The effect of household processing on the decline pattern of dimethomorph in pepper fruits and leaves

Bifenthrin Residues in Table Grapevine: Method Optimization, Dissipation and Removal of Residues in Grapes and Grape Leaves

The QuEChERS method was adjusted to determine bifenthrin residues in grapes and grape leaves. Extraction and cleanup procedures were optimized to decrease co-extracted materials and enhance the detection of bifenthrin. The method was validated per the European Union (EU) Guidelines criteria. Accuracy ranged from 98.8% to 93.5% for grapes and grape leaves, respectively. Precision values were 5.5 and 6.4 (RSDr) and 7.4 and 6.7 (RSDR) for grapes and grape leaves, respectively. LOQs (the lowest spiking level) were 2 and 20 µg/kg for grapes and grape leaves, respectively. Linearity as determination coefficient (R2) values were 0.9997 and 0.9964 for grapes and grape leaves, respectively, in a matrix over 1-100 µg/L range of analyte concentration. This was very close to the value in the pure solvent (0.9999), showing the efficiency of the cleanup in removing the co-extracted and co-injected materials; the matrix effect was close to zero in both sample matrices. Dissipation of bifenthrin was studied in a supervised trial conducted in a grapevine field during the summer of 2023 at the recommended dose and double the dose. Dissipation factor k values were 0.1549 and 0.1672 (recommended dose) and 0.235 and 0.208 (double dose) for grapes and grape leaves, respectively. Pre-harvest interval (PHI) was calculated for the Maximum Residue Limit (MRL) values of the EU database. Residues of bifenthrin were removed effectively from grapes using simple washing with tap water in a laboratory study. Residues reached the MRL level of 0.3 mg/kg in both washing treatments, running or soaking in tap water treatments for 5 min. Removal from leaves did not decrease residue levels to the MRL in grape leaves.

Residue Behavior of Chiral Fungicide Prothioconazole and Its Major Chiral Metabolite in Flour Product Processing

This study systematically investigates the stereoselective metabolism and residue behavior of chiral pesticide prothioconazole enantiomers during the steaming, baking, and frying of steamed buns, bread, and deep-fried dough sticks. The results show that steaming, baking, and frying can significantly promote the degradation of the prothioconazole enantiomers. In low- and high-concentration treatments, the degradation rates of prothioconazole enantiomers were over 96.0% and 45.4%, respectively, and the residual concentration of prothioconazole-desthio enantiomers was less than 32.7 μg/kg (excluding fried processing). During the processing of steamed buns, bread, and deep-fried dough sticks, the enantiomer fraction (EF) value of the prothioconazole enantiomer was close to 0.5, and the stereoselectivity was not significant. During the processing of steamed buns (low concentration), bread (low and high concentrations), and deep-fried dough sticks (low concentration), the stereoselectivity of prothioconazole-desthio was significant, and preferential enantiomer degradation occurred. Following the analysis of 120 flour product samples, the residual risk.

Dissipation, Metabolism, Accumulation, Processing and Risk Assessment of Fluopyram and Trifloxystrobin in Cucumbers and Cowpeas from Cultivation to Consumption

Fluopyram and trifloxystrobin are widely used for controlling various plant diseases in cucumbers and cowpeas. However, data on residue behaviors in plant cultivation and food processing are currently lacking. Our results showed that cowpeas had higher fluopyram and trifloxystrobin residues (16.48-247.65 μg/kg) than cucumbers (877.37-3576.15 μg/kg). Moreover, fluopyram and trifloxystrobin dissipated faster in cucumbers (half-life range, 2.60-10.66 d) than in cowpeas (10.83-22.36 d). Fluopyram and trifloxystrobin were the main compounds found in field samples, and their metabolites, fluopyram benzamide and trifloxystrobin acid, fluctuated at low residue levels (≤76.17 μg/kg). Repeated spraying resulted in the accumulation of fluopyram, trifloxystrobin, fluopyram benzamide and trifloxystrobin acid in cucumbers and cowpeas. Peeling, washing, stir-frying, boiling and pickling were able to partially or substantially remove fluopyram and trifloxystrobin residues from raw cucumbers and cowpeas (processing factor range, 0.12-0.97); on the contrary, trifloxystrobin acid residues appeared to be concentrated in pickled cucumbers and cowpeas (processing factor range, 1.35-5.41). Chronic and acute risk assessments suggest that the levels of fluopyram and trifloxystrobin in cucumbers and cowpeas were within a safe range based on the field residue data of the present study. The potential hazards of fluopyram and trifloxystrobin should be continuously assessed for their high residue concentrations and potential accumulation effects.

Dissipation, metabolism, accumulation, processing and risk assessment of fluxapyroxad in cucumber and cowpea vegetables from field to table

Understanding the residue fate of fluxapyroxad is critical for food safety and human health. The present study profiled the dissipation, metabolism, accumulation, removal and risk assessment of fluxapyroxad in cucumbers and cowpeas from field to table. Greenhouse-field trials suggested that fluxapyroxad dissipated faster in cucumbers than in cowpeas, and M700F008 was the only detected metabolite at <LOQ-37.92 μg/kg. Fluxapyroxad accumulated in cucumbers (average residue accumulation value, 1: 2.21: 1.16) and cowpeas (1: 1.33: 1.05) after repeated spraying. Peeling, washing and parboiling could remove fluxapyroxad from cucumbers and cowpeas (PF range, 0.16-0.85); however, fluxapyroxad was partly concentrated by stir-frying (PF range, 0.36-1.41). Moreover, fluxapyroxad residues increased with increasing pickling time. Chronic and acute risk assessments revealed that dietary exposure to fluxapyroxad was within the acceptable levels from cucumber and cowpea consumption. Given high residue levels and their potential accumulation, fluxapyroxad should be continuously monitored and assessed in the future.

A Comprehensive Review of Pesticide Residues in Peppers

Pesticides are chemicals that are used to control pests such as insects, fungi, and weeds. Pesticide residues can remain on crops after application. Peppers are popular and versatile foods that are valued for their flavor, nutrition, and medicinal properties. The consumption of raw or fresh peppers (bell and chili) can have important health benefits due to their high levels of vitamins, minerals, and antioxidants. Therefore, it is crucial to consider factors such as pesticide use and preparation methods to fully realize these benefits. Ensuring that the levels of pesticide residues in peppers are not harmful to human health requires rigorous and continuous monitoring. Several analytical methods, such as gas chromatography (GC), liquid chromatography (LC), mass spectrometry (MS), infrared spectroscopy (IR), ultraviolet-visible spectroscopy (UV-Vis), and nuclear magnetic resonance spectroscopy (NMR), can detect and quantify pesticide residues in peppers. The choice of analytical method depends on the specific pesticide, that is being tested for and the type of sample being analyzed. The sample preparation method usually involves several processes. This includes extraction, which is used to separate the pesticides from the pepper matrix, and cleanup, which removes any interfering substances that could affect the accuracy of the analysis. Regulatory agencies or food safety organizations typically monitor pesticide residues in peppers by stipulating maximum residue limits (MRLs). Herein, we discuss various sample preparation, cleanup, and analytical techniques, as well as the dissipation patterns and application of monitoring strategies for analyzing pesticides in peppers to help safeguard against potential human health risks. From the authors' perspective, several challenges and limitations exist in the analytical approach to monitoring pesticide residues in peppers. These include the complexity of the matrix, the limited sensitivity of some analytical methods, cost and time, a lack of standard methods, and limited sample size. Furthermore, developing new analytical methods, using machine learning and artificial intelligence, promoting sustainable and organic growing practices, improving sample preparation methods, and increasing standardization could assist efficiently in analyzing pesticide residues in peppers.

Effects of different boiling processes on chemical compositions of Lilii Bulbus soup

Lilii Bulbus, an edible Chinese herbal medicine, has a long history in medicine. However, research on effectively boiling Lilii Bulbus is rare. To make the more nutritious Lilii Bulbus soup, the optimized boiling process, using an alternate heating mode by decoction pot carrying a mixture of water and Chinese liquor at the ration of 9:1, was established in this study. Compared to the soup prepared by the daily process, the polysaccharide amount improved by 54%, and the total heavy metals decreased by 33.5% using the optimized boiling process. In addition, the total saponins at 34.3 μg/g were determined in the soup prepared by the optimized process. Meanwhile, the colchicine content in the boiled Lilii Bulbus soup was undetectable using the optimized process. This research performs an optimized boiling process for making Lilii Bulbus soup, and provides a reference for generating high commercial value from Lilii Bulbus soup in the future.

The dissipation, processing factors, metabolites, and risk assessment of pesticides in honeysuckle from field to table

Globally, honeysuckle is consumed as a food and administered as a medicinal agent. However, pesticide residues in honeysuckle limit its application and development of the honeysuckle industry, affecting food safety and endangering human health. Here, the degradation kinetics of 11 typical pesticides, including insecticides, fungicides, and an acaricide, in honeysuckle were investigated. The half-lives of pesticides in Henan and Liaoning fields were 1.90-4.33 and 2.05-4.62 d, respectively. The processing factors (PFs) of these pesticides after oven, sun, and shade drying ranged from 3.52 to 11.2. After decocting, the PFs of the pesticides were <1. Twenty degradation products were identified using ultra high performance liquid chromatography-quadrupole time-of-flight mass spectrometry, and pathways were proposed based on drying and decoction. The ecotoxicities of the degradation products were evaluated using the Toxicity Estimation Software Tool. Finally, the acute hazard indices of these pesticides, as determined via dietary exposure assessment combined with the PFs, were 0.227 and 0.911 for adults and children, respectively. Thus, special populations, such as children, require particularly careful risk control in terms of dietary exposure.

Antifungal Exploration of Quinoline Derivatives against Phytopathogenic Fungi Inspired by Quinine Alkaloids

Enlightened from our previous work of structural simplification of quinine and innovative application of natural products against phytopathogenic fungi, lead structure 2,8-bis(trifluoromethyl)-4-quinolinol (3) was selected to be a candidate and its diversified design, synthesis, and antifungal evaluation were carried out. All of the synthesized compounds Aa1-Db1 were evaluated for their antifungal activity against four agriculturally important fungi, Botrytis cinerea, Fusarium graminearum, Rhizoctonia solani, and Sclerotinia sclerotiorum. Results showed that compounds Ac3, Ac4, Ac7, Ac9, Ac12, Bb1, Bb10, Bb11, Bb13, Cb1. and Cb3 exhibited a good antifungal effect, especially Ac12 had the most potent activity with EC₅₀ values of 0.52 and 0.50 μg/mL against S. sclerotiorum and B. cinerea, respectively, which were more potent than those of the lead compound 3 (1.72 and 1.89 μg/mL) and commercial fungicides azoxystrobin (both >30 μg/mL) and 8-hydroxyquinoline (2.12 and 5.28 μg/mL). Moreover, compound Ac12 displayed excellent in vivo antifungal activity, which was comparable in activity to the commercial fungicide boscalid. The preliminary mechanism revealed that compound Ac12 might cause an abnormal morphology of cell membranes, an increase in membrane permeability, and release of cellular contents. These results indicated that compound Ac12 displayed superior in vitro and in vivo fungicidal activities and could be a potential fungicidal candidate against plant fungal diseases.

Dissipation behavior, residue distribution, and dietary risk assessment of fluopimomide and dimethomorph in taro using HPLC-MS/MS

Dimethomorph is a morpholine broad-spectrum fungicide and effectively controls taro blight, cucumber downy mildew, rice blast disease, and others. Fluopimomide is a newly developed broad-spectrum fungicide to primarily control oomycetes and rhizoctonia diseases. Taro, one of the earliest cultivated crops, is a staple food in Africa, Oceania, and Asia. Recently, a commercial suspension concentrate formulation containing 15% fluopimomide and 25% dimethomorph has been registered in China, the second largest taro producer in the world. The objective of this study was to develop a high-performance liquid chromatography tandem mass spectrometry method to detect the residues of fluopimomide and dimethomorph concurrently in taro samples. The results showed that the average recoveries of fluopimomide and dimethomorph ranged from 83 to 108%, and relative standard deviations (RSD) ranged from 1 to 11%. The limit of quantitation (LOQ) was 0.01 mg kg^-1 for the two compounds. The dissipation results demonstrated that both fluopimomide and dimethomorph in taro degraded rapidly in taro fields, and the residues of the two fungicides were below the LOQ within 14 days post-application. The final residue levels of fluopimomide and dimethomorph in taro were lower than 0.066 mg kg^-1 28 days post-application. For dietary risk assessments, the dietary structure of different genders and age of people in China exposure risk assessment and whole diet exposure risk assessment shows that the risk quotient (RQ) values were substantially lower than 100%, suggesting that the long-term risks of fluopimomide/dimethomorph mixed formulation in taro at the recommended dosage were negligible. In summary, our combined results from the dissipation behaviors, terminal residues, and dietary risk assessments provide the critical empirical data for the establishment of the maximum residue levels (MRLs) of the two broad-spectrum fungicides in taro, a traditional food for African, Oceanic, and South Asian cultures.

Residue changes and processing factors of eighteen field-applied pesticides during the production of Chinese Baijiu from rice

The fate of eighteen pesticides in field-collected rice samples during Chinese Baijiu production was systematically studied. The results indicated that steeping decreased flonicamid residue by 73.2% due to its high water-solubility and low octanol/water partition coefficient. The steaming step reduced pesticide residues by 32.0%-75.3% through evaporation or thermal degradation. After steaming, the pesticide residues were further reduced by 39.8-74.2% in fermentation which might be caused by biological degradation. In addition, distillation was shown to be most effective, responsible for greater than 90% losses of the remaining pesticide residues. The processing factors (PFs) were generally lower than 1 for different processes and the whole procedure. These results revealed that the procedure of Chinese Baijiu production could dramatically decrease residues of all the eighteen pesticides. Overall, this study provide important references for monitoring pesticide residue levels during the production of Chinese Baijiu from rice, and ensuring proper risk assessment from pesticide contamination.

Dissipation and Risk Assessment of Multiresidual Fungicides in Grapes under Field Conditions

Grapes are among the most popular fruits globally, and various fungicides are widely applied to grape crops. As such, the presence of multiple fungicide residues and dietary risks in grapes has become the focus of significant attention. In this study, an easy-to-implement and sensitive UPLC-MS/MS approach was developed to simultaneously determine pyraclostrobin, dimethomorph, cymoxanil, cyazofamid and its metabolite CCIM in grapes via QuEChERS. This approach achieved 78.1-106.0% recovery and a 0.01 mg kg^-1 limit of quantitation (LOQ). Field trials revealed that these compounds had degradation half-lives ranging from 0.9 to 13.3 days. And their terminal residues ranging from < LOQ to 1.36 mg kg^-1 were below the official maximum residue limit (MRL) in China. The short-term risk for each tested fungicide was below 54%. The long-term risk of individual chemicals ranged from 0.0086% to 3.1%, and their cumulative risk was 4.4%. Results indicated that the dietary risk of these fungicides in grapes was minor.

Degradation of triadimefon and residue levels of metabolite triadimenol: tracing rapeseed from harvesting and storage to household oil processing

BACKGROUND

Triadimefon is a fungicide used in agriculture to control fungal diseases such as sclerotinia sclerotiorum.

RESULTS

In field trials, rape plants were sprayed with triadimefon at three different dosages during the flowering period. The degradation of triadimefon and the residue levels of its metabolite, triadimenol, in rapeseed obtained from harvesting, storage, and household oil processing were traced and evaluated. The pesticides were determined by high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS) at each processing step. Triadimefon degraded completely and only its metabolite, triadimenol, was detected in rapeseed after harvesting. The stability of triadimenol in rapeseed was studied at weekly storage intervals, from 0 to 7 weeks at ambient temperature (25 °C) and freezing temperature (-20 °C), respectively. Storage temperature had an important influence on the residue levels of triadimenol. The processing factor (PF) was defined as the ratio of pesticide residue levels in rapeseed to rapeseed oil levels during household oil processing. The average PF of triadimenol was about 0.96 for a hot pressing technique and 0.88 for a cold pressing technique.

CONCLUSION

Different storage conditions and food processing could reduce the pesticide level to a greater or lesser extent. However, it is not easy to eliminate or significantly weaken triadimenol once triadimefon has degraded completely. © 2018 Society of Chemical Industry.

Dissipation and residues of fluazinam and dimethomorph in potatoes, potato plants, and soil, determined by QuEChERS ultra-performance liquid chromatography tandem mass spectrometry

Fluazinam and dimethomorph 35% suspension concentrate (SC) is a new combined fungicide formulation introduced in China to improve fungicidal efficacy and decrease the risk of resistance in potatoes. Fluazinam and dimethomorph dissipation and residues in potatoes, potato plants, and soil under field conditions were determined by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). Fluazinam and dimethomorph 35% SC was applied at two doses to potatoes and soil in Ningxia Autonomous Region and Anhui Province, China. Fluazinam and dimethomorph dissipation fitted first-order kinetics, and the fluazinam half-lives in potato plants and soil were 3.3-5.4 and 9.4-9.5 days, respectively. The dimethomorph half-lives in potato plants and soil were 2.1-2.6 and 5.9-8.6 days, respectively. Fluazinam and dimethomorph 35% SC was sprayed onto potato plants three or four times at application rates of 420 and 630 g a.i. ha^-1 with 7 days between applications. Potato and soil samples were collected at 3, 7, and 14 days after the last application. Potatoes and soil had fluazinam concentrations of < 0.01 and < 0.05-0.183 mg kg^-1, respectively, and dimethomorph concentrations of < 0.01 and 0.129-0.677 mg kg^-1, respectively. The final fluazinam and dimethomorph concentrations in potatoes were below the EU maximum residue limits (0.02 and 0.05 mg kg^-1, respectively) 3 days after application. Fluazinam and dimethomorph can therefore be applied to potatoes at the recommended doses.

Residual Behaviors of Six Pesticides in Shiitake from Cultivation to Postharvest Drying Process and Risk Assessment

The dissipation of six pesticides (carbendazim, thiabendazole, procymidone, bifenthrin, λ-cyhalothrin, and β-cyfluthrin) in shiitakes from cultivation to postharvest drying process was investigated, and the dietary exposure risk was estimated thereafter. The field trial study indicates that the half-lives of carbendazim, thiabendazole, and procymidone were much shorter than those of bifenthrin, λ-cyhalothrin, and β-cyfluthrin. Furthermore, the effects of two drying processes on the residues and processing factors (PFs) were investigated. The results showed that hot-air drying resulted in higher residues than sunlight exposure drying. Both drying processes led to pesticide residue concentration (with PF > 1), except for thiabendazole upon sunlight exposure treatment. The estimated daily intakes (EDIs) ranged from 0.06% of the acceptable daily intake (ADI) for thiabendazole to 42.43% of the ADI for procymidone. The results show that the six pesticide residues in dried shiitakes are still within acceptable levels for human consumption on the basis of a dietary risk assessment.