Multifunctional cellulases are potent, versatile tools for a renewable bioeconomy

Mechanism and improvement of yeast tolerance to biomass-derived inhibitors: A review

Lignocellulosic biomass is regarded as a potentially valuable second-generation biorefinery feedstock. Yeast has the ability to metabolize this substrate and convert it into fuel ethanol and an array of other chemical products. Nevertheless, during the pretreatment of lignocellulosic biomass, inhibitors (furanaldehydes, carboxylic acids, phenolic compounds, etc.) are generated, which impede the growth and metabolic activities of yeast cells. Consequently, developing yeast strains with enhanced tolerance to these inhibitors is a crucial technological objective, as it can significantly enhance the efficiency of lignocellulosic biorefineries. This review provides a concise overview of the process of inhibitor generation and the detrimental effects of these inhibitors on yeast. It also summarizes the current state of research on the mechanisms of yeast tolerance to these inhibitors, focusing specifically on recent advances in enhancing yeast tolerance to these inhibitors by rational and non-rational strategies. Finally, it discusses the current challenges and future research directions.

Enzymatic Characterization of a Rumen Microorganism-Derived Multifunctional Glycoside Hydrolase and Its GH26 Domain with Mannanase Activity

In this study, a novel multifunctional glycoside hydrolase (GH) with two distinct domains homologous to the GH family 5 (GH5) and family 26 (GH26) was isolated from the rumen microorganism Segatella bryantii. The heterologous expression product of this enzyme exhibited both endo-β-1,4-glucanase and endo-β-1,4-mannanase activities. Intriguingly, segmental expression studies indicated that the GH26 domain alone contributed to the β-mannanase activity, and its specific activity reached 2060 U/mg under optimal conditions (30 °C, pH 5.5). Furthermore, site-directed mutagenesis confirmed that the glutamic acid residues at positions 165 and 276 were indispensable for the catalytic activity of the GH26 domain. Collectively, a novel multifunctional GH from a symbiotic microorganism of ruminants was identified. Preliminary enzymatic characterizations of its GH26 family domain, which has independent β-mannanase activities, were determined.

Biochemical characterization of a bilfunctional endoglucanase/glucomannanase derived from mountain soil

Metagenomics is increasingly recognized as a vital technique for exploring uncultured microorganisms, with one key application being the discovery of novel enzymes for industrial use. This study identified an endoglucanase gene from soil metagenome, termed ZFEG1801, which was expressed in E. coli BL21, purified, and characterized for its biochemical properties. The 72.8 kDa recombinant protein exhibited hydrolytic activity against sodium carboxymethyl cellulose (CMC) and konjac glucomannan (KG), with activities of 12.1 U/mg and 42.1 U/mg, respectively. The enzyme displayed optimal activity at pH 5 for CMC and pH 6 for KG, with broad pH stability ranging from 5 to 9. The optimal temperature was 40 °C, and it remained thermally stable between 20 and 40 °C, retaining over 60% of its activity. The enzyme activity remained stable in the presence of most metal ions; however, CMCase activity was inhibited by Cu2+, while glucomannanase activity was inhibited by Mn2+, Fe3+, and Ca2+. The catalytic efficiency towards both substrates was reduced by addition of SDS, DMSO, ethanol, isopropanol and acetonitrile. The Vmax and Km of the purified recombinant enzyme were 106.4 μmol/L/min and 4.9 mg/mL for CMC, and 833.3 μmol/L/min and 11.1 mg/mL for KG, respectively. The dual catalytic properties of ZFEG1801, broad pH stability and resistance to additives, demonstrate its potential for use in various biomass degradation processes.

Structural and functional snapshots of a broad-specificity endoglucanase from Thermogutta terrifontis for biomass saccharification

Multifunctionality, processivity, and thermostability are critical for the cost-effective enzymatic saccharification of non-food plant biomass polymers such as β-glucans, celluloses, and xylans to generate biofuels and other valuable products. We present molecular insights into a processive multifunctional endo-1,3-1,4-β-d-glucanase (Tt_End5A) from the hyperthermophilic bacterium Thermogutta terrifontis. Tt_End5A demonstrated activities against a broad spectrum of β-polysaccharides, including barley glucan, lichenan, carboxymethyl cellulose, regenerated amorphous cellulose (RAC), Avicel, xylan, laminarin, mannan, curdlan, xanthan, and various chromogenic substrates at pH 7 and temperatures ranging from 70 to 80°C. The enzyme exhibited a high level of processivity on RAC and retained over 90% activity at 80°C for an extended period, indicating exceptional thermal stability. The 1.20 Å crystal structure of the Tt_End5A catalytic domain revealed an archetypal glycoside hydrolase family 5 (GH5) catalytic TIM-(β/α)8-barrel, supplemented with additional β-strands, elongated α-helices, and a rare cis-non-Pro (His481-cis-Ala482) peptide. A large central cleft was observed in the 3D structure, which is likely related to the enzyme's multifunctionality and processivity. The catalytic domain is preceded by a novel N-terminal multivalent carbohydrate-binding module (CBM) that enhances the enzymatic degradation of insoluble polysaccharides. Mutagenesis studies, ligand interaction analyses, and the structurally conserved positions of E329 and E448 in Tt_End5A suggest that these residues function as the proton donor and nucleophile in the catalytic mechanism. Owing to its multifunctionality and processivity, Tt_End5A can reduce the need for multiple saccharification enzymes to generate fermentable sugars from plant biomass for bioethanol production. Additionally, it holds promise for applications in the pharmaceutical, feed, and food industries.

Characterization and synergistic activity of heterologously expressed microbial-derived endoglucanase and bifunctional cellulase on wheat straw

Cellulases are divided into endoglucanase, exoglucanase, and β-glucosidase based on their catalytic activity. Eight cellulases were recombinantly expressed in Escherichia coli BL21 to investigate their effects on the enzymatic hydrolysis of wheat straw. Among them, cellulase 2006 exhibited the highest endoglucanase activity (432.25 U/mg), while Bf1 displayed superior exoglucanase and β-glucosidase activities (577.46 and 1991.63 U/mg respectively). Bioinformatic and enzymatic analyses revealed that both cellulases displayed notable thermal and pH stability. The enzyme kinetics parameters revealed that Km values for cellulases 2006 and Bf1 were 15.98 and 14.19 mg/mL, respectively, with Vmax values of 20.78 and 16.38 μmol/min/mg. In a prokaryotic co-expression system, the mixed cellulase Bf2006 exhibited endoglucanase, exoglucanase, and β-glucosidase activities (130.78, 1406.36, and 1119.25 U/mg, respectively). The enzymatic hydrolysis assay revealed that these three cellulases acted on the cellulose macromolecules in wheat straw, increasing reducing sugar content and decreasing crystallinity. Endoglucanase 2006 acted on various organic compounds rich in phenols and aromatic heterocycles, while Bf1 primarily acted on compounds containing glucose units. Bf2006 significantly affected the content of lignin, neutral detergent fiber, acid detergent fiber, and the microstructure of wheat straw, with degradation products primarily consisting of disaccharides, oligosaccharides, polysaccharides, glycosides, and other carbohydrates. This study provides theoretical guidance for the production and application of mixed cellulase Bf2006, serving as a reference for the industrial use of different cellulase types.

Comparative genomic analysis of Planctomycetota potential for polysaccharide degradation identifies biotechnologically relevant microbes

BACKGROUND

Members of the Planctomycetota phylum harbour an outstanding potential for carbohydrate degradation given the abundance and diversity of carbohydrate-active enzymes (CAZymes) encoded in their genomes. However, mainly members of the Planctomycetia class have been characterised up to now, and little is known about the degrading capacities of the other Planctomycetota. Here, we present a comprehensive comparative analysis of all available planctomycetotal genome representatives and detail encoded carbohydrolytic potential across phylogenetic groups and different habitats.

RESULTS

Our in-depth characterisation of the available planctomycetotal genomic resources increases our knowledge of the carbohydrolytic capacities of Planctomycetota. We show that this single phylum encompasses a wide variety of the currently known CAZyme diversity assigned to glycoside hydrolase families and that many members encode a versatile enzymatic machinery towards complex carbohydrate degradation, including lignocellulose. We highlight members of the Isosphaerales, Pirellulales, Sedimentisphaerales and Tepidisphaerales orders as having the highest encoded hydrolytic potential of the Planctomycetota. Furthermore, members of a yet uncultivated group affiliated to the Phycisphaerales order could represent an interesting source of novel lytic polysaccharide monooxygenases to boost lignocellulose degradation. Surprisingly, many Planctomycetota from anaerobic digestion reactors encode CAZymes targeting algal polysaccharides - this opens new perspectives for algal biomass valorisation in biogas processes.

CONCLUSIONS

Our study provides a new perspective on planctomycetotal carbohydrolytic potential, highlighting distinct phylogenetic groups which could provide a wealth of diverse, potentially novel CAZymes of industrial interest.

Supercharging carbohydrate-binding module alone enhances endocellulase thermostability, binding, and activity on cellulosic biomass

Lignocellulosic biomass recalcitrance to enzymatic degradation necessitates high enzyme loadings incurring large processing costs for industrial-scale biofuels or biochemicals production. Manipulating surface charge interactions to minimize non-productive interactions between cellulolytic enzymes and plant cell wall components (e.g., lignin or cellulose) via protein supercharging has been hypothesized to improve biomass biodegradability, but with limited demonstrated success to date. Here we characterize the effect of introducing non-natural enzyme surface mutations and net charge on cellulosic biomass hydrolysis activity by designing a library of supercharged family-5 endoglucanase Cel5A and its native family-2a carbohydrate binding module (CBM) originally belonging to an industrially relevant thermophilic microbe Thermobifida fusca . A combinatorial library of 33 mutant constructs containing different CBM and Cel5A designs spanning a net charge range of -52 to 37 was computationally designed using Rosetta macromolecular modelling software. Activity for all mutants was rapidly characterized as soluble cell lysates and promising mutants (containing mutations either on the CBM, Cel5A catalytic domain, or both CBM and Cel5A domains) were then purified and systematically characterized. Surprisingly, often endocellulases with mutations on the CBM domain alone resulted in improved activity on cellulosic biomass, with three top-performing supercharged CBM mutants exhibiting between 2-5-fold increase in activity, compared to native enzyme, on both pretreated biomass enriched in lignin (i.e., corn stover) and isolated crystalline/amorphous cellulose. Furthermore, we were able to clearly demonstrate that endocellulase net charge can be selectively fine-tuned using protein supercharging protocol for targeting distinct substrates and maximizing biocatalytic activity. Additionally, several supercharged CBM containing endocellulases exhibited a 5-10 °C increase in optimal hydrolysis temperature, compared to native enzyme, which enabled further increase in hydrolytic yield at higher operational reaction temperatures. This study demonstrates the first successful implementation of enzyme supercharging of cellulolytic enzymes to increase hydrolytic activity towards complex lignocellulosic biomass derived substrates.

Modulation of the catalytic activity and thermostability of a thermostable GH7 endoglucanase by engineering the key loop B3

The loop B3 of glycoside hydrolase family 7 (GH7) endoglucanases is confined into long and short types. TtCel7 is a thermophilic GH7 endoglucanase from Thermothelomyces thermophilus ATCC 42464 with a long loop B3. TtCel7 was distinct for the excellent thermostability (>30 % residual activity after 1-h incubation at 90 °C). The catalytic efficiency was reduced by removing the disulfide bond in loop B3 (C220A) and truncated the loop B3 (B3cut). However, B3cut exhibited improved thermostability, the remaining enzyme activity increased by 39 %-171 % compared toTtCel7 when treated at 70-90 °C for 1-h. Based on the analysis of molecular dynamics simulation, both loops B1 and A3 of B3cut swing toward the catalytic center, which contributed to the reduced cleft-space and increased structure-rigidity. Conversely, the deletion of disulfide bond resulted in a reduction of structural rigidity in C220A. Through structure-directed enzyme modulation, this study has identified two structural elements that are related to the catalysis and thermostability of TtCel7. The loop B3 of TtCel7 possibly stretches the catalytic pocket, thereby increases the openness of the catalytic tunnel and enhancing flexibility for efficient catalysis. Additionally, the disulfide bond within loop B3 serves to enhance structural stability and maintain a heightened level of activity.

Discovery of two bifunctional/multifunctional cellulases by functional metagenomics

Cellulases are widely used in industry, and the usage in bioconversion of biofuels makes cellulases more valuable. In this study, two tandem genes that encoded cellulases ZF994-1 and ZF994-2, respectively, were identified on a cosmid from a soil metagenomic library. Phylogenetic analysis indicated that ZF994-1 and ZF994-2 belonged to glycoside hydrolase family 12 (GH12), and GH3, respectively. Based on the substrate specificity analysis, the recombinant ZF994-1 exhibited weak endoglucanase activity, moderate β-1,3-glucanase and β-1,4-mannanase activities, and strong β-glucosidase activity, while the recombinant ZF994-2 exhibited moderate endoglucanase activity and strong β-glucosidase activity. More than 45% β-glucosidase activity of the recombinant ZF994-1 retained in the buffer containing 3 M glucose, indicating the good tolerance against glucose. The recombinant ZF994-2 showed high activity in the presence of metal ions and organic reagents, exhibiting potential industrial applications.

Optimization and biochemical characterization of a thermotolerant processive cellulase, PtCel1, of Parageobacillus thermoglucosidasius NBCB1

Vermicomposting involves enrichment of microorganisms that are able to resist higher temperatures and perform simultaneous degradation of lignocellulose, and therefore, such microbial communities are a potential source of cellulolytic enzymes. This study aimed to optimize the production of a processive cellulase by Parageobacillus thermoglucosidasius NBCB1 isolated from vermicompost, under submerged fermentation of rice straw and to characterize the purified enzyme for industrial suitability. Cellulase production in basal medium (7.27 IU/mg) was enhanced to 61 IU/mg by One Factor At a Time approach, which was further improved to 78.46 IU/mg by genetic algorithm based artificial neural networking. The cellulase PtCel1 purified from bacterial culture showed a molecular weight of ≈33 kD, had activity on both crystalline (305 IU/mg) and amorphous (184 IU/mg) cellulose as substrates. It had pH and temperature optima of 5.5°C and 60°C, respectively, and retained 100% activity upon preincubation at 60°C for 1 h indicating thermostability. PtCel1 was tolerant to sodium dodecyl sulfate, glucose and mannose; and the various metal chlorides, such as sodium, magnesium, calcium and zinc, acted as inducers giving 77.54%, 45.15%, 61.10%, and 169.14% augmentation of activity, respectively. Its efficiency on cellulosic substrates and robustness against aforementioned chemical and thermal environment makes it suitable for industrial applications.

The electron transport mechanism of downflow Leersia hexandra Swartz constructed wetland-microbial fuel cell when used to treat Cr(VI) and p-chlorophenol

Constructed wetland-microbial fuel cells are used to treat heavy metal and/or refractory organic wastewater. However, the electron transport mechanism of downflow Leersia hexandra constructed wetland-microbial fuel cells (DLCW-MFCs) is poorly understood when used to treat composite-polluted wastewater containing Cr(VI) and p-chlorophenol (4-CP) (C&P). In this study, metagenomics and in situ electrochemical techniques were used to investigate the electrochemical properties and the electricigens and their dominant gene functions. The DLCW-MFC was used to treat C&P and single-pollutant wastewater containing Cr(VI) (SC) and 4-CP (SP). The results showed that C&P had a higher current response and charge transfer capability and lower solution resistance plus charge transfer resistance. The anode bacteria solution of C&P contained more electron carriers (RF, FMN, FAD, CoQ10, and Cyt c). Metagenomic sequencing indicated that the total relative abundance of the microorganisms associated with electricity production (Desulfovibrio, Pseudomonas, Azospirillum, Nocardia, Microbacterium, Delftia, Geobacter, Acinetobacter, Bacillus, and Clostridium) was the highest in C&P (4.24%). However, Microbacterium was abundant in SP (0.12%), which exerted antagonistic effects on other electricigens. Among the 10 electricigens based on gene annotation, C&P had a higher overall relative abundance of the Unigene gene annotated to the KO pathway and CAZy level B compared with SC and SP, which were 1.31% and 0.582% respectively. Unigene153954 (ccmC), Unigene357497 (coxB), and Unigene1033667 (ubiG) were related to the electron carrier Cyt c, electron transfer, and CoQ biosynthesis, respectively. These were annotated to Desulfovibrio, Delftia, and Pseudomonas, respectively. Unigene161312 (AA1) used phenols and other substrates as electron donors and was annotated to Pseudomonas. Other functional carbohydrate enzyme genes (e.g., GT2, GT4, and GH31) used carbohydrates as donors and were annotated to other electricigens. This study provides a theoretical basis for electron transfer to promote the development of CW-MFCs.

(Magnetic) Cross-Linked Enzyme Aggregates of Cellulase from T. reesei: A Stable and Efficient Biocatalyst

Cross-linked enzyme aggregates (CLEAs) represent an effective tool for carrier-free immobilization of enzymes. The present study promotes a successful application of functionalized magnetic nanoparticles (MNPs) for stabilization of cellulase CLEAs. Catalytically active CLEAs and magnetic cross-linked enzyme aggregates (mCLEAs) of cellulase from Trichoderma reesei were prepared using glutaraldehyde (GA) as a cross-linking agent and the catalytic activity and stability of the CLEAs/mCLEAs were investigated. The influence of precipitation agents, cross-linker concentration, concentration of enzyme, addition of bovine serum albumin (BSA), and addition of sodium cyanoborohydride (NaBH₃CN) on expressed activity and immobilization yield of CLEAs/mCLEAs was studied. Particularly, reducing the unsaturated Schiff's base to form irreversible linkages is important and improved the activity of CLEAs (86%) and mCLEAs (91%). For increased applicability of CLEAs/mCLEAs, we enhanced the activity and stability at mild biochemical process conditions. The reusability after 10 cycles of both CLEAs and mCLEAs was investigated, which retained 72% and 65% of the initial activity, respectively. The thermal stability of CLEAs and mCLEAs in comparison with the non-immobilized enzyme was obtained at 30 °C (145.65% and 188.7%, respectively) and 50 °C (185.1% and 141.4%, respectively). Kinetic parameters were determined for CLEAs and mCLEAs, and the K_M constant was found at 0.055 ± 0.0102 mM and 0.037 ± 0.0012 mM, respectively. The maximum velocity rate (V_max) was calculated as 1.12 ± 0.0012 µmol/min for CLEA and 1.17 ± 0.0023 µmol/min for mCLEA. Structural characterization was studied using XRD, SEM, and FT-IR. Catalytical properties of immobilized enzyme were improved with the addition of reducent NaBH₃CN by enhancing the activity of CLEAs and with addition of functionalized aminosilane MNPs by enhancing the activity of mCLEAs.

Insight into CAZymes of Alicyclobacillus mali FL18: Characterization of a New Multifunctional GH9 Enzyme

In the bio-based era, cellulolytic and hemicellulolytic enzymes are biocatalysts used in many industrial processes, playing a key role in the conversion of recalcitrant lignocellulosic waste biomasses. In this context, many thermophilic microorganisms are considered as convenient sources of carbohydrate-active enzymes (CAZymes). In this work, a functional genomic annotation of Alicyclobacillus mali FL18, a recently discovered thermo-acidophilic microorganism, showed a wide reservoir of putative CAZymes. Among them, a novel enzyme belonging to the family 9 of glycosyl hydrolases (GHs), named AmCel9, was identified; in-depth in silico analyses highlighted that AmCel9 shares general features with other GH9 members. The synthetic gene was expressed in Escherichia coli and the recombinant protein was purified and characterized. The monomeric enzyme has an optimal catalytic activity at pH 6.0 and has comparable activity at temperatures ranging from 40 °C to 70 °C. It also has a broad substrate specificity, a typical behavior of multifunctional cellulases; the best activity is displayed on β-1,4 linked glucans. Very interestingly, AmCel9 also hydrolyses filter paper and microcrystalline cellulose. This work gives new insights into the properties of a new thermophilic multifunctional GH9 enzyme, that looks a promising biocatalyst for the deconstruction of lignocellulose.