Structural characteristics and physicochemical properties of lotus seed resistant starch prepared by different methods

An intelligent aerogel composed of anthocyanins, natural fiber, carboxymethyl cellulose, and sodium alginate for monitoring fish freshness

This study aimed to develop a natural colorimetric aerogel based on carboxymethyl cellulose (CMC), sodium alginate (SA), black goji anthocyanin (BGA), and various natural fibers such as cotton fiber (CF), silk fiber (SF), and down fiber (DF) via a combined approach of ionic gelation and freeze drying for monitoring fish freshness. Various colorimetric aerogels, (CMC/SA, CMC/SA/CF, CMC/SA/SF, and CMC/SA/DF) were developed and analyzed. Among them, CMC/SA aerogel showed higher density (0.054 g/cm3) with no surface pores, while CMC/SA/SF had a large surface area (18.6214 m2/g) with uniformly higher porosity (97.11 %) and a lower density (0.024 g/cm3). Moreover, the CMC/SA/SF aerogel exhibited greater mechanical properties and color sensitivity at various pH compared to other aerogels, which was then used as an indicator label for monitoring fish freshness during storage at 4 °C and 25 °C. The label aerogel became blue from purple, when the values of TVB-N, TVC, and pH reached 32.92 and 26.91 mg/100 g, 9.41 × 107 and 8.7 × 107 CFU/g, and 6.99 and 7.15 at 4 and 25 °C, respectively, exhibiting the level of fish deterioration. Taken together, the CMC/SA/SF colorimetric aerogel shows great potential for application as an intelligent package in monitoring the freshness of fish.

Effect of carboxymethyl cellulose and/or wheat gluten on the pasting, rheological and quality properties of wheat starch-based batter for deep-fried products

This study aimed to investigate the effects of the individual and synergistic addition of wheat gluten (WG) and carboxymethyl cellulose (CMC) on the wheat starch (WS)-based batter characteristics to determine the molecular basis of texture formation in the actual batter system. Results showed that adding WG and/or CMC significantly increased the viscosity of WS during pasting. The rheological behavior showed that the WG-treated and CMC-treated group had the highest and lowest viscoelasticity. The addition of WG-CMC helped the WS-based batter obtain moderate viscoelasticity. These outcomes could be attributed to the enhancement of hydrogen bonding. The microstructure suggested that the addition of WG-CMC increased the density and integrity of the gel network. Overall, CMC competed for the binding sites of WG on WS, reducing the increase in viscoelasticity caused by the interaction between WG and WS. This might alleviate the unwanted springiness of fried products.

Recent developments in enzymatic preparation, physicochemical properties, bioactivity, and application of resistant starch type III from staple food grains

Resistant starch (RS) was classified into five types and referred to the starch that cannot be digested and absorbed by the small intestine of healthy human beings. Among them, RS3 has received a lot of attention from researchers because of its good functional properties and greater application prospects. Meanwhile, the enzymatic method is widely used in the preparation of RS3 because of its high efficiency and environmental protection. α-Amylase and pullulanase as the main enzymes can effectively improve the yield of RS3. The physical properties of RS3 have an excellent potential for application in improving food crispness, texture and producing low glycemic index (GI) foods. It is more valuable because it has biological activities such as inducing apoptosis in tumor cells, lowering intestinal pH, and regulating blood glucose, etc. This paper summarized the current research progress of RS3 from different staple food grains, including current applications of enzymes commonly used in the preparation of RS3, physical properties and biological activities of RS3, and the application of RS3 in different areas to provide a theoretical basis for future research on RS3 as well as further development and applications based on the market requirement.

Tailoring enzyme modified starch through high-moisture extrusion: Unraveling structure-property relationships

The conventional method of producing enzyme modified starch (ES) involves using a dilute starch suspension, which necessitated substantial heat expenditure for drying the product and resulted in significant energy waste. Improved extrusion cooking technology (IECT) could extrude materials under high moisture, and it is a new physical modification technology. A comprehensive investigation was undertaken to produce enzyme modified starch (ES) with varying dextrose equivalent (DE) using IECT. The study systematically explored the effects of different screw speeds on the resulting IECT-ES properties. And principal component analysis and artificial neural network analysis were used to explore the correlation between data and the synaptic weight relationships. Results indicated that Maltese cross of IECT-ES disappeared, the R1047/1022 and R995/1022 decreased to 0.7305 and 0.9012 respectively, the full width at half maximum at 480 cm-1 increased to 26.81 %, light transmittance increased to 21.20 % and DE value rose to 14.19 % at 300 rpm. The properties evolution of IECT-ES was closely related to changes in structure and conditions. This study aimed to evaluate the effectiveness of IECT as an alternative method for producing enzyme modified starch. The findings provide valuable insights into more energy-efficient starch modification processes.

A mechanistic study of chestnut starch retrogradation and its effects on in vitro starch digestion

Starch retrogradation is a mechanism that is associated with the quality of starch-based food products. A thorough understanding of chestnut starch retrogradation behavior plays an important role in maintaining the quality of chestnut foods during processing and storage. In this study, we investigated the effects of storage time on the structural properties and in vitro digestibility of gelatinized chestnut starch by using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and solid-state 13C nuclear magnetic resonance (NMR). The results showed that the long-range crystallinity and short-range molecular order of retrograded chestnut starch first rapidly increased from 3 h to 3 d and then decreased from 3 d to 7 d, followed by a slight increase from 7 d to 14 d with retrogradation. With the extension of storage time at 4 °C, there were generally obvious increases in single and double helical structures, which were stacked into long-term ordered structure, resulting in increased enthalpy changes as detected by differential scanning calorimetry spectroscopy (DSC) and reduction of the digestion rate of retrograded chestnut starch. Overall, this study may provide important implications for manipulating and improving the quality of chestnut foods.

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

High-Resistant Starch Based on Amylopectin Cluster via Extrusion: From the Perspective of Chain-Length Distribution and Structural Formation

Resistant starch (RS) has the advantage of reshaping gut microbiota for human metabolism and health, like glycemic control, weight loss, etc. Among them, RS3 prepared from pure starch is green and safe, but it is hard to achieve structural control. Here, we regulate the crystal structure of starch with different chain-length distributions (CLDs) via extrusion at low/high shearing levels. The change in CLDs in extruded starch was obtained, and their effects on the fine structure (Dm, dBragg, dLorentz, degree of order and double helix, degree of crystal) of RS and its physicochemical properties were investigated by SAXS, FTIR, XRD and 13C NMR analyses. The results showed that the RS content under a 250 r/min extrusion condition was the highest at 61.52%. Furthermore, the crystalline system induced by high amylopectin (amylose ≤ 4.78%) and a small amount of amylose (amylose ≥ 27.97%) was favorable for obtaining a high content of RS3-modified products under the extruding environment. The control of the moderate proportion of the A chains (DP 6-12) in the starch matrix was beneficial to the formation of RS.

The mediation mechanism of calcium ions on black bean type 3 resistant starch: Metabolomics, structure characteristics and digestibility

The type 3 resistant starch (RS3) is beneficial for blood glucose management. A high quality RS3 was provided and its formation mechanism after calcium ion (Ca2+) treatment was investigated in this study. The metabolomics, structure and digestion properties were evaluated. Metabolomics was performed by untargeted UHPLC-Q-TOF/MS, and a total of 11 significantly different metabolites was found. The NMR, ATR-FTIR, and XRD results showed that the degree of double helix decreased from 5.34 to 1.07, crystallinity decreased from 33.58 % to 19.88 %, and the amorphous region increased from 69.76 % to 78.33 %. Large particle polymers were observed by SEM on the granule surface of starch with Ca2+ treatment. Digestion test showed that Ca2+ increased the RS3 from 9.70 % to 22.26 %. The result indicated that Ca2+ induced the formation of chelates between Ca2+ and -OH, promoted the RS3 content and regulated carbohydrate metabolism. The study provided theoretical basis for producing low-glycemic black bean foods.

Structural analysis of type 3 resistant starch from Canna edulis during in vitro simulated digestion and its post-digested residue impact on human gut microbiota

Introduction

Resistant starch (RS) has garnered attention for its health benefits, including modulating the gut microbiota and promoting the production of short-chain fatty acids (SCFAs).

Methods

This study investigates structural changes of type 3 resistant starch from Canna edulis (CE) during in vitro simulated digestion and explores its health-relevant properties using healthy individuals' fecal microbiota.

Results

CE, prepared with a RS content of 59.38%, underwent a comprehensive analysis employing X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). During simulated digestion, XRD analysis demonstrated a significant rise in CE's relative crystallinity from 38.92 to 49.34%. SEM illustrated the transition of CE from a smooth to a rough surface, a notable morphological shift. Post-digestion, CE was introduced into microbial fermentation. Notably, propionic acid and valeric acid levels significantly increased compared to the control group. Furthere more, beneficial Bifidobacterium proliferated while pathogenic Escherichia-Shigella was suppressed. When comparing CE to the well-known functional food fructo-oligosaccharide (FOS), CE showed a specific ability to support the growth of Bifidobacterium and stimulate the production of short-chain fatty acids (SCFAs) without causing lactic acid accumulation.

Discussion

CE demonstrates potential as a functional health food, with implications for gut health enhancement and SCFAs production.

Comparison of anti-allergic activities of different types of lotus seed resistant starch in OVA-induced mouse model

Currently, evidence from observational studies suggests dietary fiber intake may be associated with decreased risk of food allergy. As a type of dietary fiber, resistant starch was also widely reported to possess anti-allergic properties. However, there is a relative paucity of studies assessing the influence of resistant starch types on their anti-allergic activity and its possible underlying mechanisms. In the current study, the anti-allergic effects of RS3-type (retrograded starch), RS4-type (chemically modified starch, cross-bonded), and RS5-type (starch-palmitic acid complex) of lotus seed resistant starch were evaluated in the OVA (100 mg/kg)-induced food allergic mice model. The results showed that oral administration of RS3 or RS4 lotus seed resistant starch (0.3 g/100 g b.w.) for 25 days significantly improved adverse symptoms of food allergy such as weight loss, increases in allergy symptom score and diarrhea rate; with significant reduction of serum specific antibody IgE, TNF-α, IL-4 levels and improved Th1/Th2 balance being observed. The mechanism may involve the regulation of lotus seed resistant starch on intestinal flora and the metabolites short-chain fatty acids and bile acids. Taken together, the findings may enhance understanding towards ameliorative effects of resistant starch on food allergy, and offer valuable insights for the exploration of novel anti-allergic bioactive compounds.

Effect of lotus seed resistant starch on the bioconversion pathway of taurocholic acid by regulating the intestinal microbiota

Taurocholic acid (TCA) is abundant in the rat intestine and has multiple health benefits. In the gut, intestinal microbiota can transform TCA into different bile acid (BA) derivatives, with the composition of microbiota playing a crucial role in the transformation process. This study aims to investigate how lotus seed resistant starch (LRS) can regulate microbiota to influence BA transformation. A fecal fermentation study was conducted in vitro, using either LRS, high-amylose maize starch (HAMS), or glucose (GLU) to analyze microbiota composition, BA content, and metabolic enzyme activities over different fermentation times. Bioinformatics analysis found that LRS increased the relative abundance of Enterococcus, Bacillus, and Lactobacillus, and decreased Escherichia-Shigella, compared with HAMS and GLU. LRS also reduced total BA content and accelerated the conversion of TCA to cholic acid, deoxycholic acid, and other derivatives. These results reveal that LRS and GLU tend to mediate the dehydroxy pathway, whereas HAMS tends to secrete metabolic enzymes in the epimerization pathway. Therefore, the evidence that LRS may regulate TCA bioconversion may benefit human colon health research and provide an important theoretical basis, as well as offer new concepts for the development of functional foods.

Effects of frying on the surface oil absorption of wheat, potato, and pea starches

The effects of structural changes on surface oil absorption characteristics of wheat starch, pea starch and potato starch during frying under different water content (20%, 30%, 40%, 50%) were studied. Fried potato starch with a 40% water content exhibited the highest surface oil content. When the initial moisture content reached 30%, the scattering intensity of the crystal layer structure decreased for wheat and pea starches, while the scattering peak for potato starch completely disappeared. At 40% moisture content, the amorphous phase ratio values for fried potato, wheat and pea starches were 13.50%, 11.78% and 11.24%, respectively, and the nitrogen adsorption capacity of fried starch decreased in turn. These findings that the structure of potato starch was more susceptible to degradation compared to pea starch and wheat starch, resulting in higher surface oil absorbed by potato starch during frying process.

Research Progress in Modifications, Bioactivities, and Applications of Medicine and Food Homologous Plant Starch

Starchy foods are an essential part of people's daily diet. Starch is the primary substance used by plants to store carbohydrates, and it is the primary source of energy for humans and animals. In China, a variety of plants, including edible medicinal plants, such as Pueraria root, yam tuber and coix seed, are rich in starch. However, limited by their inherent properties, kudzu starch and other starches are not suitable for the modern food industry. Natural starch is frequently altered by physical, chemical, or biological means to give it superior qualities to natural starch as it frequently cannot satisfy the demands of industrial manufacturing. Therefore, the deep processing market of modified starch and its products has a great potential. This paper reviews the modification methods which can provide excellent functional, rheological, and processing characteristics for these starches that can be used to improve the physical and chemical properties, texture properties, and edible qualities. This will provide a comprehensive reference for the modification and application of starch from medicinal and edible plants.

Structural, physicochemical properties and noodle-making potential of quinoa starch and type 3, type 4, and type 5 quinoa resistant starch

This study prepared type 3, type 4, and type 5 quinoa resistant starch (QRS3, QRS4, and QRS5) from quinoa starch (QS), compared their structural and physicochemical properties and evaluated their noodle-making potential. The results showed that the molecular weight of QRS3 decreased, the number of short-chain molecules increased, and its crystal type changed to B-type after gelatinization, enzymatic hydrolysis, and retrogradation. QRS4 is a phosphorylated cross-linked starch, with a surface morphology, particle size range, and crystal type similar to QS, but displaying modified thermodynamic properties. QRS5 is a complex of amylose and palmitic acid. It displays typical V-type crystals, mainly composed of long chain molecules and primarily exhibits a block morphology. The noodles prepared by replacing 20 % wheat flour with QS, QRS3 and QRS5 have higher hardness and are suitable for people who like elasticity and chewiness. QRS4 noodles are softer and suitable for people like elderly and infants who prefer soft foods. In conclusion, significant differences were evident between the fine structures, crystal types, physicochemical properties and potential applications of QS and the three QRSs. The results may expand the application of QS and QRS in the food and pharmaceutical industries.

Effect of structural characteristics of resistant starch prepared by various methods on microbial community and fermentative products

Resistant starch (RS) has been extensively studied because of its beneficial effects on gut microbiota. In this study, four RSs obtained through various preparation processes were utilized for in vitro fermentation, and their structural characteristics before and after fermentation were determined using chromatography, Fourier infrared spectroscopy, and scanning electron microscopy (SEM). It was observed that these RSs can be classified into two categories based on their fermentation and structural features. The autoclaving RS (ARS) and extruding RS (ERS) were classified as Class I Microbiome Community (MC-I), characterized by a higher proportion of butyrate and its producers, including unclassified_g_Megasphaera and Megasphaera elsdenii. While microwaving RS (MRS) and ultrasound RS (URS) belonged to Class II Microbiome Community (MC-II), marked by a higher proportion of acetate and its producer, Bifidobacterium pseudocatenulatum DSM 20438. MC-I had a lower molecular weight, shorter chain length, more chains with degree of polymerization (DP) 36-100, and a more ordered structure than MC-II. Furthermore, SEM observations revealed distinct degradation patterns between MC-I and MC-II, which may be attributed to their surface structural characteristics. These findings imply that the preparation methods employed for RS can determine its multilevel structural characteristics, and consequently influence its physiological properties.

Effect of microwave followed by cooling on structural and digestive properties of pinhão starch

To increase its resistant content, native pinhão starch was modified using a microwave (300 W, 90 s) and subsequently cooled at 4 °C for 4, 8, 16, 24, and 72 h. The results demonstrated that all starches exhibited a crystalline structure of type C, with decreased crystallinity after modification. In the modified samples, the ratio of peaks 1047/1022 cm-1 and 995/1022 cm-1, as identified by FTIR, indicated a reduction in the crystalline region and damage to the double helix structure of starch granules. DSC analysis revealed that modified starches had lower gelatinization temperature range values due to the presence of more homogeneous crystals. Rheological analyses showed that starch suspensions obtained exhibited pseudoplastic fluid behavior and gel-like viscoelastic structure formation, with higher storage moduli in samples with longer cooling times. The microwave-modified starch, cooled for 72 h, exhibited higher digestion resistance, resulting in a 43.6 % increase in resistant starch content and a 26.1 % decrease in rapidly digestible starch compared to native starch. The results highlight that the modification of native pinhão starch using a microwave, followed by cooling at 4 °C for 72 h, presents a promising method for increasing the resistant starch content.

Physicochemical, thermal, pasting, morphological, functional and bioactive binding characteristics of starches of different oat varieties of North-Western Himalayas

Starches were isolated from five oat varieties (SFO-1, SFO-3, Sabzar, SKO-20 and SKO-96) grown in North-Western Himalayas of India. Moisture content of the varieties ranged from 9.25 ± 0.09 to 13.21 ± 0.11 %, indicating their shelf-stability. Results suggested >90 % purity of starches as was evident from values of ash, proteins, and lipids. Amylose content results showed that all starches fall within category of intermediate-amylose starches. Lambdamax, blue value and OD620/550 were found significantly (p ≤ 0.05) higher in SKO-20. Sabzar exhibited higher starch hydrolysis percentage of 85.16 % whereas, lowest was observed in SKO-20 (78.12 %). Degree of syneresis was higher in SKO-20 however, its freeze-thaw stability was lesser. Wide peak in FTIR spectra at 3320 cm-1 confirms nature of starches. SKO-20 exhibited significantly higher onset gelatinization temperature (65.19 ± 1.06 °C) and enthalpy (15.78 ± 0.15 J/g) whereas, Sabzar exhibited lowest enthalpy. Pasting characteristics indicated lowest and highest final viscosity in SKO-20 (341.30 ± 2.11 mPas) and SKO-96 (1470 ± 4.56 mPas), respectively. SEM results indicated irregular and polygonal shape of starches with size <10 μm. SKO-20 exhibited lowest disintegration time of 2.08 ± 0.01 min and Sabzar showed highest (3.31 ± 0.07 min). SKO-20 released more curcumin (71.28 %) whereas, Sabzar released less. This suggests that SKO-20 could be used as better excipient for delivery of curcumin at target site.

Synergistic modification of ultrasound and bamboo leaf flavonoid on the rheological properties, multi-scale structure, and in vitro digestibility of pea starch

In this study, the effect of ultrasonic treatment (UT), bamboo leaf flavonoid (BLF), ultrasonic treatment prior to bamboo leaf flavonoid (UT-BLF), and bamboo leaf flavonoid prior to the ultrasonic treatment (BLF-UT) on the rheological properties, multi-scale structure, and digestibility of pea starch (PS) were investigated. The morphology and crystal structure of starch granules were destroyed by UT, thereby promoting starch retrogradation and digestion. The binding between BLF and starch through hydrophobic interactions and hydrogen bonds inhibited the interaction between starch molecular chains and impaired their double helix structure, thus effectively retarding starch retrogradation. The anti-digestibility of starch was enhanced after synergistic treatment. Compared with single treatment, synergistic treatment increased the ordered structure and gelatinization enthalpy of starch. In comparison with the UT-BLF group, the viscoelastic and thermal stability of BLF-UT group were improved with the increase in ordered structure. This study could provide valuable information for PS modification.

Effect of improved extrusion cooking technology (IECT) on structure, physical properties and in vitro digestibility of starch

Extrusion can modify the structure and physical properties of starch, while the extent of improved extrusion cooking technology (IECT) affects the starch with high moisture content and different crystal types remaining unclear. Therefore, the influence of IECT at different screw speeds on the structure, physical properties and in vitro digestibility of corn (A-type), potato (B-type) and pea (C-type) starches with high moisture content (42 %) was explored. Results indicated that IECT treatment caused similar variations on structure, physical properties, and in vitro digestibility of the 3 types of starches. The contents of slowly digestible starch (SDS) and resistant starch (RS) decreased by IECT treatment, accompanied by a reduction of crystallinity, enthalpy of gelatinization, gelatinization temperature and viscosity, while the content of rapidly digestible starch (RDS) and the ratio of bound water increased. And the changes in in vitro digestibility of starch were closely related to the damage to starch structure caused by IECT. Furthermore, most of starch granules were in the agglomeration stage by appropriate IECT treatment, which induced the exposure of a great quantity of enzyme binding sites to enhance the in vitro digestibility.

Cross-linked modifications of starches from colored highland barley and their characterizations, digestibility, and lipolysis inhibitory abilities in vitro

To promote the stability and functionality of native starch from colored highland barley (CHBS), the cross-linked modifications with sodium trimetaphosphate (STMP)/sodium tripolyphosphate (STPP) and citric acid were conducted to prepare CHB resistant starches (CHRSs), whose physicochemical characteristics, digestibility, and lipolysis inhibitory potential were also assessed. Results showed that the resistant starch amounts in CHBS were significantly increased after cross-linking and differed slightly among CHRSs. Citric acid modification of CHBS resulted in significantly higher amylose amounts, solubilities, swelling powers, and water-binding capacities than those under STMP/STPP modification within the cultivars (p < 0.05), with their crystalline patterns of A-type (white and blue) and CB-type (black). STMP/STPP modified CHBS exhibited higher degrees of crystalline regions with B-type crystalline patterns. Due to the differences in structural properties and structure-based morphology, STMP/STPP cross-linked CHBS showed lower digestibility and citric acid cross-linked CHBS exhibited higher lipolysis inhibitory activities. Besides, the cross-linked modifications demonstrated more enhancements in functionalities of starches from white and blue cultivars than black cultivar.

Insights into the changes of structure and digestibility of microwave and heat moisture treated quinoa starch

In this study, quinoa starch was subjected to microwave and heat moisture treatment (MHT) with various moisture content (15 %, 25 %, 35 %) and microwave power (4.8, 9.6, 14.4 W/g), and its structure and digestibility were investigated. SEM and particle size analysis indicated that MHT caused the agglomeration of starch granules and increased the particle size. Moreover, MHT increased the short-range order structure and relative crystallinity, except for MHT with moisture content (35 %). DSC results demonstrated that the gelatinization temperature and gelatinization enthalpy had a slight improvement after MHT. Moreover, MHT increased the amylose content to some extent. It was worth noting that the digestibility of quinoa starch significantly decreased. After MHT, a part of rapidly digestible starch (RDS) was converted into slowly digestible starch (SDS) or resistant starch (RS). Particularly, when moisture content was 25 %, the starch had a highest SDS + RS content. Thus, this study provided a potential approach using MHT to modulate the digestibility of starch.

Gut microbiota-metabolic axis insight into the hyperlipidemic effect of lotus seed resistant starch in hyperlipidemic mice

We investigated the hyperlipidemic effect of different doses of lotus seed resistant starch (low-, medium and high-dose LRS, named as LLRS, MLRS and HLRS, respectively) in hyperlipidemic mice using gut microbiota-metabolic axis compared to high-fat diet mice (model control group, MC). Allobaculum was significantly decreased in LRS groups compared to MC group, while MLRS promoted the abundance of norank_f_Muribaculaceae and norank_f_Erysipelotrichaceae. Moreover, supplementation of LRS promoted cholic acid (CA) production and inhibited deoxycholic acid compared to MC group. Among, LLRS promoted formic acid, MLRS inhibited 20-Carboxy-leukotriene B4, while HLRS promoted 3, 4-Methyleneazelaic acid and inhibited Oleic acid and Malic acid. Finally, MLRS regulate microbiota composition, and this promoted cholesterol catabolism to form CA, which inhibited serum lipid index by gut microbiota-metabolic axis. In conclusion, MLRS can promote CA and inhibit medium chain fatty acids, so as to play the best role in lowering blood lipids in hyperlipidemia mice.

Modification of Starches and Flours by Acetylation and Its Dual Modifications: A Review of Impact on Physicochemical Properties and Their Applications

Various modification treatments have been carried out to improve the physicochemical and functional properties of various types of starch and flour. Modification by acetylation has been widely used to improve the quality and stability of starch. This review describes the effects of acetylation modification and its dual modifications on the physicochemical properties of starch/flour and their applications. Acetylation can increase swelling power, swelling volume, water/oil absorption capacity, and retrogradation stability. The dual modification of acetylation with cross-linking or hydrothermal treatment can improve the thermal stability of starch/flour. However, the results of the modifications may vary depending on the type of starch, reagents, and processing methods. Acetylated starch can be used as an encapsulant for nanoparticles, biofilms, adhesives, fat replacers, and other products with better paste stability and clarity. A comparison of various characteristics of acetylated starches and their dual modifications is expected to be a reference for developing and applying acetylated starches/flours in various fields and products.

Influences of high hydrostatic pressure on structures and properties of mung bean starch and quality of cationic starch

It is difficult to improve the quality of chemical-modified starch by traditional technology. Hence, in this study, mung bean starch with poor chemical activity was used as raw material, the native starch was treated and the cationic starch was prepared under high hydrostatic pressure (HHP) at 500 MPa and 40 °C. By studying the changes in the structure and properties of native starch after HHP treatment, the influence mechanism of HHP on improving the quality of cationic starch was analyzed. Results showed high pressure could make water and etherifying agent enter the starch granules through pores, and HHP made the structure of starch undergone three stages similar to mechanochemical effect. After HHP treated for 5 and 20 min, the degree of substitution, reaction efficiency and other qualities of cationic starch increased remarkably. Hence, proper HHP treatment could help to improve the chemical activity of starch and quality of cationic starch.

Physicochemical Characterizations, Digestibility, and Lipolysis Inhibitory Effects of Highland Barley Resistant Starches Prepared by Physical and Enzymatic Methods

This study aimed to investigate the differences in the physicochemical and structural characteristics, digestibility, and lipolysis inhibitory potential in vitro of highland barley resistant starches (HBRSs) prepared by autoclaving (HBSA), microwave-assisted autoclaving (HBSM), isoamylase (HBSI) and pullulanase (HBSP) debranching modifications. Results revealed that the resistant starch content of native starch was significantly elevated after modifications. HBSA and HBSM showed distinctly higher swelling power and water-binding capacities along with lower amylose amounts and solubilities than those of HBSI and HBSP (p < 0.05). Fourier transform infrared spectroscopy and X-ray diffraction exhibited that HBSP displayed the highest degree of the ordered crystalline region and crystallinity with a mixture of C_B- and V-type polymorphs. Meanwhile, HBSA and HBSM were characterized by their high degree of the amorphous region with a mixture of B- and V-type polymorphs. Physical and enzymatic modifications resulted in different functionalities of HBRSs, among which HBSP showed the lowest digestibility and HBSM exhibited the highest inhibitory activity on lipolysis due to their structure and structure-based morphology and particle size. This study provided significant insights into the development of native starch from highland barley as an alternative functional food.

Effect of Pullulanase Debranching Time Combined with Autoclaving on the Structural, Physicochemical Properties, and In Vitro Digestibility of Purple Sweet Potato Starch

The effects of pullulanase debranching combined with autoclaving (PDA) at various debranching times (0 h, 5 h, 10 h, 15 h, 20 h, and 25 h) and 121 °C/20 min of autoclave treatment on the structural and physicochemical characteristics of purple sweet potato (Jinshu No.17) starch were investigated. The results indicated that the native starch (NS) was polygonal, round, and bell-shaped with smooth surfaces. After debranching treatment, the surface of the starch samples became rough and irregular. The molecular weight became smaller after treatments. X-ray diffraction C-type pattern was transformed into a B-type structure in treated samples with increased relative crystallinity. ¹³C NMR indicated an increased propensity for double helix formation and new shift at C1, 3, 5 region compared to NS. The apparent amylose content was 21.53% in the NS. As the swelling power decreased, the percentage of soluble solids increased and different thermal properties were observed. A higher yield of the resistant starch (RS) was observed in all treated starch except PDA 25 h. The findings of our study reveal that a combination of pullulanase debranching time (15 h) and autoclaving (121 °C for 20 min) is a great technique that can be used to produce a higher amount of resistant starch in the Jinshu No.17 starch.

Thermal properties of different types of starch: A review

Starch is present in high amount in various cereals, fruits and roots & tubers which finds major application in industry. Commercially, starch is rarely consumed or processed in its native form, thus modification of starch is widely used method for increasing its application and process stability. Due to the high demand for starch in industrial applications, researchers were driven to hunt for new sources of starch, including modification of starch through green processing. Thermal properties are significant reference parameters for evaluating the quality of starch when it comes to cooking and processing. Modification of starches affects the thermal properties, which are widely studied using Differential scanning calorimeter or Thermogravimetric analysis. It could lead to a better understanding of starch's thermal properties including factors influencing and expand its commercial applications as a thickener, extender, fat replacer, etc. in more depth. Therefore, the review presents the classification of starches, factors influencing the thermal properties, measurement methods and thermal properties of starch in its native and modified form. Further, this review concludes that extensive research on the thermal properties of new sources of starch, as well as modified starch, is required to boost thermal stability and extend industrial applications.

Structural, physicochemical and rheological properties of starches isolated from banana varieties (Musa spp.)

•

High starch content in green banana can be extracted for industry and avoid waste.

•

Banana starch from Tanzania was rich in amylose and resistant starch.

•

Banana starch paste presented great structural stability.

•

Banana starch had potential to produce edible films and replace chemical binder.

Banana starches were isolated from five banana varieties in Tanzania to analyze the proximate composition, structure, physicochemical and rheological properties. The amylose content of banana starches was 29.92 ± 0.17 %–39.50 ± 0.08 % and the resistant starch content of cooked banana starches ranged from 44.74 ± 1.72 % to 55.43 ± 1.52 %. Banana starch granules presented irregular shapes with particle size of 21.73 to 24.67 μm and showed B-type or C-type crystalline patterns with crystallinity of 36.69 % to 41.83 %. The solubility and the swelling power were 2.5 ± 0.42 %–4.4 ± 0.57 % and 11.27 ± 0.04 %–12.48 ± 0.71 %, respectively. Mzuzu and Malindi starches possessed lower gelatinization temperature. The high gelatinization peak viscosity (2248 ± 67–2897 ± 71 cP), low breakdown (556 ± 7–960 ± 41 cP) and low setback (583 ± 29–864 ± 118 cP) indicated banana starch could replace chemically cross-linked starch for applications that require stable viscosity. The rheological analysis showed that banana starches exhibited shear thinning behavior and had great processing adaptability. The results all above will provide basic data for the development and utilization of banana starch.

Effect of dual modification with citric acid combined with ultrasonication on hydrolysis kinetics, morphology and structure of corn starch dispersions

Corn starch dispersions (CSD) were hydrolyzed with citric acid and compared with CSD co-treated with citric acid combined with ultrasonication for 1 to 18 days, which are designated as single modification (CSD-SM) and dual modification (CSD-DM), respectively. The logistic functions monitor the dynamics of the hydrolysis advance (%) of the CSD-SM and CSD-DM as a function of time, where the zones most vulnerable to the single-treatment and/or co-treatment of the corn starch granules (CSG) are the amorphous or disordered regions. The characterization results of CSD-DM suggest that the structural changes caused by dual modification affected the morphology, sequence, and microstructure of the CSG. The heterogeneous changes caused by the dual modification changed the configuration of the CSG, generating a kind of destemming of the amorphous lamellae (depolymerization), an increase in the percentage of relative crystallinity of the CSD-DM and an active rearrangement of the intralamellar chains that promoted the relative amount of double helix for 18 days of double modification. The synergistic effect of the dual modification for CSD by the sequential combination of a chemical treatment followed by a physical one improved the hydrolyzed advance by 12 %, the relative crystallinity by 10 %, and the promotion of double helices by 25 % during 18 days of co-treatment.

Effect of Physical and Enzymatic Modifications on Composition, Properties and In Vitro Starch Digestibility of Sacred Lotus (Nelumbo nucifera) Seed Flour

In this study, native lotus seed flour (N-LSF) was modified by different methods, namely, partial gelatinization (PG), heat−moisture treatment (HMT), or pullulanase treatment (EP). Their composition, functional properties, starch composition, and estimated glycemic index (eGI) were compared. PG contained similar protein, soluble dietary fiber, and insoluble dietary fiber contents to N-LSF, while those of HMT and EP differed from their native form. PG increased rapid digestible starch (RDS) but decreased resistant starch (RS); while HMT and EP increased amylose and RS contents to 34.57−39.23% and 86.99−92.52% total starch, respectively. Such differences led to the different pasting properties of the modified flours rather than PG, which was comparable to the native flour. HMT had limited pasting properties, while EP gave the highest viscosities upon pasting. The eGI of all samples could be classified as low (<50), except that of PG, which was in the medium range (60). It was plausible that lotus seed flour modified either with HMT or EP could be used as carbohydrate source for diabetes patients or health-conscious people.

Lotus seed resistant starch ameliorates high-fat diet induced hyperlipidemia by fatty acid degradation and glycerolipid metabolism pathways in mouse liver

We investigated the potential efficacy and underlying mechanisms of Lotus seed Resistant Starch (LRS) for regulating hyperlipidemia in mice fed a High-fat Diet (HFD). Mouse were fed a normal diet (Normal Control group, NC group), HFD alone (MC group), HFD plus lovastatin (PC group), or HFD with low/medium/high LRS (LLRS, MLRS, and HLRS groups, respectively) for 4 weeks. LRS supplementation significantly decreased body weight and significantly reduced serum levels of total cholesterol, triglycerides, low-density lipoprotein cholesterol, and high-density lipopro-tein cholesterol compared with the MC group. LRS also significantly alleviated hepatic steatosis, especially in the MLRS group, which also showed a significantly reduced visceral fat index. LLRS supplementation significantly regulated genes associated with glycerolipid metabolism and steroid hormone biosynthesis (Lpin1 and Ugt2b38), MLRS significantly regulated genes related to fatty acid degradation, fatty acid elongation, and glycerolipid metabolism (Lpin1, Hadha, Aldh3a2, and Acox1), whereas HLRS significantly regulated genes related to fatty acid elongation and glycerolipid metabolism (Lpin1, Elovl3, Elovol5, and Agpat3). The fatty acid-degradation pathway regulated by MLRS thus exerts better control of serum lipid levels, body weight, visceral fat index, and liver steatosis in mice compared with LLRS- and HLRS-regulated pathways.

Difference in the adhesion of Bifidobacterium breve to lotus seed resistant starch is attributable to its structural performance conferred by the preparation method

Resistant starch (RS) is a kind of important carbon source for colonic microorganisms. Its structure-function relationship is helpful to understand the mechanism of dietary nutrition in the body. In this paper, lotus seed resistant starches (LRS) prepared by microwave-power method (MP-LRS3-1 and MP-LRS3-2) and water-bath method (WB-LRS3-1 and WB-LRS3-2) were used to determine the structural changes and establish their nutritional interactions with Bifidobacterium breve. The results showed that four types all formed scale- and gully-like surface microstructures, B-type crystal structures, and lightly variable double helix structures. However, greater diffraction peak intensity was observed of MP-LRS3 at 18° and 19° compared with WB-LRS3, and higher crystallinity and tighter double helix were detected in MP-LRS3-1 than others. Meanwhile, MP-LRS3-1 showed the most effective proliferation promoting capability and highest adhesion value to B. breve. It might be related to specific surface microstructure and crystallinity differences of LRS caused by different preparing methods. There was also a positive correlation between the adhesion and the ability to promote proliferation, and it could be speculated this structural difference makes MP-LRS3-1 having highest adhesion ability and the most proliferative effect. This result can provide theoretical bases for improving the metabolism and probiotic action of RS.

Fabrication and characterization of bamboo shoot cellulose/sodium alginate composite aerogels for sustained release of curcumin

The feasibility of using unmodified bamboo shoot cellulose (BSC) to produce composite aerogels with sodium alginate (SA) in a fast and green way for sustained release of curcumin was explored for the first time, in which calcium ion-induced SA cross-linking could effectively retain the structural stability of aerogel skeleton. The aerogels were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry. The encapsulation and release of curcumin from aerogels were studied while the antioxidant activity of encapsulated curcumin was investigated. Curcumin was evenly encapsulated in the composite aerogels and showed a sustained release behavior, followed the first-order rate expression. Interpenetrating network structures were built between BSC and SA mainly through hydrogen bonding, which could be further reinforced by the cross-linking of CaCO₃ on the SA matrix. The original characteristics of BSC in the composite aerogels were well retained. The thermal stability and mechanical properties of the composite aerogels were improved by Ca²⁺-induced cross-linking, while the uncross-linked composite aerogels exhibited better encapsulation efficiency and in vitro antioxidant activity. Overall, this study was the first to use cellulose from bamboo shoot to develop aerogels for drug delivery purposes. The cellulose/alginate composite aerogels were promising to be used as biocompatible carriers for drug and nutraceutical delivery.

Effects of treatment methods on the formation of resistant starch in purple sweet potato

In order to determine the mechanisms underlying resistant starch formation, three treatments were used to prepare resistant starch from purple sweet potato. The resistant starch yield, amylose content, chain length distribution, thermal properties, and crystal structure were determined, and the results were compared with those of unmodified starch. Autoclaving, pullulanase, and pullulanase-autoclaving treatments significantly increased the resistant starch yield, amylose content, shorter amylopectin branch content, and gelatinisation temperatures of native purple sweet potato starch. Resistant starch prepared via pullulanase-autoclaving combination treatment exhibited the highest gelatinisation enthalpy value and the greatest degree of overall thermal stability. X-ray diffraction patterns and Fourier-transform infrared spectra analysis demonstrated that all three treatments transformed the starch crystalline structure from C-type to B-type, and no new groups were generated during the modification process; all the processes were only physical modifications.

A comprehensive review of the factors influencing the formation of retrograded starch

The retrogradation of starch is an inevitable change that occurs in starchy food during processing and storage, in which gelatinized starch rearranges into an ordered state. The chain length, proportion and structure of amylose and amylopectin vary in different types of starch granules, and the process is affected by the genes and growth environment of plants. The internal factors play a significant role in the formation of retrograded starch, while the external factors have a direct impact on its structural rearrangement, and the creation of suitable conditions enables food components to affect the rearrangement of starch. Interestingly, water not only directly affects the gelatinization and retrogradation of starch, but also serves as a bridge to deliver the influence of other components that influence retrogradation. Moreover, there are three mechanisms responsible for forming retrograded starch: the migration of starch molecular chains in the starch-water mixed system, the redistribution of water molecules, and the recrystallization kinetics of gelatinized starch. In this paper, the effects of internal factors (amylose, amylopectin, food ingredients) and external factors (processing conditions) on the formation of retrograded starch and the mechanism controlling these effects are reviewed.

Lotus seeds (Nelumbinis semen) as an emerging therapeutic seed: A comprehensive review

Nelumbinis semen is commonly known as lotus seeds that have been used as a vegetable, functional food, and medicine for 7,000 years. These are low caloric, a rich source of multiple nutrients and bioactive constituents, which make it a unique therapeutic food. N. semen plays an important part in the physiological functions of the body. Nowadays, people are more conscious about their health and desire to treat disease naturally with minimal side effects. So, functional foods are getting popularity due to a wide range of essential constituents, which are associated to decrease the risk of chronic diseases. These bioactive compounds from seeds are involved in anti-adipogenic, antioxidant, antitumor, cardiovascular, hepato-protective, anti-inflammatory, anti-fertility, anti-microbial, anti-viral, hypoglycemic, etc. Moreover, the relationship between functional compounds along with their mechanism of action in the body, their extraction from the seeds for further research would be of great interest.