Active basal plane catalytic activity and conductivity in Zn doped MoS2 nanosheets for efficient hydrogen evolution

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Boosting Highly Active Exposed Mo Atoms by Fine-Tuning S-Vacancies of MoS2-Based Materials for Efficient Hydrogen Evolution

Guided by the theoretical calculation, achieving an efficient hydrogen evolution reaction (HER) by S-vacancy engineering toward MoS₂-based materials is quite challenging due to the contradictory relationship between the adsorption free energy of hydrogen atoms (ΔG_H) of the exposed Mo atoms (EMAs) and the number of EMAs per unit area (N_EMAs). Herein, we demonstrate a novel one-pot incorporating-assisted compositing strategy to realize fine-tuning the concentration of S-vacancies (C_S-vacancies) of MoS₂-based materials to boost highly active EMAs for efficient HER. In our strategy, S-vacancies are modulated into basal planes of MoS₂ via decreasing the formation energy of S-vacancies by oxygen incorporation; moreover, C_S-vacancies of the basal planes is precisely regulated by simply controlling the molar amount of the Co precursor based on the electron injection effect. At low or excessively high C_S-vacancies, the as-synthesized electrocatalysts lack "highly active EMAs" in quantity or nature. The balance between the intrinsic activity of EMAs and N_EMAs is realized for boosting EMAs with high catalytic performance. The optimal electrocatalysts exhibit excellent activity and stability at fine-tuning C_S-vacancies to 9.61%. Our results will pave a novel strategy for unlocking the potential of an inert basal plane in MoS₂ for high-performance HER.

The enhanced photocatalytic sterilization of MOF-Based nanohybrid for rapid and portable therapy of bacteria-infected open wounds

Open wounds are prone to infection and difficult to heal, which even threatens the life of patients because bacterial infections can induce other lethal complications without prompt treatment. The commonly used antibiotics treatment for bacterial infections has been reported to cause globally bacterial resistance and even the occurrence of superbacteria. The highly effective and antibiotic-independent therapeutic strategies are urgently needed for treating various kinds of bacteria-infected diseases. In this work, we synthesized an eco-friendly nanohybrid material (ZnDMZ) consisting of a kind of biodegradable metal organic framework (MOF, ZIF-8) combined with Zn-doped MoS₂ (Zn–MoS₂) nanosheets, which exhibited great ability to kill bacteria and promote the healing of bacteria-infected wounds under 660 nm light irradiation. The underlying mechanism is that besides the local hyperthermia, the nanohybrid material exhibits enhanced photocatalytic performance than single component in it, i.e., it can also be excited by 660 nm light to produce more oxygen radical species (ROS) due to the following factors. On one hand, the Zn doping can reduce the work function and the band gap of MoS₂, which promotes the movement of photoexcited electrons to the surface of the material. On the other hand, the combination between Zn–MoS₂ and MOF induces the formation of a built-in electric field due to their work function difference, thus accelerating the separation of photoexcited electron-hole pairs. Because of the synergy of photocatalytic effect, photothermal effect and the released Zn ions, the synthesized ZnDMZ possessed a highly effective antibacterial efficacy of 99.9% against Staphylococcus aureus under 660 nm light irradiation for 20 min without cytotoxicity. In vivo tests showed that this nanohybrid material promoted the wound healing due to the released Zn ions. This nanohybrid will be promising for rapid and portable treatment of bacteria-infected open wounds in pathogenic bacteria contaminated environments.

•

MOF-based hybrid can promote the healing of bacteria-infected wounds with excellent biosafety.

•

Zn doping induced the reduction of work function and band gap of MoS₂.

•

Formation of a built-in electric field at the interface can accelerate the separation of carries at the interface.

•

MOF-based hybrids can effectively adsorb oxygen and produce more ROS.

Tailoring S-vacancy concentration changes the type of the defect and photocatalytic activity in ZFS

Defect engineering is crucial in the development of semiconductor catalyst activity. However, the influence of defect/vacancy density and states on catalysis remains vague. Thus, the optimized sulfur vacancy (S_V) state is achieved among Fe-ZnS models (ZFS) via a chemical etching strategy for photocatalytic degradation (PD). As the S_V concentration (ρS_V) increases, the predominant state of vacancies changes from isolated defects－a state to a combination of a state and vacancy clusters－e state, as verified by positron annihilation and X-ray absorption fine structure spectra. However, the two types of defect states activated the intrinsic activity of the crystal via radically different mechanisms and exerted different degrees of influence on PD activity, as revealed by first-principles calculations and quantitative structure-activity relationship. Our results suggest that the S_V activity is strongly influenced by its concentration in the ZFS crystal, while the vacancy concentration is not a control parameter for the PD activity, but a defect form. The underlying essence of atomic defects behavior affecting crystal catalytic activity at the atomic level is also revealed in this paper. Uncovering these structural relationships provide a theoretical basis for designing effective catalysts.

Emerging Single-Atom Catalysts/Nanozymes for Catalytic Biomedical Applications

Single-atom catalysts (SACs) are a type of atomically dispersed nanozymes with the highest atom utilization, which employ low-coordinated single atoms as the catalytically active sites. SACs not only inherit the merits of traditional nanozymes, but also hold high catalytic activity and superb catalytic selectivity, which ensure their tremendous application potential in environmental remediation, energy storage and conversion, chemical industry, nanomedicine, etc. Nevertheless, undesired aggregation effect of single atoms during preactivation and reaction processes is significantly enhanced owing to the high surface free energy of single atoms. In this case, appropriate substrates are requisite to prevent the aggregation event through the powerful interactions between the single atoms and the substrates, thereby stabilizing the high catalytic activity of the catalysts. In this review, the synthetic methods and characterization approaches of SACs are first described. Then the application cases of SACs in nanomedicine are summarized. Finally, the current challenges and future opportunities of the SACs in nanomedicine are outlined. It is hoped that this review may have implications for furthering the development of new SACs with improved biophysicochemical properties and broadened biomedical applications.

N, P co-doping triggered phase transition of MoS2 with enlarged interlayer spacing for efficient hydrogen evolution

Molybdenum disulfide (MoS2)-based transition-metal chalcogenides are considered to be cost-efficient, environmentally-friendly, and stable materials in the application of electrocatalytic hydrogen production.

Chemically Activating Tungsten Disulfide via Structural and Electronic Engineering Strategy for Upgrading the Hydrogen Evolution Reaction

Both improving the intrinsic activity and activating basal plane sites of the layered metal dichalcogenides are desirable to enhance their electrocatalytic performance for energy storage and conversion. Herein, we present palladium (Pd)-doped tungsten disulfide (WS₂) epitaxially sheathed around linear tungsten oxide for the hydrogen evolution reaction (HER). The Pd doping is evidenced to tune the electronic structure of WS₂ for activating basal sites of WS₂, while the unique core-shell structure facilitates charge transfer. The as-prepared Pd-WS₂/W₃O with 5.65 wt % Pd content exhibits a small overpotential of only 54 mV at -10 mA cm^-2 and superior stability in the acidic electrolyte, which are superior to that of the 5 wt % Pt/C benchmark and are unprecedented in the reported WS₂-based electrocatalysts. Theoretical results have revealed that Pd substituting for W in coordination with four S atoms is thermodynamically stable, and the in-plane S atoms adjacent to the doped Pd represent new catalytic active centers for promoting hydrogen adsorption. This work provides a new multiscale structural and electronic engineering strategy for improving the catalytic performance of transition-metal dichalcogenides.

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂ ) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂ . In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂ . It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm^-2 ) and a low Tafel slope of 58 mV dec^-1 . The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.

Activating the Basal Plane of 2H-MoS2 by Doping Phosphor for Enhancement in the Photocatalytic Degradation of Organic Contaminants

The 2H phases of MoS₂ (2H-MoS₂) monolayers present a wealth of new opportunities in photocatalysis owing to their photoinduced catalyzing ability and excellent charge carrier mobility. However, the complete release of their catalytic activities is restricted by their inert basal planes. Although the inert base planes of 2H-MoS₂ are known to be activated by atomic doping, the operational principle of the exotic atoms remains vague. In this study, the unutilized inert base sites of MoS₂ were activated via an oxygen-aided P-substituted method (denoted as POMS). Molecular structural tests and analyses of POMS indicated that the inert MoS₂ substrate is activated when the inerratic crystal phases transform to amorphous phases in the P-doping process. The fully activated inert base planes provide sufficient reaction sites for photo-oxidized water contaminants. The designed POMS presented superior activity in organic degradation and completely removed sulfamethoxazole within 20 min. Uncovering these operational principles provides a theoretical basis for designing effective catalysts.

Synergistic zinc doping and defect engineering toward MoS2 nanosheet arrays for highly efficient electrocatalytic hydrogen evolution

Herein, we have demonstrated synergistic zinc doping and defect engineering toward MoS₂ nanosheet arrays assembled on carbon cloth (CC) by a one-pot hydrothermal approach for the first time, which are employed directly as a cathode for the hydrogen evolution reaction (HER). In our strategy, simultaneously doping sufficient Zn atoms and introducing a defect-rich structure into a MoS₂ nanosheet can synergistically increase active sites. Additionally, the assembly of such nanosheets on CC can achieve lower charge-transfer resistance for the highly efficient HER.

A ternary hybrid of Zn-doped MoS2-RGO for highly effective electrocatalytic hydrogen evolution

Modification of MoS₂-based catalysts is effective in solving the overdependence of hydrogen evolution reactions (HERs) on noble metal catalysts. In this work, a Zn-doped molybdenum disulfide-reduced graphene oxide (Zn-MoS₂-RGO) hybrid was synthesized in one step employing a hydrothermal method. By substituting the position of Mo, uniform doping with Zn improved the catalytic activity of MoS₂ for HER. The interlayer spacing of MoS₂ increased from 0.65 to 0.75 nm, demonstrating RGO effectively interpolate into MoS₂ nanosheets. This prevented aggregation and exposed more edge active sites of MoS₂. According to density functional theory (DFT) calculations, the layered structure of the MoS₂ nanosheets doped with Zn and intercalated with RGO promoted charge transfer and resulted in outstanding hydrogen evolution activity. Compared with MoS₂ (6.86 eV), the Zn-MoS₂-RGO hybrid (5.47 eV) with a considerably lower energy level value exhibited excellent electrocatalytic performance. Under optimal conditions, at a potential of -0.3 V vs. RHE, the current density reached -169 mA cm^-2 in a 0.5 M H₂SO₄ solution, 4.78 μmol of H₂ was produced in 6 h, and the Faraday efficiency reached 92%. The results obtained herein indicated that Zn-MoS₂-RGO was a promising candidate for application in electrocatalytic HER.

Active Basal Plane Catalytic Activity via Interfacial Engineering for a Finely Tunable Conducting Polymer/MoS2 Hydrogen Evolution Reaction Multilayer Structure

The fixation of the catalyst interface is an important consideration for the design of practical applications. However, the electronic structure of MoS₂ is sensitive to its embedding environment, and the catalytic performance of MoS₂ catalysts may be altered significantly by the type of binding agents and interfacial structure. Interfacial engineering is an effective method for designing efficient catalysts, arising from the close contact between different components, which facilitates charge transfer and strong electronic interactions. Here, we have developed a layer-by-layer (LbL) strategy for the preparation of interfacial MoS₂-based catalyst structures with two types of conducting polymers on various substrates. We demonstrate how the assembled partners in the LbL structure can significantly impact the electronic structures in MoS₂. As the number of bilayers grows, using polypyrrole as a binder remarkably increases the catalytic efficacy as compared to using polyaniline. On the one hand, the ratio of S₂^2- (or S^2-), which is related to the remaining active hydrogen evolution reaction (HER) species, is further increased. On the other hand, density functional theory calculations indicate that the interfacial charge transport from the conducting polymers to MoS₂ may boost the HER activity of the interfacial structure of the conducting polymer/MoS₂ by decreasing the adsorption free energy of the intermediate H* at the S sites in the basal plane of MoS₂. The optimized catalytic efficacy of the (conducting polymer/MoS₂)_n assembly peaks is obtained with 16 assembly cycles. In preparing interfacial catalytic structures, the LbL-based strategy exhibits several key advantages, including the flexibility of choosing assembly partners, the ability to fine-tune the structures with precision at the nanometer scale, and planar homogeneity at the centimeter scale. We expect that this LbL-based catalyst immobilization strategy will contribute to the fundamental understanding of the scalability and control of highly efficient electrocatalysts at the interface for practical applications.

Atomic Layer Deposition of Al-Doped MoS2: Synthesizing a p-type 2D Semiconductor with Tunable Carrier Density

Extrinsically doped two-dimensional (2D) semiconductors are essential for the fabrication of high-performance nanoelectronics among many other applications. Herein, we present a facile synthesis method for Al-doped MoS₂ via plasma-enhanced atomic layer deposition (ALD), resulting in a particularly sought-after p-type 2D material. Precise and accurate control over the carrier concentration was achieved over a wide range (10¹⁷ up to 10²¹ cm^-3) while retaining good crystallinity, mobility, and stoichiometry. This ALD-based approach also affords excellent control over the doping profile, as demonstrated by a combined transmission electron microscopy and energy-dispersive X-ray spectroscopy study. Sharp transitions in the Al concentration were realized and both doped and undoped materials had the characteristic 2D-layered nature. The fine control over the doping concentration, combined with the conformality and uniformity, and subnanometer thickness control inherent to ALD should ensure compatibility with large-scale fabrication. This makes Al:MoS₂ ALD of interest not only for nanoelectronics but also for photovoltaics and transition-metal dichalcogenide-based catalysts.

Non-Equilibrium Synthesis of Highly Active Nanostructured, Oxygen-Incorporated Amorphous Molybdenum Sulfide HER Electrocatalyst

Molybdenum sulfide emerged as promising hydrogen evolution reaction (HER) electrocatalyst thanks to its high intrinsic activity, however its limited active sites exposure and low conductivity hamper its performance. To address these drawbacks, the non-equilibrium nature of pulsed laser deposition (PLD) is exploited to synthesize self-supported hierarchical nanoarchitectures by gas phase nucleation and sequential attachment of defective molybdenum sulfide clusters. The physics of the process are studied by in situ diagnostics and correlated to the properties of the resulting electrocatalyst. The as-synthesized architectures have a disordered nanocrystalline structure, with nanodomains of bent, defective S-Mo-S layers embedded in an amorphous matrix, with excess sulfur and segregated molybdenum particles. Oxygen incorporation in this structure fosters the creation of amorphous oxide/oxysulfide nanophases with high electrical conductivity, enabling fast electron transfer to the active sites. The combined effect of the nanocrystalline pristine structure and the surface oxidation enhances the performance leading to small overpotentials, very fast kinetics (35.1 mV dec-1 Tafel slope) and remarkable long-term stability for continuous operation up to -1 A cm-2. This work shows possible new avenues in catalytic design arising from a non-equilibrium technique as PLD and the importance of structural and chemical control to improve the HER performance of MoS-based catalysts.

Ag-Decorated MoSx Laminar-Film Electrocatalyst Made with Simple and Scalable Magnetron Sputtering Technique for Hydrogen Evolution: A Defect Model to Explain the Enhanced Electron Transport

The active edge site, surface defect, and noble-metal nanoparticle have been engineered to improve the electrocatalytic activity of earth-abundant and layered MoS₂, but there was no single and facile process to achieve all yet. Here, basal-plane-defected Ag/MoS_x lamellae with different Ag contents were deposited by one-step, single-cermet target (ceramic + metal) magnetron sputtering for the electrocatalytic hydrogen evolution reaction (HER). Ag/MoS_x (10 vol %) showed a current density of 10 mA/cm² at an overpotential of 120 mV with a Tafel slope of 42 mV/dec in a 0.5 M H₂SO₄ solution. The HER performance of Ag-MoS_x lamellae was higher than that of the Ag-free one due to the activated basal antisite defects and the decorated Ag for enhancing electron transport. The green magnetron sputtering technique together with the target design has achieved Ag/MoS_x lamellae with the film grown using the advantages of active edge-up lamella, S vacancy-type basal sites, and electron transport-enhanced Ag interconnect for enhancing hydrogen evolution.

Theoretical investigation on the hydrogen evolution reaction mechanism at MoS2 heterostructures: the essential role of the 1T/2H phase interface

DFT calculations have been performed to study the HER mechanism at 1T/2H MoS₂ heterostructures. The HER activity along the 1T/2H phase interface is comparable with those at the Mo-edge of 2H MoS₂ and the basal plane of 1T MoS₂.

Electrochemical Hydrogen Evolution over Hydrothermally Synthesized Re-Doped MoS2 Flower-Like Microspheres

In this research, we report a simple hydrothermal synthesis to prepare rhenium (Re)- doped MoS₂ flower-like microspheres and the tuning of their structural, electronic, and electrocatalytic properties by modulating the insertion of Re. The obtained compounds were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Structural, morphological, and chemical analyses confirmed the synthesis of poorly crystalline Re-doped MoS₂ flower-like microspheres composed of few stacked layers. They exhibit enhanced hydrogen evolution reaction (HER) performance with low overpotential of 210 mV at current density of 10 mA/cm², with a small Tafel slope of 78 mV/dec. The enhanced catalytic HER performance can be ascribed to activation of MoS₂ basal planes and by reduction in charge transfer resistance during HER upon doping.

Versatile Applications of Metal Single-Atom @ 2D Material Nanoplatforms

Recently, emerging 2D material-supported metal single-atom catalysts (SACs) are receiving enormous attention in heterogeneous catalysis. Due to their well-defined, precisely located metal centers, unique metal-support interaction and identical coordination environment, these catalysts serve as excellent models for understanding the fundamental issues in catalysis as well as exhibiting intriguing practical applications. Understanding the correlations between metal-support combinations and the catalytic performance at the atomic level can be achieved on the SACs@2D materials nanoplatforms. Herein, recent advances of metal SACs on various types of 2D materials are reviewed, especially their exciting applications in the fields of chemicals, energy, and the environment. Based on the summary and perspectives, this work should contribute to the rational design of perfect metal SACs with versatile properties.

Catalysis with Two-Dimensional Materials Confining Single Atoms: Concept, Design, and Applications

Two-dimensional materials and single-atom catalysts are two frontier research fields in catalysis. A new category of catalysts with the integration of both aspects has been rapidly developed in recent years, and significant advantages were established to make it an independent research field. In this Review, we will focus on the concept of two-dimensional materials confining single atoms for catalysis. The new electronic states via the integration lead to their mutual benefits in activity, that is, two-dimensional materials with unique geometric and electronic structures can modulate the catalytic performance of the confined single atoms, and in other cases the confined single atoms can in turn affect the intrinsic activity of two-dimensional materials. Three typical two-dimensional materials are mainly involved here, i.e., graphene, g-C₃N₄, and MoS₂, and the confined single atoms include both metal and nonmetal atoms. First, we systematically introduce and discuss the classic synthesis methods, advanced characterization techniques, and various catalytic applications toward two-dimensional materials confining single-atom catalysts. Finally, the opportunities and challenges in this emerging field are featured on the basis of its current development.

Recent Advances in the Solution-Based Preparation of Two-Dimensional Layered Transition Metal Chalcogenide Nanostructures

The precise control in size/thickness, composition, crystal phases, doping, defects, and surface properties of two-dimensional (2D) layered transition metal chalcogenide (TMC) is important for the investigation of interwoven relationship between structures, functions, and practical applications. Of the multiple synthetic routes, solution-based top-down and bottom-up chemical methods have been uniquely important for their potential to control the size and composition at the molecular level in addition to their scalability, competitive production cost, and solution processability. Here, we introduce an overview of the recent advances in the solution-based preparation routes of 2D layered TMC nanostructures along with important scientific developments.