Advancements in heavy metals removal from effluents employing nano-adsorbents: Way towards cleaner production

Determination of metal-biomolecule interactions by relative mobility shift partial filling affinity capillary electrophoresis

Metal ions and their interactions with biomolecules play an important role in human health. However, optical detectors commonly used for HPCE cannot directly detect metal ions without UV absorption. To make up for the shortcomings of existing HPCE detectors, a new universal HPCE detection system called an interface-induced current detector (IICRD) was constructed previously, with no need for derivatization procedures or complex instrumental modifications. Meanwhile, most of the reported studies on metal-biomolecule interactions only focused on the detection and analysis of biomolecules, commonly causing inaccurate or false-negative results, which is yet to be resolved. Here, the application of HPCE-IICRD realized the determination of metal-biomolecule interactions by directly measuring the electrophoretic parameters of metal ions for the first time, indicating that the interaction intensity can be measured more directly and accurately. Furthermore, an improved affinity capillary electrophoresis (ACE) method called relative mobility shift partial filling ACE-IICRD (rmsPF-ACE-IICRD) was originally developed to quantitatively analyze the binding strength. Binding behaviors between twelve free metal ions and three types of biomolecules (including two blood proteins, two enzyme proteins and two native DNAs) were investigated, and the values of the equilibrium dissociation constant (KD) of metal-biomolecule complexes were calculated and evaluated by the nonlinear chromatography (NLC) method. The experimental results were basically consistent with the literature values. In particular, heavy metal ions showed stronger interactions with proteins and enzymes, while metal ions tended to show stronger binding with native DNAs than proteins and enzymes, which were in agreement with literature results. The combined use of HPCE-IICRD and rmsPF-ACE showed great advantages such as no need for pretreatment, low operating cost, good repeatability, simple operation and no interference from coexisting substances, which is hopeful to become an efficient metal ion detection method and also to expand the application scope of IICRD in the future.

Investigation of Eucalyptus camaldulensis and Tamarix aphylla species' capacities for methylene blue removal in wastewater and heavy metal remediation in soil

In the contemporary landscape, the reuse of wastewater holds paramount significance. Concurrently, wastewater carries an array of pollutants encompassing chemical dyes and heavy metals. This study delves into the potential of Tamarix aphylla (TA) and Eucalyptus camaldulensis (EC) species for mitigating heavy metals in soil and eliminating methylene blue dye (MB) from wastewater. The research begins with assessing the dye adsorption process, considering pivotal factors such as initial pH, adsorbent dosage, initial dye concentration, and contact time. Outcomes reveal EC's superiority in dye removal compared to TA. As a bioremediation agent, EC exhibits a 90.46% removal efficacy for MB within 15 min, with pH 7.0 as the operative condition. Equilibrium analysis employs Temkin (T), Freundlich (F), and Langmuir (L) isotherms, revealing an excellent fit with the L isotherm model. The study delves further by probing surface adsorption kinetics through pseudo-first-order (PFO) and pseudo-second-order (PSO) models. Furthermore, to discern the divergent impacts of EC and TA on soil heavy metal reduction, soil samples were collected from three distinct zones: an untouched control area, alongside areas where EC and TA were cultivated at the Yazd wastewater site in Iran. Heavy metal levels in the soil were meticulously assessed through rigorous measurement and statistical scrutiny. The findings spotlight TA-cultivated soil as having the highest levels across all examined factors. Ultimately, EC emerges as the superior contender, proficiently excelling in both MB eliminations from wastewater and heavy metal amelioration in the soil, positioning it as the preferred phytoremediation agent.

Mesoporous Magnetic/Polymer Hybrid Nanoabsorbent for Rapid and Efficient Removal of Heavy Metal Ions from Wastewater

As an advanced water purification technology, magnetic nanoabsorbents are highly attractive for their sustainability, robustness, and energy efficiency. However, magnetic responsiveness and high adsorptive capacity are irreconcilable during the design and synthesis of a high-performance magnetic nanoabsorbent. Here, we address this issue by designing a kind of mesoporous magnetic polymer hybrid microspheres, where functional polymers such as polyrhodanine and polypyrrole were attached to the pore walls in the interior of mesoporous Fe3O4 microspheres through in situ polymerization. Due to the integrated large saturation magnetic moment, porous structure, and dense polymer layer, the mesoporous magnetic polymer hybrid microspheres demonstrated fast magnetic responsiveness, excellent recycling performance, and high adsorption capacities toward Pb(II) ions (189 mg g-1) for polyrhodanine and Cr(VI) ions (199 mg g-1) for polypyrrole. Furthermore, their potential application in wastewater treatment was verified by a self-made magnetic separation column, where the designed magnetic nanoabsorbent exhibits significant advantages including rapid separation of heavy metal ions and high outflow. This study provided a promising magnetic polymer hybrid nanoabsorbent for realizing efficient removal of heavy metal ions from wastewater.

Nano carbon-modified air purification filters for removal and detection of particulate matters from ambient air

Particulate matters (PMs) pose significant risks to human health and the environment, necessitating research to enhance air purification filters and reduce harmful emissions. This study focuses on the preparation of carbon nanomaterials, including graphitic carbon nitride nanosheets (g-C3N4 NSs), reduced graphene oxide (r-GO), and carbon nanotubes (CNT), for modifying filters in air particle monitoring devices. The objective is to investigate the impact of these nanomaterials on enhancing PM adsorption efficiency. Quantitative and qualitative analyses of the modified filters' adsorption efficiency towards PMs are performed using spectroscopic techniques such as Energy-Dispersive X-ray Spectroscopy (EDX), Inductively Coupled Plasma (ICP), and Laser-Induced Breakdown Spectroscopy (LIBS). The results reveal that CNT-modified filters exhibit superior adsorption efficiency compared to the control, g-C3N4, and r-GO-modified filters. The exceptional performance of CNTs is attributed to their large specific surface area and pore volume. Additionally, LIBS demonstrates its capability to detect heavy metals like Cd, which remain undetected by EDX and ICP. The technique proves sensitive for heavy metal monitoring. This novel approach is expected to garner significant attention and contribute to the development of improved air purification technologies.

Bio-Based Aerogels for the Removal of Heavy Metal Ions and Oils from Water: Novel Solutions for Environmental Remediation

Contamination of the aqueous environment caused by the presence of heavy metal ions and oils is a growing concern that must be addressed to reduce their detrimental impact on living organisms and safeguard the environment. Recent efficient and environmentally friendly remediation methods for the treatment of water are based on third-generation bioaerogels as emerging applications for the removal of heavy metal ions and oils from aqueous systems. The peculiarities of these materials are various, considering their high specific surface area and low density, together with a highly porous three-dimensional structure and tunable surface chemistry. This review illustrates the recent progress in aerogels developed from cellulose and chitosan as emerging materials in water treatment. The potential of aerogel-based adsorbents for wastewater treatment is reported in terms of adsorption efficacy and reusability. Despite various gaps affecting the manufacturing and production costs of aerogels that actually limit their successful implementation in the market, the research progress suggests that bio-based aerogels are ready to be used in water-treatment applications in the near future.

Fabrication of Polyamide6/Polyaniline as an Effective Nano-web Membrane for Removal of Cr (VI) from Water and a Black Box Approach in Modeling of Adsorption Process

Chromium (Cr), as a highly toxic heavy metal ion, is still a severe environmental issue, although many research efforts have been put into its removal from water. Polyaniline (PANI), as a conductive polymer, demonstrated great capability in heavy metal adsorption due to its low cost, ease of synthesis, reversible redox behavior, and chemical stability. However, using PANI powder alone in heavy metal removal causes secondary pollution and aggregation in water. The PANI coating on a substrate could tackle this problem. In this study, polyaniline-coated polyamide6 (PA6/PANI) nano-web membrane was used for the removal of Cr(VI) in both adsorption and filtration-adsorption modes. The PA6/PANI nano-web membrane was fabricated via PA6 electrospinning followed by in-situ polymerization of the aniline monomer. The electrospinning condition of PA6 was optimized by the Taguchi method. The PA6/PANI nano-web membrane was characterized by FESEM, N2-adsorption/desorption, FT-IR, contact angle measurement, and tensile test. FT-IR and FESEM results demonstrated the successful synthesis of PA6/PANI nano-web and PANI homogeneous coating on PA6 nanofibers, respectively. The N2 adsorption/desorption results indicated that the pore volume of the PA6/PANI nano-web decreased by 39% compared to PA6 nanofibers. The tensile test and water contact angle studies showed that the coating of PANI on PA6 nanofibers improves the mechanical properties and hydrophilicity of PA6 by 10% and 25%, respectively. The application of PA6/PANI nano-web in the removal of Cr(VI) in batch and filtration modes exhibits excellent removal of 98.4 and 86.7%, respectively. A pseudo first order model well described the adsorption kinetics, and the adsorption isotherm was best fitted by the Langmuir model. A black box modeling approach based on artificial neural networks (ANN) was developed to predict the removal efficiency of the membrane. The superior performance of PA6/PANI in both adsorption and filtration-adsorption systems makes it a potential candidate for the removal of heavy metals from water on an industrial scale.

A novel, efficient and economical alternative for the removal of toxic organic, inorganic and pathogenic water pollutants using GO-modified PU granular composite

Multicomponent wastewater treatment utilising simple and cost-effective materials and methods is an important research topic. This study has reported the fabrication and utilisation of graphene oxide (GO) embedded granular Polyurethane (PU) (GOPU) adsorbent for the treatment of lead ion (Lead ion (Pb(II)), Methylene blue (MB), and E. coli. PU granules were wrapped with GO flakes to improve hydrophilicity, interaction with polluted water, cation-exchange reaction, and binding of pollutants on its surface. Synthesised GOPU granules were characterised by X-Ray Diffraction (XRD), Raman, Fourier transform infrared (FTIR) spectroscopy, and Scanning electron microscopy (SEM) analysis to ensure the successful synthesis of GO and fabrication of GOPU granules. Further, batch and continuous adsorption processes were studied in different operating conditions to evaluate the performance of GOPU granules in practical applications. The kinetic and isotherm analyses revealed that the adsorption of Lead (Pb(II)) ion and Methylene Blue (MB) dye followed the Freundlich and Langmuir isotherm models, respectively, and they showed good agreement with the Pseudo-second-order kinetic model. The adsorption capacities of GOPU granules for the elimination of Pb(II) and MB dye were about 842 mg/g and 899 mg/g, respectively. Additionally, investigations into the fixed bed column revealed that the adsorption column performed best at a flow rate of 5 mL/min and a bed height of 6 cm. Pb(II) adsorption had a bed uptake capacity (q_bed) of 88 mg/g and percentage removal efficiency (%R) of 76%. Similarly, MB adsorption had a bed uptake capacity of 202 mg/g and a percentage removal efficiency of 71%. A systematic invention on antibacterial activity toward E. coli showed that The GOPU granules have a removal efficiency of about 100% at an exposure of 24 h. These findings indicated the possible use of GOPU granules as promising adsorbents for various water pollutants.

Evaluation of heavy metals contamination in cereals, vegetables and fruits with probabilistic health hazard in a highly polluted megacity

Heavy metals (HMs) contamination in foodstuffs could pose serious health issues for public health and humans are continually exposed to HMs through the consumption of cereals, fruits, and vegetables. The present study was conducted to assess 11 HMs in foodstuffs to investigate pollution levels and health risks to children and adults. The mean contents of Cd, Cr, Cu, Ni, Zn, Fe, Pb, Co, As, Mn and Ba in foodstuffs were 0.69, 2.73, 10.56, 6.60, 14.50, 9.63, 2.75, 0.50, 0.94, 15.39 and 0.43 mg/kg, respectively and the concentration of Cd, Cr, Cu, Ni and Pb were higher than maximum permissible concentrations (MPCs) showing that these foods may be contaminated with metals and constitute a danger to consumers. Vegetables had relatively higher metal contents followed by cereals and fruits. The average value of the Nemerrow composite pollution index (NCPI) for cereals, fruits, and vegetables were 3.99, 6.53, and 11.34, respectively indicating cereal and fruits were moderately contaminated whereas vegetables were heavily contaminated by the studied metals. The total estimated daily and weekly intakes for all studied metals were higher than the maximum tolerable daily intake (MTDI) and provisional tolerance weekly intake (PTWI) recommended by FAO/WHO. The target hazard quotients and hazard index of all studied metals exceeded the standard limit for adults and children suggesting significant non-carcinogenic health hazards. The total cancer risk value of Cd, Cr, Ni, Pb, and As from food intake exceeded the threshold range (1.0E-04), suggesting potential carcinogenic risks. Based on practical and sensible evaluation techniques, the current work will assist policymakers in controlling metal contamination in foodstuffs.

Designing Highly Photoactive Hybrid Aerogels for In-Flow Photocatalytic Contaminant Removal Using Silica-Coated Bacterial Nanocellulose Supports

This study explores the use of silica-coated bacterial nanocellulose (BC) scaffolds with bulk macroscopic yet nanometric internal pores/structures as functional supports for high surface area titania aerogel photocatalysts to design flexible, self-standing, porous, and recyclable BC@SiO₂-TiO₂ hybrid organic-inorganic aerogel membranes for effective in-flow photo-assisted removal of organic pollutants. The hybrid aerogels were prepared by sequential sol-gel deposition of the SiO₂ layer over BC, followed by coating of the resulting BC@SiO₂ membranes with a porous titania aerogel overlayer of high surface area using epoxide-driven gelation, hydrothermal crystallization, and subsequent supercritical drying. The silica interlayer between the nanocellulose biopolymer scaffold and the titania photocatalyst was found to greatly influence the structure and composition, particularly the TiO₂ loading, of the prepared hybrid aerogel membranes, allowing the development of photochemically stable aerogel materials with increased surface area/pore volume and higher photocatalytic activity. The optimized BC@SiO₂-TiO₂ hybrid aerogel showed up to 12 times faster in-flow photocatalytic removal of methylene blue dye from aqueous solution in comparison with bare BC/TiO₂ aerogels and outperformed most of the supported-titania materials reported earlier. Moreover, the developed hybrid aerogels were successfully employed to remove sertraline drug, a model emergent contaminant, from aqueous solution, thus further demonstrating their potential for water purification.

Preparation of Nanocellulose-Based Aerogel and Its Research Progress in Wastewater Treatment

Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.

Recent Application Prospects of Chitosan Based Composites for the Metal Contaminants Wastewater Treatment

Heavy metals, known for their toxic nature and ability to accumulate and magnify in the food chain, are a major environmental concern. The use of environmentally friendly adsorbents, such as chitosan (CS)—a biodegradable cationic polysaccharide, has gained attention for removing heavy metals from water. This review discusses the physicochemical properties of CS and its composites and nanocomposites and their potential application in wastewater treatment.

Evaluation the feasibility of using clinoptilolite as a gravel pack in water wells for removal of lead from contaminated groundwater

The ability of clinoptilolite zeolite as a filter in water wells to remove lead from polluted groundwater was tested in batch and fixed-bed column experiments. XRF, XRD, SEM, and BET were used to characterize the zeolite. Because of the pH variation in groundwater, batch experiments were performed at pH = 6, 7, and 8, with the highest removal efficiency (84.2%) at pH = 6 and 298 K within 90 min. The Freundlich model accurately predicted metal ion adsorption behavior and indicated a multilayer adsorption of Pb(II) molecules on the inhomogeneous surface of clinoptilolite. The best-fitting kinetic model for clinoptilolite is the pseudo-second order equation, highlighting that the rate of adsorption is dependent on absorbent capacity. Next, the effect of flow rate, bed depth, and grain size of clinoptilolite on lead removal was investigated in column experiments at an initial concentration of 450 mg pb/L. The highest removal efficiency was achieved in column experiments with a flow rate of 1 mL/min, a bed height of 10 cm, and a grain size of 0.6 to 0.8 mm. Breakthrough curves were predicted by the Thomas and Yoon-Nelson models, with excellent agreement with the corresponding experimental data. This research will be used to develop a new in situ remedial approach for removing lead from polluted groundwater.

Chitosan-Modified Biochars to Advance Research on Heavy Metal Ion Removal: Roles, Mechanism and Perspectives

The chitosan-modified biochars BC-CS 1-1, BC-CS 2-1 and BC-CS 4-1 were subjected to the synthetic application of biochar from agriculture waste and chitosan for the adsorption of Cu(II), Cd(II), Zn(II), Co(II) and Pb(II) ions from aqueous media. The results displayed a heterogeneous, well-developed surface. Additionally, the surface functional groups carboxyl, hydroxyl and phenol, determining the sorption mechanism and confirming the thermal stability of the materials, were present. The sorption evaluation was carried out as a function of the sorbent dose, pH, phase contact time, initial concentration of the solution and temperature. The maximum value of q_t for Pb(II)-BC-CS 4-1, 32.23 mg/g (C₀ 200 mg/L, mass 0.1 g, pH 5, 360 min), was identified. Nitric acid was applied for the sorbent regeneration with a yield of 99.13% for Pb(II)-BC-CS 2-1. The produced sorbents can be used for the decontamination of water by means of the cost-effective and high-performance method.

Novel hollow α-Fe2O3 nanofibers with robust performance enabled multi-functional applications

The synthetic strategies of achieving low-cost and high-performance nanofibers are of great significance in the field of catalysis and detection. In this work, a series of electrospun α-Fe₂O₃ nanofibers with hollow structure were prepared via combination technology of electrospinning, hydrothermal synthesis, and controlled calcination process. Especially, the influences of the crystal structure and morphology on the comprehensive properties of nanofibers have been explored in detail. The results indicated that α-Fe₂O₃ nanofibers could be obtained via the calcination at 600-800 °C. Rice-like α-Fe₂O₃ particles were observed to assemble a stable exoskeleton, supporting a robust tubular cavity. And this tubular structure turned gradually into groove-like structure as the calcination temperature increased, accompanied by tunable crystallization, specific surface area and magnetic property. Finally, combined with series of validation tests, including dye decolorization, electrochemical detection of trace cadmium ions and Fenton degradation of polyvinyl alcohol, the resultant α-Fe₂O₃ nanofibers have been demonstrated to show the potential application prospects.

Synthesis of Functionalized Carboxylated Graphene Oxide for the Remediation of Pb and Cr Contaminated Water

With the growing scarcity of water, the remediation of water polluted with heavy metals is the need of hour. The present research work is aimed to address this problem by adsorbing heavy metals ions (Pb (II) and Cr (VI)) on modified graphene oxide having an excess of carboxylic acid groups. For this, graphene oxide (GO) was modified with chloroacetic acid to produce carboxylated graphene oxide (GO-COOH). The successful synthesis of graphene oxide and its modification has been confirmed using Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX) and Transmission electron microscopy (TEM). The increase in surface area of graphene oxide after treatment with chloroacetic acid characterized by BET indicated its successful modification. A batch experiment was conducted to optimize the different factors affecting adsorption of both heavy metals on GO-COOH. After functionalization, we achieved maximum adsorption capacities of 588.23 mg g^-1 and 370.37 mg g^-1 for Pb and Cr, respectively, by GO-COOH which were high compared to the previously reported adsorbents of this kind. The Langmuir model (R² = 0.998) and Pseudo-second-order kinetic model (R² = 0.999) confirmed the monolayer adsorption of Pb and Cr on GO-COOH and the chemisorption as the dominant process governing adsorption mechanism. The present work shows that the carboxylation of GO can enhance its adsorption capacity efficiently and may be applicable for the treatment of wastewater.

Fabrication of Novel Agrowaste (Banana and Potato Peels)-Based Biochar/TiO2 Nanocomposite for Adsorption of Cr(VI), Statistical Optimization via RSM Approach

In this research work, a simple, efficient, and eco-friendly procedure for the biosorption of Cr(VI) ions was studied. A detailed comparative study was performed to check the adsorption efficiency of agrowaste (banana and potato peels)-based adsorbents. Firstly, mixed biosorbent was washed, dried and ground into powder, secondly, biosorbent was pyrolyzed into biochar and thirdly TiO2 nanocomposite (TiO2 NC) biosorbent was made by sonicating using prepared biochar and TiO2 NPs. Titanium dioxide nanoparticles (TiO2 NPs) were synthesized by a green method using Psidium guajava leaf extract. The synthesized adsorbents were characterized by SEM, EDX FT-IR, XRD and UV-visible analysis. The effect of four different factors, i.e., pH of the synthetic metallic solution, time, concentration and adsorbent dosage was studied. The optimum conditions were time (120 min), pH (3), concentration (10 ppm) and adsorbent dosage (1.0 g). The kinetic modeling showed that the adsorption of Cr(VI) ion follows a pseudo second-order mechanism and the Langmuir isotherm model was found to fit better for this study. Response surface methodology (RSM)-based optimized parameters provided optimal parameter sets that better represent the adsorption rate models. The uptake capacity of Cr(VI) from aqueous solution was found to be biomass (76.49 mg/L) ˂ biochar (86.51 mg/L) ˂ TiO2 NC (92.89 mg/L). It can be suggested that the produced TiO2 NC could possibly be an efficient biosorbent for the removal of Cr(IV).

Green Nanoparticle-Aided Biosorption of Nickel Ions Using Four Dry Residual Biomasses: A Comparative Study

The green synthesis of titanium dioxide nanoparticles was performed using the sol-gel method for their use in the modification of several agricultural biomasses (orange, lemon, cassava and yam peels) to evaluate the enhancement of adsorption capacity. To this end, different particle sizes (0.355, 0.5 and 1.0 mm) and initial solution pHs (2, 4 and 6) were assessed to identify the optimum conditions for further experimentation with the selected lignocellulosic materials. The defined conditions reporting the highest removal yields were used to perform adsorption experiments for chemically modified biosorbents. The biomaterials were characterized via elemental and bromatological analysis in order to quantify their composition. After the incorporation of TiO2 nanoparticles, the resulting biosorbents were characterized via FT-IR and SEM techniques. The results revealed that the pH solution significantly affects the nickel ion uptake, reaching the best performance at pH = 6 for all biomasses. Unmodified biomasses shown adsorption capacities between 18–20 mg/g. For chemically modified with TiO2 orange peels and yam peels biomass, the increase in adsorption capacities was 21.3 and 18.01 mg/g, respectively. For cassava and lemon peels chemically modified, it was found the increasing in adsorption capacities with values of 21.3 and 18.01 mg/g, respectively, which suggested that the incorporation of nanoparticles enhances adsorption capacities.

Carbon-based catalyst for environmental bioremediation and sustainability: Updates and perspectives on techno-economics and life cycle assessment

Global rise in the generation of waste has caused an enormous environmental concern and waste management problem. The untreated carbon rich waste serves as a breeding ground for pathogens and thus strategies for production of carbon rich biochar from waste by employing different thermochemical routes namely hydrothermal carbonization, hydrothermal liquefaction and pyrolysis has been of interest by researchers globally. Biochar has been globally produced due to its diverse applications from environmental bioremediation to energy storage. Also, several factors affect the production of biochar including feedstock/biomass type, moisture content, heating rate, and temperature. Recently the application of biochar has increased tremendously owing to the cost effectiveness and eco-friendly nature. Thus this communication summarized and highlights the preferred feedstock for optimized biochar yield along with the factor influencing the production. This review provides a close view on biochar activation approaches and synthesis techniques. The application of biochar in environmental remediation, composting, as a catalyst, and in energy storage has been reviewed. These informative findings were supported with an overview of lifecycle and techno-economical assessments in the production of these carbon based catalysts. Integrated closed loop approaches towards biochar generation with lesser/zero landfill waste for safeguarding the environment has also been discussed. Lastly the research gaps were identified and the future perspectives have been elucidated.

Microbial electrolysis: a promising approach for treatment and resource recovery from industrial wastewater

Wastewater is one of the most common by-products of almost every industrial process. Treatment of wastewater alone, before disposal, necessitates an excess of energy. Environmental concerns over the use of fossil fuels as a source of energy have prompted a surge in demand for alternative energy sources and the development of sophisticated procedures to extract energy from unconventional sources. Treatment of municipal and industrial wastewater alone accounts for about 3% of global electricity use while the amount of energy embedded in the waste is at least 2–4 times greater than the energy required to treat the same effluent. The microbial electrolysis cell (MEC) is one of the most efficient technologies for waste-to-product conversion that uses electrochemically active bacteria to convert organic matter into hydrogen or a variety of by-products without polluting the environment. This paper highlights existing obstacles and future potential in the integration of Microbial Electrolysis Cell with other processes like anaerobic digestion coupled system, anaerobic membrane bioreactor and thermoelectric micro converter.

Invasive plants as biosorbents for environmental remediation: a review

Water contamination is an environmental burden for the next generations, calling for advanced methods such as adsorption to remove pollutants. For instance, unwanted biowaste and invasive plants can be converted into biosorbents for environmental remediation. This would partly solve the negative effects of invasive plants, estimated at 120 billion dollars in the USA. Here we review the distribution, impact, and use of invasive plants for water treatment, with emphasis on the preparation of biosorbents and removal of pollutants such as cadmium, lead, copper, zinc, nickel, mercury, chromate, synthetic dyes, and fossil fuels. Those biosorbents can remove 90-99% heavy metals from aqueous solutions. High adsorption capacities of 476.190 mg/g for synthetic dyes and 211 g/g for diesel oils have been observed. We also discuss the regeneration of these biosorbents.