Determination of ochratoxin A in wheat after clean-up through a DNA aptamer-based solid phase extraction column

DeltaGzip: Computing Biopolymer-Ligand Binding Affinity via Kolmogorov Complexity and Lossless Compression

The design of biosequences for biosensing and therapeutics is a challenging multistep search and optimization task. In principle, computational modeling may speed up the design process by virtual screening of sequences based on their binding affinities to target molecules. However, in practice, existing machine-learned models trained to predict binding affinities lack the flexibility with respect to reaction conditions, and molecular dynamics simulations that can incorporate reaction conditions suffer from high computational costs. Here, we describe a computational approach called DeltaGzip that evaluates the free energy of binding in biopolymer-ligand complexes from ultrashort equilibrium molecular dynamics simulations. The entropy of binding is evaluated using the Kolmogorov complexity definition of entropy and approximated using a lossless compression algorithm, Gzip. We benchmark the method on a well-studied data set of protein-ligand complexes comparing the predictions of DeltaGzip to the free energies of binding obtained using Jarzynski equality and experimental measurements.

Determination of Aflatoxin B1 in Grains by Aptamer Affinity Column Enrichment and Purification Coupled with High Performance Liquid Chromatography Detection

Aflatoxin B1 (AFB1) is a highly teratogenic and carcinogenic secondary metabolite produced by Aspergillus. It is commonly detected in agricultural products such as cereals, peanuts, corn, and feed. Grains have a complex composition. These complex components severely interfere with the effective extraction and separation of AFB1, and also cause problems such as matrix interference and instrument damage, thus posing a great challenge in the accurate analysis of AFB1. In this study, an aptamer affinity column for AFB1 analysis (AFB1-AAC) was prepared for the enrichment and purification of AFB1 from grain samples. AFB1-AAC with an AFB1-specific aptamer as the recognition element exhibited high affinity and specificity for AFB1. Grain samples were enriched and purified by AFB1-AAC, and subsequently analyzed by high performance liquid chromatography with post-column photochemical derivatization-fluorescence detection (HPLC-PCD-FLD). The average recoveries of AFB1 ranged from 88.7% to 99.1%, with relative standard deviations (RSDs) of 1.4-5.6% (n = 3) at the spiked levels of 5.0-20.0 μg kg-1. The limit of detection (LOD) for AFB1 (0.02 μg kg-1) was much below the maximum residue limits (MRLs) for AFB1. This novel method can be applied to the determination of AFB1 residues in peanut, corn, and rice.

Aptamer affinity-based microextraction in-line coupled to capillary electrophoresis mass spectrometry using a porous layer/nanoparticle -modified open tubular column

An aptamer affinity based microextraction column is developed to be directly in-line coupled to capillary electrophoresis-mass spectrometry (CE-MS) for analyzing mycotoxins in food samples. Single-stranded DNA aptamers for selective recognition of aflatoxin B1 (AFB1) and ochratoxin A (OTA) targets are co-immobilized via covalent bonds on the surface of the inlet end of a capillary, which is pre-modified with three-dimensional porous layer and gold nanoparticles to enhance the specific surface area and loading capacity. The outlet of the capillary is designed as a porous tip to serve as the spray source for injection to the mass spectrometry. All the necessary processes for pretreatment and analysis of a sample are accomplished in one injection, including aptamer affinity-based microextraction, CE separation and MS detection of analytes. AFB1 and OTA are simultaneously determined in a wide linear range with sample consumption of only 1 μL and the limit-of-detection as low as 1 pg/mL. The microextraction column exhibits excellent repeatability and stability, which can be used over 45 runs within a month with CE separation efficiency and only MS intensity slightly decreased. Mycotoxins in three kinds of cereal based infant foods are accurately analyzed using the proposed method. The study provides a robust and universal approach that would have potential applications in a variety of analytical fields based on selective molecular recognition coupling to CE-MS analysis.

Recent Progress in Electrochemical Nano-Biosensors for Detection of Pesticides and Mycotoxins in Foods

Pesticide and mycotoxin residues in food are concerning as they are harmful to human health. Traditional methods, such as high-performance liquid chromatography (HPLC) for such detection lack sensitivity and operation convenience. Efficient, accurate detection approaches are needed. With the recent development of nanotechnology, electrochemical biosensors based on nanomaterials have shown solid ability to detect trace pesticides and mycotoxins quickly and accurately. In this review, English articles about electrochemical biosensors in the past 11 years (2011-2022) were collected from PubMed database, and various nanomaterials are discussed, including noble metal nanomaterials, magnetic metal nanoparticles, metal-organic frameworks, carbon nanotubes, as well as graphene and its derivatives. Three main roles of such nanomaterials in the detection process are summarized, including biomolecule immobilization, signal generation, and signal amplification. The detection targets involve two types of pesticides (organophosphorus and carbamate) and six types of mycotoxins (aflatoxin, deoxynivalenol, zearalenone, fumonisin, ochratoxin A, and patulin). Although significant achievements have been made in the evolution of electrochemical nano-biosensors, many challenges remain to be overcome.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

A facile aptamer immobilization strategy to fabricate a robust affinity monolith for highly specific in-tube solid-phase microextraction

Developing a functional affinity monolithic column towards in-tube solid-phase microextraction (IT-SPME) for selective sample pretreatment is critical. Herein, a high-performance capillary affinity monolithic column with an ultra-high aptamer coverage density was rapidly fabricated via a simple adsorption strategy, in which aptamers with natural sequences were directly immobilized on an ammonium-based strongly cationic matrix. Limitations of the traditional biological or covalent methods such as time-consuming modification reactions, special requirement of active groups (e.g. -NH₂ and -SH) on the aptamer, and low aptamer coverage density levels were avoided. An ultra-high coverage density of 8616 pmol μL^-1 was achieved with excellent stability, and the highest aptamer-modification level among all the current methods was reached. Selective recognition and high recovery yields of the model mycotoxin ochratoxin A (OTA) were achieved in 95.9 ± 0.98%-97.9 ± 0.28% (n = 3). In particular, there was little cross-reactivity towards the OTB analogue of only 0.5% even in the case of 250 fold of the analogue OTB, which was not reported in previous affinity monoliths. Upon sample analysis, satisfactory discriminations of trace OTA were obtained at 93.7 ± 1.4%-95.5 ± 2.5% (n = 3) in beer and wheat. A facile and direct method for efficiently fabricating an aptamer-based affinity monolith towards online selective IT-SPME was proposed.

The Role of Aryldiazonium Chemistry in Designing Electrochemical Aptasensors for the Detection of Food Contaminants

Food safety monitoring assays based on synthetic recognition structures such as aptamers are receiving considerable attention due to their remarkable advantages in terms of their ability to bind to a wide range of target analytes, strong binding affinity, facile manufacturing, and cost-effectiveness. Although aptasensors for food monitoring are still in the development stage, the use of an electrochemical detection route, combined with the wide range of materials available as transducers and the proper immobilization strategy of the aptamer at the transducer surface, can lead to powerful analytical tools. In such a context, employing aryldiazonium salts for the surface derivatization of transducer electrodes serves as a simple, versatile and robust strategy to fine-tune the interface properties and to facilitate the convenient anchoring and stability of the aptamer. By summarizing the most important results disclosed in the last years, this article provides a comprehensive review that emphasizes the contribution of aryldiazonium chemistry in developing electrochemical aptasensors for food safety monitoring.

Identification of a New DNA Aptamer by Tissue-SELEX for Cancer Recognition and Imaging

Cancer has become one of the most common diseases with high mortality in humans. Early and accurate diagnosis of cancer is of great significance to enhance the survival rate of patients. Therefore, effective molecular ligands capable of selectively recognizing cancer are urgently needed. In this work, we identified a new DNA aptamer named SW1 by tissue-based systematic evolution of ligands by exponential enrichment (tissue-SELEX), in which cancerous liver tissue sections were used as the positive control and adjacent normal liver tissue sections were used as the negative control. Taking immobilized liver cancer SMMC-7721 cells as the research object, aptamer SW1 exhibited excellent affinity with a K_d value of 123.62 ± 17.53 nM, and its binding target was preliminarily determined as a non-nucleic acid substance in the nucleus. Moreover, tissue imaging results showed that SW1 explicitly recognized cancerous liver tissues with a high detection rate of 72.7% but displayed a low detection rate to adjacent normal tissues. In addition to liver cancer cells and tissues, aptamer SW1 has been demonstrated to recognize various other types of cancer cells and tissues. Furthermore, SW1-A, an optimized aptamer of SW1, maintained its excellent affinity toward liver cancer cells and tissues. Collectively, these results indicate that SW1 possesses great potential for use as an effective molecular probe for clinical diagnosis of cancer.

Critical Assessment of Mycotoxins in Beverages and Their Control Measures

Mycotoxins are secondary metabolites of filamentous fungi that contaminate food products such as fruits, vegetables, cereals, beverages, and other agricultural commodities. Their occurrence in the food chain, especially in beverages, can pose a serious risk to human health, due to their toxicity, even at low concentrations. Mycotoxins, such as aflatoxins (AFs), ochratoxin A (OTA), patulin (PAT), fumonisins (FBs), trichothecenes (TCs), zearalenone (ZEN), and the alternaria toxins including alternariol, altenuene, and alternariol methyl ether have largely been identified in fruits and their derived products, such as beverages and drinks. The presence of mycotoxins in beverages is of high concern in some cases due to their levels being higher than the limits set by regulations. This review aims to summarize the toxicity of the major mycotoxins that occur in beverages, the methods available for their detection and quantification, and the strategies for their control. In addition, some novel techniques for controlling mycotoxins in the postharvest stage are highlighted.

An aptamer affinity column for purification and enrichment of lactoferrin in milk

As an active glycoprotein with high nutritional value, lactoferrin is widely used in food and medical treatment. Therefore, it is very important to establish an accurate and efficient detection method for lactoferrin. At present, the detection of lactoferrin in milk faces many challenges, such as low separation degree and poor parallelism. To address this issue, we developed an aptamer affinity column (AAC) for purification and enrichment of lactoferrin in milk. The column was prepared by covalent conjugation of an amino-modified aptamer with NHS-activated Sepharose. The washing buffer type (0.01 mol/L phosphate buffer) and volume (10 mL) and the sodium chlorideconcentration (1 mol/L) in the elution buffer were optimized for the AAC method. The performance of the AAC was then evaluated in terms of the column capacity, specificity, stability, and reusability. The column capacity was 500 ± 13.7 μg and the column could be reused up to ten times with a large loss in performance. The AAC method combined with high-performance liquid chromatography gave excellent linearity over a wide range, good sensitivity with a limit of detection of 3 μg/mL, and acceptable recoveries for different concentrations of lactoferrin spiked in real raw milk samples from cattle. Finally, the AAC was successfully applied to analyze lactoferrin in milk. This method could be applied to routine analysis of samples for lactoferrin in testing laboratories and dairy factories.

Aptasensor for Quantification of Leptin Through PCR Amplification of Short DNA-Aptamers

Protein quantification is traditionally performed through enzyme-linked immunosorbent assay (ELISA), which involves long preparation times. To overcome this, new approaches use aptamers as an alternative to antibodies. In this paper, we present a new approach to quantify proteins with short DNA aptamers through polymerase chain reaction (PCR) resulting in shorter protocol times with comparatively improved limits of detection. The proposed method includes a novel way to quantify both the target protein and the corresponding short DNA-aptamers simultaneously, which also allows us to fully characterize the performance of aptasensors. Human leptin is used as a target protein to validate this technique, because it is considered an important biomarker for obesity-related studies. In our experiments, we achieved the lowest limit of detection of 100 pg/mL within less than 2 h, a limit affected by the dissociation constant of the leptin aptamer, which could be improved by selecting a more specific aptamer. Because of the simple and inexpensive approach, this technique can be employed for Lab-On-Chip implementations and for rapid "on-site" quantification of proteins.

Recent progress in determination of ochratoxin a in foods by chromatographic and mass spectrometry methods

Ochratoxin A is a highly toxic mycotoxin and has posed great threat to human health. Due to its serious toxicity and wide contamination, great efforts have been made to develop reliable determination methods. In this review, analytical methods are comprehensively summarized in terms of sample preparation strategy and instrumental analysis. Detailed method is described according to the food commodities in the order of cereal, wine, coffee, beer, cocoa, dried fruit and spice. This review mainly focuses on the recent advances, especially reported in the last decade. At last, challenges and perspectives are also discussed to achieve better advancement and promote practical application in this field.

Immunoaffinity Extraction and Alternative Approaches for the Analysis of Toxins in Environmental, Food or Biological Matrices

The evolution of instrumentation in terms of separation and detection allowed a real improvement of the sensitivity and analysis time. However, the analysis of ultra-traces of toxins in complex samples requires often a step of purification and even preconcentration before their chromatographic analysis. Therefore, immunoaffinity sorbents based on specific antibodies thus providing a molecular recognition mechanism appear as powerful tools for the selective extraction of a target molecule and its structural analogs to obtain more reliable and sensitive quantitative analysis in environmental, food or biological matrices. This review focuses on immunosorbents that have proven their efficiency in selectively extracting various types of toxins of various sizes (from small mycotoxins to large proteins) and physicochemical properties. Immunosorbents are now commercially available, and their use has been validated for numerous applications. The wide variety of samples to be analyzed, as well as extraction conditions and their impact on extraction yields, is discussed. In addition, their potential for purification and thus suppression of matrix effects, responsible for quantification problems especially in mass spectrometry, is presented. Due to their similar properties, molecularly imprinted polymers and aptamer-based sorbents that appear to be an interesting alternative to antibodies are also briefly addressed by comparing their potential with that of immunosorbents.

A signal-on electrochemical aptasensor based on silanized cellulose nanofibers for rapid point-of-use detection of ochratoxin A

An innovative ultrasensitive electrochemical aptamer-based sensor was developed for ochratoxin A (OTA) detection in cold brew coffee through revolutionary combination of nanofibers, electrochemical method, and aptamer technologies. The assembly of the aptasensor was based on the activation of silanized cellulose nanofibrous membranes as a supporting matrix for methylene blue (MB) redox probe-labeled aptamer tethering. Cellulose nanofibrous membranes were regenerated by deacetylating electrospun cellulose acetate nanofibrous membranes with deacetylation efficacy of 97%, followed by silanization of the nanofiber surfaces by using (3-aminopropyl)triethoxysilane (APTES). A replacement of conventionally casted membranes by the nanofibrous membranes increased the active surface area on the working electrode of a screen-printed three-electrode sensor by more than two times, consequently enhancing the fabricated aptasensor performance. The developed aptasensor demonstrated high sensitivity and specificity toward OTA in a range 0.002-2 ng mL^-1, with a detection limit of 0.81 pg mL^-1. Moreover, the assembled aptamer-based sensor successfully detected OTA in cold brew coffee samples without any pretreatment. The aptasensor exhibited good reusability and stability over long storage time. Graphical abstract.

An overview and future prospects on aptamers for food safety

Introduction

Many bacteria are responsible for infections in humans and plants, being found in vegetables, water, and medical devices. Most bacterial detection methods are time-consuming and take days to give the result. Aptamers are a promising alternative for a quick and reliable measurement technique to detect bacteria present in food products. Selected aptamers are DNA or RNA oligonucleotides that can bind with bacteria or other molecules with affinity and specificity for the target cells by the SELEX or cell-SELEX technique. This method is based on some rounds to remove the non-ligand oligonucleotides, leaving the aptamers specific to bind to the selected bacteria. Compared with conventional methodologies, the detection approach using aptamers is a rapid, low-cost form of analysis.

Objective

This review summarizes obtention methods and applications of aptamers in the food industry and biotechnology. Besides, different techniques with aptamers are presented, which enable more effective target detection.

Conclusion

Applications of aptamers as biosensors, or the association of aptamers with nanomaterials, may be employed in analyses by colorimetric, fluorescence, or electrical devices. Additionally, more efficient ways of sample preparation are presented, which can support food safety to provide human health, with a low-cost method for contaminant detection.

Key points • Aptamers are promising for detecting contaminants outbreaks. • Studies are needed to identify aptamers for different targets.

Rapid and sensitive detection of mycotoxins by advanced and emerging analytical methods: A review

Quantification of mycotoxins in foodstuffs is extremely difficult as a limited amount of toxins are known to be presented in the food samples. Mycotoxins are secondary toxic metabolites, made primarily by fungal species, contaminating feeds and foods. Due to the presence in globally used grains, it is an unpreventable problem that causes various acute and chronic impacts on human and animal health. Over the previous few years, however, progress has been made in mycotoxin analysis studies. Easier techniques of sample cleanup and advanced chromatographic approaches have been developed, primarily high-performance liquid chromatography. Few extremely sophisticated and adaptable tools such as high-resolution mass spectrometry and gas chromatography-tandem MS/MS have become more important. In addition, Immunoassay, Advanced quantitative techniques are now globally accepted for mycotoxin analysis. Thus, this review summarizes these traditional and highly advance methods and their characteristics for evaluating mycotoxins.

Aptamer-functionalized chitosan magnetic nanoparticles as a novel adsorbent for selective extraction of ochratoxin A

The preparation and application of aptamer-functionalized chitosan magnetic nanoparticles (Fe₃O₄@CTS@Apt nanoparticles) for selective extraction and determination ochratoxin A (OTA) were described in this study. Magnetic nanoparticle was synthesized by the coprecipitation method followed by coating with chitosan to improve its stability and biocompatibility. Further characterization was performed by scan electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and magnetic property measurement, and the results clearly indicated that the obtained magnetic chitosan nanoparticle was composed of magnetic core and chitosan coating layer. Aptamers specific to OTA were coupled onto the magnetic chitosan nanoparticles, and an extraction procedure was developed by optimization. When challenged with food samples fortified with OTA at 5 and 10 μg/kg, recoveries ranging from 91.3% to 99.1% with relative standard deviation (RSD) ≤ 4.2% were achieved by aptamer-functionalized magnetic extraction, which is very close to the results obtained by immunoaffinity chromatography extraction, indicating that this magnetic adsorbent could be hopefully used to achieve a fast and efficient extraction and detection of OTA in food samples.

Simultaneous electrochemical determination of ochratoxin A and fumonisin B1 with an aptasensor based on the use of a Y-shaped DNA structure on gold nanorods

A complementary DNA (cDNA) was designed to simultaneously hybridize with the ochratoxin A (OTA) aptamer and the fumonisin B1 (FB1) aptamer to form a unique Y-shaped DNA structure and to achieve simultaneous detection. Gold nanorods (AuNRs) were used to immobilize thionine (Th), thiolated ferrocene (Fc), thiolated OTA aptamer (Apt1), and thiolated FB1 aptamer (Apt2), to form an amplified signal element and a recognition element. The Apt1-AuNRs-Th complex and the Apt2-AuNRs-Fc complex hybridize with cDNA to form a unique Y-DNA structure on a gold electrode. This produces two initial electrochemical signals [with 177 μΑ cm^-2 near -0.2 V, and 3121 μΑ cm^-2 near +0.46 V (vs. Ag/AgCl)] by differential pulse voltammetry. Upon addition of 0.1 ng mL^-1 OTA and 0.1 ng mL^-1 FB1, the aptamers bind the two toxins. This results in the release of Apt1-AuNRs-Th and Apt2-AuNRs-Fc, so the peak currents densities decrease to 115 μΑ cm^-2 and 209 μΑ cm^-2. The assay allows simultaneous determination of OTA and FB1 in the 1.0 pg·mL^-1 to 100 ng·mL^-1 concentration ranges, with LODs of 0.47 and 0.26 pg·mL^-1. The assay is reproducible, stable and specific. It was applied to the determination of OTA and FB1 in spiked beer, with recoveries between 89.0% and 102.0%. Graphical abstractSchematic representation of OTA and FB₁ detection based on Apt₂-AuNRs-Fc/Apt₁-AuNRs-Th/cDNA/AuE. (AuNRs: Gold nanorods; Th: thionine; Fc: ferrocene; SH: thiol; BSA: Bovine serum albumin; cDNA: Complementary DNA; Apt₁: Aptamer1; Apt₂: Aptamer2; OTA: Ochratoxin A; FB₁: Fumonisin B₁).

An aptamer affinity column for purification and enrichment of aflatoxin B1 and aflatoxin B2 in agro-products

We have developed an aptamer affinity column (AAC) for the purification and enrichment of trace aflatoxin B₁ (AFB₁) and aflatoxin B₂ (AFB₂) in genuine agro-products through the covalent conjugation of amino modified aptamer and NHS-activated Sepharose. The coupling and working conditions found to be suitable for this AFB-AAC were examined in regard to coupling time (2 min), loading volume (30 mL), and the methanol concentration (< 10%) used in the loading step. The performance of AFB-AAC was then further evaluated in terms of capacity (329.1 ± 13.7 ng for AFB₁ and 162.5 ± 8.9 ng for AFB₂), selectivity (excellent), reusability (twenty-three times for AFB₁ and twelve times for AFB₂), and repeatability (92.7% ± 2.9% for AFB₁ and 71.5% ± 3.4% for AFB₂). Furthermore, the AAC clean-up combined with HPLC-FLD demonstrated excellent linearity over a wide range, good sensitivity with an LOD of 50 pg mL^-1 for AFB₁ and 15 pg mL^-1 for AFB₂, and acceptable recovery with different spiking levels in different matrices. Finally, the AAC was successfully applied to analyte AFB₁ and AFB₂ in four types of agro-products as well as a maize flour reference material, and the results were found to be in accordance with those of commercial IACs. This study provides a reference for the analysis of other trace analytes by merely changing the corresponding aptamer and represents a strong contender for immune affinity columns. Graphical abstract An aptamer affinity column for purification and enrichment of aflatoxin B₁ and aflatoxin B₂ in agro-products with the aid of HPLC-FLD and a post-column photochemical derivatization reactor.

Aptamer assisted ultrafiltration cleanup with high performance liquid chromatography-fluorescence detector for the determination of OTA in green coffee

One of the most common mycotoxin contaminating feed and foodstuffs is Ochratoxin A (OTA). OTA has a chronic toxic effect and proved to be mutagenic, nephrotoxic, teratogenic, immunosuppressive, and carcinogenic. Aptamer with their specific affinity for OTA was used in this paper to create an analytical technique. Several methods have been reported for the determination of OTA in foods. However, most of these methods could not be applied to a complex food as green coffee because the interfering native fluorescent products made the quantification very difficult. In this work, we mixed two separations based techniques to identify and quantify OTA in green coffee. Aptamer assisted ultrafiltration as separation technique based on the size of molecules was applied to separate the free OTA, the quantification of OTA was established by a high-performance liquid chromatography (HPLC-FD) with a limit of detection (LOD) of 0.05 ng/mL for OTA. Artificially contaminated green coffee displayed a good range of OTA recoveries up to 97.7%. This method can be applied to the quantitative determination of OTA in green coffee at levels below the maximum levels proposed by the European Commission for green coffee. It also confirm that aptamers can be used as biorecognition element in diagnostic assays with commercial application for mycotoxin analysis.

Identification and Application of an Aptamer Targeting Papillary Thyroid Carcinoma Using Tissue-SELEX

Aptamers, short DNA or RNA oligonucleotides, which evolved from systematic evolution of ligands by exponential enrichment (SELEX), can perform specific target recognition. Papillary thyroid carcinoma (PTC) is of high incidence worldwide, and the prognosis of advanced PTC is poor. Up to now, there is no specific biomarker that can identify PTC and defects still remain in existing diagnostic methods. Here we report an aptamer, termed TC-6, which is generated from tissue-SELEX by using sections of papillary thyroid carcinoma and a normal thyroid gland. TC-6 could specifically target intracellular components of papillary thyroid cells with high affinity ( K_d = 57.66 ± 5.93 nmol/L) and have performed excellent biocompatibility both in vivo and in vitro. Moreover, fluorescence imaging of PTC tumor-bearing mice revealed that TC-6 was able to accumulate in tumor sites and could distinguish thyroid carcinoma from other benign thyroid diseases efficiently. In addition, TC-6d, a truncated aptamer of TC-6, maintained its affinity toward PTC with K_d of 39.20 ± 8.20 nmol/L. Overall, these results indicate that TC-6 is a potential candidate for developing novel tools for diagnosis and targeted therapy of PTC.

Recent progress in the development of recognition bioelements for polychlorinated biphenyls detection: Antibodies and aptamers

Polychlorinated biphenyls (PCBs) are persistent pollutants, which have expanded in foods and the environment. Detection of PCBs is considered essential due to recognized side-effects of PCBs on health and the public concerns in this regard. On the other hand, due to the trace levels of these organic chlorine compounds, reliable and sensitive assays must be developed. Recognition elements are essential parts of analytical detection assays and sensors of PCBs since these elements are involved in the selective identification of the analytes of interest. Understanding the fundamentals of the recognition elements of PCBs and the benefits of the sensor strategies result in the development of next-generation recognition devices. This review aimed to highlight the recent progress in the recognition elements as key parts of biosensors. We initially, focused on the developed antibody-based biosensors for the detection of PCBs, followed by discussing the aptamers as novel recognition elements. Furthermore, the recent advancement in the development of aptamer-based solid phase extractions has been evaluated. These findings could contribute to improving the design of commercial PCB-kits in the future.

Highly hydrophilic polyhedral oligomeric silsesquioxane (POSS)-containing aptamer-modified affinity hybrid monolith for efficient on-column discrimination with low nonspecific adsorption

A highly hydrophilic aptamer-modified POSS-containing hybrid affinity monolith is presented for efficient on-column discrimination with low non-specific adsorption.

A facile AuNPs@aptamer-modified mercaptosiloxane-based hybrid affinity monolith with an unusually high coverage density of aptamer for on-column selective extraction of ochratoxin A

A convenient and high-performance AuNPs@aptamer-modified mercaptosiloxane-based hybrid affinity monolithic column with an unusually high coverage density of aptamers was facilely prepared and used for on-column selective recognition of ochratoxin A (OTA). Due to the high surface-to-volume ratio of AuNPs, the robust conjugation of Au-SH and large specific surface area of hybrid-silica monolith, high coverage density of 5'-SH-aptamers up to 3494 pmol μL-1 was achieved, which was 2.5-10 folds higher than that of other previously reported affinity monoliths modified with AuNPs@Apt. Using OTA as the model analyte, the highly selective recognition of OTA was carried out via online coupling with HPLC, and the cross-reactivity towards analogues, such as OTB and aflatoxin B1, was weak. High recovery yields of OTA were achieved at more than 92% (n = 3) even when OTB was added at a high concentration level up to 50 ng mL-1. For sample analysis, efficient discrimination of OTA was successfully obtained with a sensitive detection limit of 25 pg mL-1. The recoveries of OTA with different fortified levels were achieved at 88.6%-94.1% and 88.2%-94.3% for beer and wine samples, respectively. This protocol provides a facile approach for fabricating a desirable affinity monolith modified with abundant aptamers for highly selective and sensitive on-column extraction of target analyte OTA.

Aptamer-modified magnetic metal-organic framework MIL-101 for highly efficient and selective enrichment of ochratoxin A

A facile and efficient strategy is developed to modify aptamers on the surface of the magnetic metal-organic framework MIL-101 for the rapid magnetic solid-phase extraction of ochratoxin A. To the best of our knowledge, this is the first attempt to create a robust aptamer-modified magnetic MIL-101 with covalent bonding for the magnetic separation and enrichment of ochratoxin A. The saturated adsorption of ochratoxin A by aptamer-modified magnetic MIL-101 was 7.9 times greater than that by magnetic metal-organic framework MIL-101 due to the former's high selective recognition as well as good stability. It could be used for extraction more than 12 times with no significant changes in the extraction efficiency. An aptamer-modified magnetic MIL-101-based method of magnetic solid-phase extraction combined with ultra high performance liquid chromatography with tandem mass spectrometry was developed for the determination of trace ochratoxin A with limit of detection of 0.067 ng/L. Ochratoxin A of 4.53-13.7 ng/kg was determined in corn and peanut samples. The recoveries were in the range 82.8-108% with a relative standard deviation (n = 5) of 4.5-6.5%. These results show that aptamer-modified magnetic MIL-101 exhibits selective and effective enrichment performance and have excellent potential for the analysis of ultra-trace targets from complex matrices.

Aptamer-based polyhedral oligomeric silsesquioxane (POSS)-containing hybrid affinity monolith prepared via a "one-pot" process for selective extraction of ochratoxin A

A novel aptamer-based polyhedral oligomeric silsesquioxane (POSS)-containing hybrid affinity monolith has been prepared with a facile "one-pot" process simultaneously via "free radical polymerization" and "thiol-ene" click reaction, and used for on-line selective extraction and practical analysis to trace ochratoxin A (OTA). By using the ternary porogenic mixture composed of water/DMF/PEG, a homogeneous polymerization mixture with POSS chemicals, acrylate-based monomers and aptamer aqueous solution was obtained, and the copolymerization of POSS chemicals, polymer monomers and aptamer aqueous solution was systematically studied. Characterizations such as the morphology, FT-IR and fluorescence spectra, mechanical stability, dynamic binding capacity, cross-reactivity and selectivity of the resultant affinity monolith were also evaluated. Attributed to the porous monolithic structure and aptamer-based affinity interaction, acceptable selective recognition and recovery yields towards trace OTA were obtained. With a 5-fold volume enrichment, the limit of detection (LOD) and limit of quantitation (LOQ) of OTA in fortified beer samples were gained at 0.025 ng/mL (S/N = 3) and 0.045 ng/mL (S/N = 10), respectively. It could be competent for the sensitive measure of actual OTA residues in real beer samples. In comparison with the previously reported strategies containing common "sol-gel" chemistry, the proposed protocol to fabricating aptamer-modified POSS-containing hybrid affinity monolith showed a simpler preparation with acceptable selectivity and higher recovery to trace OTA.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

An aptamer@AuNP-modified POSS–polyethylenimine hybrid affinity monolith with a high aptamer coverage density for sensitive and selective recognition of ochratoxin A

A new POSS-based aptamer affinity hybrid monolith, Apt@AuNPs@POSS–PEI, with a well-controlled 3D skeletal structure and a high aptamer coverage density of up to 1413 pmol μL⁻¹ has been facilely fabricated.

A novel aptasensor for the colorimetric detection of S. typhimurium based on gold nanoparticles

A simple, fast and convenient colorimetric aptasensor was fabricated for the detection of Salmonella typhimurium (S. typhimurium) which was based on the color change effect of gold nanoparticles (GNPs). S. typhimurium is one of the most common causes of food-associated disease. Aptamers with specific recognition toward S. typhimurium was modified to the surface of prepared GNPs. They play a role for the protection of GNPs from aggregation toward high concentrations of NaCl. With the addition of S. typhimurium, aptamers preferably combined to S. typhimurium and the protection effect was broken. With more S. typhimurium, more aptamers detached from GNPs. In such a situation, the exposed GNPs would aggregated to some extent with the addition of NaCl. The color changed from red, purple to blue which could be characterized by UV-Vis spectrophotometer. The absorbance spectra of GNPs redshifted constantly and the intensity ratio of A700/A521 changed regularly. This could be calculated for the basis of quantitative detection of S. typhimurium from 10²cfu/mL to 10⁷cfu/mL. The obtained linear correlation equation was y=0.1946x-0.2800 (R²=0.9939) with a detection limit as low as 56cfu/mL. This method is simple and rapid, results in high sensitivity and specificity, and can be used to detect actual samples.

Preparation of a Specific ssDNA Aptamer for Brevetoxin-2 Using SELEX

The existing assays for detecting brevetoxin (BTX) depend on expensive equipment with a professional operator or on an antibody with limited stability, which requires complex processes, a high cost, and a considerable amount of time. The development of an alternative detection probe is another promising research direction. This paper reports the use of aptamers binding to BTX-2 in an analytical assay using the systematic evolution of ligands by exponential enrichment (SELEX). After 12 rounds of selection, the secondary structures of 25 sequences were predicted. Compared to other aptamers, Bap5 has relatively high affinity with the lowest dissociation constant of 4.83 μM, and IC₅₀ is 73.81 ng mL^-1. A good linear regression formula of y = 30.688x - 7.329 with a coefficient correlation of R² = 0.9798 was obtained using a biotin-avidin ELISA. Moreover, there is no cross-reaction with the detected marine toxins, except for BTX-2. Thus, Bap5 has potential to detect BTX-2 in shellfish in the future as a substitute for the recognition probe.

Selective tools for the solid-phase extraction of Ochratoxin A from various complex samples: immunosorbents, oligosorbents, and molecularly imprinted polymers

The evolution of instrumentation in terms of separation and detection has allowed a real improvement of the sensitivity and the analysis time. However, the analysis of ultra-traces of toxins such as ochratoxin A (OTA) from complex samples (foodstuffs, biological fluids…) still requires a step of purification and of preconcentration before chromatographic determination. In this context, extraction sorbents leading to a molecular recognition mechanism appear as powerful tools for the selective extraction of OTA and of its structural analogs in order to obtain more reliable and sensitive quantitative analyses of these compounds in complex media. Indeed, immunosorbents and oligosorbents that are based on the use of immobilized antibodies and of aptamers, respectively, and that are specific to OTA allow its selective clean-up from complex samples with high enrichment factors. Similar molecular recognition mechanisms can also be obtained by developing molecularly imprinted polymers, the synthesis of which leads to the formation of cavities that are specific to OTA, thus mimicking the recognition site of the biomolecules. Therefore, the principle, the advantages, the limits of these different types of extraction tools, and their complementary behaviors will be presented. The introduction of these selective tools in miniaturized devices will also be discussed.

Homogeneous electrochemical detection of ochratoxin A in foodstuff using aptamer-graphene oxide nanosheets and DNase I-based target recycling reaction

A simple and feasible homogeneous electrochemical sensing protocol was developed for the detection of ochratoxin A (OTA) in foodstuff on the immobilization-free aptamer-graphene oxide nanosheets coupling with DNase I-based cycling signal amplification. Thionine-labeled OTA aptamers were attached to the surface of nanosheets because of the strong noncovalent binding of graphene oxide nanosheets with nucleobases and aromatic compounds. The electronic signal was acquired via negatively charged screen-printed carbon electrode (SPCE) toward free thionine molecules. Initially, the formed thionine-aptamer/graphene nanocomposites were suspended in the detection solution and far away from the electrode, thereby resulting in a weak electronic signal. Upon addition of target OTA, the analyte reacted with the aptamer and caused the dissociation of thionine-aptamer from the graphene oxide nanosheets. The newly formed thionine-aptamer/OTA could be readily cleaved by DNase I and released target OTA, which could retrigger thionine-aptamer/graphene nanocomposites with target recycling to generate numerous free thionine molecules. Free thionine molecules were captured by negatively charged SPCE, each of which could produce an electrochemical signal within the applied potentials. Under optimal conditions, graphene-based aptasensing platform could exhibit good electrochemical responses for the detection of OTA at a concentration as low as 5.6pg/mL. The reproducibility, precision and selectivity of the system were acceptable. Importantly, the method accuracy was comparable with commercialized OTA ELISA kit when using for quantitative monitoring of contaminated wheat samples.

Recent Advances for the Detection of Ochratoxin A

Ochratoxin A (OTA) is one of the mycotoxins secreted by Aspersillus and Penicillium that can easily colonize various grains like coffee, peanut, rice, and maize. Since OTA is a chemically stable compound that can endure the physicochemical conditions of modern food processing, additional research efforts have been devoted to develop sensitive and cost-effective surveillance solutions. Although traditional chromatographic and immunoassays appear to be mature enough to attain sensitivity up to the regulation levels, alternative detection schemes are still being enthusiastically pursued in an attempt to meet the requirements of rapid and cost-effective detections. Herein, this review presents recent progresses in OTA detections with minimal instrumental usage, which have been facilitated by the development of OTA aptamers and by the innovations in functional nanomaterials. In addition to the introduction of aptamer-based OTA detection techniques, OTA-specific detection principles are also presented, which exclusively take advantage of the unique chemical structure and related physicochemical characteristics.

Aptamer-functionalized stir bar sorptive extraction coupled with gas chromatography-mass spectrometry for selective enrichment and determination of polychlorinated biphenyls in fish samples

In this paper, a novel aptamer-functionalized stir bar sorptive extraction (SBSE) was developed for selective enrichment of the low abundance polychlorinated biphenyls (PCBs) from fish samples. This approach was based on the immobilization of aptamer which could recognize 2,3',5,5'-tetrachlorobiphenyl (PCB72) and 2',3',4',5,5'-pentachlorobiphenyl (PCB106) on one kind of metal-organic frameworks (Zn4O(BDC)3, MOF-5). MOF-5 as a substrate was prepared by potential-controlled cathodic electrodeposition on stainless steel. This aptamer-functionalized stir bar sorptive extraction (Apt-MOF SBSE) fiber could be facile synthesized in one-step. PCB72 and PCB106 were employed as target analytes for selective extraction by the developed method. The adsorbed targets could be desorbed easily in pH 3.0 100mM glycine-HCl buffers and then extracted by the methylene chloride. Afterwards, the detection was carried out with gas chromatography-tandem mass spectrometry (GC-MS). The Apt-MOF SBSE pretreatment coupled with GC-MS exhibited high selectivity, good binding capacity, stability and reproducibility for the detection of PCBs. It provided a linear range of 0.02-250ngmL(-1) with a good coefficient of determination (R(2)=0.9991-0.9996) and the detection limit was 0.003-0.004ngmL(-1). More importantly, the method was successfully utilized for the determination of PCBs in fish samples with good enrichment factor (1930-2304). Therefore, this new SBSE coating opens up the possibility of selective enrichment of a given target PCBs from complex fish samples.

Colorimetric aptasensing of ochratoxin A using Au@Fe3O4 nanoparticles as signal indicator and magnetic separator

Gold nanoparticles (Au NPs) doped Fe3O4 (Au@Fe3O4) NPs have been synthesized by a facile one-step solvothermal method. The peroxidase-like activity of Au@Fe3O4 NPs was effectively enhanced due to the synergistic effect between the Fe3O4 NPs and Au NPs. On this basis, an efficient colorimetric aptasensor has been developed using the intrinsic dual functionality of the Au@Fe3O4 NPs as signal indicator and magnetic separator. Initially, the amino-modified aptamer specific for a typical mycotoxin, ochratoxin A (OTA), was surface confined on the amino-terminated glass beads surafce using glutaraldehyde as a linker. Subsequently, the amino-modified capture DNA (cDNA) was labeled with the amino-functionalized Au@Fe3O4 NPs and the aptasensor was thus fabricated through the hybridization reaction between cDNA and the aptamers. While upon OTA addition, aptamers preferred to form the OTA-aptamer complex and the Au@Fe3O4 NPs linked on the cDNA were released into the bulk solution. Through a simple magnetic separation, the collected Au@Fe3O4 NPs can produce a blue colored solution in the presence of 3,3',5,5'-tetramethylbenzidine and H2O2. When the reaction was terminated by addition of H(+) ions, the blue product could be changed into a yellow one with higher absorption intensity. This colorimetric aptasensor can detect as low as 30 pgmL(-1) OTA with high specificity. To the best of our knowledge, the present colorimetric aptasensor is the first attempt to use the peroxidase-like activity of nanomaterial for OTA detection, which may provide an acttractive path toward routine quality control of food safety.

Analytical methods for determination of mycotoxins: An update (2009-2014)

Mycotoxins are a problematic and toxic group of small organic molecules that are produced as secondary metabolites by several fungal species that colonise crops. They lead to contamination at both the field and postharvest stages of food production with a considerable range of foodstuffs affected, from coffee and cereals, to dried fruit and spices. With wide ranging structural diversity of mycotoxins, severe toxic effects caused by these molecules and their high chemical stability the requirement for robust and effective detection methods is clear. This paper builds on our previous review and summarises the most recent advances in this field, in the years 2009-2014 inclusive. This review summarises traditional methods such as chromatographic and immunochemical techniques, as well as newer approaches such as biosensors, and optical techniques which are becoming more prevalent. A section on sampling and sample treatment has been prepared to highlight the importance of this step in the analytical methods. We close with a look at emerging technologies that will bring effective and rapid analysis out of the laboratory and into the field.

Man-Made Synthetic Receptors for Capture and Analysis of Ochratoxin A

Contemporary analytical methods have the sensitivity required for Ochratoxin A detection and quantification, but direct application of these methods on real samples can be rarely performed because of matrix complexity. Thus, efficient sample pre-treatment methods are needed. Recent years have seen the increasing use of artificial recognition systems as a viable alternative to natural receptors, because these materials seem to be particularly suitable for applications where selectivity for Ochratoxin A is essential. In this review, molecularly imprinted polymers, aptamers and tailor-made peptides for Ochratoxin A capture and analysis with particular attention to solid phase extraction applications will be discussed.

Development of an aptasensor based on a fluorescent particles-modified aptamer for ochratoxin A detection

The presented work reports a generic fluorescent aptasensing design employing carboxy-modified fluorescent particles as a signal-generating probe and magnetic particles as a solid separation support. Carboxy-modified fluorescent particles were used to modify the aptamer and act as a signal-generating probe. Magnetic beads were used as an immobilization surface to perform the function of a solid separation support. As a proof of concept, the assay was used to detect ochratoxin A (OTA). Fluorescent detection based on the displacement and competition format was performed, and the obtained results were compared. The competition-based assays were characterized with improved analytical characteristics as compared to those based on the displacement principle. The competitive fluorescent assays showed a high sensitivity where the detection limit and IC50 were 0.005 and 7.2 nM respectively. The aptasensing platform was finally demonstrated for the detection of OTA in a beer sample. However, this is a generic approach that can be very easily extended to other matrixes to determine OTA. Additionally, the proposed concept of fluorescent particles as a signal-generating probe in combination with magnetic particles can also be integrated to other fluorescent-based affinity assays.

Simultaneous detection of ochratoxin A and fumonisin B1 in cereal samples using an aptamer-photonic crystal encoded suspension array

A simple, new aptamer-photonic crystal encoded suspension array was designed to simultaneously quantify and qualify ochratoxin A(OTA) and fumonisin B1(FB1) in cereal samples. The aptamers of OTA and FB1 were immobilized on the surfaces of photonic crystals by chemical bonding. When the target mycotoxins appear in a sample, the fluorescence-labeled complementary DNA of the aptamer dissociates from their double DNA hybrid and results in an obvious decrease in fluorescence intensity of the microsphere. The difference value of fluorescent intensities for each kind of silica photonic crystal microsphere (SPCM) quantitatively conveys the concentration of mycotoxin, and the structure colors or reflectance peak positions of the SPCMs confirm the kind of mycotoxin detected. The reaction conditions including the immobilization method for aptamers, hybridization, and incubation conditions have been optimized. This developed method displayed a wide linear detection range (0.01-1 ng/mL for OTA and 0.001-1 ng/mL for FB1) and a low limit of detection (0.25 pg/mL for OTA and 0.16 pg/mL for FB1). The recovery rates in the spiked cereal samples ranged from 81.80% to 116.38% for OTA and 76.58%-114.79% for FB1. The positive detection results in the naturally contaminated cereal samples were in agreement with those of classic enzyme-linked immunosorbent assay (ELISA). This simple suspension array scheme displays a great application potential for the high throughput screen assay of mycotoxins.