In vivo analysis of two new fungicides in mung bean sprouts by solid phase microextraction-gas chromatography-mass spectrometry

Recent advance on microextraction sampling technologies for bioanalysis

The contents of target substances in biological samples are usually at low concentration levels, and the matrix of biological samples is usually complex. Sample preparation is considered a very critical step in bioanalysis. At present, the utilization of microextraction sampling technology has gained considerable prevalence in the realm of biological analysis. The key developments in this field focus on the efficient microextraction media and the miniaturization and automation of adaptable sample preparation methods currently. In this review, the recent progress on the microextraction sampling technologies for bioanalysis has been introduced from point of view of the preparation of microextraction media and the microextraction sampling strategies. The advance on the microextraction media was reviewed in detail, mainly including the aptamer-functionalized materials, molecularly imprinted polymers, carbon-based materials, metal-organic frameworks, covalent organic frameworks, etc. The advance on the microextraction sampling technologies was summarized mainly based on in-vivo sampling, in-vitro sampling and microdialysis technologies. Moreover, the current challenges and perspective on the future trends of microextraction sampling technologies for bioanalysis were briefly discussed.

Determination of diflufenican and azaconazole pesticides in wastewater samples by GC-MS after preconcentration with stearic acid functionalized magnetic nanoparticles-based dispersive solid-phase extraction

This study presents the preconcentration of diflufenican and azaconazole from domestic wastewater samples by using dispersive solid-phase extraction (dSPE) for determination by gas chromatography-mass spectrometry (GC-MS). Stearic acid-coated magnetic nanoparticles were used as adsorbents for dSPE method. In order to maximize the efficiency of the extraction process, parameters such as magnetic nanoparticle (MNP) type and amount, eluent type and volume, mixing type, and mixing period were all optimized. The linear range obtained for azaconazole and diflufenican was 7.50-500 ng/mL and 7.50-750 ng/mL, and their limits of detection/quantification (LOD/LOQ) were calculated as 1.3/4.3 ng/mL and 1.4/4.7 ng/mL, respectively. By comparing the LOD values of direct GC-MS and the developed dSPE method, azaconazole and diflufenican recorded approximately 35 and 38 folds enhancement in detection power. Recovery experiments with domestic wastewater were carried out to certify the proposed method's accuracy and applicability. By using the matrix matching calibration strategy, the good percent recovery results between 98 and 105% were obtained.

Effects of Typical Antimicrobials on Growth Performance, Morphology and Antimicrobial Residues of Mung Bean Sprouts

Antimicrobials may be used to inhibit the growth of micro-organisms in the cultivation of mung bean sprouts, but the effects on mung bean sprouts are unclear. In the present study, the growth performance, morphology, antimicrobial effect and antimicrobial residues of mung bean sprouts cultivated in typical antimicrobial solutions were investigated. A screening of antimicrobial residues in thick-bud and rootless mung bean sprouts from local markets showed that the positive ratios of chloramphenicol, enrofloxacin, and furazolidone were 2.78%, 22.22%, and 13.89%, respectively. The cultivating experiment indicated that the production of mung bean sprouts in antimicrobial groups was significantly reduced over 96 h (p < 0.05). The bud and root length of mung bean sprouts in enrofloxacin, olaquindox, doxycycline and furazolidone groups were significantly shortened (p < 0.05), which cultivated thick-bud and rootless mung bean sprouts similar to the 6-benzyl-adenine group. Furthermore, linear regression analysis showed average optical density of 450 nm in circulating water and average production had no obvious correlation in mung bean sprouts (p > 0.05). Antimicrobial residues were found in both mung bean sprouts and circulating water. These novel findings reveal that the antimicrobials could cultivate thick-bud and rootless mung bean sprouts due to their toxicity. This study also proposed a new question regarding the abuse of antimicrobials in fast-growing vegetables, which could be a potential food safety issue.

Point Mutations in FgSdhC2 or in the 5' Untranslated Region of FgSdhC1 Confer Resistance to a Novel Succinate Dehydrogenase Inhibitor Flubeneteram in Fusarium graminearum

Fusarium graminearum is one of the phytopathogenic fungi causing cereal fusarium head blight worldwide. Flubeneteram (Flu) is a novel succinate dehydrogenase inhibitor (SDHI) which exhibits strong fungicidal activity against F. graminearum. In this study, four Flu-resistant (Flu^R) mutants were generated by fungicide domestication from the wildtype strain PH-1. Sequencing alignment results of FgSdh from PH-1 and Flu^R mutants showed that all the mutations could be categorized into three resistant genotypes. Genotype I had an A-to-T mutation at the -57 bp of the 5' untranslated region (5'UTR) of FgSdhC₁, while genotypes II and III carried nonsynonymous mutations conferring T77I or R86C in FgSdhC₂, respectively. All the mutations conferring the Flu resistance and causing fitness penalty were validated. The genotype I mutant showed high Flu-resistance, while genotype II and III mutants exhibited low Flu resistance. Additionally, all the Flu^R genotypes showed distinct cross-resistance patterns among the five SDHIs.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Green solid-phase microextraction fiber coating based on the metal-organic framework CIM-80(Al): Analytical performance evaluation in direct immersion and headspace using gas chromatography and mass spectrometry for the analysis of water, urine and brewed coffee

A new solid-phase microextraction (SPME) fiber coating was prepared by the immobilization of the metal-organic framework (MOF) CIM-80(Al) on nitinol wires by a green in situ growth approach, using an aqueous synthetic approach, and without the need of any additional material to ensure the attachment of the MOF to the nitinol support. The coating was used for the development of headspace (HS) and direct immersion (DI) SPME methods in combination with gas chromatography and mass spectrometry (GC-MS) for the determination of polycyclic aromatic hydrocarbons (PAHs) as model compounds. Both methods were optimized and validated using the MOF-based fiber together with the commercial polydimethylsiloxane (PDMS) fiber. The MOF extraction phase exhibited superior analytical performance for most of the PAHs in HS-SPME mode (and particularly for less volatiles), while the PDMS fiber presented better results in the DI-SPME method. The analytical performance of the MOF sorbent coating in HS- and DI-SPME methods was also evaluated in urine and brewed coffee samples, without requiring any pretreatment step apart from dilution for DI-SPME experiments, thus showing suitability of the novel coatings for the analysis of complex samples. The proposed CIM-80(Al) fiber was efficient and biocompatible (for using a low cytotoxic sorbent and a biocompatible core support), and it also demonstrated stability and robustness, with inter-fiber (and inter-day) relative standard deviation values lower than 19%, and reusability for more than 80 extraction cycles using 280 °C as desorption temperature.

Biocompatible chitosan-zinc oxide nanocomposite based dispersive micro-solid phase extraction coupled with HPLC-UV for the determination of rosmarinic acid in the extracts of medical plants and water sample

In the present research, a procedure was described for the recovery of rosmarinic acid (RA) from medical extract samples using chitosan‑zinc oxide nanoparticles as a biocompatible nanocomposite (CS-ZnO-NC). The dispersive micro-solid phase extraction (D-μ-SPE) of RA from the medical extract samples was investigated by using the prepared biocompatible composite as a solid phase. The HPLC-UV method was used for measuring the extracted RA. The important variables (pH, biocompatible composite mass, contact time, and volume of eluent) associated with the extraction process were analyzed by the application of central composite design (CCD). The achieved optimum values for the mentioned variables were 7.0, 10 mg, 4 min, and 180 μL, respectively. The extraction recovery (99.68%) obtained from the predicted model was in agreement with the experimental data (98.22 ± 1.33%). In addition, under the obtained optimum conditions and over the concentration in the range of 2-3500 ng mL-1, a linear calibration curve was obtained with R2 > 0.993. The limit of detection (LOD) and quantification (LOQ) values were computed, and the obtained ranges were respectively from 0.060 to 0.089 ng mL-1 and 0.201 to 0.297 ng mL-1. In addition, the enrichment factors were obtained in the range of 93.7-110.5 with preconcentration factor of 83.3. Therefore, the D-μ-SPE-HPLC-UV method could be used for analyzing RA in the samples of the extracts obtained from the medical plants and water with the recovery values of the analyte in the range of 96.6%-105.4% and the precision with relative standard deviation <5.7%.

Amino-modified Scholl-coupling mesoporous polymer for online solid-phase extraction of plant growth regulators from bean sprouts

A new amino-modified Scholl-coupling mesoporous polymer (NH₂@SMPA)-online solid-phase extraction method, coupled with high-performance liquid chromatography (online SPE-HPLC) was established for the analysis of six plant growth regulators (PGRs) in bean sprouts. NH₂@SMPA was synthesized by acid-catalyzed deacetylation of acetylamino-Scholl-coupling mesoporous polymer (SMPA). The diversity of functional groups, such as aromatic, acetylamino, and NH₂, was conducive to multiple binding interactions between NH₂@SMPA and PGRs. NH₂@SMPA exhibited superior extraction capability for PGRs, compared with SMPA and commercial adsorbents. The extraction conditions, including loading solvent, pH of loading solution, eluting solvent, and flow rates of loading and elution, were optimized. Under the optimized conditions, wide linear ranges (0.01-500 μg kg^-1) and low detection limits (2.34-20.2 ng kg^-1) were obtained. The recoveries were satisfactory, i.e., 86.0% to 109% with relative standard deviations ≤9.8% (n = 3). Finally, the online SPE-HPLC method was successfully used for determination of PGRs in bean sprouts.

Recent Advances in In Vivo SPME Sampling

In vivo solid-phase microextraction (SPME) has been recently proposed for the extraction, clean-up and preconcentration of analytes of biological and clinical concern. Bioanalysis can be performed by sampling exo- or endogenous compounds directly in living organisms with minimum invasiveness. In this context, innovative and miniaturized devices characterized by both commercial and lab-made coatings for in vivo SPME tissue sampling have been proposed, thus assessing the feasibility of this technique for biomarker discovery, metabolomics studies or for evaluating the environmental conditions to which organisms can be exposed. Finally, the possibility of directly interfacing SPME to mass spectrometers represents a valuable tool for the rapid quali- and quantitative analysis of complex matrices. This review article provides a survey of in vivo SPME applications focusing on the extraction of tissues, cells and simple organisms. This survey will attempt to cover the state-of- the-art from 2014 up to 2019.

In Situ Real-Time Tracing of Organophosphorus Pesticides in Apples by Solid-Phase Microextraction with Developed Sampling-Rate Calibration

An in situ tracing study based on solid-phase microextraction (SPME) was conducted to investigate the uptake and elimination of organophosphorus pesticides in apples. A matrix-compatible polydimethylsiloxane/poly(styrene-co-divinylbenzene)/polydimethylsiloxane fiber was produced to meet the needs of in situ sampling. The fiber had high extraction ability, good sensitivity and accuracy with respect to the analytes in apple pulp, and could be used 85 times. Although the sampling rate was changing over time, quantification was still achieved by the sampling rate calibration method. Some factors that affect its applicability were studied. The limits of detection were 0.18 ng/g for diazinon and 0.20 ng/g for chlorpyrifos, rather lower than the maximum residue limits of the National Food Safety Standard of China (GB 2763-2016) and the European Commission (Reg.(EU) No 834/2013, 2018/686). The accuracy of in situ SPME quantification was verified by comparing with the results obtained by the traditional liquid-liquid extraction method. In this work, the in situ sampling method is developed using apples, diazinon, and chlorpyrifos as a model system; however, this method can be used for in vivo analysis of fruits and vegetables for nutrition and safety monitoring.