How is a micelle formed from amphiphilic polymers in a dialysis process: Insight from mesoscopic studies

Current insights into polymeric micelles for nasal drug delivery

INTRODUCTION

The nasal administration route has gained peak interest in recent literature and as a noninvasive alternative for efficient drug delivery and increasing bioavailability of active substances. Technological challenges arise from the drug's physicochemical properties and the nasal mucosal barrier for which innovative particle engineering techniques must be implemented, such as using polymeric nanocarriers.

AREAS COVERED

This review deals with the importance of the nasal administration route and its connection to polymeric micelles as innovative nanocarriers. The period between 2015-2025 up to date was chosen to search for original research articles where polymeric micelles were applied nasally. The first part demonstrates the utilization of polymeric micelles, followed by a summary of how drug release and permeability can be achieved in the nasal cavity and through the nasal epithelium. The second part reviews the studies conducted on this matter.

EXPERT OPINION

The nasal route could be superior to perform as a suitable alternative to conventional routes. Multiple studies have already demonstrated that the main advantages lie in the nose-to-brain drug delivery pathway, which can be conquered via adequately formulated polymeric micelles. As an innovative solution, vaccine delivery is also of great potential by combining the advantages of the delivery route and the polymeric nanocarriers.

Crystallization of supersaturated PEG-b-PLA for the production of drug-loaded polymeric micelles

In this study, we propose the "crystallization from supersaturated solution" method for producing drug-loaded polymeric micelles. This method involves the formation of solid drug-encapsulating crystals of a diblock copolymer through isothermal crystallization from a supersaturated solution of the copolymer in low molecular weight PEGs containing the drug, followed by dissolution of the crystals to obtain drug-loaded micelles. We fabricated and characterized micelles loaded with several model drugs (paclitaxel, rapamycin, and docetaxel) and their oligo(lactic acid)8-prodrugs using PEG4kDa-b-PLA2.2kDa as the micelle-forming copolymer and PEGs of varying molecular weights (200, 400, and 600 Da) as solvents. Our findings indicate that the molecular weight of the solvent PEG and the target drug loading significantly influence the physicochemical properties of the resulting micelles, including loading efficiency and particle size distribution. Micelles produced with PEG200 as the solvent exhibited the highest loading efficiency, followed by those made with PEG600 and PEG400 for all the drugs and prodrugs tested. Increasing the target drug loading enhanced both the loading efficiency and average particle size across all formulations. Furthermore, prodrug-loaded micelles showed higher loading efficiency and improved stability in aqueous solutions compared to their parent drug counterparts. Crystals encapsulating both parent drugs and prodrugs could be stored at room temperature for extended periods, producing micelles with no significant differences in loading efficiency and particle size distribution compared to freshly prepared micelles. Additionally, the crystals demonstrated a rapid dissolution rate, forming uniform micelles after just 5 s of hydration and agitation. Cytotoxicity studies against 4 T1 and MDA-MB-231 breast cancer cell lines revealed that the molecular weight of the PEG used as the solvent impacts the cytotoxicity of the resulting micelles, with those produced using PEG200 displaying the highest cytotoxicity, followed by PEG400 and PEG600. Overall, the crystallization from supersaturated solution method proves to be an effective platform for prolonged storage and rapid formation of stable, drug-loaded polymeric micelles. It has the potential to eliminate the need for freeze-drying in the formulation and storage of drug-loaded polymeric micelles. These findings highlight the method's potential for advancing drug delivery systems, particularly for the solubilization of hydrophobic drugs using micellar formulations.

Biosurfactant-amphiphilized hyaluronic acid: A dual self-assembly anticancer nanoconjugate and drug vector for synergistic chemotherapy

Novel amphiphilic nanoconjugates of hyaluronic acid (HA), 50 kDa (HA50) and 100 kDa (HA100), and the lipopeptide biosurfactant surfactin (SF) were developed for potential anticancer applications. Physicochemical characterization indicated the formation of an ester conjugate (HA: SF molar ratio 1: 40) with the HA50-SF derivative exhibiting higher degree of substitution, hydrolytic stability, and surface activity. Self-assembly resulted in nanomicelles with smaller size and greater negative charge relative to SF micelles. Biological data demonstrated distinct anticancer activity of HA50-SF which displayed greater synergistic cytotoxicity and selectivity for MDA-MB 231 and MCF-7 breast cancer cells alongside greater modulation of apoptosis-related biomarkers leading to apoptosis. As bioactive vector for chemotherapeutic agents, the selected HA50-SF nanoconjugate efficiently (70 %) entrapped berberine (BER) producing a sustained release BER-HA50-SF synergistic anticancer nanoformulation. Lactoferrin (Lf) coating for dual HA/Lf targeting endowed Lf/BER-HA50-SF with significantly greater selectivity for both cell lines. A murine Ehrlich breast cancer model provided evidence for the efficacy and safety of Lf/BER-HA50-SF via tumoral, histological, immunohistochemical, molecular and systemic toxicity assessments. Thus, HA-SF nanoconjugates integrating the HA and SF properties and biofunctionalties present a novel biopolymer-biosurfactant platform of benefit to oncology nanomedicine and possibly other applications.

Rational Understanding of Loading and Release of Doxorubicin by UV-Light- and pH-Responsive Poly(NIPAM-co-SPMA) Micelle-like Aggregates

A deep understanding of the interactions between micelle-like aggregates and antineoplastic drugs is paramount to control their adequate delivery. Herein, Poly(NIPAM-co-SPMA) copolymer nanocarriers were synthesized according to our previous published methodology, and the loading and release of poorly and highly water-soluble doxorubicin forms (Dox and Dox-HCl, respectively) were evaluated upon UV light irradiation and pH-variation stimuli. Capillary electrophoresis (CE) coupled to a fluorescence detector (LIF) allowed us to specifically characterize these systems and deeply study the loading and release processes. For this purpose, varying concentrations of doxorubicin were tested, and the loading/release rates were indirectly quantified thanks to the "free" doxorubicin concentration in solution. This study highlighted that Dox loading (9.4 μg/mg) was more effective than Dox-HCl loading (5.5 μg/mg). In contrast, 68 and 74% of Dox-HCl were respectively released after 2 min upon pH variation (from 7.4 to 6.0) and combined UV + pH 6.0 stimuli, while only 27% of Dox was invariably released upon application of the same stimuli. These results are coherent with the characteristics of both DoxHCl and Dox: Electrostatic interactions between Dox-HCl and the micelle-membrane structure (NIPAM) seemed predominant, while hydrophobic interactions were expected between Dox and the SP moieties at the inner part of the micelle-like aggregate, leading to different behaviors in both loading and release of the two doxorubicin forms. For doxorubicin loading concentrations higher than 3 μM, the electrophoretic profiles presented an additional peak. Thanks to CE characterizations, this peak was attributed to the formation of a complex formed between the nonaggregated copolymer and the doxorubicin molecules. This report therefore undergoes deep characterization of the dynamic formation of different micelle/drug complexes involved in the global drug-delivery behavior and therefore contributes to the development of more effective stimuli-responsive nanocarriers.

Production of paclitaxel-loaded PEG-b-PLA micelles using PEG for drug loading and freeze-drying

A new approach named PEG-assist is introduced for the production of drug-loaded polymeric micelles. The method is based on the use of PEG as the non-selective solvent for PEG-b-PLA in the fabrication procedure. Both hydration temperature and PEG molecular weight are shown to have a significant effect on the encapsulation efficiency of PTX in PEG_4kDa-b-PLA_2kDa micelles. The optimal procedure for fabrication includes the use of PEG_1kDa as the solvent at 60 °C, cooling the mixture to 40 °C, hydration at 40 °C, freezing at -80 °C and freeze-drying at -35 °C, 15 Pa. No significant difference (p > 0.05) in PTX encapsulation, average particle size and polydispersity index is observed between the samples before freeze-drying and after reconstitution of the freeze-dried cake. The prepared PTX formulations are stable at room temperature for at least 8 h. Scaling the batch size to 25× leads to no significant change (p > 0.05) in PTX encapsulation, average particle size and polydispersity index. PEG-assist method is applicable to other drugs such as 17-AAG, and copolymers of varied molecular weights. The use of no organic solvent, simplicity, cost-effectiveness, and efficiency makes PEG-assist a very promising approach for large scale production of drug-loaded polymeric micelles.

Advancements in redox-sensitive micelles as nanotheranostics: A new horizon in cancer management

World Health Organisation (WHO) delineated cancer as one of the foremost reasons for mortality with 10 million deaths in the year 2020. Early diagnosis and effective drug delivery are of utmost importance in cancer management. The entrapment of both bio-imaging dyes and drugs will open novel avenues in the area of tumor theranostics. Elevated levels of reactive oxygen species (ROS) and glutathione (GSH) are the characteristic features of the tumor microenvironment (TME). Researchers have taken advantage of these specific TME features in recent years to develop micelle-based theranostic nanosystems. This review focuses on the advantages of redox-sensitive micelles (RSMs) and supramolecular self-assemblies for tumor theranostics. Key chemical linkers employed for the tumor-specific release of the cargo have been discussed. In vitro characterisation techniques used for the characterization of RSMs have been deliberated. Potential bottlenecks that may present themselves in the bench-to-bedside translation of this technology and the regulatory considerations have been deliberated.

DPD Modelling of the Self- and Co-Assembly of Polymers and Polyelectrolytes in Aqueous Media: Impact on Polymer Science

This review article is addressed to a broad community of polymer scientists. We outline and analyse the fundamentals of the dissipative particle dynamics (DPD) simulation method from the point of view of polymer physics and review the articles on polymer systems published in approximately the last two decades, focusing on their impact on macromolecular science. Special attention is devoted to polymer and polyelectrolyte self- and co-assembly and self-organisation and to the problems connected with the implementation of explicit electrostatics in DPD numerical machinery. Critical analysis of the results of a number of successful DPD studies of complex polymer systems published recently documents the importance and suitability of this coarse-grained method for studying polymer systems.

Synthesis, Hydrophilicity and Micellization of Coil-Brush Polystyrene-b-(polyglycidol-g-polyglycidol) Copolymer-Comparison with Linear Polystyrene-b-polyglycidol

In this paper, an original method of synthesis of Coil-Brush amphiphilic polystyrene-b-(polyglycidol-g-polyglycidol) (PS-b-(PGL-g-PGL)) block copolymers was developed. The hypothesis that their hydrophilicity and micellization can be controlled by polyglycidol blocks architecture was verified. The research enabled comparison of behavior in water of PS-b-PGL copolymers and block-brush copolymers PS-b-(PGL-g-PGL) with similar composition. The Coil-Brush copolymers were composed of PS-b-PGL linear core with average DPn of polystyrene 29 and 13 of polyglycidol blocks. The DPn of polyglycidol side blocks of coil-b-brush copolymers were 2, 7, and 11, respectively. The copolymers were characterized by 1H and 13C NMR, GPC, and FTIR methods. The hydrophilicity of films from the linear and Coil-Brush copolymers was determined by water contact angle measurements in static conditions. The behavior of Coil-Brush copolymers in water and their critical micellization concentration (CMC) were determined by UV-VIS using 1,6-diphenylhexa-1,3,5-trien (DPH) as marker and by DLS. The CMC values for brush copolymers were much higher than for linear species with similar PGL content. The results of the copolymer film wettability and the copolymer self-assembly studies were related to fraction of hydrophilic polyglycidol. The CMC for both types of polymers increased exponentially with increasing content of polyglycidol.

Advances in self-assembling of pH-sensitive polymers: A mini review on dissipative particle dynamics

Dissipative Particle Dynamics (DPD) is a mesoscopic simulation program used to simulate the behavior of complex fluids. This work systematically reviews the use of DPD to simulate the self-assembly process of pH-sensitive drug-loaded nanoparticles. pH-sensitive drug-loaded nanoparticles have the characteristics of good targeting and slow release in the body, which is an ideal method for treating cancer and other diseases. As an excellent simulation method, DPD can help people explore the loading and release laws of drugs with complex molecular structures and has extensive applications in other medical fields. This article reviews the self-assembly process of pH-sensitive polymers under neutral conditions and explores the factors that affect the self-assembly structure. It points out that different hydrophilic-hydrophobic ratios, molecular structures, and component distributions will affect the morphology, stability and drug carrying capacity of micelles. This article also introduces the release mechanism of the drug in detail and introduces the factors that affect the release. This article can help relevant researchers to follow the latest advances in the DPD simulation and pH-sensitive drug nano-carrier and insight people to investigate the further application of DPD simulation in biomedical science.

Mesoscopic Simulation for the Effect of Cross-Linking Reactions on the Drug Diffusion Properties in Microneedles

The drug diffusion issue in microneedles is the focus of its medical application. It will not only affect the distribution of drugs in the needle body but will also have an impact on the drug release performance of the microneedle. The utilization of cross-linked polymer materials to obtain the drug diffusion control has been experimentally verified as a feasible method. However, the mechanism research on the molecular level is still incomplete. In this study, the dissipative particle dynamics (DPD) simulation has been applied to study the effect of the cross-linking reaction on drug diffusion in hyaluronic acid microneedles. We have discovered that when the cross-linking degree reaches 90%, the diffusion coefficient of the drug is 6.45 times lower than that of the uncross-linked system. The main reason for the decline in drug diffusion ability is that the cross-linking reaction varies the conformation of the polymer. The amplification in the cross-linking degree makes the polymer coils more compact and approach each other, finally forming a continuously distributed cross-linked network, which reduces its degradation rate in the body. Simultaneously, these cross-linked networks can also hinder the interaction of soluble drugs with water, thereby preventing the premature release of drugs. The simulation results are consistent with the data collected in the previous microneedle experiment. This work will be an extension of DPD simulation in the application of biological materials.

Harnessing amphiphilic polymeric micelles for diagnostic and therapeutic applications: Breakthroughs and bottlenecks

Amphiphilic block copolymers are widely utilized in the design of formulations owing to their unique physicochemical properties, flexible structures and functional chemistry. Amphiphilic polymeric micelles (APMs) formed from such copolymers have gained attention of the drug delivery scientists in past few decades for enhancing the bioavailability of lipophilic drugs, molecular targeting, sustained release, stimuli-responsive properties, enhanced therapeutic efficacy and reducing drug associated toxicity. Their properties including ease of surface modification, high surface area, small size, and enhanced permeation as well as retention (EPR) effect are mainly responsible for their utilization in the diagnosis and therapy of various diseases. However, some of the challenges associated with their use are premature drug release, low drug loading capacity, scale-up issues and their poor stability that need to be addressed for their wider clinical utility and commercialization. This review describes comprehensively their physicochemical properties, various methods of preparation, limitations followed by approaches employed for the development of optimized APMs, the impact of each preparation technique on the physicochemical properties of the resulting APMs as well as various biomedical applications of APMs. Based on the current scenario of their use in treatment and diagnosis of diseases, the directions in which future studies need to be carried out to explore their full potential are also discussed.

Recent advances in peptide-targeted micelleplexes: Current developments and future perspectives

The decoding of the human genome revolutionized the understanding of how genetics influence the interplay between health and disease, in a multidisciplinary perspective. Thus, the development of exogenous nucleic acids-based therapies has increased to overcome hereditary or acquired genetic-associated diseases. Gene drug delivery using non-viral systems, for instance micelleplexes, have been recognized as promising options for gene-target therapies. Micelleplexes are core-shell structures, at a nanometric scale, designed using amphiphilic block copolymers. These can self-assemble in an aqueous medium, leading to the formation of a hydrophilic and positively charged corona - that can transport nucleic acids, - and a hydrophobic core - which can transport poor water-soluble drugs. However, the performance of these types of carriers usually is hindered by several in vivo barriers. Fortunately, due to a significant amount of research, strategies to overcome these shortcomings emerged. With a wide range of structural features, good stability against proteolytic degradation, affordable characteristic, easy synthesis, low immunogenicity, among other advantages, peptides have increasingly gained popularity as target ligands for non-viral carriers. Hence, this review addresses the use of peptides with micelleplexes illustrating, through the analysis of in vitro and in vivo studies, the potential and future perspectives of this combination.

Assessing the pharmacokinetics and toxicology of polymeric micelle conjugated therapeutics

Introduction: Analogous to nanocarriers such as nanoparticles, liposomes, nano lipoidal carriers, niosomes, and ethosomes, polymeric micelles have gained significance in the field of drug delivery. They have attracted scientists worldwide by their nanometric size, wide range of polymers available for building block synthesis, stability and potential to enhance the targeting and safety of drugs. Incorporation of drugs within the interior of polymeric micelles alters the drug pharmacokinetics, which generally results in increased efficiency.Areas covered: This review deals with the pharmacokinetics of various anti-neoplastic drugs loaded into micelles. The structure of polymeric micelles, polymers employed in their development and techniques involved will be discussed. This is followed by discussion on the pharmacokinetics of anti-cancer drugs loaded into polymeric micelles and the toxicity concerns associated.Expert opinion: Polymeric micelles are nanometeric carriers, with higher stability, polymeric flexibility and higher drug loading of poorly water-soluble drugs. These nanosystems help in increasing the bioavailability of drugs by encapsulating them within the hydrophobic core. The proper selection and design of the amphiphilic polymer for micelles is a crucial step as it decides the toxicity and the biocompatibility.