A facile water-induced complexation of lycopene and pectin from pink guava byproduct: Extraction, characterization and kinetic studies

Exogenous microbubbles contribute to valorization of microalgal compounds by ultrasound-assisted extraction

Ultrasound-assisted extraction (UAE) shows great potential in exploiting microalgal compounds. However, upgrading the extraction system lacks concerns. This study proposes a novel sono-reactor featuring a microbubble distributor for increasing bubble abundance and correspondingly improving microalgal compound extraction. Results indicate that protein concentrations increase with ultrasound powers and extraction time while an optimized gas flow rate exists. The optimal parameters by Box-Behnken design are power 646.0 W, nitrogen flow rate 25.0 mL/min, and time 40.0 min, with an optimal protein concentration of 249.1 mg/L - a substantial improvement over gas-free extraction. The strategic increase in bubble abundance enhances microalgal compound extraction efficiency and extraction kinetics. The system innovation will contribute to the advancement of bioresource utilization and sustainability.

Designing Nutrition for Health-Incorporating Dietary By-Products into Poultry Feeds to Create Functional Foods with Insights into Health Benefits, Risks, Bioactive Compounds, Food Component Functionality and Safety Regulations

This review delves into the concept of nutrition by design, exploring the relationship between poultry production, the utilization of dietary by-products to create functional foods, and their impact on human health. Functional foods are defined as products that extend beyond their basic nutritional value, offering potential benefits in disease prevention and management. Various methods, including extraction, fermentation, enrichment, biotechnology, and nanotechnology, are employed to obtain bioactive compounds for these functional foods. This review also examines the innovative approach of enhancing livestock diets to create functional foods through animal-based methods. Bioactive compounds found in these functional foods, such as essential fatty acids, antioxidants, carotenoids, minerals, vitamins, and bioactive peptides, are highlighted for their potential in promoting well-being and mitigating chronic diseases. Additionally, the review explores the functionality of food components within these products, emphasizing the critical roles of bioaccessibility, bioactivity, and bioavailability in promoting health. The importance of considering key aspects in the design of enhanced poultry diets for functional food production is thoroughly reviewed. The safety of these foods through the establishment of regulations and guidelines was reviewed. It is concluded that the integration of nutrition by design principles empowers individuals to make informed choices that can prioritize their health and well-being. By incorporating functional foods rich in bioactive compounds, consumers can proactively take steps to prevent and manage health issues, ultimately contributing to a healthier society and lifestyle.

Ultrasound-induced cell disintegration and its ultrastructure characterization for the valorisation of Chlorella pyrenoidosa protein

Chlorella pyrenoidosa (CP) has great potential for feeding future demands in food, environment, energy, and pharmaceuticals. To achieve this goal, the exploitation of emerging efficient technique such as ultrasound-assisted extraction (UAE) for CP nutrient enrichment is crucial. Here, UAE is deployed for high-efficient CP protein (CPP) valorisation. Compared to conventional solvent extraction (CSE), remarkable mass transfer enhancements with 9-time protein yields and 3-time extraction rate are achieved by ultrasonic cavitation in UAE, indicating UAE can drastically shift intracellular nutrients including proteins and pigments to solvent. Cell morphology and ultrastructure show the different responses of cell wall and membrane, indicating that the cell membrane may play a role in the extraction process, based on which the extremely-low efficiency of CSE and high efficiency of UAE are highlighted. This study provides a solution for future food crisis by extracting CPP and may open a new discussion field in ultrasonic extraction.

"Novel chitosan/alginate hydrogels as carriers of phenolic-enriched extracts from saffron floral by-products using natural deep eutectic solvents as green extraction media"

The current saffron production system is generating several hundreds of tons of tepal waste, because only stigmas are used for food. Consequently, the valorization of saffron floral by-products by developing stable functional ingredients could lead to the environmental impact minimization. Thus, the main aim of this study was to develop innovative green extraction processes from saffron floral by-products by using Natural Deep Eutectic Solvents (NaDES) and ultrasound-assisted extraction (UAE) as ecological extraction method. Response surface methodology was used to optimize process parameters. To improve the stability of the optimal extracts, they were incorporated into chitosan/alginate hydrogels, studying their water-uptake and water retention capacity and the total phenolic content (TPC) during the in vitro digestion. The results indicated that the optimal extraction, regarding total phenolic and flavonoid content, was achieved in 20 min, using 180 W ultrasound power and 90% of NaDES. The results of the DPPH assay revealed the potent antioxidant activity of saffron floral by-products. The chitosan/alginate hydrogels incorporating the as-obtained NaDES extracts showed favorable properties whereas the TPC remained stable under intestinal conditions. Therefore, NaDES combined with UAE was an efficient technique to isolate high added-value compounds from saffron flowers, succeeding also the valorization of discarded waste by using green and low-cost strategies. Furthermore, these novel hydrogels could be used as promising candidates for food or cosmetic applications.

Evaluation of pectin extractions and their application in the alkaline Maillard reaction

A 2³ factorial design was used to evaluate the influence of temperature, catalyst and time and esterification degree (DE) of pectin obtained from mango, orange and tangerine peels as well as tamarind seeds by using the acid hydrolysis method. The study showed that a high temperature positively influenced the percentage of pectin yield for the four second generation biomasses. Nevertheless, the temperature showed a greater influence in the solubility and diffusion of the acid solvent in the tamarind seed matrix, resulting a pectin recovery 32.9%. Concerning the %DE, the most statistically significant value observed was dependent on the type of biomass studied. The %DE and the nature of the pectin are determining factors in the pectin's final use, in the present work the pectin extracted was used to produce furfural, a precursor of high value chemicals. The furfural production was achieved through alkaline hydrolysis and enhanced using the Maillard reaction, reaching a maximum concentration of 71.8 g/L which represents a 42.1% increase from the alkaline hydrolysis.

Structural and mechanical properties of biodegradable poly(lactic acid) and pectin composites: using bionucleating agent to improve crystallization behavior

Biocomposites of poly(lactic acid) (PLA) and pectin, which are low-cost organic materials, were prepared using an internal mixing machine in various pectin contents, i.e., 2, 4, 6 and 8% w/w. When pectin was added as a nucleating agent, the mechanical properties of the biocomposites, such as tensile and impact testing, were considerably improved, particularly following the annealing process. In addition, the PLA–pectin annealed at 4% w/w showed the highest strength and thermal stability. This can be explained by the fact that PLA containing 4% pectin by weight had the best dispersion, as indicated by scanning electron microscopy (SEM) and synchrotron-based 2D chemical mapping FT-IR. Moreover, pectin not only serves as a reinforcing material to improve mechanical characteristics but also aids in the crystallization of PLA, which was confirmed by in situ synchrotron-based wide-angle X-ray scattering (SR-WAXS). The crystallization rate and crystallinity were maximum at 8% w/w pectin addition according to the SR-WAXS results. This shows that pectin dispersion is the most important factor in determining the mechanical and thermal properties of biocomposites.

An Edible Oil Enriched with Lycopene from Pink Guava (Psidium guajava L.) Using Different Mechanical Treatments

According to the regulations of the United States Food and Drug Administration (FDA), organic solvents should be limited in pharmaceutical and food products due to their inherent toxicity. For this reason, this short paper proposes different mechanical treatments to extract lycopene without organic solvents to produce an edible sunflower oil (SFO) enriched with lycopene from fresh pink guavas (Psidium guajava L.) (FPGs). The methodology involves the use of SFO and a combination of mechanical treatments: a waring blender (WB), WB+ high-shear mixing (HSM) and WB+ ultrafine friction grinding (UFFG). The solid:solvent (FPG:SFO) ratios used in all the techniques were 1:5, 1:10 and 1:20. The results from optical microscopy and UV–vis spectroscopy showed a correlation between the concentration of lycopene in SFO, vegetable tissue diameters and FPG:SFO ratio. The highest lycopene concentration, 18.215 ± 1.834 mg/g FPG, was achieved in WB + UFFG with an FPG:SFO ratio of 1:20. The yield of this treatment was 66% in comparison to the conventional extraction method. The maximal lycopene concentration achieved in this work was significantly higher than the values reported by other authors, using high-pressure homogenization for tomato peel and several solvents such as water, SFO, ethyl lactate and acetone.

Effect of Fenugreek fiber on Rheological and chapati making quality of whole wheat flour

Increase in awareness of consumers and demand has led to the development of various fibre rich food products from different fiber source. In the present work novel roller milled fenugreek fiber rich fraction (FFRF) rich in galactomannans was used for the development of high fiber chapati. Farinograph water absorption and dough stability increased with increase in the addition of FFRF in blends. The creep measurement results showed reduction in the maximum creep compliance and viscoelastic compliance while the zero shear viscosity showed the increasing trend with the increase in the addition of FFRF. The pliability of chapatis significantly decreased on addition of FFRF. The sensory evaluation concluded that the chapati with 10% FFRF is acceptable. The shear force value of chapatis prepared from the control and WWF-FFRF blends were decreased as the storage time increased showing brittleness in the chapatis. The micrographs of an outer layer of chapati (crust) showed partially gelatinized starch. The crumb micrographs of the WWF-FFRF blends chapatis showed large and small starch granules coated with galactomannans gums, and this coating increased with increased addition of FFRF. The composition of 10% fenugreek fiber chapati contained higher amount of minerals, insoluble and soluble dietary fiber compared to that of control sample. The in vitro starch digestibility of formulated chapati showed significant decrease in the values.

Sustainable Applications for the Valorization of Cereal Processing By-Products

This review article revises the sustainable practices and applications to valorize valuable components recovered from cereal processing by-products. After introducing cereal processing by-products, their healthy compounds, and corresponding functional properties, the article explores reutilization opportunities of by-products emphasizing specific sources (e.g., oat and wheat bran, distillers' dried grains, etc.) and the biorefinery approach. Proteins and soluble dietary fibers such as arabinoxylans are of particular interest due to their content in the cereal processing by-products and their easy extraction based on conventional technologies such as enzyme-assisted extraction and membrane filtration. Non-thermal technologies have also been suggested to improve sustainability recovery approaches. Finally, the article discusses the different applications for the recovered high-added value compounds that span across biotechnology, foods, and bakery products.

A comprehensive review on current and emerging technologies toward the valorization of bio-based wastes and by products from foods

Industries in the agro-food sector are the largest generators of waste in the world. Agro-food wastes and by products originate from the natural process of senescence, pretreatment, handling, and manufacturing processes of food and beverage products. Notably, most of the wastes are produced with the transformation of raw materials (such as fruits, vegetables, plants, tubers, cereals, and dairy products) into different processed foods (e.g., jams, sauces, and canned fruits/vegetables), dairy derivatives (e.g., cheese and yogurt), and alcoholic (e.g., wine and beer) and nonalcoholic beverages (e.g., juices and soft drinks). Current research is committed not only to the usage of agro-food wastes and by products as a potential source of high-value bioactive compounds (e.g., phenolic compounds, anthocyanins, and organic acids) but also to the implementation of emerging and innovative technologies that can compete with conventional extraction methods for the efficient extraction of such biomolecules from the residues. Herein, specific valorization technologies, such as membrane-based processes, microwave, ultrasound, pulsed electric-assisted extraction, supercritical/subcritical fluids, and pressurized liquids, have emerged as advanced techniques in extracting various added-value biomolecules, showing multiple advantages (improved extraction yields, reduced process time, and protection to the bioactive properties of the compounds). Hence, this comprehensive review aims to analyze the ongoing research on applying such techniques in valorization protocols. A last-five-year review, together with a featured analysis of the relevant findings in the field, is provided.

Rheological Properties of Industrial Hot Trub

The boiling of beer wort with hops results in the formation of a hot trub, a sediment consisting mainly of water-insoluble tannin and protein conglomerates and hop residue. Hot trub is a waste product, removed in a clarifying tank and discarded. The use of barley malt substitutes in recipes for beer is associated with an increase in the amount of generated hot trub. In presented study, an analysis of the rheological properties of industrial hot trub was carried out. Samples varied with regard to the quantities of unmalted barley (0%, 35%, and 45%) and worts’ extract (12.5, 14.1, 16.1, and 18.2 °Plato) in the recipe. The rheology of each type of sludge was determined using a hysteresis loop at four different temperatures. The results showed the shear-thinning and thixotropic properties of the hot trub. It was found that, regardless of the raw material and extract used, all samples exhibited the same rheological properties, but with different values. It was also proved that both raw material composition and temperature affected the hot trub’s rheology. The highest values of viscosity were identified for malted barley, whereas the lowest apparent viscosity values were recorded for the hot trub with a 30% addition of unmalted barley. The Herschel–Bulkley model had the best fit to the experimental data.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.

Vacuum-Assisted Osmotic Dehydration of Autumn Olive Berries: Modeling of Mass Transfer Kinetics and Quality Assessment

Autumn olive fruits were osmo-dehydrated in sucrose solution at 70 °C under vacuum and atmospheric pressure. The mass transfer kinetics data were applied to the models of Azuara, Crank, Page, and Peleg. The Peleg model was the best-fitted model to predict the water loss and solid gain of both treatments. The vacuum application decreased the effective diffusivities from 2.19 × 10^-10 to 1.55 × 10^-10 m²·s^-1 for water loss and from 0.72 × 10^-10 to 0.62 × 10^-10 m²·s^-1 for sugar gain. During the osmotic dehydration processes, the water activity decreased and stabilized after 5 h, while the bulk densities increased from 1.04 × 10³ to 1.26 × 10³ kg/m³. Titratable acidity gradually reduced from 1.14 to 0.31% in the atmospheric pressure system and from 1.14 to 0.51% in the vacuum system. pH increased significantly in both systems. Good retention of lycopene was observed even after 10 h of treatments. For the color parameters, the lightness decreased and stabilized after 30 min. In comparison, the redness and yellowness increased in the first 30 min and gradually decreased towards the initial levels in the fresh fruit.

Addition of olive (olea europaea) leaf extract as a source of natural antioxidant in mutton meatball stored at refrigeration temperature

This study was aimed to evaluate the effects of using different levels of olive (Olea europaea) leaf extract on fresh and preserved mutton meatballs. Meatballs were divided into four different groups and treated as T0 (0), T1 (0.1), T2 (0.2) and T3 (0.3%), respectively based on olive leaf extract supplementation. Days of intervals of experiment were 0, 5, 10 days. Samples were preserved at 4˚C for up to 10 days. Different types of analysis such as, sensory (color, flavor, juiciness and overall acceptability), proximate composition (CP %), physicochemical (pH), biochemical (POV, FFA and TBARS) and microbiological (TVC, TCC and TYMC) were determined. Color, flavor and acceptability reduced significantly (p < 0.05) with the increase of the storage periods. Values of the studied quality parameters in all the treatment groups differed significantly (p < 0.05). Based on our findings 0.3% olive leaf extract is found suitable to add in mutton meatballs as a source of natural antioxidant.

Guava (Psidium guajava L.): a glorious plant with cancer preventive and therapeutic potential

Guava (Psidium guajava L.) tree (Myrtaceae family) bears fruit rich in vitamins, fiber, and other nutrients. While native to Latin America, guava is grown in many tropical and subtropical regions across the globe where it has long been used in traditional medicine to treat a myriad of ailments. Guava has been shown to exhibit a number of biological and pharmacological activities, such as antioxidant, anti-inflammatory, immunomodulatory, antimicrobial, antidiabetic, and anticancer properties. Several parts of the plant, including the leaves, fruits, seeds, peels, pulp, bark, and oil, produce phytochemicals with medicinal properties. Emerging research has found that guava bioactive phytochemicals exert antitumorigenic effects against various human malignancies through multiple mechanisms. While there are numerous individual studies that document the anticancer effects of guava constituents, an up-to-date, comprehensive, and critical review of available research data has not been performed. Therefore, the purpose of this review is to present a complete analysis of the cancer preventive and anticancer therapeutic potential of guava-derived products and guava constituents, with a focus on the cellular and molecular mechanisms of action. The bioavailability, pharmacokinetics, and toxicity of guava as well as limitations, challenges, and future directions of research have also been discussed.

Evaluation and prediction of the biogenic amines in Chinese traditional broad bean paste

Biogenic amines (BAs) are a threat to the safety of broad bean paste, and biosynthetic mechanism of BA and its regulation are unknown. This study aimed to assess microbial BA synthesis in Chinese traditional broad bean paste and determine favorable fermentation conditions for BA regulation. The BAs content in 27 pastes was within the safe range. 64 strains with potential decarboxylation were screened in Luria-Bertani Glycerol medium and identified as Bacillus spp. Although Bacillus amyloliquefaciens produced highest levels of BAs (70.14 ± 2.69 mg/L) in LBAA, Bacillus subtilis produced 6% more BAs than B. amyloliquefaciens. Meanwhile, temperature was the most remarkable factor affecting BAs production by B. amyloliquefaciens 1-13. Furthermore, the fermented broad bean paste model revealed that BA content increased by 61.2 mg/kg every 10 days at 45 °C, which was approximately threefold of that at 25 °C. An ARIMA prediction model of BAs content was constructed, and the total BAs content of 40 mg/100 g was set as the critical value. This study not only contributed to understanding the BAs formation mechanism, but also provided potential measures to control the BAs in fermented soybean products.

Optimization and Encapsulation of Phenolic Compounds Extracted from Maize Waste by Freeze-Drying, Spray-Drying, and Microwave-Drying Using Maltodextrin

Cornsilk is maize waste containing phenolic compounds. In this study, freeze-drying, spray-drying, and microwave-drying techniques were evaluated for the encapsulation of cornsilk's phenolic compounds using maltodextrin as wall material. The results of antioxidant properties showed that freeze-drying was more efficient than microwave-drying and spray-drying techniques. The highest recovery of phenolic compounds was obtained with freeze-drying. The microstructure, DSC, and FTIR data showed that the encapsulation process was effective, and freeze-drying was the best drying technique. The physical properties of the microparticles greatly changed with the drying techniques. This study revealed that the phenolic compounds of the cornsilk extract can be successfully encapsulated and valorized.

Valorisation of carrot peel waste by water-induced hydrocolloidal complexation for extraction of carotene and pectin

Food processing waste is a potential resource of a variety of bioactive compounds. Carrot peel is a good example of phytonutrient-rich agroindustrial byproducts generated from the processing of carrots. The conventional methods for the extraction of phytonutrients typically involve large volume of organic solvents, complex procedures and expensive equipment. Hence, the development of green and simpler extraction method is advantageous to the valorisation of agroindustrial waste in terms of economic and sustainability. In this study, the applicability of carotene-pectin hydrocolloidal complexation to the co-extraction of carotenoids and pectin from carrot peel waste was evaluated. Carrot peel waste is a potential feedstock for this extraction method because it is rich in carotenoids and pectin, which could form the colloidal complex induced by water. The operating conditions of complexation process were optimized using response surface methodology. The maximum yield and purity of β-carotenes extracted from carrot peel are 1.17 mg/100 g wet sample and 96%, respectively. In comparison to the conventional solvent extraction method, the number of operating steps in carotene-pectin hydrocolloidal complexation is significantly lower and the antioxidant activity of β-carotenes was higher. The carotene-pectin hydrocolloidal complexation method is therefore a green extraction method that enables the valorisation of agricultural waste to recover carotenoids.

Screening of physicochemical and functional attributes of fermented beverage (wine) produced from local mango (Mangifera indica) varieties of Uttar Pradesh using novel saccharomyces strain

Mango (Mangifera Indica L.) is a major tropical fruit rich in sugar, organic acids and flavonoids, making it suitable fruit for wine making. In the present study, five varieties of mango (Baganpalli, Langra, Dashehari, Alphonso, and Totapuri) were utilized for wine production using two different yeast strains namely, Saccharomyces cerevisiae MTCC 178 and isolated yeast. The physiochemical analysis of wine produced from chosen mango varieties showed that North Indian local mango variety (Dashehari) gave better results in terms of organoleptic and functional attributes. The Saccharomyces cerevisiae MTCC 178 treated Dashehari wine possessed 6.1 ± 0.26% TSS, 2.1 ± 0.08% reducing sugar, 0.657% titratable acidity, 0.11 ± 0.00% volatile acidity, 12% ethanol (v/v) and pH 3.7 ± 0.10 comparable to Baganpalli mango wine. HPLC analysis of Saccharomyces cerevisiae MTCC 178 inoculated Dashehari mango wine revealed the presence of primarily; gallic acid (RT-4.4 min), Galloyl-A-type, procyanidin (RT-5.2 min), 2,2,6-Trimethyl-6-vinyltetrahydropyran (RT-8.91 min), β-Pinene (RT-11.47 min) and Caffeoyl-quinic acid (RT-12.15 min) showing potential antioxidant, anti-cancerous, anti-inflammatory and antimicrobial properties. The local mango varieties wine showed significant (p < 0.05) physicochemical properties, antioxidant potential and ethanol content comparable to Baganpalli wine and was cost effective.

Optimization of Osmotic Dehydration of Autumn Olive Berries Using Response Surface Methodology

Autumn olive fruits are a rich source of nutrients and functional compounds, making them functional foods against many diseases and cancers. To increase the consumption, its processing, and its transformation into new products would help spread them to the consumer’s table. In this study, after giving an overview of the physicochemical characteristics and the antioxidant activity, the objective was to optimize the osmotic dehydration (OD) of the berries. Response surface methodology was used to investigate the effect of dehydration factors: syrup concentration (30–70%), temperature (20–70 °C), and fruit-to-syrup ratio (1:10–2:10) on the water loss (WL), sugar gain (SG), weight reduction (WR), density (ρ), water activity (a_w), and total color change (ΔE) of fruits after 10 h of OD. Results obtained by employing Box–Behnken design (three variables, three levels), and significant terms of regression equations indicated that the syrup concentration and temperature variation are the most affecting factors on the previously mentioned independent variables (WL SG, WR, ρ, a_w, and ΔE). Fruits to syrup ratio appeared to have a significant effect only on WL. Under the optimum conditions found (70%, 70 °C, 1.8:10), the predicted values were 59.21%. 19.21%, 32.34%, 1.22 g/cm³, 0.850, and 3.65 for WL, SG, WR, ρ, a_w, and ΔE, respectively.

Innovations and technology disruptions in the food sector within the COVID-19 pandemic and post-lockdown era

Background

COVID-19 pandemic has caused a global lockdown that has abruptly shut down core businesses and caused a worldwide recession. The forecast for a smooth transition for the agri-food and drink industry is, at best, alarming. Given that COVID-19 shutdown multiple core services (such as aviation, food services, supply chains, and export and import markets), there is an enormous deficiency in critical information to inform priority decision making for companies where this uncertainly is likely to impact negatively upon recovery.

Scope and approach

The current article investigates potential innovations within the era of the COVID-19 crisis after framing them within the four issues of the food sector (food safety, bioactive food compounds, food security, and sustainability) that are directly affected by the pandemic. The prospect of foreseen innovations to disrupt the food sector during lockdown periods and the post-COVID-19 era is also discussed.

Key findings and conclusions

Internet and Communication Technologies, blockchain in the food supply chain and other Industry 4.0 applications, as well as approaches that redefine the way we consume food (e.g., lab-grown meat, plant-based alternatives of meat, and valorization of a vast range of bioresources), are the innovations with the highest potential in the new era. There is also an equally pressing need to exploit social marketing to understand attitudes, perceptions, and barriers that influence the behavior change of consumers and the agri-food industry. Subsequently, this change will contribute to adapting to new norms forged by the COVID-19 pandemic, where there is a significant gap in knowledge for decision making.

Polysaccharides obtained from natural edible sources and their role in modulating the immune system: Biologically active potential that can be exploited against COVID-19

BACKGROUND

The global crisis caused by the outbreak of severe acute respiratory syndrome caused by the SARS-CoV-2 virus, better known as COVID-19, brought the need to improve the population's immunity. The foods rich in polysaccharides with immunomodulation properties are among the most highly rated to be used as immune response modulators. Thus, the use of polysaccharides obtained from food offers an innovative strategy to prevent serious side effects of viral infections.

SCOPE AND APPROACH

This review revisits the current studies on the pathophysiology of SARS-CoV-2, its characteristics, target cell interactions, and the possibility of using polysaccharides from functional foods as activators of the immune response. Several natural foods are explored for the possibility of being used to obtain polysaccharides with immunomodulatory potential. And finally, we address expectations for the use of polysaccharides in the development of potential therapies and vaccines.

KEY FINDINGS AND CONCLUSIONS

The negative consequences of the SARS-CoV-2 pandemic across the world are unprecedented, thousands of lives lost, increasing inequalities, and incalculable economic losses. On the other hand, great scientific advances have been made regarding the understanding of the disease and forms of treatment. Polysaccharides, due to their characteristics, have the potential to be used as potential drugs with the ability to modulate the immune response. In addition, they can be used safely, as they have no toxic effects, are biocompatible and biodegradable. Finally, these biopolymers can still be used in the development of new therapies and vaccines.

Functionality of Food Components and Emerging Technologies

This review article introduces nutrition and functional food ingredients, explaining the widely cited terms of bioactivity, bioaccessibility, and bioavailability. The factors affecting these critical properties of food components are analyzed together with their interaction and preservation during processing. Ultimately, the effect of emerging (non-thermal) technologies on different food components (proteins, carbohydrates, lipids, minerals, vitamins, polyphenols, glucosinolates, polyphenols, aroma compounds, and enzymes) is discussed in spite of preserving their functional properties. Non-thermal technologies can maintain the bioavailability of food components, improve their functional and technological properties, and increase the recovery yields from agricultural products. However, the optimization of operational parameters is vital to avoid degradation of macromolecules and the oxidation of labile compounds.

Rambutan (Nephelium lappaceum) kernel olein as a non-hydrogenated fat component for developing model non-dairy liquid creamer: effect of emulsifier concentration, sterilization, and pH

In this work, the effects of the emulsifier concentration, sterilization process, and pH on the properties and stability of the model liquid creamer were evaluated. Applying diacetyl tartaric acid ester of mono- and diglycerides or DATEM at a concentration of 0.3% (w/w) in the presence of 2% (w/w) sodium caseinate produced stable model liquid creamers (10% (w/w) rambutan kernel olein) with a small particle size (Z-average ≈ 200 nm) and a narrow size distribution range (PDI < 0.24). These creamers were stable regarding creaming and coalescence, having non-flocculated particles and a constant flow behavior index (n) after sterilization using autoclaving (121 °C, 1.1 bar for 15 min) and during storage for 150 days at 25 °C. The model liquid creamers were unstable at pH values near the isoelectric point of caseinate (pH 4-5). However, these were stable after mixing with hot coffee solutions based on no observed feathering or sedimentation. The whitening performance of the model liquid creamers compared well with commercial ones. Non-hydrogenated fat-based model non-dairy liquid creamer was successfully formulated using rambutan kernel olein as a fat component. The results obtained in this study are useful for the possible application of fractionated rambutan kernel fat in food products.

Antioxidant and anti-obesity properties of local chilies varieties in Malaysia

Obesity is a serious health concern as it may initiate common chronic diseases. Chili pepper is an important spice that brings spiciness and commonly used in cuisines. However, the antioxidant and anti-obesity properties of chili varieties in Malaysia has not yet been fully investigated. Therefore, this study aimed to determine the antioxidant (content and activity) and anti-obesity properties of five different varieties of local chili peppers. The antioxidant activities of the extracts were determined through ferric-reducing antioxidant power (FRAP) and 2, 2'azinobis-(3-ethyl-benzothiazoline-6-sulphonic acid (ABTS) assays. Cell cytotoxicity of the selected chili extracts was determined in 3T3-L1 pre adipocytes using cell viability assay (MTT) assay. Whereas the ability to inhibit oil accumulation in fully differentiated 3T3-L1 adipocytes of the selected chili pepper extracts was assayed using Oil Red O staining. The results showed that Kulai 568 pulp extract had the highest level of total phenolic content (TPC) (47.88 ± 0.220 mg GAE/g), whereas Centil pulp extract had the highest level of total flavonoid content (TFC) (26.60 ± 0.52 mg QE/g). In term of antioxidant activities, Bara pulp extract had the highest value in FRAP (3.058 ± 0.002 mM Fe2+/mg extract) and ABTS (IC50 = 12.411 ± 0.025). High performance liquid chromatography (HPLC) analysis, Bara pulp extract has the highest level of capsaicin (72.271 ± 0.957 µg/ml). In terms of inhibition of oil accumulation Centil seed extract presented the best result (69.09-92.20%), while Bara pulp extract inhibited the most pancreatic lipase activity (IC50 = 4.84 ± 0.57 µg/ml). Thus, it is suggested that Centil seed and Bara pulp extracts can be a potent antioxidant and anti-obesity agents.

Scenarios for handling the impact of COVID-19 based on food supply network through regional food hubs under uncertainty

This paper discusses an optimization model for handling the impact of the COVID-19 pandemic based on food supply network through regional food hubs (RFHs) under uncertainty. To this end, uncertainty is assumed in the demand and production data. During the Pandemic COVID-19 period, uncertainty has increased and the food supply chain system has changed. Thus, a new configuration of the food supply network requires analysis. In this paper, the concept of RFH is introduced to connect producers in rural areas and customers in urban areas. This paper determines the location and capacity of RFHs, the food supply network, the sum of maximum food supplies, and minimum logistics cost. This is done via a Multi-Objective Many-to-Many Location-Routing Problem model. Furthermore, since the conditions of the COVID-19 pandemic is uncertain, robust optimization is employed to handle uncertainties. During the current pandemic, red zones are defined to indicate the severity of the pandemic in a region. In this paper, the numerical experiment is considered for three scenarios: when a region is in large-scale social distancing, partial social distancing, or normal conditions. This social distancing situation is based on the defined red zones. The optimal food supply network is obtained for the three scenarios and the best scenario among the three is identified.

Optimization of processing conditions for development of chicken meat incorporated whole wheat bread

Present study was conducted to explore the incorporation of high level of chicken meat powder for developing protein enriched whole wheat bread. The aim was to optimise meat level and processing conditions for development of chicken meat bread. Box-Beheken design of response surface methodology was used for optimising the processing conditions of chicken meat incorporated whole wheat bread as processing conditions strongly influence the product characteristics. Meat level (30-35%), proofing time (60-120 min) and cooking time (10-12 min) were contemplated as constrains or variable factors for their effect on responses such as baking yield, moisture, protein, fat, ash, redness and yellowness value, flavour, porosity and overall acceptability which are essential for product acceptability and marketability, while the cooking temperature was kept constant at 220 °C. The responses were assessed by evaluating the physicochemical, proximate, colour units and sensory evaluation. A high coefficient of regression > 0.90 was obtained for all the responses indicating the fit of model. The desirability achieved for these responses was 0.841 for 31.497% meat level with proofing time 107.17 min and baking time of 12.74 min. The study concluded with development of chicken meat bread having high protein content with optimised processing conditions of proofing and cooking time.

The evaluation of part-baked frozen bread produced from wheat flour and guar gum in the diet of celiac patients

The present study evaluated an enzyme strategy for eliminating the gliadin in the flour in order to produce part-baked (PB) frozen bread for celiac patients. At first, tissue transglutaminase with lysine methyl ester transamidated the gliadin and hydrolyses gliadin protein. The deamidated dough was used for producing the PB bread and then stored as the frozen storage at - 18 °C for 15 days, followed by investigating physicochemical, rheological, and sensory properties. The SDS-PAGE result demonstrated that transamidating wheat flour with a tissue transglutaminase and L-lysine methyl ester break down the gliadin protein. The PB frozen bread with the absence of gliadin had lower specific volume, porosity, firmness, and color index (P < 0.05) but adding 0.8% guar gum could improve these factors and recompense the absence of gliadin (P < 0.05). The PB frozen bread with 0.8% guar gum had physicochemical properties such as fresh bread which produced with untreated wheat flour (P < 0.05).

Recovery and Stabilization of Anthocyanins and Phenolic Antioxidants of Roselle (Hibiscus sabdariffa L.) with Hydrophilic Deep Eutectic Solvents

Deep eutectic solvents (DESs) have got huge interest as new green and sustainable solvents for the extraction of bioactive compounds from plants in recent decades. In the present study, we aimed to investigate the effectiveness of hydrophilic DES for the extraction of anthocyanin and polyphenol antioxidants from Roselle. A natural hydrophilic DES constituted of sodium acetate (hydrogen bond acceptor) and formic acid (hydrogen bond donor) designed to evaluate the total phenolic compound (TPC), total flavonoid (TFC), total anthocyanin (TACN), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging and ferric reducing antioxidant power (FRAP) values of Roselle. Distilled water, 70% ethanol, and 80% methanol used as conventional solvents for comparison. The results indicated that the DES prepared in molarity ratio (SAFAm) was the most efficient. Subsequently, this prominent DES selected for the optimization and the optimum extraction conditions were 1:3.6 molarity ratio, 0% additional water, and 10 mL solvent. TPC, TFC, TACN, FRAP, and DPPH radical scavenging at the optimum point were 233.26 mg GAE/g, 10.14 mg ECE/g, 10.62 mg D3S/g, 493.45 mmol ISE/g, and 343.41 mmol TE/g, respectively. The stability tests showed that anthocyanins were more stable in SAFAm. These findings revealed that SAFAm is an effective green solvent for the extraction of polyphenols from various plants.

Effects of simulated digestion on black chokeberry (Aronia melanocarpa (Michx.) Elliot) anthocyanins and intestinal flora

In this study, the changes of anthocyanin content, total phenols, antioxidant capacity, microbiota composition before and after digestion and intestine fermentation in stomach and intestine were studied. The results indicated that after simulated gastrointestinal digestion, compared with the original sample, the total phenol content and anthocyanin content of intestinal digestion group for 2 h (ID 2 group) decreased by 53.64% and 70.45%, respectively, DPPH inhibition rate was 32.75% and T-AOC values of the extracts decreased to 62.89U/mg. The anthocyanins were identified to be composed of cyanidin-3-arabinoside, cyanidin-3-galactoside, cyanidin-3-xyloside, and cyanidin-3-glucoside. Black Chokeberry (Aronia melanocarpa (Michx.) Elliot) anthocyanins significantly increased the relative richness of Bacteroides, promoted the growth of Bifidobacterium, Blautia, Faecalibacterium, and inhibited the growth of Prevotella, Megamonas, Escherichia/Shigella, etc. Anthocyanins have a positive regulatory effect on intestinal flora. These studies also provide essential information for the development of anthocyanin related health care products and drug products.

Bioactive Compounds and Bioactivities of Brassica oleracea L. var. Italica Sprouts and Microgreens: An Updated Overview from a Nutraceutical Perspective

Sprouts and microgreens, the edible seedlings of vegetables and herbs, have received increasing attention in recent years and are considered as functional foods or superfoods owing to their valuable health-promoting properties. In particular, the seedlings of broccoli (Brassica oleracea L. var. Italica) have been highly prized for their substantial amount of bioactive constituents, including glucosinolates, phenolic compounds, vitamins, and essential minerals. These secondary metabolites are positively associated with potential health benefits. Numerous in vitro and in vivo studies demonstrated that broccoli seedlings possess various biological properties, including antioxidant, anticancer, anticancer, antimicrobial, anti-inflammatory, anti-obesity and antidiabetic activities. The present review summarizes the updated knowledge about bioactive compounds and bioactivities of these broccoli products and discusses the relevant mechanisms of action. This review will serve as a potential reference for food selections of consumers and applications in functional food and nutraceutical industries.

Extraction of Carotenoids from Tomato Pomace via Water-Induced Hydrocolloidal Complexation

Agro-industrial waste is a largely untapped natural resource of bioactive compounds including carotenoids and pectin. However, conventional solvent extraction involves the excessive use of organic solvents, costly equipment, and tedious operation. These limitations of conventional extraction methods could be prospectively overcome by the carotenoid-pectin hydrocolloidal complexation. The complexation of lycopene and pectin was efficiently promoted in an aqueous environment, resulting in the colloidal complexes that can be subsequently recovered by sedimentation or centrifugation. In this study, the potential of carotenoid-pectin complexation on tomato pomace containing carotenoids and pectin was evaluated. Tomato pomace is a rich source of lycopene, β-carotene as well as pectin, making it suitable as the raw material for the carotenoid extraction. The extraction of carotenoid and pectin from tomato pomace was optimized using response surface methodology. The maximum recovery was 9.43 mg carotenoid fractions/100 g tomato pomace, while the purity of carotenoid-rich fractions was 92%. The antioxidant capacity of carotenoids extracted from the complexation method was found to be higher than that from the solvent extraction method. Moreover, extraction yield and antioxidant capacity of carotenoid obtained from the carotenoid-pectin complexation were comparable to that from solvent extraction. The carotenoid-pectin complexation is a promising green approach to valorize agro by-products for the extraction of valuable carotenoids.