

Nanotransition Materials (NTMs): Photocatalysis, Validated High Effective Sorbent Models Study for Organic Dye Degradation and Precise Mathematical Data's at Standardized Level

The present work describes the synthesis of copper oxide nanoparticles (CuONPs) via a solution process with the aim of applying the nano-adsorbent for the reduction of methylene blue (MB) dye in alkaline media. These NPs were characterized via Field emission scanning electron microscopy (FE-SEM), X-ray diffraction, high-resolution Transmission electron microscopy (TEM), and ultra violet UV-visible spectroscopy to confirm their morphology and crystalline and optical properties in order to design an adsorption-degradation process. The photocatalytic CuONPs exhibited dynamic properties, great adsorption affinity during the chemisorption process, and operated at various modes with a strong interaction between the adsorbent and the adsorptive species, and equilibrium isotherm, kinetic isotherm, and thermodynamic activities in the presence of UV light. All basic quantities, such as concentration, pH, adsorbent dose, time, and temperature, were determined by an optimization process. The best-fitted adsorption Langmuir model (R² = 0.9988) and performance, including adsorption capacity (350.87 mg/g), photocatalytic efficiency (90.74%), and degradation rate constant (Ks = 2.23 ×10-2 min-1), illustrate good feasibility with respect to sorption-reduction reactions but followed a pseudo-second-order kinetic on the adsorbent surface, reaching an equilibrium point in 80 min. The thermodynamic analysis suggests that the adsorption reaction is spontaneous and endothermic in nature. The thermodynamic parameters such as enthalpy (∆H°), entropy (∆S°), and Gibbs free energy (∆G°) give effective results to support a chemical reduction reaction at 303 K temperature. The equilibrium isotherm and kinetic and thermodynamic models with error function analysis explore the potential, acceptability, accuracy, access to adsorbents, and novelty of an unrivaled-sorption system.

Broad‐spectrum inhibitory effect of green synthesised silver nanoparticles from Withania somnifera (L.) on microbial growth, biofilm and respiration: a putative mechanistic approach

Multi‐drug resistance in pathogenic bacteria has created immense clinical problem globally. To address these, there is need to develop new therapeutic strategies to combat bacterial infections. Silver nanoparticles (AgNPs) might prove to be next generation nano‐antibiotics. However, improved efficacy and broad‐spectrum activity is still needed to be evaluated and understood. The authors have synthesised AgNPs from Withania somnifera (WS) by green process and characterised. The effect of WS‐AgNPs on growth kinetics, biofilm inhibition as well as eradication of preformed biofilms on both gram‐positive and gram‐negative pathogenic bacteria was evaluated. The authors have demonstrated the inhibitory effect on bacterial respiration and disruption of membrane permeability and integrity. It was found that WS‐AgNPs inhibited growth of pathogenic bacteria even at 16 µg/ml. At sub‐minimum inhibitory concentration concentration, there was approximately 50% inhibition in biofilm formation which was further validated by light and electron microscopy. WS‐AgNPs also eradicated the performed biofilms by varying levels at elevated concentration. The bacterial respiration was also significantly inhibited. Interaction of WS‐AgNPs with test pathogen caused the disruption of cell membrane leading to leakage of cellular content. The production of intracellular reactive oxygen species reveals that WS‐AgNPs exerted oxidative stress inside bacterial cell causing microbial growth inhibition and disrupting cellular functions.

Comparison of methods for determining the effectiveness of antibacterial functionalized textiles

Antimicrobial functionalization of textiles is important for various applications, such as protection of textile materials from decomposition, generation of more effective wound dressings, and the prevention of infections or malodors resulting from bacterial growth. In order to test the efficacy of new products, their antibacterial activity needs to be evaluated. At present, several different procedures are being used for this purpose, hindering comparisons among different studies. The present paper compares five of these assays using a sample panel of different textiles functionalized with copper (Cu) and silver (Ag) as antibacterial agents, and discusses the suitability of these methods for different analytical requirements. Bacterial viability was determined by measuring the optical density at 600 nm, a colorimetric assay based on MTT (3-[4, 5-dimethylthiazol-2-yl]-2, 5 diphenyl tetrazolium bromide) conversion, an agar diffusion assay, and colony formation, either after culturing in media containing textile samples, or after recovery from textiles soaked with bacterial suspension. All experiments were performed with a Gram-negative (Escherichia coli) and a Gram-positive (Staphylococcus warneri) model organism. In general, the results yielded by the different methods were of good comparability. To identify the most suitable test system for the particular type of antibacterial coating, several factors need to be taken into account, such as choosing appropriate endpoints for analyzing passive or active antibacterial effects, selection of relevant microorganisms, correcting for potential interference by leaching of colored textile coatings, required hands on time, and the necessary sensitivity.

Photocatalytic TMO-NMs adsorbent: Temperature-Time dependent Safranine degradation, sorption study validated under optimized effective equilibrium models parameter with standardized statistical analysis

In this paper, chemically synthesized copper oxide nanoparticles (CuO-NPs), were employed for two processes: one is photocatalytic degradation and second one adsorption for the sorption of safranine (SA) dye in an aqueous medium at pH = 12.01. The optimized analytes amount (nano-adsorbent = 0.10 g, conc. range of SA dye 56.13 ppm to 154.37 ppm, pH = 12.01, temperature 303 K) reached to equilibrium point in 80 min, which acquired for chemical adsorption-degradation reactions. The degredated SA dye data's recorded by UV-visible spectroscopy for the occurrence of TMO-NMs of CuO-NPs at anticipated period of interval. The feasible performance of CuO-NPs was admirable, shows good adsorption capacity qm = 53.676 mg g-1 and most convenient to best fitted results establish by linear regression equation, corresponded for selected kinetic model (pseudo second order (R2 = 0.9981), equilibrium isotherm models (Freundlich, Langmuir, Dubnin-Radushkevich (D-R), Temkin, H-J and Halsey), and thermodynamic parameters (∆H° = 75461.909 J mol-1, ∆S° = 253.761 J mol-1, ∆G° = -1427.93 J mol-1, Ea = 185.142 J mol-1) with error analysis. The statistical study revealed that CuO-NPs was an effective adsorbent certified photocatalytic efficiency (η = 84.88%) for degradation of SA dye, exhibited more feasibility and good affinity toward adsorbate, the sorption capacity increases with increased temperature at equilibrium point.

"Miswak" Based Green Synthesis of Silver Nanoparticles: Evaluation and Comparison of Their Microbicidal Activities with the Chemical Synthesis

Microbicidal potential of silver nanoparticles (Ag-NPs) can be drastically improved by improving their solubility or wettability in the aqueous medium. In the present study, we report the synthesis of both green and chemical synthesis of Ag-NPs, and evaluate the effect of the dispersion qualities of as-prepared Ag-NPs from both methods on their antimicrobial activities. The green synthesis of Ag-NPs is carried out by using an aqueous solution of readily available Salvadora persica L. root extract (RE) as a bioreductant. The formation of highly crystalline Ag-NPs was established by various analytical and microscopic techniques. The rich phenolic contents of S. persica L. RE (Miswak) not only promoted the reduction and formation of NPs but they also facilitated the stabilization of the Ag-NPs, which was established by Fourier transform infrared spectroscopy (FT-IR) analysis. Furthermore, the influence of the volume of the RE on the size and the dispersion qualities of the NPs was also evaluated. It was revealed that with increasing the volume of RE the size of the NPs was deteriorated, whereas at lower concentrations of RE smaller size and less aggregated NPs were obtained. During this study, the antimicrobial activities of both chemically and green synthesized Ag-NPs, along with the aqueous RE of S. persica L., were evaluated against various microorganisms. It was observed that the green synthesized Ag-NPs exhibit comparable or slightly higher antibacterial activities than the chemically obtained Ag-NPs.

Countering drug resistance, infectious diseases, and sepsis using metal and metal oxides nanoparticles: Current status

One fourth of the global mortalities is still caused by microbial infections largely due to the development of resistance against conventional antibiotics among pathogens, the resurgence of old infectious diseases and the emergence of hundreds of new infectious diseases. The lack of funds and resources for the discovery of new antibiotics necessitates the search for economic and effective alternative antimicrobial agents. Metal and metal oxide nanoparticles including silver and zinc oxide exhibit remarkable antimicrobial activities against pathogens and hence are one of the most propitious alternative antimicrobial agents. These engineered nanomaterials are approved by regulatory agencies such as USFDA and Korea's FITI, for use as antimicrobial agents, supplementary antimicrobials, food packaging, skin care products, oral hygiene, and for fortifying devices prone to microbial infections. Nevertheless, detailed studies, on molecular and biochemical mechanisms underlying their antimicrobial activity are missing. To take the full advantage of this emerging technology selective antimicrobial activity of these nanoparticles against pathogens should be studied. Optimization of these nanomaterials through functionalization to increase their efficacy and biocompatibility is also required. Urgent in vivo studies on the toxicity of nanomaterials at realistic doses are also needed before their clinical translation.

Antibacterial studies and statistical design set data of quasi zinc oxide nanostructures

The analytical techniques employed for the ZnO nanostructures, which showed potential effect on bacteria's (E. coli, S. aureus and K. pneumoniae) growth. The recorded spectra obtained at 600 nm by UV-vis spectrophotometry.

Kinetic Study on Mutagenic Chemical Degradation through Three Pot Synthesiszed Graphene@ZnO Nanocomposite

The study was taken up with the objective to synthesize graphene-zinc oxide nano particles (NPs) nanocomposite (Gr@ZnO-Nc) via In-situ synthesis method. The structural, optical, thermal, electrical and photocatalytic properties of the synthesized Gr@ZnO-Nc were studied. The characterization data confirmed that the ZnO NPs were successfully incorporated into the graphene sheets. Further, TGA/DTA results exhibited an enhanced thermal stability of the Gr@ZnO-Nc compared with the graphene. The Gr@ZnO-Nc, graphene sheets were uniformly wrapped by ZnO NPs, which can protect graphene and delay their oxidation in air. The synthesized Gr@ZnO-Nc was used for the efficient photodegradation of a carcinogenic methyl orange (MO) dye. The results exhibited promising photodegradation of the MO dye under UV light irradiation through the production of reactive oxygen species (ROS). The promising effect of Gr@ZnO-Nc on the photodegradation properties was conferred by the large surface area which increased adsorption capacity, and the strong electron transfer ability. Thus, it is encouraging to conclude that the synthesized Gr@ZnO-Nc has environmental significance with its utility in remediation in the hazardous MO dye.

Reactive oxygen species mediated bacterial biofilm inhibition via zinc oxide nanoparticles and their statistical determination

The formation of bacterial biofilm is a major challenge in clinical applications. The main aim of this study is to describe the synthesis, characterization and biocidal potential of zinc oxide nanoparticles (NPs) against bacterial strain Pseudomonas aeruginosa. These nanoparticles were synthesized via soft chemical solution process in a very short time and their structural properties have been investigated in detail by using X-ray diffraction and transmission electron microscopy measurements. In this work, the potential of synthesized ZnO-NPs (∼10–15 nm) has been assessed in-vitro inhibition of bacteria and the formation of their biofilms was observed using the tissue culture plate assays. The crystal violet staining on biofilm formation and its optical density revealed the effect on biofilm inhibition. The NPs at a concentration of 100 µg/mL significantly inhibited the growth of bacteria and biofilm formation. The biofilm inhibition by ZnO-NPs was also confirmed via bio-transmission electron microscopy (Bio-TEM). The Bio-TEM analysis of ZnO-NPs treated bacteria confirmed the deformation and damage of cells. The bacterial growth in presence of NPs concluded the bactericidal ability of NPs in a concentration dependent manner. It has been speculated that the antibacterial activity of NPs as a surface coating material, could be a feasible approach for controlling the pathogens. Additionally, the obtained bacterial solution data is also in agreement with the results from statistical analytical methods.