Incorporation of dietary fiber on the cookie dough. Effects on thermal properties and water availability

Oat flour and β-glucan regulate the quality of cereal flour and cereal products: Unveiling novel physicochemical insights with future perspectives

In the dynamically evolving cereal food industry, the demand for enhanced health properties has surged. The specific dietary requirements of certain patient groups have further intensified this pursuit, thereby driving the expansion of the gluten-free product market. However, refined and gluten-free cereal products often suffer from nutrient loss. Oats, celebrated for their outstanding nutritional profile, have garnered global attention within the realm of cereal products. Despite this, the impacts of adding oats, such as oat (bran) flour and oat β-glucan, on the physicochemical characteristics of cereal flours and the quality of associated products have not been reviewed. This review focuses on these aspects, including the influence on viscosity, thermal stability, viscoelasticity, dough/batter network structure, water distribution, and starch retrogradation, which can be used as mechanisms to explain the effects of oats on the quality of cereal products to some extent. Notably, the concentration, molecular weight, and structure of β-glucan play crucial roles. The effects of oats vary distinctly across diverse cereal products. We have comprehensively summarized these effects and propose strategies to mitigate negative impacts. Whole oats products show potential as gluten-free alternatives, but their associated safety issues must be considered. Meanwhile, large-scale production of oat β- glucan-enriched cereal products in the food industry faces numerous challenges. Looking forward, future research should explore advanced technologies such as genetic modification, spectral imaging, machine learning algorithms, and molecular dynamics simulation. These endeavors are aimed at surmounting the safety and nutritional challenges associated with oats in applications, optimizing the formulations of different cereal products, and fully exploiting the potential of oats in cereal product development.

The Properties of Damaged Starch Granules: The Relationship Between Granule Structure and Water-Starch Polymer Interactions

The morphology of wheat starch granules with different damaged starch (DS) content was analyzed using a particle size analyzer and scanning electron microscopy (SEM); the granular structure was studied using FT-IR spectroscopy and X-ray diffraction (XRD); and the granule-water interaction was evaluated by thermogravimetric analysis (TGA) and dynamic vapor sorption (DVS). The increase in the level of DS shifted the population of B-type granules towards larger particle diameters and shifted the population of A-type granules towards smaller particle diameters. The appearance of the surface of the starch-damaged granules was rough and flaky (SEM images). Crystallinity reductions were related to higher mechanical damage levels of the granular structure (FT-IR and XRD). Higher DS increased the liquid-water absorption capacity of the granules. Higher DS was associated with increments in less-bound water proportions and reductions in more strongly bound water proportions and related to reductions in the evaporation temperature of these water populations (TGA analyses). Concerning DVS data, the results suggested that the driving force for water-monolayer attachment to the starch granules decreased as DS increased. Therefore, it was suggested that the changes in granule structure led to a weaker water-starch polymer chain interactions due to the increase in DS. The results contribute to a better understanding of the influence of mechanical damage on the starch granular structure, which could be related to the rheological and thermal behavior of starch-based systems with different DS.

A review on the hydration properties of dietary fibers derived from food waste and their interactions with other ingredients: opportunities and challenges for their application in the food industry

Dietary fiber (DF) significantly affects the quality attributes of food matrices. Depending on its chemical composition, molecular structure, and degree of hydration, the behavior of DF may differ. Numerous reports confirm that incorporating DF derived from food waste into food products has significant effects on textural, sensory, rheological, and antimicrobial properties. Additionally, the characteristics of DF, modification techniques (chemical, enzymatic, mechanical, thermal), and processing conditions (temperature, pH, ionic strength), as well as the presence of other components, can profoundly affect the functionalities of DF. This review aims to describe the interactions between DF and water, focusing on the effects of free water, freezing-bound water, and unfreezing-bound water on the hydration capacity of both soluble and insoluble DF. The review also explores how the structural, functional, and environmental properties of DF contribute to its hydration capacity. It becomes evident that the interactions between DF and water, and their effects on the rheological properties of food matrices, are complex and multifaceted subjects, offering both opportunities and challenges for further exploration. Utilizing DF extracted from food waste exhibits promise as a sustainable and viable strategy for the food industry to create nutritious and high-value-added products, while concurrently reducing reliance on primary virgin resources.

Valorisation of apple pomace for the development of high-fibre and polyphenol-rich wheat flour cookies

Apple pomace, abundant in dietary fibre and polyphenols, often goes unutilized, contributing to environmental pollution as it is discarded in open fields of Jammu and Kashmir. This study aimed to develop functional cookies fortified with apple pomace powder (APP), an industrial by-product. Wheat flour-APP formulations (0%, 5%, 10%, and 15%) were assessed. APP addition notably affected color values and functional properties, enhancing water and oil absorption capacities, swelling power, foam capacity and stability. Phenolic content increased significantly (p < 0.05) post-fortification, elevating antioxidant properties. FT-IR spectroscopy identified distinctive chemical components in wheat flour and APP. Sensory evaluation favored cookies with 10% APP, indicating their potential for consumer acceptance. Thus, APP shows promise for producing innovative functional cookies, improving consumer health, utilizing industrial by-products, and reducing waste from apple processing plants, thereby mitigating environmental pollution.

Effect of different fibre addition on cookie dough and texture

Different commercial fibres from bamboo (BAM), cocoa (COC), psyllium (PSY), chokeberry (ARO) and citrus (CIT) were characterized for technological (oil- and water-holding capacity, solubility and bulk density) and physical (moisture, colour and particle size) features and added to a cookie recipe. The doughs were prepared using sunflower oil and white wheat flour was substituted with 5% (w/w) of the selected fibre ingredient. The attributes of the resulting doughs (colour, pH, water activity and rheological tests) and cookies (colour, water activity, moisture content, texture analysis and spread ratio) were compared to control doughs and to cookies made with refined flour and whole flour formulation. The selected fibres consistently impacted dough rheology and, consequently on, the spread ratio and the texture of the cookies. While the viscoelastic behaviour of the control dough made with refined flour was maintained in all sample doughs, adding fibre decreased loss factor (tan δ), except for ARO-added dough. Substitution of wheat flour with fibre decreased the spread ratio except for the PSY addition. The lowest spread ratio values were observed for CIT-added cookie, which were similar to whole flour cookies. The addition of phenolic-rich fibres positively affected the in vitro antioxidant activity of the final products.

Investigation of oligosaccharides and allulose as sucrose replacers in low-moisture wire-cut cookies

Non-digestible oligosaccharides (OS) and allulose have beneficial health properties and could reduce the amount of added sugar in baked goods. In this study allulose and various OS [fructo-oligosaccharides (FOS), galacto-oligosaccharides (GOS), lactosucrose (LOS), isomalto-oligosaccharides (IMO), Promitor 70R (P70R), and xylo-oligosaccharides (XOS)] were added to a wire-cut cookie formulation at concentrations determined to have similar effects on the gelatinization temperature (Tgel) of starch relative to sucrose. Different baking performance attributes of the doughs and cookies were assessed, including: appearance, spread, color, texture, and % moisture loss after baking. The results were correlated to: OS solution and solid properties and OS effects on starch thermal events (gelatinization, pasting, and retrogradation). The Tgel-matching formulation protocol was effective in producing reduced-sugar cookies which had similar appearance, color, and spread attributes compared to the sucrose control; however, cookie texture significantly varied. Cookies containing allulose were the least similar to the control, having darker color, reduced spread, and softer cake-like texture. The only OS cookies that matched the texture of the sucrose control contained LOS, while P70R cookies were the hardest. Cookie texture correlated strongly with the % total moisture loss after baking (r = -0.8763) and was best explained by OS solution viscosity: more viscous OS solutions limited moisture release and resulted in harder cookies. The Tgel of starch also correlated with OS solution viscosity (r = 0.7861) and should be accounted for in reduced sugar applications. The OS recommended as sucrose replacers in cookies based on principal component analysis groupings were: XOS > IMO > LOS > and GOS.

Casein/butyrylated dextrin nanoparticles and chitosan stabilized bilayer emulsions as fat substitutes in sponge cakes

This study aimed to evaluate the potential of the bilayer emulsions stabilized with casein/butyrylated dextrin nanoparticles and chitosan as fat substitutes in preparing low-calorie sponge cakes. Among the different cake groups, the substitution of bilayer emulsions at 60% exhibited comparable baking properties, appearance, texture characteristics and stable secondary structure to fat. The specific volume and height were increased by 36.94% and 22%, respectively, while the cake showed higher lightness (L*) in the cores and softer hardness in the crumb. In addition, the moisture content of cakes was increased while the water activity remained unchanged. These results showed that casein/butyrylated dextrin bilayer emulsion was a potential fat substitute for cake products at the ratio of 60% with the desirable characteristics.

Evaluation of glucomannan as a fat replacer in the dough and cookies made from fermented cassava flour and soy protein concentrate

This work evaluated the structure and quality parameters of dough and cookies prepared using fermented cassava flour, soy protein concentrate, and glucomannan. Glucomannan was incorporated as a fat replacement. The levels of fat replacement were 0%, 10%, 20%, and 30% (CS100, GL90, GM80, and GH70, respectively) relative to the original fat content. Rheological analysis showed that the loss tangent of GH70 dough was the lowest (0.39) with an angular frequency of 0.62 rad/s. Thus, glucomannan affected the dough and caused it to exhibit more solid-like behaviors. Glucomannan covered the starch granules, which mimicked that of fat. A complex interaction was confirmed among starch, glucomannan, and protein in the dough. Glucomannan decreased dough hardness and adhesiveness but significantly increased (p < 0.05) cookie hardness, crispiness, and spread ratio. Dough with low rheological properties, adhesiveness, and hardness will produce good-quality cookies. Glucomannan can be applied as a fat replacer in cookies.

Sorghum (Sorghum bicolor L. Moench) Gluten-Free Bread: The Effect of Milling Conditions on the Technological Properties and In Vitro Bioaccessibility of Polyphenols and Minerals

The absence of gluten proteins in sorghum allows for the production of baked goods that are suitable for celiacs. Previous studies have shown that the milling process affects the performance of sorghum flour in baked products, especially those that are gluten-free (GF). This study aimed to explore the effects of mill type (impact and roller) on flour properties and GF bread quality by assessing the technological quality, antioxidant activity, and mineral content of the bread. All particle populations of flour obtained via both millings presented a bimodal distribution, and the volume mean diameter (D 4,3) ranged from 431.6 µm to 561.6 µm. The partially refined milled flour obtained via polishing and impact milling produced bread with a soft crumb, fewer but larger alveoli in the crumb, and a structure that did not collapse during baking, showing the best performance in bread quality. In the in vitro bread digestibility assay, the total polyphenol content and antioxidant activity decreased during the digestion steps. High mineral (Cu, Fe, Mn, and Zn) contents were also found in a portion of the bread (120 g) made with whole sorghum flour; however, their potential bioavailability was reduced in the presence of a higher amount of bran.

Characterization of pea processing by-product for possible food industry applications

Pea pods are by-products of the pea processing industries which are often disposed improperly but are rich reserves of nutrients. In this work, pea pod powder (PPP) was prepared and analysed for its nutritional, physical, functional and structural characteristics for food applications. Results showed that PPP contained 6.3% moisture, 5.2% ash, 3.5% crude fat, 13.3% crude protein, and 35.3% dietary fiber. Further, PPP exhibited 0.47 g/ml bulk density, 0.50 g/ml aerated bulk density, 0.62 g/ml tapped bulk density and had fair flowability as determined by Hausner's ratio and Carr's index. PPP also showed good functional characteristics with 3.24 g/g water absorption index, 7.9% water solubility index, 1.25 g/g oil absorption capacity, and 4.65% swelling power. Based on its excellent qualities, PPP was used to prepare cookies which were analyzed for its structural and spectral characteristics. The X-ray diffraction pattern of PPP and cookies revealed that the crystalline region in the latter remained intact. The FTIR spectra showed the presence of different functional groups in PPP and cookies. The study showed that PPP could be utilized as a beneficial ingredient in dietetic products such as baked goods due to its good water-holding capacity, oil-holding capacity and dietary fiber content.

Extraction and characterization of waxy and normal barley β-glucans and their effects on waxy and normal barley starch pasting and degradation properties and mash filtration rate

Interactions between β-glucan and starch influence the health benefits of barley-based foods and barley brewing performance. Here, we characterized β-glucans from waxy and normal barley varieties and compared the effects of different β-glucans on the pasting and degradation of waxy and normal barley starches as well as the filterability of mashes from unmalted waxy and normal barley. Waxy barley Zangqing18 β-glucan displayed more compact micrographic features, higher molecular weight, larger particle size, higher thermal decomposition temperature and lower rheological viscosity than normal barley Zangqing2000 β-glucan. β-Glucan not only significantly decreased the pasting viscosities of waxy and normal starches but also lowered the pasting temperatures and peak times of normal starch, likely by inhibiting granule swelling and disrupting the integrity of the continuous phase. β-Glucan also decreased in vitro digestion extent of starch and increased the resistant starch. The unmalted waxy barley had a mash filtration rate much faster than normal barley because starch and β-glucan in waxy barley were rapidly and completely digested and formed more open filter passages. The effects of β-glucan on starch properties varied with the types and contents of β-glucans, whilst the types of starches showed more significant effects. CHEMICAL COMPOUNDS STUDIED: β-Glucan (Pubchem CID: 439262); Amylopectin (Pubchem CID: 439207); Starch (Pubchem CID: 156595876).

Enrichment of Starch Desserts with the Addition of Apple Juice and Buckwheat Fiber

Buckwheat hulls which are rich in fiber are good ingredients to increase the nutritional value of food products. The aim of this study was to determine the effect of the applied additives in the form of fiber and apple juice on the properties of both potato and corn starch (normal and waxy). In order to characterize the rheological properties of kissel, the pasting characteristic was measured. In the obtained gels, the basic quality parameters were determined. The analysis of texture, color parameters, and also total polyphenol content were determined. Buckwheat hulls, in addition to their high fiber content, are a valuable source of phenolic compounds and can be a great additive in starch desserts. The addition of buckwheat hulls and apple juice improved the nutritional value of the final products but also caused changes in the technological qualities: it increased the initial temperature of potato starch mixtures (by approx. 9 °C); it decreased the viscosity of cold desserts (from 8 to 55%); and increased the hardness of the final product by more than 7 times. In the case of other starches, the recorded changes were much smaller than for potato starch-based products.

Physical, Nutritional, and Bioactive Properties of Mandacaru Cladode Flour (Cereus jamacaru DC.): An Unconventional Food Plant from the Semi-Arid Brazilian Northeast

In this study, we evaluated the physical, nutritional, and bioactive properties of mandacaru cladode flour (Cereus jamacaru DC.). The granulometric profile revealed particles with non-uniform geometry, flakiness, a rectangular tendency, and a non-homogeneous surface, with particle sizes ranging from 20 to 60 µm. The flour presented low water activity (0.423), a moisture content of 8.24 g/100 g, high ash (2.82 g/100 g), protein (5.18 g/100 g), and total carbohydrate contents (74.48 g/100 g), and low lipid contents (1.88 g/100 g). Mandacaru flour is an excellent source of insoluble dietary fiber (48.08 g/100 g), calcium (76.33%), magnesium (15.21%), and potassium (5.94%). Notably, ¹H NMR analysis revealed the presence of N-methyltyramine. Using HPLC chromatography, glucose was identified as the predominant sugar (1.33 g/100 g), followed by four organic acids, especially malic acid (9.41 g/100 g) and citric acid (3.96 g/100 g). Eighteen phenolic compounds were detected, with relevant amounts of kaempferol (99.40 mg/100 g), myricetin (72.30 mg/100 g), and resveratrol (17.84 mg/100 g). The total phenolic compounds and flavonoids were 1285.47 mg GAE/100 g and 15.19 mg CE/100 g, respectively. The mean in vitro antioxidant activity values were higher using the FRAP method (249.45 µmol Trolox TEAC/100 g) compared to the ABTS^•+ method (0.39 µmol Trolox TEAC/g). Finally, the ascorbic acid had a content of 35.22 mg/100 g. The results demonstrate the value of mandacaru as a little-explored species and an excellent matrix for the development of flours presenting good nutritional value and bioactive constituents with excellent antioxidant potential.

Lignocellulose, dietary fibre, inulin and their potential application in food

In recent years, due to food insecurity, lignocellulose, dietary fibre as well as inulin have received wider attention owing to their abundance and being relatively low-cost indigestible polysaccharides. Since the recognition, acceptance of the consumption and utilization of these polysaccharides, as well as their attraction in science and industry has grown tremendously. There have been further researches carried out to ascertain the fact that people who consume or utilize these polysaccharides have low exposure to some fatal life-threatening illnesses. Rich sources of indigestible polysaccharides such as vegetables, cereals, fruits and nuts are beneficial to good health as consuming them reduce the occurrence of degenerating diseases such as colon cancer, heart disease, diabetes, etc. Despite these increasing facts depicting their advantages in the state of human health, their intake and utilization still fall below the acceptable limit and the knowledge of how they work in the human body are minimal with their explicit actions not easily shown. Hence, this review gives a better understanding of the significance of lignocellulose, dietary fibre and inulin, their functions, classifications, types and applications in the food industry, thereby exposing their various uses as these polycarbohydrates were considered a waste before now.

Effects of soybean oil on rheological characteristics of dough under high hydrostatic pressure

In order to improve the stability of dough with soybean oil, this paper explored the effect of soybean oil addition on the rheological characteristics of dough under high hydrostatic pressure. The results showed that, compared with the dough without soybean oil, the β-sheet, disulfide bonds content and gauche-ganche-ganche in the dough increased by 4.23%, 0.85 μmol/g and 4.16% respectively when the dough was added with 6% soybean oil, which improved the degree of cross-linking polymerization of gluten protein and the stability of gluten network. Meanwhile, the dough had the highest elastic modulus and the lowest maximum creep compliance (6.85 Pa^-1 ×10^-4 ), indicating that 6% soybean oil significantly increased the elasticity and hardness of the dough. The results of short-range ordered structure and paste properties showed that with the addition of soybean oil, the ordered structure and paste viscosity decreased with the increase of soybean oil.

Designing Nutritious and Sustainable Biscuits Using Upcycled Fibre-Rich Ingredients Obtained by Hot Air - Microwave Drying of Orange by-Products

Circular use of resources implies developing mild processes to transform food by-products into value-added products, without using organic solvents or extensive washing and drying steps. Refined ingredients are commonly used in gluten-free bakery resulting in high levels of saturated fatty acids and sugars as well as a lack of essential nutrients like dietary fibres. The objective of this study was (i) to compare the nutritional composition and the water retention capacity (WRC) of an upcycled orange fibre dried by hot air combined with microwave (HAD+MW) and a commercial orange fibre obtained by different methods (COM), and (ii) to compare the nutritional, texture and sensory profile of gluten-free biscuits formulated with HAD+MW and with COM fibres. The total dietary fibre content (72.0 ± 3.0%) and WRC (21.1 ± 2.7 g_water/ g) of HAD+MW fibre did not differ from the nutritional composition of the control orange fibre (COM). However, for HAD+MW fibre, protein (+2.34 fold), fat (-4.75 fold), ash (-2.31 fold), sugars (-1.42 fold) and moisture content (+11.5 fold) was different from COM. Instrumental texture analysis showed that biscuits with HAD+MW fiber resulted in less hardness (26%) than those with COM fiber. However, this difference was not perceived by panellists (p > 0.05). Exterior colour, cereal, vanilla and citrus aroma-flavour, and granularity were slightly more intense in HAD+MW biscuits but still similar to the commercial control fiber. Thus, the HAD+MW drying method can be used for upcycling orange by-products, obtaining less refined and more nutritious and sustainable ingredients for fiber-enrichment of gluten-free biscuits.

Effect of sorghum flour properties on gluten-free sponge cake

As the demand for gluten-free products increases, the use of sorghum flour becomes a good alternative. Sponge cakes are consumed worldwide and suitable for formulations that could replace wheat flour. One of the most influential parameters on sponge cake quality is the flour particle size. In this study, we obtained and characterized different flours by milling white and brown sorghum grains and evaluated the influence of flour characteristics on batter properties and gluten-free sponge cake quality. Flours were produced by pearling, milling and sifting; and were characterized for flour composition, particle size distribution, damaged starch and water absorption. The structure, density, and viscosity of the batters; and specific volume and crumb properties of the sponge cake were evaluated. The results showed that flour composition, and properties were modified by the milling processes. Pasting viscosity increased as the particle size of the flours was reduced. Brown or white sorghum flour with smaller particle size produced high density and viscosity batters with small and homogeneous air bubbles distribution. Independently of the sorghum variety used, smaller particle size flour leads to sponge cakes of high volume and low firmness.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13197-021-05150-0.

Effects of Konjac glucomannan with different viscosities on the rheological and microstructural properties of dough and the performance of steamed bread

Konjac glucomannan (KGM) is used as an additive to improve the properties of wheat products. The effects of three types of KGM on the rheological properties and microstructure of dough, as well as the performance of steamed bread were investigated in this study. Particularly, dough with KGM displayed new features such as reduced peak viscosity, breakdown and setback. As the viscosity of KGM increased, the stability of the dough structure increased, while the viscosity and fluidity of the dough decreased. More interestingly, the gluten film of dough also increased with increasing substitution level and viscosity of KGM. Consistently, KGM with higher viscosity improved the quality of steamed bread. Generally, three types of KGM have different effects on the rheological characteristics and microstructure of dough, as well as the performance of steamed bread, which provide useful information for the proper application of KGM in wheat-based foods.

Effect of Structurally Different Pectin on Dough Rheology, Structure, Pasting and Water Distribution Properties of Partially Meat-Based Sugar Snap Cookies

Pectin has been widely used as a hydrocolloid in foods, but its effectiveness based on hydrodynamics radius (Rh), average side chain length (ACL) and degree of esterification (DE) has been less studied. This study investigated the effect of 4 types of pectin (with different molecular weight and structures) at a level of 1.5% w/w of wheat flour on functional, structural and water binding properties of sugar snap cookies partially substituted with fish meat. The results showed that pectin (CU-201 and CU-601) with higher ACL and Rh controlled excessive expansion, while the improved rheology of dough in terms of behavior as viscous matrix compared to control and other pectin. Texture was found to be highly dependent on Rh and ACL compared to DE of pectin. The pasting properties, especially peak viscosity and final viscosity, were significantly (p < 0.05) increased with increasing DE, as well as ACL, by entangling and increasing the interaction between starch and pectin. The scanning electron microscopy (SEM) analysis exhibited that control sample showed wide voids and more intercellular spaces, while samples prepared with CU-601, CU-201, and CUL displayed compact structure, which was also evidenced by controlled expansion and improved hardness of the cookies. Low field nuclear magnetic resonance (LF-NMR) analysis showed that T21 relaxation time and amplitude were found to be shorter for CU-601 and CU-201 treatments, signifying the high amount of tightly bound water compared to control. The findings endorse the feasibility of adding CU-601, and CU-201 as an efficient hydrocolloid for the improved structural and functional properties of cookies.

Effects of β-glucan and various thermal processing methods on the in vitro digestion of hulless barley starch

This study explored the effects of β-glucan and various processing methods on the digestion of hulless barley starch in vitro. The whole hulless barley showed significantly lower starch digestibility compared to that hydrolyzed by β-glucanase, indicating that β-glucan had inhibitory effects on starch digestion. However, β-glucan slightly accelerated the hydrolysis of extracted starch. Microscope observations of grains and flours revealed that the inhibitory effects of β-glucan benefited from the integral cellular structure of hulless barley. Besides, the hulless barley processed through flaking-roasting and stir-frying exhibited significantly lower starch digestibility (41.5% and 38.9%, respectively) and considerable intact cells and starch granules. The hulless barley processed by steam flash-explosion showed moderate starch digestibility (48.2%), which may be attributed to the encapsulation of starch-protein-β-glucan complexes. This elucidated the possible mechanism of β-glucan limiting the hydrolysis of hulless barley starch and provided useful direction to produce hulless barley products with desirable starch digestibility.

Effect of oil pomaces on thermal properties of model dough and gluten network studied by thermogravimetry and differential scanning calorimetry

Thermal analyses were used to determine thermal properties and transitions in model dough and gluten network induced by five oil pomaces obtained from seeds of black seed, pumpkin, hemp, milk thistle and primrose. The model dough was supplemented with 3%, 6% and 9% of the pomaces. Analysis of TGA parameters of supplemented model dough and gluten showed that both objects were thermally stable. However, analysis of difference TGA thermograms indicated that samples supplemented with pomaces differ in thermal behaviour. The differences were confirmed by DSC results. In the case of model dough, supplementation caused appearance of two endothermic peaks at ca. 295 and 340 °C and significant increase in transition enthalpy. Modified gluten thermograms showed one exothermic peak at 280 °C which enthalpy changed slightly with increase in pomace content. The present results indicated that model dough is characterized by more ordered structure comparing to control and gluten samples.

Effect of Wholewheat Flour Particle Shape Obtained by Different Milling Processes on Physicochemical Characteristics and Quality of Bread

Research background

Wholewheat flour is a very good source of nutritional compounds and functional ingredients for human diet. However, it causes negative effect on bread quality. Different milling techniques can be used to obtain wholewheat flour, minimizing the negative effect of both bran and germ on bread quality. The aim of this work is to study the effect of particle size and shape of wholegrain flour on the interaction among the different components, water distribution, dough rheology and bread volume.

Experimental approach

Wholewheat flour of three varieties (Klein Rayo, Fuste and INTA 815) was obtained in cyclonic, hammer and roller mills. The characteristics of wholewheat flour were explored, and the water distribution and rheological properties of dough were determined by thermogravimetric analysis and Mixolab test, respectively. Finally, microscale bread was prepared.

Results and conclusions

The amount of water-soluble pentosans, damaged starch and wet gluten was affected by the milling procedure. Regarding dough rheological properties, wholewheat flour obtained in hammer mill had the lowest water absorption capacity and the highest developing time. This result could be mainly attributed to particle shape in these samples with large amount of endosperm attached to the bran, hindering protein unfolding. Thermogravimetric analysis showed that both fine and large bran particle size seem to have the same effect on water properties in wholewheat dough during heating. Bread made with Klein Rayo variety had the highest specific volume, indicating that wheat with high protein content and breadmaking quality is needed to make wholewheat bread. The results of this work showed that particle shape, rather than particle size, affected the quality of wholewheat flour for breadmaking.

Novelty and scientific contribution

The effect of milling type and particle shape of the wholewheat flour had a greater effect than the wheat variety. Thus, the wholegrain milling process should be carefully selected taking to account the shape of the produced particle. This may open new opportunities for developing wholewheat bread with better acceptance by consumers.

Study on the functional properties and structural characteristics of soybean soluble polysaccharides by mixed bacteria fermentation and microwave treatment

The soybean soluble polysaccharide was prepared by mixed fermentation of lactic acid bacteria and Neurospora crassa and microwave treatment. The functional properties and structure characteristics of soybean soluble polysaccharide before and after modification were compared. Results revealed that after fermentation treatment, the content of soybean soluble polysaccharide increased to 7.09%, which was 3.16 times that of raw materials, and the microwave treatment was further increased to 7.69%. The glucose adsorption capacity, glucose dialysis retardation index and the α-amylase activity inhibition ration of soybean soluble polysaccharides increased significantly, promotes intestinal flora growth in vitro after fermentation of mixed bacteria and microwave treatment. At the same time, the analysis of monosaccharide composition and structural characteristics showed that the monosaccharide components of soybean soluble polysaccharide were redistributed after modification treatment, Scanning electron microscopy showed that modified soybean soluble polysaccharide has a larger surface area; Fourier Transform Infrared spectroscopy and X-ray Diffraction proved that the modification has slight changes in the functional groups and crystal structure of soybean soluble polysaccharide. These results suggested that okara may be a potentially inexpensive source of natural soybean soluble polysaccharide and a potential functional food ingredient.

From Orange Juice By-Product in the Food Industry to a Functional Ingredient: Application in the Circular Economy

In the orange juice industry, more than 50% of raw material becomes by-products that are rich in active compounds and have high nutritional content. Improved use of these by-products could represent a key strategy for a circular economy. The objective of this study was to produce a flour from orange juice by-product, characterize it, and then apply this flour to produce cookies. Orange by-product flour (OBPF) was characterized in terms of its chemical composition, dietary fiber, phenolic compounds, antioxidant potential, and hygroscopic properties. Subsequently, the effect of substituting wheat flour by OBPF in cookies was evaluated. OBPF presented a very high content of dietary fiber (73.61% dry matter (DM)), minerals (ash = 2.72% DM), and total phenolic compounds (534 ± 30 mg gallic acid equivalent (GAE)/100 g of DM). In general, the properties of cookies were not significantly influenced by using OBPF as a substitution for wheat flour. Sensorial analyses showed that cookies produced with 10% OBPF presented the higher scores. Therefore, OBPF showed interesting characteristics, suggesting its possible use in the development of fiber enriched foods such as cookies; and its production represents a key strategy for the orange juice processing industries towards the application of a circular economy in the food system.

Effect of Konjac Glucomannan on Sensory, Physical and Thermal Properties of Mochi

Mochi is a popular snack in Asia, but few studies explored applications of konjac glucomannan (KGM) combined with mochi. The textural and thermal properties, sensory and microstructural changes were measured from mochi, which performed mainly from glutinous rice flour and KGM blends of which KGM shared 1–5 %. About 1–3 % KGM substitution could improve sensory qualities of mochi. The color of mochi with different KGM concentration could be distinguished by the naked eye. The variants with 4–5 % KGM concentration exhibited high hardness, stickiness of texture parameters, and obvious changes in temperature peak of thermodynamic parameters. The reticular gelatinized microstructures of mochi showed increased aperture of cavities with enhanced matrix surrounded. These changes could be due to high water binding capacity of KGM. In general, 3 % KGM concentration could lead to desirable sensory and textural properties of mochi, indicating a potential of KGM for widespread usage in glutinous rice starch-based foods industry.

Rapid in situ analysis of l-histidine and α-lactose in dietary supplements by fingerprint peaks using terahertz frequency-domain spectroscopy

A simple, green and nondestructive method based on terahertz fingerprint peaks has been developed for rapid in situ analysis of l-histidine and α-lactose in dietary supplements. Fingerprint absorption peaks of l-histidine and α-lactose located at 0.77 and 0.53 THz could be directly used for identification and quantitation of these analytes in commercial dietary supplements. Compared with the partial least squares regression model (PLSR), the linear least squares regression (LLSR) method based on peak areas presented better performance, with the linear correlation coefficients of 0.9899 and 0.9910 for l-histidine and α-lactose, respectively. Furthermore, analysis time per sample can be shortened to less than 1 min due to the narrower spectral acquisition region. The accuracies were 94.8-110% and 98.9-110%, comparable to those of ion chromatography for l-histidine and high-performance liquid chromatography for α-lactose. The results presented great potential of the developed method for rapid in situ analysis of nutrients in dietary supplements.

Rethinking the Future of Food Packaging: Biobased Edible Films for Powdered Food and Drinks

In today's society, packaging is essential. Without this, the materials would be messy and ineffective. Despite the importance and key role of packaging, they are considered to be useless, as consumers see it as a waste of resources and an environmental threat. Biopolymer-based edible packaging is one of the most promising solutions to these problems. Thus, inulin, biopolymers such as agar and sodium alginate, and glycerol were used to develop a single use edible material for food packaging. These biofilms were obtained and tested for three months. For inulin-based films, the results highlight improvements not only in physical properties (homogeneity, well-defined margins, light sweet taste, good optical properties, high solubility capacity or, as in the case of some samples, complete solubilization), but also superior mechanical properties (samples with high inulin content into composition had high tensile strength and extremely high elongation values). Even after three months of developing, the values of mechanical properties indicate a strong material. The optimization establishes the composition necessary to obtain a strong and completely water-soluble material. This type of packaging represents a successful alternative for the future of food packaging: they are completely edible, biodegradable, compostable, obtained from renewable resources, and produce zero waste, at low cost.

Influence of functional ingredients on starch gelatinization in sponge cake batter

The present study evaluated the thermal properties of sponge cake batters with different functional ingredients, and the effects of their adding on starch gelatinization. Samples of sponge cake batter: with wheat flour (control batter), with a reduced quantity of wheat flour and addition of functional ingredients (sponge cake batter with 50% einkorn wholemeal flour, sponge cake batter with 20% Jerusalem artichoke powder, sponge cake batter with 35% cocoa husk powder) were investigated. Using the method of differential scanning calorimetry (DSC) the starch gelatinization temperature intervals (°C) and energies of the different batters during baking were evaluated. Based on the experimental results, it could be concluded that the addition of functional ingredients in the cake batter retard the starch gelatinization. The gelatinization occurs at higher temperature and with higher energy consumption. The retarding effect of the functional ingredients is related to the water binding capacity and the presence of dietary fiber.