A strategy for As(III) determination based on ultrafine gold nanoparticles decorated on magnetic graphene oxide

Fluid-specific detection of environmental pollutant moxifloxacin hydrochloride utilizing a rare-earth niobate decorated functionalized carbon nanofiber sensor platform

The development of precise and efficient detection methods is essential for the real-time monitoring of antibiotics, especially in environmental and biological matrices. This study aims to address this challenge by introducing a novel electrochemical sensor for the targeted detection of moxifloxacin hydrochloride (MFN), a fourth-generation fluoroquinolone. The sensor is based on a holmium niobate (HNO) and functionalized carbon nanofiber (f-CNF) nanocomposite, synthesized via a hydrothermal approach and subsequently characterized for its structural and electrochemical properties. When deposited onto a glassy carbon electrode (GCE), the HNO/f-CNF nanocomposite demonstrated exceptional electrochemical performance, as assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The sensor exhibited remarkable sensitivity, with a detection limit of 0.034 μM, a quantification limit of 0.11 μM, and a sensitivity of 0.69 μA μM-1 cm-2. It also achieved a broad linear detection range from 0.001 μM to 1166.11 μM, making it highly effective for MFN detection across various complex matrices, including environmental waters, biological fluids, and artificial saliva, with recovery rates between 98.15% and 101.75%. The novelty of this work lies in the unique combination of HNO's catalytic properties and f-CNF's enhanced electron transport, establishing a highly selective and sensitive platform for MFN detection. This sensor not only advances the field of electrochemical sensing but also offers a promising tool for real-time environmental and pharmaceutical monitoring.

A sensitive bromate sensor based on a gold nanoparticle-poly(diallyldimethylammonium chloride)-reduced graphene oxide nanocomposite modified glassy carbon electrode

A nanocomposite consisting of gold nanoparticles (AuNPs), poly(diallyldimethylammonium chloride) (PDDA), and reduced graphene oxide (rGO) was fabricated by a two-step chemical reduction method. Firstly, a PDDA-rGO composite was prepared by using hydrazine hydrate as a reducing agent. Subsequently, the AuNP-PDDA-rGO composite was prepared in ethylene glycol with PDDA-rGO and HAuCl4 as raw materials using sodium citrate as a reduction agent. The resulting composite was characterized using X-ray powder diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), and electrochemical methods. This composite was then modified on a glassy carbon electrode (GCE) by the dropping method. The electrochemical behavior of bromate on this modified electrode was investigated. The results showed that PDDA-rGO can be used as a good carrier to obtain AuNPs with small particle sizes and good dispersion. The AuNPs and PDDA-rGO in composite enhanced the electrochemical activity of the electrode. Under the synergistic action of each component, the resulting electrode exhibited high activity for the electrochemical reduction of bromate. Based on this, an amperometric bromate sensor was fabricated in N2-saturated 0.10 mol/L HCl with attractive features including a wide linear range of 1.0 × 10-7-1.7 × 10-3 mol/L, a low detection limit (3sb) of 3.2 × 10-8 mol/L, and a high sensitivity of 2317 µA/mM/cm2. The sensor was successively used for the determination of bromate in drinking water.

Highly sensitive determination of trace arsenic(III) onto carbon paste electrode modified with graphitic carbon nitride decorated Fe-MOF

An effective electrochemical sensor was developed to detect and determine of the As(III) by modifying the carbon paste electrode (CPE) with graphitic carbon nitride decorated with iron-based metal-organic frameworks (Fe-MOF/g-C3N5). The differential pulse anodic stripping voltammetry (DPASV) method was used to analyze As(III) ions in a phosphate buffer solution (0.10 M, pH = 5). Fe-MOF/g-C3N5/CPE showed high sensitivity (4.24 μA μg-1 L), satisfactory linear range (0.50 μg L-1-5.00 μg L-1 and 5.00 μg L-1-30.00 μg L-1), and low detection limit (LOD, 0.013 μg L-1). The prepared sensor was showed an excellent repeatability and selectivity, and successfully used for determination of the As(III) ion in ambient waters and apple juice samples.

2,5-Thienylene-Strapped [26]Hexaphyrin as Multifunctional Chemosensor for Hg2+, Cu2+, and F- Ions

The sensing behavior of 2,5-thienylene-bridged tetrakis(2,6-dichlorophenyl)-[26]hexaphyrin (2) towards various metal ions and anions were investigated by UV-vis and fluorescence spectroscopies. Using this strapped hexaphyrin (2), the molecular sensor displayed highly selective and sensitive colorimetric responses to Cu2+ and Hg2+ in MeOH/THF. The spectral changes are distinctive enough in the visible region of the spectrum to enable naked-eye detection. The detection limits of Cu2+ and Hg2+ using this chemo-sensor in a mixed MeOH/THF solution were 1.978 and 1.283 μM, respectively, and 1.052 μM for F- in dichloromethane. Chemosensor 2,5-thienylene strapped [26]hexaphyrin (2) shows absorption responses both a 1 : 1 molecular ratio for 2 interacting with Cu2+ and Hg2+ and a 1 : 2 ratio between 2 and F- ions.

Laser-induced graphene electrochemical sensor for quantitative detection of phytotoxic aluminum ions (Al3+) in soils extracts

Aluminum in its Al3+ form is a metal that inhibits plant growth, especially in acidic soils (pH < 5.5). Rapid and accurate quantitative detection of Al3+ in agricultural soils is critical for the timely implementation of remediation strategies. However, detecting metal ions requires time-consuming preparation of samples, using expensive instrumentation and non-portable spectroscopic techniques. As an alternative, electrochemical sensors offer a cost-effective and minimally invasive approach for in situ quantification of metal ions. Here, we developed and validated an electrochemical sensor based on bismuth-modified laser-induced graphene (LIG) electrodes for Al3+ quantitative detection in a range relevant to agriculture (1-300 ppm). Our results show a linear Al3+ detection range of 1.07-300 ppm with a variation coefficient of 5.3%, even in the presence of other metal ions (Pb2+, Cd2+, and Cu2+). The sensor offers a limit of detection (LOD) of 0.34 ppm and a limit of quantification (LOQ) of 1.07 ppm. We compared its accuracy for soil samples with pH < 4.8 to within 89-98% of spectroscopic methods (ICP-OES) and potentiometric titration. This technology's portability, easy to use, and cost-effectiveness make it a promising candidate for in situ quantification and remediation of Al3+ in agricultural soils and other complex matrices.

The comprehensive review about elements accumulation in industrial hemp (Cannabis sativa L.)

Cannabis sativa L., commonly known as industrial hemp, is a versatile plant with applications ranging from medicinal to agricultural and industrial uses. Despite its benefits, there is a notable gap in regulatory toxicology, in understanding the extent of element accumulation in hemp, which is critical due to its ability to absorb various elements from the soil, including heavy metals (Pb, Cd, Hg, and As), uptakes potential toxic elements (e.g., Sb, Sn, Sr, Bi, Tl), problematic elements (Ni, Cr, Co), and essential elements (Zn, Cu, Fe, Mn). The paper aims to enrich current understandings by offering a comprehensive analysis of elements absorption in industrial hemp. This study emphasizes the potential health risks linked with hemp consumption including regulatory toxicology aspects: limits, Permitted Daily Exposures (PDE), recommendations in different countries and from different agencies/bodies (like the WHO and the EU) based on route of administration, jurisdiction and actual literature review. This review contributes significantly to the knowledge base on hemp safety, serving as a valuable resource for researchers, regulatory bodies, and industry stakeholders.

Application of Ag nanoparticles decorated on graphene nanosheets for electrochemical sensing of CEA as an important cancer biomarker

In this research, a novel biosensing platform is described based on graphene nano-sheets decorated with Ag nano-particles (GNSs@Ag NPs). The designed electrochemical aptasensor was employed to determine carcinoembryonic antigen (CEA), an important cancer biomarker. Inherently, aptasensing interfaces provide high sensitivity for CEA tumor marker because of the high specific surface area and excellent conductivity of the prepared GNSs@Ag NPs composite. The established assay demonstrated a wide linear range from 0.001 pg/mL to 10 pg/mL with a correlation coefficient of 0.9958 and low detection limit (DL) of 0.5 fg/mL based on S/N = 3 protocol. The derived biosensor illustrated acceptable selectivity towards common interfering species including HER2, VEGF, IgG, MUC1 and CFP10. In addition, the aptsensor showed good reproducibility and fast response time. The applicability of the suggested strategy in human serum samples was also examined and compared to the commercial enzyme-linked immunosorbent assay (ELISA). Based on the experimental data, it was found that the discussed sensing platform can be exerted in the monitoring of CEA in different cancers for early diagnosis.

Copper nanoparticles/polyaniline/molybdenum disulfide composite as a nonenzymatic electrochemical glucose sensor

A Cu@Pani/MoS2 nanocomposite was successfully synthesized via combined in-situ oxidative polymerization and hydrothermal reaction and applied to an electrochemical nonenzymatic glucose sensor. The morphology of the prepared Cu@Pani/MoS2 nanocomposite was characterized using FE-SEM and Cs-STEM, and electrochemical analysis was performed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry techniques. Electrostatic interaction between Cu@Pani and MoS2 greatly enhanced the charge dispersion, electrical conductivity, and stability, resulting in excellent electrochemical performance. The Cu@Pani/MoS2 was used as an electrocatalyst to detect glucose in an alkaline medium. The proposed glucose sensor exhibited a sensitivity, detection limit, and wide linear range of 69.82 μAmM-1cm-2, 1.78 μM, and 0.1-11 mM, respectively. The stability and selectivity of the Cu@Pani/MoS2 composite for glucose compared to that of the potential interfering species, as well as its ability to determine the glucose concentration in diluted human serum samples at a high recovery percentage, demonstrated its viability as a nonenzymatic glucose sensor.

Novel biosynthesis of gold nanoparticles for multifunctional applications: Electrochemical detection of hydrazine and treatment of gastric cancer

In this work, an environmentally friendly strategy was used to synthesize gold nanoparticles (Au NPs) using Olea europaea (olive) fruit. Transmission electron microscopy (TEM), UV-Vis spectroscopy, X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) were used to characterize the physicochemical properties of the synthesized NPs. An Au NPs modified glassy carbon electrode was used to investigate the direct electrochemical oxidation of hydrazine. The suggested hydrazine sensor has good performance, such as a wide linear range (2.5-275 μM), low limit of detection (0.09 μM), notable selectivity and excellent reproducibility (RSD = 2.2%). The in-vitro cytotoxicity of three human cancer cell lines (KATOIII, NCI-N87, and SNU-16) was also explored with various concentrations of Au NPs prepared from olive fruit extract. Bio-synthesized Au NPs were found to have cytotoxic properties against gastric cancer in humans based on MTT assay protocol. The obtained results show that green synthesized Au NPs can be successfully employed in electrochemical sensing and cancer treatment applications.

Follow up of the prostate cancer treatment based on a novel sensing method for anti-prostate cancer drug (flutamide)

In this work, novel modified electrode (MXene/MIL-101(Cr)/GCE) are manufactured through simple layer-by-layer immobilization procedure. The fabricated electrochemical sensor was utilized for electrochemical sensing of flutamide in biological fluids. The immobilization of both MXene and metal-organic framework (MOF) materials on the electrode surface could improve the electrochemical performance of the modified glassy carbon electrode (GCE) towards flutamide due to the synergic effects. The established sensor illustrated the significant sensing ability for the determination of flutamide. The influence of solution pH and volume ratio of MXene/MIL-101(Cr) on electrochemical performance of the modified GCE was researched and optimized. The sensor demonstrated a favorable detection limit of 0.009 μM and a linear range of 0.025-100 μM using differential pulse voltammetry (DPV) technique. The suggested assay illustrated an excellent sensing efficiency towards flutamide in body fluids with recoveries ranging from 97.7% to 102.5%, which indicates its potential in real matrices. In addition, the MXene/MIL-101(Cr)/GCE was illustrated some advantages including simple preparation, good selectivity and reproducibility, and rapid flutamide detection.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Novel biogenic preparation of gold nanoparticles decorated on sepiolite clay and evaluation of anti-cancer effect on gastric cancer cell and electrochemical sensing of nitrite

An environmentally friendly strategy was used in this study to synthesize gold nanoparticles decorated on sepiolite clay (GNPs-SC) using Heracleum persicum grass extract. The physicochemical characters of the prepared composite were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). A GNPs-SC modified carbon pate electrode (CPE) was used to study the electrochemical oxidation of nitrite. The proposed nitrite sensor exhibits excellent performance, including a broad linear range (1.0-150 μM), a low limit of detection (0.4 μM), and acceptable reproducibility (RSD = 2.6%). As well, the prepared GNPs-SC was tested for its effectiveness against human gastric adenocarcinoma (AGS) cell line. The MTT assay protocol revealed that the bio-synthesized product displayed significant cytotoxic activity against gastric cancer in human subjects. The findings of this study indicate that GNPs-SC, synthesized using environmentally friendly protocol, exhibit great potential for use in electrochemical sensing and treatment of human cancer.

Quercetin suppresses retinoblastoma cell proliferation and invasion and facilitates oxidative stress-induced apoptosis through the miR-137/FNDC5 axis

Retinoblastoma (RB) constitutes a prevalent malignancy in clinic and usually occurs in children under the age of 5 years old. The increased frequency of malignant tumor metastases and the delayed diagnosis and treatment caused unsatisfactory therapeutic efficiency. Quercetin was formerly identified to impede tumor growth in certain malignancies. Our study attempted to investigate the effects and mechanisms of quercetin in Rb development, in order to provide an effective clinical therapeutic approach. Rb cell lines (WER1-RB1 and Y79) were incubated with different concentrations of quercetin, and then cell proliferation, invasion, apoptosis, and oxidative stress were determined. It was showed that quercetin restrained Rb cell proliferation and invasion, and induced cell apoptosis and oxidative stress in a dose dependent manner. Moreover, we found that quercetin incubation upregulated miR-137 expression in Rb cells. MiR-137 inhibition abrogated quercetin-mediated inhibition of Rb cell progression. Furthermore, dual-luciferase reporter gene assay validated that fibronectin type III domain-containing protein 5 (FNDC5) was a target for miR-137. MiR-137 overexpression restrained proliferation and invasion, and enhanced apoptosis and oxidative stress in Rb cells, whereas FNDC5 overexpression abrogated these effects. Additionally, nude mice were injected with WER1-RB1 cells to establish a xenograft tumor model, and then treated with 50 or 100 mg/kg quercetin. Quercetin treatment mitigated xenograft tumor growth in nude mice. In conclusion, quercetin restrained proliferation and invasion, and induced apoptosis and oxidative stress in Rb cells through regulating the miR-137/FNDC5 pathway. We expected that our study could provide an effective approach for Rb treatment. However, quercetin and miR-137 may have off-target effects in Rb cells, and our study still has certain limitations. Therefore, we will investigate the effects of quercetin on other signaling pathways in Rb cells and explore the application of combination therapy in follow-up experiments, in order to provide a rigorous research basis for the treatment of Rb with quercetin.

Employing Pd nanoparticles decorated on halloysite nanotube/carbon composite for electrochemical aptasensing of HER2 in breast cancer patients

An effective biosensing platform is described based on halloysite nanotube/carbon composite decorated with Pd nanoparticles (HNT/C@Pd NPs). A novel electrochemical aptasensor was designed using the proposed nano-platform to determine human epidermal growth factor receptor 2 (HER2), a breast cancer biomarker. Inherently, aptasensing interfaces provide high sensitivity and selectivity for tumor markers owing to the high specific surface area of HNT/C and good conductivity stems from deposition of Pd NPs into HNT/C composite. With a correlation coefficient of 0.996, the electrochemical aptasensor demonstrated a wide linear range from 0.03 ng/mL to 9 ng/mL. The limit of detection (LOD) of the established assay was 8 pg/mL based on S/N = 3 method. Further, the designed biosensor demonstrated acceptable selectivity, good reproducibility, and high stability. The applicability of the impedimetric sensor in human serum samples was also examined and compared to enzyme-linked immunosorbent assay (ELISA) assay (p-value >0.05). Based on the results, it was found that the proposed methodology can be used in quantification of breast cancer markers for early diagnosis and treatment.

Wastewater reuse in agriculture: Prospects and challenges

Sustainable water recycling and wastewater reuse are urgent nowadays considering water scarcity and increased water consumption through human activities. In 2015, United Nations Sustainable Development Goal 6 (UN SDG6) highlighted the necessity of recycling wastewater to guarantee water availability for individuals. Currently, wastewater irrigation (WWI) of crops and agricultural land appears essential. The present work overviews the quality of treated wastewater in terms of soil microbial activities, and discusses challenges and benefits of WWI in line with wastewater reuse in agriculture and aquaculture irrigation. Combined conventional-advanced wastewater treatment processes are specifically deliberated, considering the harmful impacts on human health arising from WWI originating from reuse of contaminated water (salts, organic pollutants, toxic metals, and microbial pathogens i.e., viruses and bacteria). The comprehensive literature survey revealed that, in addition to the increased levels of pathogen and microbial threats to human wellbeing, poorly-treated wastewater results in plant and soil contamination with toxic organic/inorganic chemicals, and microbial pathogens. The impact of long-term emerging pollutants like plastic nanoparticles should also be established in further studies, with the development of standardized analytical techniques for such hazardous chemicals. Likewise, the reliable, long-term and extensive judgment on heavy metals threat to human beings's health should be explored in future investigations.

Fabrication of an ultra-sensitive electrochemical DNA biosensor based on CT-DNA/NiFe2O4NPs/Au/CPE for detecting rizatriptan benzoate

A novel and first electrochemical biosensor based on Deoxyribonucleic acid (DNA) as a biological component to measure an antimigraine drug, rizatriptan benzoate (RZB) for patients under treatment in biological samples was developed. A carbon paste electrode (CPE) was modified by calf thymus (CT) double-stranded (ds)-DNA, nickel ferrite magnetic nanoparticles (NiFe2O4NPs), and gold nanoparticles (AuNPs). The morphology of the CT-DNA/NiFe2O4NPs/AuNPs/CPE was characterized by Field emission scanning electron microscope (FESEM). The presence of NiFe2O4NPs and AuNPs was confirmed by energy-dispersive X-ray spectroscopy (EDS) image of the NiFe2O4NPs/AuNPs/CPE surface. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to determine the structure and electrochemical characteristics of the CT-DNA/NiFe2O4NPs/AuNPs/CPE. Differential pulse voltammetry (DPV) was used to investigate the electrochemical behavior of RZB. Chronoamperometry (CA) was applied to study the effect of CT-DNA immobilization time on the peak oxidation current of RZB accumulated on the surface of the CT-DNA/NiFe2O4NPs/AuNPs/CPE. The results showed that, under optimum conditions, the prepared electrode responded linearly to RZB concentrations between 0.01 and 2.0 μM, with a 0.0033 μM detection limit (LOD) and 0.01 μM limit of quantification (LOQ). The parameters influencing the biosensor performance (temperature, CT-DNA immobilization time, and RZB/CT-DNA accumulation time) were optimized. DPV showed the displacement of the peak potential towards positive values and the reduction of its current, indicating that the drug could intercalate between the guanine base pairs of CT-DNA. Our biosensor was successfully applied for RZB measurement in human urine, blood serum, plasma samples, and tablets. The presented biosensor was fast response, sensitive, selective, cost-effective, and easy-to-use for RZB determination in pharmaceutical formulations and biological samples.

Advancement in precision diagnosis and therapeutic for triple-negative breast cancer: Harnessing diagnostic potential of CRISPR-cas & engineered CAR T-cells mediated therapeutics

Cancer is characterized by uncontrolled cell growth, disrupted regulatory pathways, and the accumulation of genetic mutations. These mutations across different types of cancer lead to disruptions in signaling pathways and alterations in protein expression related to cellular growth and proliferation. This review highlights the AKT signaling cascade and the retinoblastoma protein (pRb) regulating cascade as promising for novel nanotheranostic interventions. Through synergizing state-of-the-art gene editing tools like the Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-Cas system with nanomaterials and targeting AKT, there is potential to enhance cancer diagnostics significantly. Furthermore, the integration of modified CAR-T cells into multifunctional nanodelivery systems offers a promising approach for targeted cancer inhibition, including the eradication of cancer stem cells (CSCs). Within the context of highly aggressive and metastatic Triple-negative Breast Cancer (TNBC), this review specifically focuses on devising innovative nanotheranostics. For both pre-clinical and post-clinical TNBC detection, the utilization of the CRISPR-Cas system, guided by RNA (gRNA) and coupled with a fluorescent reporter specifically designed to detect TNBC's mutated sequence, could be promising. Additionally, a cutting-edge approach involving the engineering of TNBC-specific iCAR and syn-Notch CAR T-cells, combined with the co-delivery of a hybrid polymeric nano-liposome encapsulating a conditionally replicative adenoviral vector (CRAdV) against CSCs, could present an intriguing intervention strategy. This review thus paves the way for exciting advancements in the field of nanotheranostics for the treatment of TNBC and beyond.

An overview on nanoplatforms for statins delivery: Perspectives for safe and effective therapy

Statins are the most widely used pharmacological agents for reducing blood cholesterol levels and treating atherosclerotic cardiovascular diseases. Most of the statins' derivatives have been limited by water solubility, bioavailability, and oral absorption, which has led to adverse effects on several organs, especially at high doses. As an approach to reducing statin intolerance, achieving a stable formulation with improved efficacy and bioavailability at low doses has been suggested. Nanotechnology-based formulations may provide a therapeutic benefit over traditional formulations in terms of potency and biosafety. Nanocarriers can provide tailored delivery platforms for statins, thereby enhancing the localized biological effects and lowering the risk of undesired side effects while boosting statin's therapeutic index. Furthermore, tailored nanoparticles can deliver the active cargo to the desired site, which culminates in reducing off-targeting and toxicity. Nanomedicine could also provide opportunities for therapeutic methods by personalized medicine. This review delves into the existing data on the potential improvement of statin therapy using nano-formulations.

Targeted therapy of breast tumor by PLGA-based nanostructures: The versatile function in doxorubicin delivery

Breast carcinoma is a molecularly diverse illness, and it is among the most prominent and often reported malignancies in female across the globe. Surgical intervention, chemotherapy, immunotherapy, gene therapy, and endocrine treatment are among the currently viable treatment options for the carcinoma of breast. Chemotherapy is among the most prevalent cancer management strategy. Doxorubicin (DOX) widely employed as a cytostatic medication for the treatment of a variety of malignancies. Despite its widespread acceptance and excellent efficacy against an extensive line up of neoplasia, it has a variety of shortcomings that limit its therapeutic potential in the previously mentioned indications. Employment of nanoparticulate systems has come up as a unique chemo medication delivery strategy and are being considerably explored for the amelioration of breast carcinoma. Polylactic-co-glycolic acid (PLGA)-based nano systems are being utilized in a number of areas within the medical research and medication delivery constitutes one of the primary functions for PLGA given their inherent physiochemical attributes, including their aqueous solubility, biocompatibility, biodegradability, versatility in formulation, and limited toxicity. Herein along with the different application of PLGA-based nano formulations in cancer therapy, the present review intends to describe the various research investigations that have been conducted to enumerate the effectiveness of DOX-encapsulated PLGA nanoparticles (DOX-PLGA NPs) as a feasible treatment option for breast cancer.