Rod-shaped nintedanib nanocrystals improved oral bioavailability through multiple intestinal absorption pathways

Nanocrystals for Intravenous Drug Delivery: Composition Development, Preparation Methods and Applications in Oncology

Intravenous routes of drug delivery are widely used in clinical practice due to the advantages of fast onset of action and avoidance of first-pass effect. Still, it is difficult to develop poorly water-soluble drugs for intravenous administration. In recent years, the application of nanocrystal technology has become more and more widespread, mainly involving reducing the particle size to the nanoparticle size range and improving its physicochemical properties to enhance the bioavailability of drugs. Intravenous nanocrystals (INCs) can show unique advantages in the vasculature, with their high drug loading capacity, low toxicity, and overcoming low solubility, which makes them a new solution in tumor therapy. In addition, INCs are mainly suspended in aqueous/oil phase media, which makes them easy to inject. Therefore, INCs may serve as a novel strategy to address poor water solubility, low bioavailability, and associated toxicity. This review contains the compositional development of INCs, and preparation methods, and provides some insights into their application in oncology.

Inhalable polysorbates stabilized nintedanib nanocrystals to facilitate pulmonary nebulization and alveolar macrophage evasion

Pulmonary delivery of nintedanib has noticeable advantages over the current oral administration in managing idiopathic pulmonary fibrosis (IPF). However, it remains a challenge to construct an efficient lung delivery system for insoluble nintedanib to resist nebulization instabilities and alveolar macrophage clearance. Herein, we attempted to develop nintedanib as inhalable nanocrystals stabilized with polysorbates. Different types of polysorbates (polysorbate 20, 40, 60, 80) and various drug-surfactant molar ratios (DSR = 10, 30, 60) were screened to determine the optimal nintedanib nanocrystal formulation. Most formulations (except those stabilized by polysorbate 40) could tailor nintedanib nanocrystals with sizes around 600 nm, and the nebulization-caused drug loss could be significantly reduced when DSR increased to 60. Meanwhile, all nanocrystals boosted the in vitro drug dissolution rate and improved the aerosol performance of nintedanib. Although nebulization-caused particle aggregation was found in most formulations, the nanocrystal stabilized with polysorbate 80 at DSR 60 presented no apparent size change after nebulization. This formulation exhibited superior alveolar macrophage evasion, enhanced fibroblast cluster infiltration, and improved fibroblast cluster inhibition compared with other formulations, indicating its significant potential for pulmonary nintedanib delivery. Overall, this study explored the potential of polysorbates in stabilizing nintedanib nanocrystals for nebulization and proposed practical solutions to transfer nintedanib from oral to lung delivery.

The application of cyclodextrins in drug solubilization and stabilization of nanoparticles for drug delivery and biomedical applications

Nanoparticles (NPs) have gained significant attention in recent years due to their potential applications in pharmaceutical formulations, drug delivery systems, and various biomedical fields. The versatility of colloidal NPs, including their ability to be tailored with various components and synthesis methods, enables drug delivery systems to achieve controlled release patterns, improved solubility, and increased bioavailability. The review discusses various types of NPs, such as nanocrystals, lipid-based NPs, and inorganic NPs (i.e., gold, silver, magnetic NPs), each offering unique advantages for drug delivery. Despite the promising potential of NPs, challenges such as physical instability and the need for surface stabilization remain. Strategies to overcome these challenges include the use of surfactants, polymers, and cyclodextrins (CDs). This review highlights the role of CDs in stabilizing colloidal NPs and enhancing drug solubility. The combination of CDs with NPs presents a synergistic approach that enhances drug delivery and broadens the range of biomedical applications. Additionally, the potential of CDs to enhance the stability and therapeutic efficacy of colloidal NPs, making them promising candidates for advanced drug delivery systems, is comprehensively reviewed.

Formononetin-Loaded Self-Microemulsion Drug Delivery Systems for Improved Solubility and Oral Bioavailability: Fabrication, Characterization, In Vitro and In Vivo Evaluation

This study aimed to construct a self-microemulsion drug delivery system (SMEDDS) for Formononetin (FMN) to improve its solubility and bioavailability while combining the nanocrystals (NCs) technology. The SMEDDS prescription composition was optimized with a pseudo-three-phase diagram, followed by a series of in vitro and in vivo evaluations of the selected optimal prescriptions. FMN-NCs loaded SMEDDS showed a homogeneous spherical shape in the Transmission electron microscope and the particle size was measured as (20.65 ± 1.42) nm. The in vitro cumulative release rate in each dissolution medium within 30 min was higher than 80%, much higher than that of FMN (6%) and FMN-NCs (40%); Cellular experiments confirm that the formulation has a high safety profile and significantly promotes cellular uptake. The results of pharmacokinetics and intestinal absorption in rats showed that the relative bioavailability of FMN-NCs and FMN-NCs loaded SMEDDS were (154.80 ± 3.76)% and (557.73 ± 32.88)%, respectively, and both of them significantly increased the rate and extent of absorption of the drug in intestinal segments. FMN-NCs loaded SMEDDS significantly enhanced the solubility and bioavailability of FMN.

Drug Nanocrystals in Oral Absorption: Factors That Influence Pharmacokinetics

Despite the safety and convenience of oral administration, poorly water-soluble drugs compromise absorption and bioavailability. These drugs can exhibit low dissolution rates, variability between fed and fasted states, difficulty permeating the mucus layer, and P-glycoprotein efflux. Drug nanocrystals offer a promising strategy to address these challenges. This review focuses on the opportunities to develop orally administered nanocrystals based on pharmacokinetic outcomes. The impacts of the drug particle size, morphology, dissolution rate, crystalline state on oral bioavailability are discussed. The potential of the improved dissolution rate to eliminate food effects during absorption is also addressed. This review also explores whether permeation or dissolution drives nanocrystal absorption. Additionally, it addresses the functional roles of stabilizers. Drug nanocrystals may result in prolonged concentrations in the bloodstream in some cases. Therefore, nanocrystals represent a promising strategy to overcome the challenges of poorly water-soluble drugs, thus encouraging further investigation into unclear mechanisms during oral administration.

Preparation, Characterization and Evaluation of Nintedanib Amorphous Solid Dispersions with Enhanced Oral Bioavailability

The dissolution and bioavailability challenges posed by poorly water-soluble drugs continue to drive innovation in pharmaceutical formulation design. Nintedanib (NDNB) is a typical BCS class II drug that has been utilized to treat idiopathic pulmonary fibrosis (IPF). Due to the low solubility, its oral bioavailability is relatively low, limiting its therapeutical effectiveness. It is crucial to enhance the dissolution and the oral bioavailability of NDNB. In this study, we focused on the preparation of amorphous solid dispersions (ASD) using hot melt extrusion (HME). The formulation employed Kollidon® VA64 (VA64) as the polymer matrix, blended with the NDNB at a ratio of 9:1. HME was conducted at temperatures ranging from 80 °C to 220 °C. The successful preparation of ASD was confirmed through various tests including polarized light microscopy (PLM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The in-vitro cumulative release of NDNB-ASD in 2 h in a pH 6.8 medium was 8.3-fold higher than that of NDNB (p < 0.0001). In a pH 7.4 medium, it was 10 times higher (p < 0.0001). In the in-vivo pharmacokinetic experiments, the area under curve (AUC) of NDNB-ASD was 5.3-fold higher than that of NDNB and 2.2 times higher than that of commercially available soft capsules (Ofev®) (p < 0.0001). There was no recrystallization after 6 months under accelarated storage test. Our study indicated that NDNB-ASD can enhance the absorption of NDNB, thus providing a promising method to improve NDNB bioavailability in oral dosages.

In vivo deposition of poorly soluble drugs

Administered drug molecules, whether dissolved or solubilized, have the potential to precipitate and accumulate as solid forms in tissues and cells within the body. This phase transition can significantly impact the pharmacokinetics of treatment. It is thus crucial to gain an understanding of how drug solubility/permeability, drug formulations and routes of administration affect in vivo behaviors of drug deposition. This review examines literature reports on the drug deposition in tissues and cells of poorly water-soluble drugs, as well as underlying physical mechanisms that lead to precipitation. Our work particularly highlights drug deposition in macrophages and the subcellular fate of precipitated drugs. We also propose a tissue permeability-based classification framework to evaluate precipitation potentials of poorly soluble drugs in major organs and tissues. The impact on pharmacokinetics is further discussed and needs to be considered in developing drug delivery systems. Finally, bioimaging techniques that are used to examine aggregated states and the intracellular trafficking of absorbed drugs are summarized.

Advanced Delivery Strategies of Nintedanib for Lung Disorders and Beyond: A Comprehensive Review

Nintedanib, a primary treatment for lung fibrosis, has gathered substantial attention due to its multifaceted potential. A tyrosine kinase inhibitor, nintedanib, inhibits multiple signalling receptors, including endothelial growth factor receptor (VEGFR), platelet-derived growth factor receptor (PDGFR), and fibroblast growth factor receptor (FGFR) and ultimately inhibits fibroblast proliferation and differentiation. Therefore, nintedanib has been studied widely for other ailments like cancers and hepatic fibrosis, apart from lung disorders. Commercially, nintedanib is available as soft gelatin capsules for treatment against idiopathic pulmonary fibrosis. Since it has very low oral bioavailability (4.7%), high doses of a drug, such as 100-150 mg, are administered, which can cause problems of gastrointestinal irritation and hepatotoxicity. The article begins with exploring the mechanism of action of nintedanib, elucidating its complex interactions within cellular pathways that govern fibrotic processes. It also emphasizes the pharmacokinetics of nintedanib, clinical trial insights, and the limitations of conventional formulations. The article mainly focuses on the emerging landscape of nanoparticle-based carriers such as hybrid liposome-exosome, nano liquid crystals, discoidal polymeric, and magnetic systems, offering promising avenues to optimize drug targeting, address its efficacy issues and minimise adverse effects. However, none of these delivery systems are commercialised, and further research is required to ensure safety and effectiveness in clinical settings. Yet, as research progresses, these advanced delivery systems promise to revolutionise the treatment landscape for various fibrotic disorders and cancers, potentially improving patient outcomes and quality of life.

Enhanced bioavailability of curcumin amorphous nanocomposite prepared by a green process using modified starch

Curcumin (Cur), a bioactive compound extracted from plants, has attracted widespread attention due to its multiple pharmacological activities. However, the low bioavailability due to the inherent limitations in water solubility, chemical stability, and permeability poses great challenges for realizing its clinical potentials. In the current study, octenyl succinic anhydride-modified starch (OSA-S), a renewable and biodegradable biopolymer, was employed to fabricate Cur amorphous composite nanoparticles (Cur/OSA-S NPs) through a solvent-free pH-driven method with the aim to enhance Cur's bioavailability by improving its solubility and stability. Cur/OSA-S NPs, with mean sizes of about 128.9 ± 8.6 nm, encapsulation efficiencies of about 90.0 %, and the drug loading capacities around 51.0 ± 0.2 %, were successfully prepared. Cur was found to be dispersed within the composite nanoparticles in amorphous state as confirmed by the XRD and DSC characterizations. In addition, Cur/OSA-S NPs offers excellent storage, thermal and light stability, excellent re-dispersibility, and approximately 92 times better solubility than the original Cur. Furthermore, studies of dissolution and the parallel artificial membrane permeability assay (PAMPA) confirmed enhanced dissolution rates and in vitro permeabilities of Cur/OSA-S NPs. Cancer cell viability and uptake experiments revealed that Cur/OSA-S NPs possessed more potent inhibitory effects on cancer cell proliferation compared to the raw Cur. The results obtained from the current study demonstrated the effectiveness of OSA-S for manufacturing Cur amorphous composite nanoparticles with enhanced solubility, stability, and permeability, which might be valuable for further development of Cur based products for treatment of various diseases.

Revolutionizing the Treatment of Idiopathic Pulmonary Fibrosis: From Conventional Therapies to Advanced Drug Delivery Systems

Idiopathic pulmonary fibrosis (IPF) is a chronic and progressive interstitial lung disease that has been well-reported in the medical literature. Its incidence has risen, particularly in light of the recent COVID-19 pandemic. Conventionally, IPF is treated with antifibrotic drugs-pirfenidone and nintedanib-along with other drugs for symptomatic treatments, including corticosteroids, immunosuppressants, and bronchodilators based on individual requirements. Several drugs and biologicals such as fluorofenidone, thymoquinone, amikacin, paclitaxel nifuroxazide, STAT3, and siRNA have recently been evaluated for IPF treatment that reduces collagen formation and cell proliferation in the lung. There has been a great deal of research into various treatment options for pulmonary fibrosis using advanced delivery systems such as liposomal-based nanocarriers, chitosan nanoparticles, PLGA nanoparticles, solid lipid nanocarriers, and other nanoformulations such as metal nanoparticles, nanocrystals, cubosomes, magnetic nanospheres, and polymeric micelles. Several clinical trials are also ongoing for advanced IPF treatments. This article elaborates on the pathophysiology of IPF, its risk factors, and different advanced drug delivery systems for treating IPF. Although extensive preclinical data is available for these delivery systems, the clinical performance and scale-up studies would decide their commercial translation.

Recent developments in the use of nanocrystals to improve bioavailability of APIs

Nanocrystals refer to materials with at least one dimension smaller than 100 nm, composing of atoms arranged in single crystals or polycrystals. Nanocrystals have significant research value as they offer unique advantages over conventional pharmaceutical formulations, such as high bioavailability, enhanced targeting selectivity and controlled release ability and are therefore suitable for the delivery of a wide range of drugs such as insoluble drugs, antitumor drugs and genetic drugs with broad application prospects. In recent years, research on nanocrystals has been progressively refined and new products have been launched or entered the clinical phase of studies. However, issues such as safety and stability still stand that need to be addressed for further development of nanocrystal formulations, and significant gaps do exist in research in various fields in this pharmaceutical arena. This paper presents a systematic overview of the advanced development of nanocrystals, ranging from the preparation approaches of nanocrystals with which the bioavailability of poorly water-soluble drugs is improved, critical properties of nanocrystals and associated characterization techniques, the recent development of nanocrystals with different administration routes, the advantages and associated limitations of nanocrystal formulations, the mechanisms of physical instability, and the enhanced dissolution performance, to the future perspectives, with a final view to shed more light on the future development of nanocrystals as a means of optimizing the bioavailability of drug candidates. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Nintedanib solid lipid nanoparticles improve oral bioavailability and ameliorate pulmonary fibrosis in vitro and in vivo models

Nintedanib (NIN) and pirfenidone are the only approved drugs for the treatment of Idiopathic Pulmonary Fibrosis (IPF). However, NIN and pirfenidone have low oral bioavailability and limited therapeutic potential, requiring higher dosages to increase their efficacy, which causes significant liver and gastrointestinal toxicities. In this study, we aimed to develop nintedanib-loaded solid lipid nanoparticles (NIN-SLN) to improve the oral bioavailability and therapeutic potential against TGF-β-induced differentiation in IPF fibroblasts and bleomycin (BLM)-induced lung fibrosis in rat models. NIN-SLN was prepared using a double-emulsification method and characterization studies (Particle size, zeta potential, entrapment efficiency and other parameters) were performed using various techniques. NIN-SLN treatment significantly (p < 0.001) downregulated α-SMA and COL3A1 expression in TGF-β stimulated DHLF and LL29 cells. NIN-SLN showed a 2.87-fold increase in the bioavailability of NIN and also improved the NIN levels in lung tissues compared to NIN alone. Pharmacodynamic investigation revealed that NIN-SLN (50 mg/Kg) treatment significantly attenuated BLM-induced lung fibrosis by inhibiting epithelial-to-mesenchymal-transition (EMT), extracellular matrix remodelling, and collagen deposition compared to free NIN. Additionally, in the BLM model of fibrosis, NIN-SLN greatly improved the BLM-caused pathological changes, attenuated the NIN-induced gastrointestinal abnormalities, and significantly improved the lung functional indices compared to free NIN. Collectively, NIN-SLN could be a promising nanoformulation for the management of pulmonary fibrosis.

Long-circulating thiolated chitosan nanoparticles of nintedanib with N-acetyl cysteine for treating idiopathic pulmonary fibrosis: In vitro assessment of cytotoxicity, antioxidant, and antifibrotic potential

Nintedanib (NIN) is one of the FDA-approved tyrosine kinase inhibitor drugs used to treat idiopathic pulmonary fibrosis (IPF). This study aimed to formulate a long-circulating injection of Nintedanib to treat bedridden patients with IPF. Nintedanib was incorporated into chitosan nanoparticles (NIN-NP) via the ionic gelation method, and N-acetyl cysteine (NAC), a known antioxidant and mucolytic agent, was added to the NIN-NP (NAC-NIN-NP). The lyophilized formulation had a particle size of 174 nm, a polydispersity index of 0.511, and a zeta potential of 18.6 mV. The spherical nanoparticles were observed in transmission electron microscopy, whereas field emission scanning electron microscopy showed irregular clusters of NP. The thiolation of the chitosan in NAC-NIN-NP was confirmed by ATR-FTIR and NMR, which improved drug release profiles showing >90 % drug release that was 2.42-folds greater than NIN-NP lasting for five days. The DPPH assay showed that adding NAC increased the % inhibition of oxidation in blank-NP (from 54.59 % to 87.17 %) and NIN-NP (58.65 %-89.19 %). The MTT assay on A549 cells showed 67.57 % cell viability by NAC-NIN-NP with an IC50 value of 28 μg/mL. The NAC formulation reduced hydroxyproline content (56.77 μg/mL) compared to NIN-NP (69.48 μg/mL) in WI-38 cell lines. Meanwhile, the healthy cells count with NAC-NIN-NP was higher (5.104 × 103) than with NIN-NP (4.878 × 103). In Hoechst staining, no significant damage to DNA was observed by the drug or formulation. Therefore, NAC-NIN-NP could be a promising treatment option for IPF patients and can be studied further clinically.

pH-triggered "PEG" sheddable and folic acid-targeted nanoparticles for docetaxel delivery in breast cancer treatment

Multifunctional nanoparticles have attracted significant attentions for oncology and cancer treatment. In fact, they could address critical point for tumour treatment by creating a stimuli-responsive targeted drug delivery system that can exist stably in the systemic circulation, efficiently penetrate the tumour tissue, and then accumulate in tumour cells in large quantities. A novel stepwise pH-responsive multifunctional nanoparticles (FPDPCNPs/DTX) for targeted delivery of the antitumour drug docetaxel (DTX) is prepared by coating a tumour acidity-sensitive "sheddable" FA modified β-carboxylic amide functionalized PEG layer (folic acid-polyethylene glycol-2,3-dimethylmaleic anhydride, FA-PEG-DA) on the cationic drug-loaded core (poly(β-amino ester-cholesterol, PAE-Chol) through electrostatic interaction in this study. The charge shielding behaviour of the FPDPCNPs/DTX was confirmed by zeta potential assay. The surface charges of the nanoparticles can change from positive to negative after PEG coating. The IC50 values of FPDPCNPs/DTX was 3.04 times higher than that of PEG "unsheddable" nanoparticles in cytotoxicity experiments. The results of in vivo experiment further showed that FPDPCNPs/DTX had enhanced tumour targeting effect, the tumour inhibition rate of FPDPCNPs/DTX was as high as 81.99%, which was 1.51 times that of free DTX. Under a micro acidic environment and folate receptor (FR)-mediated targeting, FPDPCNPs/DTX contributed to more uptake of DTX by MCF-7 cells. In summary, FPDPCNPs/DTX as a multifunctional nano-drug delivery system provides a promising strategy for efficiently delivering antitumour drugs.

Recent advances of nanocrystals in cancer theranostics

Emerging cancer cases across the globe and treating them with conventional therapies with multiple limitations have been challenging for decades. Novel drug delivery systems and alternative theranostics are required for efficient detection and treatment. Nanocrystals (NCs) have been established as a significant cancer diagnosis and therapeutic tool due to their ability to deliver poorly water-soluble drugs with sustained release, low toxicity, and flexibility in the route of administration, long-term sustainable drug release, and noncomplicated excretion. This review summarizes several therapies of NCs, including anticancer, immunotherapy, radiotherapy, biotheranostics, targeted therapy, photothermal, and photodynamic. Further, different imaging and diagnostics using NCs are mentioned, including imaging, diagnosis through magnetic resonance imaging (MRI), computed tomography (CT), biosensing, and luminescence. In addition, the limitations and potential solutions of NCs in the field of cancer theranostics are discussed. Preclinical and clinical data depicting the importance of NCs in the spotlight of cancer, its current status, future aspects, and challenges are covered in detail.

Factors affecting the preparation of nanocrystals: characterization, surface modifications and toxicity aspects

INTRODUCTION

The fabrication of well-defined nanocrystals in size and form is the focus of much investigation. In this work, we have critically reviewed several recent instances from the literature that shows how the production procedure affects the physicochemical properties of the nanocrystals.

AREAS COVERED

Scopus, MedLine, PubMed, Web of Science, and Google Scholar were searched for peer-review articles published in the past few years using different key words. Authors chose relevant publications from their files for this review. This review focuses on the range of techniques available for producing nanocrystals. We draw attention to several recent instances demonstrating the impact of various process and formulation variables that affect the nanocrystals' physicochemical properties. Moreover, various developments in the characterization techniques explored for nanocrystals concerning their size, morphology, etc. have been discussed. Last but not least, recent applications, the effect of surface modifications, and the toxicological traits of nanocrystals have also been reviewed.

EXPERT OPINION

The selection of an appropriate production method for the formation of nanocrystals, together with a deep understanding of the relationship between the drug's physicochemical properties, unique features of the various formulation alternatives, and anticipated in-vivo performance, would significantly reduce the risk of failure during human clinical trials that are inadequate.

Comparison of in vivo behaviors of intramuscularly long-acting celecoxib nanosuspensions with different particle sizes for the postoperative pain treatment

Celecoxib (CXB) has a good analgesic effect on postoperative acute pain, but clinically its compliance is compromised because of frequent administration. Therefore, the development of injectable celecoxib nanosuspensions (CXB-NS) for long-acting analgesic effects is highly desirable. However, how the particle size affects the in vivo behaviors of CXB-NS remains unclear. Herein, CXB-NS with different sizes were prepared by the wet-milling method. Following intramuscular (i.m.) injection in rats (50 mg/kg), all CXB-NS achieved sustained systemic exposure and long-acting analgesic effects. More importantly, CXB-NS showed size-dependent pharmacokinetic profiles and analgesic effects, and the smallest CXB-NS (about 0.5 μm) had the highest C_max, T_1/2, and AUC_0-240h and the strongest analgesic effects on incision pain. Therefore, small sizes are preferred for long action by i.m. injection, and the CXB-NS developed in this study were alternative formulations for the treatment of postoperative acute pain.

Preparation and optimization of surface stabilized cryptotanshinone nanocrystals with enhanced bioavailability

Cryptotanshinone (CTS) is a plant product extracted from Salvia miltiorrhiza Bunge with various pharmacological significances. In addition to its activities against coronary heart disease, hyperlipidemia, stroke, hepatitis and chronic renal failure, it demonstrates antimetastatic effects. However, its clinical use is limited due to its poor aqueous solubility and oral bioavailability. Herein, CTS nanocrystals were prepared with the precipitation method followed by high-pressure homogenization using Poloxamer 407 as the stabilizer. A stable product was further obtained by lyophilization. The particle size of the CTS nanocrystals was 315.67 ± 11.02 nm, and the zeta potential was near 0 mV. The crystallinity was confirmed by DSC and PXRD. The saturation solubility was substantially increased from 0.97 ± 0.12 μg/ml to 62.29 ± 1.91 μg/ml, and the dissolution rate was also significantly accelerated. A pharmacokinetic study in rats revealed an improvement in oral bioavailability (2.87-fold) with CTS nanocrystals compared to the raw drug. In conclusion, the results of this study suggest a feasible formulation for the oral delivery of CTS.

Liquid antisolvent crystallization of pharmaceutical compounds: current status and future perspectives

The present work reviews the liquid antisolvent crystallization (LASC) to prepare the nanoparticle of pharmaceutical compounds to enhance their solubility, dissolution rate, and bioavailability. The application of ultrasound and additives is discussed to prepare the particles with narrow size distribution. The use of ionic liquid as an alternative to conventional organic solvent is presented. Herbal compounds, also known for low aqueous solubility and limited clinical application, have been crystalized by LASC and discussed here. The particle characteristics such as particle size and particle size distribution are interpreted in terms of supersaturation, nucleation, and growth phenomena. To overcome the disadvantage of batch crystallization, the scientific literature on continuous flow reactors is also reviewed. LASC in a microfluidic device is emerging as a promising technique. The different design of the microfluidic device and their application in LASC are discussed. The combination of the LASC technique with traditional techniques such as high-pressure homogenization and spray drying is presented. A comparison of product characteristics prepared by LASC and the supercritical CO₂ antisolvent method is discussed to show that LASC is an attractive and inexpensive alternative for nanoparticle preparation. One of the major strengths of this paper is a discussion on less-explored applications of LASC in pharmaceutical research to attract the attention of future researchers.

Pharmaceutical Methods for Enhancing the Dissolution of Poorly Water-Soluble Drugs

Low water solubility is the main hindrance in the growth of pharmaceutical industry. Approximately 90% of newer molecules under investigation for drugs and 40% of novel drugs have been reported to have low water solubility. The key and thought-provoking task for the formulation scientists is the development of novel techniques to overcome the solubility-related issues of these drugs. The main intention of present review is to depict the conventional and novel strategies to overcome the solubility-related problems of Biopharmaceutical Classification System Class-II drugs. More than 100 articles published in the last 5 years were reviewed to have a look at the strategies used for solubility enhancement. pH modification, salt forms, amorphous forms, surfactant solubilization, cosolvency, solid dispersions, inclusion complexation, polymeric micelles, crystals, size reduction, nanonization, proliposomes, liposomes, solid lipid nanoparticles, microemulsions, and self-emulsifying drug delivery systems are the various techniques to yield better bioavailability of poorly soluble drugs. The selection of solubility enhancement technique is based on the dosage form and physiochemical characteristics of drug molecules.

Nanocrystallization Improves the Solubilization and Cytotoxic Effect of a Poly (ADP-Ribose)-Polymerase-I Inhibitor

Olaparib (OLA) is an anticancer agent that acts by inhibiting the poly (ADP-ribose)-polymerase-I (PARP-I). Due to its low solubility and low permeability, it has been placed as a BCS Class-IV drug and hence its clinical use is limited. In this study, we develop the nanocrystals of OLA as a way to improve its solubility and other performances. The OLA-NCs were prepared by antisolvent precipitation method through homogenization and probe sonication technique using a novel amphiphilic polymeric stabilizer (Soluplus®). Particle characterization resulted approximately 103.13 nm, polydispersity-index was 0.104 with positive zeta-potential of +8.67 mV. The crystal morphology by SEM of OLA-NCs (with and without mannitol) exhibited nano-crystalline prism-like structures as compared to the elongated OLA-pure. The DSC, XRD and FTIR were performed to check the interaction of Soluplus, mannitol and OLA did not exhibit any physical interaction among the OLA, Soluplus® and mannitol that is indicated by the presence of parent wave number peak. Two-fold increased solubility of OLA was found in PBS with Soluplus® from the NCs (69.3 ± 6.2 µgmL−1) as compared to pure drug (35.6 ± 7.2 µgmL−1). In vitro release of drug from OLA-NCs was higher (78.2%) at 12 h at pH 6.8 and relatively lower (53.1%) at pH 1.2. In vitro cellular cytotoxicity and anticancer effects were examined on MCF-7 cells. OLA-NCs were found effectively potent to MCF-7 cells compared with OLA-pure with approximately less than half IC50 value during MTT assay. Estimation of p53, Caspase-3 and Caspase-9 in MCF-7 cells indicated that OLA-NCs have significantly (p < 0.05) increased their expressions. After single oral dose in rats, 12 h plasma drug concentration-time profile indicated approximately 2.06-, 2.29-, 2−25- and 2.62-folds increased Cmax, AUC0-12 h, AUC0-∞ and AUMC0-∞, respectively, from the NCs as compared to OLA-pure. Storage stability indicated that the OLA-NCs was physically and chemically stable at 4 °C, 25 °C and 40 °C up to 6-months. Overall, OLA-NCs were deliberated; its potential feasibility to overwhelm the formulation challenges related to poorly soluble drugs and its future clinical applications.

Bioavailability enhancement of vitamin E TPGS liposomes of nintedanib esylate: formulation optimization, cytotoxicity and pharmacokinetic studies

Nintedanib esylate is a kinase inhibitor designated for the cure of non-small cell lung cancer suffered from first-pass metabolism which resulted in low oral bioavailability (~ 4.7%). The exploration intended to increase the oral bioavailability of drug by means of D-alpha-tocopheryl polyethylene glycol 1000 succinate (TPGS) liposomes. The nintedanib esylate-loaded TPGS liposomes were prepared by thin-film hydration method by optimizing process parameters like phospholipids:cholesterol ratio, drug loading and sonication time through the design of experiments. The drug's behaviour was studied using a variety of techniques, including physicochemical characterization and in vitro and in vivo studies. TPGS liposomes had a particle size of 125 ± 6.7 nm, entrapment efficiency of 88.6 ± 4.1% and zeta potential of + 46 ± 2.8 mV. X-ray diffraction analysis revealed the drug was converted to partially amorphous state, while transmission electron microscope images showed the spherical shape with TPGS on the surface of liposomes. The formulation showed Higuchi kinetics with sustained drug release of 92% in 36 h. Cellular uptake of C-6-labelled liposomes was observed in A-549 cells and cytotoxicity testing revealed that liposomes were more effective than marketed formulation. The preparation was found stable in stability chamber and simulated fluids. Liposomal oral bioavailability was ~ 6.23 times greater in Sprague-Dawley male rats compared to marketed formulation, according to in vivo pharmacokinetic data. Liposomes performed better than marketed capsules upon oral administration because of the prolonged drug release and increased oral bioavailability; as a result, the developed formulation can become a successful strategy in cancer chemotherapy.

Synergies in antimicrobial treatment by a levofloxacin-loaded halloysite and gold nanoparticles with a conjugation to a cell-penetrating peptide

Herein, a novel designed antimicrobial therapeutic drug delivery system is presented, in which halloysite nanotubes (HNTs) encapsulate a determined dosage of levofloxacin (lvx). Moreover, gold nanoparticles (AuNPs) have been embedded into the structure for plasmonic heating under irradiation of the green LED light (7 W, 526 nm). It was revealed that the plasmonic heating of the AuNPs leads to a controlled trend in the lvx release process. Also, a synergistic effect on the antimicrobial activity of the prepared therapeutic system has been observed through photothermal heating of the structure. To enhance the cell adhesion, a cell-penetrating peptide sequence (CPP) is conjugated to the surfaces. This CPP has led to quick co-localization of the prepared nano-cargo (denoted as lvx@HNT/Au-CPP) with the bacterial living cells and further attachment (confirmed by confocal microscopy). Concisely, the structure of the designed nano-cargo has been investigated by various methods, and the in vitro cellular experiments (zone of inhibition and colony-counting) have disclosed that the antimicrobial activity of the lvx is significantly enhanced through incorporation into the HNT/Au-CPP delivery system (drug content: 16 wt%), in comparison with the individual lvx with the same dosage. Hence, it can be stated that the bacterial resistance against antibiotics and the toxic effects of the chemical medications are reduced through the application of the presented strategy.

Enteric Polymer-Based Amorphous Solid Dispersions Enhance Oral Absorption of the Weakly Basic Drug Nintedanib via Stabilization of Supersaturation

The pH−induced crystallization of weakly basic drugs in the small intestine limits oral bioavailability. In this study, we investigated the solubilization and inhibitory effects on nintedanib in the presence of enteric polymers (HPMCAS LG, HPMCAS MG, Eudragit L100 55, and Eudragit L100). These polymers provided maintenance of supersaturation by increasing the solubility of nintedanib in PBS 6.8 in a concentration-dependent manner, and the improved ranking was as follows: Eudragit L100 > Eudragit L100 55 > HPMCAS MG > HPMCAS LG. After being formulated into amorphous solid dispersions (ASDs) by a solvent evaporation method, the drug exhibited an amorphous state. The pH shift dissolution results of polymer-ASDs demonstrated that four polymers could effectively maintain the drug supersaturation even at the lowest ratio of nintedanib and polymer (1:1, w/w). Eudragit L100−ASD could provide both acid resistance and the favorable mitigation of crystallization in GIF. In comparison to the coarse drug, the relative bioavailability of Eudragit L100−ASD was 245% after oral administration in rats, and Tmax was markedly delayed from 2.8 ± 0.4 h to 5.3 ± 2.7 h. Our findings indicate that enteric ASDs are an effective strategy to increase the intestinal absorption of nintedanib by improving physiologically generated supersaturation and subsequent crystallization.

Silymarin nanocrystals-laden chondroitin sulphate-based thermoreversible hydrogels; A promising approach for bioavailability enhancement

Hydrogels has gained tremendous interest as a controlled release drug delivery. However, currently it is a big challenge to attain high drug-loading as well as stable and sustained release of hydrophobic drugs. The poor aqueous solubility and low bioavailability of many drugs have driven the need for research in new formulations. This manuscript hypothesized that incorporation of nanocrystals of hydrophobic drug, such as silymarin into thermoreversible hydrogel could be a solution to these problems. Herein, we prepared nanocrystals of silymarin by antisolvent precipitation technique and characterized for morphology, particle size, polydispersity index (PDI) and zeta potential. Moreover, physical cross-linking of hydrogel formulations based on chondroitin sulphate (CS), kappa-Carrageenan (κ-Cr) and Pluronic® F127 was confirmed by Fourier transformed infrared spectroscopy (FT-IR). The hydrogel gelation time and temperature of optimized hydrogel was 14 ± 3.2 s and 34 ± 0.6 °C, respectively. The release data revealed controlled release of silymarin up to 48 h and in-vivo pharmacokinetic profiling was done in rabbits and further analyzed by high-performance liquid chromatography (HPLC). It is believed that the nanocrystals loaded thermoreversible injectable hydrogel system fabricated in this study provides high drug loading as well as controlled and stable release of hydrophobic drug for extended period.

Design of an L-Valine-Modified Nanomicelle-Based Drug Delivery System for Overcoming Ocular Surface Barriers

The incidence of ocular surface disease (OSD) is increasing, with a trend towards younger ages. However, it is difficult for drugs to reach the deep layers of the cornea due to ocular surface barriers, and bioavailability is less than 5%. In this study, DSPE-PEG2000 was modified with L-valine (L-Val), and an HS15/DSPE-PEG2000-L-Val nanomicelle delivery system containing baicalin (BC) (BC@HS15/DSPE-PEG2000-L-Val) was constructed using thin-film hydration, with a high encapsulation rate, small particle size and no irritation to the ocular surface. Retention experiments on the ocular surface of rabbits and an in vivo corneal permeation test showed that, compared with the control, nanomicelles not only prolonged retention time but also enhanced the ability to deliver drugs to the deep layers of the cornea. The results of a protein inhibition and protein expression assay showed that nanomicelles could increase uptake in human corneal epithelial cells (HCEC) through energy-dependent endocytosis mediated by clathrin, caveolin and the carrier pathway mediated by PepT1 by inhibiting the overexpression of claudin-1 and ZO-1 and suppressing the expression of PepT1-induced by drug stimulation. These results indicate that BC@HS15/DSPE-PEG2000-L-Val is suitable for drug delivery to the deep layers of the ocular surface, providing a potential approach for the development of ocular drug delivery systems.

Cationically modified inhalable nintedanib niosomes: enhancing therapeutic activity against non-small-cell lung cancer

Aim: This study was designed to develop and test nintedanib-loaded niosomes as inhalable carriers for enhancing its therapeutic efficacy via localized drug accumulation and addressing issues such as low bioavailability and severe toxicity. Methods: Niosomes were prepared by thin-film hydration method and were evaluated for in vitro therapeutic effectiveness in lung cancer cells. Results: The optimized niosomal formulation displayed optimized vesicle size, controlled and extended release of drug, and efficient aerodynamic properties indicating its suitability as an aerosolized formulation. In vitro studies revealed significantly superior cytotoxicity of nintedanib-loaded niosomes which was further validated by 3D spheroids. Conclusion: These findings establish the effectiveness of niosomes as inhalable delivery carriers which could serve as a promising strategy for delivery of nintedanib to treat several lung cancers.

Development and Characterization of a Spray-Dried Inhalable Ciprofloxacin-Quercetin Co-Amorphous System

Spray drying is an increasingly used particle engineering technique for the production of dry powders for inhalation. However, the amorphous nature of most spray-dried particles remains a big challenge affecting both the chemical and the physical stability of the dried particles. Here, we study the possibility of producing co-amorphous ciprofloxacin-quercetin inhalable particles with improved amorphous stability compared to the individual amorphous drugs. Ciprofloxacin (CIP), a broad-spectrum antibiotic, was co-spray dried with quercetin (QUE), a compound with antibiofilm properties, from an ethanol-water co-solvent system at 2:1, 1:1 and 1:2 molar ratios to investigate the formation of co-amorphous CIP-QUE particles. Differential scanning colorimetry (DSC) and X-ray powder diffraction (XRPD) were used for solid-state characterization; dynamic vapor sorption (DVS) was used for investigating the moisture sorption behaviour. The intermolecular interaction was studied via solution-state nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopy; the miscibility of the drugs was predicted via free energy calculations based on the Flory-Huggins interaction parameter (χ). A next generation impactor (NGI) was used to study the in vitro aerosol performance of the spray-dried powders. The physicochemical characteristics such as particle size, density, morphology, cohesion, water content and saturation solubility of the spray-dried powders were also studied. The co-spray-dried CIP-QUE powders prepared at the three molar ratios were predominantly amorphous. However, differences were observed between sample types. It was found that at a molar ratio of 1:1, CIP and QUE form a single co-amorphous system. However, increasing the molar ratio of either drug results in the formation of an additional amorphous phase, formed from the excess of the corresponding drug. Despite these differences, DVS showed that elevated humidity had a much lower influence on all three co-amorphous systems compared with the individual amorphous drugs. In vitro aerosolization study showed co-deposition of the two drugs from CIP-QUE powders with a desirable aerosol performance (ED ∼ 72% - 94%; FPF ∼ 48% - 65%) whereas QUE-only amorphous powder had an ED of 36% and a FPF of 22%. In summary, spray-dried CIP-QUE combinations resulted in co-amorphous systems with boosted stability and improved aerosol performance with the 1:1 molar ratio exhibiting the greatest improvement.

Preparation and Study of Folate Modified Albumin Targeting Microspheres

In this study, folate modified bovine serum albumin was successfully synthesized, while preparation of Nintedanib albumin microspheres (ND-FSA NPs) as a carrier was carried out via electrospinning technology. Folate modified albumin was used to enhance the targeting potential of the prepared microspheres. The prepared microspheres had spherical appearance and smooth outer surface. The diameters of microspheres (764.68 ± 88.46 nm) and zeta potential (- 18.38 ± 0.41 mV) were acceptable. The prepared ND-FSA NPs demonstrated a good degree of modification, wherein the modification rate was 28.1%. In vitro release was significantly increased in three different media (double deionized water-DDW, HCl-pH 1.2, and phosphate buffered solution containing 0.5% Tween 80). It is worth noting that incorporation of Nintedanib into folic acid modified albumin microspheres resulted in an enhanced uptake of the drug into MCF-7 breast cancer cells coupled with higher inhibition rate. Altogether, incorporation of Nintedanib into folate modified albumin microspheres is a new approach to improve water solubility and targeting effect of the drug.