Simultaneous removal of copper(II), lead(II), zinc(II) and cadmium(II) from aqueous solutions by multi-walled carbon nanotubes

Ultrasound-assisted synthesis of biomass-derived carbon-supported binary metal oxides for efficient adsorption of heavy metals from wastewater

Heavy metal contamination in water sources remains a critical environmental issue, primarily due to industrial activities, in terms of its continuous contribution to pollution through non-compliance and illegal discharge. This study presents an innovative biochar-supported binary metal oxide composite (nickel oxide (NiO) and cobalt oxide (CoO) nanoparticles) synthesized via ultrasound-assisted techniques for efficient adsorption of Zn(ii) and Cd(ii) ions from wastewater. By utilizing solid residues and leveraging ultrasound technology, this approach aligns with the principles of green chemistry due to utilization of a renewable biomass-based source, enhancing energy efficiency in the synthesis process, and minimizing waste production. Thereby a sustainable and innovative route for material development is explicitly demonstrated. Structural and morphological characterizations confirm the uniform integration of Nickel oxide (NiO) and cobalt oxide (CoO) particles into the biochar matrix, leading to maximum adsorption capacities of 18.9 mg g-1 for Zn(ii) and 10.2 mg g-1 for Cd(ii). The adsorption process follows a chemisorptive monolayer mechanism, as demonstrated by kinetic and isotherm studies, and is thermodynamically confirmed to be endothermic and spontaneous. The material also exhibits excellent reusability over five adsorption-desorption cycles. By integrating sustainable resources with innovative synthesis techniques, this work contributes to advancing wastewater remediation technologies while supporting global sustainability initiatives.

Multi-walled carbon nanotubes affect yield, antioxidant response, and rhizosphere microbial community of scented rice under combined cadmium-lead (Cd-Pb) stress

Rice production is threatened by heavy metal stress. The use of multi-walled carbon nanotubes (MWCNTs) in agriculture has been reported in previous studies. We aimed to quantify the impact of MWCNTs on the growth and physiological characteristics of scented rice under cadmium (Cd) and lead (Pb) stresses. Therefore, a pot experiment was conducted, two scented rice varieties Yuxiangyouzhan and Xiangyaxiangzhan were used as materials grown under different concentrations of MWCNTs (0, 100, and 300 mg kg-1 recorded as CK, CNPs100, and CNPs300, respectively). The yield, antioxidant response, and rhizosphere microbial community of scented rice were studied. The results showed that compared with the CK treatment, the CNPs100 and CNPs300 treatments increased leaf dry weight by 17.95%-56.22% at the heading stage, and the H2O2 content in leaves decreased significantly by 36.64%-42.27% at the maturity stage. Under CNPs100 treatment, the grain yield of two scented rice varieties increased significantly by 17.54% and 27.40%, respectively. The MWCNTs regulated the distribution of the Cd and Pb in different plant tissues. The content of Cd (0.11-0.20 mg kg-1) and Pb (0.01-0.04 mg kg-1) in grain were at a safety level (<0.2 mg kg-1). Moreover, MWCNTs increased soil microbial community abundance and altered community composition structure under Cd-Pb stress, which in turn improved agronomic traits and quality of scented rice. Overall, this study suggested that the application of MWCNTs regulates the growth, yield, physiological response, and soil microbial community, the genotypes response effect of scented rice to MWCNTs is needed further studied.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Bioinspired Synthesis of Silver Nanoparticles for the Remediation of Toxic Pollutants and Enhanced Antibacterial Activity

This research presents a novel and environmentally friendly approach for the synthesis of multifunctional nanobiocomposites for the efficient removal of toxic heavy metal and dye, as well as the disinfection of wastewater microorganisms. The nanobiocomposites (KAC-CS-AgNPs) were prepared by incorporating photochemically generated silver nanoparticles (AgNPs) within a chitosan (CS)-modified, high-surface-area activated carbon derived from kenaf (KAC), using a unique self-activation method. The even distribution of AgNPs was visible in the scanning electron microscopy images and a Fourier transform infra red study demonstrated major absorption peaks. The experimental results revealed that KA-CS-AgNPs exhibited exceptional adsorption efficiency for copper (Cu²⁺), lead (Pb²⁺), and Congo Red dye (CR), and showed potent antibacterial activity against Staphylococcus aureus and Escherichia coli. The maximum adsorption capacity (mg g^-1) of KAC-CS-AgNPs was 71.5 for Cu²⁺, 72.3 for Pb²⁺, and 75.9 for CR, and the adsorption phenomena followed on the Freundlich and Langmuir isotherm models and the second-order kinetic model (R² > 0.99). KAC-CS-AgNPs also exhibited excellent reusability of up to four consecutive cycles with minor losses in adsorption ability. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The bacterial inactivation tests demonstrated that KAC-CS-AgNPs had a strong bactericidal effect on both E. coli and S. aureus, with MIC calculated for E. coli and S. aureus as 32 µg mL^-1 and 44 µg mL^-1, respectively. The synthesized bioinspired nanocomposite KAC-CS-AgNPs could be an innovative solution for effective and sustainable wastewater treatment and has great potential for commercial applications.

Partitioning of heavy metals in sediments and microplastics from stormwater runoff

Microplastics could act as vehicles for transporting heavy metals from urban environments to water resources via stormwater runoff. Although the transport of heavy metals by sediments has been widely studied, there is a lack of mechanistic understanding of their competition with microplastics (MPs) for heavy metal uptake. Therefore, this study was conducted to examine the partitioning of heavy metals in microplastics and sediments from stormwater runoff. For this purpose, new low density polyethylene (LDPE) pellets were selected as representative MPs, and accelerated UV-B irradiation experiments were conducted for eight weeks to generate photodegraded MPs. The competition of Cu, Zn, and Pb species for the occupation of available surface sites on sediments and new and photodegraded LDPE MPs was examined through 48 h kinetics experiments. Additionally, leaching experiments were conducted to identify the extent of organics released into the contact water by new and photodegraded MPs. Moreover, 24 h metal exposure experiments were conducted to identify the role of initial metal concentrations on their accumulation onto the MPs and sediments. The photodegradation process altered the LDPE MPs' surface chemistry by creating the oxidized carbon functional groups [>CO, >C-O-C<], and it also enhanced their dissolved organic carbon (DOC) leaching into the contact water. The results showed significantly greater levels of Cu, Zn, and Pb accumulations on photodegraded MPs compared to the new MPs in either absence or presence of sediments. Heavy metal uptake by sediments when photodegraded MPs were present was significantly reduced. This might be due to the organic matter leached by photodegraded MPs into the contact water.

Physico-chemical, structural, and adsorption properties of amino-modified starch derivatives for the removal of (in)organic pollutants from aqueous solutions

In this study, an environmentally sustainable process of crystal violet, congo red, methylene blue, brilliant green, Pb²⁺, Cd²⁺, and Zn²⁺ ions adsorption from aqueous solutions onto amino-modified starch derivatives was investigated. The degree of substitution, elemental analysis, swelling capacity, solubility, and FTIR, XRD, and SEM techniques were used to characterize the adsorbents. The influence of pH, contact time, temperature, and initial concentration has been studied to optimize the adsorption conditions. The amino-modified starch was the most effective in removing crystal violet (CV) (65.31-80.46 %) and Pb²⁺ (67.44-80.33 %) within the optimal adsorption conditions (pH 5, 10 mg dm^-3, 25 °C, 180 min). The adsorption of CV could be described by both Langmuir and Freundlich adsorption isotherms, while the adsorption of Pb²⁺ ions was better described by the Langmuir isotherm. The pseudo-second order model can be used to describe the adsorption kinetics of CV and Pb²⁺ on all tested samples. The thermodynamic study indicated that the adsorption of CV was exothermic, while the Pb²⁺ adsorption was endothermic. The simultaneous removal of CV and Pb²⁺ from the binary mixture has shown their competitive behavior. Thus, the amino-modified starch is a promising eco-friendly adsorbent for the removal of dyes and heavy metals from polluted water.

Synthesis and Analysis of Impregnation on Activated Carbon in Multiwalled Carbon Nanotube for Cu Adsorption from Wastewater

Industrial wastes contain more toxins that get dissolved in the rivers and lakes, which are means of freshwater reservoirs. The contamination of freshwater leads to various issues for microorganisms and humans. This paper proposes a novel method to remove excess copper from the water. The nanotubes are used as a powder in membrane form to remove the copper from the water. The multiwalled carbon nanotube is widely used as a membrane for filtration. It contains many graphene layers of nm size that easily adsorbs the copper when the water permeates through it. Activated carbon is the earliest and most economical method that also adsorbs copper to a certain extent. This paper proposes the methods of involving the activated carbon in the multiwalled carbon nanotube to improve the adsorption capability of the copper. Here, activated carbon is impregnated on the multiwalled carbon nanotube's defect and imperfect surface areas. It makes more adsorption sites on the surface, increasing the adsorption amount. The same method is applied to Hydroxyl functionalized multiwalled carbon nanotubes. Both the methods showed better results and increased the copper removal. The functionalized method removed 93.82% copper, whereas the nonfunctionalized method removed 80.62% copper from the water.

Full factorial design and dynamic modelling of silent and ultrasound-assisted lead and cadmium removal by porous biosorbent

Present work aimed to analyse single and competitive lead and cadmium batch adsorption, using experimental studies and mathematical modelling. The experiments were conducted in silent and ultrasound-assisted systems, in aqueous environment, using grinded hazelnut shells as porous biosorbent. The influence of process factors (pH, adsorbent concentration, adsorbent particle size, and initial species concentration in liquid phase) on species removal efficiency was evaluated when process equilibrium was attained. The statistical study, following a 2⁴ factorial experimental design, allowed the development of a model to predict variables influence. Based on the obtained results a deeper analysis of the separation efficiency, depending on process factors, was conducted. The dynamic study was performed based on experimentally obtained removal rates, modelled considering species diffusion, with reversible kinetics of sorption inside solid particles. Hence, the dynamics of removal efficiency was determined for several representative experiments. The equilibrium isotherms data, best fitted by an appropriate Langmuir model, were used in the dynamic model to reduce the number of model parameters which normally require experimental identification.

In Situ Synthesis of Carbon Nanotube–Steel Slag Composite for Pb(II) and Cu(II) Removal from Aqueous Solution

Methods and materials that effectively remove heavy metals, such as lead and copper, from wastewater are urgently needed. In this study, steel slag, a low-cost byproduct of steel manufacturing, was utilized as a substrate material for carbon nanotube (CNT) growth by chemical vapor deposition (CVD) to produce a new kind of efficient and low-cost absorbent without any pretreatment. The synthesis parameters of the developed CNT–steel slag composite (SS@CNTs) were optimized, and its adsorption capacities for Pb(II) and Cu(II) were evaluated. The results showed that the optimal growth time, synthesis temperature and acetylene flow rate were 45 min, 600 °C and 200 sccm (standard cubic centimeter per minute), respectively. The SS@CNTs composite had a high adsorption capacity with a maximum removal amount of 427.26 mg·g−1 for Pb(II) and 132.79 mg·g−1 for Cu(II). The adsorption proceeded rapidly during the first 15 min of adsorption and reached equilibrium at approximately 90 min. The adsorption processes were in accordance with the isotherms of the Langmuir model and the pseudo-second-order model, while the adsorption thermodynamics results indicated that the removal for both metals was an endothermic and spontaneous process. This study showed that compared with other adsorbent materials, the SS@CNTs composite is an efficient and low-cost adsorbent for heavy metals such as lead and copper.

Herbal Infusions as a Valuable Functional Food

Herbal infusions are an underestimated and easy to intake a source of biologically active natural compounds (polyphenols), which, in the dissolved form, are more easily absorbed. Therefore, this study aimed to assess the potential of herbal infusions as a functional food to reduce postprandial hyperglycemia (inhibition of α-amylase and α-glucosidase) and to reduce the effects of increased blood glucose level (antioxidant effect-DPPH, CUPRAC, and Fe²⁺ chelating assays, as well as anti-inflammatory activity-inhibition of collagenase). We showed that polyphenols are present in the examined aqueous herbal infusions (including chlorogenic and gallic acids). Subsequently, our research has shown that herbal infusions containing cinnamon bark, mulberry leaves, and blackberry fruits most strongly inhibit glucose release from complex carbohydrates, and that all herbal infusions can, to different degrees, reduce the effects of elevated blood sugar. In conclusion, infusions prepared from herbal blends could be recommended to prevent type II diabetes.

Adsorption and Release Characteristics of Purified and Non-Purified Clinoptilolite Tuffs towards Health-Relevant Heavy Metals

The occurrence of health-relevant contaminants in water has become a severe global problem. For treating heavy-metal-polluted water, the use of zeolite materials has been extended over the last decades, due to their excellent features of high ion exchange capacity and absorbency. The aim of this study was to assess the effect of heavy metal uptake of one purified (PCT) and two non-purified clinoptilolite tuffs (NPCT1 and NPCT2) in aqueous solutions on monovalent ions Ni+, Cd+, Cs+, Ba+, Tl+, and Pb+. Experiments were furthermore carried out in artificial gastric and intestinal fluids to mimic human digestion and compare removal efficiencies of the adsorbent materials as well as release characteristics in synthetic gastric (SGF) and intestinal fluids (SIF). Batch experiments show low sorption capacities for Ni+ and Cd+ for all studied materials; highest affinities were found for Ba+ (99–100%), Pb+ (98–100%), Cs+ (97–98%), and Tl+ (96%), depending on the experimental setup for the PCT. For the adsorption experiments with SGF, highest adsorption was observed for the PCT for Pb+, with an uptake of 99% of the lead content. During artificial digestion, it was proven that the PCT did not release Ba+ cations into solution, whereas 13,574 ng·g−1 and 4839 ng·g−1 of Ba+ were measured in the solutions with NPCT1 and NPCT2, respectively. It was demonstrated that the purified clinoptilolite tuff is most effective in remediating heavy-metal-polluted water, particularly during artificial digestion (99% of Pb+, 95% of Tl+, 93% of Ba+). In addition, it was shown that the released amount of bound heavy metal ions (e.g., barium) from the non-purified clinoptilolite tuffs into the intestinal fluids was significantly higher compared to the purified product.

Scalable synthesis of monodisperse and recyclable sulphonated polystyrene microspheres for sustainable elimination of heavy metals in wastewater

Herein, we demonstrate a scalable method for fabricating monodisperse sulphonated polystyrene (SPS) microspheres with abundant sulphonic acid groups and excellent heavy metal removal ability. A comprehensive characterization through SEM, EDS, FT-IR, TG, XRD and XPS confirmed the formation of the SPS microspheres. Take advantage of the abundant sulphonic acid groups on the surface of microspheres, as well as the superior monodisperse properties, adsorption ability of SPS microspheres both in quantity and speed have been enhanced. The adsorption equilibrium obeyed the Langmuir isotherm model with the theoretical maximum capacities of 49.16, 15.38 and 13.89 mg·g-1 for Pb2+, Zn2+ and Cu2+, respectively (30°C, pH = 3.5). Besides, the adsorption equilibriums of Pb2+ onto SPS microspheres can be achieved within only 1 min and the adsorption kinetics can be fitted by a pseudo-second-order kinetics model. More importantly, because of the micron structure of the SPS microspheres, it could overcome the excessive hydrophilia brought by rich sulphonic acid groups and thereby easily separated, which maintain a good recyclable capacity after five regeneration cycles. With the excellent adsorption ability and reusability, SPS microspheres can efficiently handle the polluted water in a convenience and rapid process, which satisfies the sustainable pollution treatment in heavy metals elimination.

Effects of carbon nanotubes on the toxicities of copper, cadmium and zinc toward the freshwater microalgae Scenedesmus obliquus

Due to their unique structure and properties, carbon nanotubes (CNTs) released into the aquatic environment can potentially influence the behavior of other coexisting pollutants, thereby altering their toxicity to aquatic organisms. In this study, the toxicities of multi-walled CNTs and three heavy metals, copper (Cu), cadmium (Cd) and zinc (Zn) were determined individually. Following this, CNTs with low concentrations (1 and 5 mg/L) were co-exposed with Cu, Cd or Zn to the microalgae Scenedesmus obliquus, to investigate the effects and underlying mechanisms of CNTs on metal toxicity. Results showed that CNTs, especially at a concentration of 5 mg/L, promoted algae growth and enhanced photosynthetic efficiency via increasing exciton trap efficiency and quantum yield for electron transport. Introduction of CNTs appeared to alleviate the adverse effects of Cu, Cd or Zn on microalgae, indicated by algae growth, total chlorophyll content and photosynthetic indices. However, these effects differed greatly for different metals, depending on both the toxicity of each metal and the exposure period (4 day and 8 day). Enhancement of photosynthesis and interference of metal uptake by CNTs, have a crucial role in the effects of CNTs on metal toxicity.

Enhanced Heavy Metal Removal from Acid Mine Drainage Wastewater Using Double-Oxidized Multiwalled Carbon Nanotubes

Due to the unique properties of carbon nanotubes (CNTs), they have attracted great research attention as an emergent technology in many applications including water and wastewater treatment. However, raw CNTs have few functional groups, which limits their use in heavy metal removal. Nevertheless, their removal properties can be improved by oxidation processes that modify its surface. In this study, we assessed the capacity of oxidized and double-oxidized multiwalled carbon nanotubes (MWCNTs) to remove heavy metals ions from acidic solutions. The MWCNTs were tested for copper (Cu), manganese (Mn), and zinc (Zn) removal, which showed an increment of 79%, 78%, and 48%, respectively, with double-oxidized MWCNTs compared to oxidized MWCNTs. Moreover, the increase in pH improved the sorption capacity for all the tested metals, which indicates that the sorption potential is strongly dependent on the pH. The kinetic adsorption process for three metals can be described well with a pseudo-second-order kinetic model. Additionally, in multimetallic waters, the sorption capacity decreases due to the competition between metals, and it was more evident in the removal of Zn, while Cu was less affected. Besides, XPS analysis showed an increase in oxygen-containing groups on the MWCNTs surface after oxidation. Finally, these analyses showed that the chemical interactions between heavy metals and oxygen-containing groups are the main removal mechanism. Overall, these results contribute to a better understanding of the potential use of CNTs for water treatment.

Biosorptive application of defatted Laurus nobilis leaves as a waste material for treatment of water contaminated with heavy metal

Defatted Laurus nobilis leaves as a natural biosorbent was first evaluated for elimination of toxic heavy metals such as Pb(II), Cd(II), Zn(II), Cu(II) from aqueous solutions for its wide availability as forest industry waste, in this study. The effects of solution pH, contact time, biosorbent dosage, initial metal ions concentration, ionic strength, humic acid effect, and their competitive effect on the biosorption of lead(II), cadmium(II), Copper(II), and zinc(II) by defatted Laurus nobilis leaves waste (LW) were studied for each metal. The biosorbent was characterized using FT-IR and SEM images. Comparative isotherm and kinetic studies were performed. The sorption of Cd(II) and Zn(II) on LW fitted better in the Freundlich model but Pb(II) and Cu(II) sorption fitted better in the Langmuir model. From the obtained results, the pseudo-second-order kinetic model described the biosorption of cadmium, lead, zinc copper ions the best. The biosorbent showed the maximum biosorption capacities (q_m) of 96.2, 8.6, 8.7, and 6.0 mg g^-1 for lead, cadmium, zinc, and copper, respectively. These results indicated that LW may be used as an effective and inexpensive heavy metal remediation material. Comparison to previous studies showed that LW is also comparable to (or better than) several other biosorbents.

Effective remediation of low-concentration cadmium in groundwater using nano-scale magnesia

Cadmium (Cd), one of the hazardous elements in groundwater, is a severe threat to human health and ecological systems even at low concentrations. This study explores the effectiveness of commercial and self-synthesized nano-scale magnesia (NMgO) for remediating low-concentration Cd in groundwater as well as their associated removal mechanisms. The sorption kinetic data for both NMgOs were well fitted to the pseudo-second-order model and the calculated q _e values matched the experimental q _e values for both commercial and self-synthesized NMgOs. The sorption equilibrium data for both NMgOs were well fitted to the Langmuir isotherm model, with the maximum Cd sorption capacity (q _e) of 19.25 and 16.54 mg/g at an initial concentration range of 5-200 μg/L and a temperature of 25 °C, for commercial and self-synthesized NMgOs, respectively. The combined sorption kinetics and equilibrium data suggest that the sorption onto both NMgOs follows a monolayer chemisorption. The scanning electron microscope-energy dispersive X-ray (SEM-EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffractometer (XRD) analyses show that the chemisorption of Cd onto commercial NMgO is due to the formation of Cd(OH)₂, which precipitates on the sorbent surface. For the self-synthesized NMgO, it was demonstrated that the hydroxyl group plays a role in the chemisorption process and the amount of Cd sorbed on the sorbent was quantified. The results of batch experiments showed that both NMgOs removed Cd effectively, obtaining a removal efficiency of more than 99%, under different experimental conditions of pH, sorbent dosage, co-existing ions, and simulated groundwater. Results from both the sorption isotherm and desorption experiments indicated strong bonding between Cd and both NMgOs, suggesting that NMgOs are safe, effective, and practical sorbents to remediate Cd in groundwater.

The impact of graphene nano-plates on the behavior of novel conducting polyazomethine nanocomposites

Highly conducting polyazomethine/graphene nano-plate nanocomposites were easily fabricated, and their electrical conductivity values reach those of semiconductors.

Electrochemical Study of Carbon Nanotubes/Nanohybrids for Determination of Metal Species Cu2+ and Pb2+ in Water Samples

The use of nanomaterials, such as nanoparticles and nanotubes, for electrochemical detection of metal species has been investigated as a way of modifying electrodes by electrochemical stripping analysis. The present study develops a new methodology based on a comparative study of nanoparticles and nanotubes with differential pulse anodic stripping voltammetry (DPASV) and examines the simultaneous determination of copper and lead. The glassy carbon electrode modified by gold nanoparticles demonstrated increased sensitivity and decreased detection limits, among other improvements in analytical performance data. Under optimized conditions (deposition potential -0.8 V versus Ag/AgCl; deposition time, 300 s; resting time, 10 s; pulse amplitude, 50 mV; and voltage step height, 4 mV), the detection limits were 0.2279 and 0.3321 ppb, respectively, for determination of Pb²⁺ and Cu²⁺. The effects of cations and anions on the simultaneous determination of metal ions do not exhibit significant interference, thereby demonstrating the selectivity of the electrode for simultaneous determination of Pb²⁺ and Cu²⁺. The same method was also used to determine Cu²⁺ in water samples.

Immobilization of Pb and Cu in polluted soil by superphosphate, multi-walled carbon nanotube, rice straw and its derived biochar

Lead (Pb) and copper (Cu) contamination in croplands pose severe health hazards and environmental concerns throughout soil-food chain transfer. In the present study, BCR, TCLP, CaCl2, and SBET techniques were employed to evaluate the simultaneous effectiveness of rice straw (RS) and its derived biochar (BC), multiwall carbon nanotube (MWCNT), and single superphosphate (SSP) to immobilize the Pb and Cu in co-contaminated soil. The BCR sequential extraction results suggested that with increasing BC and SSP amount, the acid-soluble fractions decreased while oxidizable and residual proportions of Pb and Cu were increased significantly. Compared to SSP, the application of BC amendment substantially modified partitioning of Cu from easily exchangeable phase to less bioavailable residual bound fraction. The immobilized Pb and Cu were mainly transformed to reducible forms. The TCLP and CaCl2-extracted Pb and Cu were reduced significantly by the addition of BC compared to RS and MWCNT, whereas the bio-accessibility of Pb significantly reduced with RS addition. SSP showed better results for Pb immobilization while marginal for Cu in co-contaminated soil. Overall, the addition of BC offered the best results and could be effective in both Pb and Cu immobilization thereby reducing their mobility and bioavailability in the co-contaminated soil.

Interactions of carbon nanotubes with aqueous/aquatic media containing organic/inorganic contaminants and selected organisms of aquatic ecosystems--A review

Due to their unique molecular architecture translating into numerous every-day applications, carbon nanotubes (CNTs) will be ultimately an increasingly significant environmental contaminant. This work reviews qualitative/quantitative analyses of interactions of various types of CNTs and their chemically modified analogues with aqueous/aquatic media containing organic and inorganic contaminants and selected organisms of aquatic ecosystems. A special emphasis was placed on physicochemical interactions between CNTs as adsorbents of heavy metal cations and aromatic compounds (dyes) with its environmental consequences. The studies revealed CNTs as more powerful adsorbents of aromatic compounds (an order of magnitude higher adsorption capacity) than metal cations. Depending on the presence of natural organic matter (NOM) and/or co-contaminants, CNTs may act as Trojan horse while passing through biological membranes (in the absence of NOM coordinating metal ions). Nanotubes, depending on flow conditions and their morphology/surface chemistry, may travel with natural waters or sediment with immobilized PAHs or metals and/or increase cyto- and ecotoxicity of PAHs/metal ions by their release via competitive complexation, or cause synergic ecotoxicity while adsorbing nutrients. Additionally, toxicity of CNTs against exemplary aquatic microorganisms was reviewed. It was found for Daphnia magna that longer exposures to CNTs led to higher ecotoxicity with a prolonged CNTs excretion. SWCNTs were more toxic than MWCNTs, while hydrophilization of CNTs via oxidation or anchoring thereto polar/positively charged polymer chains enhanced stability of nanotubes dispersion in aqueous media. On the other hand, bioavailability of functionalized CNTs was improved leading to more complex both mechanisms of uptake and cytotoxic effects.

Lead and copper removal from aqueous solutions using carbon foam derived from phenol resin

Phenolic resin-based carbon foam was prepared as an adsorbent for removing heavy metals from aqueous solutions. The surface of the produced carbon foam had a well-developed open cell structure and the specific surface area according to the BET model was 458.59m(2)g(-1). Batch experiments showed that removal ratio increased in the order of copper (19.83%), zinc (34.35%), cadmium (59.82%), and lead (73.99%) in mixed solutions with the same initial concentration (50mgL(-1)). The results indicated that the Sips isotherm model was the most suitable for describing the experimental data of lead and copper. The maximum adsorption capacity of lead and copper determined to Sips model were 491mgg(-1) and 247mgg(-1). The obtained pore diffusion coefficients for lead and copper were found to be 1.02×10(-6) and 2.42×10(-7)m(2)s(-1), respectively. Post-sorption characteristics indicated that surface precipitation was the primary mechanism of lead and copper removal by the carbon foam, while the functional groups on the surface of the foam did not affect metal adsorption.

Competitive adsorption of metals onto magnetic graphene oxide: comparison with other carbonaceous adsorbents

Competitive adsorption isotherms of Cu(II), Pb(II), and Cd(II) were examined on a magnetic graphene oxide (GO), multiwalled carbon nanotubes (MWCNTs), and powered activated carbon (PAC). A series of analyses confirmed the successful synthesis of the magnetic GO based on a simple ultrasonification method. Irrespective of the adsorbents, the adsorption was highly dependent on pH, and the adsorption was well described by the Langmuir isotherm model. The maximum adsorption capacities of the adsorbents were generally higher in the order of Pb(II) > Cu(II) > Cd(II), which is the same as the degree of the electronegativity and the hydrated radius of the metals, suggesting that the metal adsorption may be governed by an ion exchange between positively charged metals and negatively charged surfaces, as well as diffusion of metals into the surface layer. The adsorption of each metal was mostly lower for multi- versus single-metal systems. The antagonistic effects were influenced by solution pH as well as the type of metals, and they were higher in the order of the magnetic GO > MWCNT > PAC. Dissolved HS played a greater role than HS adsorbed onto the adsorbents, competing with the adsorption sites for metal complexation.

Removal of cadmium ion from wastewater by carbon-based nanosorbents: a review

A green environment and a healthy life are dream projects of today's science and technology to save the world. Heavy metal ions in water affect both environment and human health. Cadmium has been identified as one of the heavy metals that causes acute or chronic toxic effects if ingested. Increasing use of cadmium in different technological fields has raised concern about its presence and removal from water/wastewater. Researchers have made many systematic efforts to remove heavy metals from water to reduce their impact on human beings and the environment. Adsorption is one of the best methods to remove heavy metals from water among the different proposed methods. This study explores carbon-based nanosorbents which have been proved as effective adsorbents for removal of cadmium ions from water. The adsorption efficiency of carbon-based nanosorbents is the main criterion to rank and select them for removal of cadmium ions from water. Toxicity, reusability and environmentally friendly characteristics of sorbents are also taken considered while ranking the suitable carbon-based nanosorbents for removal of cadmium ions from water.

Synthesis of poly(m-phenylenediamine)/iron oxide/acid oxidized multi-wall carbon nanotubes for removal of hexavalent chromium

Poly(m-phenylenediamine)-coated Fe₃O₄/o-MWCNTs nanoparticles (PmPD/Fe₃O₄/o-MWCNTs) were synthesized by one-step chemical oxidation polymerization.