Photocatalytic degradation of four emerging antibiotic contaminants and toxicity assessment in wastewater: A comprehensive study

Photocatalytic degradation of veterinary antibiotics in wastewaters: A review

The extensive use of veterinary antibiotics worldwide has led to their increasing accumulation in aquatic environments, adversely affecting both ecosystems and human health and leading to the emergence of antibiotic-resistant bacteria. Antibiotic residues enter water bodies primarily through wastewater effluent discharge, agricultural runoff, and improper disposal of pharmaceuticals. Several emerging technologies have been developed in response to the challenge of antibiotic contamination in wastewater. Among these, advanced oxidation processes (AOPs), including photocatalysis, have demonstrated significant potential for antibiotic degradation. Photocatalysis relies on the production of powerful oxidants to degrade pollutants under simulated or solar-light irradiation. Apart from the well-known TiO2, various photocatalytic materials have been used with metal oxides on the frontline. In this context, metal doping has been used to reduce the bandgap energy and enhance the absorption of visible light and charge-carrier separation. Doping with non-metals and carbon-based materials is another attractive alternative that promotes better degradation efficiency and suppresses recombination. Moreover, advanced designs, such as heterojunction constructions, have been developed for effective charge separation and wider utilization of the light spectrum. This comprehensive review summarizes recent advances in the design, characterization, efficiency, and mechanisms of various photocatalysts for degrading veterinary antibiotics in wastewater, along with toxicity assessments of the resulting transformation products. By examining these parameters, the current body of knowledge is consolidated, providing valuable insights into wastewater purification processes for effective antibiotic removal. Finally, by emphasizing the critical environmental importance of streamlined photocatalysis and the challenges associated with scaling up the process, this review highlights its feasibility in mitigating veterinary antibiotic pollution, thereby safeguarding aquatic ecosystems and reducing the risks of antibiotic resistance.

Metal oxide-based photocatalysts for the efficient degradation of organic pollutants for a sustainable environment: a review

Photocatalytic degradation is a highly efficient technique for eliminating organic pollutants such as antibiotics, organic dyes, toluene, nitrobenzene, cyclohexane, and refinery oil from the environment. The effects of operating conditions, concentrations of contaminants and catalysts, and their impact on the rate of deterioration are the key focuses of this review. This method utilizes light-activated semiconductor catalysts to generate reactive oxygen species that break down contaminants. Modified photocatalysts, such as metal oxides, doped metal oxides, and composite materials, enhance the effectiveness of photocatalytic degradation by improving light absorption and charge separation. Furthermore, operational conditions such as pH, temperature, and light intensity also play a crucial role in enhancing the degradation process. The results indicated that both high pollutant and catalyst concentrations improve the degradation rate up to a threshold, beyond which no significant benefits are observed. The optimal operational conditions were found to significantly enhance photocatalytic efficiency, with a marked increase in degradation rates under ideal settings. Antibiotics and organic dyes generally follow intricate degradation pathways, resulting in the breakdown of these substances into smaller, less detrimental compounds. On the other hand, hydrocarbons such as toluene and cyclohexane, along with nitrobenzene, may necessitate many stages to achieve complete mineralization. Several factors that affect the efficiency of degradation are the characteristics of the photocatalyst, pollutant concentration, light intensity, and the existence of co-catalysts. This approach offers a sustainable alternative for minimizing the amount of organic pollutants present in the environment, contributing to cleaner air and water. Photocatalytic degradation hence holds tremendous potential for remediation of the environment.

New Insights into Materials for Pesticide and Other Agricultural Pollutant Remediation

The increase in the world population and the intensification of agricultural practices have resulted in the release of several contaminants into the environment, especially pesticides and heavy metals. This article reviews recent advances in using adsorbent and catalytic materials for environmental decontamination. Different materials, including clays, carbonaceous, metallic, polymeric, and hybrid materials, are evaluated for their effectiveness in pollutant removal. Adsorption is an effective technique due to its low cost, operational simplicity, and possibility of adsorbent regeneration. Catalytic processes, especially those using metallic nanoparticles, offer high efficiency in degrading complex pesticides. Combining these technologies can enhance the efficiency of remediation processes, promoting a more sustainable and practical approach to mitigate the impacts of pesticides and other agricultural pollutants on the environment. Therefore, this review article aims to present several types of materials used as adsorbents and catalysts for decontaminating ecosystems affected by agricultural pollutants. It discusses recent works in literature and future perspectives on using these materials in environmental remediation. Additionally, it explores the possibilities of using green chemistry principles in producing sustainable materials and using agro-industrial waste as precursors of new materials to remove contaminants from the environment.

Photodegradation of a Broad-Spectrum Antibiotic Azithromycin Using H2O2 under Ultraviolet Irradiation

The photodegradation of azithromycin present was carried out in water using H2O2 under UV irradiation. The reaction variables considered in this study were the amount of H2O2 solution and the initial concentration of azithromycin to evaluate the performance of the photodegradation process. The azithromycin degradation was not observed in the dark during stirring for 20 min. The study showed an efficient photodegradation of azithromycin using H2O2 as an oxidant in the presence of UV irradiation. The azithromycin degradation was altered significantly by the pH of the irradiated solution. The degradation was low at an acidic pH and showed an increasing trend as the pH changed to basic. The azithromycin degradation increased with a higher amount (higher concentration) of H2O2. The degradation of azithromycin decreased with a higher concentration of azithromycin in the reacting solution. The highest degradation of AZT was achieved in 1 h using a 1.0 ppm AZT solution containing 3 mL of H2O2. The experimental data obtained were well-fitted to zero-order reaction kinetics. The results of this study were found quite excellent. They showed 100% degradation in 1 h when compared with those reported in the literature, both with photocatalysis using nanomaterials and photolysis using light irradiation and/or H2O2. The UV/H2O2 system was found to be quite efficient for the photodegradation of azithromycin, and this system can be applied to degrade other organic pollutants present in industrial wastewater.

Robust CA-GO-TiO2/PTFE Photocatalytic Membranes for the Degradation of the Azithromycin Formulation from Wastewaters

We have developed an innovative thin-film nanocomposite membrane that contains cellulose acetate (CA) with small amounts of TiO2-decorated graphene oxide (GO) (ranging from 0.5 wt.% to 2 wt.%) sandwiched between two polytetrafluoroethylene (PTFE)-like thin films. The PTFE-like films succeeded in maintaining the bulk porosity of the support while increasing the thermal and chemical robustness of the membrane and boosting the catalytic activity of TiO2 nanoparticles. The membranes exhibited a specific chemical composition and bonding, with predominant carbon-oxygen bonds from CA and GO in the bulk, and carbon-fluorine bonds on their PTFE-like coated sides. We have also tested the membranes' photocatalytic activities on azithromycin-containing wastewaters, demonstrating excellent efficiency with more than 80% degradation for 2 wt.% TiO2-decorated GO in the CA-GO-TiO2/PTFE-like membranes. The degradation of the azithromycin formulation occurs in two steps, with reaction rates being correlated to the amount of GO-TiO2 in the membranes.

Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH2-MIL-53(Al)-derived amine-functionalized porous carbons

Several activities such as aquaculture, human and feedstock therapies can directly release antibiotics into water. Due to high stability, low hydrolysis and non-biodegradation, they can accumulate in the aqueous environment and transport to aquatic species. Here, we synthesized amine-functionalized porous carbons (ANC) by a direct-pyrolysis process of NH2-MIL-53(Al) as a sacrificial template at between 600 and 900 °C and utilized them to eliminate chloramphenicol antibiotic from water. The NH2-MIL-53(Al)-derived porous carbons obtained high surface areas (304.7-1600 m2 g-1) and chloramphenicol adsorption capacities (148.3-261.5 mg g-1). Several factors such as hydrogen bonding, Yoshida hydrogen bonding, and π-π interaction, hydrophobic interaction possibly controlled adsorption mechanisms. The ANC800 could be reused four cycles along with high stability in structure. As a result, NH2-MIL-53(Al)-derived porous carbons are recommended as recyclable and efficient adsorbents to the treatment of antibiotics in water.

Contaminants of Emerging Concern: Antibiotics Research in Mussels from the Coasts of the Tyrrhenian Sea (Sardinia, Italy)

Contaminants of emerging concern (CECs) are compounds found in several environmental compartments whose ubiquitous presence can cause toxicity for the entire ecosystem. Several personal care products, including antibiotics, have entered this group of compounds, constituting a major global threat. It is essential to develop simple and reliable methods by which to quantify these contaminants in several matrices. In this work, mussels were chosen as sentinel organisms to assess environmental pollution and the safety of bivalve mollusk consumption according to the "One Health perspective". A liquid chromatographic tandem mass spectrometry method (LC-MS/MS) was developed for the quantification of two macrolides, erythromycin (ERY) and azithromycin (AZI), in mussels. This new method was validated according to international guidelines, showing high selectivity, good recoveries (>60% for both of them), sensitivity, and precision. The method was successfully applied for ERY and AZI research in mussels farmed along the Sardinian coasts (Italy), demonstrating itself to be useful for routine analysis by competent authorities. The tested macrolides were not determined in the analyzed sites at concentrations above the limits of detection (LODs). These results demonstrate the food safety of mussels (as concerns the studied antibiotics) and a negligible amount of pollution derived from these drugs in the studied area.

Mechanism of biochar composite (BN3Z0.5BC) activated peracetic acid for efficient antibiotic degradation: Synergistic effect between free radicals and non-free radicals

This study utilized corn straw as the feedstock to synthesize biochar (BC) loaded with cobalt-zeolitic imidazolate framework nanoparticles and boron nitride quantum dots. The prepared BC composite, named BN3Z0.5BC, efficiently activated peracetic acid (PAA), resulting in the degradation of 94.8% of sulfadiazine (SDZ) in five minutes. Compared to pure BC, the SDZ removal rate increased nearly 5-fold. Mechanism analysis revealed that the main degradation pathway involves synergism between free and non-free radicals. The defect structure on the BC surface possesses a high charge density, stimulating PAA to produce more active species, while nitrogen-oxygen vacancy formation significantly promotes charge transfer. Besides, the unique structure of BC ensures good stability and recyclability, effectively controlling metal leaching. The BN3Z0.5BC/PAA system shows promising applicability across various water matrices, indicating a favorable application outlook.

Potential mechanism of biochar enhanced degradation of oxytetracycline by Pseudomonas aeruginosa OTC-T

Extensive use of oxytetracycline (OTC) and the generation of its corresponding resistance genes have resulted in serious environmental problems. Physical-biological combined remediation is an attractive method for OTC degradation because of its high remediation efficiency, stability, and environmental friendliness. In this study, an effective OTC-degrading strain identified as Pseudomonas aeruginosa OTC-T, was isolated from chicken manure. In the degradation experiment, the degradation rates of OTC in the degradation systems with and without the biochar addition were 92.71-100 % and 69.11-99.59 %, respectively. Biochar improved the tolerance of the strain to extreme environments, and the OTC degradation rate increased by 20.25 %, 18.61 %, and 13.13 % under extreme pH, temperature, and substrate concentration conditions, respectively. Additionally, the degradation kinetics showed that biochar increased the reaction rate constant in the degradation system and shortened the degradation period. In the biological toxicity assessment, biochar increased the proportion of live cells by 17.63 % and decreased the proportion of apoptotic cells by 58.87 %. Metabolomics revealed that biochar had a significant effect on the metabolism of the strains and promoted cell growth and reproduction, effectively reducing oxidative stress induced by OTC. This study elucidates how biochar affects OTC biodegradation and provides insights into the future application of biochar-assisted microbial technology in environmental remediation.

Next-generation hybrid technologies for the treatment of pharmaceutical industry effluents

Water and industries are intangible units of the globe that are always set to meet the population's demand. The global population depends on one-third of freshwater increasing the demand. The increase in population along with urbanization has polluted the fresh water resources. The pharmaceutical industry is marked as an emerging contaminant of water pollution. The most common type of pharmaceutical drugs that are detected in the environment includes antibiotics, analgesics, NSAIDs, and pain-relieving drugs. These drugs alter the food chain of the organisms causing chaos mainly in the marine ecosystem. Pharmaceutical drugs are found only in shallow amounts (ng/mg) they have a huge impact on the living system. The consumption of water contaminated with pharmaceutical ingredients can disrupt reproduction, hormonal imbalance, cancer, and respiratory problems. Various methods are used to remove these chemicals from the environment. In this review, we mainly focused on the emerging hybrid technologies and their significance in the effective treatment of pharmaceutical wastewater. This review paper primarily elaborates on the merits and demerits of existing conventional technologies helpful in developing integrated technologies for the modern era of pharmaceutical effluent treatment. This review paper further in detail discusses the various strategies of eco-friendly bioremediation techniques namely biostimulation, bioaugmentation, bacterial degradation, mycoremediation, phytoremediation, and others for the ultimate removal of pharmaceutical contaminants in wastewater. The review makes clear that targeted and hybrid solutions are what the world will require in the future to get rid of these pharmacological prints.

All-inorganic lead halide perovskites for photocatalysis: a review

Nowadays, environmental pollution and the energy crisis are two significant concerns in the world, and photocatalysis is seen as a key solution to these issues. All-inorganic lead halide perovskites have been extensively utilized in photocatalysis and have become one of the most promising materials in recent years. The superior performance of all-inorganic lead halide perovskites distinguish them from other photocatalysts. Since pure lead halide perovskites typically have shortcomings, such as low stability, poor active sites, and ineffective carrier extraction, that restrict their use in photocatalytic reactions, it is crucial to enhance their photocatalytic activity and stability. Huge progress has been made to deal with these critical issues to enhance the effects of all-inorganic lead halide perovskites as efficient photocatalysts in a wide range of applications. In this manuscript, the synthesis methods of all-inorganic lead halide perovskites are discussed, and promising strategies are proposed for superior photocatalytic performance. Moreover, the research progress of photocatalysis applications are summarized; finally, the issues of all-inorganic lead halide perovskite photocatalytic materials at the current state and future research directions are also analyzed and discussed. We hope that this manuscript will provide novel insights to researchers to further promote the research on photocatalysis based on all-inorganic lead halide perovskites.

Photodegradation for different dissociated species of norfloxacin and ofloxacin in water ice under solar irradiation

Ice is an important medium that regulates the transformation of organic contaminants. Nonetheless, photodegradation of emerging fluoroquinolone (FQ) antibiotics in the ice, particularly those with varying dissociated species, remains inadequately explored. In this study, the photodegradation of norfloxacin (NOR) and ofloxacin (OFL) in different dissociated species in water ice were investigated. Results indicated that the quantum yield of the zwitterion for NOR in the ice was 1.7-5.0 times higher than that of the cation, and 1.3 times higher than that of the anion. The quantum yield of the zwitterion for OFL in the ice was 2.5-3.4 times higher than that of the cation, and 1.4 times higher than that of the anion. The degradation pathways of NOR and OFL with different dissociated species depended on their molecular structure. Most products possessed lower developmental toxicity than parent NOR and OFL, respectively. OFL showed a higher inhibitory rate of Escherichia coli activity at the initial time of photodegradation, which was higher than that of NOR. This study offers novel insights into the impact of dissociated species on the photodegradation of FQs in ice and contributes to understanding the environmental behavior of fluorinated pharmaceuticals in the cryosphere.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.