Effective synthesis of magnetic porous molecularly imprinted polymers for efficient and selective extraction of cinnamic acid from apple juices

Synthesis of multi-template imprinted mesoporous silica nanoparticles via micelle-based interface imprinting strategy for specific and efficient extraction of five cinnamic acid derivatives from traditional Chinese medicines

Cinnamic acid derivatives, a crucial group of active components in traditional Chinese medicines (TCMs), encompass chlorogenic acid, caffeic acid, 4-hydroxycinnamic acid, ferulic acid, and cinnamic acid. These compounds exhibit a wide array of pharmacological activities, such as free radical scavenging, antioxidation, antibacterial effects, and antitumor activity. However, traditional separation and detection methods often suffer from poor selectivity, low extraction efficiencies, and insufficient sensitivity, thus limiting their applicability in studying the complex and diverse active component groups in TCMs. Herein, we proposed a novel micelle-based interface imprinting strategy by integrating multi-template imprinting with mesoporous silica. Specifically, caffeic acid, serving as an epitope template for chlorogenic acid, along with 4-hydroxycinnamic acid, ferulic acid, and cinnamic acid, collectively constituted a multi-template system. Micelles were generated using a cationic surfactant cetyltrimethylammonium bromide, which confined the four template molecules to the micelle surface through electrostatic attraction. Aminopropyltriethoxysilane, 3-ureidopropyltriethoxysilane, and benzyltriethoxysilane were selected as functional monomers, while tetraethyl orthosilicate were selected as both a cross-linker and a silicon source for the synthesis of multi-template imprinted mesoporous silica nanoparticles (MTIMSNs). The MTIMSNs demonstrated high specificity and impressive adsorption capacity for chlorogenic acid, caffeic acid, 4-hydroxycinnamic acid, ferulic acid, and cinnamic acid, with maximum cross-reactivities of 8.8 %, 7.6 %, 6.8 %, 9.5 %, and 11.5 %, respectively, and corresponding adsorption capacities of 3.712, 4.114, 4.843, 3.517, and 2.814 mg/g, respectively. The MTIMSNs-based affinity extraction coupled with high performance liquid chromatography have been successfully applied to the determination of the five cinnamic acid derivatives in Taraxaci Herba.

The biosynthesis of L-phenylalanine-derived compounds by engineered microbes

L-Phenylalanine (L-Phe) is an important aromatic amino acid, which has been widely used in food, health care products, medicine and other fields. Based on the relatively mature microbial biosynthesis process, a variety of L-phenylalanine-derived compounds have attracted more and more attentions owing to their extensively potential applications in the fields of food, medicine, spices, cosmetics, and pesticides. However, the challenge of biosynthesis of L-phenylalanine-derived compounds remains the issue of low production and productivity. With the development of metabolic engineering and synthetic biology, the biosynthesis of L-phenylalanine has reached a high level. Therefore, the synthesis of L-phenylalanine-derived compounds based on high production strains of L-phenylalanine has broad prospects. In addition, some L-phenylalanine-derived compounds are more suitable for efficient synthesis by exogenous addition of precursors due to their longer metabolic pathways and the inhibitory effects of many intermediate products. This review systematically summarized the research progress of L-phenylalanine-derived compounds, including phenylpyruvate derivatives, trans-cinnamic derivatives, p-coumaric acid derivatives and other L-phenylalanine-derived compounds (such as flavonoids). Finally, the main strategies to improve the production of L-phenylalanine-derived compounds were summarized, and the development trends of the synthesis of L-phenylalanine-derived compounds by microbial method were also prospected.

Computer-aided design of molecularly imprinted polymer reinforced by double hybrid monomers for selective purification of hydroxycamptothecin

A kind of hydroxycamptothecin (HCPT) hybrid molecularly imprinted polymer (AT/MA-HMIPs) with high selectivity and hard silicon skeleton was successfully prepared based on double hybrid monomers. The relationship between templates and functional monomers was studied through computer molecular simulation and experiments. Three single-monomer molecularly imprinted polymers were prepared as controls. The Langmuir isotherm and pseudo-second-order kinetic models were found to fit well with the adsorption results. The maximum adsorption capacity was 18.79 mg/g, and equilibrium was reached within 20 min. Moreover, it shows excellent selectivity (imprinting factor is 10.73) and good recoverability (after 10 adsorption-desorption cycles, the adsorption capacity only decreases by 7.75%) for HCPT. The purity of HCPT can reach 80.86% after being put into a solid phase extraction column and used in an actual sample, and the yield was 61.43%. This study lays the fundament for the development of excellent HCPT molecularly imprinted composites.

Magnetic dummy template molecularly imprinted particles functionalized with dendritic nanoclusters for selective enrichment and determination of 4-methylnitrosamino-1-(3-pyridyl)-1-butanone (NNK) in tobacco products

The compound 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), one of the tobacco specific nitrosamines (TSNAs), is widely recognized as a major carcinogen found in tobacco products, environmental tobacco smoke and wastewater. Thus, a selective enrichment and sensitive detection method for monitoring the risk of NNK exposure is highly desirable. In this study, a magnetic molecularly imprinted polymer (MMIP) functionalized with dendritic nanoclusters was synthesized to selectively recognize NNK via the dummy template imprinting strategy, aiming to avoid residual template leakage and increase the imprinting efficiency. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, as well as vibrating sample magnetometry (VSM) and nitrogen adsorption/desorption analysis. The resulting MMIPs exhibited high adsorption capacity, fast binding kinetics and good selectivity for trace amounts of NNK. A rapid, low cost and efficient method for detecting NNK in tobacco products was established using magnetic dispersive solid-phase extraction coupled with HPLC-DAD with a good linear range of 0.1-250 μg mL^-1. The limit of detection (LOD) and limit of quantification (LOQ) of NNK were 13.5 and 25.0 ng mL^-1, respectively. The average recoveries were 87.8-97.3% with RSDs lower than 3%. The results confirmed that the MMIPs could be used as an excellent selective adsorbent for NNK, with potential applications in the pretreatment of tobacco products.

Magnetic nanofluid based on hydrophobic deep eutectic solvent for efficient and rapid enrichment and subsequent determination of cinnamic acid in juice samples: Vortex-assisted liquid-phase microextraction

A quick, environmentally friendly and easy approach for the determination of cinnamic acid in juice samples based on the creation and usage of a novel magnetic nanofluid (mixture of hydrophobic deep eutectic solvent and magnetic nanoparticles) has been reported. Response surface methodology was applied to justify the contribution of the efficient factors including pH, nanofluid volume, ionic strength and vortex time. Cinnamic acid concentrations were monitored and quantified based on their HPLC peak representing linear correlations under the best operational circumstances showing linearity between 3 and 550 ng mL^-1. The LOD, LOQ, and enrichment factor for cinnamic acid were 0.8 ng mL^-1, 2.7 ng mL^-1 and 57.2, respectively. The proposed method was used for enrichment and subsequent determination of cinnamic acid from juice samples which suggests a potential alternative approach for cinnamic acid analysis in complicated food samples.

Preparation of multiresponsive hydrophilic molecularly imprinted microspheres for rapid separation of gardenia yellow and geniposide from gardenia fruit

In this work, a robust method for the separation of gardenia yellow and geniposide from gardenia fruit was developed based on a molecularly imprinted solid phase extraction (MISPE) procedure. First, hydrophilic molecularly imprinted microspheres (HMIMs) were prepared using gardenia yellow as the template via reversible addition fragmentation chain transfer (RAFT) precipitation polymerization. The resultant HMIMs demonstrated the multiresponsiveness to pH, temperature, and magnetism, achieving controllable uptake and release of gardenia yellow and easy recovery by external magnets. Meanwhile, the HMIMs possessed high adsorption capacity, fast binding kinetics, specific recognition, and reusability. Finally, a MISPE approach using HMIMs as adsorbent was developed for extraction of gardenia yellow and purification of geniposide after optimization of the adsorption and elution conditions. Thus, efficient separation of gardenia yellow and geniposide with relative purities of 99.77 ± 0.05% (94.04 ± 0.10% recovered) and 94.50 ± 0.62% (95.40 ± 0.86% recovered), respectively, was achieved.

A review of recent advances in non-enzymatic electrochemical creatinine biosensing

Creatinine biosensing is a rapidly developing field owing to the clinical relevance of creatinine as a vital biomarker for several diseases associated with renal, thyroidal, and muscular dysfunctions. Over the years, we have observed numerous creatinine biosensing strategies, including the most widely studied enzymatic creatinine biosensors. Though the enzymatic approach provides excellent selectivity and reliability, it has certain drawbacks, which include high fabrication cost and poor storage stability (that is inherent to every enzyme-based biosensors). This has led to the development of non-enzymatic creatinine biosensors, of which electrochemical sensors are the most promising for point-of-care applications. However, only a limited number of studies have been conducted and there is a lack of reviews addressing the recent advances in this research area. Herein, we present for the first time, a review with a prime focus on the various strategies implemented in non-enzymatic electrochemical creatinine biosensing. We aim to offer a comprehensive context on the achievements and limitations of currently available non-enzymatic electrochemical creatinine biosensors and address the underlying factors pertaining to the interplay of modification/fabrication techniques with the sensitivity, selectivity, interferences, and long-term storage stability of the biosensor. We hope that this work shall prove to be seminal in the conception and advancement of future non-enzymatic electrochemical creatinine biosensors.

Production of trans-cinnamic acid by whole-cell bioconversion from L-phenylalanine in engineered Corynebacterium glutamicum

Background

trans-cinnamic acid (t-CA) is a phenylpropanoid with a broad spectrum of biological activities including antioxidant and antibacterial activities, and it also has high potential in food and cosmetic applications. Although significant progress has been made in the production of t-CA using microorganisms, its relatively low product titers still need to be improved. In this study, we engineered Corynebacterium glutamicum as a whole-cell catalyst for the bioconversion of l-phenylalanine (l-Phe) into t-CA and developed a repeated bioconversion process.

Results

An expression module based on a phenylalanine ammonia lyase-encoding gene from Streptomyces maritimus (SmPAL), which mediates the conversion of l-Phe into t-CA, was constructed in C. glutamicum. Using the strong promoter P_H36 and ribosome binding site (RBS) (in front of gene 10 of the T7 phage), and a high-copy number plasmid, SmPAL could be expressed to levels as high as 39.1% of the total proteins in C. glutamicum. Next, to improve t-CA production at an industrial scale, reaction conditions including temperature and pH were optimized; t-CA production reached up to 6.7 mM/h in a bioreactor under optimal conditions (50 °C and pH 8.5, using NaOH as base solution). Finally, a recycling system was developed by coupling membrane filtration with the bioreactor, and the engineered C. glutamicum successfully produced 13.7 mM of t-CA (24.3 g) from 18.2 mM of l-Phe (36 g) and thus with a yield of 75% (0.75 mol/mol) through repetitive supplementation.

Conclusions

We developed a highly efficient bioconversion process using C. glutamicum as a biocatalyst and a micromembrane-based cell recycling system. To the best of our knowledge, this is the first report on t-CA production in C. glutamicum, and this robust platform will contribute to the development of an industrially relevant platform for the production of t-CA using microorganisms.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01631-1.

Development of magnetism-assisted in-tube solid phase microextraction of phenolic acids in fruit juices prior to high-performance liquid chromatography quantification

Magnetism-assisted in-tube solid phase microextraction based on porous monolith mingled with Fe₃ O₄ nanoparticles was developed for capture of phenolic acids in fruit juices. First, poly (1-allyl-3-methylimidazolium bis [(trifluoro methyl) sulfonyl] imide-co-ethylene dimethacrylate) monolith embedded with Fe₃ O₄ nanoparticles was facile fabrication in a capillary and employed as microextraction column. Subsequently, a magnetic coil adopted to produce variable magnetic fields during extraction stage was twined on the microextraction column. The analytes contents in eluant were quantified by high performance liquid chromatogram with diode array detector. Various parameters affecting the extraction performance were inspected and optimized in detail. Results revealed that the exertion of magnetic fields in adsorption and desorption steps enhanced the extraction efficiencies of analytes from 44.9-64.0% to 78.6-87.1%. Under the optimal extraction factors, the limits of detection were between 0.012 and 0.061 μg/L, relative standard deviations for precision in terms of intra- and inter-day assay variability ranged from 1.9 to 9.8%. The introduced approach was successfully applied to simultaneously quantify the contents of five analytes in real fruit juices with satisfying fortified recoveries (80.1-116%). The obtained results well demonstrate the promising potential of the developed method in the highly sensitive quantification of trace phenolic acids in complex samples.

Magnetic-molecularly imprinted polymers in electrochemical sensors and biosensors

Magnetic particles, as well as molecularly imprinted polymers, have revolutionized separation and bioanalytical methodologies in the 1980s due to their wide range of applications. Today, biologically modified magnetic particles are used in many scientific and technological applications and are integrated in more than 50,000 diagnostic instruments for the detection of a huge range of analytes. However, the main drawback of this material is their stability and high cost. In this work, we review recent advances in the synthesis and characterization of hybrid molecularly imprinted polymers with magnetic properties, as a cheaper and robust alternative for the well-known biologically modified magnetic particles. The main advantages of these materials are, besides the magnetic properties, the possibility to be stored at room temperature without any loss in the activity. Among all the applications, this work reviews the direct detection of electroactive analytes based on the preconcentration by using magnetic-MIP integrated on magneto-actuated electrodes, including food safety, environmental monitoring, and clinical and pharmaceutical analysis. The main features of these electrochemical sensors, including their analytical performance, are summarized. This simple and rapid method will open the way to incorporate this material in different magneto-actuated devices with no need for extensive sample pretreatment and sophisticated instruments.

Prenylated Trans-Cinnamic Esters and Ethers against Clinical Fusarium spp.: Repositioning of Natural Compounds in Antimicrobial Discovery

Onychomycosis is a common nail infection mainly caused by species belonging to the F. oxysporum, F. solani, and F. fujikuroi species complexes. The aim of this study was to evaluate the in vitro susceptibility of six representative strains of clinically relevant Fusarium spp. toward a set of natural-occurring hydroxycinnamic acids and their derivatives with the purpose to develop naturally occurring products in order to cope with emerging resistance phenomena. By introducing a prenylated chain at one of the hydroxy groups of trans-cinnamic acids 1–3, ten prenylated derivatives (coded 4–13) were preliminarily investigated in solid Fusarium minimal medium (FMM). Minimal inhibitory concentration (MIC) and lethal dose 50 (LD₅₀) values were then determined in liquid FMM for the most active selected antifungal p-coumaric acid 3,3′-dimethyl allyl ester 13, in comparison with the conventional fungicides terbinafine (TRB) and amphotericin B (AmB), through the quantification of the fungal growth. Significant growth inhibition was observed for prenylated derivatives 4–13, evidencing ester 13 as the most active. This compound presented MIC and LD₅₀ values (62–250 µM and 7.8–125 µM, respectively) comparable to those determined for TRB and AmB in the majority of the tested pathogenic strains. The position and size of the prenylated chain and the presence of a free phenol OH group appear crucial for the antifungal activity. This work represents the first report on the activity of prenylated cinnamic esters and ethers against clinical Fusarium spp. and opens new avenues in the development of alternative antifungal compounds based on a drug repositioning strategy.

Preparation of surface molecularly imprinted polymer and its application for the selective extraction of teicoplanin from water

In this study, a new surface molecularly imprinted polymer (SMIP) of teicoplanin (TEC) was prepared in an aqueous solution using amino-modified silica gel as a carrier. The molar ratio of the template molecule, functional monomer and cross-linker in the optimized synthesis system was 1 : 15 : 40. The structure and morphology of SMIP were characterized by Fourier-transform infrared spectra and scanning electron microscopy, respectively. It was shown that the silica gel modified with different active groups; the type and structure of functional monomers have a great influence on the specificity of SMIP. The SMIPs synthesized from a series of methacrylic acid and its hydroxylalkyl esters as functional monomers have good specificity for TEC. The results of static adsorption experiments showed that the adsorption capacity of SMIP was 6.5 times that of non-molecularly imprinted polymer, which were 152.6 mg g⁻¹ and 23.6 mg g⁻¹, respectively, indicating that SMIP had a larger affinity for TEC. Finally, the SMIP was successfully used as a dispersive solid-phase extraction adsorption material to selectively extract and enrich TEC from the water sample. The limit of detection of the proposed liquid chromatographic method for TEC was 5 μg L⁻¹.

A novel surface molecularly imprinted polymer for specific absorbing teicoplanin in environmental water.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Simultaneous extraction of several targets by using non-toxic dual template molecularly imprinted polymers in vivo and in vitro

In this report, a non-toxic Dual Template Molecularly Imprinted Polymers (DMIPs) was synthesized with quercetin and schisandrin b as template molecules, using deep-eutectic solvents as functional monomers for the first time. The DMIPs were used to efficiently and simultaneously enrich quercetin and schisandrin b from the mixed crude extracts of penthorum and schisandra. The results indicated that the DMIPs exhibited rapid adsorption kinetics (80 min for adsorption equilibrium) and high selectivity. The largest adsorbing capacities to quercetin and schisandrin b were 23.58 mg/g and 41.64 mg/g, respectively. After presaturation with quercetin and schisandrin b, the nontoxic saturated DMIPs were fed to the mice. Blood samples of the mice were taken and both quercetin and schisandrin b were successfully detected. The pharmacokinetics of quercetin and schisandrin b were similar to reports in the literature where mice were directly fed with botanicals. Our study provides a reliable protocol such that DMIPs can be used to separate and enrich several target molecules simultaneously from complex biological systems. Our findings suggested that the DMIPs have potential application as a drug delivery system of compound herbal formulas.

Comparison of Four Adsorption Isotherm Models for Characterizing Molecular Recognition of Individual Phenolic Compounds in Porous Tailor-Made Molecularly Imprinted Polymer Films

A molecularly imprinted polymer (MIP) film using catechol as the template was designed for adsorption of a range of phenols from water. Four different isotherm models (Langmuir (LI), Freundlich (FI), Langmuir-Freundlich (L-FI), and Brunauer, Emmett, and Teller (BET)) were used to study the MIP adsorption of five phenolic compounds: phenol (Ph), 2-methylphenol (2-MP), 3-methylphenol (3-MP), 2-chlorophenol (2-CP), and 4-teroctylphenol (4-OP). Each model was evaluated for its fit with the experimental data, and key parameters, including a number of binding sites and binding site energies, were compared. Though the LI, L-FI, and BET models showed good agreement for estimation of the number of binding sites and affinity for most adsorbates, no single model was suitable for all. The LI and L-FI models gave the best fitting statistics for the Ph, 2-MP, 3-MP, and 2-CP. The recognition of 4-OP, which has much higher binding affinities than the smaller phenolic compounds not attributable to hydrophobicity alone, was explained only by the BET model, which indicates the formation of multilayers. The BET model failed only with phenol. MIPs also showed higher adsorption capacities and improved homogeneity over the analogous non-imprinted polymers.

Magnetic hyperbranched molecularly imprinted polymers for selective enrichment and determination of zearalenone in wheat proceeded by HPLC-DAD analysis

A novel magnetic surface molecular imprinted polymers with 2, 4, 6-trisacrylamido-3, 5-triazine (TAT) as a functional monomer was successfully synthesized and used for the enrichment and determination of zearalenone. The molecular imprinting is reported herein at first time for application of zearalenone in wheat. The magnetic imprinted materials possessed excellent magnetism and uniform appearance, which were characterized by fourier transform infared spectroscopy and transmission electron microscope. The results proved the magnetic molecular imprinted polymers was successfully prepared. The magnetic molecular imprinted polymers exhibited satisfactory sensitivity, stability and potential reusability. The binding affinity was investigated by selectivity experiment, which possessed high selectivity. To obtain the optimal application conditions, the amount of adsorption, extraction time, elution solvent and time were optimized. The limited detection of zearalenone was 0.55 ng g^-1 and the recoveries of zearalenone were 92.1-96.0%. The relative standard deviation was lower than 5.4%. This indicated that a simple, efficient and low-cost method was established and successfully applied in spiked wheat sample.

Debittering of lemon juice using surface molecularly imprinted polymers and the utilization of limonin

In this work, surface molecularly imprinted polymers (SMIPs) were prepared as a specific sorbent to remove the limonin from the lemon juice for the first time, and then the MIPs containing limonin were directly made into a water-soluble gel to treat inflammation of mice. The resulting polymers were characterized by scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectrometer spectra. And the polymerization conditions and adsorption performances of the resultant nanomaterials were further investigated in detail. Results showed that the MIPs have higher adsorption capacity (27.72 mg/g) compared with surface molecularly non-imprinted polymers (NIPs) (8.12 mg/g). The selectivity experiment indicated that the polymers had excellent selective recognition for limonin and the selectivity factors were calculated as 2.75 and 1.83 for nomilin and obakunone, respectively. The MIPs were successfully used as adsorbent for selectively removing limonin from lemon juice and the MIPs extracted almost all the limonin from lemon juice according to the HPLC results. Furthermore, the MIPs with limonin were processed into water-soluble gel, which can be used to reduce the inflammation and enhance wound healing of model mice.

Enhanced extraction of hydroxytyrosol, maslinic acid and oleanolic acid from olive pomace: Process parameters, kinetics and thermodynamics, and greenness assessment

Three techniques of ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) and solvent extraction (SE) were used for enhancing the hydroxytyrosol (HT), maslinic acid (MA) and oleanolic acid (OA) extraction from olive pomace, being evaluated and compared through process parameters, kinetics and thermodynamics, plus greenness assessment analysis. Results showed that UAE yielded the maximum compounds due to a strong cavitation effect and the strongest mass and heat transfer efficiency involving the kinetic constants (h, C_e and K) and thermodynamic parameters (△H, △S and △G). Additionally, the optimal extraction conditions were acquired: ethanol concentration of 90%, extraction temperature of 50 °C, extraction time of 5 min, liquid to solid ratio of 30 mL/g, ultrasound intensity of 135.6 W/cm², and ultrasound frequency of 60 kHz. UAE was confirmed as an effective and greener technique with the lowest E factor, energy consumption and carbon emission during the extraction process of bioactive compounds from olive pomace.

Selective detection of chloramphenicol based on molecularly imprinted solid-phase extraction in seawater from Jiaozhou Bay, China

This study highlights an efficient sample pre-treatment method for preconcentration and detection of chloramphenicol in marine water using molecularly imprinted solid-phase extraction (MISPE). Chloramphenicol molecularly imprinted microspheres were prepared and evaluated on the base of morphology, capacity and selectivity. The imprinted microspheres exhibited specific recognition and high retention capability to chloramphenicol and were applied as special solid-phase extraction adsorbents. An off-line MISPE protocol has been optimized and a creative analytical method coupled to HPLC-DAD was successfully developed for the cleanup and determination of chloramphenicol in seawater samples. Method performance was satisfactory with recoveries ranging from 81 to 90% and relative standard deviation (RSD) was <4.93% (n = 3). Accuracy of the method was assessed at three spiking concentration levels and the limit of detection was 5 ng L^-1. Finally, five seawater samples from Jiaozhou Bay of China were determined and the results showed that there was no chloramphenicol detected.

Preparation and evaluation of temperature and magnetic dual-responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo-responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N-isopropylacrylamide as the thermo-responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5-100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo-responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature-responsive regulation.

Magnetic Porous Molecularly Imprinted Polymers Based on Surface Precipitation Polymerization and Mesoporous SiO₂ Layer as Sacrificial Support for Efficient and Selective Extraction and Determination of Chlorogenic Acid in Duzhong Brick Tea

Magnetic porous molecularly imprinted polymers (MPMIPs) for rapid and efficient selective recognition of chlorogenic acid (CGA) were effectively prepared based on surface precipitation polymerization using CGA as template, 4-vinylpyridine (4-VP) as functional monomer, and mesoporous SiO₂ (mSiO₂) layer as sacrificial support. A computational simulation by evaluation of electronic binding energy is used to optimize the stoichiometric ratio between CGA and 4-VP (1:5), which reduced the duration of laboratory trials. The porous MIP shell and the rid of solid MIPs by magnet gave MPMIPs high binding capacity (42.22 mg/g) and fast kinetic binding (35 min). Adsorption behavior between CGA and MPMIPs followed Langmuir equation and pseudo-first-order reaction kinetics. Furthermore, the obtained MPMIPs as solid phase adsorbents coupled with high performance liquid chromatography (HPLC) were employed for selective extraction and determination of CGA (2.93 ± 0.11 mg/g) in Duzhong brick tea. The recoveries from 91.8% to 104.2%, and the limit of detection (LOD) at 0.8 μg/mL were obtained. The linear range (2.0–150.0 μg/mL) was wide with R² > 0.999. Overall, this study provided an efficient approach for fabrication of well-constructed MPMIPs for fast and selective recognition and determination of CGA from complex samples.

Preparation and Evaluation of Core⁻Shell Magnetic Molecularly Imprinted Polymers for Solid-Phase Extraction and Determination of Sterigmatocystin in Food

Magnetic molecularly imprinted polymers (MMIPs), combination of outstanding magnetism with specific selective binding capability for target molecules, have proven to be attractive in separation science and bio-applications. Herein, we proposed the core⁻shell magnetic molecularly imprinted polymers for food analysis, employing the Fe₃O₄ particles prepared by co-precipitation protocol as the magnetic core and MMIP film onto the silica layer as the recognition and adsorption of target analytes. The obtained MMIPs materials have been fully characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometer (FT-IR), vibrating sample magnetometer (VSM), and re-binding experiments. Under the optimal conditions, the fabricated Fe₃O₄@MIPs demonstrated fast adsorption equilibrium, a highly improved imprinting capacity, and excellent specificity to target sterigmatocystin (ST), which have been successfully applied as highly efficient solid-phase extraction materials followed by high-performance liquid chromatography (HPLC) analysis. The MMIP-based solid phase extraction (SPE) method gave linear response in the range of 0.05⁻5.0 mg·L-1 with a detection limit of 9.1 µg·L-1. Finally, the proposed method was used for the selective isolation and enrichment of ST in food samples with recoveries in the range 80.6⁻88.7% and the relative standard deviation (RSD) <5.6%.