Removal of Procion Red MX-5B dye from wastewater by conductive-diamond electrochemical oxidation

Study of the Preparation and Performance of TiO2-Based Magnetic Regenerative Adsorbent

Against the backdrop of "carbon neutrality", the green treatment of dye wastewater is particularly important. Currently, the adsorption method shows strong application prospects. Therefore, selecting efficient and recyclable adsorbents is of significant importance. TiO2 is an excellent adsorbent, but its difficult recovery often leads to secondary pollution. γ-Fe2O3-modified coal-series kaolin exhibits both excellent adsorption properties and rapid separation through magnetic separation technology. By utilizing the synergistic effects of both, TiO2/-γFe2O3 coal-series kaolin, magnetic adsorbent regeneration materials were prepared using coprecipitation method and characterized. The influencing factors of this functional material on the adsorption of Congo red dye and its regeneration performance are discussed. The experimental results indicated that the specific surface area, pore volume and Ms value of this functional material are 127.5 m2/g, 0.38 cm3/g, and 13.4 emu/g, respectively. It exhibits excellent adsorption characteristics towards Congo red, with an adsorption rate reaching 96.8% within 10 min, conforming to the pseudo-second-order kinetic model, and demonstrating Langmuir IV-type monolayer adsorption. After the adsorption of Congo red, magnetic separation shows superior efficiency. Furthermore, treatment of the adsorbed composite with EDTA allows for recycling, with adsorption rates still above 91% after three cycles, indicating an excellent regeneration capability.

A novel sponge composite of chitosan-sodium tripolyphosphate-melamine for anionic dye Orange II removal

Since the potential carcinogenic, toxic and non-degradable dyes trigger serious environmental contamination by improper treatment, developing novel adsorbents remains a major challenge. A novel high efficiency and biopolymer-based environmental-friendly adsorbent, chitosan‑sodium tripolyphosphate-melamine sponge (CTS-STPP-MS) composite, was prepared for Orange II removing with chitosan as raw material, sodium tripolyphosphate as cross-linking agent. The composite was carefully characterized by SEM, EDS, FT-IR and XPS. The influence of crosslinking conditions, dosage, pH, initial concentration, contacting time and temperature on adsorption were tested through batch adsorption experiments. CTS-STPP-MS adsorption process was exothermic, spontaneous and agreed with Sips isotherm model accompanying the maximum adsorption capacity as 948 mg∙g-1 (pH = 3). Notably, the adsorption performance was outstanding for high concentration solutions, with a removal rate of 97 % in up to 2000 mg∙L-1 OII solution (100 mg sorbent dosage, 50 mL OII solution, pH = 3, 289.15 K). In addition, the adsorption efficiency yet remained 97.85 % after 5 repeated adsorption-desorption cycles. The driving force of adsorption was attributed to electrostatic attraction and hydrogen bonds which was proved by adsorption results coupled with XPS. Owing to the excellent properties of high-effective, environmental-friendly, easy to separate and regenerable, CTS-STPP-MS composite turned out to be a promising adsorbent in contamination treatment.

Advances from conventional to biochar enhanced biotreatment of dyeing wastewater: A critical review

DW (Dyeing wastewater) contains a large amount of dye organic compounds. A considerable proportion of dye itself or its intermediate products generated during wastewater treatment process exhibits CMR (Carcinogenic/Mutagenic/Toxic to Reproduction) toxicity. Compared with physicochemical methods, biological treatment is advantageous in terms of operating costs and greenhouse gas emissions, and has become the indispensable mainstream technology for DW treatment. This article reviews the adsorption and degradation mechanisms of dye organic compounds in wastewater and analyzed different biological processes, ranging from traditional methods to processes enhanced by biochar (BC). For traditional biological processes, microbial characteristics and communities were discussed, as well as the removal efficiency of different bioreactors. BC has adsorption and redox electron mediated effects, and coupling with biological treatment can further enhance the process of biosorption and degradation. Although BC coupled biological treatment shows promising dye removal, further research is still needed to optimize the treatment process, especially in terms of technical and economic competitiveness.

Recent developments on advanced oxidation processes for degradation of pollutants from wastewater with focus on antibiotics and organic dyes

The existence of various pollutants in water environment contributes to global pollution and poses significant threats to humans, wildlife, and other living beings. The emergence of an effective, realistic, cost-effective, and environmentally acceptable technique to treat wastewater generated from different sectors is critical for reducing pollutant accumulation in the environment. The electrochemical advanced oxidation method is a productive technology for treating hazardous effluents because of its potential benefits such as lack of secondary pollutant and high oxidation efficiency. Recent researches on advanced oxidation processes (AOPs) in the period of 2018-2022 are highlighted in this paper. This review emphasizes on recent advances in electro-oxidation (EO), ozone oxidation, sonolysis, radiation, electro-Fenton (EF), photolysis and photocatalysis targeted at treating pharmaceuticals, dyes and pesticides polluted effluents. In the first half of the review, the concept of the AOPs are discussed briefly. Later, the influence of increasing current density, pH, electrode, electrolyte and initial concentration of effluents on degradation are discussed. Lastly, previously reported designs of electrochemical reactors, as well as data on intermediates generated and energy consumption during the electro oxidation and Fenton processes are discussed. According to the literature study, the electro-oxidation technique is more appropriate for organic compounds, whilst the electro-Fenton technique appear to be more appropriate for more complex molecules.

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Lignosulfonate/polyaniline (LS/PANI) nanocomposite adsorbent materials were prepared by the chemical polymerization of lignosulfonate with an aniline monomer as a dopant and structure-directing agent, and the adsorption behavior of dyes as well as heavy metal ions was investigated. LS/PANI composites were used as dye adsorbents for the removal of different cationic dyes (malachite green, methylene blue, and crystal violet). The adsorption behavior of LS/PANI composites as dye adsorbents for malachite green was investigated by examining the effects of the adsorbent dosage, solution pH, initial concentration of dye, adsorption time, and temperature on the adsorption properties of this dye. The following conclusions were obtained. The optimum adsorption conditions for the removal of malachite green dye when LS/PANI composites were used as malachite green dye adsorbents were as follows: an adsorbent dosage of 20 mg, an initial concentration of the dye of 250 mg/L, an adsorption time of 300 min, and a temperature of 358 K. The LS/PANI composite adsorbed malachite green dye in accordance with the Langmuir adsorption model and pseudo-second-order kinetic model, which belongs to chemisorption-based monomolecular adsorption, and the equilibrium adsorption amount was 245.75 mg/g. In particular, the adsorption of heavy metal ion Pb2+ was investigated, and the removal performance was also favorable for Pb2+.

Quantitative structure-activity relationship(QSAR) models for color and COD removal for some dyes subjected to electrochemical oxidation

Electrochemical oxidation is an efficient method for the destruction of dyes in wastewater streams. The experimental conditions during electrochemical oxidation (EO) and molecular structure of a dye greatly influence the extent of degradation. The extent of degradation for a variety of dyes by EO can be predicted conveniently by the use of Quantitative structure-activity Relationship (QSAR) models. An abundant amount of published data on dye degradation by EO using highly variable experimental conditions lies unutilized to prepare QSAR models. In this study, an effort is made to use published experimental data on EO of aqueous dyes after applying an easy method of normalization, to prepare QSAR models for percent color and COD removal. Normalized color and COD removal were obtained by multiplying the reported removal by volume of reactor and concentration of dye; and divided by total current passed and the time of electrolysis. More than 15 molecular descriptors were computed using Schrodinger-suit 2018-3. The multiple linear regression (MLR) approach was used to develop normalized color and COD removal models. The quantum chemical descriptors: highest occupied molecular orbital energy (HOMO) and lowest unoccupied molecular orbital energy (LUMO), polar surface area (PSA), hydrogen bond donor count (HBD), and number of atoms were found significant. The statistical indices: goodness-of-fit, R² > 0.75, and internal and external validations, Q²_LOOCV and Q²_ext, > 0.5, satisfied the criteria for predictive models and indicated that the method of normalization used in this study is adequate. Developed QSAR models are quite simple, interpretable, and transparent.

Electrochemical treatment of electroplating wastewater using synthesized GO/TiO2 nanotube electrode

The graphene oxide (GO) deposited TiO₂ nanotube (GO/TiO₂) electrode on a titania plate was prepared using a simple anodization method. The morphological and structural properties of TiO₂ and GO/TiO₂ electrodes have been studied using field emission scanning electron microscopy energy dispersive spectroscopy (FESEM-EDS), X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), Raman spectroscopy, Fourier transform infrared spectra (FT-IR), and X-ray photoelectron spectroscopy (XPS). FESEM-EDS analysis confirmed that the 13.56% wt of GO nanoparticles was formed over the TiO₂ substrate, with the thickness of the wall to be ∼300 nm. The crystallite size of GO/TiO₂, i.e., 19.53 nm, was confirmed by XRD analysis. Analysis of the UV-DRS spectrum showed the bandgap of the synthesized GO/TIO₂ nanotube electrode to be 3.052 eV. Box-Behnken design (BBD) under response surface methodology (RSM) was used to design the experiments. The effect of operating input parameters like pH, current (i), and degradation time (t) on % COD degradation (X₁) and energy consumed (X₂) were also examined. At optimum process parameters, the value of X₁ and X₂ were 57.61% and 15.00 kWh/m³, respectively. Possible intermediates were identified based on the GC-MS data analysis. Scavenger tests showed that •OH radical plays a major role in electroplating effluents degradation. Based on the results, the EO process using GO/TiO₂ electrodes could be considered a promising technique for electroplating effluent degradation due to high degradation efficiency.

Polymer hydrogels for stabilization of inorganic nanoparticles and their application in catalysis for degradation of toxic chemicals

Poly(styrene-N-isopropylmethacrylamide-methacrylic acid) core-shell [P(SNM)CS] microgel particles were synthesised by seed-mediated emulsion polymerisation method. Silver nanoparticles were loaded into shell of P(SNM)CS microgels by in situ reduction of Ag⁺ ions. Synthesised core-shell microgels and hybrid core-shell microgels were characterised by using Fourier transformed infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), UV-Visible spectroscopy and Dynamic light scattering (DLS). Stability of Ag nanoparticles within P(SNM)CS system was also investigated over the time using UV-Visible spectroscopy. Catalytic properties of silver nanoparticles loaded microgel system [Ag-P(SNM)CS] were studied by reducing Eosin-Y and Methylene blue with NaBH₄ in water. The values of observed rate constant (k_obs) were determined under different reaction conditions. The hybrid system was capable to degrade both dyes and may be used for degradation of several other toxic chemicals efficiently.

Fabrication of high performance Ti/SnO2-Nb2O5 electrodes for electrochemical textile wastewater treatment

Textile wastewater contains many organic compounds and colors that affect aquatic life and human health when discharged into the environment. High coloration due to excess dyes entering the wastewater causes coloration to the receiving water stream, affects the photosynthesis process of aquatic species, and adversely affects the landscape. SnO₂-based electrodes have been extensively used in electrochemical water treatment, but their low durability decreases the pollutant treatment ability. Therefore, it is necessary to add another stable oxide to improve the performance and stability of SnO₂ electrodes. This study aims to fabricate Ti/SnO₂-Nb₂O₅ electrodes for the textile wastewater treatment using the electrochemical oxidation method. Different molar ratios of SnO₂:Nb₂O₅ coating were prepared using the sol-gel method and then coated on the Ti substrates for calcination in 60 min at 500 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer Emmett Teller (BET), and cyclic voltammetry (CV) were used to determine the surface and electrochemical properties of Ti/SnO₂-Nb₂O₅ electrodes. The SEM images show that SnO₂-Nb₂O₅ electrode surfaces have the appearance of typical cracking structures of mixed metal oxides electrodes. The XRD spectrum show the SnO₂ peaks of facet (110), (101), (200), (301), (321) and Nb₂O₅ peaks of facet (001), (002), (100), (101), (102) on Ti substrates. Furthermore, the specific surface area of the Ti/SnO₂-Nb₂O₅ electrode ranges from 37.354 m²/g (SnO₂:Nb₂O₅ = 9:1) to 71.885 m²/g (SnO₂:Nb₂O₅ = 1:9). The electrochemical properties of SnO₂:Nb₂O₅ electrodes showed high oxygen, chlorine evolution potential and high organic pollutant degradation in textile wastewater with COD removal at 83 %, decolorization at 74 % and the generation of many free radicals such as HO^•, H₂O₂, O₃, Cl₂. The results demonstrate that the Ti/SnO₂-Nb₂O₅ electrode with the mole ratio of 3:7 is the best in textile wastewater treatment with the longest service life (39 h).

Removal of dyes, oils, alcohols, heavy metals and microplastics from water with superhydrophobic materials

A wide variety of pollutants can be currently found in water that are extremely difficult to remove due to their chemical composition and properties. A lot of effort has been made to tackle this issue that directly affects the environment. In this scenario, superhydrophobic surfaces, which have a water contact angle >150°, have emerged as an innovative technology that could be applied in different ways. Their environmental applications show promise in removing emerging pollutants from water. While the number of publications on superhydrophobic materials has remained largely unchanged since 2019, the number of articles on the environmental applications of superhydrophobic surfaces is still rising, corroborating the interest in this area. Herein, we briefly present the basis of superhydrophobicity and show the different materials that have been used to remove pollutants from water. We have identified five types of emerging pollutants that are efficiently removed by superhydrophobic materials: oils, microplastics, dyes, heavy metals, and ethanol. Finally, the future challenges of these applications are also discussed, considering the state of the art of the environmental applications of superhydrophobic materials.

Characterization of Immobilized Magnetic Fe3O4 Nanoparticles on Raoultella Ornithinolytica sp. and Its Application for Azo Dye Removal

A high-performance immobilized bacterial strain coated with magnetic iron oxide nanoparticles was used for Basic Blue 41 azo dye (BB 41 dye) decolorization. To create the coated bacterial strain, Raoultella Ornithinolytica sp. was isolated and identified under the accession number KT213695, then coated with manufactured magnetic iron oxide nanoparticles. SEM and SEM-EDX were used to characterize the coated bacteria and validate its morphological structure formation. The coated Raoultella Ornithinolytica sp. A1 (coated A1) generated a 95.20% decolorization for BB 41 dye at 1600 ppm starting concentration with an optimal dose of coated A1 5 mL/L, pH 8, under static conditions for 24 h at 37 °C. Continuous batch cycles were used, with BB 41 dye (1600 ppm) added every 24 h four times, to achieve a high decolorization efficiency of 80.14%. Furthermore, the metabolites of BB 41 dye biodegradation were investigated by gas chromatographic-mass spectrum analysis (GC-MS) and showed a less toxic effect on the bioindicator Artemia salina. Additionally, 5 mL/L of coated A1 demonstrated the highest decolorization rate (47.2%) when applied to a real wastewater sample after 96 h with a consequent reduction in COD from 592 to 494 ppm.

Degradation of methylene blue through Fenton-like reaction catalyzed by MoS2-doped sodium alginate/Fe hydrogel

In this study, a low-cost and high-performance MoS2/sodium alginate (SA)/Fe (MSF) hydrogel catalyst was prepared. It was found that the MSF hydrogel could efficiently catalyze the degradation of methylene blue (MB) through the Fenton reaction without the addition of Fe2+. The reaction was initiated by Fe2+ which was derived from the cyclic redox reaction between MoS2 and Fe3+ and produced large quantities of ·OH to degrade the MB. The effect of MoS2 concentration, FeCl3·6H2O concentration, H2O2 dosage, solution pH, and light on the degradation was systematically studied. The MoS2 concentration of 0.5 mg/ mL, FeCl3·6H2O concentration of 0.25 g/mL, 50 μL H2O2, and the pH of 4.0 were the optimized parameters. Moreover, it was found that the MB degraded faster under the infrared radiation. The MB removal rate reached as high as 98% within 15 min in the presence of a low concentration of H2O2 and the procedure could be repeated 5 times. The MSF hydrogel provided an effective and simple strategy for the sustainable degradation of organic pollutants in wastewater.

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

A Comprehensive Review of Effective Adsorbents Used for the Removal of Dyes from Wastewater

Aim:

The objective of the review paper aims to explore and to provide the insight of various low-cost adsorbents prepared and used in the removal of hazardous dye pollutants from the contaminated industrial effluents.

Background:

The major untreated discharge from the textile industries constitutes a wide range of organic contaminants with the enhanced concentration of biological oxygen demand and chemical oxygen demand inthe water bodies. Dyes are considered as the major water contaminants and this quest the researchers to adopt various technologies to remove the hazardous dye pollutants from the aquatic environment. Dyes are the chemical compounds that tend to adhere themselves with metal or salts by covalent bond formation or complexes by mechanical retention or physical adsorption so as to impart colours to which it is being applied.

Objective:

Numerous treatment methodologies which have been applied to the degradation of dyes. The current study has been focused on the distinct low cost and cost-effective adsorbents used in the removal of various dye pollutants. Also, the application of nanoparticles in the removal of the hazardous dye pollutants had received great interest because of its size and high reactive nature.

Methods:

The treatment technologies used in the removal of dye pollutants from wastewater have been listed as adsorption, coagulation, electrocoagulation, flocculation, membrane filtration, oxidation and biological treatment.

Results:

The complex structure of the dyes causes a great harmful impact on the aquatic environment. Though numerous treatment technologies have been applied, adsorption has been preferred by various researchers because of its cost-effective nature.

Conclusion:

The various adsorbents are used in the removal of cationic, anionic and non-ionic dyes. The different types of adsorbent from agricultural waste, activated carbons, nanomaterials and biomaterials have been discussed with the advantages and limitations.

Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review

Industrial contaminants such as dyes and intermediates are released into water bodies, making the water unfit for human use. At the same time large amounts of food wastes accumulate near the work places, residential complexes etc. polluting the air due to putrefaction. The need of the hour lies in finding innovative solutions for dye removal from wastewater streams. In this context, the article emphasizes adoption or conversion of food waste materials, an ecological nuisance, as adsorbents for the removal of dyes from wastewaters. Adsorption, being a well-established technique, the review critically examines the specific potential of food waste constituents as dye adsorbents. The efficacy of food waste-based adsorbents is examined, besides addressing the possible adsorption mechanisms and the factors affecting phenomenon such as pH, temperature, contact time, adsorbent dosage, particle size, and ionic strength. Integration of information and communication technology approaches with adsorption isotherms and kinetic models are emphasized to bring out their role in improving overall modeling performance. Additionally, the reusability of adsorbents has been highlighted for effective substrate utilization. The review makes an attempt to stress the valorization of food waste materials to remove dyes from contaminated waters thereby ensuring long-term sustainability.

Microbial approaches for sustainable remediation of dye-contaminated wastewater: a review

The coloured effluents produced from different industries, such as textile, plastics, printing, cosmetics, leather and paper, are extremely toxic and a tremendous threat to the aquatic organisms and human beings. The removal of coloured dye pollutants from the aqueous environment is a great challenge and a pressing task. The growing demand for low-cost and efficient treatment approaches has given rise to alternative and eco-friendly methods, such as biodegradation and microbial remediation. This work summarizes the overview and current research on the remediation of dye pollutants from the aqueous environment by microbial bio-sorbents, such as bacteria, fungi, algae, and yeast. In addition, dye degradation capabilities of microbial enzymes have been highlighted and discussed. Further, the influence of various experimental parameters, such as temperature, pH, and concentrations of nutrients, and dye, has been summarized. The proposed mechanism for dye removal by microorganisms is also discussed. The object of this review is to provide a state-of-the-art of microbial remediation technologies in eliminating dye pollutants from water resources.

Synthesis, characterization, and dye degradation photocatalytic activity of the nano-size copper iron binary oxide

Magnetic nano-size copper iron binary oxide is synthesized via a sol-gel method using copper and iron nitrates as precursors and citric acid, chicken egg white, and starch as stabilizers followed by annealing at 400 °C and 800 °C in air. The TG-DTG, XRD, FESEM, EDX, VSM, and FT-IR and UV-Vis DRS spectroscopy methods are used for thermal, structural, magnetic, and optoelectronic characterizations. Depending on the stabilizer and annealing temperature, pure CuFe₂O₄, (CuFe₂O₄,CuO) or (CuFe₂O₄,CuO,Fe₂O₃) phases are formed with nano-size particles of 20-65 nm, having optical band gaps in the range of 2.15-2.60 eV (577-477 nm). Photocatalytic activities of the synthesized nano-size copper iron binary oxide samples are examined for degradation of Nile Blue textile dye displayed first-cycle removal (from water solution) efficiencies of 86.7-93.3%. Considering usage of non-toxic metals and low-cost green stabilizers, good degradation performances, and easy/efficient (magnetic) recyclability, this nano-size catalyst is suggested for further optimization studies for industrial applications.

Using Sawdust Derived Biochar as a Novel 3D Particle Electrode for Micropollutants Degradation

This work examined the use of a 3D combined electrochemical process based on particle electrodes from sawdust-derived biochar pyrolized at T = 550–850 °C to remove persistent pollutants. The as-prepared biochar was characterized by scanning electron microscopy with an X-ray energy dispersive spectrometer (SEM/EDS), nitrogen adsorption (BET method) and X-ray diffraction (XRD) techniques. The use of sawdust biochar pyrolized at 650 °C led to a significant increase in efficiency against the sum of conventional 2D electrochemical systems and adsorption, and the synergy index estimated equal to 74.5% at optimum conditions. Sulfamethoxazole (SMX) removal was favored by increasing particle electrode loading. Despite that, the reaction was slightly favored in near-neutral conditions; the system retained most of its activity in the pH range 3–10. The proposed 3D system could degrade different micropollutants, namely SMX, Bisphenol A (BPA), Propylparaben (PP), and Piroxicam (PR). Of particular interest was that no significant reduction in degradation was observed in the case of complex or real water matrices. In addition, the system retained its efficiency regarding SMX removal after five sequential experiments in the 3D combined electrochemical process. However, further investigation is needed to estimate the contribution of the different mechanisms of micropollutant removal in the proposed system.

Treatment of phenolic compound wastewater using CuFe2O4/Al2O3 particle electrodes in a three-dimensional electrochemical oxidation system

Three-dimensional electrochemical oxidation (3D-ECO) technology is considered as one of the most promising advanced oxidation processes for degrading refractory organic pollutants. However, the preparation of the particle electrodes (PEs) is a key factor for industrial applications. In this study, a new Al₂O₃-based PE was proposed for 3D-ECO system. The prepared PEs were characterized by scanning electron microscopy, energy-dispersive X-ray microscopy, and X-ray diffraction to examine their morphology, elementary composition, and amount of CuFe₂O₄ respectively. Experiments comparing different conditions showed that 3D-ECO system equipped with prepared PEs and persulphate (PS) was more efficient in degradingp-nitrophenol (PNP). Based on these results, the critical process parameters of the dosage of the PEs, initial PS concentration, and current density for 3D-ECO using the proposed PEs were examined. Under the optimized operations, the PNP removal rate reached 80.23% with a low electrical energy consumption of 3.97 kW h/mg PNP, which was significantly better than the 69.16% and 9.50 kW·h/mg PNP under conventional ECO process. Moreover, cycling experimental results indicated that the performance of the PEs had no declining trend during the 5 h test period, suggesting acceptable stability of the particles without particle damage or mass loss. These investigations provide a novel route for preparing high-efficiency PEs.

Advanced graphene oxide-based membranes as a potential alternative for dyes removal: A review

Graphene oxide (GO) is one of the most well-known graphene derivatives which, due to its outstanding chemical, electrical and optical properties as well as its high oxygen content, has been recently applied in several fields such as in the construction of sensors, as antimicrobial agent for biomedical applications, as well as nanofiller material for membranes applied in wastewater treatment. In this last-mentioned field, the synthesis and functionalization of membranes with GO has proven to improve the performance of membranes applied in the treatment of wastewater containing dyes, regarding antifouling behavior, selectivity and flux. In this review, an overview of water pollution caused by effluents containing synthetic dyes, the advantages and limitations of GO-based membranes and the latest research advances on the use of GO-based membranes for dyes removal, including its impact on membrane performance, are discussed in detail. The future panorama of the applicability of GO-based membranes for the treatment of water contaminated by dyes is also provided.

Adsorption of Reactive Dye onto Uçá Crab Shell (Ucides cordatus): Scale-Up and Comparative Studies

The growing interest in using low-cost methods that use natural sources makes the study of adsorption processes increasingly frequent and common. Thus, the use of uçá crab shell (Ucides cordatus) in the adsorption of reactive dye (reactive blue 222) was studied in two systems (S1 and S2) in a finite bath, with a scale-up of 12 times and considering different forms of agitation. The biosorbent material was previously characterized from FTIR and EDX spectroscopies, SEM, physical adsorption of N2, and point of zero charge. The kinetic study allowed modeling the experimental data and defining the equilibrium time for the S1 system as 400 min, and the S2 system as 360 min. The equilibrium adsorption capacities are 3.623 mg·g−1 (S1) and 4.191 mg·g−1 (S2). The pseudo-second-order (PSO) model best described the experimental data. The favorable multilayer adsorption was confirmed for the isothermal analysis, and the Freundlich and Sips models represented the experimental data of S1 and S2, respectively. The results obtained are positive indications of the scale-up of the S2 system.

Recent Advances in Biopolymer-Based Dye Removal Technologies

Synthetic dyes have become an integral part of many industries such as textiles, tannin and even food and pharmaceuticals. Industrial dye effluents from various dye utilizing industries are considered harmful to the environment and human health due to their intense color, toxicity and carcinogenic nature. To mitigate environmental and public health related issues, different techniques of dye remediation have been widely investigated. However, efficient and cost-effective methods of dye removal have not been fully established yet. This paper highlights and presents a review of recent literature on the utilization of the most widely available biopolymers, specifically, cellulose, chitin and chitosan-based products for dye removal. The focus has been limited to the three most widely explored technologies: adsorption, advanced oxidation processes and membrane filtration. Due to their high efficiency in dye removal coupled with environmental benignity, scalability, low cost and non-toxicity, biopolymer-based dye removal technologies have the potential to become sustainable alternatives for the remediation of industrial dye effluents as well as contaminated water bodies.

Factors Determining the Removal Efficiency of Procion MX in Waters Using Titanate Nanotubes Catalyzed by UV Irradiation

The treatment of wastewater from the textile industry containing organic dyes faces many challenges since these compounds resist the biodegradation process in conventional treatment units. Among the physicochemical processes, photocatalysis is considered a facile, cheap, and environmental-friendly technology for treating persistent organic pollutants in waters at low concentrations. This study investigated several physicochemical factors determining the photocatalytic activity of titanate nanotubes (TNTs) to remove Procion MX 032 (PMX), an azo dye, in waters. Degradation of PMX by photocatalytic oxidation process at room temperature (30°C) was set up with the UV irradiation in the presence of different types of photocatalyst such as ST-01 (100% anatase), industrial TiO2, TNTs calcined at 120°C and 500°C. Effect of reaction time, catalyst amount, pH, light wavelength and intensity, and oxidants was investigated. Consequently, TNTs calcined at 500°C provided the highest removal efficiency. The photocatalytic oxidation of PMX by TNT calcined at 500°C was affected by pH variation, getting the highest removal at pH of 8, and inhibited with the presence of H2O2 and O2. Particularly, the PMX degradation using titanate nanotubes was optimized under the UV-A intensity of 100 W/m2. The dye was degraded by more than 95% at the TNTs concentration of 75 mg/L and pH 8.0 after 90 min. The results suggest that photocatalysis using TNTs can be a simple but efficient treatment method to remove PMX and potentially be applied for the treatment of wastewaters containing dyes.

Villi-like poly(acrylic acid) based hydrogel adsorbent with fast and highly efficient methylene blue removing ability

Organic dye-containing wastewater has become an increasingly serious environmental problem due to the rapid development of the printing and dyeing industry. Hydrogel is a promising adsorbent for organic dyes because of its unique three-dimension network structure and versatile functional groups. Though many efforts have been made in hydrogel adsorbents recently, there is still a critical challenge to fabricate hydrogel adsorbent with high adsorption capacity and high efficiency at the same time. To address this concern, we developed a calcium hydroxide nano-spherulites/poly(acrylic acid -[2-(Methacryloxy)ethyl]trimethyl ammonium chloride) hydrogel adsorbent with novel villi-like structure. The hydrogels were prepared through a simple free radical copolymerization method using calcium hydroxide nano-spherulites as crosslinker. The resultant hydrogel adsorbents showed a maximum adsorption capacity of 2249 mg/g in a 400 mg/L methylene blue solution and a high removal ratio of 98% in 1 h for a 50 mg/L methylene blue solution. In addition, the adsorption behaviors of our hydrogel adsorbents could be well described by pseudo-second-order kinetic model and Langmuir adsorption isotherm model. Furthermore, this kind of hydrogel adsorbent showed selective adsorption behavior for methylene blue. Altogether, the hydrogel adsorbent developed in this work has a high capacity and high efficiency in organic dye removing and promised a great potential in wastewater treatment application.

Electrochemical treatment of real petrochemical effluent: current density effect and toxicological tests

This work aims to investigate the electrochemical treatment of petrochemical industry effluents (from the northwest region of Brazil) mediated by active chlorine species electrogenerated at ruthenium-titanium oxide supported in titanium (Ti/Ru_0.3Ti_0.7O₂) and boron doped diamond (BDD) anodes by applying 15 and 45 mA cm^-2. Chemical oxygen demand (COD) determinations and toxicity analyses were carried out in order to evaluate the process extension as well as the possible reuse of the wastewater after treatment. Toxicity was evaluated by assessing the inhibition of lettuce (Lactuca sativa) stem growth, seed germination, and the production of nitrite (NO^-₂) and nitrate (NO^-₃) species. Results clearly showed that the best COD reduction performances were reached at the BDD anode, achieving almost 100% of removal in a short time. Degradation of nitrogen-organic compounds generated NO^-₂ and NO^-₃ which act as nutrients for lettuce. Toxicity results also indicated that the electrogenerated active chlorine species are persistent in the effluent after the treatment, avoiding the stem growth, and consequently affecting the germination.

Electrochemical oxidative degradation of X-6G dye by boron-doped diamond anodes: Effect of operating parameters

Boron-doped diamond (BDD) is an excellent electrode material. As the anode in an electrochemical degradation tank, BDD has been receiving widespread attention for the treatment of azo dye wastewater. In this study, electrochemical oxidation (EO) was applied to electrolyze reactive brilliant yellow X-6G (X-6G) using BDD as the anode and Pt as the cathode. To balance the degradative effects and power consumption in the electrolysis process, the effects of a series of operating parameters, including current density, supporting electrolyte, initial pH, reaction temperature and initial dye concentration, were systematically studied. The oxidative process was analyzed by color removal rate, and the degree of mineralization was evaluated by TOC. The optimal experimental parameters were finally determined: 100 mA cm^-2, 0.05 M Na₂SO₄ electrolyte, pH 3.03, 60 °C, and an initial X-6G concentration of 100 mg L^-1. As a result, color completely disappeared after 0.75 h of electrolysis, and TOC was removed by 72.8% after 2 h of electrolysis. In conclusion, the EO of a BDD electrode as an anode can be a potent treatment method for X-6G synthetic wastewater.

Advanced electrochemical treatment of real biotreated petrochemical wastewater by boron doped diamond anode: performance, kinetics, and degradation mechanism

Petrochemical wastewater is difficult to process because of various types of pollutants with high toxicity. With the improvement in the national discharge standard, traditional biochemical treatment methods may not meet the standards and further advanced treatment techniques would be required. In this study, electrochemical oxidation with boron doped diamond (BDD) anode as post-treatment was carried out for the treatment of real biotreated petrochemical wastewater. The effects of current density, pH value, agitation rate, and anode materials on chemical oxygen demand (COD) removal and current efficiency were studied. The results revealed the appropriate conditions to be a current density of 10 mA·cm^-2, a pH value of 3, and an agitation rate of 400 rpm. Moreover, as compared with the graphite electrode, the BDD electrode had a higher oxidation efficiency and COD removal efficiency. Furthermore, GC-MS was used to analyze the final degradation products, in which ammonium chloride, formic acid, acetic acid, and malonic acid were detected. Finally, the energy consumption was estimated to be 6.24 kWh·m^-3 with a final COD of 30.2 mg·L^-1 at a current density of 10 mA·cm^-2 without the addition of extra substances. This study provides an alternative for the upgrading of petrochemical wastewater treatment plants.

Insights into electrochemical decomposition mechanism of lipopolysaccharide using TiO2 nanotubes arrays electrode

Electrochemical decomposition of lipopolysaccharide (LPS) was firstly investigated over titania nanotubes (TNTs) arrays electrode. The TNTs layer of this electrode consisted of numerous tubular structures which arranged tightly, and the average diameter of each nanotube is 100 ± 5 nm. The degradation of LPS and polysaccharides followed pseudo-first-order kinetics. The optimal LPS removal ratio was nearly 80 %. The endotoxin toxicity of LPS steadily decreased during the electrolysis process. The acute toxicity of the intermediates increased suddenly at the beginning of electrochemical degradation process (< 5 min), then maintained high inhibition ratio (> 95 %) for about 150 min, and decreased significantly (< 10 %) after electrolysis for 240 min. After 20 min of electrolysis, LPS with molecular weight of 116,854 Da was transformed into small molecular compounds with molecular weights of 59,312 - 12,209 Da. Possible degradation and detoxification mechanisms of LPS including electric-field-force-driving accumulation, adsorption and direct electron transfer on TNTs arrays electrode, and •OH oxidation were proposed. This study underscores that electrochemical technique can be applied to eliminate and decrease the toxicity of LPS from contaminated water.

Silver nanoparticles in dye effluent treatment: A review on synthesis, treatment methods, mechanisms, photocatalytic degradation, toxic effects and mitigation of toxicity

The current scenario of water resources shows the dominance of pollution caused by the draining of industrial effluents. The polluted waters have resulted in severe health and environmental hazards urging for a suitable alternative to resolve the implications. Various physical and chemical treatment steps currently in use for dye effluent treatment are more time consuming, cost-intensive, and less effective. Alternatively, nanoparticles due to their excellent surface properties and chemical reactivity have emerged as a better solution for dye removal and degradation. In this regard, the potential of silver nanoparticles in dye effluent treatment was greatly explored. Efforts were taken to unravel the kinetics and statistical optimization of the treatment conditions for the efficient removal of dyes. In addition, the role of silver nanocomposites has also experimented with colossal success. On the contrary, studies have also recognized the mechanisms of silver nanoparticle-mediated toxicity even at deficient concentrations and their deleterious biological effects when present in treated water. Hence, the fate of the silver nanoparticles released into the treated water and sludge, contaminating the soil, aquatic environment, and underground water is of significant concern. This review summarizes the current state of knowledge regarding the use of silver nanoparticles and silver-based nanocomposites in effluent treatment and comprehends the recent research on mitigation of silver nanoparticle-induced toxicity.

Transformation of bisphenol A by electrochemical oxidation in the presence of nitrite and formation of nitrated aromatic by-products

In this contribution, the electrocatalytic abatement of bisphenol A (BPA) with boron-doped diamond (BDD) anode had been conducted in NaNO₂ electrolytes. Central composite design was used as statistical multivariate method to optimize the operating parameters adopted (applied current density, flow rate, concentration of NaNO₂ and initial pH). The results from response surface analysis indicated that pH was the most influential factor for TOC decay, and a maximum TOC decay of 63.7% was achieved under the optimized operating conditions (9.04 mA cm^-2 of applied current density, 400 mL min^-1 of flow rate, 10 mM of NaNO₂, 4.0 of initial pH and 60 min of electrolysis time). Besides, LC/MS technique was applied to identify the main reaction intermediates, and plenty of nitrated oligomers were detected at the end of the degradation. These by-products were generated via the coaction of coupling reaction of nitrated phenol and electrophilic substitution mediated by nitrogen dioxide radicals. Moreover, our results showed that the degree of nitration depended heavily on the employed initial nitrite concentration. This was one of the very few investigations dealing with nitrophenolic by-products in nitrite medium, and thus the findings exhibited important implications for electrochemical degradation of BPA and its related phenolic pollutants.

Hybrid Microgels for Catalytic and Photocatalytic Removal of Nitroarenes and Organic Dyes From Aqueous Medium: A Review

Polymer microgels loaded with inorganic nanoparticles have gained much attention as catalytic systems for reduction of toxic chemicals. Enhanced catalytic properties of hybrid microgels are related to the stimuli responsive nature of microgels and extraordinary stability of nanoparticles within network of polymer microgels. Catalytic properties of hybrid microgels can be tuned very easily by slight variation in environmental conditions. Herein we have reviewed catalytic reduction of toxic chemicals such as nitroarenes and organic dyes in the presence of appropriate hybrid microgel catalytic systems under different operating conditions of reaction. Recent advancements in catalytic behavior of hybrid microgels with special emphasis on their ability to catalytically degrade various toxic chemicals has been presented in this review.