A review of microplastics in soil: Occurrence, analytical methods, combined contamination and risks

Microplastics derived from plastic mulch films and their carrier function effect on the environmental risk of pesticides

Plastic film mulching can maintain soil water and heat conditions, promote plant growth and thus generate considerable economic benefits in agriculture. However, as they age, these plastics degrade and form microplastics (MPs). Additionally, pesticides are widely utilized to control organisms that harm plants, and they can ultimately enter and remain in the environment after use. Pesticides can also be sorbed by MPs, and the sorption kinetics and isotherms explain the three stages of pesticide sorption: rapid sorption, slow sorption and sorption equilibrium. In this process, hydrophobic and partition interactions, electrostatic interactions and valence bond interactions are the main sorption mechanisms. Additionally, small MPs, biodegradable MPs and aged conventional MPs often exhibit stronger pesticide sorption capacity. As environmental conditions change, especially in simulated biological media, pesticides can desorb from MPs. The utilization of pesticides by environmental microorganisms is the main factor controlling the degradation rate of pesticides in the presence of MPs. Pesticide sorption by MPs and size effects of MPs on pesticides are related to the internal exposure level of biological pesticides and changes in pesticide toxicity in the presence of MPs. Most studies have suggested that MPs exacerbate the toxicological effects of pesticides on sentinel species. Hence, the environmental risks of pesticides are altered by MPs and the carrier function of MPs. Based on this, research on the affinity between MPs and various pesticides should be systematically conducted. During agricultural production, pesticides should be cautiously selected and used plastic film to ensure human health and ecological security.

Integrating advanced techniques and machine learning for landfill leachate treatment: Addressing limitations and environmental concerns

This review article explores the challenges associated with landfill leachate resulting from the increasing disposal of municipal solid waste in landfills and open areas. The composition of landfill leachate includes antibiotics (0.001-100 μg), heavy metals (0.001-1.4 g/L), dissolved organic and inorganic components, and xenobiotics including polyaromatic hydrocarbons (10-25 μg/L). Conventional treatment methods, such as biological (microbial and phytoremediation) and physicochemical (electrochemical and membrane-based) techniques, are available but face limitations in terms of cost, accuracy, and environmental risks. To surmount these challenges, this study advocates for the integration of artificial intelligence (AI) and machine learning (ML) to strengthen treatment efficacy through predictive analytics and optimized operational parameters. It critically evaluates the risks posed by recalcitrant leachate components and appraises the performance of various treatment modalities, both independently and in tandem with biological and physicochemical processes. Notably, physicochemical treatments have demonstrated pollutant removal rates of up to 90% for various contaminants, while integrated biological approaches have achieved over 95% removal efficiency. However, the heterogeneous nature of solid waste composition further complicates treatment methodologies. Consequently, the integration of advanced ML algorithms such as Support Vector Regression, Artificial Neural Networks, and Genetic Algorithms is proposed to refine leachate treatment processes. This review provides valuable insights for different stakeholders specifically researchers, policymakers and practitioners, seeking to fortify waste disposal infrastructure and foster sustainable landfill leachate management practices. By leveraging AI and ML tools in conjunction with a nuanced understanding of leachate complexities, a promising pathway emerges towards effectively addressing this environmental challenge while mitigating potential adverse impacts.

Micro/nanoplastics: Critical review of their impacts on plants, interactions with other contaminants (antibiotics, heavy metals, and polycyclic aromatic hydrocarbons), and management strategies

Microplastic/nanoplastics (MPs/NPs) contamination is not only emerging threat to the agricultural system but also constitute global hazard to the environment worldwide. Recent review articles have addressed the environmental distribution of MPs/NPs and their single-exposure phytotoxicity in various plant species. However, the mechanisms of MPs/NPs-induced phytotoxicity in conjunction with that of other contaminants remain unknown, and there is a need for strategies to ameliorate such phytotoxicity. To address this, we comprehensively review the sources of MPs/NPs, their uptake by and effects on various plant species, and their phytotoxicity in conjunction with antibiotics, heavy metals, polycyclic aromatic hydrocarbons (PAHs), and other toxicants. We examine mechanisms to ameliorate MP/NP-induced phytotoxicity, including the use of phytohormones, biochar, and other plant-growth regulators. We discuss the effects of MPs/NPs -induced phytotoxicity in terms of its ability to inhibit plant growth and photosynthesis, disrupt nutrient metabolism, inhibit seed germination, promote oxidative stress, alter the antioxidant defense system, and induce genotoxicity. This review summarizes the novel strategies for mitigating MPs/NPs phytotoxicity, presents recent advances, and highlights research gaps, providing a foundation for future studies aimed at overcoming the emerging problem of MPs/NPs phytotoxicity in edible crops.

Atmospheric deposition is an important pathway for inputting microplastics: Insight into the spatiotemporal distribution and deposition flux in a mega city

Microplastics (MPs) refer to plastic particles with a size less than 5 mm, which attracted widespread attention as an emerging pollutant. The monitoring of atmospheric microplastics (AMPs) in a megacity was carried out to study the characteristics and spatiotemporal distribution of AMPs, explore the sources and estimate the deposition flux. The results showed that the annual average abundance of AMPs in Wuhan was 82.85 ± 57.66 n·m-2·day-1. The spatiotemporal distribution characteristics of AMPs show that spring was the highest season, followed by autumn, winter, and summer; the city center was higher than the suburbs. Fiber was the main type of AMPs in Wuhan, followed by fragment, film and pellet. The proportion of AMPs were mainly small (<0.5 mm) and medium (0.5-1.0 mm). Transparent and white were the main colors of AMPs, followed by red, brown. A total of 10 types polymers were detected, polyethylene terephthalate (PET) was dominant. There are positive correlations between AMPs and SO2, NO2 in the atmosphere, indicating that they might be influenced by intense human activity. The polycyclic aromatic hydrocarbons (PAHs) and AMPs in spring showed an extremely significant positive correlation (p < 0.05). AMPs might mainly originate from the wear and tear shedding of textiles, the aging of agricultural films and plastic waste based on their polymer types and main uses. The potential geographical sources of AMPs were mainly the surrounding cities. The annual deposition flux of AMPs was about 308 tons if there were no remove processes, which highlighted the importance of atmospheric transport and deposition of MPs. The analysis of the abundance, morphological characteristics and sources of AMPs can provide data support and reference for mega-cities with high global population activities, or cities in global mid-latitude regions.

Occurrence and characteristics of microplastics pollution in tropical agricultural soils in Klang Valley, Malaysia

Presently, microplastic pollution has emerged as a growing environmental risk around the world. Nevertheless, knowledge of the occurrence and characteristics of microplastics in tropical agricultural soil is limited. This study investigated the pollution of surface soil microplastics in two agricultural farms located at Klang Valley, Malaysia. An extraction method based on density separation by using saturated extraction solution (sodium sulfate, ρ = 2 g cm-3 and sucrose, ρ = 1.59 g cm-3 with a ratio 1:1, v/v) was carried out. The study revealed the mean particle size of soil microplastics with 3260.76 ± 880.38 μm in farm A and 2822.31 ± 408.48 μm in farm B. The dominant types of soil microplastics were fragments and films with major colors of white (59%) and transparent (28%) in farm A, while black (52%) and white (37.6%) in farm B. Representatives of soil microplastics detected polymers of polyvinyl chloride (PVC), high density polyethylene (HDPE), polycarbonate (PC), and polystyrene (PS). The sources of plastic products were black and white plastic pipes, black plastic films for vegetation, fertilizer bottles, plastic water containers and polystyrene storage boxes, and the breakdown processes, contributed to the microplastic pollution in these farms. The outcomes of this study will establish a better understanding of microplastic pollution in tropical agricultural soil in the Southeast Asian region. The findings would be beneficial as supportive reference for the endeavor to reduce microplastic pollution in agricultural soil.

Microbial metabolism influences microplastic perturbation of dissolved organic matter in agricultural soils

An estimated 258 million tons of plastic enter the soil annually. Joining persistent types of microplastic (MP), there will be an increasing demand for biodegradable plastics. There are still many unknowns about plastic pollution by either type, and one large gap is the fate and composition of dissolved organic matter (DOM) released from MPs as well as how they interact with soil microbiomes in agricultural systems. In this study, polyethylene MPs, photoaged to different degrees, and virgin polylactic acid MPs were added to agricultural soil at different levels and incubated for 100 days to address this knowledge gap. We find that, upon MP addition, labile components of low aromaticity were degraded and transformed, resulting in increased aromaticity and oxidation degree, reduced molecular diversity, and changed nitrogen and sulfur contents of soil DOM. Terephthalate, acetate, oxalate, and L-lactate in DOM released by polylactic acid MPs and 4-nitrophenol, propanoate, and nitrate in DOM released by polyethylene MPs were the major molecules available to the soil microbiomes. The bacteria involved in the metabolism of DOM released by MPs are mainly concentrated in Proteobacteria, Actinobacteriota, and Bacteroidota, and fungi are mainly in Ascomycota and Basidiomycota. Our study provides an in-depth understanding of the microbial transformation of DOM released by MPs and its effects of DOM evolution in agricultural soils.

Transport of polystyrene nanoplastics with different functional groups in goethite-coated saturated porous media: Effects of low molecular weight organic acids and physicochemical properties

The influence of low molecular weight organic acids (LMWOAs) and goethite on the migration of nanoplastics in the soil environment remains poorly understood. To elucidate the mechanism of influence, the study investigated the impact of LMWOAs on the migration ability of functionalized polystyrene nanoplastics (PSNPs-NH2/COOH) in quartz sand (QS) and goethite (α-FeOOH)-coated quartz sand (FOS). We investigated the effect of changes in iron valence induced by LMWOAs on the migration of PSNPs. The results revealed that the migration ability of polystyrene nanoplastics (PSNPs) declined as the ionic strength (IS) increased and the pH decreased, primarily due to the compression of the double layer and protonation reactions. The migration of PSNPs is facilitated by LMWOAs through distinct mechanisms in the two media. Specifically, LMWOAs were adsorbed on the FOS and QS surfaces through complexation and hydrogen bonding, respectively. At pH 4.0, LMWOAs exhibit redox activity, resulting in the generation of additional Fe(III). This redox process enhances the electrostatic attraction between the media and PSNPs, thereby reducing the competition at specific points and spatial resistance associated with LMWOAs. In contrast to FOS, LMWOAs at pH 4.0 reduced the migration ability of PSNPs in QS, following the trend of MA > TA > CA. This difference was attributed to the pKa of LMWOAs and the weak hydrogen bonding on the QS surface. The relevant mathematical models effectively validate the migration results. The above conclusions suggest that LMWOAs can alter the valence state of iron on the surface of goethite, thereby influencing the migration of plastic particles in environmental media.

Microplastics enhance nitrogen loss from a black paddy soil by shifting nitrate reduction from DNRA to denitrification and Anammox

Microplastics (MPs) are frequently detected emerging pollutants in soil that can endanger farmland ecosystems; however, little is known about their impacts on dissimilatory nitrate reduction processes in paddy soil. Here, using the 15N-tracer and microbial molecular techniques, we investigated the effects of MPs (200-400 μm) made of polystyrene (PS), polyvinyl chloride (PVC), and polyethylene (PE) on denitrification, anaerobic ammonium oxidation (Anammox), and dissimilatory nitrate reduction to ammonium (DNRA) and the associated microbial community in a black paddy soil. All MPs increased the Anammox rate by 6.6 %-745 % and decreased the DNRA rate by 15.1 %-74.2 %, while MPs of PS and PE significantly increased the denitrification rate by 79.3 %-102.3 % and 34.8 %-62.1 %, respectively. The MPs promoted the partitioning of NO3- towards denitrification and Anammox while inhibiting DNRA, as suggested by the decreased relative contributions of DNRA from 24.1 % to 5.4 %-14.2 % following MPs amendment. This was attributed to the increased denitrification gene abundance and the enriched specific denitrifier taxa, as well as the decreased DNRA gene abundance. Our findings suggest that the stimulated denitrification and Anammox by MPs, accompanied by the suppression of DNRA, may lead to substantial nitrogen loss in paddy fields, underscoring the need to further evaluate the environmental behaviors of MPs in agricultural ecosystems.

Spatio-temporal variation of soil microplastics as emerging pollutant after long-term application of plastic mulching and organic compost in apple orchards

Microplastics (MPs) pollution in agroecosystems have aroused great alarm and widespread concern. However, the spatial distribution and temporal variation characteristics of MPs in apple orchards with long-term plastic mulching and organic compost input are still poorly understood. This study investigated MPs accumulation characteristics and vertical distribution after applying plastic mulch and organic compost in apple orchards for 3 (AO-3), 9 (AO-9), 17 (AO-17), and 26 (AO-26) years on the Loess Plateau. The clear tillage (no plastic mulching and organic composts) area was used as a control (CK). At a soil depth of 0-40 cm, AO-3, AO-9, AO-17, and AO-26 treatments increased the abundances of MPs, and the black fibers and fragments of rayon and polypropylene were dominant. In the 0-20 cm soil layer, the abundances of MPs increased with the treatment time; the abundance was 4333 pieces kg^-1 after 26 years of treatment, gradually decreasing with soil depth. In different treatments and soil layers, the percentages of MPs <1000 μm were dominant (>50%). The AO-17 and AO-26 treatments significantly increased the MPs with the size of 0-500 μm at 0-40 cm and the abundances of pellets in 0-60 cm soil. In conclusion, the long-term (≥17 years) application of plastic mulching and organic composts increased the abundances of small particles at 0-40 cm, and plastic mulching contributed the most to MPs, while organic composts increased the complexity and diversity of MPs.

A Low-Cost Approach for Batch Separation, Identification and Quantification of Microplastics in Agriculture Soil

An increasing trend of research on microplastics (MPs) pollution in soil requires plenty of accurate data on MPs occurrence in soil samples. Efficient and economical methods of obtaining MP data are in development, especially for film MPs. We focused on MPs originating from agricultural mulching films (AMF) and presented an approach that can separate MPs in batches and identify them quickly. It mainly includes separation by ultrasonic cleaning and centrifugation, digestion of organic matter, and an AMF-MPs identification model. Adding olive oil or n-hexane to saturated sodium chloride constituted the best combination of separation solutions. Controlled experiments proved that the optimized methods improved the efficiency of this approach. The AMF-MPs identification model provides specific characteristics of MPs and can identify MPs efficiently. Evaluation results showed that the mean MP recovery rate reached 95%. The practical application demonstrated that this approach could conduct MPs analysis in soil samples in batches with less time and low cost.

From natural environment to animal tissues: A review of microplastics(nanoplastics) translocation and hazards studies

Microplastics (MPs) and nanoplastic (NPs) pollution is a global concern due to the massive use of plastic products. Although there have been many studies on the treatments of animals with MPs/NPs, there are few systematic summaries of MPs/NPs translocation and hazards in animals. This review comprehensively summarizes the pathways by which animals are exposed to MPs/NPs in the environment, in particular, to summarize in detail their translocation and hazards in vivo. Studies have shown that MPs/NPs enter the animals' body through water, food, breath and even skin, enter the blood circulation through the lungs and digestive tract, and eventually accumulate in various tissues. After a summary of the studies, we found a high correlation between the tissue accumulation of MPs/NPs and their particle size, with 4-20 μm MPs appearing to be more prone to accumulate in tissues. These MPs/NPs accumulated in animal tissues may be transferred to humans through the food chain. Thus, we summarized the studies on the accumulation of MPs/NPs in livestock and poultry products, showing that MPs/NPs in livestock and poultry products gradually increased with the complexity of processing and packaging processes. There are few reports related to direct contamination of livestock products by MPs/NPs, we hope that this review will bring together the growing body of evidence that MPs/NPs can directly harm human health through the food chain.

Microplastics addition reduced the toxicity and uptake of cadmium to Brassica chinensis L

The coexistence of microplastics (MPs) and toxic metal contaminants in soils is becoming increasingly common, thereby posing serious threat to soil-plant systems. Cadmium (Cd) is the most common metal contaminant in soil and can easily combine with MPs, thereby altering its bioavailability. However, few studies have focused on the co-pollution of MPs and Cd, particularly the complex phytotoxicity caused by their interaction and the effect of co-exposure on Cd uptake in plants. We conducted pot experiments to compare the effects of exposure to polystyrene (PS) and Cd, as well as the effects of co-exposure (PS + Cd), on the physiological characteristics of Brassica chinensis L. and explored the regulatory factors of MPs on Cd uptake in plant tissues. The results showed that plant biomass, photosynthetic parameters, and chlorophyll content significantly decreased (p < 0.05) with increasing PS doses under treatment with MPs alone. Although the negative effects of PS and Cd co-exposure on plants were higher than those of PS alone, however, the addition of MPs reduced the toxicity effects of Cd on plants and decreased the uptake and accumulation of Cd by plants compared with the Cd treatment alone. Furthermore, plants can resist the increased malondialdehyde content and oxidative stress induced by PS and Cd exposure by increasing the activities of superoxide dismutase and peroxidase. Under the PS + Cd treatment, linear models showed that soil organic carbon and sucrase activity were the key variables affecting Cd uptake by plant shoots and roots, respectively. The results of the partial least squares path modeling further showed that PS indirectly affected Cd uptake by B. chinensis by significantly affecting the physicochemical properties of soil, Cd concentration, and enzyme activity. Our results provide a new perspective and an important reference for further understanding the effects of MPs on the bioavailability and fate of heavy metals.

A critical review on interaction of microplastics with organic contaminants in soil and their ecological risks on soil organisms

The pollution of microplastics (MPs) in soil has become a global environmental problem. Due to high sorption capacity and persistence in environment, the MPs exhibit combined effects with organic pollutants in soil, thereby posing a potential risk to soil ecology and human health. However, limited reviews are available on this subject. Therefore, in response to this issue, this review provides an in-depth account of interaction of MPs with organic contaminants in soil and the combined risks to soil environment. The sorption of organic contaminants onto MPs is mainly through hydrophobic and π-π interactions, hydrogen bonding, pore filling and electrostatic and van der Waals forces. The intrinsic characteristics of MPs, organic contaminants and soil are the key factors influencing the sorption of organic pollutants onto MPs. Importantly, the presence of MPs changes the sorption, degradation and transport behaviors of organic contaminants in soil, and affects the toxic effects of organic contaminants on soil organisms including animals, plants and soil microorganisms through synergistic or antagonistic effects. Source control, policy implementation and plastic removal are the main preventive and control measures to reduce soil MPs pollution. Finally, priorities for future research are proposed, such as field investigations of co-pollution, contribution of plastisphere to organic contaminant degradation, and mechanisms of MPs effects on organic contaminant toxicity.

Food and human safety: the impact of microplastics

Plastic waste pollution is one of the biggest problems in the world today. The amount of plastic in the environment continues to increase, and human exposure to microplastic (MP) has become a reality. This subject has attracted the attention of the whole world. The MP problem has also been noticed by the scientific community. The term microplastic is mostly used to define synthetic material with a high polymer content that can have a size range from 0.1 to 5000 µm. This paper aims to characterize the routes of exposure to MP, define its pollution sources, and identify food types contaminated with plastics. This review addresses the current state of knowledge on this type of particles, with particular emphasis on their influence on human health. Adverse effects of MP depend on routes and sources of exposure. The most common route of exposure is believed to be the gastrointestinal tract. Sources of MP include fish, shellfish, water as well as tea, beer, wine, energy drinks, soft drinks, milk, salt, sugar, honey, poultry meat, fruits, and vegetables. Studies have shown that particles of PET, PE, PP, PS, PVC, PA, and PC are the most frequently found in food.