Pharmaceutical salts/cocrystals of enoxacin with dicarboxylic acids: Enhancing in vitro antibacterial activity of enoxacin by improving the solubility and permeability

Approaches for Inclusion Complexes of Ezetimibe with Cyclodextrins: Strategies for Solubility Enhancement and Interaction Analysis via Molecular Docking

This study aimed to improve the solubility of ezetimibe (EZT), which has low aqueous solubility, by preparing complexes using β-cyclodextrin (β-CD) derivatives. Phase solubility studies and Job's plot confirmed a high apparent stability constant for EZT with β-CD and even higher constants with its derivatives, establishing a 1:1 stoichiometric ratio. The composites were prepared using spray drying over a range of molar ratios, and their physicochemical properties were evaluated using techniques such as scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FT-IR). Saturation solubility and in vitro dissolution tests revealed that solubility increased with higher CD molar ratios. EZT/RM-β-CD inclusion complexes (ICs) and EZT/DM-β-CD ICs exhibited a similar solubility, which was greater than that of EZT/HP-β-CD ICs and EZT/SBE-β-CD ICs (where RM, DM, HP, and SEB represent H, CH3, -CH2-CHOH-CH3 and -(CH2)4-SO3Na synthetic derivatives, respectively). Most complexes, except for EZT/SBE-β-CD at 1:2 or higher ratios, showed superior solubility compared with EZT powder and commercial products. Molecular docking simulations confirmed EZT inclusion within the CD, revealing hydrogen bonds and binding energies that aligned with solubility trends. These findings suggest that EZT complexes with β-CD derivatives significantly improve solubility, highlighting their potential for developing more effective oral solid formulations for hyperlipidemia treatment.

Enhancing the solubility and antibacterial activity of novel molecular salts of enrofloxacin drug with isomeric pyridinedicarboxylic acids

Enrofloxacin (EFX) is a third-generation synthetic fluoroquinolone with a broad spectrum of antibacterial activity but suffers from low water solubility, affecting its bioavailability. This study attempts to enhance the physicochemical and biological properties of enrofloxacin by converting it into multicomponent forms using crystal engineering concepts. Cocrystallization of enrofloxacin with isomeric pyridine-2,n-dicarboxylic acids (n = 3,4,5,6) resulted in four new crystalline salts (1:1): EFX·Py2,3DCA, EFX·Py2,4DCA, EFX·Py2,5DCA·H2O and EFX·Py2,6DCA·H2O; two of these are monohydrates. The protonation of the nitrogen atom of the piperazine moiety and the presence of crystallization water molecules were confirmed by single-crystal X-ray diffraction and Fourier transform infrared spectroscopy. Thermogravimetric analysis provided information on the thermal behaviour of multicomponent forms. The biological studies showed that the obtained salts are characterized by high antibacterial activity against Gram-positive and Gram-negative bacteria, and their haemolytic activity is low. The new salts demonstrate significantly greater solubility in water compared to the parent drug, along with enhanced antibacterial activity; hence, pyridinedicarboxylic acids appear to be efficient cocrystallizing agents for improving the efficacy of pharmaceutical ingredients.

A Perspective on the Permeability of Cocrystals/Organic Salts of Oral Drugs

According to the BCS classification system, the differentiation of drugs is based on two essential parameters of solubility and permeability, meaning the latter is as pivotal as the former in creating marketable pharmaceutical products. Nevertheless, the indispensable role of permeability in pharmaceutical cocrystal profiles has not been sufficiently cherished, which can be most probably attributed to two principal reasons. First, responsibility may be on more user-friendly in vitro measurement procedures for solubility compared to permeability, implying the permeability measurement process seems unexpectedly difficult for researchers, whereas they have a complete understanding of solubility concepts and experiments. Besides, it may be ascribed to the undeniable attraction of introducing new crystal-based structures which mostly leaves the importance of improving the function of existing multicomponents behind. Bringing in new crystalline entities, to rephrase it, researchers have a fairly better chance of achieving high-class publications. Although the Food and Drug Administration (FDA) has provided a golden opportunity for pharmaceutical cocrystals to straightforwardly enter the market by simply considering them as derivatives of the existing active pharmaceutical ingredients, inattention to assessing and scaling up permeability which is intimately linked with solubility has resulted in limited numbers of them in the global pharmaceutical market. Casting a glance at the future, it is apprehended that further development in the field of permeability of pharmaceutical cocrystals and organic salts requires a meticulous perception of achievements to date and potentials to come. Thence, this perspective scrutinizes the pathway of permeation assessment making researchers confront their fear upfront through mapping the simplest way of permeability measurement for multicomponents of oral drugs.

Improved photostability, solubility, hygroscopic stability and antimicrobial activity of fleroxacin by synthesis of fleroxacin-D-tartaric acid pharmaceutical salt

To improve the solubility of the fluoroquinolone drug fleroxacin (FL), based on the previous experience of our research group in synthesizing co-crystals/salts of quinolone drugs to improve the physicochemical properties of drugs, Fleroxacin-D-tartaric acid dihydrate salt (FL-D-TT, C17H19F3N3O3·C4H5O6·2(H2O)), was synthesized for the first time using fleroxacin and D/L-tartaric acid (D/L-TT). Structural characterization of FL-D-TT was carried out using single-crystal X-ray diffraction, infrared spectral analysis (FT-IR) and powder X-ray diffraction (PXRD). Molecular electrostatic potential analysis showed that D-tartaric acid interacted more readily with FL than L-tartaric acid. The solubility of FL-D-TT (9.71 mg/mL, 1.82 mg/mL) was significantly higher compared to FL (0.39 mg/mL, 0.71 mg/mL) in water and buffer solution at pH 7.4. This may be attributed to the formation of charge-assisted hydrogen bonds (CAHBs) between FL and D-TT that facilitates the dissociation of FL cations in the dissolution medium, leading to an increase in FL solubility. This also led to some improvement in the in vitro antimicrobial activity of FL-D-TT against E. coli, S. typhi, and S. aureus. In addition, the hygroscopic stability of FL has been improved. Surprisingly, FL-D-TT had better photostability than FL, which could be attributed to the introduction of D-TT to make the photosensitizing moiety of FL more stable, which led to the improvement of the photostability of FL.

Ionic liquids as the effective technology for enhancing transdermal drug delivery: Design principles, roles, mechanisms, and future challenges

Ionic liquids (ILs) have been proven to be an effective technology for enhancing drug transdermal absorption. However, due to the unique structural components of ILs, the design of efficient ILs and elucidation of action mechanisms remain to be explored. In this review, basic design principles of ideal ILs for transdermal drug delivery system (TDDS) are discussed considering melting point, skin permeability, and toxicity, which depend on the molar ratios, types, functional groups of ions and inter-ionic interactions. Secondly, the contributions of ILs to the development of TDDS through different roles are described: as novel skin penetration enhancers for enhancing transdermal absorption of drugs; as novel solvents for improving the solubility of drugs in carriers; as novel active pharmaceutical ingredients (API-ILs) for regulating skin permeability, solubility, release, and pharmacokinetic behaviors of drugs; and as novel polymers for the development of smart medical materials. Moreover, diverse action mechanisms, mainly including the interactions among ILs, drugs, polymers, and skin components, are summarized. Finally, future challenges related to ILs are discussed, including underlying quantitative structure-activity relationships, complex interaction forces between anions, drugs, polymers and skin microenvironment, long-term stability, and in vivo safety issues. In summary, this article will promote the development of TDDS based on ILs.

Insights into structural, spectroscopic, and hydrogen bonding interaction patterns of nicotinamide-oxalic acid (form I) salt by using experimental and theoretical approaches

In the present work, nicotinamide-oxalic acid (NIC-OXA, form I) salt was crystallized by slow evaporation of an aqueous solution. To understand the molecular structure and spectroscopic properties of NIC after co-crystallization with OXA, experimental infrared (IR), Raman spectroscopic signatures, X-ray powder diffraction (XRPD), and differential scanning calorimetry (DSC) techniques were used to characterize and validate the salt. The density functional theory (DFT) methodology was adopted to perform all theoretical calculations by using the B3LYP/6-311++G (d, p) functional/basis set. The experimental geometrical parameters were matched in good correlation with the theoretical parameters of the dimer than the monomer, due to the fact of covering the nearest hydrogen bonding interactions present in the crystal structure of the salt. The IR and Raman spectra of the dimer showed the red (downward) shifting and broadening of bands among (N15-H16), (N38-H39), and (C13=O14) bonds of NIC and (C26=O24), (C3=O1), and (C26=O25) groups of OXA, hence involved in the formation of NIC-OXA salt. The atoms in molecules (AIM) analysis revealed that (N8-H9···O24) is the strongest (conventional) intermolecular hydrogen bonding interaction in the dimer model of salt with the maximum value of interaction energy -12.1 kcal mol-1. Furthermore, the natural bond orbital (NBO) analysis of the Fock matrix showed that in the dimer model, the (N8-H9···O24) bond is responsible for the stabilization of the salt with an energy value of 13.44 kcal mol-1. The frontier molecular orbitals (FMOs) analysis showed that NIC-OXA (form I) salt is more reactive and less stable than NIC, as the energy gap of NIC-OXA (form I) salt is less than that of NIC. The global and local reactivity descriptor parameters were calculated for the monomer and dimer models of the salt. The electrophilic, nucleophilic, and neutral reactive sites of NIC, OXA, monomer, and dimer models of salt were visualized by plotting the molecular electrostatic potential (MESP) surface. The study provides valuable insights into combining both experimental and theoretical results that could define the physicochemical properties of molecules.

Cocrystals by Design: A Rational Coformer Selection Approach for Tackling the API Problems

Active pharmaceutical ingredients (API) with unfavorable physicochemical properties and stability present a significant challenge during their processing into final dosage forms. Cocrystallization of such APIs with suitable coformers is an efficient approach to mitigate the solubility and stability concerns. A considerable number of cocrystal-based products are currently being marketed and show an upward trend. However, to improve the API properties by cocrystallization, coformer selection plays a paramount role. Selection of suitable coformers not only improves the drug's physicochemical properties but also improves the therapeutic effectiveness and reduces side effects. Numerous coformers have been used till date to prepare pharmaceutically acceptable cocrystals. The carboxylic acid-based coformers, such as fumaric acid, oxalic acid, succinic acid, and citric acid, are the most commonly used coformers in the currently marketed cocrystal-based products. Carboxylic acid-based coformers are capable of forming the hydrogen bond and contain smaller carbon chain with the APIs. This review summarizes the role of coformers in improving the physicochemical and pharmaceutical properties of APIs, and deeply explains the utility of afore-mentioned coformers in API cocrystal formation. The review concludes with a brief discussion on the patentability and regulatory issues related to pharmaceutical cocrystals.

Optimized Green Nanoemulsions to Remove Pharmaceutical Enoxacin from Contaminated Bulk Aqueous Solution

We attempted to develop green nanoemulsions (ENE1-ENE5) using capryol-C90 (C90), lecithin, Tween 80, and N-methyl-2-pyrrolidone (NMP). HSPiP software and experimentally obtained data were used to explore excipients. ENE1-ENE5 nanoemulsions were prepared and evaluated for in vitro characterization parameters. An HSPiP based QSAR (quantitative structure-activity relationship) module established a predictive correlation between the Hansen solubility parameter (HSP) and thermodynamic parameters. A thermodynamic stability study was conducted under stress conditions of temperature (from -21 to 45 °C) and centrifugation. ENE1-ENE5 were investigated for the influence of size, viscosity, composition, and exposure time on emulsification (5-15 min) on %RE (percent removal efficiency). Eventually, the treated water was evaluated for the absence of the drug using electron microscopy and optical emission spectroscopy. HSPiP program predicted excipients and established the relationship between enoxacin (ENO) and excipients in the QSAR module. The stable green nanoemulsions ENE-ENE5 possessed the globular size range of 61-189 nm, polydispersity index (PDI) of 0.1-0.53, viscosity of 87-237 cP, and ζ potential from -22.1 to -30.8 mV. The values of %RE depended upon the composition, globular size, viscosity, and exposure time. ENE5 showed %RE value as 99.5 ± 9.2% at 15 min of exposure time, which may be due to the available maximized adsorption surface. SEM-EDX (scanning electron microscopy-X-ray dispersive energy mode) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) negated the presence of ENO in the treated water. These variables were critical factors for efficient removal of ENO during water treatment process design. Thus, the optimized nanoemulsion can be a promising approach to treat water contaminated with ENO (a potential pharmaceutical antibiotics).

Milk Exosomes Facilitate Oral Delivery of Drugs against Intestinal Bacterial Infections

Biopharmaceutics Classification System (BCS) class II and IV drugs exhibit low solubility and suffer a limitation in oral administration. Exosomes have attracted intensive attention in the efficient delivery of such compounds. However, low gastrointestinal stability and high production cost of exosomes hinder their development as drug carriers. Here, milk exosomes are functionalized with phosphatidylserine and are capable of improving the solubility of BCS class II and IV drugs, resulting in facilitating the oral delivery of the drugs. A natural flavonoid, α-mangostin, is loaded into exosomes (AExo) to enhance the antibacterial efficiency, demonstrated by clearing 99% of bacteria in macrophages. Furthermore, AExo exhibits high mucus penetrability and shows a significant therapeutic efficacy in two animal infection models. Collectively, this work expands the application of exosomes from bovine milk with simple operation and low cost, shedding light on the potential of milk exosomes in improving the solubility of drugs to enhance the efficacy of oral administration.

Preparation, characterization, and pharmacokinetics of rivaroxaban cocrystals with enhanced in vitro and in vivo properties in beagle dogs

Rivaroxaban (RIV) is a direct Factor Xa inhibitor anticoagulant, but the oral bioavailability of RIV is estimated to be only 60% due to its poor solubility. The aim of the present study was to improve the solubility and bioavailability of RIV. Five cocrystals—p-hydroxybenzoic acid (HBA), 2,4-dihydroxybenzoic acid (DBA), nicotinamide (NA), isonicotinamide (IA), and succinic acid (SA)—were used as cofomers and were successfully obtained and characterized by powder X-ray diffraction, thermal analysis, and Fourier transform infrared spectra. RIV-DBA and RIV-HBA cocrystals showed obvious improvements in solubility, dissolution (under sink conditions), and intrinsic dissolution rates versus RIV. Moreover, the dissolution of RIV-HBA, RIV-DBA, and RIV-SA cocrystals under non-sink conditions showed obvious “spring and parachute” patterns. The in vitro permeability levels in a Caco-2 cell model of RIV-DBA and RIV-IA cocrystals were significantly improved versus RIV. Pharmacokinetic studies in beagle dogs showed that RIV-DBA and RIV-HBA cocrystals had higher bioavailability than RIV. The enhancements in solubility and bioavailability indicate the potential of RIV cocrystals as a better candidate for the treatment of thrombosis versus RIV.

Quantification of Caffeine Interactions in Choline Chloride Natural Deep Eutectic Solvents: Solubility Measurements and COSMO-RS-DARE Interpretation

Solubility of active pharmaceutical ingredients is an important aspect of drug processing and formulation. Although caffeine was a subject of many studies aiming to quantify saturated solutions, many applied solvents suffer from not being environmentally friendly. This work fills this gap by presenting the results of solubility measurements in choline chloride natural deep eutectic solvents, ccNADES, comprising one of seven of the following polyalcohols: glycerol, sorbitol, xylitol, glucose, sucrose, maltose and fructose. The ratio of ccNADES components was optimized for maximizing caffeine solubility at room temperature. Additionally, temperature dependent solubility was measured for the first four systems exhibiting the highest solubility potential, both in their neat forms and in mixtures with water. Results were used for intermolecular interactions assessments using the COSMO-RS-DARE approach, which led to a perfect match between experimental and computed solubility values. An important methodological discussion was provided for an appropriate definition of the systems. Surprising linear trends were observed between the values of fitting parameters and water-ccNADES composition. In addition, comments on selection of the values of the fusion thermodynamic parameters were provided, which led to the conclusion that COSMO-RS-DARE solubility computations can effectively compensate for the inaccuracies of these important physicochemical properties.

Curcumin and n-acetylcysteine cocrystal produced with supercritical solvent: characterization, solubility, and preclinical evaluation of antinociceptive and anti-inflammatory activities

Curcumin presents a promising anti-inflammatory potential, but its low water-solubility and bioavailability hinder its application. In this sense, cocrystallization represents a tool for improving physicochemical properties, solubility, permeability, and bioavailability of new drug candidates. Thus, the aim of this work was to produce curcumin cocrystals (with n-acetylcysteine as coformer, which possesses anti-inflammatory and antioxidant activities), by the anti-solvent gas technique using supercritical carbon dioxide, and to test its antinociceptive and anti-inflammatory potential. The cocrystal was characterized by differential scanning calorimetry, powder X-ray diffraction and scanning electron microscopy. The cocrystal solubility and antichemotaxic activity were also assessed in vitro. Antinociceptive and anti-inflammatory activities were carried out in vivo using the acetic acid-induced abdominal writhing and carrageenan-induced paw oedema assays in mice. The results demonstrated the formation of a new crystalline structure, thereby confirming the successful formation of the cocrystal. The higher solubility of the cocrystal compared to pure curcumin was verified in acidic and neutral pH, and the cocrystal inhibited the chemotaxis of neutrophils in vitro. In vivo assays showed that cocrystal presents increased antinociceptive and anti-inflammatory potency when compared to pure curcumin, which could be related to an improvement in its bioavailability.

Solubility and permeability enhancement of BCS class IV drug ribociclib through cocrystallization

Cocrystallization improves the solubility and permeability of BCS class IV anticancer drug ribociclib as a cocrystal with resorcinol and as a salt hydrate with vanillic acid.

Pharmaceutical cocrystals: A review of preparations, physicochemical properties and applications

Pharmaceutical cocrystals are multicomponent systems in which at least one component is an active pharmaceutical ingredient and the others are pharmaceutically acceptable ingredients. Cocrystallization of a drug substance with a coformer is a promising and emerging approach to improve the performance of pharmaceuticals, such as solubility, dissolution profile, pharmacokinetics and stability. This review article presents a comprehensive overview of pharmaceutical cocrystals, including preparation methods, physicochemical properties, and applications. Furthermore, some examples of drug cocrystals are highlighted to illustrate the effect of crystal structures on the various aspects of active pharmaceutical ingredients, such as physical stability, chemical stability, mechanical properties, optical properties, bioavailability, sustained release and therapeutic effect. This review will provide guidance for more efficient design and manufacture of pharmaceutical cocrystals with desired physicochemical properties and applications.

Pulmonary Drug Delivery of Antimicrobials and Anticancer Drugs Using Solid Dispersions

It is well established that currently available inhaled drug formulations are associated with extremely low lung deposition. Currently available technologies alleviate this low deposition problem via mixing the drug with inert larger particles, such as lactose monohydrate. Those inert particles are retained in the inhalation device or impacted in the throat and swallowed, allowing the smaller drug particles to continue their journey towards the lungs. While this seems like a practical approach, in some formulations, the ratio between the carrier to drug particles can be as much as 30 to 1. This limitation becomes more critical when treating lung conditions that inherently require large doses of the drug, such as antibiotics and antivirals that treat lung infections and anticancer drugs. The focus of this review article is to review the recent advancements in carrier free technologies that are based on coamorphous solid dispersions and cocrystals that can improve flow properties, and help with delivering larger doses of the drug to the lungs.

A combined experimental and theoretical study of miconazole salts and cocrystals: crystal structures, DFT computations, formation thermodynamics and solubility improvement

Experimental and theoretical screening of multi-component crystal forms of miconazole (MCL), an antifungal drug, with ten aliphatic dicarboxylic acids was performed. Seven multi-component molecular crystals were isolated and identified by different analytical techniques, including the powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), and solubility methods. The crystal structures of the MCL hemihydrate, two cocrystals with succinic ([MCL + SucAc] (2 : 1)) and fumaric acids ([MCL + FumAc] (2 : 1)) and one salt with maleic acid ([MCL + MleAc] (1 : 1)) were redetermined. The new cocrystal of MCL with adipic acid ([MCL + AdpAc] (2 : 1)) was investigated by single crystal X-ray diffractometry. It was found that the AdpAc molecule in the cocrystal has an unusual anticlinal conformation. The combination of periodic density functional theory (DFT) computations and quantum topology analysis confirmed the structure-directing role of the acid-imidazole heterosynthon for the considered crystals. The melting temperatures of all the studied multi-component crystals are between the values of the corresponding individual components except [MCL + MleAc] (1 : 1). A thermal analysis has shown that the thermodynamic and thermophysical characteristics of the considered two-component molecular crystals are strongly dependent both on specific interactions (presence of sites of donor-acceptor interactions and hydrogen bond formation) and on nonspecific interactions - molecule polarizability. Based on the sublimation thermodynamics database of molecular crystals, the standard sublimation thermodynamic functions of MCL were evaluated. The thermodynamic functions of multi-component crystal formation based on MCL were calculated and analyzed. Solubility experiments on the MCL multi-component crystals were carried out in isotonic aqueous buffer solutions at pH 1.2 and 6.8 and compared with the solubility of the MCL free base and its nitrate salt. It was found that the salt/cocrystal formation of MCL with dicarboxylic acids considerably increased the MCL solubility in pH 6.8 buffer. The biggest MCL solubility enhancement was observed in the [MCL + TartAc] (1 : 1) salt. The solubility value of MCL in the [MCL + TartAc] (1 : 1) salt is commensurate with the commercial MCL nitrate salt.

Development of Pelubiprofen Tromethamine with Improved Gastrointestinal Safety and Absorption

Pelubiprofen (PEL), which is a commercialized non-steroidal anti-inflammatory drug (NSAID), is associated with the risk of gastrointestinal (GI) adverse events following long-term exposure and has poor water-soluble properties. Here, a new pelubiprofen tromethamine (PEL-T) with improved solubility, permeability, GI safety, and absorption, compared to PEL, has been developed. The nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR) results confirmed that the PEL-T was well formed. The powder of PEL-T showed the presence of additional 6H protons at δ 3.66-3.61 in the ¹H NMR spectrum, and shifted the sharp endothermic peaks at 129 °C in DSC, and the spectrum of distinct absorption peaks in FT-IR. In addition, compared with PEL, PEL-T showed a significantly improved solubility in various media and an increased permeability coefficient (K_p) in Caco-2 cells. Furthermore, compared to PEL oral administration, PEL-T was found to significantly reduce the damaged area in an acute gastric damage rat model. The pharmacokinetic study of the PEL-T powder showed higher maximum plasma concentration (C_max) and area under the plasma concentration-time curve from 0 h to the last time point (AUC_t) than those of the PEL powder. Taken together, our data suggest that PEL-T is a recommendable candidate with enhanced gastrointestinal safety and better absorption compared with commercial PEL.

A Hyaluronic Acid Functionalized Self-Nano-Emulsifying Drug Delivery System (SNEDDS) for Enhancement in Ciprofloxacin Targeted Delivery against Intracellular Infection

Ciprofloxacin (CIP), a potent anti-bacterial agent of the fluroquinolone family, shows poor solubility and permeability, thus leading to the development of intracellular pathogens induced multi-drug resistance and biofilms formation. To synergistically improve the biopharmaceutical parameters of CIP, a hyaluronic acid (FDA approved biocompatible polymer) functionalized self-nano emulsifying drug delivery system (HA-CIP-SNEDDS) was designed in the present study. SNEDDS formulations were tested via solubility, droplet size, zeta potential, a polydispersity index, thermodynamic stability, surface morphology, solid-state characterization, drug loading/release, cellular uptake, and biocompatibility. The final (HA-CIP-SNEDDS) formulation exhibited a mean droplet size of 50 nm with the 0.3 poly dispersity index and negative zeta potential (-11.4 mV). HA-based SNEDDS containing CIP showed an improved ability to permeate goat intestinal mucus. After 4 h, CIP-SNEDDS showed a 2-fold and HA-CIP-SNEDDS showed a 4-fold permeation enhancement as compared to the free CIP. Moreover, 80% drug release of HA-CIP-SNEDDS was demonstrated to be superior and sustained for 72 h in comparison to free CIP. However, anti-biofilm activity of HA-CIP-SNEDDS against Salmonella typhi was higher than CIP-SNEDDS and free CIP. HA-CIP-SNEDDS exhibited increased biocompatibility and improved oral pharmacokinetics as compared to free CIP. Taken together, HA-CIP-SNEDDS formulation seems to be a promising agent against Salmonella typhi with a strong targeting potential.

Inspiration for revival of old drugs: improving solubility and avoiding hygroscopicity of pipemidic acid by forming two pharmaceutical salts based on charge-assisted hydrogen bond recognitions

Improving solubility and avoiding hygroscopicity of pipemidic acid by forming pharmaceutical salts based on CAHBs.