Determination of mycotoxins in plant-based beverages using QuEChERS and liquid chromatography–tandem mass spectrometry

Bioluminescence readout lateral flow immunoassay using nanobody targeting aflatoxin B1

Multiple signal detection methods are known for lateral flow immunoassays (LFIAs), with colorimetric approaches dominating the field. However, their limited sensitivity is a remaining challenge. Fluorescence-based signaling is regarded as a more sensitive method, but it comes at the cost of partial sacrifice of the user-friendliness of LFIAs due to the requirement of an excitation light source. In this context, bioluminescence providing an inherently high signal to noise ratio without the need of excitation light could be an attractive alternative. But only a few studies have demonstrated the application of bioluminescence signaling in LFIAs. This work aimed at the development of a simple bioluminescence-based LFIA for the detection of aflatoxin B1 (AFB1), used as a model target in a competitive LFIA format. Signal transduction was achieved by nanobody-nanoluciferase (Nluc) fusion proteins. These small-sized recombinant heavy-chain-only antibodies derived from the camelidae family directly linked with the Nluc enzyme produce high intensity glow-type bioluminescence in combination with the furimazine substrate. LFIA devices consisting of a sample pad, nitrocellulose membrane and absorbent pad with AFB1-BSA conjugate deposited at the test line on the nitrocellulose membrane, achieved an LOD of 0.26 ng mL-1 for aqueous AFB1 solutions pre-mixed with Nanobody-Nluc and bioluminescence emission observed on an imaging system. More user-friendly LFIA devices with integrated conjugate pad and pre-deposited Nanobody-Nluc provided clear AFB1 concentration-dependent bioluminescence signals with low background and enabled readout with a standard digital camera, resulting in an LOD of 1.12 ng mL-1. Finally, the LFIA strips have been applied in AFB1-spiked oat milk samples. The LOD of 4.09 ng mL-1 achieved in the real sample matrix is well below the maximum allowable residual concentration of AFB1 in the U.S. (20 ng mL-1).

Determination of twelve mycotoxins in red and green Sichuan peppers using QuEChERS method with LC-MS/MS

The detection of mycotoxins in Sichuan peppers is crucial for ensuring food safety. Hence, an efficient detection approach based on the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) method followed by LC-MS/MS (liquid chromatography-tandem mass spectrometry) was established for the analysis of various mycotoxins in dried red and green Sichuan peppers. Samples were extracted with a solution containing 99 % acetonitrile and 1 % formic acid. A new adsorbent, namely, ENVI-Carb, and primary secondary amines were used as purifying agents. The proposed method demonstrated good linearity (R2 ≥ 0.999), satisfactory recovery (77.3 %-109.2 %), and good repeatability (intraday and interday relative standard deviations ≤9.7 %) in dried red and green Sichuan peppers. Its limits of detection in red and green Sichuan peppers were 0.2-0.6 and 0.1-0.7 μg/kg, respectively. The established method can effectively eliminate complex matrix interference and provides an effective approach for the high-throughput detection of mycotoxins in various complex food matrices.

Risk ranking of mycotoxins in plant-based meat and dairy alternatives under protein transition scenarios

While reducing the consumption of animal-source foods is recommended for planetary and human health, potential emerging food safety risks associated with the transition to dietary patterns featuring plant-based meat (PBMA) and dairy alternatives (PBDA) remain unexplored. We assessed the exposure to mycotoxins and ranked the associated health risks related to the consumption of PBMA and PBDA. We simulated diets by replacing animal-source proteins with their plant-based alternatives. A risk ratio method, based on the hazard quotient (HQ), was applied to rank mycotoxin-related food safety risks. An aggregated dataset containing contamination data of 45 mycotoxins distributed over 182 PBDA and 131 PBMA samples, collected and analyzed in Europe, representing a convenience sample, was used as input in our risk assessment. The highest risk mycotoxins identified for PBMA in the lower bound scenario (LB) were the sum of aflatoxins (sum AF), alternariol monomethyl ether (AME), aflatoxin B1 (AFB1) and alternariol (AOH), with HQs for children of 121.3, 66.8, 24.0 and 4.3, respectively. In the milk substitution model (LB), HQs of 4.9 (sum AF) and 1.4 (AFB1) were calculated for children, indicating a potential food safety risk. Further analysis demonstrated that soy-based meat alternatives are the highest risk food products, in particular for sum AF, AME, AOH and AFB1. With regard to PBDA, highest HQs were found for sum AF in almond and oat drink, and AFB1 in oat drink. This research presents an approach to overcome the lack of data in the assessment of emerging risks associated with the shift to more sustainable dietary patterns.

Analysis and evaluation of in vitro bioaccessibility of aflatoxins B1, B2, G1 and G2 in plant-based milks

Plant-based milks emerge as a healthy and vegan alternative for human diet, but these foodstuffs are susceptible to be contaminated by aflatoxins. A new method based on SPE and HPLC-MS/MS analysis was optimized and validated to test the presence of aflatoxins B1, B2, G1 and G2 analysis in almond, oat, rice and soy commercial milks. Moreover, aflatoxin bioaccessibility was evaluated through an in vitro digestion assay applied to each type of spiked milk. Aflatoxins B1, B2 and G1 were detected in one soy milk sample below the LOQ, fulfilling the limits stablished by the European Legislation. The final bioaccessibility percentages were highly dependent on the type of mycotoxin and sample matrix, the highest and the lowest values were obtained for AFB2 (82%-92%) and AFG1 (15%-30%), whereas AFB1 (28%-50%) and AFG2 (32%-76%) values resulted more influenced by the plant-based milk matrix.

Dual-template magnetic molecularly imprinted polymers for selective extraction and sensitive detection of aflatoxin B1 and benzo(α)pyrene in environmental water and edible oil

The coexistence of multiple contaminates in the environment and food is of growing concern due to their extremely hazard as a well-known class I carcinogen, like aflatoxin B1 (AFB1) and benzo(α)pyrene (BaP). AFB1 and BaP are susceptible to coexistence in environmental water and edible oil, posing a significant potential risk to environmental monitoring and food safety. The remaining challenges in detecting multiple contaminates include unsatisfied sensitivity, insufficient targets selectivity, and interferences in complex matrices. Here, we developed dual-template magnetic molecularly imprinted polymers (DMMIPs) for selective extraction of dual targets in complex matrices from the environment and food. The DMMIPs were fabricated by surface imprinting with vinyl-functionalized Fe3O4 as carrier, 5,7-dimethoxycoumarin and pyrene as dummy templates, and methacrylamide as functional monomer. The DMMIPs showed excellent adsorption ability (12.73-15.80 mg/g), imprinting factors (2.01-2.58), and reusability of three adsorption-desorption cycles for AFB1 and BaP. The adsorption mechanism including hydrogen bond, electrostatic interaction and van der Waals force was confirmed by physical characterization and DFT calculation. Applying DMMIPs in magnetic solid phase extraction (MSPE) followed by high-performance liquid chromatography (HPLC) analysis enabled detection limits of 0.134 μg/L for AFB1 and 0.107 μg/L for BaP. Recovery rates for water and edible oil samples were recorded as 86.2%-110.3% with RSDs of 4.1%-11.9%. This approach demonstrates potential for simultaneous identification and extraction of multiple contaminants in environmental and food.

Mycotoxins in plant-based beverages: An updated occurrence

Plant-based diets are founded on consuming of foods of plant origin, aiming to replace or restrict the consumption of foods of animal origin. These diets have become popular in recent years, gaining new adherents daily. However, consumption of plant-based foods, like plant-based beverages, is a route of exposure to contaminants, such as mycotoxins. Mycotoxins are known for their toxic potential, causing damage to human health. Therefore, this study aimed to present a review providing new data to the population on exposure to mycotoxins by consumption of plant-based beverages. Based on the data collected, the occurrence of 21 mycotoxins was reported in plant-based beverages from different food matrices. Concerning probable daily intake, the highest values refer to deoxynivalenol, tentoxin, and fumonisin B1. In terms of exposure to mycotoxins, plant-based beverages can be present greater exposure to consumers than milk. Despite this, plant-based beverages alone do not pose a risk to consumer health.

Morphed aflaxotin concentration produced by Aspergillus flavus strain VKMN22 on maize grains inoculated on agar culture

This study identified and monitored the levels of aflatoxins (B1 and B2) produced by Aspergillus flavus isolate VKMN22 (OP355447) in maize samples sourced from a local shop in Johannesburg, South Africa. Maize samples underwent controlled incubation after initial rinsing, and isolates were identified through morphological and molecular methods. In another experiment, autoclaved maize grains were intentionally re-inoculated with the identified fungal isolate using spore suspension (106 spore/mL), after which 1 g of the contaminated maize sample was inoculated on PDA media and cultured for seven days. The aflatoxin concentrations in the A. flavus contaminated maize inoculated on culture media was monitored over seven weeks and then measured using liquid chromatography-mass spectroscopy (LC-MS). Results confirmed the successful isolation of A. flavus strain VKMN22 with accession number OP355447, which consistently produced higher levels of AFB1 compared to AFB2. AF concentrations increased from week one to five, then declined in week six and seven. AFB1 levels ranged from 594.3 to 9295.33 µg/kg (week 1-5) and then reduced from 5719.67 to 2005 µg/kg in week six and seven), while AFB2 levels ranged from 4.92 to 901.67 µg/kg (weeks 1-5) and then degraded to 184 µg/kg in week six then 55.33 µg/kg (weeks 6-7). Levene's tests confirmed significantly higher mean concentrations of AFB1 compared to AFB2 (p ≤ 0.005). The study emphasizes the importance of consistent biomonitoring for a dynamic understanding of AF contamination, informing accurate prevention and control strategies in agricultural commodities thereby safeguarding food safety.

The chemical and microbiological safety of emerging alternative protein sources and derived analogues: A review

Climate change and changing consumer demand are the main factors driving the protein transition. This shift toward more sustainable protein sources as alternatives to animal proteins is also reflected in the rapid upscaling of meat and dairy food analogues. Such changes could challenge food safety, as new food sources could result in new and unexpected food safety risks for consumers. This review analyzed the current knowledge on chemical and microbiological contamination of emerging alternative protein sources of plant origin, including soil-based (faba bean, mung bean, lentils, black gram, cowpea, quinoa, hemp, and leaf proteins) and aquatic-based (microalgae and duckweeds) proteins. Moreover, findings on commercial analogues from known alternative protein sources were included. Overall, the main focus of the investigations is on the European context. The review aimed to enable foresight approaches to food safety concerning the protein transition. The results indicated the occurrence of multiple chemical and microbiological hazards either in the raw materials that are the protein sources and eventually in the analogues. Moreover, current European legislation on maximum limits does not address most of the "contaminant-food" pairs identified, and no legislative framework has been developed for analogues. Results of this study provide stakeholders with a more comprehensive understanding of the chemical and microbiological safety of alternative protein sources and derived analogues to enable a holistic and safe approach to the protein transition.

Assessing the performance of various sorbents in micro-solid phase extraction cartridges for pesticide residue analysis in feed

Newly designed micro-solid phase extraction cartridges are now available, reflecting the increasing shift towards laboratory automation, especially in the clean-up step for the analysis of pesticide residues in food and feed. In the present study, the introduction of different sorbents on the newly designed PAL µSPE CTC cartridges was investigated for the removal of matrix interferents and the recovery of pesticides. Eight cartridges containing different sorbent combinations and different amounts were used including EMR-lipid (not activated), Z-sep, chitin, C18, PSA, and GCB. The evaluation of co-extractive removal for each cartridge showed that the optimal choice for removing fatty acids was the cartridges containing PSA and Z-sep as clean-up sorbents. However, the presence of C18 and EMR-lipid was still required for the removal of sterols and tocopherols. Two grams of sample, fish feed (FF) and rapeseed cake (RSC) were extracted using QuEChERS citrate buffer, followed by a freeze-out step. The recoveries and repeatability of QuEChERS using µ-SPE clean-up were evaluated for 216 pesticide residues (112 compounds analyzed by GC-MS/MS and 143 compounds by LC-MS/MS, from which 39 compounds were analyzed using both techniques). The best results, with recovery between 70 and 120% and RSD <20%, were achieved when FF samples were cleaned-up with 15 mg EMR-lipid and 20 mg MgSO4. This was achieved for 94% of GC-amenable compounds and 86% of LC-amenable compounds. In the case of RSC, the best results were seen when samples were cleaned-up with the cartridge containing only 20 mg Z-sep and 20 mg MgSO4. This was achieved for 88% of GC-amenable compounds and 90% of LC-amenable compounds. Although these cartridges yielded optimal results in terms of recovery, their use could require more instrument maintenance, especially for GC-MS/MS, due to the lower removal of co-extractives.

A Highly Sensitive and Group-Specific Enzyme-Linked Immunosorbent Assay (ELISA) for the Detection of AFB1 in Agriculture and Aquiculture Products

Aflatoxins (AFs) including AFB1, AFB2, AFG1 and AFG2 are widely found in agriculture products, and AFB1 is considered one of the most toxic and harmful mycotoxins. Herein, a highly sensitive (at the pg mL-1 level) and group-specific enzyme-linked immunosorbent assay (ELISA) for the detection of AFB1 in agricultural and aquiculture products was developed. The AFB1 derivative containing a carboxylic group was synthesized and covalently linked to bovine serum albumin (BSA). The AFB1-BSA conjugate was used as an immunogen to immunize mice. A high-quality monoclonal antibody (mAb) against AFB1 was produced by hybridoma technology, and the mAb-based ELISA for AFB1 was established. IC50 and limit of detection (LOD) of the ELISA for AFB1 were 90 pg mL-1 and 18 pg mL-1, respectively. The cross-reactivities (CRs) of the assay with AFB2, AFG1, and AFG2 were 23.6%, 42.5%, and 1.9%, respectively, revealing some degree of group specificity. Corn flour, wheat flour, and crab roe samples spiked with different contents of AFB1 were subjected to ELISA procedures. The recoveries and relative standard deviation (RSD) of the ELISA for AFB1 in spiked samples were 78.3-116.6% and 1.49-13.21% (n = 3), respectively. Wheat flour samples spiked with the mixed AF (AFB1, AFB2, AFG1, AFG2) standard solution were measured by ELISA and LC-MS/MS simultaneously. It was demonstrated that the proposed ELISA can be used as a screening method for evaluation of AFs (AFB1, AFB2, AFG1, AFG2) in wheat flour samples.

Application of a multi-toxin detect method to analyze mycotoxins occurrence in plant-based beverages

In recent years, plant-based beverages have gained popularity on the market due to environmental and ethical concerns, as well as milk intolerances and allergies. However, raw materials employed in the manufacture of these products are susceptible to mycotoxin contamination. For this reason, a new method based on a QuEChERS extraction procedure followed by ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) detection was developed for the analysis of 29 mycotoxins in oat, rice, soy, and almond beverages. The method was validated in terms of linearity, detection and quantification limits, matrix effect, recoveries, accuracy and precision. Satisfactory performance characteristics were achieved, with recoveries above 70% for most mycotoxins. Several commercial samples were analyzed, aflatoxins were frequently detected in rice and almond beverages, while T-2 and HT-2 toxins were identified in oat-based products. In addition, emerging mycotoxins such as enniatins and beauvericin were detected in the four types of beverages.

An Occurrence Study of Mycotoxins in Plant-Based Beverages Using Liquid Chromatography-Mass Spectrometry

Mycotoxins are toxic mold metabolites that can adversely affect human and animal health. More than 400 mycotoxins have been identified so far. Cereals and nuts are the predominant mycotoxin-contaminated foodstuffs. Plant-based drinks produced from cereals, nuts, and legumes have grown in popularity. The mycotoxins accumulated in these crops may transfer to these beverages. A liquid chromatography-tandem mass spectrometry method was developed and optimized for the assessment of 22 mycotoxins in commercially available plant-based drinks in Latvia and Lithuania. A total of 64% of the seventy-two analyzed beverages were positive for one to sixteen mycotoxins, with deoxynivalenol, beauvericin, and enniatins A, B, B1, T-2, and HT-2 toxins detected most frequently. The European Commission has not yet set guidelines for the maximum mycotoxin concentrations in plant-based beverages, nor has the European Food Safety Authority conducted a risk assessment. Therefore, acute exposure studies were provided for the Latvian population based on the assumed replacement of dairy milk with plant-based beverages to ascertain the safety of plant-based milk substitutes. Based on the observed levels of mycotoxin prevalence and contamination levels and assumed exposure, it can be concluded that tested plant-based beverages may be relatively safe. However, exposure to emerging mycotoxins should be considered.

Simultaneous Determination of Pesticide Residues and Mycotoxins in Storage Pu-erh Tea Using Ultra-High-Performance Liquid Chromatography Coupled with Tandem Mass Spectrometry

Mycotoxins and pesticides are the most concerning chemical contaminants that can affect the quality of Pu-erh tea during its production and storage. This study presents a method that can simultaneously determine 31 pesticide residues and six mycotoxins in Pu-erh tea within 11 min using ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UPLC-MS/MS) after QuEChERS extraction. The lower limit of quantification (LOQ) for all analytes ranged between 0.06 and 50 ppb. Recoveries for each pesticide and mycotoxin ranged between 62.0 and 130.3%, with intra- and inter-day precisions lower than 15%. Good linear relationships were obtained, with correlation coefficients of r2 > 0.991 for all analytes. The established method was applied to 31 Pu-erh tea samples, including raw and ripened Pu-erh tea with different storage times. As a result, pesticide residues were not detected in any of the collected samples, and the mycotoxins detected in the samples were well below the official maximum residue limits (MRLs). Notably, the levels of aflatoxin B1 (AFB1), aflatoxin G1 (AFG1) and aflatoxin G2 (AFG2) were lower than 1 ppb in the samples stored for more than 30 years.

T-2 and HT-2 Toxins: Toxicity, Occurrence and Analysis: A Review

One of the major classes of mycotoxins posing serious hazards to humans and animals and potentially causing severe economic impact to the cereal industry are the trichothecenes, produced by many fungal genera. As such, indicative limits for the sum of T-2 and HT-2 were introduced in the European Union in 2013 and discussions are ongoing as to the establishment of maximum levels. This review provides a concise assessment of the existing understanding concerning the toxicological effects of T-2 and HT-2 in humans and animals, their biosynthetic pathways, occurrence, impact of climate change on their production and an evaluation of the analytical methods applied to their detection. This study highlights that the ecology of F. sporotrichioides and F. langsethiae as well as the influence of interacting environmental factors on their growth and activation of biosynthetic genes are still not fully understood. Predictive models of Fusarium growth and subsequent mycotoxin production would be beneficial in predicting the risk of contamination and thus aid early mitigation. With the likelihood of regulatory maximum limits being introduced, increased surveillance using rapid, on-site tests in addition to confirmatory methods will be required. allowing the industry to be proactive rather than reactive.

A self-assembled DNA double-crossover-based fluorescent aptasensor for highly sensitivity and selectivity in the simultaneous detection of aflatoxin M1 and aflatoxin B1

Realizing the simultaneous speedy detection of multiple mycotoxins in contaminated food and feed is of great practical importance in the domain of food manufacturing and security. Herein, a fluorescent aptamer sensor based on self-assembled DNA double-crossover was developed and used for effective simultaneous quantitative detection of aflatoxins M₁ and B₁ by fluorescence resonance energy transfer (FRET). Fluorescent dye-modified aflatoxin M₁ and B₁ aptamers are selected as recognition elements and signal probes, and DNA double crosses are consistently locked by the aflatoxin aptamers, which results in a "turn-off" of the fluorescent signal. In the presence of AFM₁ and AFB₁, the aptamer sequences are more inclined to form Apt-AFM₁ and Apt-AFB₁ complexes, and the fluorescent probes are released from the DNA double-crossing platform, leading to an enhanced fluorescent signal (Cy3: 568 nm; Cy5: 660 nm). Under the optimal conditions, the signal response of the constructed fluorescent aptamer sensor showed good linearity with the logarithm of AFM₁ and AFB₁ concentrations, with detection limits of 6.24 pg/mL and 9.0 pg/mL, and a wide linear range of 0.01-200 ng/mL and 0.01-150 ng/mL, respectively. In addition, the effect of potential interfering substances in real samples was analyzed, and the aptasensor presented a good interference immunity. Moreover, by modifying and designing aptamer probes, the sensor can be applied to high-throughput simultaneous screening of other analytes, providing a new approach for the development of fluorescent aptamer sensors.

Recent Insights into Sample Pretreatment Methods for Mycotoxins in Different Food Matrices: A Critical Review on Novel Materials

Mycotoxins pollution is a global concern, and can pose a serious threat to human health. People and livestock eating contaminated food will encounter acute and chronic poisoning symptoms, such as carcinogenicity, acute hepatitis, and a weakened immune system. In order to prevent or reduce the exposure of human beings and livestock to mycotoxins, it is necessary to screen mycotoxins in different foods efficiently, sensitively, and selectively. Proper sample preparation is very important for the separation, purification, and enrichment of mycotoxins from complex matrices. This review provides a comprehensive summary of mycotoxins pretreatment methods since 2017, including traditionally used methods, solid-phase extraction (SPE)-based methods, liquid-liquid extraction (LLE)-based methods, matrix solid phase dispersion (MSPD), QuEChERS, and so on. The novel materials and cutting-edge technologies are systematically and comprehensively summarized. Moreover, we discuss and compare the pros and cons of different pretreatment methods and suggest a prospect.

Type B Trichothecenes in Cereal Grains and Their Products: Recent Advances on Occurrence, Toxicology, Analysis and Post-Harvest Decontamination Strategies

Type B trichothecenes (deoxynivalenol, nivalenol, 3-acetyldeoxynivalenol, 15-acetyldeoxynivalenol) and deoxynivalenol-3-glucoside (DON-3G) are secondary toxic metabolites produced mainly by mycotoxigenic Fusarium fungi and have been recognized as natural contaminants in cereals and cereal-based foods. The latest studies have proven the various negative effects of type B trichothecenes on human health. Due to the widespread occurrence of Fusarium species, contamination by these mycotoxins has become an important aspect for public health and agro-food systems worldwide. Hence, their monitoring and surveillance in various foods have received a significant deal of attention in recent years. In this review, an up-to-date overview of the occurrence profile of major type B trichothecenes and DON-3G in cereal grains and their toxicological implications are outlined. Furthermore, current trends in analytical methodologies for their determination are overviewed. This review also covers the factors affecting the production of these mycotoxins, as well as the management strategies currently employed to mitigate their contamination in foods. Information presented in this review provides good insight into the progress that has been achieved in the last years for monitoring type B trichothecenes and DON-3G, and also would help the researchers in their further investigations on metabolic pathway analysis and toxicological studies of these Fusarium mycotoxins.

One sample multi-point calibration curve as a novel approach for quantitative LC-MS analysis: the quantitation of six aflatoxins in milk and oat-based milk as an example

Preparing of calibration curves are critical steps for accurate quantitative LC-MS bioanalysis. Traditional multi-sample external calibration curve (MSCC) is labor-intensive and prone to error. In this study, a novel strategy of one sample multi-point calibration curve (OSCC) using multiple isotopologue reaction monitoring (MIRM) was proposed and validated using LC-MS for the quantitation of six aflatoxins in milk and oat-based milk samples. The developed MIRM-OSCC methodology is comprehensively validated and the results indicated that the established method exhibits good performance in selectivity, sensitivity, accuracy and precision. Furthermore, the OSCC could realize sample dilution by monitoring the MIRM channel with less intensity for samples beyond the upper limit of quantification, without the need of sample dilution, which improves the assay throughput. Considering the advantages of excluding the MSCC preparation and sample dilution in OSCC, this strategy can be widely applied in various fields such as drugs, food safety and environmental analysis.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

Enzyme immunoassays for the detection of mycotoxins in plant-based milk alternatives: pitfalls and limitations

Plant-based milk alternatives (PBMAs) are a potential source of mycotoxin uptake. To ensure food safety, simple and rapid testing methods of PBMAs for mycotoxins are therefore required. This study investigated the applicability of enzyme immunoassay (EIA) methods for direct testing of PBMAs without sample extraction. Mycotoxin analyses included aflatoxin B₁ (AFB₁), sterigmatocystin (STC), ochratoxin A (OTA), deoxynivalenol (DON), and T-2/HT-2-toxin (T-2/HT-2). It was found that the PBMA matrix negatively affected the EIA to varying degrees, thus affecting the reliability of the results. A dilution of PBMAs of at least 1:8 was necessary to overcome matrix interference. This resulted in calculated detection limits of 0.4 µg/L (AFB₁), 2 µg/L (STC), 0.08 µg/L (OTA), 16 µg/L (DON), and 0.4 µg/L (T-2/HT-2). After analysis of 54 PBMA products from German retail stores, positive results in at least one test system were obtained for 23 samples. However, most positive results were near the calculated detection limit. Control analyses of selected samples by LC–MS/MS for AFB₁, STC, and OTA qualitatively confirmed the presence of trace amounts of STC in some samples, but quantitative agreement was poor. It was concluded that the high diversity of ingredients used in PBMAs led to a highly variable degree of sample matrix interference even in a 1:8 dilution. Since the use of higher dilutions conflicts with the need to achieve low detection limits, the application of EIA for routine mycotoxin analysis in PBMA for mycotoxins requires further study on the development of a feasible sample preparation method.

Multimycotoxin Analysis in Oat, Rice, Almond and Soy Beverages by Liquid Chromatography-Tandem Mass Spectrometry

This study developed and validated an analytical methodology for the determination of aflatoxins, enniatins, beauvericin, zearalenone, ochratoxin-A, alternariols, HT-2 and T-2 toxin in soy, oat, rice and almond beverages, based on solid phase extraction columns (SPE) and analyzed by liquid chromatography coupled to mass spectrometry in tandem. C18 SPE was successfully applied, obtaining recoveries that range from 72 ± 12% (ochratoxin-A) to 99 ± 4% (ENA1) at high level (L1) and 65 ± 8% (T-2) to 128 ± 9% (alternariol monomethyl ether) at low levels (L3). The methodology was validated according to Commission Decision 2002/657/EC, with limits of quantification ranging from 0.3 (AFs in oat beverages) to 18 ng/mL (HT-2 in rice beverage). The analysis of 56 beverage samples purchased from Valencia (Spain) showed at least one mycotoxin occurring in 95% of samples, including carcinogenic aflatoxins, and oat beverage was the most contaminated. This is a newest validated methodology for the quantification of sixty mycotoxins in oat, rice, almond and soy beverages.

Simultaneous Determination of Ergot Alkaloids in Swine and Dairy Feeds Using Ultra High-Performance Liquid Chromatography-Tandem Mass Spectrometry

Ergot alkaloids (EAs) are mycotoxins mainly produced by the fungus Claviceps purpurea. EAs are known to affect the nervous system and to be vasoconstrictors in humans and animals. This work presents recent advances in swine and dairy feeds regarding 11 major EAs, namely ergometrine, ergosine, ergotamine, ergocornine, ergocryptine, ergocristine, ergosinine, ergotaminine, ergocorninine, ergocryptinine, and ergocristinine. A reliable, sensitive, and accurate multiple mycotoxin method, based on extraction with a Mycosep 150 multifunctional column prior to analysis using UHPLC-MS/MS, was validated using samples of swine feed (100) and dairy feed (100) for the 11 targeted EAs. Based on the obtained validation results, this method showed good performance recovery and inter-day and intra-day precision that are in accordance with standard criteria to ensure reliable occurrence data on EA contaminants. More than 49% of the swine feed samples were contaminated with EAs, especially ergocryptine(-ine) (40%) and ergosine (-ine) and ergotamine (-ine) (37%). However, many of the 11 EAs were not detectable in any swine feed samples. In addition, there were contaminated (positive) dairy feed samples, especially for ergocryptine (-ine) (50%), ergosine (-ine) (48%), ergotamine (-ine), and ergocristine (-ine) (49%). The mycotoxin levels in the feed samples in this study almost complied with the European Union regulations.

Validation of an analytical method based on QuEChERS and LC-MS/MS to quantify nine mycotoxins in plant-based milk

Plant-based beverages (popularly known as vegetable milk) have become increasingly important in recent years. However, the nonexistence of information on mycotoxin contamination is noticeable. We herein describe the development and validation of an analytical methodology that employs QuEChERS and LC-MS/MS for the simultaneous determination of nine mycotoxins (aflatoxins B1, B2, G1, and G2, fumonisins B1 and B2, ochratoxin A, zearalenone, and citreoviridin) in seven types of vegetable milk (peanut, oat, rice, cashew, maize, soybean, and coconut). The method provided the following quantification limits, recoveries at the lowest validated concentration and relative standard deviations under repeatability conditions at the lowest validated concentration, respectively: aflatoxin B1 (0.023 μg/l, 84.98 and 9.23%); aflatoxin B2 (0.024 μg/, 93.00 and 4.85%); aflatoxin G1 (0.057 μg/l, 98.85 and 5.53%); aflatoxin G2 (0.031 μg/l, 96.64 and 4.08%); fumonisin B1 (2.166 μg/l, 75.55 and 16.78%); fumonisin B2 (1.105 μg/l, 70.47 and 11.89%); ochratoxin A (0.104 μg/l, 72.05 and 5.12%); zearalenone (8.093 μg/l, 107.10 and 6.37%); citreoviridin (1.305 μg/l, 97.25 and 7.28%). The method uses small amounts of samples, solvents, and other inexpensive reagents with no need for laborious clean-up and pre-concentration steps. Its attractive characteristics (simplicity, low cost compared to procedures that use immunoaffinity columns, and full compatibility with routine analyses) make it potentially valuable. As a proof-of-principle, the validated methodology was applied to seven commercial samples of different compositions showing that some were contaminated with aflatoxins and ochratoxin A.

Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry

A selective molecularly imprinted polymer (MIP) adsorbent was synthesised and used in a batch micro-solid phase extraction format for isolating aflatoxins (AFB1, and AFB2) from non-dairy beverages before liquid chromatography-tandem mass spectrometry determination. MIP synthesis (precipitation polymerization in 3 : 1 acetonitrile/toluene as a porogen) was performed with 5,7-dimethoxycoumarin (DMC), methacrylic acid (MAA) and divinylbenzene-80 (DVB) as a dummy template, functional monomer and cross-linker, respectively (1 : 4 : 20 molar ratio). 2,2'-Azobisisobutyronitrile (AIBN) was used as a polymerization initiator. The adsorbent MIP (50 mg) was enclosed in a cone-shaped polypropylene membrane (porous membrane protected molecularly imprinted micro-solid phase extraction), and parameters such as sample pH, mechanical (orbital-horizontal) shaking, the extraction time (loading stage), the composition of the eluting solution, and the desorption time were optimised. The highest extraction yields were obtained by using 5 mL of non-dairy beverages (pH adjusted at 6.0), and mechanical shaking (150 rpm) for 15 min. Elution was performed with 5 mL of an acetonitrile/formic acid (97.5 : 2.5) mixture under ultrasound (325 W, 35 kHz) for 15 min. After eluate evaporation to dryness and re-dissolution in 150 μL of the mobile phase, the pre-concentration factor of the method was 33.3, which yields limits of detection within the 0.085-0.207 μg L^-1 range. In addition, the current proposal was shown to be an accurate and precise method through relative standard deviation of intraday and inter-day assays below 18% and analytical recoveries in the range of 91-104%. However, the method was found to suffer from matrix effects.

A simple extraction method with no lipid removal for the determination of aflatoxins in almonds by liquid chromatography tandem-mass spectrometry (LC-MS/MS)

The present study describes a simple and rapid method for the determination of aflatoxins in almonds using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Aflatoxins were extracted using a modified QuEChERS method with little sample preparation, excluding the use of laborious purification procedures. Extracts were frozen overnight to separate the majority of lipids. The method was successfully validated for almonds. Linearity was demonstrated in the range 0.125-20 µg/kg. Limits of quantification (LOQ) ranged from 0.34 to 0.5 μg/kg. Matrix effect was not significant for the aflatoxins. Satisfactory recoveries were obtained at spike levels below 1 μg/kg and between 1 and 10 μg/kg. Relative standard deviations (RSDs) of repeatability and reproducibility were below 15%. The method was successfully tested with two proficiency tests in almond powder and peanut paste, with acceptable z-scores (-2 ≤ z ≤ 2). Only one of 11 local almond samples contained detectable aflatoxins, at concentrations below the maximum permitted level.

Chemometric Approach Based on Accuracy Profile and Data Chronological Distribution as a Tool to Detect Performance Degradation and Improve the Analytical Quality Control for Aflatoxins' Analysis in Almonds Using UPLC-MS/MS

One of the main objectives of routine laboratories is the development of simple and reliable methods as well as meeting fit-for-purpose criteria for regulatory surveillance. In this study, the accuracy profiles and the evaluation of the distribution of results in the case of aflatoxins in almonds have been performed using ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The method consists of designing the experiment and using certified reference material (CRM) to evaluate the bias, to calculate the combined uncertainty, and to construct the control charts. Good sensitivity (limit of quantifications (LOQs) 0.34-0.5 μg/kg) and recovery (between 82 and 107%) were achieved. The proposed method was successfully tested with a proficiency test in almond powder with acceptable z scores (-2 ≤ z ≤ 2). The results provided direct evidence for the proper functioning and stability of the whole analytical protocol, allowing acceptable combined uncertainty.

Critical Assessment of Mycotoxins in Beverages and Their Control Measures

Mycotoxins are secondary metabolites of filamentous fungi that contaminate food products such as fruits, vegetables, cereals, beverages, and other agricultural commodities. Their occurrence in the food chain, especially in beverages, can pose a serious risk to human health, due to their toxicity, even at low concentrations. Mycotoxins, such as aflatoxins (AFs), ochratoxin A (OTA), patulin (PAT), fumonisins (FBs), trichothecenes (TCs), zearalenone (ZEN), and the alternaria toxins including alternariol, altenuene, and alternariol methyl ether have largely been identified in fruits and their derived products, such as beverages and drinks. The presence of mycotoxins in beverages is of high concern in some cases due to their levels being higher than the limits set by regulations. This review aims to summarize the toxicity of the major mycotoxins that occur in beverages, the methods available for their detection and quantification, and the strategies for their control. In addition, some novel techniques for controlling mycotoxins in the postharvest stage are highlighted.

Dispersive Liquid-Liquid Microextraction (DLLME) and LC-MS/MS Analysis for Multi-Mycotoxin in Rice Bran: Method Development, Optimization and Validation

Rice bran, a by-product of the rice milling process, has emerged as a functional food and being used in formulation of healthy food and drinks. However, rice bran is often contaminated with numerous mycotoxins. In this study, a method to simultaneous detection of aflatoxins (AFB1, AFB2, AFG1, and AFG2), ochratoxin A (OTA), deoxynivalenol (DON), fumonisins (FB1 and FB2), sterigmatocystin (STG), T-2 toxin, HT-2 toxin, diacetoxyscirpenol (DAS) and zearalenone (ZEA) in rice bran was developed, optimized and validated using dispersive liquid–liquid microextraction (DLLME) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). In DLLME, using a solvent mixture of methanol/water (80:20, v/v) as the dispersive solvent and chloroform as the extraction solvent with the addition of 5% salt improved the extraction recoveries (63–120%). The developed method was further optimized using the response surface methodology (RSM) combined with Box–Behnken Design (BBD). Under the optimized experimental conditions, good linearity was obtained with a correlation coefficient (r²) ≥ 0.990 and a limit of detection (LOD) between 0.5 to 50 ng g⁻¹. The recoveries ranged from 70.2% to 99.4% with an RSD below 1.28%. The proposed method was successfully applied to analyze multi-mycotoxin in 24 rice bran samples.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Quantitative analysis of colony number in mouldy wheat based on near infrared spectroscopy combined with colorimetric sensor

Current work presented a novel method based on colorimetric sensor (CS) combined with visible/near-infrared spectroscopy (VNIRs) for the detection of volatile markers in wheat infected by Aspergillus glaucus. Wheat samples with different mouldy degree was cultivated for backup under temperature of 25-28 °C in incubator. The total colony number was determined by flat colony counting method. Through employing chemo-responsive dyes including 8-(4-nitrophenyl)-4, 4-difluoro-BODIPY (NO₂BDP), 8-(4-bromophenyl)-4,4-difluoro-BODIPY(BrBDP) and 8-phenyl-4,4-difluoro- BODIPY(HBDP) as capture probes of colorimetric sensor for volatile organic compounds (VOCs). The spectral data of CS-VNIRs were scanned and used to build synergic interval partial least squares (Si-PLS) models. The optimized Si-PLS model based on HBDP sensor gave a better detection performance, and the correlation coefficient of the prediction set Rp = 0.9387. The achieved high correlation rates imply that the technique may be deployed as a panacea to identify and quantify the colony number of different mouldy wheat.

Mycotoxins in Functional Beverages: A Review

Consumer dietary habits have drastically changed in recent decades and functional beverages now have a strong position in the market. The majority of these beverages are produced using simple processes that use raw products, such as cereals, legumes, fruits, and nuts, among others, and these are known to be frequently contaminated with mycotoxins. This review is focused on the occurrence of these toxic compounds in plant-based milks, fruit juices, and herbal teas. The fate of the toxins during processing is discussed to establish the potential risk posed by the consumption of these kind of beverages regarding mycotoxin uptake.

Combined (d)SPE-QuEChERS Extraction of Mycotoxins in Mixed Feed Rations and Analysis by High Performance Liquid Chromatography-High-Resolution Mass Spectrometry

The objective of this work was the development of a methodology capable of simultaneously determine 26 mycotoxins in mixed feed rations collected in 20 dairy farms. A sample preparation methodology based on a combination of (d)SPE and QuEChERS extractions was used. Liquid chromatography-high resolution mass spectrometry was employed for both identification and quantification purposes. To this respect, a powerful workflow based on data-independent acquisition, consisting of fragmenting all precursor ions entering the mass spectrometer in narrow m/z isolation windows (SWATH), was implemented. SWATH data file then contains all the information that would be acquired in a multitude of different experimental approaches in a single all-encompassing dataset. Analytical method performance was evaluated in terms of linearity, repeatability and matrix effect. Relative recoveries were also measured, giving values above 80% for most compounds. Matrix-matched calibration was carried out and enabled reaching the low ng mL-1 level for many mycotoxins. The observed matrix effect, in most cases suppressive, reached even values higher than 60%. The repeatability was also adequate, showing a relative standard deviation lower than 10%. All unified samples analyzed showed co-occurrence of two or more mycotoxins, recurrently zearalenone, fumonisin B1, and β-zearalenol, with an occurrence frequency ranging from 60% to 90%.

An Automated and High-Throughput Immunoaffinity Magnetic Bead-Based Sample Clean-Up Platform for the Determination of Aflatoxins in Grains and Oils Using UPLC-FLD

Sample clean-up remains the most time-consuming and error-prone step in the whole analytical procedure for aflatoxins (AFTs) analysis. Herein, an automated and high-throughput sample clean-up platform was developed with a disposable, cost-effective immunoaffinity magnetic bead-based kit. Under optimized conditions, the automated method takes less than 30 min to simultaneously purify 20 samples without requiring any centrifugation or filtering steps. When coupled to ultra-high performance liquid chromatography with fluorescence detection, this new analysis method displays excellent accuracy and precision as well as outstanding efficiency. Furthermore, an interlaboratory study was performed in six laboratories to validate the novel protocol. Mean recovery, repeatability, reproducibility, and Horwitz ratio values were within 91.9%–107.4%, 2.5%–7.4%, 2.7%–10.6%, and 0.26%–0.90, respectively. Results demonstrate that the developed sample clean-up platform is a reliable alternative to most widely adopted clean-up procedures for AFTs in cereals and oils.

Plant-based milks: unexplored source of emerging mycotoxins. A proposal for the control of enniatins and beauvericin using UHPLC-MS/MS

Mycotoxins have become one of the most common contaminants reported worldwide. Current legislation has established maximum levels only for some well-known mycotoxins; however, there are many other "emerging mycotoxins" for which there is no regulation, as enniatins and beauvericin. An analytical method based on salting-out assisted liquid-liquid extraction followed by ultra-high performance liquid chromatography tandem mass spectrometry is proposed for determination of enniatin A, A1, B, B1, and beauvericin in different plant-based milks, as a possible source of these contaminants, is proposed. The method showed good precision and trueness (RSD <8% and recoveries between 84-97%) with a moderate matrix effect. From a total of 32 samples of plant-based milks of different compositions (including 8 rice milks, 8 oat milks and 16 soy milks), 3 samples were contaminated with the five mycotoxins, while 5 samples were contaminated with four of them, being oat milk the most susceptible for contamination.

Recent Development of Aptamer Sensors for the Quantification of Aflatoxin B1

Aflatoxin B1 (AFB1) is one of the most frequently-found mycotoxins in contaminated food. As the content of mycotoxins is particularly low in food, the development of probes to detect AFB1 in foods with high sensitivity and selectivity is an urgent social need for the evaluation of food quality. Numerous techniques have been developed to monitor AFB1. Nevertheless, most of them require cumbersome, labor-consuming, and sophisticated instruments, which have limited their application. An aptamer is a single, short nucleic acid sequence that is capable of recognizing different targets. Owing to their unique properties, aptamers have been considered as alternatives to antibodies. Aptasensors are considered to be an emerging strategy for the quantification of aflatoxin B1 with high selectivity and sensitivity. In this review, we summarize recent developments in colormetric, electrochemical, SERS, and fluorescent aptasensors for the quantification of AFB1. Finally, the perspectives and current challenges of aptasensors for AFB1 are outlined.

Optimization and validation of a liquid chromatography/tandem mass spectrometry (LC-MS/MS) method for the determination of aflatoxins in maize

A LC-MS/MS method has been optimized and validated for the determination of aflatoxins (AFB1, AFB2, AFG1 and AFG2) in maize. Extraction was performed using a modified QuEChERS method with little sample preparation without the need for purification procedure. Determination was performed by high pressure liquid chromatography (HPLC) coupled to tandem mass spectrometry (MS/MS). The acquisition was performed using MassHunter software in Multiple Reaction Monitoring (MRM) mode in positive polarity. Different mobile phases were tested to control the degree of the ionization and good performances were obtained for methanol/water with 5 mM ammonium acetate. MRM experiments were optimized for each aflatoxin in order to generate sensitive transitions. Linearity was demonstrated for the aflatoxins in the range 0.225-1.25 μg/L. Limits of detection (LOD) (0.11 and 0.36 μg/Kg) and limits of quantification (LOQ) (0.36-1.19 μg/Kg) of the aflatoxins are below the maximum permitted levels set by the European Union (EU). Aflatoxins have acceptable recoveries using QuEChERS method in the acceptable range of 50-120% for levels below 1 μg/Kg. Satisfactory recoveries were also obtained in the acceptable range of 70-110% for levels between 1 and 10 μg/Kg except for AFB2. Relative standard deviation (RSD) of recoveries for the intra-day precision and inter-day precision were below 11 %. Selectivity of the method was tested and no spectral interferences were observed in the appropriate retention times. The main advantage of the proposed method is its ease of use and requires a smaller solvent consumption that reduces the time and cost of the analysis.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.

Mycotoxin Contamination of Beverages Obtained from Tropical Crops

This review is mainly centered on beverages obtained from tropical crops, including tea, nut milk, coffee, cocoa, and those prepared from fruits. After considering the epidemiological data found on the matrices above, the focus was given to recent methodological approaches to assess the most relevant mycotoxins. Aspects such as singularities among the mycotoxin and the beverage in which their were found, and the economic effects and repercussions that the mycotoxin-tainted ingredients have on the beverage industry were pointed out. Finally, the burden of their consumption through beverages, including risk and health effects on humans, was addressed as well.

Determination of aflatoxin and zearalenone analogs in edible and medicinal herbs using a group-specific immunoaffinity column coupled to ultra-high-performance liquid chromatography with tandem mass spectrometry

Six aflatoxins (AFs; AF B₁, B₂, G₁, G₂, M₁ and M₂) and six zearalenone (ZEN) analogs (ZEN, zearalanone, α-zeralanol, β-zeralanol, α-zearalenol, and β-zearalenol) were simultaneously extracted from edible and medicinal herbs using a group-specific immunoaffinity column (IAC) and then identified by ultra-high-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). The IAC was prepared by coupling N-hydroxysuccinimide-activated Sepharose 4B Fast Flow gel with two group-specific monoclonal antibodies. The column capacities to six AFs and six ZEN analogs ranged from 100.2 ng to 167.1 ng and from 59.5 ng to 244.4 ng, respectively. The IAC-UPLC-MS/MS method was developed and validated with three different matrices (Chinese yam [Dioscorea polystachya], Platycodon grandiflorum and coix seed [Semen Coicis]). Recoveries of twelve analytes from edible and medicinal herbs were in the range of 64.7%-112.1%, with relative standard deviations below 13.7%. The limits of quantification were in the range from 0.08 μg kg^-1 to 0.2 μg kg^-1. The method was proven to be sensitive and accurate, and suitable for the determination of real samples.