Synthesis of lamivudine stearate and antiviral activity of stearic acid-g-chitosan oligosaccharide polymeric micelles delivery system

Efavirenz Repurposing Challenges: A Novel Nanomicelle-Based Antiviral Therapy Against Mosquito-Borne Flaviviruses

Background/Objective: World Health Organization latest statistics state that 17% of infectious diseases are transmitted by vectors, causing more than 700,000 deaths each year. Particularly, dengue (DENV), Zika (ZIKV) and yellow fever (YFV) viral infections have generated international awareness due to their epidemic proportion and risks of international spread. In this framework, the repositioning strategy of Efavirenz (EFV) represents a key clinical feature to improve different antiviral therapies. Therefore, the development of Soluplus®-based nanomicelles (NMs) loaded with EFV (10 mg/mL) for optimized oral pharmacotherapy against ZIKV, DENV and YFV infections was investigated. Methods: EFV-NMs were obtained by an acetone diffusion technique. Micellar size and in vitro micellar interaction with mucin were assessed by dynamic light scattering. In vitro cytocompatibility was investigated in A549 and Vero cells and micellar in vitro antiviral activity against ZIKV, DENV and YFV was evaluated. In vivo oral bioavailability and histological studies were assessed in Wistar rats. Results: EFV encapsulation within Soluplus® NMs increased the drug's apparent aqueous solubility up to 4803-fold with a unimodal micellar size distribution and a micellar size of ~90 nm at 25 and 37 °C. Micellar in vitro interaction with mucin was also assessed in a pH range of 1.2-7.5 and its storage micellar physicochemical stability at 4 °C was confirmed over 2 years. In vitro cytocompatibility assays in A549 and Vero cells confirmed that EFV micellar dispersions resulted in safe nanoformulations. Interestingly, EFV-loaded NMs exhibited significantly higher in vitro antiviral activity compared with EFV solution for all the tested flaviviruses. In addition, the selectivity index (SI) values reveal that EFV-loaded NMs exhibited considerably more biological efficacy compared to EFV solution in A549 and Vero cell lines and for each viral infection (SI > 10). Further, the drug pharmacokinetics parameters were enhanced after the oral administration of EFV-loaded NMs, being biocompatible by not causing damage in the gastrointestinal segments. Conclusions: Overall, our EFV nanoformulation highlighted its potential as a novel drug delivery platform for optimized ZIKV, DENV and YFV antiviral therapy.

Nanotechnology in medicine revolutionizing drug delivery for cancer and viral infection treatments

Advancements in nanotechnology were vastly applied in medicine and pharmacy, especially in the field of nano-delivery systems. It took a long time for these systems to ensure precise delivery of very delicate molecules, such as RNA, to cells at concentrations that yield remarkable efficiency, with success rates reaching 95.0% and 94.5%. These days, there are several advantages of using nanotechnological solutions in the prevention and treatment of cancer and viral infections. Its interventions improve treatment outcomes both due to increased effectiveness of the drug at target location and by reducing adverse reactions, thereby increasing patient adherence to the therapy. Based on the current knowledge an updated review was made, and perspective, opportunities and challenges in nanomedicine were discussed. The methods employed include comprehensive examination of existing literature and studies on nanoparticles and nano-delivery systems including both in vitro tests performed on cell cultures and in vivo assessments carried out on appropriate animal models, with a specific emphasis on their applications in oncology and virology. This brings together various aspects including both structure and formation as well as its association with characteristic behaviour in organisms, providing a novel perspective. Furthermore, the practical application of these systems in medicine and pharmacy with a focus on viral diseases and malignancies was explored. This review can serve as a valuable guide for fellow researchers, helping them navigate the abundance of findings in this field. The results indicate that applications of nanotechnological solutions for the delivery of medicinal products improving therapeutic outcomes will continue to expand.

The Application of Prodrugs as a Tool to Enhance the Properties of Nucleoside Reverse Transcriptase Inhibitors

Antiretroviral Therapy (ART) is an effective treatment for human immunodeficiency virus (HIV) which has transformed the highly lethal disease, acquired immunodeficiency syndrome (AIDS), into a chronic and manageable condition. However, better methods need to be developed for enhancing patient access and adherence to therapy and for improving treatment in the long term to reduce adverse effects. From the perspective of drug discovery, one promising strategy is the development of anti-HIV prodrugs. This approach aims to enhance the efficacy and safety of treatment, promoting the development of more appropriate and convenient systems for patients. In this review, we discussed the use of the prodrug approach for HIV antiviral agents and emphasized nucleoside reverse transcriptase inhibitors. We comprehensively described various strategies that are used to enhance factors such as water solubility, bioavailability, pharmacokinetic parameters, permeability across biological membranes, chemical stability, drug delivery to specific sites/organs, and tolerability. These strategies might help researchers conduct better studies in this field. We also reported successful examples from the primary therapeutic classes while discussing the advantages and limitations. In this review, we highlighted the key trends in the application of the prodrug approach for treating HIV/AIDS.

Advances in Antiviral Delivery Systems and Chitosan-Based Polymeric and Nanoparticulate Antivirals and Antiviral Carriers

Current antiviral therapy research is focused on developing dosage forms that enable highly effective drug delivery, providing a selective effect in the organism, lower risk of adverse effects, a lower dose of active pharmaceutical ingredients, and minimal toxicity. In this article, antiviral drugs and the mechanisms of their action are summarized at the beginning as a prerequisite background to develop relevant drug delivery/carrier systems for them, classified and briefly discussed subsequently. Many of the recent studies aim at different types of synthetic, semisynthetic, and natural polymers serving as a favorable matrix for the antiviral drug carrier. Besides a wider view of different antiviral delivery systems, this review focuses on advances in antiviral drug delivery systems based on chitosan (CS) and derivatized CS carriers. CS and its derivatives are evaluated concerning methods of their preparation, their basic characteristics and properties, approaches to the incorporation of an antiviral drug in the CS polymer as well as CS nanoparticulate systems, and their recent biomedical applications in the context of actual antiviral therapy. The degree of development (i.e., research study, in vitro/ex vivo/in vivo preclinical testing), as well as benefits and limitations of CS polymer and CS nanoparticulate drug delivery systems, are reported for particular viral diseases and corresponding antivirotics.

Advances in Nanoparticle Drug Delivery Systems for Anti-Hepatitis B Virus Therapy: A Narrative Review

Chronic hepatitis B (CHB) is an infectious viral disease that is prevalent worldwide. Traditional nucleoside analogues, as well as the novel drug targets against hepatitis B virus (HBV), are associated with certain critical factors that influence the curative effect, such as biological stability and safety, effective drug delivery, and controlled release. Nanoparticle drug delivery systems have significant advantages and have provided a basis for the development of anti-HBV strategies. In this review, we aim to review the advances in nanoparticle drug delivery systems for anti-hepatitis B virus therapy by summarizing the relevant literature. First, we focus on the characteristics of nanoparticle drug delivery systems for anti-HBV therapy. Second, we discuss the nanoparticle delivery systems for anti-HBV nucleoside drugs, gene-based drugs, and vaccines. Lastly, we provide an overview of the prospects for nanoparticle-based anti-HBV agents.

Nanomedicine based approaches for combating viral infections

Millions of people die each year from viral infections across the globe. There is an urgent need to overcome the existing gap and pitfalls of the current antiviral therapy which include increased dose and dosing frequency, bioavailability challenges, non-specificity, incidences of resistance and so on. These stumbling blocks could be effectively managed by the advent of nanomedicine. Current review emphasizes over an enhanced understanding of how different lipid, polymer and elemental based nanoformulations could be potentially and precisely used to bridle the said drawbacks in antiviral therapy. The dawn of nanotechnology meeting vaccine delivery, role of RNAi therapeutics in antiviral treatment regimen, various regulatory concerns towards clinical translation of nanomedicine along with current trends and implications including unexplored research avenues for advancing the current drug delivery have been discussed in detail.

Nanotechnology Interventions in the Management of COVID-19: Prevention, Diagnosis and Virus-Like Particle Vaccines

SARS-CoV-2 claimed numerous lives and put nations on high alert. The lack of antiviral medications and the small number of approved vaccines, as well as the recurrence of adverse effects, necessitates the development of novel treatment ways to combat COVID-19. In this context, using databases such as PubMed, Google Scholar, and Science Direct, we gathered information about nanotechnology's involvement in the prevention, diagnosis and virus-like particle vaccine development. This review revealed that various nanomaterials like gold, polymeric, graphene and poly amino ester with carboxyl group coated magnetic nanoparticles have been explored for the fast detection of SARS-CoV-2. Personal protective equipment fabricated with nanoparticles, such as gloves, masks, clothes, surfactants, and Ag, TiO2 based disinfectants played an essential role in halting COVID-19 transmission. Nanoparticles are used not only in vaccine delivery, such as lipid nanoparticles mediated transport of mRNA-based Pfizer and Moderna vaccines, but also in the development of vaccine as the virus-like particles elicit an immune response. There are now 18 virus-like particle vaccines in pre-clinical development, with one of them, developed by Novavax, reported being in phase 3 trials. Due to the probability of upcoming COVID-19 waves, and the rise of new diseases, the future relevance of virus-like particles is imperative. Furthermore, psychosocial variables linked to vaccine reluctance constitute a critical problem that must be addressed immediately to avert pandemic.

Advances in chitooligosaccharides chemical modifications

Chitooligosaccharides (COS) differ from chitosan by their molar mass: those of COS are defined to be lower than 20 kg mol^-1 . Their functionalization is widely described in the literature and leads to the introduction of new properties that broaden their application fields. Like chitosan, COS modification sites are mainly primary amine and hydroxyl groups. Among their chemical modification, one can find amidation or esterification, epoxy-amine/hydroxyl coupling, Schiff base formation, and Michael addition. When depolymerized through nitrous deamination, COS bear an aldehyde at the chain end that can open the way to other chemical reactions and lead to the synthesis of new interesting amphiphilic structures. This article details the recent developments in COS functionalization, primarily focusing on amine and hydroxyl groups and aldehyde-chain end reactions, as well as paying considerable attention to other types of modification. We also describe and compare the different functionalization protocols found in the literature while highlighting potential mistakes made in the chemical structures accompanied with suggestions. Such chemical modification can lead to new materials that are generally nontoxic, biobased, biodegradable, and usable in various applications.

Polymer-based nano-therapies to combat COVID-19 related respiratory injury: progress, prospects, and challenges

The recent coronavirus disease-2019 (COVID-19) outbreak has increased at an alarming rate, representing a substantial cause of mortality worldwide. Respiratory injuries are major COVID-19 related complications, leading to poor lung circulation, tissue scarring, and airway obstruction. Despite an in-depth investigation of respiratory injury's molecular pathogenesis, effective treatments have yet to be developed. Moreover, early detection of viral infection is required to halt the disease-related long-term complications, including respiratory injuries. The currently employed detection technique (quantitative real-time polymerase chain reaction or qRT-PCR) failed to meet this need at some point because it is costly, time-consuming, and requires higher expertise and technical skills. Polymer-based nanobiosensing techniques can be employed to overcome these limitations. Polymeric nanomaterials have the potential for clinical applications due to their versatile features like low cytotoxicity, biodegradability, bioavailability, biocompatibility, and specific delivery at the targeted site of action. In recent years, innovative polymeric nanomedicine approaches have been developed to deliver therapeutic agents and support tissue growth for the inflamed organs, including the lung. This review highlights the most recent advances of polymer-based nanomedicine approaches in infectious disease diagnosis and treatments. This paper also focuses on the potential of novel nanomedicine techniques that may prove to be therapeutically efficient in fighting against COVID-19 related respiratory injuries.

Nanotechnology-based antiviral therapeutics

The host immune system is highly compromised in case of viral infections and relapses are very common. The capacity of the virus to destroy the host cell by liberating its own DNA or RNA and replicating inside the host cell poses challenges in the development of antiviral therapeutics. In recent years, many new technologies have been explored for diagnosis, prevention, and treatment of viral infections. Nanotechnology has emerged as one of the most promising technologies on account of its ability to deal with viral diseases in an effective manner, addressing the limitations of traditional antiviral medicines. It has not only helped us to overcome problems related to solubility and toxicity of drugs, but also imparted unique properties to drugs, which in turn has increased their potency and selectivity toward viral cells against the host cells. The initial part of the paper focuses on some important proteins of influenza, Ebola, HIV, herpes, Zika, dengue, and corona virus and those of the host cells important for their entry and replication into the host cells. This is followed by different types of nanomaterials which have served as delivery vehicles for the antiviral drugs. It includes various lipid-based, polymer-based, lipid-polymer hybrid-based, carbon-based, inorganic metal-based, surface-modified, and stimuli-sensitive nanomaterials and their application in antiviral therapeutics. The authors also highlight newer promising treatment approaches like nanotraps, nanorobots, nanobubbles, nanofibers, nanodiamonds, nanovaccines, and mathematical modeling for the future. The paper has been updated with the recent developments in nanotechnology-based approaches in view of the ongoing pandemic of COVID-19.Graphical abstract.

Chitosan-Based Nanoparticles Against Viral Infections

Viral infections, in addition to damaging host cells, can compromise the host immune system, leading to frequent relapse or long-term persistence. Viruses have the capacity to destroy the host cell while liberating their own RNA or DNA in order to replicate within additional host cells. The viral life cycle makes it challenging to develop anti-viral drugs. Nanotechnology-based approaches have been suggested to deal effectively with viral diseases, and overcome some limitations of anti-viral drugs. Nanotechnology has enabled scientists to overcome the challenges of solubility and toxicity of anti-viral drugs, and can enhance their selectivity towards viruses and virally infected cells, while preserving healthy host cells. Chitosan is a naturally occurring polymer that has been used to construct nanoparticles (NPs), which are biocompatible, biodegradable, less toxic, easy to prepare, and can function as effective drug delivery systems (DDSs). Furthermore, chitosan is Generally Recognized as Safe (GRAS) by the US Food and Drug Administration (U.S. FDA). Chitosan NPs have been used in drug delivery by the oral, ocular, pulmonary, nasal, mucosal, buccal, or vaginal routes. They have also been studied for gene delivery, vaccine delivery, and advanced cancer therapy. Multiple lines of evidence suggest that chitosan NPs could be used as new therapeutic tools against viral infections. In this review we summarize reports concerning the therapeutic potential of chitosan NPs against various viral infections.

Functionalization of Chitosan Oligomers: From Aliphatic Epoxide to Cardanol-Grafted Oligomers for Oil-in-Water Emulsions

Hydrophobically modified chitooligosaccharides (COSs) were tested for suitability as an emulsifier in cationic bituminous emulsions. COSs with polymerization degrees (DPs) of 5, 10, 15, and 20 were obtained by nitrous acid deamination. A complete study on depolymerization and precise product and side product characterization was undergone. Chemical modification of COSs was performed to achieve amphiphilic structures using three fatty epoxides with a growing chain length butyl (C4), octadecyl (C9), and hexadecyl glycidyl ether (C16)). The grafting efficiency according to reaction conditions was established. Different substitution degrees (DSs) were obtained by modulating the ratio of fatty epoxy to NH₂. It was shown that after a certain DS, the oligomers thus formed were not water-soluble anymore. At the end, cardanol glycidyl ether was grafted on DP 5, 10, and 15 COSs, cardanol being a biobased compound extracted from cashew nut shell; this reaction led to a potentially fully biobased structure. Water-soluble candidates with a higher DS were used as surfactants to emulsify motor oil as a simulation of bitumen. Cardanol-chitosan-based surfactants led to direct oil-in-water emulsion (60/40 w/w) composed of particles of 15 μm average size that were stable at least for 24 h.

Modulation of Macrophages M1/M2 Polarization Using Carbohydrate-Functionalized Polymeric Nanoparticles

Exploiting surface endocytosis receptors using carbohydrate-conjugated nanocarriers brings outstanding approaches to an efficient delivery towards a specific target. Macrophages are cells of innate immunity found throughout the body. Plasticity of macrophages is evidenced by alterations in phenotypic polarization in response to stimuli, and is associated with changes in effector molecules, receptor expression, and cytokine profile. M1-polarized macrophages are involved in pro-inflammatory responses while M2 macrophages are capable of anti-inflammatory response and tissue repair. Modulation of macrophages’ activation state is an effective approach for several disease therapies, mediated by carbohydrate-coated nanocarriers. In this review, polymeric nanocarriers targeting macrophages are described in terms of production methods and conjugation strategies, highlighting the role of mannose receptor in the polarization of macrophages, and targeting approaches for infectious diseases, cancer immunotherapy, and prevention. Translation of this nanomedicine approach still requires further elucidation of the interaction mechanism between nanocarriers and macrophages towards clinical applications.

Preparation and Evaluation of Novel Emodin-loaded Stearic Acid-g-chitosan Oligosaccharide Nanomicelles

The purpose of this study was to prepare and characterize emodin-loaded stearic acid-g-chitosan oligosaccharide (CSO-SA/EMO) and to evaluate its antitumor activity in vitro. In this study, stearic acid-g-chitosan oligosaccharide was used as a carrier and its physicochemical properties were determined by different methods. Cell uptake behavior was examined using FITC-labeled stearic acid-g-chitosan oligosaccharide. CSO-SA/EMO was prepared using ultrasonication and dialysis. Particle size, surface potential, entrapment efficiency, and drug release behavior were studied in vitro. The effects of CSO-SA/EMO on gastric cancer cells were investigated using MTT assay and flow cytometry. Results showed CSO-SA/EMO particle size was larger and potential was smaller than that of stearic acid-g-chitosan oligosaccharide. The 12 h micellar uptake by MGC803 and BGC823 cells was sufficient, and the micelles were able to abundantly accumulate at lesion sites in mice thus achieving good passive EPR targeting. MTT and cell cycle arrest assays showed CSO-SA/EMO-enhanced antitumor activity significantly towards MGC803 and BGC823 cells compared with that of free emodine. Tumor volume, hematoxylin and eosin staining, and terminal deoxynucleotide transferase dUTP nick-end labeling assay proved CSO-SA/EMO had a significant antitumor effect on tumor tissues in vivo. In conclusion, the ultrasonication-dialysis method provided a simple and effective method for preparing CSO-SA/EMO. The delivery of emodine using a micelle system improved its antitumor effects effectively.

Formation of Chitosan/Sodium Phytate/Nano-Fe3O4 Magnetic Coatings on Wood Surfaces via Layer-by-Layer Self-Assembly

Magnetic wood would have potential uses in electromagnetic shielding and electromagnetic wave absorption. In this paper, magnetic coatings on a wood surface were synthesized using a layer-by-layer self-assembly method. As the cationic polyelectrolyte carrier, natural macromolecular chitosan was pre-immobilized on a wood surface first, followed by the alternate adsorption of anionic polyelectrolyte sodium phytate and positively-charged Fe3O4 nanoparticles. The concentration of pH-controlled chitosan solution, sodium phytate solution, and Fe3O4 nanoparticle suspension, soaking time, and the number of alternating sedimentary layers varied. The morphology and crystal structure of the Fe3O4 modified wood samples were studied using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The magnetic hysteresis loops showed that the modified wood had magnetic properties which were improved as the number of assembled layers increased.

Carbohydrate-based nanocarriers and their application to target macrophages and deliver antimicrobial agents

Many deadly infections are produced by microorganisms capable of sustained survival in macrophages. This reduces exposure to chemadrotherapy, prevents immune detection, and is akin to criminals hiding in police stations. Therefore, the use of glyco-nanoparticles (GNPs) as carriers of therapeutic agents is a burgeoning field. Such an approach can enhance the penetration of drugs into macrophages with specific carbohydrate targeting molecules on the nanocarrier to interact with macrophage lectins. Carbohydrates are natural biological molecules and the key constituents in a large variety of biological events such as cellular communication, infection, inflammation, enzyme trafficking, cellular migration, cancer metastasis and immune functions. The prominent characteristics of carbohydrates including biodegradability, biocompatibility, hydrophilicity and the highly specific interaction of targeting cell-surface receptors support their potential application to drug delivery systems (DDS). This review presents the 21^st century development of carbohydrate-based nanocarriers for drug targeting of therapeutic agents for diseases localized in macrophages. The significance of natural carbohydrate-derived nanoparticles (GNPs) as anti-microbial drug carriers is highlighted in several areas of treatment including tuberculosis, salmonellosis, leishmaniasis, candidiasis, and HIV/AIDS.

Influence of Solvent Evaporation Technique Parameters on Diameter of Submicron Lamivudine-Poly-ε-Caprolactone Conjugate Particles

The size of active pharmaceutical ingredient carrier is one of the key properties considered during design of submicron drug delivery systems. Particle diameter may determine drug biodistribution, cellular uptake, and elimination path. Solvent evaporation technique is a flexible method of particle preparation, in which various macromolecules and drugs may be employed. Parameters of emulsion obtained as first step of particle preparation are crucial in terms of particle size, drug loading, and morphology. The aim of the study was to investigate the influence of emulsion preparation parameters on diameter of resulting particles. Impact of surfactant type and concentration, homogenization time, homogenization rate, phase ratio, and conjugate concentration were evaluated. Model drug lamivudine was covalently bound to polymer and applied in solvent evaporation method in order to overcome issues related to drug loading and provide method-independent incorporation. Synthesized drug-polymer conjugate and obtained particles were evaluated via dynamic light scattering, chromatography, scanning electron microscopy, and spectroscopic methods. Covalent bonding between drug and polymeric chain was confirmed, estimated drug content per milligram of conjugate was 19 μg. Among employed colloid stabilizer, poly(vinyl alcohol) was proven to be most effective. Homogenization rate and surfactant concentration were identified as crucial parameters in terms of particle diameter control.

Redox-responsive chitosan oligosaccharide-SS-Octadecylamine polymeric carrier for efficient anti-Hepatitis B Virus gene therapy

DrzBC and DrzBS (10-23 DNAzyme) could block the expression of HBV e- and s- gene respectively. But the application of 10-23 DNAzyme was limited owing to the lack of appropriate delivery vehicles. Chitosan oligosaccharide-SS-Octadecylamine (CSSO), a redox-responsive nano-sized polymeric carrier, could self-aggregate and bind with DNA by electrostatic interaction at proper mass ratio. Compared with the traditional commercial carrier Lipo2000, CSSO exhibited lower cytotoxicity, efficient cellular uptake by targeting cells, and rapidly DNA released in cytoplasm after escaping from endosomes. Including the same DNA concentration, Lipo2000/(DrzBC or DrzBS) showed maximum inhibitory rate on HBeAg (47.29 ± 1.86%) and HBsAg (33.58 ± 0.72%) secretion after 48 h incubation, and then both decreased. In contrast, HBeAg secretion inhibition by CSSO/DrzBC and HBsAg secretion inhibition by CSSO/DrzBS were up to 73.86 ± 1.77% and 67.80 ± 2.51% at 48 h, and further increased to 83.83 ± 2.34% and 76.79 ± 2.18% at 72 h, respectively. CSSO is a promising redox-responsive polymeric carrier for efficient anti-Hepatitis B Virus gene therapy.

Hepatitis B virus S gene therapy with 10-23 DNAzyme delivered by chitosan-g-stearic acid micelles

DrzBS, which targets HBV S gene expression, has important research significance and potential application value. CSO-SA is a safe and efficient non-viral gene carrier and CSO-SA/DrzBS micelles are a promising application for anti-HBV gene therapy.

Drug Delivery Strategies for Antivirals against Hepatitis B Virus

Chronic hepatitis B virus (HBV) infection poses a significant health challenge due to associated morbidity and mortality from cirrhosis and hepatocellular cancer that eventually results in the breakdown of liver functionality. Nanotechnology has the potential to play a pivotal role in reducing viral load levels and drug-resistant HBV through drug targeting, thus reducing the rate of evolution of the disease. Apart from tissue targeting, intracellular delivery of a wide range of drugs is necessary to exert a therapeutic action in the affected organelles. This review encompasses the strategies and techniques that have been utilized to target the HBV-infected nuclei in liver hepatocytes, with a significant look at the new insights and most recent advances in drug carriers and their role in anti-HBV therapy.

Multiple Lipid Nanoparticles (MLN), a New Generation of Lipid Nanoparticles for Drug Delivery Systems: Lamivudine-MLN Experimental Design

PURPOSE

An optimized methodology for the development of a new generation of lipid nanoparticles, the multiple lipid nanoparticles (MLN) is described. MLN have characteristics between nanostructured lipid carriers (NLC) and multiple emulsions (W/O/W), but without the outer aqueous phase.

METHODS

The production is based on a hot homogenization method combined with high shear and ultrasonication. The antiretroviral agent lamivudine (3TC), was loaded in the MLN. For comparison purposes, NLC-3TC formulation was also developed and physico-chemically characterized by the same parameters as MLN-3TC. The development and optimization of MLN and NLC formulations were supported by a Quality by Design (QbD) approach.

RESULTS

The MLN-3TC formulation exhibited a size of about 450 nm, polydispersity <0.3 and negative zeta potential > -20 mV. Furthermore, the morphology assessed by TEM showed a structure with multiples aqueous vacuoles. MLN-3TC was physically stable for at least 45 days, had low cytotoxicity and drug release studies showed a sustained and controlled release of 3TC under gastric and plasma-simulated conditions (at pH 7.4 for about 45 h).

CONCLUSIONS

The optimized formulations present suitable profiles for oral administration. Overall, the results reveal that MLN present higher loading capacity and storage stability than NLC.

Engineering of lipid prodrug-based, hyaluronic acid-decorated nanostructured lipid carriers platform for 5-fluorouracil and cisplatin combination gastric cancer therapy

PURPOSE

The first-line chemotherapy treatment protocol for gastric cancer is combination chemotherapy of 5-fluorouracil (5-FU) and cisplatin (CDDP). The aim of this study was to engineer prodrug-based nanostructured lipid carriers (NLC) platform for codelivery of 5-FU and CDDP to enhance therapy and decrease toxicity.

METHODS

First, 5-FU-stearic acid lipid conjugate was synthesized by two steps. Second, 5-FU-stearic acid prodrug and CDDP were loaded in NLC. Finally, hyaluronic acid (HA) was coated onto NLC surface. Average size, zeta potential, and drug loading capacity of NLC were evaluated. Human gastric cancer cell line BGC823 (BGC823 cells) was used for the testing of in vitro cytotoxicity assays. In vivo antitumor activity of NLC was evaluated in mice bearing BGC823 cells model.

RESULTS

HA-coated 5-FU-stearic acid prodrug and CDDP-loaded NLC (HA-FU/C-NLC) showed a synergistic effect in combination therapy and displayed the greatest antitumor activity than all of the free drugs or uncoated NLC in vitro and in vivo.

CONCLUSION

This work reveals that HA-coated NLC could be used as a novel carrier to code-liver 5-FU and CDDP for gastric cancer therapy. HA-FU/C-NLC could be a promising targeted and combinational therapy in nanomedicine.

Natural Cationic Polymers for Advanced Gene and Drug Delivery

Gene and drug delivery is becoming more and more important in the treatment of complicated human diseases. Proper gene/drug delivery systems can effectively enhance therapeutic efficiency and minimize various side-effects. To date, a variety of delivery systems have been developed. Different from synthetic materials, natural polymers are abundant in nature, renewable, non-toxic, biocompatible and biodegradable. Owing to the presence of positive charges, natural cationic polymers have found important applications in many biological fields, such as drug/gene delivery and tissue engineering. In gene delivery, natural cationic polymers can condense nucleic acids, protect them from degradation, lower the immunogenicity and improve overall transfection efficiency. In drug delivery, cationic functional groups can alter the amphiphilic properties of the polymers to ensure their suitable applications for delivering hydrophobic or protein drugs. After simple chemical modification, the derivatives of natural cationic polymers show improved performance as functional delivery carriers. In this chapter, details on the chemical modification of natural cationic polymers and their applications in gene/drug delivery is discussed.

Amphiphilic polysaccharide nanocarriers with antioxidant properties

The development of self-assembled nanocarriers for the encapsulation of hydrophobic antioxidants is of growing interest. Self-assembled amphiphilic chitosan conjugate nanocarriers that stabilize antioxidants were prepared based on the concept that both the nanocarrier and the antioxidant bear similar hydrophobic moieties able to establish hydrophobic interactions. This work describes the preparation and characterization of a system consisting of a palmitoyl chitosan conjugate and retinyl palmitate. Palmitic acid was coupled to chitosan using a carbodiimide-mediated coupling reaction, and two different palmitoyl chitosan conjugates were obtained by varying the coupling system. Palmitoyl chitosan conjugates self-assembled to form nanoparticles in aqueous medium varying in mean average diameter (Dh) between 200 and 437 nm. Retinyl palmitate–loaded nanoparticles were prepared by a solvent displacement method using dialysis, with loading efficiencies of 77.5% and 88.6%, loading contents of 12.6% and 14.6%, and Dh values of approximately 280 nm. The zeta potential (ζ) of all palmitoyl chitosan nanoparticle were above 25 mV, but ζ slightly increased in the retinyl palmitate–loaded nanoparticle. Antioxidant activity of loaded nanoparticles was confirmed using the 1,1-diphenyl-2-picryl-hydrazyl radical scavenging assay. The in vitro cytotoxicity of blank and loaded nanoparticles was determined using fibroblasts of human embryonic skin. All nanoparticles were not cytotoxic when they were tested with methylthiazol tetrazolium and lactate dehydrogenase tests. The obtained results suggest that the system has potential as a nanocarrier for dermal application. Additionally, the approach considered in this article can be expanded to other nanocarrier/antioxidant systems.

Preparation, optimization and in vitro characterization of stearoyl-gemcitabine polymeric micelles: a comparison with its self-assembled nanoparticles

Although gemcitabine (Gem) constitutes first-line therapy for pancreatic cancer, its clinical outcome suffers from rapid metabolism and acquired drug resistance. To overcome its limitations, several lipophilic prodrugs including 4-(N)-stearoyl Gem (GemC18) have been studied for their efficacy over Gem. Herein, we aimed to prepare and characterize the GemC18-loaded poly(ethylene glycol)-poly(d,l-lactide) (PEG-PLA) polymeric micelles (PMs) as well as its self-assembled nanoparticles (NPs). A D-optimal design was also utilized to investigate the effects of formulation variables, namely initial drug/polymer ratio, total solid content, and the type of organic solvent on properties of GemC18-loaded PMs. The optimized formulation showed a particle size of about 120 nm, encapsulation efficiency >90%, and a sustained release behavior of the drug. Alternatively, the prodrug NPs were harvested in larger size (∼300 nm) and more negative zeta potential, but less chemical stability compared to the optimized PMs. In Panc-1 and AsPC-1 cell lines, both GemC18-loaded PMs and NPs were significantly more cytotoxic than GemC18 solution. Chiefly, they could effectively reduce the viability of Gem high-resistant AsPC-1 cells in culture, whereas the molar equivalent doses of Gem did not show any acceptable cytotoxicity. Thus, these results suggest a promising direction for alternative Gem delivery systems for future therapeutic applications.

Nanotechnology: a magic bullet for HIV AIDS treatment

Human immunodeficiency virus (HIV) infection has become devastating in last a few years. Nearly 7400 new infection cases are coming every day. Highly active antiretroviral therapy (HAART), which involves combination of at least three antiretroviral (ARV) drugs, has been used to extend the life span of the HIV-infected patients. HAART has played an important role to reduce mortality rate in the developed countries but in the developing countries condition is still worst with millions of people being infected by this disease. For the improvement of the situation, nanotechnology-based drug system has been explored for the HIV therapeutics. Nanosystems used for HIV therapeutics offer some unique advantage like enhancement of bioavailability, water solubility, stability, and targeting ability of ARV drugs. Main nanotechnology-based systems explored for HIV therapeutics are liposomes, nanoparticles, niosomes, polymeric micelles, and dendrimers. Present manuscript reviews conventional method of HIV therapeutics and recent advances in the field of nanotechnology-based systems for treatment of HIV-AIDS.

Systemic delivery of gemcitabine triphosphate via LCP nanoparticles for NSCLC and pancreatic cancer therapy

Nucleoside analogs are a significant class of anti-cancer agent. As prodrugs, they terminate the DNA synthesis upon transforming to their active triphosphate metabolites. We have encapsulated a biologically activate nucleotide analog (i.e. gemcitabine triphosphate (GTP)), instead of the nucleoside (i.e. gemcitabine) derivative, into a novel Lipid/Calcium/Phosphate nanoparticle (LCP) platform. The therapeutic efficacy of LCP-formulated GTP was evaluated in a panel of human non-small-cell lung cancer (NSCLC) and human pancreatic cancer models after systemic administrations. GTP-loaded LCPs induced cell death and arrested the cell cycle in the S phase. In vivo efficacy studies showed that intravenously injected GTP-loaded LCPs triggered effective apoptosis of tumor cells, significant reduction of tumor cell proliferation and cell cycle progression, leading to dramatic inhibition of tumor growth, with little in vivo toxicity. Broadly speaking, the current study offers preclinical proof-of-principle that many active nucleotide or phosphorylated nucleoside analogs could be encapsulated in the LCP nanoplatform and delivered systemically for a wide variety of therapeutic applications.

2-Hydroxypropyl-β-cyclodextrin-modified SLN of paclitaxel for overcoming p-glycoprotein function in multidrug-resistant breast cancer cells

OBJECTIVES

This study aimed to evaluate the potential of solid lipid nanoparticles (SLNs) of paclitaxel (PTX) modified with a 2-hydroxypropyl-β-cyclodextrin system to enhance cellular accumulation of PTX into p-glycoprotein (p-gp)-expressing cells.

METHODS

The PTX-loaded-SLNs consisted of lipid (stearic acid) and surfactants (lecithin and poloxamer 188) and were then modified with 2-hydroxypropyl-β-cyclodextrin by a sonication method.

KEY FINDINGS

In terms of cytotoxicity, PTX-loaded SLNs modified with 2-hydroxypropyl-β-cyclodextrin showed higher cytotoxicity than other formulations. In particular, the cellular uptake of PTX from PTX-loaded SLNs modified with 2-hydroxypropyl-β-cyclodextrin was about 5.8- and 1.5-fold higher than that from PTX solution and unmodified PTX-loaded SLNs in MCF-7/ADR cells, respectively. After a 4-h incubation, clear fluorescence images inside cells were observed over time. When PTX-loaded SLNs modified with 2-hydroxypropyl-β-cyclodextrin were incubated with MCF-7/ADR cells for 4 h, cellular uptake of PTX increased 1.7-fold versus that of PTX in the presence of verapamil.

CONCLUSIONS

These results suggest that optimized SLNs modified with 2-hydroxypropyl-β-cyclodextrin may have potential as an oral drug delivery system for PTX.